Skip to content

Latest commit

 

History

History
80 lines (66 loc) · 3.71 KB

README.md

File metadata and controls

80 lines (66 loc) · 3.71 KB
Raw

Testsuite

This workspace contains on-target tests using defmt-test.

The tests run on the NUCLEO-WL55JC2, you can find a place purchase this here.

These tests will run automatically as part of CI for every pull-request.

Quickstart

  • rustup target add --toolchain stable thumbv7em-none-eabi (rustup)
  • cargo install probe-rs --features cli (probe-rs)
  • Linux users: Add udev rules
# /etc/udev/rules.d/99-stm.rules
SUBSYSTEM=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="374e", MODE="0666"
  • Linux users: run sudo udevadm control --reload-rules && sudo udevadm trigger
  • Connect the nucleo board to your PC via USB
  • cargo test -p testsuite --target thumbv7em-none-eabi --bin pka

Sample output

$ DEFMT_LOG=info cargo test -p testsuite --target thumbv7em-none-eabi --bin pka
    Finished dev [optimized + debuginfo] target(s) in 0.01s
     Running `probe-rs run --chip STM32WLE5JCIx --connect-under-reset target/thumbv7em-none-eabi/debug/pka`
(HOST) INFO  flashing program (17.31 KiB)
(HOST) INFO  success!
────────────────────────────────────────────────────────────────────────────────
0.000008 INFO  (1/10) running `ecdsa_sign`...
└─ pka::tests::__defmt_test_entry @ testsuite/src/pka.rs:60
0.108633 INFO  (2/10) running `ecdsa_sign_nb`...
└─ pka::tests::__defmt_test_entry @ testsuite/src/pka.rs:60
0.217258 INFO  (3/10) running `ecdsa_sign_ram_error`...
└─ pka::tests::__defmt_test_entry @ testsuite/src/pka.rs:60
0.436387 INFO  (4/10) running `ecdsa_sign_mode_error`...
└─ pka::tests::__defmt_test_entry @ testsuite/src/pka.rs:60
0.655516 INFO  (5/10) running `ecdsa_verify`...
└─ pka::tests::__defmt_test_entry @ testsuite/src/pka.rs:60
0.874646 INFO  (6/10) running `ecdsa_verify_nb`...
└─ pka::tests::__defmt_test_entry @ testsuite/src/pka.rs:60
1.093774 INFO  (7/10) running `ecdsa_verify_ram_err`...
└─ pka::tests::__defmt_test_entry @ testsuite/src/pka.rs:60
1.202398 INFO  (8/10) running `ecdsa_verify_mode_err`...
└─ pka::tests::__defmt_test_entry @ testsuite/src/pka.rs:60
1.311021 INFO  (9/10) running `ecdsa_verify_invalid_err`...
└─ pka::tests::__defmt_test_entry @ testsuite/src/pka.rs:60
1.527159 INFO  (10/10) running `ecdsa_doc_keypair`...
└─ pka::tests::__defmt_test_entry @ testsuite/src/pka.rs:60
1.845845 INFO  all tests passed!
└─ pka::tests::__defmt_test_entry @ testsuite/src/pka.rs:60
────────────────────────────────────────────────────────────────────────────────
  (HOST) INFO  device halted without error

SubGhz Tests

The subghz on-target tests require two nucleo boards, one for transmitting, and one for receiving. Run the subghz binary twice on two different boards.

Assuming both boards are connected to the same system you will have to pass a specific probe to each.

$ probe-rs list
The following devices were found:
[0]: STLink V3 (VID: 0483, PID: 374e, Serial: 001D00145553500A20393256, STLink)
[1]: STLink V3 (VID: 0483, PID: 374e, Serial: 001600345553500A20393256, STLink)
$ DEFMT_LOG=info cargo test -p testsuite --target thumbv7em-none-eabi --bin subghz -- --probe 001D00145553500A20393256
$ DEFMT_LOG=info cargo test -p testsuite --target thumbv7em-none-eabi --bin subghz -- --probe 001600345553500A20393256