You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Using a single 74HC00 would be insufficient to make a decoder with the address mapping of all desired devices.
Instead, a 74HCT138 is to be used as it provides 8 outputs that could be used as a chip-select signal for more devices.
Connecting A15, A14, and A13 of the HD6309 to the A0, A1, and A2 inputs of the 74HC138.
Connecting the three enable inputs (G1, G2A, and G2B) of the 74HC138 as follows:
G1 to VCC (logic high)
G2A and G2B to ground (logic low)
Connecting the eight outputs (Y0-Y7) of the 74HC138 to the CS (chip select) inputs of the RAM, ROM, and UART chips as follows:
Y0 to the CS input of the first RAM chip
Y1 to the CS input of the second RAM chip (for future expansion)
Y2 to the CS input of the ROM chip
Y3 to the CS input of the UART chip
Y4-Y7 to be used as extension port CS pins
The text was updated successfully, but these errors were encountered:
izne
changed the title
Address decoder sufficiency
Address decoder update
Mar 5, 2023
Using a single 74HC00 would be insufficient to make a decoder with the address mapping of all desired devices.
Instead, a 74HCT138 is to be used as it provides 8 outputs that could be used as a chip-select signal for more devices.
The text was updated successfully, but these errors were encountered: