-
Notifications
You must be signed in to change notification settings - Fork 19
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
0 W load #122
Comments
This is likely related to #120 . The Load display is showing 0 most likely because WinNUT could not detect a supported method for calculating the load from your UPS. Please attach the latest log with a session of you connecting to your UPS, and also please upload the output from the variables list (in the Files menu.) Thank you! |
Hi @Jefronty, we've had a Pre-Release of WinNUT since we last interacted, and I wanted to see if you're still experiencing this issue. Please let me know when you can. |
FINAL EDIT: I am an absolute pancake. Everything is working fine. Apparently this UPS simply doesn't register loads below 5% of capacity. Everything seems to work with a bigger load applied. -- original post -- @gbakeman I have the same issue, APC Back-UPS BX2200MI (Nov 23) connected through a Synology (DSM 6.2) NAS. I would like to note that this is a replacement UPS, I was previously using a few years older version of the APC Back-UPS BX750MI (mid-19) which battery just died, prompting this replacement. WinNUT 2.0 was working perfectly with that UPS on this same unit. Just trying to clarify nothing in the setup changed aside from switching out the UPS, and it used to work. I have the 0%/0W load issue, immediately since connecting the new NAS. I just updated WinNUT to Pre-Release v2.3.8834, the problem persists. I feel the battery voltage may be wrong as well, shouldn't it be 12V ? I honestly don't know. Additionally, it has been stuck on 97% charge, which could be UPS self-protection or a wrong reading, by now it should be fully charged. EDIT: both these things are a non-issue, voltage is correct, so is charge % UPS variablesups (American Power Conversion/Back-UPS BX2200MI/Unknown) battery.charge (Description unavailable) : 97 battery.charge.low (Description unavailable) : 10 battery.mfr.date (Description unavailable) : 2001/01/01 battery.runtime (Description unavailable) : 3701 battery.runtime.low (Description unavailable) : 120 battery.type (Description unavailable) : PbAc battery.voltage (Description unavailable) : 28.4 battery.voltage.nominal (Description unavailable) : 24.0 device.mfr (Description unavailable) : American Power Conversion device.model (Description unavailable) : Back-UPS BX2200MI device.serial (Description unavailable) : 9B2342A06751 device.type (Description unavailable) : ups driver.name (Description unavailable) : usbhid-ups driver.parameter.pollfreq (Description unavailable) : 30 driver.parameter.pollinterval (Description unavailable) : 5 driver.parameter.port (Description unavailable) : auto driver.version (Description unavailable) : DSM6-2-25510-201118 driver.version.data (Description unavailable) : APC HID 0.95 driver.version.internal (Description unavailable) : 0.38 input.sensitivity (Description unavailable) : medium input.transfer.high (Description unavailable) : 295 input.transfer.low (Description unavailable) : 145 input.voltage (Description unavailable) : 232.0 input.voltage.nominal (Description unavailable) : 230 ups.beeper.status (Description unavailable) : disabled ups.delay.shutdown (Description unavailable) : 20 ups.load (Description unavailable) : 0 ups.mfr (Description unavailable) : American Power Conversion ups.mfr.date (Description unavailable) : 2023/10/19 ups.model (Description unavailable) : Back-UPS BX2200MI ups.productid (Description unavailable) : 0002 ups.realpower.nominal (Description unavailable) : 1200 ups.serial (Description unavailable) : 9B2342A06751 ups.status (Description unavailable) : OL CHRG ups.test.result (Description unavailable) : Done and passed ups.timer.reboot (Description unavailable) : 0 ups.timer.shutdown (Description unavailable) : -1 ups.vendorid (Description unavailable) : 051d Log (long)13/03/2024 14:24:35 [57840, Logger]: WinNUT Client 2.3.8834.24333 Log file init ==== History of 200 previous events ==== [1] 13/03/2024 14:24:23 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [2] 13/03/2024 14:24:23 [57840, UPS_Device]: input.frequency is not supported by server. [3] 13/03/2024 14:24:23 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [4] 13/03/2024 14:24:23 [57840, UPS_Device]: output.voltage is not supported by server. [5] 13/03/2024 14:24:23 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [6] 13/03/2024 14:24:23 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [7] 13/03/2024 14:24:23 [57840, WinNUT]: Updating UPS data for Form. [8] 13/03/2024 14:24:23 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [9] 13/03/2024 14:24:23 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [10] 13/03/2024 14:24:23 [57840, WinNUT]: Update Dial [11] 13/03/2024 14:24:23 [57840, WinNUT]: Update Icon [12] 13/03/2024 14:24:23 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [13] 13/03/2024 14:24:23 [57840, WinNUT]: Battery Status => Discharging [14] 13/03/2024 14:24:24 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [15] 13/03/2024 14:24:24 [57840, UPS_Device]: output.frequency is not supported by server. [16] 13/03/2024 14:24:24 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [17] 13/03/2024 14:24:24 [57840, UPS_Device]: input.frequency is not supported by server. [18] 13/03/2024 14:24:24 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [19] 13/03/2024 14:24:24 [57840, UPS_Device]: output.voltage is not supported by server. [20] 13/03/2024 14:24:24 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [21] 13/03/2024 14:24:24 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [22] 13/03/2024 14:24:24 [57840, WinNUT]: Updating UPS data for Form. [23] 13/03/2024 14:24:24 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [24] 13/03/2024 14:24:24 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [25] 13/03/2024 14:24:24 [57840, WinNUT]: Update Dial [26] 13/03/2024 14:24:24 [57840, WinNUT]: Update Icon [27] 13/03/2024 14:24:24 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [28] 13/03/2024 14:24:24 [57840, WinNUT]: Battery Status => Discharging [29] 13/03/2024 14:24:25 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [30] 13/03/2024 14:24:25 [57840, UPS_Device]: output.frequency is not supported by server. [31] 13/03/2024 14:24:25 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [32] 13/03/2024 14:24:25 [57840, UPS_Device]: input.frequency is not supported by server. [33] 13/03/2024 14:24:25 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [34] 13/03/2024 14:24:25 [57840, UPS_Device]: output.voltage is not supported by server. [35] 13/03/2024 14:24:25 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [36] 13/03/2024 14:24:25 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [37] 13/03/2024 14:24:25 [57840, WinNUT]: Updating UPS data for Form. [38] 13/03/2024 14:24:25 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [39] 13/03/2024 14:24:25 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [40] 13/03/2024 14:24:25 [57840, WinNUT]: Update Dial [41] 13/03/2024 14:24:25 [57840, WinNUT]: Update Icon [42] 13/03/2024 14:24:25 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [43] 13/03/2024 14:24:25 [57840, WinNUT]: Battery Status => Discharging [44] 13/03/2024 14:24:26 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [45] 13/03/2024 14:24:26 [57840, UPS_Device]: