This work is licensed under the CC0 1.0 Universal license terms. Refer to the License file in this directory for details.
Use on monitors and laptops, workbenches, in cars, on walls and furniture.
- No knobs to tighten as there is no need to keep adjusting the viewing angle
- Holder rotates to expose either the main or the selfie camera
- Strong magnets keep the phone safe even with the metal plate inside the case
- Slider allows phone to rest on table to avoid small laptops (13") from falling backwards
- Customizable colors and color combinations
- Brandable face plates
| Index | STL File Name | Material |
|---|---|---|
| 1 | base.stl | Prusament PETG |
| 2 | slider-bracket.stl | Prusament PC Blend |
| 3 | slider.stl | Prusament PETG |
| 4 | slider-lock.stl | Prusament PC Blend |
| 5 | axle.stl | Prusament PC Blend |
| 6 | - | Prusament PETG |
| 7 | arm-bracket.stl | Prusament PC Blend |
| 8 | arm-top.stl | Prusament PC Blend |
| 9 | holder-insert-mag.stl | Prusament PETG |
| 10 | holder-insert-no-mag.stl | Prusament PETG |
| 11 | holder-bracket.stl | Prusament PC Blend |
| 12 | arm.stl | Prusament PC Blend |
| 13 | slider-connector.stl | Prusament PC Blend |
| Index | Description | Link |
|---|---|---|
| 14 | One of the wires from a small binder clip | link |
| 15 | Vinyl decal - magnet side; Cricut Premium Vynil True Brushed | link |
| 16 | Magnets - 4 x N52 1/2 1/8, Nickel-coated | link |
| 17 | Silicone ring cut to fit the holder insert channel; Scunci No-slip Grip Evolution Bright Jelly Ponytailers | link |
| 18 | Branding vinyl decal - non-magnet side; Cricut Premium Vynil True Brushed with logo cutout | link |
| 19 | 4-40 x 3/4 hex flat head cap screw | link |
| 20 | 18-8 4-40 black oxide small pattern nut | link |
| 21 | Natural polyurethane double coated foam tape 1" width | link |