Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP…

esp8266 wifi-serial bridge, outbound TCP, and arduino/AVR/LPC/NXP programmer

Clean-code version of the baseflight flight controller firmware

Resizable BAR for (almost) any UEFI system

GUIslice drag & drop embedded GUI in C for touchscreen TFT on Arduino, Raspberry Pi, ARM, ESP8266 / ESP32 / M5stack using Adafruit-GFX / TFT_eSPI / UTFT / SDL

MQTT client library for ESP8266

Mini Drone/Quadcopter Firmware for ESP32 and ESP32-S Series SoCs.

Complete flight control system designed from scratch. Hardware designed with KiCad.

ESP8266 Weather Station in Color using ILI9341 TFT 240x320 display

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Mega2560

Web GUI for custom Tasmota compilation

Low-Cost Motor Controller based on the VESC 6

Lipo Battery Charger with USB C Power Delivery Based on the STM32G0

Multi Sensor for RC with RP2040 - FrSky D, SmartPort, XBUS, SRXL, IBUS, SBUS, Multiplex Sensor Bus, Jeti Ex Bus, Hitec

Arduino Telemetry for the RC world

opensource implementation of the frsky protocol for multiple targets (D4R-ii, VD5M)

JBC_SolderingStation

ESP32-based quadcopter flight controller

controlling the eakins microscope camera via sockets

A DIY JBC T245 soldering iron station.

Hobby RC 2.4GHz receiver based on cc2500 and STM32, supporting FrSky 2 Way D-series protocol

The closed-loop drive is to feedback the rotation angle of the stepping motor to the control panel, compare the distance that needs to be rotated with the distance of the actual rotation, calculate…

Closed loop stepper motor controller with CANbus capabilities. This Project open source hardware and code, support platformio build and upload firmware.

Wifi version using a MMA8452 sensor and ESP01

Etna 120W DC Soldering Controller for JBC T245 Soldering Handles

The closed-loop drive is to feedback the rotation angle of the stepping motor to the control panel, compare the distance that needs to be rotated with the distance of the actual rotation, calculate…

A very complete ambient-monitoring weather-station with LCD display, external probe, Internet forecast and a web dashboard.