We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Hi G4KLX, I need your help:
Want to know if anyone have experiences build MMDVM/DMR repeater in 900MHz, using 2x XPR-4580 radios.
Problem is : the RX, TX work perfect standalone, in Simplex, but in Duplex mode, it can not open repeater.
Tip: Just ever one time open repeater, BER 0.5%, and then not open again.
Device:
the error logs as following:
D: 2024-03-08 03:17:49.820 Downlink Activate CSBK D: 2024-03-08 03:17:49.821 0000: B8 00 00 00 FF FF FF 2F DB B5 88 59 *......./...Y* M: 2024-03-08 03:17:49.821 Downlink Activate received from NG2S M: 2024-03-08 03:17:49.821 Mode set to DMR D: 2024-03-08 03:17:58.518 Downlink Activate CSBK D: 2024-03-08 03:17:58.518 0000: B8 00 00 00 FF FF FF 2F DB B5 88 59 *......./...Y* M: 2024-03-08 03:17:58.518 Downlink Activate received from NG2S D: 2024-03-08 03:17:58.816 DMR Slot 1, raw RSSI: 4, reported RSSI: -43 dBm D: 2024-03-08 03:17:58.816 Downlink Activate CSBK D: 2024-03-08 03:17:58.816 0000:
another full new logs
I: 2024-03-08 03:17:31.532 Copyright(C) 2015-2023 by Jonathan Naylor, G4KLX and others I: 2024-03-08 03:17:31.532 MMDVMHost-20240210_PS4 is starting I: 2024-03-08 03:17:31.532 Built 06:27:43 Feb 10 2024 (GitID #218a017) I: 2024-03-08 03:17:31.532 General Parameters I: 2024-03-08 03:17:31.532 Callsign: BI7JTA I: 2024-03-08 03:17:31.532 Id: 4600724 I: 2024-03-08 03:17:31.532 Duplex: yes I: 2024-03-08 03:17:31.532 Timeout: 240s I: 2024-03-08 03:17:31.532 D-Star: disabled I: 2024-03-08 03:17:31.532 DMR: enabled I: 2024-03-08 03:17:31.533 YSF: disabled I: 2024-03-08 03:17:31.533 P25: disabled I: 2024-03-08 03:17:31.533 NXDN: disabled I: 2024-03-08 03:17:31.533 M17: disabled I: 2024-03-08 03:17:31.533 POCSAG: disabled I: 2024-03-08 03:17:31.533 FM: disabled I: 2024-03-08 03:17:31.533 AX.25: disabled I: 2024-03-08 03:17:31.533 Modem Parameters I: 2024-03-08 03:17:31.533 Protocol: uart I: 2024-03-08 03:17:31.533 UART Port: /dev/ttyAMA0 I: 2024-03-08 03:17:31.533 UART Speed: 460800 I: 2024-03-08 03:17:31.533 RX Invert: yes I: 2024-03-08 03:17:31.533 TX Invert: no I: 2024-03-08 03:17:31.533 PTT Invert: no I: 2024-03-08 03:17:31.533 TX Delay: 100ms I: 2024-03-08 03:17:31.533 RX Offset: 0Hz I: 2024-03-08 03:17:31.533 TX Offset: 0Hz I: 2024-03-08 03:17:31.533 RX DC Offset: 0 I: 2024-03-08 03:17:31.533 TX DC Offset: 0 I: 2024-03-08 03:17:31.533 RF Level: 50.0% I: 2024-03-08 03:17:31.533 DMR Delay: 0 (0.0ms) I: 2024-03-08 03:17:31.533 RX Level: 50.0% I: 2024-03-08 03:17:31.533 CW Id TX Level: 50.0% I: 2024-03-08 03:17:31.533 D-Star TX Level: 50.0% I: 2024-03-08 03:17:31.533 DMR TX Level: 50.0% I: 2024-03-08 03:17:31.533 YSF TX Level: 50.0% I: 2024-03-08 03:17:31.533 P25 TX Level: 50.0% I: 2024-03-08 03:17:31.533 NXDN TX Level: 50.0% I: 2024-03-08 03:17:31.533 M17 TX Level: 50.0% I: 2024-03-08 03:17:31.533 