Skip to content

Latest commit

 

History

History
309 lines (247 loc) · 11.5 KB

devenv_setup.md

File metadata and controls

309 lines (247 loc) · 11.5 KB
Raw

MicroShift Development Environment

This document describes how to setup the MicroShift development environment running in a virtual machine.

Create Development Virtual Machine

Start by downloading one of the DVD ISO images for the x86_64 or aarch64 architecture:

Creating VM

Log into the hypervisor host and run the following commands to create a RHEL virtual machine with 4 cores, 8GB of RAM and 100GB of storage.

See Increase Virtual Machine Disk Size section for increasing the storage size if necessary.

Move the DVD ISO image to /var/lib/libvirt/images directory and run the following commands to install the libvirt packages and create a virtual machine.

VMNAME="microshift-dev"

git clone https://github.com/openshift/microshift.git ~/microshift
cd ~/microshift
./scripts/devenv-builder/manage-vm.sh config
./scripts/devenv-builder/manage-vm.sh create -n ${VMNAME}

Note that the manage-vm.sh script can also be used on the hypervisor host to manipulate the virtual machines where MicroShift will run.

  • Use the create subcommand to create a new virtual machine
  • Use the delete subcommand to remove a virtual machine
  • Use the ip subcommand to find the IP address of a virtual machine

If your host is configured with virtual machine disk storage somewhere other than the default, set MICROSHIFT_VMDISKDIR to point to the location (e.g. "${HOME}/VMs").

Set MICROSHIFT_SSH_KEY_FILE to the path to an SSH public key to have that key added to the virtual machine for easier login.

Configuring VM

After the virtual machine installation is finished, the manage-vm.sh script prompts for a user name and password to register the operating system with a Red Hat subscription.

A valid Red Hat subscription is required before running the virtual machine configuration procedure.

Proceed by downloading the OpenShift pull secret from the https://console.redhat.com/openshift/downloads#tool-pull-secret page and store it in the ~/.pull-secret.json file.

The pull secret will also be used in the CRI-O configuration for pulling the MicroShift container images.

Run the following command to configure SSH, SUDO, upgrade the system, firewall, build and install MicroShift including its runtime dependencies, Kubernetes client utilities, and enable remote Cockpit console.

VMIPADDR=$(./scripts/devenv-builder/manage-vm.sh ip -n ${VMNAME})
# Enter 'microshift' without quotes as a password if prompted
ssh-copy-id -f microshift@${VMIPADDR}

scp ./scripts/devenv-builder/configure-vm.sh microshift@${VMIPADDR}:
scp ~/.pull-secret.json microshift@${VMIPADDR}:
ssh -t microshift@${VMIPADDR} "~/configure-vm.sh ~/.pull-secret.json"

The script prompts for Red Hat subscription credentials if the system has not been registered yet.

The configuration script should run unattended and finish with the following message.

The configuration phase completed. Run the following commands to:
 - Wait until all MicroShift pods are running
      watch sudo $(which oc) --kubeconfig /var/lib/microshift/resources/kubeadmin/kubeconfig get pods -A

 - Get MicroShift logs
      sudo journalctl -u microshift

 - Get microshift-etcd logs
      sudo journalctl -u microshift-etcd.scope

 - Clean up MicroShift service configuration
      echo 1 | sudo /usr/bin/microshift-cleanup-data --all

Done

You should now be able to access the virtual machine Cockpit console using the https://${VMIPADDR}:9090 URL.

Build and Run MicroShift

Log into the development virtual machine with the microshift:microshift user credentials.

The https://github.com/openshift/microshift.git MicroShift repository is already available at ~/microshift directory as an artifact of the configure-vm.sh script executed in the previous steps.

Building MicroShift Executable

Run make command in the top-level directory. If necessary, add DEBUG=true argument to the make command for building a binary with debug symbols.

cd ~/microshift
make clean
make

The artifact of the build is the microshift executable file located in the _output/bin directory.

Building RPM Packages

Run make command with the rpm or srpm argument in the top-level directory.

cd ~/microshift
make rpm
make srpm

The artifacts of the build are located in the _output/rpmbuild directory.

Running MicroShift

Stop the MicroShift service and clean up its configuration data before running a standalone MicroShift executable.

echo 1 | sudo ~/microshift/scripts/microshift-cleanup-data.sh --all --keep-images

Run the MicroShift executable file in the background using the following command.

nohup sudo ~/microshift/_output/bin/microshift run >> ~/microshift.log &

Examine the ~/microshift.log log file to ensure a successful startup.

An alternative way of running MicroShift is to update /usr/bin/microshift file and restart the service. The logs would then be accessible by running the journalctl -xu microshift command.

sudo cp -f ~/microshift/_output/bin/microshift /usr/bin/microshift
sudo systemctl restart microshift

Copy kubeconfig to the default location that can be accessed without the administrator privilege.

mkdir -p ~/.kube/
sudo cat /var/lib/microshift/resources/kubeadmin/kubeconfig > ~/.kube/config

Verify that the MicroShift is up and running.

oc get cs
watch oc get pods -A

Stopping MicroShift

Run the following commands to stop the MicroShift process and make sure it is shut down by examining its log file.

sudo kill microshift && sleep 3
tail -3 ~/microshift.log

If MicroShift is running as a service, it is necessary to execute the sudo systemctl stop microshift command to shut it down and review the output of the journalctl -xu microshift command to verify the service termination.