output.frequency is not supported by server. [46] 13/03/2024 14:24:26 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [47] 13/03/2024 14:24:26 [57840, UPS_Device]: input.frequency is not supported by server. [48] 13/03/2024 14:24:26 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [49] 13/03/2024 14:24:26 [57840, UPS_Device]: output.voltage is not supported by server. [50] 13/03/2024 14:24:26 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [51] 13/03/2024 14:24:26 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [52] 13/03/2024 14:24:26 [57840, WinNUT]: Updating UPS data for Form. [53] 13/03/2024 14:24:26 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [54] 13/03/2024 14:24:26 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [55] 13/03/2024 14:24:26 [57840, WinNUT]: Update Dial [56] 13/03/2024 14:24:26 [57840, WinNUT]: Update Icon [57] 13/03/2024 14:24:26 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [58] 13/03/2024 14:24:26 [57840, WinNUT]: Battery Status => Discharging [59] 13/03/2024 14:24:27 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [60] 13/03/2024 14:24:27 [57840, UPS_Device]: output.frequency is not supported by server. [61] 13/03/2024 14:24:27 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [62] 13/03/2024 14:24:27 [57840, UPS_Device]: input.frequency is not supported by server. [63] 13/03/2024 14:24:27 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [64] 13/03/2024 14:24:27 [57840, UPS_Device]: output.voltage is not supported by server. [65] 13/03/2024 14:24:27 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [66] 13/03/2024 14:24:27 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [67] 13/03/2024 14:24:27 [57840, WinNUT]: Updating UPS data for Form. [68] 13/03/2024 14:24:27 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [69] 13/03/2024 14:24:27 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [70] 13/03/2024 14:24:27 [57840, WinNUT]: Update Dial [71] 13/03/2024 14:24:27 [57840, WinNUT]: Update Icon [72] 13/03/2024 14:24:27 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [73] 13/03/2024 14:24:27 [57840, WinNUT]: Battery Status => Discharging [74] 13/03/2024 14:24:28 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [75] 13/03/2024 14:24:28 [57840, UPS_Device]: output.frequency is not supported by server. [76] 13/03/2024 14:24:28 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [77] 13/03/2024 14:24:28 [57840, UPS_Device]: input.frequency is not supported by server. [78] 13/03/2024 14:24:28 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [79] 13/03/2024 14:24:28 [57840, UPS_Device]: output.voltage is not supported by server. [80] 13/03/2024 14:24:28 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [81] 13/03/2024 14:24:28 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [82] 13/03/2024 14:24:28 [57840, WinNUT]: Updating UPS data for Form. [83] 13/03/2024 14:24:28 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [84] 13/03/2024 14:24:28 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [85] 13/03/2024 14:24:28 [57840, WinNUT]: Update Dial [86] 13/03/2024 14:24:28 [57840, WinNUT]: Update Icon [87] 13/03/2024 14:24:28 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [88] 13/03/2024 14:24:28 [57840, WinNUT]: Battery Status => Discharging [89] 13/03/2024 14:24:29 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [90] 13/03/2024 14:24:29 [57840, UPS_Device]: output.frequency is not supported by server. [91] 13/03/2024 14:24:29 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [92] 13/03/2024 14:24:29 [57840, UPS_Device]: input.frequency is not supported by server. [93] 13/03/2024 14:24:29 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [94] 13/03/2024 14:24:29 [57840, UPS_Device]: output.voltage is not supported by server. [95] 13/03/2024 14:24:29 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [96] 13/03/2024 14:24:29 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [97] 13/03/2024 14:24:29 [57840, WinNUT]: Updating UPS data for Form. [98] 13/03/2024 14:24:29 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [99] 13/03/2024 14:24:29 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [100] 13/03/2024 14:24:29 [57840, WinNUT]: Update Dial [101] 13/03/2024 14:24:29 [57840, WinNUT]: Update Icon [102] 13/03/2024 14:24:29 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [103] 13/03/2024 14:24:29 [57840, WinNUT]: Battery Status => Discharging [104] 13/03/2024 14:24:30 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [105] 13/03/2024 14:24:30 [57840, UPS_Device]: output.frequency is not supported by server. [106] 13/03/2024 14:24:30 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [107] 13/03/2024 14:24:30 [57840, UPS_Device]: input.frequency is not supported by server. [108] 13/03/2024 14:24:30 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [109] 13/03/2024 14:24:30 [57840, UPS_Device]: output.voltage is not supported by server. [110] 13/03/2024 14:24:30 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [111] 13/03/2024 14:24:30 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [112] 13/03/2024 14:24:30 [57840, WinNUT]: Updating UPS data for Form. [113] 13/03/2024 14:24:30 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [114] 13/03/2024 14:24:30 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [115] 13/03/2024 14:24:30 [57840, WinNUT]: Update Dial [116] 13/03/2024 14:24:30 [57840, WinNUT]: Update Icon [117] 13/03/2024 14:24:30 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [118] 13/03/2024 14:24:30 [57840, WinNUT]: Battery Status => Discharging [119] 13/03/2024 14:24:31 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [120] 13/03/2024 14:24:31 [57840, UPS_Device]: output.frequency is not supported by server. [121] 13/03/2024 14:24:31 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [122] 13/03/2024 14:24:31 [57840, UPS_Device]: input.frequency is not supported by server. [123] 13/03/2024 14:24:31 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [124] 13/03/2024 14:24:31 [57840, UPS_Device]: output.voltage is not supported by server. [125] 13/03/2024 14:24:31 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [126] 13/03/2024 14:24:31 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [127] 13/03/2024 14:24:31 [57840, WinNUT]: Updating UPS data for Form. [128] 13/03/2024 14:24:31 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [129] 13/03/2024 14:24:31 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [130] 13/03/2024 14:24:31 [57840, WinNUT]: Update Dial [131] 13/03/2024 14:24:31 [57840, WinNUT]: Update Icon [132] 13/03/2024 14:24:31 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [133] 13/03/2024 14:24:31 [57840, WinNUT]: Battery Status => Discharging [134] 13/03/2024 14:24:32 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [135] 13/03/2024 14:24:32 [57840, UPS_Device]: output.frequency is not supported by server. [136] 13/03/2024 14:24:32 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [137] 13/03/2024 14:24:32 [57840, UPS_Device]: input.frequency is not supported by server. [138] 13/03/2024 14:24:32 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [139] 13/03/2024 14:24:32 [57840, UPS_Device]: output.voltage is not supported by server. [140] 13/03/2024 14:24:32 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [141] 