From f2497f3469324fc678fabdd4f84181241282f329 Mon Sep 17 00:00:00 2001 From: Mattia Dal Ben Date: Wed, 2 Jan 2019 11:19:55 +0100 Subject: [PATCH] Added some more references --- redox-w/README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/redox-w/README.md b/redox-w/README.md index 3d56e93..17b7323 100644 --- a/redox-w/README.md +++ b/redox-w/README.md @@ -152,7 +152,7 @@ Assembly steps: The receiver assembly is pretty straightforward, you can install the components in any order you like with the exception of the YJ-14015: it should be installed **after** the right angled header (PROGR_HEADER1). Suggested assembly order: -1. Solder D1, D2, D3 and D4 LEDs. See image for orientation. +1. Solder D1, D2, D3 and D4 LEDs. See [image](#leds-installation-detail) for orientation. 2. Solder R4, R6, R7 and R8 resistors. 3. Solder R1, R2 and R3 resistors. 4. Solder the AMS1117. @@ -179,7 +179,7 @@ The receiver assembly is pretty straightforward, you can install the components Assembled receiver PCB, LEDs installation detail.

-> :information_source: Please note that here I used 220 Ohm resistors because I used only blue and white LEDs since I only had those laying around. You should use the resistor values suggested [here](#default-configuration). +> :information_source: Please note that here I installed 220 Ohm resistors because I used only blue and white LEDs as I only had those laying around. You should use the resistor values suggested [here](#resistor-values) or follow the [default configuration](#default-configuration). ## Firmware