This command only stops the MicroShift process. To perform the full cleanup including CRI-O, MicroShift and OVN caches, run the following script.

echo 1 | sudo ~/microshift/scripts/microshift-cleanup-data.sh --all

The full cleanup does not remove OVS configuration applied by the MicroShift service initialization sequence. Run the sudo /usr/bin/configure-ovs.sh OpenShiftSDN command to revert to the original network settings.

Quick Development and Edge Testing Cycle

During the development cycle, it is practical to build and run MicroShift executable as demonstrated in the Building MicroShift and Running MicroShift sections above. However, it is also necessary to have a convenient technique for testing the system in a setup resembling the production environment. Such an environment can be created in a virtual machine as described in the Install MicroShift on RHEL for Edge document.

Once a RHEL for Edge virtual machine is created, it is running a version of MicroShift with the latest changes. When MicroShift code is updated and the executable file is rebuilt with the new changes, the updates need to be installed on RHEL for Edge OS.

Since it takes a long time to create a new RHEL for Edge installer ISO and deploy it on a virtual machine, the remainder of this section describes a simple technique for replacing the MicroShift executable file on an existing RHEL for Edge OS installation.

Configuring ostree

Log into the RHEL for Edge machine using redhat:redhat credentials. Run the following command for configuring the ostree to allow transient overlays on top of the /usr directory.

sudo rpm-ostree usroverlay

This would enable a development mode where users can overwrite /usr directory contents. Note that all changes will be discarded on reboot.

Updating MicroShift Executable

Log into the development virtual machine with the microshift:microshift user credentials.

It is recommended to update the local /etc/hosts to resolve the microshift-edge host name or use its IP address as presented below. Also, copy the local SSH keys to allow the microshift user to run SSH commands without a password on the RHEL for Edge machine.

VMIPADDR=192.168.122.101
ssh-copy-id redhat@${VMIPADDR}

Rebuild the MicroShift executable as described in the Building MicroShift Executable section and run the following commands to copy, cleanup, replace and restart the new service on the RHEL for Edge system.

scp ~/microshift/_output/bin/{microshift,microshift-etcd} redhat@${VMIPADDR}:
ssh redhat@${VMIPADDR} ' \
    echo 1 | sudo /usr/bin/microshift-cleanup-data --all --keep-images && \
    sudo cp -f ~redhat/{microshift,microshift-etcd} /usr/bin/ && \
    sudo systemctl enable microshift --now && \
    echo Done '

Profile MicroShift

Golang pprof is a useful tool for serving runtime profiling data via an HTTP server in the format expected by the pprof visualization tool.

Runtime profiling data can be accessed from the command line as described in the pprof documentation. As an example, the following command can be used to look at the heap profile.

oc get --raw /debug/pprof/heap > heap.pprof
go tool pprof heap.pprof

To view all the available profiles, run oc get --raw /debug/pprof.

Troubleshooting

No Valid Repository ID for OpenShift RPM Channels

The following error message may be encountered when enabling the OpenShift RPM repositories.

Error: 'fast-datapath-for-rhel-9-x86_64-rpms' does not match a valid repository ID.
Use "subscription-manager repos --list" to see valid repositories.

To mitigate this problem, make sure that your system is registered and attached to the Red Hat Openshift Container Platform or equivalent subscription. Once the proper subscription is configured, run the subscription-manager command to verify the enabled repositories.

$ sudo subscription-manager repos --list-enabled
+----------------------------------------------------------+
    Available Repositories in /etc/yum.repos.d/redhat.repo
+----------------------------------------------------------+
Repo ID:   rhel-9-for-x86_64-baseos-rpms
Repo Name: Red Hat Enterprise Linux 9 for x86_64 - BaseOS (RPMs)
Repo URL:  https://cdn.redhat.com/content/dist/rhel9/$releasever/x86_64/baseos/os
Enabled:   1

Repo ID:   fast-datapath-for-rhel-9-x86_64-rpms
Repo Name: Fast Datapath for RHEL 9 x86_64 (RPMs)
Repo URL:  https://cdn.redhat.com/content/dist/layered/rhel9/x86_64/fast-datapath/os
Enabled:   1

Repo ID:   rhel-9-for-x86_64-appstream-rpms
Repo Name: Red Hat Enterprise Linux 9 for x86_64 - AppStream (RPMs)
Repo URL:  https://cdn.redhat.com/content/dist/rhel9/$releasever/x86_64/appstream/os
Enabled:   1

Increase Virtual Machine Disk Size

Log into the hypervisor host, and run the following commands to resize its disk.

VM_NAME=microshift-dev
VM_DISK=/var/lib/libvirt/images/${VM_NAME}.qcow2
INCREASE_BY=20

sudo virsh shutdown ${VM_NAME}
# Wait until the host is shut off

sudo qemu-img resize ${VM_DISK} +${INCREASE_BY}G
sudo virsh start ${VM_NAME}

Log into the virtual machine and run the following commands to extend its root partition.

# Use 'lsblk' command output to see your device and partition to be resized
DEVICE=/dev/vda
PARTNUM=3

# Resize the device
sudo parted ${DEVICE} ---pretend-input-tty resizepart ${PARTNUM} 100%
sudo pvresize ${DEVICE}${PARTNUM}
sudo lvextend -l +95%FREE /dev/mapper/rhel-root

# Resize the file system
sudo xfs_growfs /dev/mapper/rhel-root