Lumi.plug.mmeu01: no more power consumption after updating to 6.17.0

[marc965]

Describe the issue you are experiencing

Installed v6.17.0: All Lumi.plug.mmeu01 shows power and consuption not available.

But information is still provided from deCONZ: see log:

15:11:20:165 ZCL attribute report 0x04CF8CDF3C8A37D6 for cluster: 0xFCC0, ep: 0x01, frame control: 0x1C, mfcode: 0x115F 
15:11:21:601 0x04CF8CDF3C8A340E extract Xiaomi special attribute 0x00F7
15:11:21:601 	64 on/off 1
15:11:21:601 	03 Device temperature 25 °C
15:11:21:602 	98 power 125.519997 (126)
15:11:21:602 	95 consumption 97.154686 (97155)
15:11:21:602 	96 voltage 2330.000000 (233)
15:11:21:602 	97 current 538.712463 (539)
15:11:21:603 	05 RSSI dB (?) 4 (0x0004)
15:11:21:603 	9a unknown 0 (0x00)
15:11:21:603 	08 unknown 278 (0x0116)
15:11:21:603 	07 unknown 0 (0x0000000000000000)
15:11:21:604 	09 unknown 3329 (0x0D01)
15:11:21:604 	0b unknown 0 (0x00)
15:11:21:604 	9b Consumer connected (yes/no) 1

What type of installation are you running?

Home Assistant OS

Which operating system are you running on?

Home Assistant Operating System

Which add-on are you reporting an issue with?

deCONZ

What is the version of the add-on?

6.17.0

Steps to reproduce the issue

1. install 6.17.0
2. Power and Consumption not longer available
3. Reinstall 6.15.0 from backup
4. Power and Consumtion are back again
   ...

System Health information

no repairs available

Anything in the Supervisor logs that might be useful for us?

no add-on specific error log found
Home Assistant is working normally...

Anything in the add-on logs that might be useful for us?

no add-on specific error log found
Home Assistant is working normally...

Additional information

With deConz Version 6.15.0 all is working good...
i have only issue #2649 with 6.15.0.
with Version 6.17.0 i have one additional issue: #2730.
this issue comes with 6.16.0.
Rolled back to 6.15.0 succesfully.

[realm360]

Same problem here. 2 Aqara smart plugs not showing watt (power) info anymore after 6.15.0
Always worked perfect.
I use them for wash and tumble dryer. Automation to notify me.
Meters just show 0
Consumption meter shows Amount of kWh it already done. But isn't updating anymore after 6.15

Deconz ver.: 6.17.0
phoscon ver.: 2.19.01 / 19-9-2022
firmware conbee 2 ver.: 26720700
Aqara plug 1 ver.: 09-10-2019
Aqara plug 2 ver.: 09-22-2020

Home Assistant 2022.11.2
Supervisor 2022.10.2
Operating System 9.3
Frontend 20221108.0 - latest

[github-actions]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.