POCSAG TX Level: 50.0% I: 2024-03-08 03:17:31.533 FM TX Level: 50.0% I: 2024-03-08 03:17:31.533 AX.25 TX Level: 50.0% I: 2024-03-08 03:17:31.533 TX Frequency: 439755000Hz (439755000Hz) I: 2024-03-08 03:17:31.533 Use COS as Lockout: no M: 2024-03-08 03:17:31.533 Opening the MMDVM I: 2024-03-08 03:17:33.544 MMDVM protocol version: 2, description: MMDVM RB_STM32_DVM(446) 20221121 12.0000 MHz GitID #bf23a94 I: 2024-03-08 03:17:33.544 CPU: ST-Micro ARM, UDID: 380038001251323238333733 I: 2024-03-08 03:17:33.544 Modes: D-Star DMR YSF P25 NXDN M17 FM POCSAG AX.25 I: 2024-03-08 03:17:33.565 Display Parameters I: 2024-03-08 03:17:33.565 Type: None W: 2024-03-08 03:17:33.565 No valid display found, disabling I: 2024-03-08 03:17:33.565 Opening network connections I: 2024-03-08 03:17:33.565 DMR Network Parameters I: 2024-03-08 03:17:33.565 Type: Gateway I: 2024-03-08 03:17:33.565 Remote Address: 127.0.0.1 I: 2024-03-08 03:17:33.565 Remote Port: 62031 I: 2024-03-08 03:17:33.565 Local Address: I: 2024-03-08 03:17:33.565 Local Port: 62032 I: 2024-03-08 03:17:33.565 Jitter: 360ms I: 2024-03-08 03:17:33.565 Slot 1: enabled I: 2024-03-08 03:17:33.565 Slot 2: enabled I: 2024-03-08 03:17:33.565 Mode Hang: 20s I: 2024-03-08 03:17:33.565 Info Parameters I: 2024-03-08 03:17:33.565 Callsign: BI7JTA I: 2024-03-08 03:17:33.565 RX Frequency: 439754999Hz I: 2024-03-08 03:17:33.565 TX Frequency: 439755000Hz I: 2024-03-08 03:17:33.565 Power: 1W M: 2024-03-08 03:17:33.565 DMR, Opening DMR Network I: 2024-03-08 03:17:33.565 Opening UDP port on 62032 I: 2024-03-08 03:17:33.565 Transparent Data I: 2024-03-08 03:17:33.565 Remote Address: 127.0.0.1 I: 2024-03-08 03:17:33.565 Remote Port: 40094 I: 2024-03-08 03:17:33.565 Local Port: 40095 I: 2024-03-08 03:17:33.565 Send Frame Type: 1 I: 2024-03-08 03:17:33.565 Opening UDP port on 40095 I: 2024-03-08 03:17:33.566 RSSI I: 2024-03-08 03:17:33.566 Mapping File: /usr/local/etc/RSSI.dat I: 2024-03-08 03:17:33.570 Loaded 14 RSSI data mapping points from /usr/local/etc/RSSI.dat I: 2024-03-08 03:17:33.570 DMR Id Lookups I: 2024-03-08 03:17:33.570 File: /usr/local/etc/DMRIds.dat I: 2024-03-08 03:17:33.570 Reload: 24 hours I: 2024-03-08 03:17:33.570 Loading ID lookup table from /usr/local/etc/DMRIds.dat I: 2024-03-08 03:17:35.773 Loaded 255228 IDs to lookup table - /usr/local/etc/DMRIds.dat I: 2024-03-08 03:17:35.773 Starting protocol handlers I: 2024-03-08 03:17:35.773 DMR RF Parameters I: 2024-03-08 03:17:35.773 Started the DMR Id lookup reload thread I: 2024-03-08 03:17:35.773 Id: 4600724 I: 2024-03-08 03:17:35.773 Color Code: 1 I: 2024-03-08 03:17:35.773 Self Only: no I: 2024-03-08 03:17:35.773 Embedded LC Only: no I: 2024-03-08 03:17:35.773 Dump Talker Alias Data: yes I: 2024-03-08 03:17:35.773 Prefixes: 0 I: 2024-03-08 03:17:35.773 Call Hang: 3s I: 2024-03-08 03:17:35.774 TX