Skip to content

Latest commit

 

History

History
113 lines (82 loc) · 11.7 KB

Command-Details.md

File metadata and controls

113 lines (82 loc) · 11.7 KB
Raw

Command Details

sdm commands include:

  • sudo sdm --customize raspios-image.img

    Perform Phase 0 configuration, and drops you in a shell inside the image for Phase 1 customization

  • sudo sdm --burn /dev/sdX --host hostname raspios-image.img

    Burns the IMG file onto the specified SD card and sets the hostname on the card.

  • sudo sdm --burnfile customized-for-myhostname.img --host myhostname raspios-image.img

    Burns the IMG file to the specified SD Card Image and sets the hostname. The customized IMG file must be burned to an SD Card to be used.

  • sudo sdm --explore raspios-image.img

    OR

    sudo sdm --explore /dev/sdX

    Uses systemd-nspawn to enter the IMG file (first example) or SD Card (second example) container to explore and/or make manual changes to the image. When using --explore there is no access to the files in the host system.

  • sudo sdm --extend [--xmb nnn] raspios-image.img

    Extends the image by the specified size and exits. The --extend [--xmb nnn] switch can also be used in conjunction with --customize. The IMG is extended before starting customization.

  • sudo sdm --shrink raspios-image.img

    Shrinks the image to be as small as possible and exits.

  • sudo sdm --ppart raspios-image.img

    Prints the partition tables in the IMG file.

  • sudo sdm --mount raspios-image.img

    OR

    sudo sdm --mount /dev/sdX

    Mounts the IMG file (first example) or SD Card (second example) onto the running host system. This enables you to manually and easily copy files from the running host system into the IMG.

    NOTE: BE VERY CAREFUL! When you use the --mount command you're running as root with access to everything! If you copy or delete a file and neglect to prefix the file directory reference with /mnt/sdm you will modify your running system.

  • sudo sdm --info what — Display one of the databases that specify timezones, locale, keymaps, and wifi-country. The what argument can be one of time, locale, keymap, or wifi. The requested database is displayed with the less command. --info help will display the list of options.

Command switches

sdm has a broad set of command switches. These can be specified in any case (UPPER, lower, or MiXeD).

All files that you provide to sdm, whether on the command line or in arguments to a plugin, must use full paths. For instance, to use a file in your home directory, don't use file or ~/file, use /home/<mylogin>/file. Relative file paths may not work because the current directory in which any sdm function is running may change.

  • --1piboot conffile — Specify a 1piboot.conf file to use instead of the one in /usr/local/sdm/1piboot/1piboot.conf.

  • --aptcache IPaddr — Use APT caching. The argument is the IP address of the apt-cacher-ng server

  • --apt-dist-upgrade — Some RasPiOS Bullseye images have a strange software configuration, which causes apt-get upgrade to fail. This switch forces sdm to use apt-get --dist-upgrade which updates correctly. [In the 2021-10-30 set of images, the "with Desktop" versions have a set of problematic VLC modules installed.]

  • --autologin — Cause the user to autologin when the system restarts

  • --b0script script — Call the function do_b0script in script when burning. script will be called after the output has been burned, and operates in effectively a Phase 0 environment. See Burn Scripts

  • --b1script script — Like --b0script, but is called in an nspawn container. See Burn Scripts

  • --batch — Do not provide an interactive command prompt inside the nspawn container

  • --bootscripts — Directs sdm-firstboot to run the boot scripts in /usr/local/sdm/1piboot/0*-*.sh. If --bootscripts is specified when creating the sdm-enhanced IMG, every SD Card burned will run the boot scripts on First Boot. If not specified on IMG creation, it can be also be specified when burning the SD Card to run the boot scripts on that SD Card. See First Boot Scripts and Congfigurations for further details.

  • --bupdate item — Used only on --burn command. item can be plugin: Check and update plugins

    • Best to not include it always unless you know what you're doing
    • --bupdate is only honored on a burn command, and is not inspected during a customize command
    • This is very handy when you're in the process of developing a new plugin or updating an existing plugin

  • --chroot — By default sdm uses systemd-nspawn to enter the container in Phase 1/post-install phases. Some (likely older) host OSes may have issues with that. If systemd-nspawn fails with an execve error, retry the command and add --chroot.

  • --convert-root fstype — Use with --burn to create disks with either btrfs or lvm rootfs. See Disks and Partitions

  • --cscript scriptname — Specifies the path to your Custom Phase Script, which will be run as described in the Custom Phase Script section below.

  • --csrc /path/to/csrcdir — A source directory string that can be used in your Custom Phase Script. One use for this is to have a directory tree where all your customizations are kept, and pass in the directory tree to sdm with --csrc.

  • --custom[1-4] — 4 variables (custom1, custom2, custom3, and custom4) that can be used to further customize your Custom Phase Script.

  • --datefmt "fmt" — Use the specified date format instead of the default "%Y-%m-%d %H:%M:%S". See man date for format string details.

  • --ddsw "switches" — Provide switches for the dd command used with --burn. The default is "bs=16M iflag=direct". If --ddsw is specified, it replaces the default value.

  • --encrypted — Use with the --explore and --mount commands to access encrypted disks. See Disk Encryption.

  • --expand-root — Used with --burn. Expands the root partition on the SSD/SD Card after burning, and disables the default (quick) first boot that does this, since sdm has already expanded the partition

  • --extend — Used in conjunction with the --xmb switch to extend an image. If used without --customize the IMG is extended but no other action is taken. If used with --customize the IMG is extended before the IMG is customized.

  • --gpt — Directs the --burn command to set the burned disk to GPT partitions

  • --groups grouplist — Specify the groups to be added to new users created with the user plugin. The default list is: dialout,cdrom,floppy,audio,video,plugdev,users,adm,sudo,users,input,netdev,spi,i2c,gpio

  • --host hostname or --hostname hostname — Specifies the name of the host to set onto the SD Card when burning it.

  • --loadlocal wifi — Starts a WiFi Captive Portal to obtain and test the WiFi Credentials during the First Boot. See Captive Portal for details. The flashled and internet options are not supported with --loadlocal wifi.

  • --logwidth N — Set the maximum log line width before lines are split. Default is 96 characters.

  • --norestart or --noreboot — Do not restart the system after the First Boot. This is useful if you set --restart when you build the image, but want to disable the automatic restart for a particular SD Card when you burn it.

  • --nowait-timesync — Don't wait for the system time to sync in sdm FirstBoot

  • --nspawnsw "switches" — Provide additional switches for the systemd-nspawn command. See man systemd-nspawn.

  • --plugin plugin-name:"arguments" — Include the named plugin with its arguments. sdm interprets a plugin name that starts with "@" as a file containing a list of plugins to include See Plugins for complete plugin details

  • --plugin-debug — Enable additional debug printout in plugins (useful for plugin development)

  • --poptions value — Controls which functions will be performed by sdm-phase1. Possible values include:

    • noautoremove — do not do an apt autoremove
    • noupdate — do not do an apt update
    • noupgrade — do not do an apt upgrade

    Enter multiple values as a single string separated by commas. For example --poptions noupdate,noupgrade

  • --reboot n — Restart the system at the end of the First Boot after waiting an additional n seconds. The -reboot switch can be used on the command when customizing the IMG (will apply to all SD Cards) or on the --burn command (will apply only to SD cards burned with --restart set. The system will not restart until the boot process has fully completed. Waiting an additional time may be useful if your system has services that take longer to start up on the first boot. sdm waits until n seconds (n=20 for `--restart) after the graphical or multi-user target is reached.

  • --redact — See Passwords for details.

  • --redo-customize — Directs sdm to not prompt for confirmation to redo the customization on a target found to already be customized.

  • --regen-ssh-host-keys — The sdm FirstBoot process will regenerate the SSH host keys on the first system boot once the system time has been synchronized. The system will move ahead and regenerate the keys if the time has not been synchronized within 60 seconds.

  • --restart — Restart the system at the end of the First Boot. The --restart switch and --reboot are synonomous except that you cannot specify an additional restart wait with the --restart switch.

  • --runonly plugins — Only run plugins. If no device or directory specified, sdm defaults to directory '/' on the running system.

  • --showapt — Show the output from apt (Package Manager) on the terminal in Phase 1. By default, the output is not displayed on the terminal. All apt output is captured in /etc/sdm/apt.log in the IMG.

  • --sdmdir /path/to — sdm normally is in /usr/local/sdm. If you want it to be put somewhere else when you customize an image, use this switch to specify the location. To install sdm itself into a different directory, specify it as the parameter to EZsdmInstall when you first install sdm

  • --update-plugins — Typically for sdm development use only. When plugins are used during an sdm burn, they are run from the copy in the source IMG. This switch causes sdm to look for newer updates on the host system, and update the burn target before running the plugins.

  • --vncbase base — Set the base port for VNC virtual desktops; RealVNC Console service is not changed.

  • --wifi-country countryname — Specify the name of the country to use for the WiFi Country setting. See /usr/share/zoneinfo/iso3166.tab for the complete WiFi Country code list. Also see the --l10n command switch which will extract the current WiFi Country setting from /etc/wpa_supplicant/wpa_supplicant.conf or /etc/wpa_supplicant/wpa_supplicant-wlan0.conf on the system on which sdm is running.

  • --xmb n — Specify the number of MB to extend the image. The default is 2048 (MB), which is 2GB. You may need to increase this depending on the number of packages you choose to install in Phase 1. If the image isn't large enough, package installations will fail. If the image is too large, it will consume more disk space, and burning the image to an SD Card will take longer.

Customization switches that can be used with --burn

For a list of switches can be used with --burn, see Burn Scripts. When used with --burn, they affect only the output SSD/SD Card, and not the IMG file.