dg-100.cc

/*

    GlobalSat DG-100/DG-200 GPS data logger download.

    Copyright (C) 2007  Mirko Parthey, mirko.parthey@informatik.tu-chemnitz.de
    Copyright (C) 2005-2008  Robert Lipe, robertlipe+source@gpsbabel.org
    Copyright (C) 2012  Nicolas Boullis, nboullis@debian.org
    Copyright (C) 2014  Jean-Claude Repetto, gpsbabel@repetto.org

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111 USA

 */

/*
    DG-100 / DG-200 communication protocol specification:
    http:https://www.usglobalsat.com/s-176-developer-information.aspx
 */

#include "defs.h"
#include <ctype.h>

#include "gbser.h"
#include <assert.h>
#include <stdio.h>
#include <stdlib.h>

#define MYNAME "DG-100"

typedef struct {
  const char *name;
  unsigned speed;
  int has_trailing_bytes;
  int has_payload_end_seq;
  struct dg100_command *commands;
  unsigned int numcommands;
} model_t;

static const model_t* model;

static void* serial_handle;

/* maximum frame size observed so far: 1817 bytes
 *   (dg100cmd_getfileheader returning 150 entries)
 * dg100cmd_getfileheader is the only answer type of variable length,
 * answers of other types are always shorter than 1817 bytes */
#define FRAME_MAXLEN 4096

enum dg100_command_id {
  dg100cmd_getconfig     = 0xB7,
  dg100cmd_setconfig     = 0xB8,
  dg100cmd_getfileheader = 0xBB,
  dg100cmd_getfile       = 0xB5,
  dg100cmd_erase         = 0xBA,
  dg100cmd_getid         = 0xBF,
  dg100cmd_setid         = 0xC0,
  dg100cmd_gpsmouse      = 0xBC,
  dg200cmd_reset         = 0x80
};

struct dg100_command {
  int  id;
  int  sendsize;
  int  recvsize;
  int  trailing_bytes;
  const char* text;	/* Textual description for debugging */
};

struct dg100_command dg100_commands[] = {
  { dg100cmd_getfile,        2, 1024,    2, "getfile" },
  /* the getfileheader answer has variable length, -1 is a dummy value */
  { dg100cmd_getfileheader,  2,   -1,    2, "getfileheader"  },
  { dg100cmd_erase,          2,    4,    2, "erase" },
  { dg100cmd_getconfig,      0,   44,    2, "getconfig" },
  { dg100cmd_setconfig,     41,    4,    2, "setconfig"  },
  { dg100cmd_getid,          0,    8,    2, "getid" },
  { dg100cmd_setid,          8,    4,    2, "setid" },
  { dg100cmd_gpsmouse,       1,    0,    0, "gpsmouse" }
};

struct dg100_command dg200_commands[] = {
  { dg100cmd_getfile,        2, 1024,    2, "getfile" },
  /* the getfileheader answer has variable length, -1 is a dummy value */
  { dg100cmd_getfileheader,  2,   -1,    2, "getfileheader"  },
  { dg100cmd_erase,          2,    4,    2, "erase" },
  { dg100cmd_getconfig,      0,   45,    2, "getconfig" },
  { dg100cmd_setconfig,     42,    4,    2, "setconfig"  },
  { dg100cmd_getid,          0,    8,    2, "getid" },
  { dg100cmd_setid,          8,    4,    2, "setid" },
  { dg100cmd_gpsmouse,       1,    0,    0, "gpsmouse" },
  { dg200cmd_reset   ,       24,   0,    0, "reset" }
};

struct dynarray16 {
  unsigned count; /* number of elements used */
  unsigned limit; /* number of elements allocated */
  int16_t* data;
};

/* helper functions */
static struct dg100_command*
dg100_findcmd(int id) {
  unsigned int i;

