MQTT interface for C-Bus written in Node.js
Usage:
- Put your settings in settings.js
- Run node index.js
Detailed guides and supporting articles will be posted on my blog: https://blog.addictedtopi.com/category/project/cbus/
Updates get published on these topics:
cbus/read/#1/#2/#3/state - ON/OFF gets published to these topics if the light is turned on/off
cbus/read/#!/#2/#3/level - The level of the light gets published to these topics
Publish to these topics to control the lights. Wildcards don't work:
cbus/write/#1/#2/#3/switch - Publish ON/OFF to these topics to turn lights on/off
cbus/write/#1/#2/#3/ramp - Publish a % to ramp to that %. Optionally add a comma then a time (e.g. 50,4s or 100,2m). Also, INCREASE/DECREASE ramp by 5% up or down and ON/OFF turns on/off.
This requests an update from all lights:
cbus/write/#1/#2//getall - current values get published on the cbus/read topics
#1,#2 and #3 should be replaced by your c-bus network number, application number, and the group number.
Requesting an update on start or periodic updates can be set in the settings file.
This requests the network tree:
cbus/write/#1///gettree - result gets published as JSON on cbus/read/#1///tree
Other notes: I made this for working with OpenHAB It assumes the default cgate ports