config.example.yml

web_port: 5000

mqtt:
  host: mqtt.server.com
  topic_prefix: frigate
  # client_id: frigate # Optional -- set to override default client id of 'frigate' if running multiple instances
  # user: username # Optional
  #################
  ## Environment variables that begin with 'FRIGATE_' may be referenced in {}.
  ##   password: '{FRIGATE_MQTT_PASSWORD}'
  #################
  # password: password # Optional

#################
# Default ffmpeg args. Optional and can be overwritten per camera.
# Should work with most RTSP cameras that send h264 video
# Built from the properties below with:
# "ffmpeg" + global_args + input_args + "-i" + input + output_args
#################
# ffmpeg:
#   global_args:
#     - -hide_banner
#     - -loglevel
#     - panic
#   hwaccel_args: []
#   input_args:
#     - -avoid_negative_ts
#     - make_zero
#     - -fflags
#     - nobuffer
#     - -flags
#     - low_delay
#     - -strict
#     - experimental
#     - -fflags
#     - +genpts+discardcorrupt
#     - -vsync
#     - drop
#     - -rtsp_transport
#     - tcp
#     - -stimeout
#     - '5000000'
#     - -use_wallclock_as_timestamps
#     - '1'
#   output_args:
#     - -f
#     - rawvideo
#     - -pix_fmt
#     - rgb24

####################
# Global object configuration. Applies to all cameras
# unless overridden at the camera levels.
# Keys must be valid labels. By default, the model uses coco (https://dl.google.com/coral/canned_models/coco_labels.txt).
# All labels from the model are reported over MQTT. These values are used to filter out false positives.
# min_area (optional): minimum width*height of the bounding box for the detected person
# max_area (optional): maximum width*height of the bounding box for the detected person
# threshold (optional): The minimum decimal percentage (50% hit = 0.5) for the confidence from tensorflow
####################
objects:
  track:
    - person
    - car
    - truck
  filters:
    person:
      min_area: 5000
      max_area: 100000
      threshold: 0.5

cameras:
  back:
    ffmpeg:
      ################
      # Source passed to ffmpeg after the -i parameter. Supports anything compatible with OpenCV and FFmpeg.
      # Environment variables that begin with 'FRIGATE_' may be referenced in {}
      ################
      input: rtsp:https://viewer:{FRIGATE_RTSP_PASSWORD}@10.0.10.10:554/cam/realmonitor?channel=1&subtype=2
      #################
      # These values will override default values for just this camera
      #################
      # global_args: []
      # hwaccel_args: []
      # input_args: []
      # output_args: []
    
    ################
    ## Optionally specify the resolution of the video feed. Frigate will try to auto detect if not specified
    ################
    # height: 1280
    # width: 720

    ################
    ## Optional mask. Must be the same aspect ratio as your video feed.
    ## 
    ## The mask works by looking at the bottom center of the bounding box for the detected
    ## person in the image. If that pixel in the mask is a black pixel, it ignores it as a
    ## false positive. In my mask, the grass and driveway visible from my backdoor camera 
    ## are white. The garage doors, sky, and trees (anywhere it would be impossible for a 
    ## person to stand) are black.
    ## 
    ## Masked areas are also ignored for motion detection.
    ################
    # mask: back-mask.bmp

    ################
    # Allows you to limit the framerate within frigate for cameras that do not support
    # custom framerates. A value of 1 tells frigate to look at every frame, 2 every 2nd frame, 
    # 3 every 3rd frame, etc.
    ################
    take_frame: 1

    ################
    # The expected framerate for the camera. Frigate will try and ensure it maintains this framerate
    # by dropping frames as necessary. Setting this lower than the actual framerate will allow frigate
    # to process every frame at the expense of realtime processing.
    ################
    fps: 5

    ################
    # Configuration for the snapshots in the debug view and mqtt
    ################
    snapshots:
      show_timestamp: True

    ################
    # Camera level object config. This config is merged with the global config above.
    ################
    objects:
      track:
        - person
      filters:
        person:
          min_area: 5000
          max_area: 100000
          threshold: 0.5