  /* linear search should be OK as long as dg100_numcommands is small */
  for (i = 0; i < model->numcommands; i++) {
    if (model->commands[i].id == id) {
      return(&model->commands[i]);
    }
  }

  return NULL;
}

static void
dynarray16_init(struct dynarray16* a, unsigned limit)
{
  a->count = 0;
  a->limit = limit;
  a->data = (int16_t*) xmalloc(sizeof(a->data[0]) * a->limit);
}

static int16_t*
dynarray16_alloc(struct dynarray16* a, unsigned n)
{
  unsigned oldcount, need;
  const unsigned elements_per_chunk = 4096 / sizeof(a->data[0]);

  oldcount = a->count;
  a->count += n;

  if (a->count > a->limit) {
    need = a->count - a->limit;
    need = (need > elements_per_chunk) ? need : elements_per_chunk;
    a->limit += need;
    a->data = (int16_t*) xrealloc(a->data, sizeof(a->data[0]) * a->limit);
  }
  return(a->data + oldcount);
}

static time_t
bintime2utc(int date, int time)
{
  struct tm gpstime;

  gpstime.tm_sec   = time % 100;
  time /= 100;
  gpstime.tm_min   = time % 100;
  time /= 100;
  gpstime.tm_hour  = time;

  /*
   * GPS year: 2000+; struct tm year: 1900+
   * GPS month: 1-12, struct tm month: 0-11
   */
  gpstime.tm_year  = date % 100 + 100;
  date /= 100;
  gpstime.tm_mon   = date % 100 - 1;
  date /= 100;
  gpstime.tm_mday  = date;

  return(mkgmtime(&gpstime));
}

static void
dg100_debug(const char* hdr, int include_nl, size_t sz, unsigned char* buf)
{
  unsigned int i;

  /* Only give byte dumps for higher debug levels */
  if (global_opts.debug_level < 5) {
    return;
  }

  fprintf(stderr, "%s", hdr);

  for (i = 0; i < sz; i++)  {
    fprintf(stderr, "%02x ", buf[i]);
  }

  if (include_nl) {
    fprintf(stderr, "\n");
  }
}

static void
dg100_log(const char* fmt, ...)
{
  va_list ap;
  va_start(ap, fmt);
  if (global_opts.debug_level > 0) {
    vfprintf(stderr, fmt, ap);
  }
  va_end(ap);
}


/* TODO: check whether negative lat/lon (West/South) are handled correctly */
static float
bin2deg(int val)
{
  /* Assume that val prints in decimal digits as [-]dddmmffff
   * ddd:  degrees
   * mm:   the integer part of minutes
   * ffff: the fractional part of minutes (decimal fraction 0.ffff)
   */

  float deg;
  int deg_int, min_scaled, isneg;
  unsigned absval;

  /* avoid division of negative integers,
   * which has platform-dependent results */
  absval = abs(val);
  isneg = (val < 0);

  deg_int = absval / 1000000;      /* extract ddd */
  min_scaled = absval % 1000000;   /* extract mmffff (minutes * 10^4) */
  deg = deg_int + (double) min_scaled / (10000 * 60);

  /* restore the sign */
  deg = isneg ? -deg : deg;
  return(deg);
}

static void
process_gpsfile(uint8_t data[], route_head** track)
{
  const int recordsizes[3] = {8, 20, 32};
  int i, style, recsize;
  int lat, lon, bintime, bindate;
  Waypoint* wpt;

  /* the first record of each file is always full-sized; its style field
   * determines the format of all subsequent records in the file */
  style = be_read32(data + 28);
  if (style > 2) {
    fprintf(stderr, "unknown GPS record style %d", style);
    return;
  }
  recsize = recordsizes[style];

  for (i = 0; i <= 2048 - recsize; i += (i == 0) ? 32 : recsize) {
    float latitude;
    int manual_point = 0;

    lat = be_read32(data + i + 0);
    lon = be_read32(data + i + 4);

