Here, we describe a simplified version of the analysis that is at the core of our paper (https://www.nature.com/articles/s41591-019-0729-3). With the help of one example, we show how a dramatic reduction in RNA sequencing depth has little to no impact on the performance of machine learning-based linear Cox models that predict disease outcome based on tumor gene expression.
Since this analysis is peformed in R, if you have not installed it yet, you can follow the intructions in https://cran.r-project.org/.
In case R is installed, it needs to be version 3.6.1 or higher for this example to work. The following code can help determine if R needs to be updated.
if(sessionInfo()$R.version$version.string < '3.6.1'){
stop(paste0("This will not run for R versions older than 3.6.1. ",
"Your version is: ",
sessionInfo()$R.version$version.string,
". Please, update R and try again."))
} else {
paste0("Your version is: ",
sessionInfo()$R.version$version.string,
". This R version should be able to handle this example")
}
In this example, we will use adrenocortical carcinoma (ACC) to demonstrate how a drastic reduction in RNA-seq depth still gives enough information to predict the relative risk of adverse outcome of disease. You can change the cancer type by changing “ACC” here to any of the standard cancer type name abbreviations of TCGA: https://gdc.cancer.gov/resources-tcga-users/tcga-code-tables/tcga-study-abbreviations. Please keep in mind we did not perform the analysis for DLBC, KICH, PCPG, CHOL, SKCM and SARC as described in the methods our paper.
type <- "ACC"
Importantly, in our paper, two outcomes of disease were used, overall survival (OS) or progression-free interval (PFI), depending on cancer type. TCGA’s reccommendations as in doi:10.1016/j.cell.2018.02.052 were followed.
With the following code, PFI can be used as outcome of disease for the appropirate cancer types.
#define cancer types where progression-free interval should be used instead of overall survival
PFI <- c("BRCA", "LGG", "PRAD", "READ", "TGCT", "THCA", "THYM")
Next, a few packages need to be installed.
Depending on the internet connection and machine configuration, this can take up to several minutes.
tryCatch(library("caret"),
error = function(e){
install.packages(pkgs = "caret",
repos = 'https://cran.us.r-project.org')
library("caret")
})
tryCatch(library("openxlsx"),
error = function(e){
install.packages(pkgs = "openxlsx",
repos = 'https://cran.us.r-project.org')
library("openxlsx")
})
tryCatch(library("doParallel"),
error = function(e){
install.packages(pkgs = "doParallel",
repos = 'https://cran.us.r-project.org')
library("doParallel")
})
tryCatch(library("rms"),
error = function(e){
install.packages(pkgs = "rms",
repos = 'https://cran.us.r-project.org')
library("rms")
})
tryCatch(library("dplyr"),
error = function(e){
install.packages(pkgs = "dplyr",
repos = 'https://cran.us.r-project.org')
library("dplyr")
})
tryCatch(library("survival"),
error = function(e){
install.packages(pkgs = "survival",
repos = 'https://cran.us.r-project.org')
library("survival")
})
tryCatch(library("glmnet"),
error = function(e){
install.packages(pkgs = "glmnet",
repos = 'https://cran.us.r-project.org')
library("glmnet")
})
tryCatch(library("SummarizedExperiment"),
error = function(e){
if (!requireNamespace("BiocManager",
quietly = TRUE))
install.packages("BiocManager",
repos = 'https://cran.us.r-project.org')
BiocManager::install("SummarizedExperiment",
update = FALSE,
ask = FALSE)
library("SummarizedExperiment")
})
tryCatch(library("TCGAbiolinks"),
error = function(e){
if (!requireNamespace("BiocManager",
quietly = TRUE))
install.packages("BiocManager",
repos = 'https://cran.us.r-project.org')
BiocManager::install("TCGAbiolinks",
update = FALSE,
ask = FALSE)
library("TCGAbiolinks")
})
tryCatch(library("biomaRt"),
error = function(e){
if (!requireNamespace("BiocManager",
quietly = TRUE))
install.packages("BiocManager",
repos = 'https://cran.us.r-project.org')
BiocManager::install("biomaRt",
update = FALSE,
ask = FALSE)
library("biomaRt")
})
tryCatch(library("subSeq"),
error = function(e){
if (!requireNamespace("BiocManager",
quietly = TRUE))
install.packages("BiocManager",
repos = 'https://cran.us.r-project.org')
BiocManager::install("subSeq",
update = FALSE,
ask = FALSE)
library("subSeq")
})
tryCatch(library("edgeR"),
error = function(e){
if (!requireNamespace("BiocManager",
quietly = TRUE))
install.packages("BiocManager",
repos = 'https://cran.us.r-project.org')
BiocManager::install("edgeR",
update = FALSE,
ask = FALSE)
library("edgeR")
})
tryCatch(library("limma"),
error = function(e){
if (!requireNamespace("BiocManager",
quietly = TRUE))
install.packages("BiocManager",
repos = 'https://cran.us.r-project.org')
BiocManager::install("limma",
update = FALSE,
ask = FALSE)
library("limma")
})
It’s really essential that your version of TCGAbiolinks is 2.12.3 or newer. You can figure that out using:
if(packageVersion("TCGAbiolinks") < '2.12.3'){
stop(paste0("This will not run with versions of TCGAbiolinks older than 2.12.3.",
" Your version is: ",
packageVersion("TCGAbiolinks"),
". Update TCGAbiolinks and try again.",
" Importantly, TCGAbiolinks 2.12.3 and higher only run on R 3.6.1."))
} else {
paste0("Your version is: ",
packageVersion("TCGAbiolinks"),
". This version should be able to handle this example")
}
Now, we can get and pre-process the gene expression data.
#get gene expression data
query <- GDCquery(project = paste0("TCGA-",
as.character(type)),
data.category = "Transcriptome Profiling",
data.type = "Gene Expression Quantification",
workflow.type = "HTSeq - Counts",
legacy = FALSE)
GDCdownload(query,
method = "api",
files.per.chunk = 10,
directory = "GDCdata")
data <- GDCprepare(query,
save = TRUE,
save.filename = paste0("RangSummExp.",
as.character(type),
".Rdata"))
count <- assay(data)[,colData(data)$shortLetterCode == "TP" |
colData(data)$shortLetterCode == "TB" |
colData(data)$shortLetterCode == "TBM"]
map_ens_sym <- rowData(data)
count <- count[!duplicated(rownames(count)),]
#function to keep genes detected in at least 0.1% of samples and to get log2-counts per million
log.cpm <- function(valid.count){
vc.dge <- DGEList(counts = valid.count)
vc.dge.isexpr <- rowSums(cpm(vc.dge) > 1) >= round(dim(vc.dge)[2]*0.001)
vc.dge <- vc.dge[vc.dge.isexpr,]
vc.dge <- calcNormFactors(vc.dge)
vc.voom <- voom(vc.dge)
vlc <- t(vc.voom$E)
vlc <- vlc[complete.cases(vlc),]
return(vlc)
}
logCPM <- log.cpm(count)
#get rid of samples sequenced more than once
duplicate.samples <-
sort(rownames(logCPM)[
duplicated(substr(rownames(logCPM),
1,
12)) |
duplicated(substr(rownames(logCPM),
1,
12),
fromLast = TRUE)])
logCPM <- logCPM[!rownames(logCPM) %in%
duplicate.samples[duplicated(substr(duplicate.samples,
1,
12))],]
In our paper, the updated disease outcomes data published by TCGA in doi:10.1016/j.cell.2018.02.052 were used. Let’s acccess, load and pre-process these data here.
#download outcome data from Liu et al. Cell 2018
#freely accessible on PubMed Central: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6066282/
upd.Surv <- read.xlsx("https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6066282/bin/NIHMS978596-supplement-1.xlsx",
sheet = "TCGA-CDR")
#clean up data
upd.Surv <- upd.Surv[,-1]
upd.Surv$OS <- as.character(upd.Surv$OS) %>%
as.numeric()
upd.Surv$OS.time <- as.character(upd.Surv$OS.time) %>%
as.numeric()
upd.Surv$PFI <- as.character(upd.Surv$PFI) %>%
as.numeric()
upd.Surv$PFI.time <- as.character(upd.Surv$PFI.time) %>%
as.numeric()
#keep only data for cancer type analyzed here
clin <- upd.Surv[upd.Surv$type == type
,c("bcr_patient_barcode",
"OS", "OS.time",
"PFI", "PFI.time")] %>%
droplevels(.)
rownames(clin) <- clin$bcr_patient_barcode
rm(upd.Surv)
#clean up data
if(type %in% PFI) {
clin.cov <- colnames(clin)
clin.cov[clin.cov == "PFI"] <- "status"
clin.cov[clin.cov == "PFI.time"] <- "time"
colnames(clin) <- clin.cov
} else {
clin.cov <- colnames(clin)
clin.cov[clin.cov == "OS"] <- "status"
clin.cov[clin.cov == "OS.time"] <- "time"
colnames(clin) <- clin.cov
}
clin <- clin[!is.na(clin$time),]
clin <- clin[clin$time > 0,]
clin <- clin[substr(clin$bcr_patient_barcode,
1,
12) %in%
substr(rownames(logCPM),
1,
12),]
logCPM <- logCPM[substr(rownames(logCPM),
1,
12) %in%
substr(rownames(clin),
1,
12),]
clin <- clin[
match(substr(rownames(logCPM),
1,
12),
substr(clin$bcr_patient_barcode,
1,
12)),
c("bcr_patient_barcode",
"time",
"status")]
Now that we have loaded and preprocessed the raw data, we can start training and testing our machine learning models. Remember, the aim is to predict outcome of disease based on tumor gene expression data generated by RNA-seq. We will do that using Cox proportional hazards regression with an elastic net penalty.
Let’s create the indices of the samples which will be either in the training set or in the test set.
#create data split (50/50 split)
testindex <- foreach(repetitions = 1:100) %do%{
set.seed(repetitions + 2020)
createFolds(clin[,"status"], k = 2)
}
With the code aboove, as in our paper, we can create 100 different data splits into training and testing samples. However, for computational reasons, we will only perform the analysis for one of these 100 repetitions here. If desired, you can change the number below to chose a different data split for training and testing. Here we picked repetition number 42, but you can pick any from 1-100.
#pick a data split (change to any number from 1 to 100 to run on a different data split)
repetition <- 42
Now let’s use the indices created above to actually split our datasets.
#select actual data split to be used here
testindex <- lapply(testindex,
function(repetitions)
repetitions[[1]])
trainindex <- seq(dim(clin)[1])[
!seq(dim(clin)[1]) %in%
testindex[[repetition]]]
#outcome of disease for test samples
test.clin <- clin[
testindex[[repetition]],]
test.clin <- droplevels(test.clin)
#gene expression for test samples
testset <- logCPM[
testindex[[repetition]],]
#outcome of disease for training samples
train.surv <- Surv(clin[trainindex, "time"],
clin[trainindex, "status"])
#gene expression for training samples
trainset <- logCPM[
trainindex,]
Before we can train our models on our training data, and test on our test samples, we need to scale the gene expression data. As in our paper, we first scaled the training data and then used the center and scale of each gene in the training set to scale the test set. By doing this we ensure that training and testing data are on the same scale.
#scale gene expression of training samples
trainset <- scale(trainset,
center = TRUE,
scale = TRUE)
#scale gene expression of test samples using center and scale of train samples
testset <- scale(testset,
center = attr(trainset, "scaled:center"),
scale = attr(trainset, "scaled:scale"))
Now it’s finally time to train our model! We will make a function (build.model) that creates 5 cross-validation folds and feeds our training algorithm with a range of alpha values. In case you’re not familiar with these terms used here, this is a good start to find more information: https://web.stanford.edu/~hastie/glmnet/glmnet_alpha.html.
Our “build.model” function keeps the same cross-validation folds across different alpha values to ensure that the performances of each alpha are compared based on the same data. If you are using a unix system (but not on windows), the function will run in parallel, but it will still take several minutes to hours to train depending on the number of samples used (adrenocortical carcinoma [ACC] has relatively few samples and should run much faster than breast cancer [BRCA], for example). Also, training takes a lot of memory! If you are running out of memory, make sure to change the number of cores used in in “detectCores()-1” (go from -1 to -2 or -3 to reduce the number of cores) and try again.
#function to train elastic net Cox model
build.model <- function(scaled.log.cpm, surv) {
set.seed(2020)
fold.id <-
createFolds(surv[,2], k = 5, list = FALSE)
alpha <- c(0, 10^seq(-5, -1, 1), seq(0.2, 0.9, 0.1), c(0.95, 0.99, 1))
model <- mclapply(alpha,
function(a)
cv.glmnet(x = scaled.log.cpm,
y = surv,
family = "cox",
type.measure = "deviance",
alpha = a,
foldid = fold.id,
parallel = FALSE,
standardize = FALSE),
mc.cores = ifelse(Sys.info()[['sysname']] == "Windows",
yes = 1,
no = (detectCores()-1)))
names(model) <- alpha
best.alpha <- lapply(model,
function(x)
min(x$cvm)) %>%
unlist(.) %>%
which.min(.) %>%
names(.)
best.model <- model[[best.alpha]]
best.model$"best.alpha" <- best.alpha
return(best.model)
}
#actual training of the elastic net Cox model
model <- build.model(scaled.log.cpm = trainset,
surv = train.surv)
Now we can predict the relative risk of death (or relative risk of recurrence for cancer types that use PFI as measure of outcome) for samples in the test set, and see how the prediction compares to actual survival. We will do that with Cox regression after testing for the proportional hazards assumption.
#predict relative risk of event (RRE) using enet model
test.clin$pred.resp <-
predict(model,
newx = testset,
s = "lambda.min",
type = "response") %>%
log(.) %>%
.[,1]
#build validation model using RRE
cox.model <- coxph(Surv(time, status) ~
pred.resp,
data = test.clin)
#test proportional hazards assumption
cox.zph(cox.model)
#since alpha > 0.05, check validation model
summary(cox.model)
In this example, gene expression RNA-seq data can be used to predict outcome of disease in adrenocortical carcinoma with a concordance index of:
summary(cox.model)$concordance["C"] %>% round(2)
and a p-value in the likelihood ratio test of:
summary(cox.model)$logtest["pvalue"] %>% formatC(format = "e", digits = 0)
Next we can subsample our count matrix to simulate a 100-fold reduction in sequencing depth and see how that impacts predictive performance. The fold reduction can be controlled here by changing “proportion” in “generateSubsampledMatrix” (for example, proportion = 0.001 for a 1000-fold reduction, or proportion = 0.1 for 10-fold reduction).
#subsample gene expression data
#here, 100-fold reduction was used
sub.count <- generateSubsampledMatrix(counts = count,
proportion = 0.01,
seed = 2020)
sub.logCPM <- log.cpm(sub.count)
duplicate.samples <-
sort(rownames(sub.logCPM)[
duplicated(substr(rownames(sub.logCPM),
1,
12)) |
duplicated(substr(rownames(sub.logCPM),
1,
12),
fromLast = TRUE)])
sub.logCPM <- sub.logCPM[!rownames(sub.logCPM) %in%
duplicate.samples[duplicated(substr(duplicate.samples,
1,
12))],]
sub.logCPM <- sub.logCPM[substr(rownames(sub.logCPM),
1,
12) %in%
substr(rownames(clin),
1,
12),]
After splitting and scaling the subsampled data, we can build a model that takes the subsampled gene expression data as input and aims at predicting the relative risk of death (or recurrence, depending on outcome measure used).
sub.testset <- sub.logCPM[
testindex[[repetition]],]
sub.trainset <- sub.logCPM[
trainindex,]
sub.trainset <- scale(sub.trainset,
center = TRUE,
scale = TRUE)
sub.testset <- scale(sub.testset,
center = attr(sub.trainset,
"scaled:center"),
scale = attr(sub.trainset,
"scaled:scale"))
sub.model <- build.model(scaled.log.cpm = sub.trainset,
surv = train.surv)
With the model built on subsampled gene expression data we can try to predict the relative risk of death (or recurrence) of patients in the subsampled test set. Just as for full-coverage models, we can test whether the predicted relative risk correlates with actual outcome using Cox regression if the ph-assumption is not violated.
test.clin$sub.pred.resp <-
log(predict(sub.model,
newx = sub.testset,
s = "lambda.min",
type = "response"))
sub.cox.model <- coxph(Surv(time, status) ~
sub.pred.resp,
data = test.clin)
cox.zph(sub.cox.model)
#since alpha > 0.05, check validation model
summary(sub.cox.model)
These results help illustrate, with the help of an single example, that a strong reduction on sequencing depth does not strongly impact the performance of models that take RNA-seq data and try to predict disease outcome. They indicate that gene expression RNA-seq data at much shallower depths could also be used to predict outcome of disease in adrenocortical carcinoma. The concordance index was:
summary(sub.cox.model)$concordance["C"] %>% round(2)
And the p-value (from likelihood ratio test) was:
summary(sub.cox.model)$logtest["pvalue"] %>% formatC(format = "e", digits = 0)
With the follwoing code, you can see some stats for comparison:
#performance stats
ifelse(summary(sub.cox.model)$coef < 1e-3,
yes = formatC(summary(sub.cox.model)$coef,
format = "e",
digits = 1),
no = round(summary(sub.cox.model)$coef,
digits = 2) %>%
as.numeric())
ifelse(summary(cox.model)$coef < 1e-3,
yes = formatC(summary(cox.model)$coef,
format = "e",
digits = 1),
no = round(summary(cox.model)$coef,
digits = 2) %>%
as.numeric())
And with this code, you can see that there was a 100-fold difference in read sequencing depth between both datasets:
#median library size of original dataset
count %>% t(.) %>% rowSums() %>% median(.) %>% formatC(., format = "e", digits = 1) %>% paste0("median library size of original dataset: ", ., " counts")
#median library size of subsampled dataset
sub.count %>% t(.) %>% rowSums() %>% median(.) %>% formatC(., format = "e", digits = 1) %>% paste0("median library size of subsampled dataset: ", ., " counts")
If desired, this analysis can be run on any cancer type available in TCGA (see second code chunk in the beginning; make sure to pick the correct disease outcome [OS vs PFI]). In addition, any repetition from 1 to 100 can be run to see whether the results are biased due to unequal sample distributions. To change the fold reduction to be simulated, change “proportion” in the function “generateSubsampledMatrix”.