"use strict"

const bindings = require('bindings')

let RtAudio

if (process.platform === 'win32') {
  RtAudio = bindings('rtaudio-js-win32').NodeRtAudio
} else if (process.platform === 'linux') {
  try {
    RtAudio = bindings('rtaudio-js-linux-custom').NodeRtAudio
  } catch (_err) {
    try {
      RtAudio = bindings('rtaudio-js-linux-pulse.node').NodeRtAudio
    } catch (_err) {
      RtAudio = bindings('rtaudio-js-linux-alsa.node').NodeRtAudio
    }
  }
} else {
  throw 'RtAudio.js supports Linux and Windows only.'
}

module.exports.RtAudio = RtAudio

/** Audio API specifier arguments */
module.exports.RtAudioApi = {
  /** Search for a working compiled API. */
  UNSPECIFIED: 0,

  /** The Linux PulseAudio API. */
  LINUX_PULSE: 4,

  /** The Microsoft WASAPI API. */
  WINDOWS_WASAPI: 7,

  /** The Microsoft DirectSound API. */
  WINDOWS_DS: 8,
}

/** 
 * RtAudio data format type.
 *
 * Support for signed integers and floats.  Audio data fed to/from an
 * RtAudio stream is assumed to ALWAYS be in host byte order.  The
 * internal routines will automatically take care of any necessary
 * byte-swapping between the host format and the soundcard.  Thus,
 * endian-ness is not a concern in the following format definitions.
 * Note that there are no range checks for floating-point values that
 * extend beyond plus/minus 1.0.
 */
module.exports.RtAudioFormat = {
  /** 8-bit signed integer. */
  RTAUDIO_SINT8: 0x1,

  /** 16-bit signed integer. */
  RTAUDIO_SINT16: 0x2,

  /** 32-bit signed integer. */
  RTAUDIO_SINT32: 0x8,

  /** Normalized between plus/minus 1.0. */
  RTAUDIO_FLOAT32: 0x10,

  /** Normalized between plus/minus 1.0. */
  RTAUDIO_FLOAT64: 0x20,
}

/** 
 * The following flags can be OR'ed together to allow a client to
 * make changes to the default stream behavior.
 * 
 * By default, RtAudio streams pass and receive audio data from the
 * client in an interleaved format.  By passing the
 * RTAUDIO_NONINTERLEAVED flag to the openStream() function, audio
 * data will instead be presented in non-interleaved buffers.  In
 * this case, each buffer argument in the RtAudioCallback function
 * will point to a single array of data, with \c nFrames samples for
 * each channel concatenated back-to-back.  For example, the first
 * sample of data for the second channel would be located at index \c
 * nFrames (assuming the \c buffer pointer was recast to the correct
 * data type for the stream).
 * 
 * Certain audio APIs offer a number of parameters that influence the
 * I/O latency of a stream.  By default, RtAudio will attempt to set
 * these parameters internally for robust (glitch-free) performance
 * (though some APIs, like Windows DirectSound, make this difficult).
 * By passing the RTAUDIO_MINIMIZE_LATENCY flag to the openStream()
 * function, internal stream settings will be influenced in an attempt
 * to minimize stream latency, though possibly at the expense of stream
 * performance.
 * 
 * If the RTAUDIO_HOG_DEVICE flag is set, RtAudio will attempt to
 * open the input and/or output stream device(s) for exclusive use.
 * Note that this is not possible with all supported audio APIs.
 * 
 * If the RTAUDIO_SCHEDULE_REALTIME flag is set, RtAudio will attempt 
 * to select realtime scheduling (round-robin) for the callback thread.
 */
module.exports.RtAudioStreamFlags = {
  /** Use non-interleaved buffers (default = interleaved). */
  RTAUDIO_NONINTERLEAVED: 0x1,

  /** Attempt to set stream parameters for lowest possible latency. */
  RTAUDIO_MINIMIZE_LATENCY: 0x2,

  /** Attempt grab device and prevent use by others. */
  RTAUDIO_HOG_DEVICE: 0x4,

  /** Try to select realtime scheduling for callback thread. */
  RTAUDIO_SCHEDULE_REALTIME: 0x8,

  /** Use the "default" PCM device (ALSA only). */
  RTAUDIO_ALSA_USE_DEFAULT: 0x10,

  /** Do not automatically connect ports (JACK only). */
  RTAUDIO_JACK_DONT_CONNECT: 0x20,
}

/** RtAudio error types */
module.exports.RtAudioErrorType = {
  /** A non-critical error. */
  WARNING: 0,

  /** A non-critical error which might be useful for debugging. */
  DEBUG_WARNING: 1,

  /** The default, unspecified error type. */
  UNSPECIFIED: 2,

  /** No devices found on system. */
  NO_DEVICES_FOUND: 3,

  /** An invalid device ID was specified. */
  INVALID_DEVICE: 4,

  /** An error occurred during memory allocation. */
  MEMORY_ERROR: 5,

  /** An invalid parameter was specified to a function. */
  INVALID_PARAMETER: 6,

  /** The function was called incorrectly. */
  INVALID_USE: 7,

  /** A system driver error occurred. */
  DRIVER_ERROR: 8,

  /** A system error occurred. */
  SYSTEM_ERROR: 9,

  /** A thread error occurred. */
  THREAD_ERROR: 10,
}

/** 
 * Notification of a stream over- or underflow is indicated by a
 * non-zero stream \c status argument in the RtAudioCallback function.
 * The stream status can be one of the following two options,
 * depending on whether the stream is open for output and/or input:
 */
module.exports.RtAudioStreamStatus = {
  /** Input data was discarded because of an overflow condition at the driver. */
  RTAUDIO_INPUT_OVERFLOW: 1,
  /** The output buffer ran low, likely producing a break in the output sound. */
  RTAUDIO_OUTPUT_UNDERFLOW: 2,
}