sudo apt update
sudo apt -y install unbound stunnel4 ufw software-properties-common dns-root-data

sudo systemctl disable unbound
sudo systemctl stop unbound

curl -sSL https://install.pi-hole.net | bash

pihole -a -p

sudo snap install core; sudo snap refresh core
sudo snap install --classic certbot
sudo ln -s /snap/bin/certbot /usr/bin/certbot

sudo service lighttpd stop

sudo certbot certonly

sudo service lighttpd start

sslVersion = TLSv1.2

chroot = /var/run/stunnel4
setuid = stunnel4
setgid = stunnel4
pid = /stunnel.pid

[dns]
cert = /etc/letsencrypt/live/example.domain.com/fullchain.pem
key = /etc/letsencrypt/live/example.domain.com/privkey.pem
accept = 853
connect = 127.0.0.1:53
#TIMEOUTidle = 1
#TIMEOUTclose = 1
#TIMEOUTbusy = 1

Enabled=1

sudo systemctl enable stunnel4

sudo systemctl start stunnel4

sudo systemctl status stunnel4

sudo nano /etc/unbound/unbound.conf.d/pi-hole.conf

server:

    # The  verbosity  number, level 0 means no verbosity, only errors.
    # Level 1 gives operational information. Level  2  gives  detailed
    # operational  information. Level 3 gives query level information,
    # output per query.  Level 4 gives  algorithm  level  information.
    # Level 5 logs client identification for cache misses.  Default is
    # level 1.
    verbosity: 0
    
    interface: 127.0.0.1
    port: 5335
    do-ip4: yes
    do-udp: yes
    do-tcp: yes
    
    # May be set to yes if you have IPv6 connectivity
    do-ip6: yes

    # You want to leave this to no unless you have *native* IPv6. With 6to4 and
    # Terredo tunnels your web browser should favor IPv4 for the same reasons
    prefer-ip6: no

    # control which client ips are allowed to make (recursive) queries to this
    # server. Specify classless netblocks with /size and action.  By default
    # everything is refused, except for localhost.  Choose deny (drop message),
    # refuse (polite error reply), allow (recursive ok), allow_snoop (recursive
    # and nonrecursive ok)
    access-control: 127.0.0.0/8 allow
    #access-control: 10.8.0.0/24 allow
    #access-control: 10.16.0.0/24 allow
    #access-control: 192.168.6.0/24 allow
    #access-control: 192.168.8.0/24 allow

    # Use this only when you downloaded the list of primary root servers!
    # Read  the  root  hints from this file. Make sure to 
    # update root.hints evry 5-6 months.
    root-hints: "/usr/share/dns/root.hints"
    
    # Trust glue only if it is within the servers authority
    harden-glue: yes
    
    # Ignore very large queries.
    harden-large-queries: yes
    
    # Require DNSSEC data for trust-anchored zones, if such data is absent, the zone becomes BOGUS
    # If you want to disable DNSSEC, set harden-dnssec stripped: no
    harden-dnssec-stripped: yes
    
    # Number of bytes size to advertise as the EDNS reassembly buffer
    # size. This is the value put into  datagrams over UDP towards
    # peers. The actual buffer size is determined by msg-buffer-size
    # (both for TCP and UDP).
    edns-buffer-size: 1232
    
    # Rotates RRSet order in response (the pseudo-random 
    # number is taken from Ensure privacy of local IP 
    # ranges the query ID, for speed and thread safety).  
    # private-address: 192.168.0.0/16
    rrset-roundrobin: yes
    
    # Time to live minimum for RRsets and messages in the cache. If the minimum
    # kicks in, the data is cached for longer than the domain owner intended,
    # and thus less queries are made to look up the data. Zero makes sure the
    # data in the cache is as the domain owner intended, higher values,
    # especially more than an hour or so, can lead to trouble as the data in
    # the cache does not match up with the actual data anymore
    cache-min-ttl: 300
    cache-max-ttl: 86400
    
    # Have unbound attempt to serve old responses from cache with a TTL of 0 in
    # the response without waiting for the actual resolution to finish. The
    # actual resolution answer ends up in the cache later on. 
    serve-expired: yes
    
    # Harden against algorithm downgrade when multiple algorithms are
    # advertised in the DS record.
    harden-algo-downgrade: yes
    
    # Ignore very small EDNS buffer sizes from queries.
    harden-short-bufsize: yes
    
    # Refuse id.server and hostname.bind queries
    hide-identity: yes
    
    # Report this identity rather than the hostname of the server.
    identity: "Server"
    
    # Refuse version.server and version.bind queries
    hide-version: yes
    
    # Prevent the unbound server from forking into the background as a daemon
    do-daemonize: no
    
    # Number  of  bytes size of the aggressive negative cache.
    neg-cache-size: 4M
    
    # Send minimum amount of information to upstream servers to enhance privacy
    qname-minimisation: yes
    
    # Deny queries of type ANY with an empty response.
    # Works only on version 1.8 and above
    deny-any: yes

    # Do no insert authority/additional sections into response messages when
    # those sections are not required. This reduces response size
    # significantly, and may avoid TCP fallback for some responses. This may
    # cause a slight speedup
    minimal-responses: yes
    
    # Perform prefetching of close to expired message cache entries
    # This only applies to domains that have been frequently queried
    # This flag updates the cached domains
    prefetch: yes
    
    # Fetch the DNSKEYs earlier in the validation process, when a DS record is
    # encountered. This lowers the latency of requests at the expense of little
    # more CPU usage.
    prefetch-key: yes
    
    # One thread should be sufficient, can be increased on beefy machines. In reality for 
    # most users running on small networks or on a single machine, it should be unnecessary
    # to seek performance enhancement by increasing num-threads above 1.
    num-threads: 1

    # more cache memory. rrset-cache-size should twice what msg-cache-size is.
    msg-cache-size: 50m
    rrset-cache-size: 100m
   
    # Faster UDP with multithreading (only on Linux).
    so-reuseport: yes
    
    # Ensure kernel buffer is large enough to not lose messages in traffix spikes
    so-rcvbuf: 4m
    so-sndbuf: 4m
    
    # Set the total number of unwanted replies to keep track of in every thread.
    # When it reaches the threshold, a defensive action of clearing the rrset
    # and message caches is taken, hopefully flushing away any poison.
    # Unbound suggests a value of 10 million.
    unwanted-reply-threshold: 100000
    
    # Minimize logs
    # Do not print one line per query to the log
    log-queries: no
    # Do not print one line per reply to the log
    log-replies: no
    # Do not print log lines that say why queries return SERVFAIL to clients
    log-servfail: no
    # Do not print log lines to inform about local zone actions
    log-local-actions: no
    # If no logfile is specified, syslog is used
    logfile: "/var/log/unbound/unbound.log"
    
    # Ensure privacy of local IP ranges
    private-address: 192.168.0.0/16
    private-address: 169.254.0.0/16
    private-address: 172.16.0.0/12
    private-address: 10.0.0.0/8
    private-address: fd00::/8
    private-address: fe80::/10

    # Allow the domain (and its subdomains) to contain private addresses.
    # local-data statements are allowed to contain private addresses too.
    #private-domain: "localnetwork.local"


    # locally served zones can be configured for the machines on the LAN.
    #local-zone: "localnetwork.local" static

unbound-checkconf /etc/unbound/unbound.conf.d/pi-hole.conf

sudo systemctl enable unbound
sudo systemctl start unbound

sudo systemctl status unbound

dig sigfail.verteiltesysteme.net @127.0.0.1 -p 5335
dig sigok.verteiltesysteme.net @127.0.0.1 -p 5335

sudo apt install nginx
sudo nano /etc/nginx/sites-available/pihole-redirect

server {
  listen 444 ssl;
  server_name example.domain.com;

 #SSL
  ssl_certificate /etc/letsencrypt/live/example.domain.com/fullchain.pem;
  ssl_certificate_key /etc/letsencrypt/live/example.domain.com/privkey.pem;

  # Deny access to root
  location / {
      autoindex off;
      deny all;
  }

   location /admin {
   rewrite /(.*) /$1 break;
   proxy_pass http:https://127.0.0.1:80/admin/;
   proxy_set_header Host $host;
   proxy_set_header X-Real-IP $remote_addr;
   proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
   proxy_read_timeout 90;
  }
}

sudo rm -rf /etc/nginx/sites-enabled/*
sudo ln -s /etc/nginx/sites-available/pihole-redirect /etc/nginx/sites-enabled/pihole-redirect
sudo service nginx restart