Node End-To-End (e2e) tests

Node e2e tests are component tests meant for testing the Kubelet code on a custom host environment. Tests can be run either locally or against a host running on Google Compute Engine (GCE). Node e2e tests are run as both pre- and post- submit tests by the Kubernetes project.

Note: Linux only. Mac and Windows unsupported.

Note: There is no scheduler running. The e2e tests have to do manual scheduling, e.g. by using framework.PodClient.

Running tests

Locally

Why run tests locally? It is much faster than running tests remotely.

Prerequisites:

Install etcd and include the path to the installation in your PATH
- Verify etcd is installed correctly by running which etcd
- Or make etcd binary available and executable at /tmp/etcd
containerd configured with the cgroupfs driver
Working CNI
- Ensure that you have a valid CNI configuration in /etc/cni/net.d/. For testing purposes, a bridge configuration should work.

From the Kubernetes base directory, run:

make test-e2e-node

This will run the ginkgo binary against the subdirectory test/e2e_node, which will in turn:

Ask for sudo access (needed for running some of the processes)
Build the Kubernetes source code
Pre-pull docker images used by the tests
Start a local instance of etcd
Start a local instance of kube-apiserver
Start a local instance of kubelet
Run the test using the locally started processes
Output the test results to STDOUT
Stop kubelet, kube-apiserver, and etcd

To view the settings and print help, run:

make test-e2e-node PRINT_HELP=y

Remotely

Why run tests remotely? Tests will be run in a customized testing environment. This environment closely mimics the pre- and post- submit testing performed by the project.

Prerequisites:

Join the googlegroup dev@kubernetes.io
- This provides read access to the node test images.
Setup a Google Cloud Platform account and project with Google Compute Engine enabled
Install and setup the gcloud sdk
- Set your project and a zone by running gcloud config set project $PROJECT and gcloud config set compute/zone $zone
- Verify the sdk is setup correctly by running gcloud compute instances list and gcloud compute images list --project cos-cloud
- Configure credentials for the same project that you configured above for "application defaults". This can be done with gcloud auth application-default login or by setting the GOOGLE_APPLICATION_CREDENTIALS environment variable to a path to a credentials file.

Run:

make test-e2e-node REMOTE=true

This will:

Build the Kubernetes source code
Create a new GCE instance using the default test image
- Instance will be named something like test-cos-beta-81-12871-44-0
Lookup the instance public ip address
Copy a compressed archive file to the host containing the following binaries:
- ginkgo
- kubelet
- kube-apiserver
- e2e_node.test (this binary contains the actual tests to be run)
Unzip the archive to a directory under /tmp/gcloud
Run the tests using the ginkgo command
- Starts etcd, kube-apiserver, kubelet
- The ginkgo command is used because this supports more features than running the test binary directly
Output the remote test results to STDOUT
scp the log files back to the local host under /tmp/_artifacts/e2e-node-containervm-v20160321-image
Stop the processes on the remote host
Leave the GCE instance running

Note: Subsequent tests run using the same image will reuse the existing host instead of deleting it and provisioning a new one. To delete the GCE instance after each test see DELETE_INSTANCE.

Additional Remote Options

Run tests using different images

This is useful if you want to run tests against a host using a different OS distro or container runtime than provided by the default image.

List the available test images using gcloud.

make test-e2e-node LIST_IMAGES=true

This will output a list of the available images for the default image project.

Then run:

make test-e2e-node REMOTE=true IMAGES="<comma-separated-list-images>"

Run tests against a running GCE instance (not an image)

This is useful if you have an host instance running already and want to run the tests there instead of on a new instance.

make test-e2e-node REMOTE=true HOSTS="<comma-separated-list-of-hostnames>"

Delete instance after tests run

This is useful if you want recreate the instance for each test run to trigger flakes related to starting the instance.

make test-e2e-node REMOTE=true DELETE_INSTANCES=true

Keep instance, test binaries, and processes around after tests run

This is useful if you want to manually inspect or debug the kubelet process run as part of the tests.

make test-e2e-node REMOTE=true CLEANUP=false

Run tests using an image in another project

This is useful if you want to create your own host image in another project and use it for testing.

make test-e2e-node REMOTE=true IMAGE_PROJECT="<name-of-project-with-images>" IMAGES="<image-name>"

Setting up your own host image may require additional steps such as installing etcd or docker. See setup_host.sh for common steps to setup hosts to run node tests.

Create instances using a different instance name prefix

This is useful if you want to create instances using a different name so that you can run multiple copies of the test in parallel against different instances of the same image.

make test-e2e-node REMOTE=true INSTANCE_PREFIX="my-prefix"

Run tests using a custom image configuration

This is useful if you want to test out different runtime configurations. First, make a local (temporary) copy of the base image config from the test-infra repo: https://github.com/kubernetes/test-infra/tree/master/jobs/e2e_node

Make your desired modifications to the config, and update data paths to be absolute paths to the relevant files on your local machine (e.g. prepend your home directory path to each). For example:

 images:
   cos-stable:
     image_regex: cos-stable-60-9592-84-0
     project: cos-cloud
-    metadata: "user-data</go/src/github.com/containerd/cri/test/e2e_node/init.yaml,containerd-configure-sh</go/src/github.com/containerd/cri/cluster/gce/configure.sh,containerd-extra-init-sh</go/src/github.com/containerd/cri/test/e2e_node/gci-init.sh,containerd-env</workspace/test-infra/jobs/e2e_node/containerd/cri-master/env,gci-update-strategy=update_disabled"
+    metadata: "user-data</home/tallclair/go/src/github.com/containerd/cri/test/e2e_node/init.yaml,containerd-configure-sh</home/tallclair/go/src/github.com/containerd/cri/cluster/gce/configure.sh,containerd-extra-init-sh</home/tallclair/go/src/github.com/containerd/cri/test/e2e_node/gci-init.sh,containerd-env</home/tallclair/workspace/test-infra/jobs/e2e_node/containerd/cri-master/env,gci-update-strategy=update_disabled"

Finally, run the tests with your custom config:

make test-e2e-node REMOTE=true IMAGE_CONFIG_FILE="<local file>" [...]

Image configuration files can further influence how FOCUS and SKIP match test cases.

For example:

--focus="\[NodeFeature:.+\]" --skip="\[Flaky\]|\[Serial\]"

runs all e2e tests labeled "[NodeFeature:*]" and will skip any tests labeled "[Flaky]" or "[Serial]".

Two example e2e tests that match this expression are:

https://github.com/kubernetes/kubernetes/blob/0e2220b4462130ae8a22ed657e8979f7844e22c1/test/e2e_node/security_context_test.go#L155
https://github.com/kubernetes/kubernetes/blob/0e2220b4462130ae8a22ed657e8979f7844e22c1/test/e2e_node/security_context_test.go#L175

However, image configuration files select test cases based on the tests field.

See https://github.com/kubernetes/test-infra/blob/4572dc3bf92e70f572e55e7ac1be643bdf6b2566/jobs/e2e_node/benchmark-config.yaml#L22-23 for an example configuration.

If the Prow e2e job configuration does not specify the tests field, FOCUS and SKIP will run as expected.

Additional test options for both remote and local execution

Only run a subset of the tests

To run tests matching a regex:

make test-e2e-node REMOTE=true FOCUS="<regex-to-match>"

To run tests NOT matching a regex:

make test-e2e-node REMOTE=true SKIP="<regex-to-match>"

These are often configured in the CI environment. For example, the ci-kubernetes-node-kubelet uses --focus="\[NodeConformance\]" --skip="\[Flaky\]|\[Serial\]", this can be specified to the make target as:

make test-e2e-node REMOTE=true FOCUS="\[NodeConformance\]" SKIP="\[Flaky\]|\[Serial\]"

See https://onsi.github.io/ginkgo/#focused-specs in the Grinkgo documentation to learn more about how FOCUS and SKIP work.

Run a single test

To run a particular e2e test, simply pass the Grinkgo It string to the --focus argument.

For example, suppose we have the following test case: https://github.com/kubernetes/kubernetes/blob/0e2220b4462130ae8a22ed657e8979f7844e22c1/test/e2e_node/security_context_test.go#L175. We could select this test case by adding the argument:

--focus="should not show its pid in the non-hostpid containers \[NodeFeature:HostAccess\]"

Run all tests related to a feature

In contrast, to run all node e2e tests related to the "HostAccess" feature one could run:

--focus="\[NodeFeature:HostAccess\]"

Run tests continually until they fail

This is useful if you are trying to debug a flaky test failure. This will cause ginkgo to continually run the tests until they fail. Note: this will only perform test setup once (e.g. creating the instance) and is less useful for catching flakes related creating the instance from an image.

make test-e2e-node REMOTE=true RUN_UNTIL_FAILURE=true

Run tests in parallel

Running test in parallel can usually shorten the test duration. By default node e2e test runs with--nodes=8 (see ginkgo flag --nodes). You can use the PARALLELISM option to change the parallelism.

make test-e2e-node PARALLELISM=4 # run test with 4 parallel nodes
make test-e2e-node PARALLELISM=1 # run test sequentially

Run tests with kubenet network plugin

kubenet is the default network plugin used by kubelet since Kubernetes 1.3. The plugin requires CNI and nsenter.

Currently, kubenet is enabled by default for Remote execution REMOTE=true, but disabled for Local execution. Note: kubenet is not supported for local execution currently. This may cause network related test result to be different for Local and Remote execution. So if you want to run network related test, Remote execution is recommended.

To enable/disable kubenet:

# enable kubenet
make test-e2e-node TEST_ARGS='--kubelet-flags="--network-plugin=kubenet --network-plugin-dir=/opt/cni/bin"'
# disable kubenet
make test-e2e-node TEST_ARGS='--kubelet-flags="--network-plugin= --network-plugin-dir="'

Additional QoS Cgroups Hierarchy level testing

For testing with the QoS Cgroup Hierarchy enabled, you can pass --cgroups-per-qos flag as an argument into Ginkgo using TEST_ARGS

make test_e2e_node TEST_ARGS="--cgroups-per-qos=true"

Testgrid

TestGrid (https://testgrid.k8s.io) is a publicly hosted and configured automated testing framework developed by Google.

Here (https://testgrid.k8s.io/sig-node-containerd#containerd-node-features) we see an example of an e2e Prow job running e2e tests. Each gray row in the grid corresponds to an e2e test or a stage of the job (i.e. created a VM, downloaded some files). Passed tests are colored green and failed tests are colored red.

Notes on tests run by the Kubernetes project during pre-, post- submit.

The node e2e tests are run by the Prow for each Pull Request and the results published in the status checks box at the bottom of the Pull Request below all comments. To have Prow re-run the node e2e tests against a PR add the comment /test pull-kubernetes-node-e2e and include a link to the test failure logs if caused by a flake. Note that commands to Prow must be on separate lines from any commentary.

For example,

/test pull-kubernetes-node-e2e
flake due to #12345

The PR builder runs tests against the images listed in image-config.yaml.

Other node e2e Prow jobs run against different images depending on the configuration chosen in the test-infra repo. The source code for these tests comes from the kubernetes/kubernetes repo.

Notes on the Topology Manager tests

The Topology Manager tests require a multi-numa node box (two or more nodes) with at least one SRIOV device installed to run. The tests automatically skip if the conditions aren't met.

The test code statically includes the manifests needed to configure the SRIOV device plugin. However, is not possible to anticipate all the possible configuration, hence the included configuration is intentionally minimal.

It is recommended you supply a ConfigMap describing the cards installed in the machine running the tests using TEST_ARGS. Here's the upstream reference

make test-e2e-node TEST_ARGS='--sriovdp-configmap-file="/path/to/sriovdp-config-map.yaml"'

You must have the Virtual Functions (VFs) already created in the node you want to run the test on. Example command to create the VFs - please note the PCI address of the SRIOV device depends on the host system hardware.

cat /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sriov_numvfs
echo 7 > /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sriov_numvfs

Some topology manager tests require minimal knowledge of the host topology in order to be performed. The required information is to which NUMA node in the system are the SRIOV device attached to. The test code tries to autodetect the information it needs, skipping the relevant tests if the autodetection fails.

You can override the autodetection adding annotations to the config map like this example:

metadata:
  annotations:
    pcidevice_node0: "1"
    pcidevice_node1: "0"
    pcidevice_node2: "0"
    pcidevice_node3: "0"

Please note that if you add the annotations, then you must provide the full information: you must should specify the number of SRIOV devices attached to each NUMA node in the system, even if the number is zero.

Debugging E2E Tests Locally

Install kubectl on the node
Set your KUBCONFIG environment variable to reference the kubeconfig created by the e2e node tests export KUBECONFIG=./_output/local/go/bin/kubeconfig
Inspect the node and pods as needed while the tests are running
```
$ kubectl get pod -A
$ kubectl describe node
```

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

e2e-node-tests.md

e2e-node-tests.md

Node End-To-End (e2e) tests

Running tests

Locally

Remotely

Additional Remote Options

Run tests using different images

Run tests against a running GCE instance (not an image)

Delete instance after tests run

Keep instance, test binaries, and processes around after tests run

Run tests using an image in another project

Create instances using a different instance name prefix

Run tests using a custom image configuration

Additional test options for both remote and local execution

Only run a subset of the tests

Run a single test

Run all tests related to a feature

Run tests continually until they fail

Run tests in parallel

Run tests with kubenet network plugin

Additional QoS Cgroups Hierarchy level testing

Testgrid

Notes on tests run by the Kubernetes project during pre-, post- submit.

Notes on the Topology Manager tests

Debugging E2E Tests Locally

Files

e2e-node-tests.md

Latest commit

History

e2e-node-tests.md

File metadata and controls

Node End-To-End (e2e) tests

Running tests

Locally

Remotely

Additional Remote Options

Run tests using different images

Run tests against a running GCE instance (not an image)

Delete instance after tests run

Keep instance, test binaries, and processes around after tests run

Run tests using an image in another project

Create instances using a different instance name prefix

Run tests using a custom image configuration

Additional test options for both remote and local execution

Only run a subset of the tests

Run a single test

Run all tests related to a feature

Run tests continually until they fail

Run tests in parallel

Run tests with kubenet network plugin

Additional QoS Cgroups Hierarchy level testing

Testgrid

Notes on tests run by the Kubernetes project during pre-, post- submit.

Notes on the Topology Manager tests

Debugging E2E Tests Locally