Hardinfo2 is based on hardinfo, which has not been released >10 years. Hardinfo2 is the reboot that was needed.
Hardinfo2 offers System Information and Benchmark for Linux Systems. It is able to obtain information from both hardware and basic software. It can benchmark your system and compare to other machines online.
Features include:
- Report generation (in either HTML or plain text)
- Online Benchmarking - compare your machine against other machines
- Capabilities: Hardinfo2 currently detects most software and hardware detected by the OS.
- Features: Online database for exchanging benchmark results.
- Development: Currently done by community, hwspeedy maintains
Server code can be found here: https://github.com/hardinfo2/server
- GTK3 >=3.00 or GTK2+ >=2.20 - (GTK2+ DEPRECATED: cmake -DHARDINFO2_GTK3=0 ..)
- GLib >=2.24
- Zlib
- glib JSON
- Libsoup3 >=3.00 or Libsoup24>=2.42 (LS24: cmake -DHARDINFO2_LIBSOUP3=0 ..)
Debian/Ubuntu/Mint/PopOS
- sudo apt install git cmake build-essential gettext curl
- sudo apt install libjson-glib-dev zlib1g-dev libsoup2.4-dev libgtk-3-dev libglib2.0-dev
- sudo apt install libsoup-3.0-dev (might fail if not available on distro - OK)
- git clone https://github.com/hardinfo2/hardinfo2
- cd hardinfo2
- ./tools/git_latest_release.sh (Switch to latest stable release, tools/git_unstable_master.sh for developers)
- mkdir build
- cd build
- cmake ..
- make package -j (Creates package so you do not polute your distro and it can be updated by distro releases)
- sudo apt install ./hardinfo2_* (Use reinstall instead of install if already inst.)
- sudo apt install lm-sensors sysbench lsscsi mesa-utils dmidecode udisks2 xdg-utils iperf3 fwupd
- hardinfo2
Fedore/Centos/RedHat/Rocky/Alma/Oracle
- NOTE: Centos 7 needs epel-release and cmake3 instead of cmake - use cmake3 instead of cmake
- sudo yum install epel-release (only CentOS 7)
- sudo yum install git cmake gcc gcc-c++ gettext rpmdevtools curl
- sudo yum install json-glib-devel zlib-devel libsoup-devel gtk3-devel
- sudo yum install libsoup3-devel (might fail if not available on distro - OK)
- git clone https://github.com/hardinfo2/hardinfo2
- cd hardinfo2
- ./tools/git_latest_release.sh (Switch to latest stable release, tools/git_unstable_master.sh for developers)
- mkdir build
- cd build
- cmake ..
- make package -j (Creates package so you do not polute your distro and it can be updated by distro releases)
- sudo yum install ./hardinfo2-* (Use reinstall instead of install if already inst.)
- sudo yum install lm_sensors sysbench lsscsi glx-utils dmidecode udisks2 xdg-utils iperf3 fwupd
- hardinfo2
openSUSE: use zypper instead of yum, zypper --no-gpg-checks install ./hardinfo2-*
ArchLinux/Garuda/Manjaro - AUR Package
- git clone https://aur.archlinux.org/hardinfo2 (hardinfo2-git for unstable master for developers)
- cd hardinfo2
- makepkg -cis
- hardinfo2
Most hardware is detected automatically by Hardinfo2, but some might need manual set up.
Package installs these
- sysbench: is needed to run standard sysbench benchmarks.
- udisks2: is needed to provide NVME++ informations.
- dmi-decode: is needed to provide DMI informations.
- mesa-utils: is needed to provide opengl and run standard sysbench benchmarks.
- lsscsi: gives information about hard drives.
- lm-sensors: is needed to provide sensors values.
- xdg-utils: xdg_open is used to open your browser for bugs, homepage & links.
- iperf3: iperf3 is used to benchmark internal network speed.
- fwupd: fwupd is used to read and display information about firmware in system.
User can install/setup these depending on hardware
- eeprom module: To display SPD info about your currently installed DIMMs memory.
Load with
modprobe eeprom/at24/ee1004
and refresh the module screen. - hddtemp: To obtain the hard disk drive temperature, be sure to run hddtemp in daemon mode, using the default port.
- apcaccess: apcaccess is used for battery information.
- pciutils/usbutils: is only used on old kernels without sysfs.
The Project License has been changed in 2024 from GPL2 to GPL2 or later
Because we use LGPL2.1+ and GPL3+ code. To future proof the project, lpereira and other developers have agreed to change license of source code also to GPL2+. 530 707.
It is all about open source and creating together - Read more about GPL license here: https://www.gnu.org/licenses/gpl-faq.html#AllCompatibility
When using the Synchronize feature in Hardinfo2, some information may be stored indefinitely in our servers.
This information is completely anonymous, and is comprised solely from the machine configuration (e.g. CPU manufacturer and model, number of cores, maximum frequency of cores, GPU manufacturer and model, etc.), version of benchmarking tools used, etc. You can opt out by unticking the "Send benchmark results" entry in the Synchronize window.
Both the Hardinfo2 client and its server components are open source GPL2 or Later and can be audited.