    /* skip invalid trackpoints (blank records) */
    if (lat == -1 && lon == -1) {
      continue;
    }

    if ((i == 0) && (be_read32(data + i + 8) & 0x80000000)) {
      /* This is the first point recorded after power-on; start a new track */
      *track = NULL;
    }

    if (*track == NULL) {
      time_t creation_time;
      char buf[1024];
      bintime = be_read32(data + i +  8) & 0x7FFFFFFF;
      bindate = be_read32(data + i + 12);
      creation_time = bintime2utc(bindate, bintime);
      strncpy(buf, model->name, sizeof(buf));
      strftime(&buf[strlen(model->name)], sizeof(buf)-strlen(model->name), " tracklog (%Y/%m/%d %H:%M:%S)",
               gmtime(&creation_time));
      *track = route_head_alloc();
      (*track)->rte_name = buf;
      (*track)->rte_desc = "GPS tracklog data";
      track_add_head(*track);
    }

    wpt = new Waypoint;
    latitude = bin2deg(lat);
    if (latitude >= 100) {
      manual_point = 1;
      latitude -= 100;
    } else if (latitude <= -100) {
      manual_point = 1;
      latitude += 100;
    }
    wpt->latitude = latitude;
    wpt->longitude = bin2deg(lon);

    if (style >= 1) {
      bintime = be_read32(data + i +  8) & 0x7FFFFFFF;
      bindate = be_read32(data + i + 12);
      wpt->SetCreationTime(bintime2utc(bindate, bintime));
      /* The device presents the speed as a fixed-point number
       * with a scaling factor of 100, in km/h.
       * The waypoint struct wants the speed as a
       * floating-point number, in m/s. */
      wpt->speed = KPH_TO_MPS(be_read32(data + i + 16) / 100.0);
      wpt->wpt_flags.speed = 1;
    }

    if (style >= 2) {
      wpt->altitude = be_read32(data + i + 20) / 10000.0;
    }

    if (manual_point) {
      waypt_add(wpt);
    } else {
      track_add_wpt(*track, wpt);
    }
  }
}

static uint16_t
dg100_checksum(uint8_t buf[], int count)
{
  uint16_t sum = 0;
  int i;

  for (i = 0; i < count; i++) {
    sum += buf[i];
  }
  sum &= (1<<15) - 1;

  return(sum);
}

/* communication functions */
static size_t
dg100_send(uint8_t cmd, const void* payload, size_t param_len)
{
  uint8_t frame[FRAME_MAXLEN];
  uint16_t checksum, payload_len;
  size_t framelen;
  int n;

  payload_len = 1 + param_len;
  /* Frame length calculation:
   * frame start sequence(2), payload length field(2), command id(1),
   * param(variable length),
   * checksum(2), frame end sequence(2) */
  framelen = 2 + 2 + 1 + param_len + 2 + 2;
  assert(framelen <= FRAME_MAXLEN);

  /* create frame head + command */
  be_write16(frame + 0, 0xA0A2);
  be_write16(frame + 2, payload_len);
  frame[4] = cmd;

  /* copy payload */
  memcpy(frame + 5, payload, param_len);

  /* create frame tail */
  checksum = dg100_checksum(frame + 4, framelen - 8);
  be_write16(frame + framelen - 4, checksum);
  be_write16(frame + framelen - 2, 0xB0B3);

  n = gbser_write(serial_handle, frame, framelen);

  if (global_opts.debug_level) {
    struct dg100_command* cmdp = dg100_findcmd(cmd);

    dg100_debug(n == 0 ? "Sent: " : "Error Sending:",
                1, framelen, frame);
    dg100_log("TX: Frame Start %02x %02x Payload_Len %04x Cmd: %s\n",
              frame[0], frame[1], payload_len, cmdp->text);
  }

  if (n == gbser_ERROR) {
    fatal("dg_100_send: write failed\n");
  }
  return (n);
}

static int
dg100_recv_byte()
{
  int result;

  /* allow for a delay of 40s;
   *  erasing the whole DG-100 memory takes about 21s */
  result = gbser_readc_wait(serial_handle, 40000);
  switch (result) {
  case gbser_ERROR:
    fatal("dg100_recv_byte(): error reading one byte\n");
  case gbser_NOTHING:
    fatal("dg100_recv_byte(): read timeout\n");
  }
  return result;
}

/* payload returns a pointer into a static buffer (which also contains the
 * framing around the data), so the caller must copy the data before calling
 * this function again */
static int
dg100_recv_frame(struct dg100_command** cmdinfo_result, uint8_t** payload)
{
  static uint8_t buf[FRAME_MAXLEN];
  uint16_t frame_start_seq, payload_len_field;
  uint16_t payload_end_seq, payload_checksum, frame_end_seq;
  uint16_t frame_head, numheaders, sum;
  uint8_t c, cmd;
  int i, param_len, frame_len;
  struct dg100_command* cmdinfo;

  /* consume input until frame head sequence 0xA0A2 was received */
  frame_head = 0;
  dg100_debug("Receiving ", 0, 0, NULL);
  do {
    c = dg100_recv_byte();
    dg100_debug("", 0, 1, &c);
    frame_head <<= 8;
    frame_head |= c;

  } while (frame_head != 0xA0A2);

  be_write16(buf + 0, frame_head);

  /* To read the remaining data, we need to know how long the frame is.
   *
   * The obvious source of this information would be the payload length
   * field, but the spec says that this field should be ignored in answers.
   * Indeed, its value differs from the actual payload length.
   *
   * We could scan for the frame end sequences,
   * but there is no guarantee that they do not appear within valid data.
   *
   * This means we can only calculate the length using information from
   * the beginning of the frame, other than the payload length.
   *
   * The solution implemented here is to derive the frame length from the
   * Command ID field, which is more of an answer ID. This is possible
   * since for each answer ID, the frame length is either constant or it
   * can be derived from the first two bytes of payload data.
   */

  /* read Payload Length, Command ID, and two further bytes */
  i = gbser_read_wait(serial_handle, &buf[2], 5, 1000);
  if (i < 5) {
    fatal("Expected to read 5 bytes, but got %d\n", i);
  }
  dg100_debug("", 0, 5, &buf[2]);

  payload_len_field = be_read16(buf + 2);
  cmd = buf[4];

  /*
   * getconfig/setconfig have the same answer ID -
   * this seems to be a firmware bug we must work around.
   * Distinguish them by the (otherwise ignored) Payload Len field,
   * which was observed as 53 for getconfig and 5 for setconfig.
   */
  if (cmd == dg100cmd_getconfig && payload_len_field <= 20) {
    cmd = dg100cmd_setconfig;
  }

  cmdinfo = dg100_findcmd(cmd);
  if (!cmdinfo) {
    /* TODO: consume data until frame end signature,
     * then report failure to the caller? */
    fatal("unknown answer ID %02x\n", cmd);
  }

  param_len = cmdinfo->recvsize;

  /*
   * the getfileheader answer has a varying param_len,
   * we need to calculate it
   */
  if (cmd == dg100cmd_getfileheader) {
    numheaders = be_read16(buf + 5);
    param_len = 2 + 2 + 12 * numheaders;
  }

  if (model->has_trailing_bytes) {
    param_len += cmdinfo->trailing_bytes;
  }

  /* Frame length calculation:
   * frame start sequence(2), payload length field(2), command id(1),
   * param(variable length),
   * payload end sequence(2 or 0), checksum(2), frame end sequence(2) */
  frame_len = 2 + 2 + 1 + param_len + ((model->has_payload_end_seq) ? 2 : 0) + 2 + 2;

  if (frame_len > FRAME_MAXLEN) {
    fatal("frame too large (frame_len=%d, FRAME_MAXLEN=%d)\n",
          frame_len, FRAME_MAXLEN);
  }

  i = gbser_read_wait(serial_handle, &buf[7], frame_len - 7, 1000);
  if (i < frame_len - 7) {
    fatal("Expected to read %d bytes, but got %d\n",
          frame_len - 7, i);
  }
  dg100_debug("", 0, frame_len - 7, &buf[7]);

  frame_start_seq   = be_read16(buf + 0);
  payload_len_field = be_read16(buf + 2);
  if (model->has_payload_end_seq) {
    payload_end_seq   = be_read16(buf + frame_len - 6);
  }
  payload_checksum  = be_read16(buf + frame_len - 4);
  frame_end_seq     = be_read16(buf + frame_len - 2);
  (void) payload_end_seq;
  (void) frame_end_seq;

  dg100_log("RX: Start %04x Len %04x Cmd: %s\n",
            frame_start_seq, payload_len_field, cmdinfo->text);

  /* calculate checksum */
  sum = dg100_checksum(buf + 4, frame_len - 8);
  if (sum != payload_checksum) {
    fatal("checksum mismatch: data sum is 0x%04x, checksum received is 0x%04x\n",
          sum, payload_checksum);
  }

  /*
   * TODO: check signatures;
   * on failure, flush input or scan for end sequence
   */

  *cmdinfo_result = cmdinfo;
  *payload = buf + 5;
  dg100_debug("\n", 0, 0, &buf[i]);
  return(param_len);
}

/* return value: number of bytes copied into buf, -1 on error */
static int
dg100_recv(uint8_t expected_id, void* buf, unsigned int len)
{
  int n;
  struct dg100_command* cmdinfo;
  uint8_t* data;
  unsigned int copysize, trailing_bytes;

  n = dg100_recv_frame(&cmdinfo, &data);

  /* check whether the received frame matches the expected answer type */
  if (cmdinfo->id != expected_id) {
    fprintf(stderr, "ERROR: answer type %02x, expecting %02x", cmdinfo->id, expected_id);
    return -1;
  }

  trailing_bytes = (model->has_trailing_bytes) ? (cmdinfo->trailing_bytes) : 0;
  copysize = n - trailing_bytes;

  /* check for buffer overflow */
  if (len < copysize) {
    fprintf(stderr, "ERROR: buffer too small, size=%d, need=%d", len, copysize);
    return -1;
  }

  memcpy(buf, data, copysize);
  return(copysize);
}

/* the number of bytes to be sent is determined by cmd,
 * count is the size of recvbuf */
static int
dg100_request(uint8_t cmd, const void* sendbuf, void* recvbuf, size_t count)
{
  struct dg100_command* cmdinfo;
  int n, i, frames, fill;
  uint8_t* buf;

  cmdinfo = dg100_findcmd(cmd);
  assert(cmdinfo != NULL);
  dg100_send(cmd, sendbuf, cmdinfo->sendsize);

  /* the number of frames the answer will comprise */
  frames = (cmd == dg100cmd_getfile) ? 2 : 1;
  /* alias pointer for easy typecasting */
  buf = (uint8_t*) recvbuf;
  fill = 0;
  for (i = 0; i < frames; i++) {
    n = dg100_recv(cmd, buf + fill, count - fill);
    if (n < 0) {
      return(-1);
    }
    fill += n;
  }
  return(fill);
}

/* higher level communication functions */
static void
dg100_getfileheaders(struct dynarray16* headers)
{
  uint8_t request[2];
  uint8_t answer[FRAME_MAXLEN];
  int seqnum;
  int16_t numheaders, nextheader, *h;
  int i, offset;

  nextheader = 0;
  do {
    /* request the next batch of headers */
    be_write16(request, nextheader);
    dg100_request(dg100cmd_getfileheader, request, answer, sizeof(answer));

    /* process the answer */
    numheaders = be_read16(answer);
    nextheader = be_read16(answer + 2);
    dg100_log("found %d headers, nextheader=%d\n",
              numheaders, nextheader);
    if (numheaders <= 0) {
      dg100_log("no further headers, aborting the loop\n");
      break;
    }

    h = dynarray16_alloc(headers, numheaders);
    for (i = 0; i < numheaders; i++) {
      offset = 4 + i * 12;
      seqnum = be_read32(answer + offset + 8);
      h[i] = seqnum;
      if (global_opts.debug_level) {
        int time   = be_read32(answer + offset) & 0x7FFFFFFF;
        int date   = be_read32(answer + offset + 4);
        time_t ti = bintime2utc(date, time);
        dg100_log("Header #%d: Seq: %d Time: %s",
                  i, seqnum, ctime(&ti));
      }
    }
  } while (nextheader != 0);
}

static void
dg100_getconfig()
{
  uint8_t answer[45];

  dg100_request(dg100cmd_getconfig, NULL, answer, sizeof(answer));
}

static void
dg100_getfile(int16_t num, route_head** track)
{
  uint8_t request[2];
  uint8_t answer[2048];

  be_write16(request, num);
  dg100_request(dg100cmd_getfile, request, answer, sizeof(answer));
  process_gpsfile(answer, track);
}

static void
dg100_getfiles()
{
  unsigned int i;
  int filenum;
  struct dynarray16 headers;
  route_head* track = NULL;