13/03/2024 14:24:32 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [142] 13/03/2024 14:24:32 [57840, WinNUT]: Updating UPS data for Form. [143] 13/03/2024 14:24:32 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [144] 13/03/2024 14:24:32 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [145] 13/03/2024 14:24:32 [57840, WinNUT]: Update Dial [146] 13/03/2024 14:24:32 [57840, WinNUT]: Update Icon [147] 13/03/2024 14:24:32 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [148] 13/03/2024 14:24:32 [57840, WinNUT]: Battery Status => Discharging [149] 13/03/2024 14:24:33 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [150] 13/03/2024 14:24:33 [57840, UPS_Device]: output.frequency is not supported by server. [151] 13/03/2024 14:24:33 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [152] 13/03/2024 14:24:33 [57840, UPS_Device]: input.frequency is not supported by server. [153] 13/03/2024 14:24:33 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [154] 13/03/2024 14:24:33 [57840, UPS_Device]: output.voltage is not supported by server. [155] 13/03/2024 14:24:33 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [156] 13/03/2024 14:24:33 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [157] 13/03/2024 14:24:33 [57840, WinNUT]: Updating UPS data for Form. [158] 13/03/2024 14:24:33 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [159] 13/03/2024 14:24:33 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [160] 13/03/2024 14:24:33 [57840, WinNUT]: Update Dial [161] 13/03/2024 14:24:33 [57840, WinNUT]: Update Icon [162] 13/03/2024 14:24:33 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [163] 13/03/2024 14:24:33 [57840, WinNUT]: Battery Status => Discharging [164] 13/03/2024 14:24:34 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [165] 13/03/2024 14:24:34 [57840, UPS_Device]: output.frequency is not supported by server. [166] 13/03/2024 14:24:34 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [167] 13/03/2024 14:24:34 [57840, UPS_Device]: input.frequency is not supported by server. [168] 13/03/2024 14:24:34 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [169] 13/03/2024 14:24:34 [57840, UPS_Device]: output.voltage is not supported by server. [170] 13/03/2024 14:24:34 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [171] 13/03/2024 14:24:34 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [172] 13/03/2024 14:24:34 [57840, WinNUT]: Updating UPS data for Form. [173] 13/03/2024 14:24:34 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [174] 13/03/2024 14:24:34 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [175] 13/03/2024 14:24:34 [57840, WinNUT]: Update Dial [176] 13/03/2024 14:24:34 [57840, WinNUT]: Update Icon [177] 13/03/2024 14:24:34 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [178] 13/03/2024 14:24:34 [57840, WinNUT]: Battery Status => Discharging [179] 13/03/2024 14:24:34 [57840, Pref_Gui]: Setting LogControl statuses. [180] 13/03/2024 14:24:35 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [181] 13/03/2024 14:24:35 [57840, UPS_Device]: output.frequency is not supported by server. [182] 13/03/2024 14:24:35 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [183] 13/03/2024 14:24:35 [57840, UPS_Device]: input.frequency is not supported by server. [184] 13/03/2024 14:24:35 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [185] 13/03/2024 14:24:35 [57840, UPS_Device]: output.voltage is not supported by server. [186] 13/03/2024 14:24:35 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [187] 13/03/2024 14:24:35 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [188] 13/03/2024 14:24:35 [57840, WinNUT]: Updating UPS data for Form. [189] 13/03/2024 14:24:35 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [190] 13/03/2024 14:24:35 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [191] 13/03/2024 14:24:35 [57840, WinNUT]: Update Dial [192] 13/03/2024 14:24:35 [57840, WinNUT]: Update Icon [193] 13/03/2024 14:24:35 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [194] 13/03/2024 14:24:35 [57840, WinNUT]: Battery Status => Discharging [195] 13/03/2024 14:24:35 [57840, Pref_Gui]: Save Parameters. [196] 13/03/2024 14:24:35 [57840, Pref_Gui]: WinNUT Added to Startup. [197] 13/03/2024 14:24:35 [57840, Pref_Gui]: Pref_Gui Params Saved [198] 13/03/2024 14:24:35 [57840, Pref_Gui]: Setting LogControl statuses. [199] 13/03/2024 14:24:35 [57840, WinNUT]: Beginning WinNUT_PrefsChanged subroutine. [200] 13/03/2024 14:24:35 [57840, Logger]: WinNUT Client 2.3.8834.24333 Log file init ==== Begin Live Log ==== 13/03/2024 14:24:36 [57840, WinNUT]: Connection parameters Changed. Force Reconnect 13/03/2024 14:24:36 [57840, WinNUT]: Running Client disconnect subroutine. 13/03/2024 14:24:36 [57840, UPS_Device]: Processing request to disconnect... 13/03/2024 14:24:36 [57840, WinNUT]: Update all informations displayed to empty values 13/03/2024 14:24:36 [57840, WinNUT]: Update Icon 13/03/2024 14:24:36 [57840, WinNUT]: Status Icon Changed 13/03/2024 14:24:36 [57840, WinNUT]: New Icon Value For Systray : 1216 13/03/2024 14:24:36 [57840, WinNUT]: New Icon Value For Gui : 1216 13/03/2024 14:24:36 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Not Connected 13/03/2024 14:24:36 [57840, WinNUT]: Battery Status => Unknown 13/03/2024 14:24:36 [57840, WinNUT]: Disconnected from Nut Host 13/03/2024 14:24:36 [57840, String]: New Log to CB_Current Log : Disconnected from Nut Host 13/03/2024 14:24:36 [57840, WinNUT]: Client UPS_Connect subroutine beginning. 13/03/2024 14:24:36 [57840, UPS_Device]: Beginning connection: [email protected]:3493, Name: ups [AutoReconnect] 13/03/2024 14:24:36 [57840, Nut_Socket]: Attempting TCP socket connection to 192.168.10.1:3493... 13/03/2024 14:24:36 [57840, Nut_Socket]: Connection established and streams ready for 192.168.10.1:3493 13/03/2024 14:24:36 [57840, Nut_Socket]: Attempting authentication... 13/03/2024 14:24:36 [57840, Nut_Socket]: Error while attempting to log in: INVALIDARGUMENT (ERR INVALID-ARGUMENT) Query: USERNAME I9PUzKl3aLU= 13/03/2024 14:24:36 [57840, Nut_Socket]: NUT server reports VER: DSM6-2-25510-201118 NETVER: 1.2 13/03/2024 14:24:36 [57840, UPS_Device]: Retrieving basic UPS product information... 13/03/2024 14:24:36 [57840, UPS_Device]: ups.firmware is not supported by server. 13/03/2024 14:24:36 [57840, UPS_Device]: Apply Fallback Value when retrieving ups.firmware 13/03/2024 14:24:36 [57840, UPS_Device]: Determining best method to calculate power usage... 13/03/2024 14:24:36 [57840, UPS_Device]: ups.realpower is not supported by server. 13/03/2024 14:24:36 [57840, UPS_Device]: Unhandled error while getting ups.realpower 13/03/2024 14:24:36 [57840, UPS_Device]: Using NominalPowerCalc method to calculate power usage. 13/03/2024 14:24:36 [57840, UPS_Device]: battery.capacity is not supported by server. 13/03/2024 14:24:36 [57840, UPS_Device]: Apply Fallback Value when retrieving battery.capacity 13/03/2024 14:24:36 [57840, UPS_Device]: output.frequency.nominal is not supported by server. 13/03/2024 14:24:36 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency.nominal 13/03/2024 14:24:36 [57840, UPS_Device]: Completed retrieval of basic UPS product information. 13/03/2024 14:24:36 [57840, WinNUT]: ups has indicated it's ready to start sending data. 13/03/2024 14:24:36 [57840, WinNUT]: Update Icon 13/03/2024 14:24:36 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected 13/03/2024 14:24:36 [57840, WinNUT]: Connection to Nut Host Established 13/03/2024 14:24:36 [57840, String]: New Log to CB_Current Log : Connection to Nut Host 192.168.10.1:3493 Established 13/03/2024 14:24:36 [57840, WinNUT]: WinNut Preferences Applied. 13/03/2024 14:24:36 [57840, String]: New Log to CB_Current Log : WinNut Preferences Changed 13/03/2024 14:24:37 [57840, UPS_Device]: Enter Retrieve_UPS_Datas 13/03/2024 14:24:37 [57840, UPS_Device]: output.frequency is not supported by server. 13/03/2024 14:24:37 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency 13/03/2024 14:24:37 [57840, UPS_Device]: input.frequency is not supported by server. 13/03/2024 14:24:37 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency 13/03/2024 14:24:37 [57840, UPS_Device]: output.voltage is not supported by server. 13/03/2024 14:24:37 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage 13/03/2024 14:24:37 [57840, UPS_Device]: UPS statuses have CHANGED... 13/03/2024 14:24:37 [57840, UPS_Device]: Current statuses: OL,CHRG 13/03/2024 14:24:37 [57840, WinNUT]: Handling new UPS status(es)... 13/03/2024 14:24:37 [57840, WinNUT]: Updating UPS data for Form. 13/03/2024 14:24:37 [57840, WinNUT]: Updating battery icons based on charge percent: 97% 13/03/2024 14:24:37 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 13/03/2024 14:24:37 [57840, WinNUT]: Update Dial 13/03/2024 14:24:37 [57840, WinNUT]: Update Icon 13/03/2024 14:24:37 [57840, WinNUT]: Status Icon Changed 13/03/2024 14:24:37 [57840, WinNUT]: New Icon Value For Systray : 1136 13/03/2024 14:24:37 [57840, WinNUT]: New Icon Value For Gui : 1136 13/03/2024 14:24:37 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK 13/03/2024 14:24:37 [57840, WinNUT]: Battery Status => Discharging 13/03/2024 14:24:38 [57840, UPS_Device]: Enter Retrieve_UPS_Datas 13/03/2024 14:24:38 [57840, UPS_Device]: output.frequency is not supported by server. 13/03/2024 14:24:38 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency 13/03/2024 14:24:38 [57840, UPS_Device]: input.frequency is not supported by server. 13/03/2024 14:24:38 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency 13/03/2024 14:24:38 [57840, UPS_Device]: output.voltage is not supported by server. 13/03/2024 14:24:38 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage 13/03/2024 14:24:38 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. 13/03/2024 14:24:38 [57840, WinNUT]: Updating UPS data for Form. 13/03/2024 14:24:38 [57840, WinNUT]: Updating battery icons based on charge percent: 97% 13/03/2024 14:24:38 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 13/03/2024 14:24:38 [57840, WinNUT]: Update Dial 13/03/2024 14:24:38 [57840, WinNUT]: Update Icon 13/03/2024 14:24:38 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK 13/03/2024 14:24:38 [57840, WinNUT]: Battery Status => Discharging 13/03/2024 14:24:39 [57840, Pref_Gui]: Save Parameters. 13/03/2024 14:24:39 [57840, Pref_Gui]: Pref_Gui Params Saved 13/03/2024 14:24:39 [57840, Pref_Gui]: Setting LogControl statuses. 13/03/2024 14:24:39 [57840, WinNUT]: Beginning WinNUT_PrefsChanged subroutine. 13/03/2024 14:24:39 [57840, Logger]: WinNUT Client 2.3.8834.24333 Log file init ==== History of 200 previous events ==== [1] 13/03/2024 14:24:28 [57840, UPS_Device]: output.voltage is not supported by server. [2] 13/03/2024 14:24:28 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [3] 13/03/2024 14:24:28 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [4] 13/03/2024 14:24:28 [57840, WinNUT]: Updating UPS data for Form. [5] 13/03/2024 14:24:28 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [6] 13/03/2024 14:24:28 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [7] 13/03/2024 14:24:28 [57840, WinNUT]: Update Dial [8] 13/03/2024 14:24:28 [57840, WinNUT]: Update Icon [9] 13/03/2024 14:24:28 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [10] 13/03/2024 14:24:28 [57840, WinNUT]: Battery Status => Discharging [11] 13/03/2024 14:24:29 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [12] 13/03/2024 14:24:29 [57840, UPS_Device]: output.frequency is not supported by server. [13] 13/03/2024 14:24:29 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [14] 13/03/2024 14:24:29 [57840, UPS_Device]: input.frequency is not supported by server. [15] 13/03/2024 14:24:29 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [16] 13/03/2024 14:24:29 [57840, UPS_Device]: output.voltage is not supported by server. [17] 13/03/2024 14:24:29 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [18] 13/03/2024 14:24:29 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [19] 13/03/2024 14:24:29 [57840, WinNUT]: Updating UPS data for Form. [20] 13/03/2024 14:24:29 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [21] 13/03/2024 14:24:29 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [22] 13/03/2024 14:24:29 [57840, WinNUT]: Update Dial [23] 13/03/2024 14:24:29 [57840, WinNUT]: Update Icon [24] 13/03/2024 14:24:29 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [25] 13/03/2024 14:24:29 [57840, WinNUT]: Battery Status => Discharging [26] 13/03/2024 14:24:30 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [27] 13/03/2024 14:24:30 [57840, UPS_Device]: output.frequency is not supported by server. [28] 13/03/2024 14:24:30 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [29] 13/03/2024 14:24:30 [57840, UPS_Device]: input.frequency is not supported by server. [30] 13/03/2024 14:24:30 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [31] 13/03/2024 14:24:30 [57840, UPS_Device]: output.voltage is not supported by server. [32] 13/03/2024 14:24:30 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [33] 13/03/2024 14:24:30 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [34] 13/03/2024 14:24:30 [57840, WinNUT]: Updating UPS data for Form. [35] 13/03/2024 14:24:30 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [36] 13/03/2024 14:24:30 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [37] 13/03/2024 14:24:30 [57840, WinNUT]: Update Dial [38] 13/03/2024 14:24:30 [57840, WinNUT]: Update Icon [39] 13/03/2024 14:24:30 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [40] 13/03/2024 14:24:30 [57840, WinNUT]: Battery Status => Discharging [41] 13/03/2024 14:24:31 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [42] 13/03/2024 14:24:31 [57840, UPS_Device]: output.frequency is not supported by server. [43] 13/03/2024 14:24:31 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [44] 13/03/2024 14:24:31 [57840, UPS_Device]: input.frequency is not supported by server. [45] 13/03/2024 14:24:31 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [46] 13/03/2024 14:24:31 [57840, UPS_Device]: output.voltage is not supported by server. [47] 13/03/2024 14:24:31 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [48] 13/03/2024 14:24:31 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [49] 13/03/2024 14:24:31 [57840, WinNUT]: Updating UPS data for Form. [50] 13/03/2024 14:24:31 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [51] 13/03/2024 14:24:31 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [52] 13/03/2024 14:24:31 [57840, WinNUT]: Update Dial [53] 13/03/2024 14:24:31 [57840, WinNUT]: Update Icon [54] 13/03/2024 14:24:31 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [55] 13/03/2024 14:24:31 [57840, WinNUT]: Battery Status => Discharging [56] 13/03/2024 14:24:32 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [57] 13/03/2024 14:24:32 [57840, UPS_Device]: output.frequency is not supported by server. [58] 13/03/2024 14:24:32 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [59] 13/03/2024 14:24:32 [57840, UPS_Device]: input.frequency is not supported by server. [60] 13/03/2024 14:24:32 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [61] 13/03/2024 14:24:32 [57840, UPS_Device]: output.voltage is not supported by server. [62] 13/03/2024 14:24:32 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [63] 13/03/2024 14:24:32 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [64] 13/03/2024 14:24:32 [57840, WinNUT]: Updating UPS data for Form. [65] 13/03/2024 14:24:32 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [66] 13/03/2024 14:24:32 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [67] 13/03/2024 14:24:32 [57840, WinNUT]: Update Dial [68] 13/03/2024 14:24:32 [57840, WinNUT]: Update Icon [69] 13/03/2024 14:24:32 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [70] 13/03/2024 14:24:32 [57840, WinNUT]: Battery Status => Discharging [71] 13/03/2024 14:24:33 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [72] 13/03/2024 14:24:33 [57840, UPS_Device]: output.frequency is not supported by server. [73] 13/03/2024 14:24:33 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [74] 13/03/2024 14:24:33 [57840, UPS_Device]: input.frequency is not supported by server. [75] 13/03/2024 14:24:33 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [76] 13/03/2024 14:24:33 [57840, UPS_Device]: output.voltage is not supported by server. [77] 13/03/2024 14:24:33 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [78] 13/03/2024 14:24:33 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [79] 13/03/2024 14:24:33 [57840, WinNUT]: Updating UPS data for Form. [80] 13/03/2024 14:24:33 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [81] 13/03/2024 14:24:33 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [82] 13/03/2024 14:24:33 [57840, WinNUT]: Update Dial [83] 13/03/2024 14:24:33 [57840, WinNUT]: Update Icon [84] 13/03/2024 14:24:33 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [85] 13/03/2024 14:24:33 [57840, WinNUT]: Battery Status => Discharging [86] 13/03/2024 14:24:34 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [87] 13/03/2024 14:24:34 [57840, UPS_Device]: output.frequency is not supported by server. [88] 13/03/2024 14:24:34 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [89] 13/03/2024 14:24:34 [57840, UPS_Device]: input.frequency is not supported by server. [90] 13/03/2024 14:24:34 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [91] 13/03/2024 14:24:34 [57840, UPS_Device]: output.voltage is not supported by server. [92] 13/03/2024 14:24:34 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [93] 13/03/2024 14:24:34 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [94] 13/03/2024 14:24:34 [57840, WinNUT]: Updating UPS data for Form. [95] 13/03/2024 14:24:34 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [96] 13/03/2024 14:24:34 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [97] 13/03/2024 14:24:34 [57840, WinNUT]: Update Dial [98] 13/03/2024 14:24:34 [57840, WinNUT]: Update Icon [99] 13/03/2024 14:24:34 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [100] 13/03/2024 14:24:34 [57840, WinNUT]: Battery Status => Discharging [101] 13/03/2024 14:24:34 [57840, Pref_Gui]: Setting LogControl statuses. [102] 13/03/2024 14:24:35 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [103] 13/03/2024 14:24:35 [57840, UPS_Device]: output.frequency is not supported by server. [104] 13/03/2024 14:24:35 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [105] 13/03/2024 14:24:35 [57840, UPS_Device]: input.frequency is not supported by server. [106] 13/03/2024 14:24:35 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [107] 13/03/2024 14:24:35 [57840, UPS_Device]: output.voltage is not supported by server. [108] 13/03/2024 14:24:35 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [109] 13/03/2024 14:24:35 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [110] 13/03/2024 14:24:35 [57840, WinNUT]: Updating UPS data for Form. [111] 13/03/2024 14:24:35 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [112] 13/03/2024 14:24:35 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [113] 13/03/2024 14:24:35 [57840, WinNUT]: Update Dial [114] 13/03/2024 14:24:35 [57840, WinNUT]: Update Icon [115] 13/03/2024 14:24:35 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [116] 13/03/2024 14:24:35 [57840, WinNUT]: Battery Status => Discharging [117] 13/03/2024 14:24:35 [57840, Pref_Gui]: Save Parameters. [118] 13/03/2024 14:24:35 [57840, Pref_Gui]: WinNUT Added to Startup. [119] 13/03/2024 14:24:35 [57840, Pref_Gui]: Pref_Gui Params Saved [120] 13/03/2024 14:24:35 [57840, Pref_Gui]: Setting LogControl statuses. [121] 13/03/2024 14:24:35 [57840, WinNUT]: Beginning WinNUT_PrefsChanged subroutine. [122] 13/03/2024 14:24:35 [57840, Logger]: WinNUT Client 2.3.8834.24333 Log file init [123] 13/03/2024 14:24:36 [57840, WinNUT]: Connection parameters Changed. Force Reconnect [124] 13/03/2024 14:24:36 [57840, WinNUT]: Running Client disconnect subroutine. [125] 13/03/2024 14:24:36 [57840, UPS_Device]: Processing request to disconnect... [126] 13/03/2024 14:24:36 [57840, WinNUT]: Update all informations displayed to empty values [127] 13/03/2024 14:24:36 [57840, WinNUT]: Update Icon [128] 13/03/2024 14:24:36 [57840, WinNUT]: Status Icon Changed [129] 13/03/2024 14:24:36 [57840, WinNUT]: New Icon Value For Systray : 1216 [130] 13/03/2024 14:24:36 [57840, WinNUT]: New Icon Value For Gui : 1216 [131] 13/03/2024 14:24:36 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Not Connected [132] 13/03/2024 14:24:36 [57840, WinNUT]: Battery Status => Unknown [133] 13/03/2024 14:24:36 [57840, WinNUT]: Disconnected from Nut Host [134] 13/03/2024 14:24:36 [57840, String]: New Log to CB_Current Log : Disconnected from Nut Host [135] 13/03/2024 14:24:36 [57840, WinNUT]: Client UPS_Connect subroutine beginning. [136] 13/03/2024 14:24:36 [57840, UPS_Device]: Beginning connection: [email protected]:3493, Name: ups [AutoReconnect] [137] 13/03/2024 14:24:36 [57840, Nut_Socket]: Attempting TCP socket connection to 192.168.10.1:3493... [138] 13/03/2024 14:24:36 [57840, Nut_Socket]: Connection established and streams ready for 192.168.10.1:3493 [139] 13/03/2024 14:24:36 [57840, Nut_Socket]: Attempting authentication... [140] 13/03/2024 14:24:36 [57840, Nut_Socket]: Error while attempting to log in: INVALIDARGUMENT (ERR INVALID-ARGUMENT) Query: USERNAME I9PUzKl3aLU= [141] 13/03/2024 14:24:36 [57840, Nut_Socket]: NUT server reports VER: DSM6-2-25510-201118 NETVER: 1.2 [142] 13/03/2024 14:24:36 [57840, UPS_Device]: Retrieving basic UPS product information... [143] 13/03/2024 14:24:36 [57840, UPS_Device]: ups.firmware is not supported by server. [144] 13/03/2024 14:24:36 [57840, UPS_Device]: Apply Fallback Value when retrieving ups.firmware [145] 13/03/2024 14:24:36 [57840, UPS_Device]: Determining best method to calculate power usage... [146] 13/03/2024 14:24:36 [57840, UPS_Device]: ups.realpower is not supported by server. [147] 13/03/2024 