alarm-panel-pro-interface-local-alarm.yaml

####
##
## Konnected Alarm Panel Pro (ESP32) Interface with Local Alarm
## Firmware configuration for ESPHome
##
## filename: alarm-panel-pro-interface-local-alarm.yaml
## GitHub: https://github.com/konnected-io/konnected-esphome
## Buy Konnected hardware: https://konnected.io
## Help & Support: https://help@konnected.io (support is provided for verified buyers of Konnected hardware)
##
## This firmware enables the Konnected Alarm Panel Pro plus two Interface Modules to mirror the state of a 
## traditional alarm system in Home Assistant. Leveraging ESPHome's new native Alarm Control Panel component,
## the Konnected device itself manages the alarm panel states (armed, disarmed, alarming, etc) and exposes
## individual zones to Home Assistant for use in automatoins and dashboards.
##
## Alarming logic is NOT built-in to this firmware, because we are mirroring the state of the traditional alarm
## system. Using programmable outputs on the traditional alarm panel, the Konnected panel reads the armed/disarmed
## state and alarm state from the old alarm panel, and updates accordingly.
##
## To arm/disarm the alarm, the Konnected panel actuates the relay built-in to the Interface Module to trigger an
## arm/disarm keyswitch on the traditional alarm panel.
## 
## ZONE CONFIGURATION EXAMPLE
## 
## Zone 1: Input sensor
## Zone 2: Input sensor
## Zone 3: Input sensor
## Zone 4: Input sensor
## Zone 5: Input sensor
## Zone 6: Input sensor
## Zone 7: Alarm state (0=ok; 1=alarm)
## Zone 8: Armed state (0=disarmed; 1=armed)
## Out 1 : Keyswitch relay

substitutions:
  name: alarm-panel-pro
  friendly_name: Alarm Panel Pro Interface
  project_name: konnected.pro-interface-local
  project_version: "0.1.0"
  ethernet_type: LAN8720

  sensor_debounce_time: 200ms
  keyswitch_momentary_time: 200ms
  blink_on_state: "true"

packages:
  remote_package:
    url: http:https://github.com/konnected-io/konnected-esphome
    ref: master
    refresh: 5min
    files:
  
      # Required packages:
      - packages/alarm-panel-esp32-base.yaml
      - packages/status-led.yaml      

      # Keep either the wifi.yaml or ethernet.yaml package below (not both)
      # - packages/wifi.yaml
      - packages/ethernet.yaml

      # Default input/output configuration
      - packages/alarm-panel/zone1.yaml
      - packages/alarm-panel/zone2.yaml
      - packages/alarm-panel/zone3.yaml
      - packages/alarm-panel/zone4.yaml
      - packages/alarm-panel/zone5.yaml
      - packages/alarm-panel/zone6.yaml

esphome:
  name: ${name}
  name_add_mac_suffix: true

alarm_control_panel:
  platform: template
  name: Alarm Panel
  id: acp1
  
  # Trigger the physical alarm panel to toggle armed/disarmed by pressing the keyswitch
  # whenever the virtual alarm panel changes to armed or disarmed state, and the traditional
  # panel state does not match
  on_state:
    then:
      - if:
          condition:
            or:
              - and:
                - lambda: 'return id(acp1)->get_state() == ACP_STATE_DISARMED;'
                - binary_sensor.is_on: konnected_armed_state
              - and:
                - lambda: 'return id(acp1)->get_state() == ACP_STATE_ARMED_AWAY;'
                - binary_sensor.is_off: konnected_armed_state
          then:
            - button.press:
                id: alarm_keyswitch

binary_sensor:
  
  # Monitor the alarm triggered / cleared state of the physical panel
  # and update the virtual alarm panel accordingly
  - id: konnected_alarm_state
    pin:
      number: $zone7
      mode: INPUT_PULLUP
    platform: gpio   
    filters:
      - delayed_on_off: $sensor_debounce_time
    on_state:
      - if:
          condition:
            binary_sensor.is_on: konnected_alarm_state
          then:
            lambda: 'id(acp1).publish_state(ACP_STATE_TRIGGERED);'
          else:
            lambda: 'id(acp1).publish_state(ACP_STATE_DISARMED);'
      - if:
          condition:
            lambda: return id(blink_on_state);
          then:
            - script.execute: blink_status_led

  # Monitor the alarm armed/disaremd state of the physical panel
  # and update the virtual alarm panel accordingly
  - id: konnected_armed_state
    pin:
      number: $zone8
      mode: INPUT_PULLUP
    platform: gpio   
    filters:
      - delayed_on_off: $sensor_debounce_time
    on_state:
      - if:
          condition:
            binary_sensor.is_on: konnected_armed_state
          then:
            lambda: 'id(acp1).publish_state(ACP_STATE_ARMED_AWAY);'
          else:
            lambda: 'id(acp1).publish_state(ACP_STATE_DISARMED);'
      - if:
          condition:
            lambda: return id(blink_on_state);
          then:
            - script.execute: blink_status_led

output:
  - id: alarm_keyswitch_output
    platform: gpio
    pin: $out1

button:
  - platform: output
    id: alarm_keyswitch
    output: alarm_keyswitch_output
    duration: $keyswitch_momentary_time
    internal: true

api: 
web_server:
  include_internal: true
logger:
ota: