-
-
Notifications
You must be signed in to change notification settings - Fork 758
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Color scheme display wrong max. value #5049
Comments
Orca bot: this issue is stale because it has been open for 90 days with no activity. |
Orca bot: This issue was closed because it has been inactive for 7 days since being marked as stale. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Is there an existing issue for this problem?
OrcaSlicer Version
v2.0.0
Operating System (OS)
Windows
OS Version
Windows 10
Additional system information
Not interesting for this problem
Printer
my own build
How to reproduce
Actual results
I used adaptive layer height and after slicing the colour scheme layer height was 0.39 mm, while the printer was set to 0.32 mm (recommended maximum nozzle height of 0.4 mm)
Looking through the layers, I found a layer at the bottom of the object that was marked with the same colour as 0.39 mm.
However, when I adjusted the adaptive layer by scanning the vertical bar, I found no layer larger than 0.32 mm.
So only the layer height color scheme is incorrectly marking the layers.
Expected results
The color scheme layer height min. and max. value should match the printer---> extruder---->layer height limits
values.
Project file & Debug log uploads
Not interesting for this problem
Checklist of files to include
Anything else?
No response
The text was updated successfully, but these errors were encountered: