"/home/hwvern/.arduino15/packages/MiniCore/tools/avrdude/7.2-arduino.1/bin/avrdude" "-C/home/hwvern/.arduino15/packages/MiniCore/hardware/avr/3.0.0/avrdude.conf" -v -patmega328p -cstk500v1 -P/dev/ttyUSB0 -b19200 -e -Ulock:w:0xff:m -Uefuse:w:0b11111101:m -Uhfuse:w:0xdf:m -Ulfuse:w:0b11110111:m avrdude: Version 7.2-arduino.1 Copyright the AVRDUDE authors; see https://github.com/avrdudes/avrdude/blob/main/AUTHORS System wide configuration file is /home/hwvern/.arduino15/packages/MiniCore/hardware/avr/3.0.0/avrdude.conf User configuration file is /home/hwvern/.avrduderc User configuration file does not exist or is not a regular file, skipping Using Port : /dev/ttyUSB0 Using Programmer : stk500v1 Overriding Baud Rate : 19200 AVR Part : ATmega328P Chip Erase delay : 9000 us PAGEL : PD7 BS2 : PC2 RESET disposition : possible i/o RETRY pulse : SCK Serial program mode : yes Parallel program mode : yes Timeout : 200 StabDelay : 100 CmdexeDelay : 25 SyncLoops : 32 PollIndex : 3 PollValue : 0x53 Memory Detail : Block Poll Page Polled Memory Type Alias Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack ----------- -------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- eeprom 65 20 4 0 no 1024 4 0 3600 3600 0x00 0x00 flash 65 10 128 0 yes 32768 128 256 4500 4500 0x00 0x00 lfuse 0 0 0 0 no 1 1 0 4500 4500 0x00 0x00 hfuse 0 0 0 0 no 1 1 0 4500 4500 0x00 0x00 efuse 0 0 0 0 no 1 1 0 4500 4500 0x00 0x00 lock 0 0 0 0 no 1 1 0 4500 4500 0x00 0x00 signature 0 0 0 0 no 3 1 0 0 0 0x00 0x00 calibration 0 0 0 0 no 1 1 0 0 0 0x00 0x00 Programmer Type : STK500 Description : Atmel STK500 version 1.x firmware Hardware Version: 2 Firmware Version: 1.18 Topcard : Unknown Vtarget : 0.0 V Varef : 0.0 V Oscillator : Off SCK period : 0.1 us avrdude: AVR device initialized and ready to accept instructions avrdude: device signature = 0x1e950f (probably m328p) avrdude: erasing chip avrdude: processing -U lock:w:0xff:m avrdude: reading input file 0xff for lock with 1 byte in 1 section within [0, 0] avrdude: writing 1 byte lock ... avrdude: 1 byte of lock written avrdude: verifying lock memory against 0xff avrdude: 1 byte of lock verified avrdude: processing -U efuse:w:0b11111101:m avrdude: reading input file 0b11111101 for efuse with 1 byte in 1 section within [0, 0] avrdude: writing 1 byte efuse ... avrdude: 1 byte of efuse written avrdude: verifying efuse memory against 0b11111101 avrdude: 1 byte of efuse verified avrdude: processing -U hfuse:w:0xdf:m avrdude: reading input file 0xdf for hfuse with 1 byte in 1 section within [0, 0] avrdude: writing 1 byte hfuse ... avrdude: 1 byte of hfuse written avrdude: verifying hfuse memory against 0xdf avrdude: 1 byte of hfuse verified avrdude: processing -U lfuse:w:0b11110111:m avrdude: reading input file 0b11110111 for lfuse with 1 byte in 1 section within [0, 0] avrdude: writing 1 byte lfuse ... avrdude: 1 byte of lfuse written avrdude: verifying lfuse memory against 0b11110111 avrdude: 1 byte of lfuse verified avrdude done. Thank you. "/home/hwvern/.arduino15/packages/MiniCore/tools/avrdude/7.2-arduino.1/bin/avrdude" "-C/home/hwvern/.arduino15/packages/MiniCore/hardware/avr/3.0.0/avrdude.conf" -v -patmega328p -cstk500v1 -P/dev/ttyUSB0 -b19200 "-Uflash:w:/home/hwvern/.arduino15/packages/MiniCore/hardware/avr/3.0.0/bootloaders/urboot/atmega328p/watchdog_1_s/autobaud/uart0_rxd0_txd1/led+b5/urboot_atmega328p_pr_ee_ce.hex:i" -Ulock:w:0xff:m avrdude: Version 7.2-arduino.1 Copyright the AVRDUDE authors; see https://github.com/avrdudes/avrdude/blob/main/AUTHORS System wide configuration file is /home/hwvern/.arduino15/packages/MiniCore/hardware/avr/3.0.0/avrdude.conf User configuration file is /home/hwvern/.avrduderc User configuration file does not exist or is not a regular file, skipping Using Port : /dev/ttyUSB0 Using Programmer : stk500v1 Overriding Baud Rate : 19200 AVR Part : ATmega328P Chip Erase delay : 9000 us PAGEL : PD7 BS2 : PC2 RESET disposition : possible i/o RETRY pulse : SCK Serial program mode : yes Parallel program mode : yes Timeout : 200 StabDelay : 100 CmdexeDelay : 25 SyncLoops : 32 PollIndex : 3 PollValue : 0x53 Memory Detail : Block Poll Page Polled Memory Type Alias Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack ----------- -------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- eeprom 65 20 4 0 no 1024 4 0 3600 3600 0x00 0x00 flash 65 10 128 0 yes 32768 128 256 4500 4500 0x00 0x00 lfuse 0 0 0 0 no 1 1 0 4500 4500 0x00 0x00 hfuse 0 0 0 0 no 1 1 0 4500 4500 0x00 0x00 efuse 0 0 0 0 no 1 1 0 4500 4500 0x00 0x00 lock 0 0 0 0 no 1 1 0 4500 4500 0x00 0x00 signature 0 0 0 0 no 3 1 0 0 0 0x00 0x00 calibration 0 0 0 0 no 1 1 0 0 0 0x00 0x00 Programmer Type : STK500 Description : Atmel STK500 version 1.x firmware Hardware Version: 2 Firmware Version: 1.18 Topcard : Unknown Vtarget : 0.0 V Varef : 0.0 V Oscillator : Off SCK period : 0.1 us avrdude: AVR device initialized and ready to accept instructions avrdude: device signature = 0x1e950f (probably m328p) avrdude: Note: flash memory has been specified, an erase cycle will be performed. To disable this feature, specify the -D option. avrdude: erasing chip avrdude: processing -U flash:w:/home/hwvern/.arduino15/packages/MiniCore/hardware/avr/3.0.0/bootloaders/urboot/atmega328p/watchdog_1_s/autobaud/uart0_rxd0_txd1/led+b5/urboot_atmega328p_pr_ee_ce.hex:i avrdude: reading input file /home/hwvern/.arduino15/packages/MiniCore/hardware/avr/3.0.0/bootloaders/urboot/atmega328p/watchdog_1_s/autobaud/uart0_rxd0_txd1/led+b5/urboot_atmega328p_pr_ee_ce.hex for flash with 368 bytes in 2 sections within [0x7e80, 0x7fff] using 3 pages and 16 pad bytes avrdude: writing 368 bytes flash ... Writing | ################################################## | 100% 0.09s avrdude: 368 bytes of flash written avrdude: verifying flash memory against /home/hwvern/.arduino15/packages/MiniCore/hardware/avr/3.0.0/bootloaders/urboot/atmega328p/watchdog_1_s/autobaud/uart0_rxd0_txd1/led+b5/urboot_atmega328p_pr_ee_ce.hex Reading | ################################################## | 100% 0.00s avrdude: 368 bytes of flash verified avrdude: processing -U lock:w:0xff:m avrdude: reading input file 0xff for lock with 1 byte in 1 section within [0, 0] avrdude: writing 1 byte lock ... avrdude: 1 byte of lock written avrdude: verifying lock memory against 0xff avrdude: 1 byte of lock verified avrdude done. Thank you.