Demonstrations of argdist. argdist probes functions you specify and collects parameter values into a histogram or a frequency count. This can be used to understand the distribution of values a certain parameter takes, filter and print interesting parameters without attaching a debugger, and obtain general execution statistics on various functions. For example, suppose you want to find what allocation sizes are common in your application: # ./argdist -p 2420 -c -C 'p:c:malloc(size_t size):size_t:size' [01:42:29] p:c:malloc(size_t size):size_t:size COUNT EVENT [01:42:30] p:c:malloc(size_t size):size_t:size COUNT EVENT [01:42:31] p:c:malloc(size_t size):size_t:size COUNT EVENT 1 size = 16 [01:42:32] p:c:malloc(size_t size):size_t:size COUNT EVENT 2 size = 16 [01:42:33] p:c:malloc(size_t size):size_t:size COUNT EVENT 3 size = 16 [01:42:34] p:c:malloc(size_t size):size_t:size COUNT EVENT 4 size = 16 ^C It seems that the application is allocating blocks of size 16. The COUNT column contains the number of occurrences of a particular event, and the EVENT column describes the event. In this case, the "size" parameter was probed and its value was 16, repeatedly. Now, suppose you wanted a histogram of buffer sizes passed to the write() function across the system: # ./argdist -c -H 'p:c:write(int fd, void *buf, size_t len):size_t:len' [01:45:22] p:c:write(int fd, void *buf, size_t len):size_t:len len : count distribution 0 -> 1 : 0 | | 2 -> 3 : 2 |************* | 4 -> 7 : 0 | | 8 -> 15 : 2 |************* | 16 -> 31 : 0 | | 32 -> 63 : 6 |****************************************| [01:45:23] p:c:write(int fd, void *buf, size_t len):size_t:len len : count distribution 0 -> 1 : 0 | | 2 -> 3 : 11 |*************** | 4 -> 7 : 0 | | 8 -> 15 : 4 |***** | 16 -> 31 : 0 | | 32 -> 63 : 28 |****************************************| 64 -> 127 : 12 |***************** | [01:45:24] p:c:write(int fd, void *buf, size_t len):size_t:len len : count distribution 0 -> 1 : 0 | | 2 -> 3 : 21 |**************** | 4 -> 7 : 0 | | 8 -> 15 : 6 |**** | 16 -> 31 : 0 | | 32 -> 63 : 52 |****************************************| 64 -> 127 : 26 |******************** | ^C It seems that most writes fall into three buckets: very small writes of 2-3 bytes, medium writes of 32-63 bytes, and larger writes of 64-127 bytes. But these are writes across the board -- what if you wanted to focus on writes to STDOUT? # ./argdist -c -H 'p:c:write(int fd, void *buf, size_t len):size_t:len:fd==1' [01:47:17] p:c:write(int fd, void *buf, size_t len):size_t:len:fd==1 len : count distribution 0 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 1 |****************************************| 16 -> 31 : 0 | | 32 -> 63 : 1 |****************************************| [01:47:18] p:c:write(int fd, void *buf, size_t len):size_t:len:fd==1 len : count distribution 0 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 2 |************* | 16 -> 31 : 0 | | 32 -> 63 : 3 |******************** | 64 -> 127 : 6 |****************************************| [01:47:19] p:c:write(int fd, void *buf, size_t len):size_t:len:fd==1 len : count distribution 0 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 3 |********* | 16 -> 31 : 0 | | 32 -> 63 : 5 |*************** | 64 -> 127 : 13 |****************************************| ^C The "fd==1" part is a filter that is applied to every invocation of write(). Only if the filter condition is true, the value is recorded. You can also use argdist to trace kernel functions. For example, suppose you wanted a histogram of kernel allocation (kmalloc) sizes across the system, printed twice with 3 second intervals: # ./argdist -i 3 -n 2 -H 'p::__kmalloc(size_t size):size_t:size' [01:50:00] p::__kmalloc(size_t size):size_t:size size : count distribution 0 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 6 |****************************************| [01:50:03] p::__kmalloc(size_t size):size_t:size size : count distribution 0 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 22 |****************************************| 16 -> 31 : 0 | | 32 -> 63 : 0 | | 64 -> 127 : 5 |********* | 128 -> 255 : 2 |*** | Occasionally, numeric information isn't enough and you want to capture strings. What are the strings printed by puts() across the system? # ./argdist -i 10 -n 1 -C 'p:c:puts(char *str):char*:str' [01:53:54] p:c:puts(char *str):char*:str COUNT EVENT 2 str = Press ENTER to start. It looks like the message "Press ENTER to start." was printed twice during the 10 seconds we were tracing. What about reads? You could trace gets() across the system and print the strings input by the user (note how "r" is used instead of "p" to attach a probe to the function's return): # ./argdist -i 10 -n 1 -C 'r:c:gets():char*:(char*)$retval:$retval!=0' [02:12:23] r:c:gets():char*:$retval:$retval!=0 COUNT EVENT 1 (char*)$retval = hi there 3 (char*)$retval = sasha 8 (char*)$retval = hello Similarly, we could get a histogram of the error codes returned by read(): # ./argdist -i 10 -c 1 -H 'r:c:read()' [02:15:36] r:c:read() retval : count distribution 0 -> 1 : 29 |****************************************| 2 -> 3 : 11 |*************** | 4 -> 7 : 0 | | 8 -> 15 : 3 |**** | 16 -> 31 : 2 |** | 32 -> 63 : 22 |****************************** | 64 -> 127 : 5 |****** | 128 -> 255 : 0 | | 256 -> 511 : 1 |* | 512 -> 1023 : 1 |* | 1024 -> 2047 : 0 | | 2048 -> 4095 : 2 |** | In return probes, you can also trace the latency of the function (unless it is recursive) and the parameters it had on entry. For example, we can identify which processes are performing slow synchronous filesystem reads -- say, longer than 0.1ms (100,000ns): # ./argdist -C 'r::__vfs_read():u32:$PID:$latency > 100000' [01:08:48] r::__vfs_read():u32:$PID:$latency > 100000 COUNT EVENT 1 $PID = 10457 21 $PID = 2780 [01:08:49] r::__vfs_read():u32:$PID:$latency > 100000 COUNT EVENT 1 $PID = 10457 21 $PID = 2780 ^C It looks like process 2780 performed 21 slow reads. Occasionally, entry parameter values are also interesting. For example, you might be curious how long it takes malloc() to allocate memory -- nanoseconds per byte allocated. Let's go: # ./argdist -H 'r:c:malloc(size_t size):u64:$latency/$entry(size);ns per byte' -n 1 -i 10 [01:11:13] ns per byte : count distribution 0 -> 1 : 0 | | 2 -> 3 : 4 |***************** | 4 -> 7 : 3 |************* | 8 -> 15 : 2 |******** | 16 -> 31 : 1 |**** | 32 -> 63 : 0 | | 64 -> 127 : 7 |******************************* | 128 -> 255 : 1 |**** | 256 -> 511 : 0 | | 512 -> 1023 : 1 |**** | 1024 -> 2047 : 1 |**** | 2048 -> 4095 : 9 |****************************************| 4096 -> 8191 : 1 |**** | It looks like a tri-modal distribution. Some allocations are extremely cheap, and take 2-15 nanoseconds per byte. Other allocations are slower, and take 64-127 nanoseconds per byte. And some allocations are slower still, and take multiple microseconds per byte. You could also group results by more than one field. For example, __kmalloc takes an additional flags parameter that describes how to allocate memory: # ./argdist -c -C 'p::__kmalloc(size_t size, gfp_t flags):gfp_t,size_t:flags,size' [03:42:29] p::__kmalloc(size_t size, gfp_t flags):gfp_t,size_t:flags,size COUNT EVENT 1 flags = 16, size = 152 2 flags = 131280, size = 8 7 flags = 131280, size = 16 [03:42:30] p::__kmalloc(size_t size, gfp_t flags):gfp_t,size_t:flags,size COUNT EVENT 1 flags = 16, size = 152 6 flags = 131280, size = 8 19 flags = 131280, size = 16 [03:42:31] p::__kmalloc(size_t size, gfp_t flags):gfp_t,size_t:flags,size COUNT EVENT 2 flags = 16, size = 152 10 flags = 131280, size = 8 31 flags = 131280, size = 16 [03:42:32] p::__kmalloc(size_t size, gfp_t flags):gfp_t,size_t:flags,size COUNT EVENT 2 flags = 16, size = 152 14 flags = 131280, size = 8 43 flags = 131280, size = 16 ^C The flags value must be expanded by hand, but it's still helpful to eliminate certain kinds of allocations or visually group them together. argdist also has basic support for kernel tracepoints. It is sometimes more convenient to use tracepoints because they are documented and don't vary a lot between kernel versions. For example, let's trace the net:net_dev_start_xmit tracepoint and print out the protocol field from the tracepoint structure: # argdist -C 't:net:net_dev_start_xmit():u16:args->protocol' [13:01:49] t:net:net_dev_start_xmit():u16:args->protocol COUNT EVENT 8 args->protocol = 2048 ^C Note that to discover the format of the net:net_dev_start_xmit tracepoint, you use the tplist tool (tplist -v net:net_dev_start_xmit). Occasionally, it is useful to filter certain expressions by string. This is not trivially supported by BPF, but argdist provides a STRCMP helper you can use in filter expressions. For example, to get a histogram of latencies opening a specific file, run this: # argdist -c -H 'r:c:open(char *file):u64:$latency/1000:STRCMP("test.txt",$entry(file))' [02:16:38] [02:16:39] [02:16:40] $latency/1000 : count distribution 0 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 0 | | 16 -> 31 : 2 |****************************************| [02:16:41] $latency/1000 : count distribution 0 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 1 |********** | 16 -> 31 : 4 |****************************************| [02:16:42] $latency/1000 : count distribution 0 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 1 |******** | 16 -> 31 : 5 |****************************************| [02:16:43] $latency/1000 : count distribution 0 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 1 |******** | 16 -> 31 : 5 |****************************************| Here's a final example that finds how many write() system calls are performed by each process on the system: # argdist -c -C 'p:c:write():int:$PID;write per process' -n 2 [06:47:18] write by process COUNT EVENT 3 $PID = 8889 7 $PID = 7615 7 $PID = 2480 [06:47:19] write by process COUNT EVENT 9 $PID = 8889 23 $PID = 7615 23 $PID = 2480 USAGE message: # argdist -h usage: argdist [-h] [-p PID] [-z STRING_SIZE] [-i INTERVAL] [-n COUNT] [-v] [-c] [-T TOP] [-H specifier] [-C[specifier] [-I header] Trace a function and display a summary of its parameter values. optional arguments: -h, --help show this help message and exit -p PID, --pid PID id of the process to trace (optional) -t TID, --tid TID id of the thread to trace (optional) -z STRING_SIZE, --string-size STRING_SIZE maximum string size to read from char* arguments -i INTERVAL, --interval INTERVAL output interval, in seconds (default 1 second) -d DURATION, --duration DURATION total duration of trace, in seconds -n COUNT, --number COUNT number of outputs -v, --verbose print resulting BPF program code before executing -c, --cumulative do not clear histograms and freq counts at each interval -T TOP, --top TOP number of top results to show (not applicable to histograms) -H specifier, --histogram specifier probe specifier to capture histogram of (see examples below) -C specifier, --count specifier probe specifier to capture count of (see examples below) -I header, --include header additional header files to include in the BPF program as either full path, or relative to current working directory, or relative to default kernel header search path Probe specifier syntax: {p,r,t,u}:{[library],category}:function(signature)[:type[,type...]:expr[,expr...][:filter]][#label] Where: p,r,t,u -- probe at function entry, function exit, kernel tracepoint, or