14:24:36 [57840, UPS_Device]: Unhandled error while getting ups.realpower [148] 13/03/2024 14:24:36 [57840, UPS_Device]: Using NominalPowerCalc method to calculate power usage. [149] 13/03/2024 14:24:36 [57840, UPS_Device]: battery.capacity is not supported by server. [150] 13/03/2024 14:24:36 [57840, UPS_Device]: Apply Fallback Value when retrieving battery.capacity [151] 13/03/2024 14:24:36 [57840, UPS_Device]: output.frequency.nominal is not supported by server. [152] 13/03/2024 14:24:36 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency.nominal [153] 13/03/2024 14:24:36 [57840, UPS_Device]: Completed retrieval of basic UPS product information. [154] 13/03/2024 14:24:36 [57840, WinNUT]: ups has indicated it's ready to start sending data. [155] 13/03/2024 14:24:36 [57840, WinNUT]: Update Icon [156] 13/03/2024 14:24:36 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected [157] 13/03/2024 14:24:36 [57840, WinNUT]: Connection to Nut Host Established [158] 13/03/2024 14:24:36 [57840, String]: New Log to CB_Current Log : Connection to Nut Host 192.168.10.1:3493 Established [159] 13/03/2024 14:24:36 [57840, WinNUT]: WinNut Preferences Applied. [160] 13/03/2024 14:24:36 [57840, String]: New Log to CB_Current Log : WinNut Preferences Changed [161] 13/03/2024 14:24:37 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [162] 13/03/2024 14:24:37 [57840, UPS_Device]: output.frequency is not supported by server. [163] 13/03/2024 14:24:37 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [164] 13/03/2024 14:24:37 [57840, UPS_Device]: input.frequency is not supported by server. [165] 13/03/2024 14:24:37 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [166] 13/03/2024 14:24:37 [57840, UPS_Device]: output.voltage is not supported by server. [167] 13/03/2024 14:24:37 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [168] 13/03/2024 14:24:37 [57840, UPS_Device]: UPS statuses have CHANGED... [169] 13/03/2024 14:24:37 [57840, UPS_Device]: Current statuses: OL,CHRG [170] 13/03/2024 14:24:37 [57840, WinNUT]: Handling new UPS status(es)... [171] 13/03/2024 14:24:37 [57840, WinNUT]: Updating UPS data for Form. [172] 13/03/2024 14:24:37 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [173] 13/03/2024 14:24:37 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [174] 13/03/2024 14:24:37 [57840, WinNUT]: Update Dial [175] 13/03/2024 14:24:37 [57840, WinNUT]: Update Icon [176] 13/03/2024 14:24:37 [57840, WinNUT]: Status Icon Changed [177] 13/03/2024 14:24:37 [57840, WinNUT]: New Icon Value For Systray : 1136 [178] 13/03/2024 14:24:37 [57840, WinNUT]: New Icon Value For Gui : 1136 [179] 13/03/2024 14:24:37 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [180] 13/03/2024 14:24:37 [57840, WinNUT]: Battery Status => Discharging [181] 13/03/2024 14:24:38 [57840, UPS_Device]: Enter Retrieve_UPS_Datas [182] 13/03/2024 14:24:38 [57840, UPS_Device]: output.frequency is not supported by server. [183] 13/03/2024 14:24:38 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency [184] 13/03/2024 14:24:38 [57840, UPS_Device]: input.frequency is not supported by server. [185] 13/03/2024 14:24:38 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency [186] 13/03/2024 14:24:38 [57840, UPS_Device]: output.voltage is not supported by server. [187] 13/03/2024 14:24:38 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage [188] 13/03/2024 14:24:38 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. [189] 13/03/2024 14:24:38 [57840, WinNUT]: Updating UPS data for Form. [190] 13/03/2024 14:24:38 [57840, WinNUT]: Updating battery icons based on charge percent: 97% [191] 13/03/2024 14:24:38 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 [192] 13/03/2024 14:24:38 [57840, WinNUT]: Update Dial [193] 13/03/2024 14:24:38 [57840, WinNUT]: Update Icon [194] 13/03/2024 14:24:38 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK [195] 13/03/2024 14:24:38 [57840, WinNUT]: Battery Status => Discharging [196] 13/03/2024 14:24:39 [57840, Pref_Gui]: Save Parameters. [197] 13/03/2024 14:24:39 [57840, Pref_Gui]: Pref_Gui Params Saved [198] 13/03/2024 14:24:39 [57840, Pref_Gui]: Setting LogControl statuses. [199] 13/03/2024 14:24:39 [57840, WinNUT]: Beginning WinNUT_PrefsChanged subroutine. [200] 13/03/2024 14:24:39 [57840, Logger]: WinNUT Client 2.3.8834.24333 Log file init ==== Begin Live Log ==== 13/03/2024 14:24:39 [57840, WinNUT]: Connection parameters Changed. Force Reconnect 13/03/2024 14:24:39 [57840, WinNUT]: Running Client disconnect subroutine. 13/03/2024 14:24:39 [57840, UPS_Device]: Processing request to disconnect... 13/03/2024 14:24:39 [57840, WinNUT]: Update all informations displayed to empty values 13/03/2024 14:24:39 [57840, WinNUT]: Update Icon 13/03/2024 14:24:39 [57840, WinNUT]: Status Icon Changed 13/03/2024 14:24:39 [57840, WinNUT]: New Icon Value For Systray : 1216 13/03/2024 14:24:39 [57840, WinNUT]: New Icon Value For Gui : 1216 13/03/2024 14:24:39 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Not Connected 13/03/2024 14:24:39 [57840, WinNUT]: Battery Status => Unknown 13/03/2024 14:24:39 [57840, WinNUT]: Disconnected from Nut Host 13/03/2024 14:24:39 [57840, String]: New Log to CB_Current Log : Disconnected from Nut Host 13/03/2024 14:24:39 [57840, WinNUT]: Client UPS_Connect subroutine beginning. 13/03/2024 14:24:39 [57840, UPS_Device]: Beginning connection: [email protected]:3493, Name: ups [AutoReconnect] 13/03/2024 14:24:39 [57840, Nut_Socket]: Attempting TCP socket connection to 192.168.10.1:3493... 13/03/2024 14:24:39 [57840, Nut_Socket]: Connection established and streams ready for 192.168.10.1:3493 13/03/2024 14:24:39 [57840, Nut_Socket]: Attempting authentication... 13/03/2024 14:24:39 [57840, Nut_Socket]: Error while attempting to log in: INVALIDARGUMENT (ERR INVALID-ARGUMENT) Query: USERNAME I9PUzKl3aLU= 13/03/2024 14:24:39 [57840, Nut_Socket]: NUT server reports VER: DSM6-2-25510-201118 NETVER: 1.2 13/03/2024 14:24:39 [57840, UPS_Device]: Retrieving basic UPS product information... 13/03/2024 14:24:39 [57840, UPS_Device]: ups.firmware is not supported by server. 13/03/2024 14:24:39 [57840, UPS_Device]: Apply Fallback Value when retrieving ups.firmware 13/03/2024 14:24:39 [57840, UPS_Device]: Determining best method to calculate power usage... 13/03/2024 14:24:39 [57840, UPS_Device]: ups.realpower is not supported by server. 13/03/2024 14:24:39 [57840, UPS_Device]: Unhandled error while getting ups.realpower 13/03/2024 14:24:39 [57840, UPS_Device]: Using NominalPowerCalc method to calculate power usage. 13/03/2024 14:24:39 [57840, UPS_Device]: battery.capacity is not supported by server. 13/03/2024 14:24:39 [57840, UPS_Device]: Apply Fallback Value when retrieving battery.capacity 13/03/2024 14:24:39 [57840, UPS_Device]: output.frequency.nominal is not supported by server. 13/03/2024 14:24:39 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency.nominal 13/03/2024 14:24:39 [57840, UPS_Device]: Completed retrieval of basic UPS product information. 13/03/2024 14:24:39 [57840, WinNUT]: ups has indicated it's ready to start sending data. 13/03/2024 14:24:39 [57840, WinNUT]: Update Icon 13/03/2024 14:24:39 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected 13/03/2024 14:24:39 [57840, WinNUT]: Connection to Nut Host Established 13/03/2024 14:24:39 [57840, String]: New Log to CB_Current Log : Connection to Nut Host 192.168.10.1:3493 Established 13/03/2024 14:24:39 [57840, WinNUT]: WinNut Preferences Applied. 