Accessible from the main menu or when viewing a log

• Add ABA to ASCII conversion
• Add Binary to HEX conversion

• Fix a bug where the leading zeros do not get displayed on the initial PIN brute force landing page
  • They were already transmitted properly and tracked properly in the status page this is only a cosmetic fix to avoid confusion.

• Add BRUTEFORCING of PIN codes

• ADD allow entering a numeric pin directly into Experimental TX Mode
• ADD toggle to allow disabling of safe mode
  • When safe mode is on after every capture/transmission the device reboots
  • When safe mode is off the device does not reboot(not always stable)
  • The advantage of disabling safe mode would be allowing captures of very fast consecutive keypad entries
• Transition to esp8266 2.4.1 board manager package
  • esp8266 board manager package 2.4.1 has some bug fixes but may have also introduced some
  • I suggest leaving safe mode on(default) for real world engagements where a physical reboot may be difficult to perform

NOTE: This firmware along with future firmware will be compiled using the latest esp8266 2.4.1 board manager(unless otherwise noted) and may not be 100% stable, please refer to the previous release if you encounter any major issues!

Release 1.0.91 - Add support to automatically decode common 8 bit pincodes

Add the ability to configure the Experimental TX Timings
Wiegand Data Pulse Width (default 40us)
Wiegand Data Interval (default 2ms)

Improved Magstripe Decoding of ABA Track 2 data
Now displays data decoded from both directions instead of making an attempt to choose a direction.

Now attempts to auto convert MagStripe binary to ASCII
if countedBits == 248 then attempt to convert Track 2 ABA encoding to ASCII

Add Magstripe Decode Link if countedBits == 248

Decode Track 2 ABA
Set Default Buffer to 256bit

Software now attempts to auto detect and decode entries from common keypads