Skip to content

Latest commit

 

History

History
212 lines (160 loc) · 8.17 KB

day.11.creating.a.service.principal.cert.auth.windows.md

File metadata and controls

212 lines (160 loc) · 8.17 KB
Raw

Day 11 - Creating an Azure Service Principal that uses Certificate Authentication (Windows Edition)

In our previous article Day 9 we created a Service Principal with Certificate Authentication in Linux. Today we are covering how to create a Service Principal that uses a PEM Certificate for authentication using the Azure CLI on Windows.

NOTE: This article was tested and written for a Windows Host running Windows 10.


In this installment, we'll be going over the following.

Installing OpenSSL using Chocolatey
Generate a new PEM Certificate
Create the Service Principal
Test the Service Principal
Updating a Service Principal Certificate
Conclusion

SPONSOR: Need to stop and start your development VMs on a schedule? The Azure Resource Scheduler let's you schedule up to 10 Azure VMs for FREE! Learn more HERE

Install OpenSSL using Chocolatey

Open up an Elevated PowerShell prompt and run the following command to install openssl using Chocolatey

choco install openssl -y

NOTE: As of the writing of this article, the following message will appear when installing openssl.

WARNING: OPENSSL_CONF has been set to C:\Program Files\OpenSSL-Win64\openssl.cfg

the openssl.cfg file by default is in C:\Program Files\OpenSSL-Win64\openssl.cfg which is why the path in the OPENSSL_CONF variable is updated in the section below.


Run the following command to update the Path System Variable to include the path to the openssl executable.

$CurrentPath = (Get-ItemProperty `
-Path 'Registry::HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\Environment' -Name PATH).path ; `
$NewPath = "$CurrentPath;C:\Program Files\OpenSSL-Win64\bin" ; `
Set-ItemProperty `
-Path 'Registry::HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\Environment' `
-Name PATH `
-Value $NewPath

Run the following command to update the OPENSSL_CONF System Variable to point to the openssl.cfg file.

Set-ItemProperty `
-Path 'Registry::HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\Environment' `
-Name OPENSSL_CONF `
-Value "C:\Program Files\OpenSSL-Win64\bin\openssl.cfg"

Next, close out of the elevated PowerShell Prompt before continuing.


Generate a new PEM Certificate

Open up an Elevated PowerShell prompt and cd into your home directory.

cd ~

Next run the following command to generate a self-signed PEM Certificate.

openssl req `
-utf8 `
-x509 `
-newkey rsa:2048 `
-sha256 `
-days 365 `
-nodes `
-subj "/C=AT/ST=Styria/L=Graz/O=100 Days of IaC/OU=Bloggers/CN=starkfell.github.io" `
-keyout key.pem `
-out cert.pem ; `
cat key.pem > iac-sp-cert.pem ; `
cat cert.pem >> iac-sp-cert.pem ; `
$PEM_Cert = Get-Content .\iac-sp-cert.pem ; `
$PEM_Cert | Out-File -Encoding ASCII .\iac-sp-cert.pem

NOTE: The two lines of code above that convert the iac-sp-cert.pem file to ASCII are necessary to ensure the certificate is saved in UTF-8 Format. Otherwise the file is saved in UTF16-LE and when you attempt to login as the service principal, you'll get the following encoding error message: 'ascii' codec can't encode characters in position 0-1: ordinal not in range(128).


You should get back the following output when the certificate is finished being generated.

Generating a RSA private key
..........+++++
...............................+++++
writing new private key to 'key.pem'
-----

If you run dir in your PowerShell Prompt you should see the following files.

-rw-rw-r-- 1 USERNAME USERNAME 1.4K Sep 12 09:29 cert.pem
-rw-rw-r-- 1 USERNAME USERNAME 3.1K Sep 12 09:29 iac-sp-cert.pem
-rw------- 1 USERNAME USERNAME 1.7K Sep 12 09:29 key.pem

NOTE: The cert.pem and key.pem files are no longer needed as they are combined together in the iac-sp-cert.pem file.


Create the Service Principal

Run the following command to generate a new Service Principal using the PEM Certificate.

az ad sp create-for-rbac `
--role "contributor" `
--name "iac-sp" `
--cert @iac-sp-cert.pem

You should get back something similar to what is shown below.

Changing "iac-sp" to a valid URI of "http:https://iac-sp", which is the required format used for service principal
names Certificate expires 2020-09-12 09:43:25+00:00. Adjusting SP end date to match.
Creating a role assignment under the scope of "/subscriptions/00000000-0000-0000-0000-000000000000"
  Retrying role assignment creation: 1/36
  Retrying role assignment creation: 2/36
  Retrying role assignment creation: 3/36
{
  "appId": "00000000-0000-0000-0000-000000000000",
  "displayName": "iac-sp",
  "name": "http:https://iac-sp",
  "password": null,
  "tenant": "00000000-0000-0000-0000-000000000000"
}

Note: If you attempt to add certificate authentication to an existing Service Principal with password authentication, it will only add the certificate or overwrite the existing certificate associated with the Service Principal. Any existing Password authentication will still be valid.


Test the Service Principal

Run the command below and replace the --tenant value with either the FQDN or the GUID of your Azure Active Directory Tenant ID.

az login `
--service-principal `
-u http://iac-sp `
-p iac-sp-cert.pem `
--tenant 00000000-0000-0000-0000-000000000000

You should get back the following response verifying that you are logged in to the Azure Subscriptions as the Service Principal.

[
  {
    "cloudName": "AzureCloud",
    "id": "00000000-0000-0000-0000-000000000000",
    "isDefault": true,
    "name": "{AZURE_SUBSCRIPTION_NAME}",
    "state": "Enabled",
    "tenantId": "00000000-0000-0000-0000-000000000000",
    "user": {
      "name": "http:https://iac-sp",
      "type": "servicePrincipal"
    }
  }
]

NOTE: Don't forget to logout and log back in to Azure with your normal credentials after testing the Service Principal; otherwise, you will be stay logged in as the Service Principal and you may find that the rights of the Service Principal are limited compared to your own.


Updating a Service Principal Certificate

Updating the Certificate for the Service Principal is as easy as creating a new PEM certificate and then running the command to create a new Service Principal using the commands demonstrated earlier. When the command to create a new Service Principal is ran, you'll notice the idempotence of Azure CLI as the Service Principal will be updated instead of attempting to create a new one.

Changing "iac-sp" to a valid URI of "http:https://iac-sp", which is the required format used for service principal
names Certificate expires 2020-09-12 09:50:29+00:00. Adjusting SP end date to match.
Found an existing application instance of "00000000-0000-0000-0000-000000000000". We will patch it
Creating a role assignment under the scope of "/00000000-0000-0000-0000-000000000000"
  Role assignment already exits.

{
  "appId": "00000000-0000-0000-0000-000000000000",
  "displayName": "iac-sp",
  "name": "http:https://iac-sp",
  "password": null,
  "tenant": "00000000-0000-0000-0000-000000000000"
}

Conclusion

If you plan on deploying IaC to the Azure Cloud using IaC Tools such as ARM, Ansible, or Terraform, you may want to consider using Certificate Based Authentication for your Service Principals as an alternative to standard Password Authentication. The steps above can be easily compiled together into a script whereby you would be able to generate new Certificates for your Service Principals on the fly for scenarios such as:

  • Deploying a new Service Principals
  • Resetting an expired Service Principal Certificate
  • Resetting a compromised Service Principal Certificate