13/03/2024 14:24:39 [57840, String]: New Log to CB_Current Log : WinNut Preferences Changed 13/03/2024 14:24:39 [57840, WinNUT]: Main GUI activated. 13/03/2024 14:24:39 [57840, WinNUT]: Update Icon 13/03/2024 14:24:40 [57840, UPS_Device]: Enter Retrieve_UPS_Datas 13/03/2024 14:24:40 [57840, UPS_Device]: output.frequency is not supported by server. 13/03/2024 14:24:40 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency 13/03/2024 14:24:40 [57840, UPS_Device]: input.frequency is not supported by server. 13/03/2024 14:24:40 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency 13/03/2024 14:24:40 [57840, UPS_Device]: output.voltage is not supported by server. 13/03/2024 14:24:40 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage 13/03/2024 14:24:40 [57840, UPS_Device]: UPS statuses have CHANGED... 13/03/2024 14:24:40 [57840, UPS_Device]: Current statuses: OL,CHRG 13/03/2024 14:24:40 [57840, WinNUT]: Handling new UPS status(es)... 13/03/2024 14:24:40 [57840, WinNUT]: Updating UPS data for Form. 13/03/2024 14:24:40 [57840, WinNUT]: Updating battery icons based on charge percent: 97% 13/03/2024 14:24:40 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 13/03/2024 14:24:40 [57840, WinNUT]: Update Dial 13/03/2024 14:24:40 [57840, WinNUT]: Update Icon 13/03/2024 14:24:40 [57840, WinNUT]: Status Icon Changed 13/03/2024 14:24:40 [57840, WinNUT]: New Icon Value For Systray : 1136 13/03/2024 14:24:40 [57840, WinNUT]: New Icon Value For Gui : 1072 13/03/2024 14:24:40 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK 13/03/2024 14:24:40 [57840, WinNUT]: Battery Status => Discharging 13/03/2024 14:24:41 [57840, UPS_Device]: Enter Retrieve_UPS_Datas 13/03/2024 14:24:41 [57840, UPS_Device]: output.frequency is not supported by server. 13/03/2024 14:24:41 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency 13/03/2024 14:24:41 [57840, UPS_Device]: input.frequency is not supported by server. 13/03/2024 14:24:41 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency 13/03/2024 14:24:41 [57840, UPS_Device]: output.voltage is not supported by server. 13/03/2024 14:24:41 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage 13/03/2024 14:24:41 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. 13/03/2024 14:24:41 [57840, WinNUT]: Updating UPS data for Form. 13/03/2024 14:24:41 [57840, WinNUT]: Updating battery icons based on charge percent: 97% 13/03/2024 14:24:41 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 13/03/2024 14:24:41 [57840, WinNUT]: Update Dial 13/03/2024 14:24:41 [57840, WinNUT]: Update Icon 13/03/2024 14:24:41 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK 13/03/2024 14:24:41 [57840, WinNUT]: Battery Status => Discharging 13/03/2024 14:24:42 [57840, WinNUT]: Open Pref Gui From Menu 13/03/2024 14:24:42 [57840, Pref_Gui]: Load Pref Gui 13/03/2024 14:24:42 [57840, WinNUT]: Main Gui Lose Focus 13/03/2024 14:24:42 [57840, WinNUT]: Update Icon 13/03/2024 14:24:42 [57840, Pref_Gui]: Pref Gui Opened. 13/03/2024 14:24:42 [57840, UPS_Device]: Enter Retrieve_UPS_Datas 13/03/2024 14:24:42 [57840, UPS_Device]: output.frequency is not supported by server. 13/03/2024 14:24:42 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency 13/03/2024 14:24:42 [57840, UPS_Device]: input.frequency is not supported by server. 13/03/2024 14:24:42 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency 13/03/2024 14:24:42 [57840, UPS_Device]: output.voltage is not supported by server. 13/03/2024 14:24:42 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage 13/03/2024 14:24:42 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. 13/03/2024 14:24:42 [57840, WinNUT]: Updating UPS data for Form. 13/03/2024 14:24:42 [57840, WinNUT]: Updating battery icons based on charge percent: 97% 13/03/2024 14:24:42 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 13/03/2024 14:24:42 [57840, WinNUT]: Update Dial 13/03/2024 14:24:42 [57840, WinNUT]: Update Icon 13/03/2024 14:24:42 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK 13/03/2024 14:24:42 [57840, WinNUT]: Battery Status => Discharging 13/03/2024 14:24:43 [57840, UPS_Device]: Enter Retrieve_UPS_Datas 13/03/2024 14:24:43 [57840, UPS_Device]: output.frequency is not supported by server. 13/03/2024 14:24:43 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency 13/03/2024 14:24:43 [57840, UPS_Device]: input.frequency is not supported by server. 13/03/2024 14:24:43 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency 13/03/2024 14:24:43 [57840, UPS_Device]: output.voltage is not supported by server. 13/03/2024 14:24:43 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage 13/03/2024 14:24:43 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. 13/03/2024 14:24:43 [57840, WinNUT]: Updating UPS data for Form. 13/03/2024 14:24:43 [57840, WinNUT]: Updating battery icons based on charge percent: 97% 13/03/2024 14:24:43 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 13/03/2024 14:24:43 [57840, WinNUT]: Update Dial 13/03/2024 14:24:43 [57840, WinNUT]: Update Icon 13/03/2024 14:24:43 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK 13/03/2024 14:24:43 [57840, WinNUT]: Battery Status => Discharging 13/03/2024 14:24:44 [57840, UPS_Device]: Enter Retrieve_UPS_Datas 13/03/2024 14:24:44 [57840, UPS_Device]: output.frequency is not supported by server. 13/03/2024 14:24:44 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency 13/03/2024 14:24:44 [57840, UPS_Device]: input.frequency is not supported by server. 13/03/2024 14:24:44 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency 13/03/2024 14:24:44 [57840, UPS_Device]: output.voltage is not supported by server. 13/03/2024 14:24:44 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage 13/03/2024 14:24:44 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. 13/03/2024 14:24:44 [57840, WinNUT]: Updating UPS data for Form. 13/03/2024 14:24:44 [57840, WinNUT]: Updating battery icons based on charge percent: 97% 13/03/2024 14:24:44 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 13/03/2024 14:24:44 [57840, WinNUT]: Update Dial 13/03/2024 14:24:44 [57840, WinNUT]: Update Icon 13/03/2024 14:24:44 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK 13/03/2024 14:24:44 [57840, WinNUT]: Battery Status => Discharging 13/03/2024 14:24:45 [57840, UPS_Device]: Enter Retrieve_UPS_Datas 13/03/2024 14:24:45 [57840, UPS_Device]: output.frequency is not supported by server. 13/03/2024 14:24:45 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency 13/03/2024 14:24:45 [57840, UPS_Device]: input.frequency is not supported by server. 13/03/2024 14:24:45 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency 13/03/2024 14:24:45 [57840, UPS_Device]: output.voltage is not supported by server. 13/03/2024 14:24:45 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage 13/03/2024 14:24:45 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. 13/03/2024 14:24:45 [57840, WinNUT]: Updating UPS data for Form. 13/03/2024 14:24:45 [57840, WinNUT]: Updating battery icons based on charge percent: 97% 13/03/2024 14:24:45 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 13/03/2024 14:24:45 [57840, WinNUT]: Update Dial 13/03/2024 14:24:45 [57840, WinNUT]: Update Icon 13/03/2024 14:24:45 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK 13/03/2024 14:24:45 [57840, WinNUT]: Battery Status => Discharging 13/03/2024 14:24:45 [57840, Pref_Gui]: Setting LogControl statuses. 13/03/2024 14:24:46 [57840, UPS_Device]: Enter Retrieve_UPS_Datas 13/03/2024 14:24:46 [57840, UPS_Device]: output.frequency is not supported by server. 13/03/2024 14:24:46 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency 13/03/2024 14:24:46 [57840, UPS_Device]: input.frequency is not supported by server. 13/03/2024 14:24:46 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency 13/03/2024 14:24:46 [57840, UPS_Device]: output.voltage is not supported by server. 13/03/2024 14:24:46 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage 13/03/2024 14:24:46 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. 13/03/2024 14:24:46 [57840, WinNUT]: Updating UPS data for Form. 13/03/2024 14:24:46 [57840, WinNUT]: Updating battery icons based on charge percent: 97% 13/03/2024 14:24:46 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 13/03/2024 14:24:46 [57840, WinNUT]: Update Dial 13/03/2024 14:24:46 [57840, WinNUT]: Update Icon 13/03/2024 14:24:46 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK 13/03/2024 14:24:46 [57840, WinNUT]: Battery Status => Discharging 13/03/2024 14:24:47 [57840, UPS_Device]: Enter Retrieve_UPS_Datas 13/03/2024 14:24:47 [57840, UPS_Device]: output.frequency is not supported by server. 13/03/2024 14:24:47 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency 13/03/2024 14:24:47 [57840, UPS_Device]: input.frequency is not supported by server. 13/03/2024 14:24:47 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency 13/03/2024 14:24:47 [57840, UPS_Device]: output.voltage is not supported by server. 13/03/2024 14:24:47 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage 13/03/2024 14:24:47 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. 13/03/2024 14:24:47 [57840, WinNUT]: Updating UPS data for Form. 13/03/2024 14:24:47 [57840, WinNUT]: Updating battery icons based on charge percent: 97% 13/03/2024 14:24:47 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 13/03/2024 14:24:47 [57840, WinNUT]: Update Dial 13/03/2024 14:24:47 [57840, WinNUT]: Update Icon 13/03/2024 14:24:47 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK 13/03/2024 14:24:47 [57840, WinNUT]: Battery Status => Discharging 13/03/2024 14:24:48 [57840, UPS_Device]: Enter Retrieve_UPS_Datas 13/03/2024 14:24:48 [57840, UPS_Device]: output.frequency is not supported by server. 13/03/2024 14:24:48 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency 13/03/2024 14:24:48 [57840, UPS_Device]: input.frequency is not supported by server. 13/03/2024 14:24:48 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency 13/03/2024 14:24:48 [57840, UPS_Device]: output.voltage is not supported by server. 13/03/2024 14:24:48 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage 13/03/2024 14:24:48 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. 13/03/2024 14:24:48 [57840, WinNUT]: Updating UPS data for Form. 13/03/2024 14:24:48 [57840, WinNUT]: Updating battery icons based on charge percent: 97% 13/03/2024 14:24:48 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 13/03/2024 14:24:48 [57840, WinNUT]: Update Dial 13/03/2024 14:24:48 [57840, WinNUT]: Update Icon 13/03/2024 14:24:48 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK 13/03/2024 14:24:48 [57840, WinNUT]: Battery Status => Discharging 13/03/2024 14:24:49 [57840, UPS_Device]: Enter Retrieve_UPS_Datas 13/03/2024 14:24:49 [57840, UPS_Device]: output.frequency is not supported by server. 13/03/2024 14:24:49 [57840, UPS_Device]: Apply Fallback Value when retrieving output.frequency 13/03/2024 14:24:49 [57840, UPS_Device]: input.frequency is not supported by server. 13/03/2024 14:24:49 [57840, UPS_Device]: Apply Fallback Value when retrieving input.frequency 13/03/2024 14:24:49 [57840, UPS_Device]: output.voltage is not supported by server. 13/03/2024 14:24:49 [57840, UPS_Device]: Apply Fallback Value when retrieving output.voltage 13/03/2024 14:24:49 [57840, UPS_Device]: UPS statuses have not changed since last update, skipping. 13/03/2024 14:24:49 [57840, WinNUT]: Updating UPS data for Form. 13/03/2024 14:24:49 [57840, WinNUT]: Updating battery icons based on charge percent: 97% 13/03/2024 14:24:49 [57840, WinNUT]: Calculated estimated remaining battery time: 01:01:41 13/03/2024 14:24:49 [57840, WinNUT]: Update Dial 13/03/2024 14:24:49 [57840, WinNUT]: Update Icon 13/03/2024 14:24:49 [57840, WinNUT]: NotifyIcon Text => WinNUT Client - 2.3 Connected On Line Battery OK 13/03/2024 14:24:49 [57840, WinNUT]: Battery Status => Discharging 13/03/2024 14:24:49 [57840, Pref_Gui]: Show LogFile EDIT: This may be a synology issue: /var/log/ups.log2024-03-13T15:03:52+01:00 NAS19 synoups: synoups online 2024-03-13T15:03:52+01:00 NAS19 synoups: =====log UPS status start===== 2024-03-13T15:03:52+01:00 NAS19 synoups: device.mfr=American Power Conversion 2024-03-13T15:03:52+01:00 NAS19 synoups: device.model=Back-UPS BX2200MI 2024-03-13T15:03:52+01:00 NAS19 synoups: battery.charge=99 2024-03-13T15:03:52+01:00 NAS19 synoups: battery.runtime=3777 2024-03-13T15:03:52+01:00 NAS19 synoups: battery.voltage=27.2 2024-03-13T15:03:52+01:00 NAS19 synoups: input.voltage=234.0 2024-03-13T15:03:52+01:00 NAS19 synoups: output.voltage= 2024-03-13T15:03:52+01:00 NAS19 synoups: ups.load=0 2024-03-13T15:03:52+01:00 NAS19 synoups: ups.status=OL CHRG 2024-03-13T15:03:52+01:00 NAS19 synoups: =====log UPS status end=====
|
@Chainfire Sorry for taking awhile to get back to you, and glad you were able to get things working! |
UPS variables
The output power should be calculated according to the following. It appears that my UPS variables include output.realpower and output.power, but the the load wattage graph show 0W and percentage of real power. |
Would you please include your WinNUT log as an attachment? |
Log (part)
OK, It seems like I found where the problem is. |
It sounds like I just haven't accounted for .power and .realpower vars yet. Do you know which one is actually the amount of power your UPS is consuming? |
I took a look at the NUT (Network UPS Tools) driver source code. https://github.com/networkupstools/nut/blob/9e029270d7914df27c9743c95aad219d7ea2e32e/drivers/huawei-ups2000.c#L552 .power is apparent power. So .realpower is actually the amount of power my UPS is consuming. |
Hi ! badly reported values :
All these values were correct on old WinNUT version (latest from the previous repo) complete report :
|
Hi @ElGuillermo , Please see #136. Indeed, your NUT server isn't providing a battery voltage or input voltage - yours is only displaying output information in that regard. However, I'm not exactly sure why your UPS load isn't working. Please open a new discussion here with the info you've already provided, along with the WinNUT log file attached. Make sure your log level is set to |
My UPS is on a Synology NAS, I added my IP to permitted devices and am able to connect, but the load wattage graph always shows 0, all others seem to be working normally. Even after adjusting the settings for North American grid Voltage and frequency I'm getting 0% and 0 W on UPS load. My UPS is APC and I installed WinNUT on Windows 11 Pro.
The text was updated successfully, but these errors were encountered: