EZsdmInstaller

#!/bin/bash
#
# V9.0
#
# EZ Installer. Run from the bash command line:
#
#    curl -L https://raw.githubusercontent.com/gitbls/sdm/master/EZsdmInstaller | bash
#
# $1: Branch to install from (D:master)
# $2: Target install directory (D:/usr/local/sdm)
# ** To use either of these arguments you must download this script to your system
#    and start it from the command line:
#    e.g., bash$ EZsdmInstaller V9.0                       # Install V9.0 release to /usr/local/sdm
#          bash$ EZsdmInstaller "" /home/$(whoami)/sdm     # Install master branch to /home/$(whoami)/sdm
# $3: Source Github repo (D:gitbls/sdm)
#
# NOTE: Using this version on the master branch requires that the master branch is updated to V9.0 (NYI)
#
# At the moment requires apt-based package installs. Easy to fix, of course. It's only code...
#

function errexit() {
    echo "$1"
    exit 1
}

function askyn() {
    local ans
    echo -n "$1" '[y/n]? ' ; read $2 ans
    case "$ans" in
        y*|Y*) return 0 ;;
        *) return 1 ;;
    esac
}

function getosdistro() {
    local osdistro osversion
    if [ -f "/etc/os-release" ]
    then
        osdistro=$(grep ^ID= /etc/os-release | (IFS='='; read a b ; echo $b))
	osversion=$(grep ^VERSION_ID= /etc/os-release | (IFS='='; read a b ; echo $b))
	[ "$osversion" == "" ] && osversion=$(grep ^VERSION= /etc/os-release | (IFS='='; read a b ; echo $b))
    else
        osdistro="unknown"
	osversion="unknown"
    fi
    osdistro=${osdistro%\"} #Strip leading and trailing quotes
    osdistro=${osdistro#\"}
    osdistro=${osdistro,,}  #Lower case
    [ "$osdistro" == "raspbian" ] && osdistro="raspios"
    osversion=${osversion%\"}
    osversion=${osversion#\"}
    echo "$osdistro:$osversion"
}
#
# Check OS Distro and version
#
myscript="$0 $@"
#IFS=":" read osdistro osversion <<< $(getosdistro)
[ "$(type -p apt)" == "" ] && errexit "? apt not found; cannot install on this system"
#
# Create directories and download sdm
#
[ "$1" == "" ] && branch="master" || branch="$1"
[ "$2" != "" ] && dir="$2" || dir="/usr/local/sdm"
[ "$3" != "" ] && repo="$3" || repo="gitbls/sdm"

if [ "$SDMLAN" != "" ]
then
    src=$SDMLAN
    curl="scp"
else
    src="/$repo/raw/$branch"
    curl="curl"
fi

sudo=""
if [ -d $dir ]
then
    [ ! -w $dir ] && sudo="sudo"      # Directory exists; do we have write access?
else
    [ ! -w ${dir%/*} ] && sudo="sudo" # Directory does not exist; do we have write access to where it will be created?
fi

# Can get here without using curl so ensure curl installed
if [[ "$curl" == "curl" ]] && [[ "$(type -p curl)" == "" ]]
then
    echo "* Install curl"
    $sudo apt-get install --yes --no-install-recommends curl
fi
echo "* Make directory '$dir' and download sdm files to it"

$sudo mkdir -p $dir $dir/1piboot $dir/plugins $dir/local-plugins

dlerrors=0
for f in sdm sdm-phase0 \
	     sdm-phase1 \
	     sdm-cparse \
	     sdm-cmdsubs \
	     sdm-readparams \
	     sdm-rpcsubs \
	     sdm-firstboot \
	     sdm-cryptconfig \
	     sdmcryptfs \
	     sdm-apt-cacher \
	     sdm-apt \
	     sdm-customphase \
	     sdm-apps-example \
	     sdm-xapps-example \
	     sdm-cportal \
	     sdm-logmsg \
	     sdm-gburn \
	     sdm-make-luks-usb-key \
	     sdm-add-luks-key \
	     sdm-ssh-initramfs \
	     plugins/apps \
	     plugins/apt-addrepo \
	     plugins/apt-cacher-ng \
	     plugins/apt-file \
	     plugins/bootconfig \
	     plugins/btwifiset \
	     plugins/chrony \
	     plugins/clockfake \
	     plugins/copydir \
	     plugins/copyfile \
	     plugins/cryptroot \
	     plugins/disables \
	     plugins/dovecot-imap \
	     plugins/explore \
	     plugins/extractfs \
	     plugins/git-clone \
	     plugins/graphics \
	     plugins/hotspot \
	     plugins/imon \
	     plugins/knockd \
	     plugins/L10n \
	     plugins/logwatch \
	     plugins/lxde \
	     plugins/mkdir \
	     plugins/modattr \
	     plugins/ndm \
	     plugins/network \
	     plugins/parted \
	     plugins/piapps \
	     plugins/pistrong \
	     plugins/postfix \
	     plugins/quietness \
	     plugins/raspiconfig \
	     plugins/runatboot \
	     plugins/runscript \
	     plugins/rxapp \
	     plugins/samba \
	     plugins/serial \
	     plugins/sdm-plugin-template \
	     plugins/syncthing \
	     plugins/system \
	     plugins/trim-enable \
	     plugins/ufw \
	     plugins/user \
	     plugins/vnc \
	     plugins/wificonfig \
	     plugins/wsdd \
	     1piboot/1piboot.conf
do
    echo "Downloading '$f' to '$dir/$f'"
    if [ "$SDMLAN" == "" ]
    then
	$sudo curl --fail --silent --show-error -L $src/$f -o $dir/$f
	sts=$?
    else
	scp $SDMLAN/$f $dir/$f
	sts=$?
    fi
    if [ ! -f $dir/$f -o $sts -ne 0 ]
    then
	echo "? Error downloading '$src/$f' to $dir"
	dlerrors=$((dlerrors+1))
    fi
done
if [ "$dir" == "/usr/local/sdm" ]
then
    echo "* Create link for sdm: /usr/local/bin/sdm"
    [ -L /usr/local/bin/sdm ] && $sudo rm -f /usr/local/bin/sdm
    $sudo ln -s /usr/local/sdm/sdm /usr/local/bin/sdm
fi

