A 3D Printed tool used for better and more consistant Switch Spring Lubing.
Concept and Design By: Garret G. - a.k.a. TheRoyalSweatshirt - a.k.a. The_Royal
-
Maximum Capacity is x100 Standard MX/Kaihl/ALPS Springs
-
Max Size for Full Assembly is 90 x 90 x 29mm
-
Main Body Size: 90 x 90 x 26mm
-
Top Cover Size: 90 x 90 x 6.5mm
- Resolution: Min. .15mm
- Infill: Min. 15% - ( Cubic )
- Supports: NONE - ( Parts Are Set in the Recommended Orientation )
*Tip: For Clean Print of Top Cover, Print Text-Side Down and on 1-2mm Raft Support
-
A Model is included within the Repo that, if printed in a flexible filament such as TPU or Ninjaflex can be used as a gasket insert to prevent any sort of leaking when shaking what so ever.
-
*This part is untested so use at own discretion.
- I’m always down for a nice coffee, beer, or cup of tea.
- Click my Buymeacoffee link below if you wanted to make a small tip donation <3
- Even just these little donation are so, very much, appreciated. These really Help me to keep these little projects going and to keep them open source for you guys.