Reads and writes data (e.g. power, mode, fan status etc.) from/to a Mitsubishi Heavy Industries (MHI) air conditioner (AC) via SPI controlled by MQTT. The AC is the SPI master and the ESP8266 is the SPI slave. The program has a draft status and your input is welcome.
You have to open the indoor unit to have access to the SPI. Opening of the indoor unit should be done by a qualified professional because faulty handling may cause leakage of water, electric shock or fire!
For use of the program you have to connect your ESP8266 (I use a LOLIN(WEMOS) D1 R2 & mini with 80 MHz) via a cable connector to your air conditioner. This has to be a split device (separated indoor and outdoor unit). I assume that all indoor units of the type SRC xx ZS-S are supported. I use the indoor unit SRK 35 ZS-S and the outdoor unit SRC 35 ZS-S.
The ESP8266 is powered from the AC via DC-DC (12V -> 5V) converter. The ESP8266 SPI signals SCL (SPI clock), MOSI (Master Out Slave In) and MISO (Master In Slave Out) are connected via a voltage level shifter 5V <-> 3.3V with the AC. Direct connection of the signals without a level shifter could damage your ESP8266! More details are described here
The program uses the MQTT client library from Nick O'Leary (knolleary). Thank you Nick - great job! Please check his GitHub page to see how to install it. Dwonload MHI-AC-Ctrl.ino and adapt ssid, password and the MQTT server data in the row MQTTclient.setServer("ds218p", 1883); Currently ArduinoOTA is used for remote upload.
In a previous version (see here) I used the Hardware-SPI of the ESP8266. But since the SPI documentation of ESP8266 is poor, I decided to switch to a Software based SPI. This Software based SPI is reliable and the performance of the ESP8266 is sufficient for this use case.
The control via MQTT is described here
This project is licensed under the MIT License - see the LICENSE.md file for details
The coding of the SPI protocol of the AC is a nightmare. Without rjdekker's MHI2MQTT I had no chance to understand the protocol! Unfortunatelly rjdekker is not longer active on GitHub. He used an Arduino plus an ESP8266 for his project.