Lists (8)
Stars
STM32 library for working with OLEDs based on SSD1306, SH1106, SH1107 and SSD1309, supports I2C and SPI
A digital Oscilloscope designed using Zedboard (Zynq7000Soc). The input signal is sample and processed using Zedboard and the sample data is displayed using a Graphical User Interface which mimics …
PYNQ enabled Genesys ZU Open Source Instrument, based on Pavel Demin's Red Pitaya Notes workflow.
Capture data from multiple ADCs concurrently using an FPGA. Stream the captured data out over ethernet + UDP. Tested on the Spartan 6 XC6SLX9, Wiznet W5500, and MCP3002 ADC.
FPGA based data logger (LCD, ADC, UART & I2C)
FPGA firmware + PC software to collect & archive data from high-energy physics experiments
Building a simple oscilloscope using FPGA board and PCB.
A software oscilloscope and signal analysis toolset
Packetcraft Open Source products: Controller, Host, Profile and Mesh
A voltage source imitating the behaviour of a battery
5MHz to 2.1GHz RF Synthesizer with modulation capability
A very small, cheap and easy to build spectrum analyzer with remarkable performance
Implementation of an round robin pre-emptive scheduler and build environment for ARM Cortex M4 controllers.
A general utility library from redfelineninja.org.uk
Multi instrument datalogging platform
Enhanced BLE-UART module with AT command
X-Knob - A smart knob based on LVGL UI library, supports Smart Home(MQTT) and Surface Dial (BT) // LVGL UI 框架下的力反馈智能旋钮 (smartknob + X-TRACK)
Embedded graphics library to create beautiful UIs for any MCU, MPU and display type.
LittleVgl test, Custom STM32F103RC breakout Board. ILI9341 display over SPI with DMA. rotary encoder. KEIL RTX v5.
Example software projects to accompany the Armv8-M architecture User Guides
Project generators for various embedded tools (IDE). IAR, uVision, Makefile, CoIDE, Eclipse and many more in the roadmap!