Skip to content

Latest commit

 

History

History
24 lines (23 loc) · 1.36 KB

README.md

File metadata and controls

24 lines (23 loc) · 1.36 KB

HDC1080-sensor-controller

The sensor controller is designed to work with the HDC1080 sensor, using the Sensor Controller Engine of CC2640R2F MCU.

  • Project name: HDC1080 sensor
  • Project file: hdc1080_sensor.scp
  • Operating system: TI-RTOS
  • Target chip: CC2640R2F, package QFN48 7x7 RGZ
  • I2C0_SCL - pin 11; I2C0_SDA - pin 10

How to generate project files.

In order to generate all project files, you must:

  • Launch “Sensor Controller Studio” (SCS) using the hdc1080_sensor.scp project file.
  • In the SCS program, click on the “Code Generator” button. SCS will create a scif_files folder (if it did not exist before) and generate all the necessary files in it (except for the readme file).
  • The file “scif_hdc1080_how_to_use.html” contains information on using the controller.

Software tools:

  • Sensor Controller Studio v2.7.0.155

Debugging:

  • The project was debugged on the CC2640R2-LAUNCHXL debug board.

Connection to CC2640R2-LAUNCHXL board:

  • HDC1080 / pin1 - SDA / DIO5 + PULUP 10K
  • HDC1080 / pin2 - GND
  • HDC1080 / pin5 - 3.3V
  • HDC1080 / pin6 - SCL / DIO4 + PULUP 10K

Used in the project: