[HW Accel Support]: Intel N100 cannot configure properly, high CPU load #11009
Replies: 5 comments 23 replies
-
|
You should be using You also should not be running CPU detectors, you should be using openvino https://docs.frigate.video/configuration/object_detectors#openvino-detector |
Beta Was this translation helpful? Give feedback.
-
|
are you familar with https://tteck.github.io/Proxmox/ ? I'm using his script to install the Docker LXC on my N100 system. Maybe that script is leaving something out that the n100 needs? |
Beta Was this translation helpful? Give feedback.
-
|
I am not familiar with that at all and only familiar by proxy with proxmox in general from helping people |
Beta Was this translation helpful? Give feedback.
-
|
gotcha and nothing looks wrong with my config either? |
Beta Was this translation helpful? Give feedback.
-
|
FWIW , this is the script https://github.com/tteck/Proxmox/blob/main/install/frigate-install.sh |
Beta Was this translation helpful? Give feedback.
-
|
no, like I said this will be an issue outside of frigate config itself. I notice the script installs |
Beta Was this translation helpful? Give feedback.
-
|
I will check the cpu load without object detect and then try to use openvino, please wait to mark the answer |
Beta Was this translation helpful? Give feedback.
-
|
I have disabled the detect part, still 160% cpu: `logger: mqtt: ffmpeg: database: record: go2rtc: cameras: rtmp: |
Beta Was this translation helpful? Give feedback.
-
|
Your hwaccel args are still wrong. You should have |
Beta Was this translation helpful? Give feedback.
-
|
nothing changed load is better bur still high, and GPU error |
Beta Was this translation helpful? Give feedback.
-
|
you didn't disable object detection, it is using a lot of cpu |
Beta Was this translation helpful? Give feedback.
-
|
I feel very stupid, can you point me at the line? :D |
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
|
now the CPU load is fine. |
Beta Was this translation helpful? Give feedback.
-
|
if you are not going to use object detection then yes |
Beta Was this translation helpful? Give feedback.
-
|
I will try with openvino as you suggested |
Beta Was this translation helpful? Give feedback.
-
|
thank you for your help @NickM-27 |
Beta Was this translation helpful? Give feedback.
-
Describe the problem you are having
I'm having issue running Frigate with 2 cameras, very high CPU load, I cannot see GPU stats,
Version
0.13.2
Frigate config file
docker-compose file or Docker CLI command
Relevant log output
FFprobe output from your camera
VIALETTO [{"return_code":0,"stderr":"","stdout":{"programs":[],"streams":[{"avg_frame_rate":"20/1","codec_long_name":"H.264/AVC/MPEG-4AVC/MPEG-4part10","height":1920,"width":2560},{"avg_frame_rate":"0/0","codec_long_name":"AAC(AdvancedAudioCoding)"}]}},{"return_code":0,"stderr":"","stdout":{"programs":[],"streams":[{"avg_frame_rate":"10/1","codec_long_name":"H.264/AVC/MPEG-4AVC/MPEG-4part10","height":480,"width":640},{"avg_frame_rate":"0/0","codec_long_name":"AAC(AdvancedAudioCoding)"}]}}] GIARDINO [{"return_code":0,"stderr":"","stdout":{"programs":[],"streams":[{"avg_frame_rate":"15/1","codec_long_name":"H.264/AVC/MPEG-4AVC/MPEG-4part10","height":1080,"width":1920},{"avg_frame_rate":"0/0","codec_long_name":"AAC(AdvancedAudioCoding)"}]}}]Operating system
Proxmox
Install method
Docker Compose
Network connection
Wired
Camera make and model
reolink and ezviz
Any other information that may be helpful
Beta Was this translation helpful? Give feedback.
All reactions