Hang: 4s I: 2024-03-08 03:17:35.774 Mode Hang: 20s I: 2024-03-08 03:17:35.774 OVCM: off I: 2024-03-08 03:17:35.774 DMR Roaming Beacons Type: off M: 2024-03-08 03:17:35.774 Mode set to Idle I: 2024-03-08 03:17:35.774 MMDVMHost-20240210_PS4 is running D: 2024-03-08 03:17:46.911 Downlink Activate CSBK D: 2024-03-08 03:17:46.911 0000: B8 00 00 00 FF FF FF 2F DB B5 88 59 *......./...Y* M: 2024-03-08 03:17:46.911 Downlink Activate received from NG2S M: 2024-03-08 03:17:46.911 Mode set to DMR D: 2024-03-08 03:17:47.211 DMR Slot 2, raw RSSI: 2, reported RSSI: -43 dBm D: 2024-03-08 03:17:47.212 Downlink Activate CSBK D: 2024-03-08 03:17:47.212 0000: B8 00 00 00 FF FF FF 2F DB B5 88 59 *......./...Y* D: 2024-03-08 03:17:52.838 Downlink Activate CSBK D: 2024-03-08 03:17:52.838 0000: B8 00 00 00 FF FF FF 2F DB B5 88 59 *......./...Y* M: 2024-03-08 03:17:52.838 Downlink Activate received from NG2S D: 2024-03-08 03:17:59.154 Downlink Activate CSBK D: 2024-03-08 03:17:59.155 0000: B8 00 00 00 FF FF FF 2F DB B5 88 59 *......./...Y* M: 2024-03-08 03:17:59.155 Downlink Activate received from NG2S D: 2024-03-08 03:18:04.442 Downlink Activate CSBK D: 2024-03-08 03:18:04.443 0000: B8 00 00 00 FF FF FF 2F DB B5 88 59 *......./...Y* M: 2024-03-08 03:18:04.443 Downlink Activate received from NG2S M: 2024-03-08 03:18:06.917 Mode set to Idle D: 2024-03-08 03:18:17.406 Downlink Activate CSBK D: 2024-03-08 03:18:17.406 0000: B8 00 00 00 FF FF FF 2F DB B5 88 59 *......./...Y* M: 2024-03-08 03:18:17.406 Downlink Activate received from NG2S M: 2024-03-08 03:18:17.406 Mode set to DMR M: 2024-03-08 03:33:46.059 Mode set to Idle D: 2024-03-08 03:36:38.637 Downlink Activate CSBK D: 2024-03-08 03:36:38.637 0000: B8 00 00 00 FF FF FF 2F DB B5 88 59 *......./...Y* M: 2024-03-08 03:36:38.637 Downlink Activate received from NG2S M: 2024-03-08 03:36:38.637 Mode set to DMR D: 2024-03-08 03:36:43.781 Downlink Activate CSBK D: 2024-03-08 03:36:43.781 0000: B8 00 00 00 FF FF FF 2F DB B5 88 59
Thank you very much!
The text was updated successfully, but these errors were encountered:
No branches or pull requests
Hi G4KLX, I need your help:
Want to know if anyone have experiences build MMDVM/DMR repeater in 900MHz, using 2x XPR-4580 radios.
Problem is : the RX, TX work perfect standalone, in Simplex, but in Duplex mode, it can not open repeater.
Tip: Just ever one time open repeater, BER 0.5%, and then not open again.
Device:
![image](https://private-user-images.githubusercontent.com/22002824/311456088-cc70dede-4d34-4d69-b508-5fa3fa397b81.png?jwt=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.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.17_ZSNXhqO0atMCHkNM2PuHf15Hl1k0DgGKQLlBIfzY)
the error logs as following:
another full new logs
Thank you very much!
The text was updated successfully, but these errors were encountered: