# replace dtoverlay=vc4-kms-v3d with
dtoverlay=vc4-fkms-v3d

# Enable audio for PiZero(loads snd_bcm2835)
#dtoverlay=pwm-2chan,pin=18,func=2,pin2=19,func2=2
dtoverlay=audremap,pins_18_19
dtparam=audio=on

# disable i2c, pin use by h-sync & v-sync
dtparam=i2c_arm=off

# uncomment to use spi0 with cs0 & cs1 retirected on pin 26 & 27 
#dtparam=spi=on
#dtoverlay=spi0-cs,cs0_pin=26,cs1_pin=27

#information https://www.raspberrypi.org/documentation/hardware/raspberrypi/dpi/README.md 
#load /boot/overlays/vga565.dtbo
dtoverlay=vga565
#alternate config, no need dtbo file
#gpio=2-8,12-17,20-24=a2

dpi_output_format=0x13
enable_dpi_lcd=1
display_default_lcd=1

dpi_group=2
dpi_mode=16
#---------------- dpi_mode line ---------------------
#---> 640x480 60hz   dpi_mode=4
#---> 800x600 60hz   dpi_mode=9
#---> 1024x768 60hz  dpi_mode=16
#---> 1280x768 60hz  dpi_mode=23
#---> 1280x800 60hz  dpi_mode=28
#---> 1280x960 60hz  dpi_mode=32
#---> 1280x1024 60hz dpi_mode=35
#---> 1360x768 60hz  dpi_mode=39
#---> 1366x768 60hz  dpi_mode=81
#---> 1400x1050 60hz dpi_mode=42
#---> 1440x900 60hz  dpi_mode=47
#---> 1600x1200 60hz dpi_mode=51
#---> 1680x1050 60hz dpi_mode=58
#---> 1920x1080 60hz dpi_mode=82
#---> 1920x1200 60hz dpi_mode=69
#---> 1920x1440 60hz dpi_mode=73