Skip to content
This repository has been archived by the owner on Dec 13, 2018. It is now read-only.

Latest commit

 

History

History
334 lines (264 loc) · 13 KB

SPEC.md

File metadata and controls

334 lines (264 loc) · 13 KB

Container Specification - v1

This is the standard configuration for version 1 containers. It includes namespaces, standard filesystem setup, a default Linux capability set, and information about resource reservations. It also has information about any populated environment settings for the processes running inside a container.

Along with the configuration of how a container is created the standard also discusses actions that can be performed on a container to manage and inspect information about the processes running inside.

The v1 profile is meant to be able to accommodate the majority of applications with a strong security configuration.

System Requirements and Compatibility

Minimum requirements:

  • Kernel version - 3.10 recommended 2.6.2x minimum(with backported patches)
  • Mounted cgroups with each subsystem in its own hierarchy

Namespaces

Flag Enabled
CLONE_NEWPID 1
CLONE_NEWUTS 1
CLONE_NEWIPC 1
CLONE_NEWNET 1
CLONE_NEWNS 1
CLONE_NEWUSER 1

Namespaces are created for the container via the clone syscall.

Filesystem

A root filesystem must be provided to a container for execution. The container will use this root filesystem (rootfs) to jail and spawn processes inside where the binaries and system libraries are local to that directory. Any binaries to be executed must be contained within this rootfs.

Mounts that happen inside the container are automatically cleaned up when the container exits as the mount namespace is destroyed and the kernel will unmount all the mounts that were setup within that namespace.

For a container to execute properly there are certain filesystems that are required to be mounted within the rootfs that the runtime will setup.

Path Type Flags Data
/proc proc MS_NOEXEC,MS_NOSUID,MS_NODEV
/dev tmpfs MS_NOEXEC,MS_STRICTATIME mode=755
/dev/shm tmpfs MS_NOEXEC,MS_NOSUID,MS_NODEV mode=1777,size=65536k
/dev/mqueue mqueue MS_NOEXEC,MS_NOSUID,MS_NODEV
/dev/pts devpts MS_NOEXEC,MS_NOSUID newinstance,ptmxmode=0666,mode=620,gid=5
/sys sysfs MS_NOEXEC,MS_NOSUID,MS_NODEV,MS_RDONLY

After a container's filesystems are mounted within the newly created mount namespace /dev will need to be populated with a set of device nodes. It is expected that a rootfs does not need to have any device nodes specified for /dev witin the rootfs as the container will setup the correct devices that are required for executing a container's process.

Path Mode Access
/dev/null 0666 rwm
/dev/zero 0666 rwm
/dev/full 0666 rwm
/dev/tty 0666 rwm
/dev/random 0666 rwm
/dev/urandom 0666 rwm
/dev/fuse 0666 rwm

ptmx /dev/ptmx will need to be a symlink to the host's /dev/ptmx within the container.

The use of a pseudo TTY is optional within a container and it should support both. If a pseudo is provided to the container /dev/console will need to be setup by binding the console in /dev/ after it has been populated and mounted in tmpfs.

Source Destination UID GID Mode Type
pty host path /dev/console 0 0 0600 bind

After /dev/null has been setup we check for any external links between the container's io, STDIN, STDOUT, STDERR. If the container's io is pointing to /dev/null outside the container we close and dup2 the the /dev/null that is local to the container's rootfs.

After the container has /proc mounted a few standard symlinks are setup within /dev/ for the io.

Source Destination
/proc/1/fd /dev/fd
/proc/1/fd/0 /dev/stdin
/proc/1/fd/1 /dev/stdout
/proc/1/fd/2 /dev/stderr

A pivot_root is used to change the root for the process, effectively jailing the process inside the rootfs.

put_old = mkdir(...);
pivot_root(rootfs, put_old);
chdir("/");
umount(put_old, MNT_DETACH);
rmdir(put_old);

For container's running with a rootfs inside ramfs a MS_MOVE combined with a chroot is required as pivot_root is not supported in ramfs.

mount(rootfs, "/", NULL, MS_MOVE, NULL);
chroot(".");
chdir("/");

The umask is set back to 0022 after the filesystem setup has been completed.

Resources

Cgroups are used to handle resource allocation for containers. This includes system resources like cpu, memory, and device access.

Subsystem Enabled
devices 1
memory 1
cpu 1
cpuacct 1
cpuset 1
blkio 1
perf_event 1
freezer 1
hugetlb 1

All cgroup subsystem are joined so that statistics can be collected from each of the subsystems. Freezer does not expose any stats but is joined so that containers can be paused and resumed.

The parent process of the container's init must place the init pid inside the correct cgroups before the initialization begins. This is done so that no processes or threads escape the cgroups. This sync is done via a pipe ( specified in the runtime section below ) that the container's init process will block waiting for the parent to finish setup.

Security

The standard set of Linux capabilities that are set in a container provide a good default for security and flexibility for the applications.

Capability Enabled
CAP_NET_RAW 1
CAP_NET_BIND_SERVICE 1
CAP_AUDIT_READ 1
CAP_AUDIT_WRITE 1
CAP_DAC_OVERRIDE 1
CAP_SETFCAP 1
CAP_SETPCAP 1
CAP_SETGID 1
CAP_SETUID 1
CAP_MKNOD 1
CAP_CHOWN 1
CAP_FOWNER 1
CAP_FSETID 1
CAP_KILL 1
CAP_SYS_CHROOT 1
CAP_NET_BROADCAST 0
CAP_SYS_MODULE 0
CAP_SYS_RAWIO 0
CAP_SYS_PACCT 0
CAP_SYS_ADMIN 0
CAP_SYS_NICE 0
CAP_SYS_RESOURCE 0
CAP_SYS_TIME 0
CAP_SYS_TTY_CONFIG 0
CAP_AUDIT_CONTROL 0
CAP_MAC_OVERRIDE 0
CAP_MAC_ADMIN 0
CAP_NET_ADMIN 0
CAP_SYSLOG 0
CAP_DAC_READ_SEARCH 0
CAP_LINUX_IMMUTABLE 0
CAP_IPC_LOCK 0
CAP_IPC_OWNER 0
CAP_SYS_PTRACE 0
CAP_SYS_BOOT 0
CAP_LEASE 0
CAP_WAKE_ALARM 0
CAP_BLOCK_SUSPE 0

Additional security layers like apparmor and selinux can be used with the containers. A container should support setting an apparmor profile or selinux process and mount labels if provided in the configuration.

Standard apparmor profile:

#include <tunables/global>
profile <profile_name> flags=(attach_disconnected,mediate_deleted) {
  #include <abstractions/base>
  network,
  capability,
  file,
  umount,

  deny @{PROC}/sys/fs/** wklx,
  deny @{PROC}/sysrq-trigger rwklx,
  deny @{PROC}/mem rwklx,
  deny @{PROC}/kmem rwklx,
  deny @{PROC}/sys/kernel/[^s][^h][^m]* wklx,
  deny @{PROC}/sys/kernel/*/** wklx,

  deny mount,

  deny /sys/[^f]*/** wklx,
  deny /sys/f[^s]*/** wklx,
  deny /sys/fs/[^c]*/** wklx,
  deny /sys/fs/c[^g]*/** wklx,
  deny /sys/fs/cg[^r]*/** wklx,
  deny /sys/firmware/efi/efivars/** rwklx,
  deny /sys/kernel/security/** rwklx,
}

TODO: seccomp work is being done to find a good default config

Runtime and Init Process

During container creation the parent process needs to talk to the container's init process and have a form of synchronization. This is accomplished by creating a pipe that is passed to the container's init. When the init process first spawns it will block on its side of the pipe until the parent closes its side. This allows the parent to have time to set the new process inside a cgroup hierarchy and/or write any uid/gid mappings required for user namespaces.
The pipe is passed to the init process via FD 3.

The application consuming libcontainer should be compiled statically. libcontainer does not define any init process and the arguments provided are used to exec the process inside the application. There should be no long running init within the container spec.

If a pseudo tty is provided to a container it will open and dup2 the console as the container's STDIN, STDOUT, STDERR as well as mounting the console as /dev/console.

An extra set of mounts are provided to a container and setup for use. A container's rootfs can contain some non portable files inside that can cause side effects during execution of a process. These files are usually created and populated with the container specific information via the runtime.

Extra runtime files:

  • /etc/hosts
  • /etc/resolv.conf
  • /etc/hostname
  • /etc/localtime

Defaults

There are a few defaults that can be overridden by users, but in their omission these apply to processes within a container.

Type Value
Parent Death Signal SIGKILL
UID 0
GID 0
GROUPS 0, NULL
CWD "/"
$HOME Current user's home dir or "/"
Readonly rootfs false
Pseudo TTY false

Actions

After a container is created there is a standard set of actions that can be done to the container. These actions are part of the public API for a container.

Action Description
Get processes Return all the pids for processes running inside a container
Get Stats Return resource statistics for the container as a whole
Wait Wait waits on the container's init process ( pid 1 )
Wait Process Wait on any of the container's processes returning the exit status
Destroy Kill the container's init process and remove any filesystem state
Signal Send a signal to the container's init process
Signal Process Send a signal to any of the container's processes
Pause Pause all processes inside the container
Resume Resume all processes inside the container if paused
Exec Execute a new process inside of the container ( requires setns )
Set Setup configs of the container after it's created

Execute a new process inside of a running container.

User can execute a new process inside of a running container. Any binaries to be executed must be accessible within the container's rootfs.

The started process will run inside the container's rootfs. Any changes made by the process to the container's filesystem will persist after the process finished executing.

The started process will join all the container's existing namespaces. When the container is paused, the process will also be paused and will resume when the container is unpaused. The started process will only run when the container's primary process (PID 1) is running, and will not be restarted when the container is restarted.

Planned additions

The started process will have its own cgroups nested inside the container's cgroups. This is used for process tracking and optionally resource allocation handling for the new process. Freezer cgroup is required, the rest of the cgroups are optional. The process executor must place its pid inside the correct cgroups before starting the process. This is done so that no child processes or threads can escape the cgroups.

When the process is stopped, the process executor will try (in a best-effort way) to stop all its children and remove the sub-cgroups.