my arduino isp is taking too long for writing code to LGT8f328P IC

[manhabc]

Hello, I'm using Uno board to programing lgt8F328P, since the previous has down, therefore I take another and this make the writing process supper long (2s vs 18s). I dont know why, do you know what has happen to my ISP
I'm using win10, arduino IDE 2.32, LGT 2.07 board
Here is the command from IDE window:

"C:\Users\Manhabc\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-size" -A "C:\Users\Manhabc\AppData\Local\Temp\arduino\sketches\7083CA3CF5ECD300664858A3D2B6EC23/Program.ino.elf"
Sketch uses 22710 bytes (76%) of program storage space. Maximum is 29696 bytes.
Global variables use 1245 bytes (60%) of dynamic memory, leaving 803 bytes for local variables. Maximum is 2048 bytes.
"C:\Users\Manhabc\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17/bin/avrdude" "-CC:\Users\Manhabc\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17/etc/avrdude.conf" -v -V -patmega328p -cstk500v1 -PCOM5 "-Uflash:w:C:\Users\Manhabc\AppData\Local\Temp\arduino\sketches\7083CA3CF5ECD300664858A3D2B6EC23/Program.ino.hex:i"

avrdude: Version 6.3-20190619
Copyright (c) 2000-2005 Brian Dean, https://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch

     System wide configuration file is "C:\Users\Manhabc\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17/etc/avrdude.conf"

     Using Port                    : COM5
     Using Programmer              : stk500v1
     AVR Part                      : ATmega328P
     Chip Erase delay              : 9000 us
     PAGEL                         : PD7
     BS2                           : PC2
     RESET disposition             : dedicated
     RETRY pulse                   : SCK
     serial program mode           : yes
     parallel program mode         : yes
     Timeout                       : 200
     StabDelay                     : 100
     CmdexeDelay                   : 25
     SyncLoops                     : 32
     ByteDelay                     : 0
     PollIndex                     : 3
     PollValue                     : 0x53
     Memory Detail                 :

                              Block Poll               Page                       Polled
       Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
       ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
       eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff
       flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
       lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
       hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
       efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
       lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
       calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
       signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

     Programmer Type : STK500
     Description     : Atmel STK500 Version 1.x firmware
     Hardware Version: 3
     Firmware Version: 5.1
     Topcard         : Unknown
     Vtarget         : 0.0 V
     Varef           : 0.0 V
     Oscillator      : Off
     SCK period      : 0.1 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.11s

avrdude: Device signature = 0x1e950f (probably m328p)
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "C:\Users\MrTrung\AppData\Local\Temp\arduino\sketches\7083CA3CF5ECD300664858A3D2B6EC23/Program.ino.hex"
avrdude: writing flash (22710 bytes):

Writing | ################################################## | 100% 18.33s

avrdude: 22710 bytes of flash written

avrdude done. Thank you.