USDT probe in exit probes: can use $retval, $entry(param), $latency library -- the library that contains the function (leave empty for kernel functions) category -- the category of the kernel tracepoint (e.g. net, sched) signature -- the function's parameters, as in the C header type -- the type of the expression to collect (supports multiple) expr -- the expression to collect (supports multiple) filter -- the filter that is applied to collected values label -- the label for this probe in the resulting output EXAMPLES: argdist -H 'p::__kmalloc(u64 size):u64:size' Print a histogram of allocation sizes passed to kmalloc argdist -p 1005 -C 'p:c:malloc(size_t size):size_t:size:size==16' Print a frequency count of how many times process 1005 called malloc with an allocation size of 16 bytes argdist -C 'r:c:gets():char*:$retval#snooped strings' Snoop on all strings returned by gets() argdist -H 'r::__kmalloc(size_t size):u64:$latency/$entry(size)#ns per byte' Print a histogram of nanoseconds per byte from kmalloc allocations argdist -C 'p::__kmalloc(size_t size, gfp_t flags):size_t:size:flags&GFP_ATOMIC' Print frequency count of kmalloc allocation sizes that have GFP_ATOMIC argdist -p 1005 -C 'p:c:write(int fd):int:fd' -T 5 Print frequency counts of how many times writes were issued to a particular file descriptor number, in process 1005, but only show the top 5 busiest fds argdist -p 1005 -H 'r:c:read()' Print a histogram of error codes returned by read() in process 1005 argdist -C 'r::__vfs_read():u32:$PID:$latency > 100000' Print frequency of reads by process where the latency was >0.1ms argdist -H 'r::__vfs_read(void *file, void *buf, size_t count):size_t:$entry(count):$latency > 1000000' Print a histogram of read sizes that were longer than 1ms argdist -H \ 'p:c:write(int fd, const void *buf, size_t count):size_t:count:fd==1' Print a histogram of buffer sizes passed to write() across all processes, where the file descriptor was 1 (STDOUT) argdist -C 'p:c:fork()#fork calls' Count fork() calls in libc across all processes Can also use funccount.py, which is easier and more flexible argdist -H 't:block:block_rq_complete():u32:args->nr_sector' Print histogram of number of sectors in completing block I/O requests argdist -C 't:irq:irq_handler_entry():int:args->irq' Aggregate interrupts by interrupt request (IRQ) argdist -C 'u:pthread:pthread_start():u64:arg2' -p 1337 Print frequency of function addresses used as a pthread start function, relying on the USDT pthread_start probe in process 1337 argdist -H 'p:c:sleep(u32 seconds):u32:seconds' \ -H 'p:c:nanosleep(struct timespec *req):long:req->tv_nsec' Print histograms of sleep() and nanosleep() parameter values argdist -p 2780 -z 120 \ -C 'p:c:write(int fd, char* buf, size_t len):char*:buf:fd==1' Spy on writes to STDOUT performed by process 2780, up to a string size of 120 characters argdist -I 'kernel/sched/sched.h' \ -C 'p::__account_cfs_rq_runtime(struct cfs_rq *cfs_rq):s64:cfs_rq->runtime_remaining' Trace on the cfs scheduling runqueue remaining runtime. The struct cfs_rq is defined in kernel/sched/sched.h which is in kernel source tree and not in kernel-devel package. So this command needs to run at the kernel source tree root directory so that the added header file can be found by the compiler. argdist -C 'p::do_sys_open(int dfd, const char __user *filename, int flags, umode_t mode):char*:filename:STRCMP("sample.txt", filename)' Trace open of the file "sample.txt". It should be noted that 'filename' passed to the do_sys_open is a char * user pointer. Hence parameter 'filename' should be tagged with __user for kprobes (const char __user *filename). This information distinguishes if the 'filename' should be copied from userspace to the bpf stack or from kernel space to the bpf stack.