radiod.conf.retro

# Raspberry Pi Internet Radio Configuration File (40 Pin version)
# $Id: radiod.conf.retro,v 1.2 2017/05/19 10:34:21 bob Exp $

# Configuration file for version 5.4 onwards
# 40 pin version to support IQ Audio and other sound cards

[RADIOD]

# loglevel is CRITICAL,ERROR,WARNING,INFO,DEBUG or NONE
loglevel=DEBUG

# Startup option either RADIO or MEDIA (USB stick)
startup=RADIO

# Set date format, US format =  %H:%M %m/%d/%Y
dateformat=%H:%M %d/%m/%Y

# Volume range 10, 20, 25, 50 or 100 
volume_range=50

# MPD port number (Do not change unless MPD reconfigured)
mpdport=6600

# Remote control communication  host and port Default localhost 5100
remote_control_host=localhost
remote_control_port=5100

# Remote control UDP server listen host either 0.0.0.0 (All interfaces) or localhost
remote_listen_host=localhost

# Output LED for remote control, default GPIO 11 (pin 23) or
# GPIO 13 (pin 33) for AdaFruit plate or PiFace CAD (40 pin RPi needed)
# remote_led=0 is no output LED 
remote_led=0

# Display playlist number in brackets yes or no 
display_playlist_number=no

# Station name source, either from the stream (stream) or use playlist names (list)
station_names=list

# Background colours (If supported) See Adafruit RGB plate
# options OFF, RED, GREEN, BLUE, YELLOW, TEAL, VIOLET, WHITE 
bg_color=WHITE
mute_color=VIOLET
shutdown_color=TEAL
error_color=RED
search_color=GREEN
info_color=BLUE
menu_color=YELLOW
source_color=TEAL
sleep_color=OFF

# The i2cbackpack is either ADAFRUIT or PCF8574
#i2c_backpack=PCF8574
i2c_backpack=ADAFRUIT

# The i2c_address overides the default i2c address. 0x00 = use default
# Some backpacks use other addresses such as 0x3F, then set i2c_address=0x3F
i2c_address=0x00

# Speech for visually impaired or blind listeners, yes or no
# Needs espeak package - sudo apt-get install espeak
speech=yes
# Speech volume as a percentage of the normal MPD volume
speech_volume=60
# Verbose - yes = each station change is spoken
verbose=no

# MPD version 0.16 requires the mpc load command to use the playlist extension
# so set to yes, MPD version 0.19 does not use the playlist extension so 
# set it to no
use_playlist_extensions=no

# Switch settings for 40 pin version (support for IQAudio)
menu_switch=25
mute_switch=4
up_switch=17
down_switch=10
left_switch=14
right_switch=15

# Auxillary switch GPIO, 0 = not used
aux_switch=0

# LCD GPIO connections for 40 pin version of the radio 
#lcd_select=7
#lcd_enable=8
#lcd_data4=5
#lcd_data5=6
#lcd_data6=12
#lcd_data7=13

# LCD screen width, 0 use program default. Usual settings 16 or 20
lcd_width=0

# Some rotary switches do not work well with the standard rotary class
# Rotary encoder driver. Set to "alternative" to use the alternative rotary encoder class
rotary_class=standard
#rotary_class=alternative

# The following settings are only used by the retro_radio.py program
# Uncomment to use - change GPIO assignments as required
# RGB Status LED GPIO settings
rgb_red=23
rgb_green=27
rgb_blue=22

# Menu rotary switch GPIO settings (retro_radio.py only)
# Uncomment to use - change GPIO assignments as required
menu_switch_value_1=24
menu_switch_value_2=8
menu_switch_value_4=7

[AIRPLAY]

# Airplay activation yes or no
airplay=yes

# Mixer preset volume for radio and media player if using sound card
# Set to 0 if using onboard audio or USB sound dongle.
# If using a sound card set to 100% initially and adjust as neccessary
mixer_volume=90

# Mixer volume ID (Airplay) Use command 'amixer controls | grep -i volume'
#                           to identify mixer volume control ID
mixer_volume_id=1