Adds a 20cm extra clearance for umbilicals. Reuses the top plate.
Theese are some big pieces to print from ABS:
- the beams are 0.5% longer and have bigger screw holes and support 0.5-1.5% shrinkage
- add mouse ears or there is high chance the beams will peel off
It just sits on top of the frame with alignment pins dropping down into the extrusion slots
- ~600g of filament
- 4x 200x477 acrylic plates, 3mm thickness
- 1mm sponge tape
- some M3 screws and heat set inserts
Of an older version.