$sudo chmod -R 755 $dir/*
$sudo chmod 644 $dir/{sdm-apps-example,sdm-xapps-example} $dir/1piboot/1piboot.conf
$sudo mkdir -p /etc/sdm/0piboot /etc/sdm/1piboot /etc/sdm/xpiboot /etc/sdm/assets /etc/sdm/local-assets
$sudo chmod 700 /etc/sdm
$sudo rm -f /etc/sdm/sdm-readparams
$sudo cp -a $dir/sdm-readparams /etc/sdm
if [ "$($sudo bash -c '[ -f /etc/sdm/cparams ] || echo "no"')" == "no" ]
then
    myuser=$(whoami)
    hostname=$(hostname)
    cat <<EOF | $sudo tee /etc/sdm/cparams >/dev/null
# Written by EZsdmInstaller $(date +'%Y-%m-%d %H:%M:%S')
version:"V12.6"
thishost:""
aptcache:""
aptdistupgrade:""
autologin:"0"
fbatch:"0"
b0script:""
b1script:""
bootscripts:"0"
burnplugins:""
cscript:""
csrc:""
datefmt:"%Y-%m-%d %H:%M:%S"
debugs:""
dimg:""
dimgdev:"0"
dimgdevname:""
domain:""
ecolors:"blue:gray:red"
expandroot:""
exports:""
fchroot:"0"
fdirtree:"0"
fnoexpandroot:"0"
hname:""
hostname:"$hostname"
loadlocal:""
logwidth:"192"
dgroups:"dialout,cdrom,floppy,audio,video,plugdev,users,adm,sudo,users,input,netdev,spi,i2c,gpio"
myuser:"$myuser"
nowaittimesync:"0"
os:""
pi1bootconf:""
plugindebug:"0"
poptions:""
raspiosver:""
reboot:""
fredact:"0"
regensshkeys:""
noreboot:"0"
rebootwait:"20"
redocustomize:"0"
sdmdir:"$dir"
sdmflist:"sdm sdm-phase0 sdm-phase1 sdm-cparse sdm-readparams sdm-cmdsubs sdm-firstboot sdm-apt sdm-apt-cacher sdm-cportal sdm-logmsg sdm-gburn"
showapt:"0"
src:"$dir"
swapsize:"0"
timezone:""
virtmode:"nspawn"
vqemu:""
wificountry:""
custom1:""
custom2:""
custom3:""
custom4:""
plugins:""
allplugins:""
EOF
else
    echo "* /etc/sdm/cparams exists; Not overwriting"
fi
pkgs="binfmt-support gdisk parted qemu-user-static rsync systemd-container uuid"
echo "* Ensure required packages are installed: $pkgs"
[[ $EUID -ne 0 ]] && sudo="sudo"
$sudo apt-get install --yes --no-install-recommends $pkgs

echo ""
if [ "$dir" == "/usr/local/sdm" -a "$(type -p sdm)" != "" ]
then
    echo "* Invoke sdm with 'sudo sdm'"
else
    echo "* Invoke sdm with 'sudo $dir/sdm'"
    echo "* You can make an ease-of-use link with: sudo ln -s $dir/sdm /usr/local/bin/sdm"
    echo "  so you can invoke sdm with 'sudo sdm'"
fi

echo $"
  Complete sdm documentation: https://github.com/$repo/tree/$branch/Docs
"

if [ $dlerrors -ne 0 ]
then
    echo $"%% The sdm download was not complete
$dlerrors file(s) not downloaded
This must be corrected before you can use sdm

If you need help, open an issue at https://github.com/$repo
"
fi