  /* maximum number of headers observed so far: 672
   * if necessary, the dynarray will grow even further */
  dynarray16_init(&headers, 1024);

  dg100_getfileheaders(&headers);

  for (i = 0; i < headers.count; i++) {
    filenum = headers.data[i];
    dg100_getfile(filenum, &track);
  }
  dg100_getconfig();       // To light on the green LED on the DG-200
}

static int
dg100_erase()
{
  uint8_t request[2] = { 0xFF, 0xFF };
  uint8_t answer[4];

  dg100_request(dg100cmd_erase, request, answer, sizeof(answer));
  if (be_read32(answer) != 1) {
    fprintf(stderr, "dg100_erase() FAILED\n");
    return(-1);
  }
  return(0);
}

/* GPSBabel integration */

static char* erase;
static char* erase_only;

static
arglist_t dg100_args[] = {
  {
    "erase", &erase, "Erase device data after download",
    "0", ARGTYPE_BOOL, ARG_NOMINMAX
  },
  {
    "erase_only", &erase_only, "Only erase device data, do not download anything",
    "0", ARGTYPE_BOOL, ARG_NOMINMAX
  },
  ARG_TERMINATOR
};

/*******************************************************************************
* %%%        global callbacks called by gpsbabel main process              %%% *
*******************************************************************************/

static void
common_rd_init(const QString& fname)
{
  if (serial_handle = gbser_init(qPrintable(fname)), NULL == serial_handle) {
    fatal(MYNAME ": Can't open port '%s'\n", qPrintable(fname));
  }
  if (gbser_set_speed(serial_handle, model->speed) != gbser_OK) {
    fatal(MYNAME ": Can't configure port '%s'\n", qPrintable(fname));
  }
  // Toss anything that came in before our speed was set, particularly
  // for the bluetooth BT-335 product.
  gbser_flush(serial_handle);
}

static void
dg100_rd_init(const QString& fname)
{
  static const model_t dg100_model = { "DG-100", 115200, 1, 1, dg100_commands, sizeof(dg100_commands) / sizeof(struct dg100_command) };
  model = &dg100_model;
  common_rd_init(fname);
}

static void
dg200_rd_init(const QString& fname)
{
  static const model_t dg200_model = { "DG-200", 230400, 0, 0, dg200_commands, sizeof(dg200_commands) / sizeof(struct dg100_command) };
  model = &dg200_model;
  common_rd_init(fname);
}

static void
dg100_rd_deinit(void)
{
  gbser_deinit(serial_handle);
  serial_handle = NULL;
}

static void
dg100_read(void)
{
  if (*erase_only == '1') {
    dg100_erase();
    return;
  }
  dg100_getfiles();
  if (*erase == '1') {
    dg100_erase();
  }
}

/**************************************************************************/

// capabilities below means: we can read tracks and waypoints

ff_vecs_t dg100_vecs = {
  ff_type_serial,
  {
    ff_cap_read			/* waypoints */,
    ff_cap_read 			/* tracks */,
    ff_cap_none 			/* routes */
  },
  dg100_rd_init,
  NULL,
  dg100_rd_deinit,
  NULL,
  dg100_read,
  NULL,
  NULL,
  dg100_args,
  CET_CHARSET_ASCII, 0			/* ascii is the expected character set */
  /* not fixed, can be changed through command line parameter */
};

ff_vecs_t dg200_vecs = {
  ff_type_serial,
  {
    ff_cap_read			/* waypoints */,
    ff_cap_read 			/* tracks */,
    ff_cap_none 			/* routes */
  },
  dg200_rd_init,
  NULL,
  dg100_rd_deinit,
  NULL,
  dg100_read,
  NULL,
  NULL,
  dg100_args,
  CET_CHARSET_ASCII, 0			/* ascii is the expected character set */
  /* not fixed, can be changed through command line parameter */
};
/**************************************************************************/