Skip to content

Latest commit

 

History

History
113 lines (83 loc) · 6.51 KB

README.md

File metadata and controls

113 lines (83 loc) · 6.51 KB
Raw

Ux_Device_Video application description

This application provides an example of Azure RTOS USBX stack usage on NUCLEO-H723ZG board, it shows how to develop USB Device Video based application.

The application is designed to emulate a USB video device, the code provides all required device descriptors framework and associated class descriptor report to build a compliant USB video device.

At the beginning ThreadX calls the entry function tx_application_define(), at this stage, all USBx resources are initialized, the video class driver is registered and the application creates one thread:

  • app_ux_device_thread_entry (Prio : 10; PreemptionPrio : 10) used to initialize USB_OTG HAL PCD driver and start the device.

Expected success behavior

When plugged to PC host, the NUCLEO-H723ZG must be properly enumerated as a USB video device. During the enumeration phase, device provides host with the requested descriptors (device, configuration, string). Those descriptors are used by host driver to identify the device capabilities.

Once the NUCLEO-H723ZG USB device successfully completed the enumeration phase: 1- Open a camera application (Camera, ContaCam or VLC media player) then open the capture device and play the video on the PC host. 2- To test other stream change number of included file "ux_device_video.c":

- stream1 FORMAT : MJPEG and Width = 320, Height = 236.
- stream2 FORMAT : UNCOMPRESSED and Width = 176, Height = 144 and the descriptor shall be updated.

Error behaviors

Host PC shows that USB device does not operate as designed (video device enumeration failed).

Assumptions if any

User is familiar with USB 2.0 "Universal Serial BUS" specification and video class specification.

Known limitations

None.

Notes

  1. Some code parts can be executed in the ITCM-RAM (64 KB up to 256kB) which decreases critical task execution time, compared to code execution from Flash memory. This feature can be activated using '#pragma location = ".itcmram"' to be placed above function declaration, or using the toolchain GUI (file options) to execute a whole source file in the ITCM-RAM.
  2. If the application is using the DTCM/ITCM memories (@0x20000000/ 0x0000000: not cacheable and only accessible by the Cortex M7 and the MDMA), no need for cache maintenance when the Cortex M7 and the MDMA access these RAMs. If the application needs to use DMA (or other masters) based access or requires more RAM, then the user has to:
    • Use a non TCM SRAM. (example : D1 AXI-SRAM @ 0x24000000).
    • Add a cache maintenance mechanism to ensure the cache coherence between CPU and other masters (DMAs,DMA2D,LTDC,MDMA).
    • The addresses and the size of cacheable buffers (shared between CPU and other masters) must be properly defined to be aligned to L1-CACHE line size (32 bytes).
  3. It is recommended to enable the cache and maintain its coherence:
    • Depending on the use case it is also possible to configure the cache attributes using the MPU.
    • Please refer to the AN4838 "Managing memory protection unit (MPU) in STM32 MCUs".
    • Please refer to the AN4839 "Level 1 cache on STM32F7 Series and STM32H7 Series"

ThreadX usage hints

  • ThreadX uses the Systick as time base, thus it is mandatory that the HAL uses a separate time base through the TIM IPs.

  • ThreadX is configured with 100 ticks/sec by default, this should be taken into account when using delays or timeouts at application. It is always possible to reconfigure it, by updating the "TX_TIMER_TICKS_PER_SECOND" define in the "tx_user.h" file. The update should be reflected in "tx_initialize_low_level.S" file too.

  • ThreadX is disabling all interrupts during kernel start-up to avoid any unexpected behavior, therefore all system related calls (HAL, BSP) should be done either at the beginning of the application or inside the thread entry functions.

  • ThreadX offers the "tx_application_define()" function, that is automatically called by the tx_kernel_enter() API. It is highly recommended to use it to create all applications ThreadX related resources (threads, semaphores, memory pools...) but it should not in any way contain a system API call (HAL or BSP).

  • Using dynamic memory allocation requires to apply some changes to the linker file. ThreadX needs to pass a pointer to the first free memory location in RAM to the tx_application_define() function, using the "first_unused_memory" argument. This requires changes in the linker files to expose this memory location.

    • For EWARM add the following section into the .icf file:
    place in RAM_region    { last section FREE_MEM };
    • For MDK-ARM:
    either define the RW_IRAM1 region in the ".sct" file
or modify the line below in "tx_initialize_low_level.S to match the memory region being used
    LDR r1, =|Image$$RW_IRAM1$$ZI$$Limit|
    • For STM32CubeIDE add the following section into the .ld file:
    ._threadx_heap :
  {
     . = ALIGN(8);
     __RAM_segment_used_end__ = .;
     . = . + 64K;
     . = ALIGN(8);
   } >RAM_D1 AT> RAM_D1

    The simplest way to provide memory for ThreadX is to define a new section, see ._threadx_heap above.
In the example above the ThreadX heap size is set to 64KBytes.
The ._threadx_heap must be located between the .bss and the ._user_heap_stack sections in the linker script.
Caution: Make sure that ThreadX does not need more than the provided heap memory (64KBytes in this example).
Read more in STM32CubeIDE User Guide, chapter: "Linker script".
    • The "tx_initialize_low_level.S" should be also modified to enable the "USE_DYNAMIC_MEMORY_ALLOCATION" flag.

USBX usage hints

  • The DTCM (0x20000000) memory region should not be used by application in case USB DMA is enabled
  • Should make sure to configure the USB pool memory region with attribute "Non-Cacheable" to ensure coherency between CPU and USB DMA

Keywords

RTOS, ThreadX, USBXDevice, USB_OTG, Full Speed, Video.

Hardware and Software environment

  • This example runs on STM32H723xx devices.
  • This example has been tested with STMicroelectronics NUCLEO-H723ZG boards revision MB1364-H723ZG-E01 and can be easily tailored to any other supported device and development board.

How to use it ?

In order to make the program work, you must do the following :

  • Open your preferred toolchain
  • Rebuild all files and load your image into target memory
  • Run the application