Share your [pid-vid] for your controller

[o0Zz]

Hello there,

You have added a new controller to sys-con and want to share it with others, this is the place to be ;)
(These controllers will be merged regularly - so they will be part of the main project and you will not have to maintain them)

Have fun !

[texita]

https://www.powera.com/p/nintendo/nintendo-switch/controllers/wired/wired-controller-for-nintendo-switch-white-1517033-01/

[20d6-a711] ;PowerA Core (Plus) Wired Controller SKU: 1517033-01
b=2
a=3
x=4
y=1
l=5
r=6
zl=7
zr=8
minus=9
plus=10
capture=14
home=13
lstick_click=11
rstick_click=12

[ness151]

https://www.amazon.com/HORI-Real-Arcade-Pro-PlayStation-4/dp/B00SULMRI4
[0f0d-008b] ; Hori Real Arcade Pro 4
b=2
a=3
x=4
y=1
l=5
r=6
zl=7
zr=8
minus=12
plus=10
capture=9
home=13
lstick_click=
rstick_click=

https://www.amazon.com/Qanba-Drone-PlayStation-4/dp/B01I0GEDEY
[2c22-2003] ;Qanba Drone 1
b=1
a=2
x=4
y=3
l=5
r=6
zl=7
zr=8
minus=9
plus=10
capture=11
home=13
lstick_click=
rstick_click=

I use these exclusively for fighting games on the switch, hence why the sticks aren't mapped to anything

[o0Zz]

Thank you for this share, it will be added to next version. What you means by "Why the sticks aren't mapped" ? I assume, your sticks are properly working, correct ?

[ness151]

No, as you will see in the button input I have lstick_click=
rstick_click=

Empty. My inputs are all working correctly.

[o0Zz]

Yes, that's expected, in fact you can remove those 2 lines, it won't change anything. If you look in the [default] section you will find all the possible inputs you can use, there are about 30 and most of the time you will not need to bind all of them. Regarding rstick_click/lstick_click, these are the buttons under the sticks (when you press a stick), but as you mentioned, there is no similarity on arcade controllers, most of the time you can't click on the stick, so i'm not surprise these binding are not used.

[tirom97121]

Hello everybody, i want to set up this Nintendo 64 adapter on the Switch. Can someone help me?"

[tirom97121]

OK, thanks a lot, i made this settings:

[0E8F-3013] ;N64 PC adapter
controller_type=tarragon
B=3
A=2
L=7
R=8
ZL=9
plus=10
dpad_up=13
dpad_right=14
dpad_down=15
dpad_left=16
simulate_home=ZL+plus
right_stick_x=-Rz
right_stick_y=Z

could you help me to calibrate left stick?
In sys-con.nro on my switch, all controllers up to 32000 -32000, my n64 controler 20000 -20000 max when i push up down left right.

Thanks a lot.

[o0Zz]

Thank you for this share.
Could you try to "Calibrate" your stick using the calibrate feature included in the switch and see if it solve your issue. (Settings -> Controller & sensors -> Calibrate sticks). Let me know if it help.

[o0Zz]

I think it will change nothing to your problem, but probably controller_type=n64 would better match your use case. Isn't it ?

[tirom97121]

Same problem with n64 type, in this mode, C-Pad doesn't works too .

I tried to calibrate in switch settings, left stick make a Cube, a square with others controllers
Sorry for my bad english, i put a GIF to explain.

[o0Zz]

Please open a ticket that describe this problem and attach sys-con logs we will discuss on it in a dedicated ticket.