diff --git a/img/redox-w-receiver-assembly-1.jpg b/img/redox-w-receiver-assembly-1.jpg
new file mode 100644
index 0000000..4f7fbd4
Binary files /dev/null and b/img/redox-w-receiver-assembly-1.jpg differ
diff --git a/img/redox-w-receiver-assembly-2.jpg b/img/redox-w-receiver-assembly-2.jpg
new file mode 100644
index 0000000..53d0162
Binary files /dev/null and b/img/redox-w-receiver-assembly-2.jpg differ
diff --git a/img/redox-w-receiver-assembly-3.jpg b/img/redox-w-receiver-assembly-3.jpg
new file mode 100644
index 0000000..cf85aca
Binary files /dev/null and b/img/redox-w-receiver-assembly-3.jpg differ
diff --git a/img/redox-w-receiver-assembly-4.jpg b/img/redox-w-receiver-assembly-4.jpg
new file mode 100644
index 0000000..45156d3
Binary files /dev/null and b/img/redox-w-receiver-assembly-4.jpg differ
diff --git a/img/redox-w-receiver-assembly-5.jpg b/img/redox-w-receiver-assembly-5.jpg
new file mode 100644
index 0000000..0a64aee
Binary files /dev/null and b/img/redox-w-receiver-assembly-5.jpg differ
diff --git a/redox-w/README.md b/redox-w/README.md
index 6f35057..47a3f51 100644
--- a/redox-w/README.md
+++ b/redox-w/README.md
@@ -104,6 +104,35 @@ Assembly steps:
 <img src="../img/pcb-w-assembly1.jpg" alt="Wireless Redox assembled PCB" width="600"/>
 </p>
 
+#### Receiver Assembly
+
+The assembly is streightforward, I suggest you to follow the following order:
+
+1. Solder all the Mitosis receiver components on the PCB. Leave the programming header for last.
+2. Solder the Arduino Pro Micro to the Mitosis receiver PCB.
+
+> :warning: Notice the orientation of the RGB LED (Cree CLVBA-FKA). Here I highlighted the dot on the PCB which must match with the notch on the LED packaging.
+
+<p align="center">
+<img src="../img/redox-w-assembly-1.jpg" alt="Mitosis receiver PCB LED installation detail." width="300"/>
+<img src="../img/redox-w-assembly-2.jpg" alt="RGB LED detail" width="300"/>
+</p>
+
+##### Assembled receiver PCB:
+
+<p align="center">
+<img src="../img/redox-w-assembly-3.jpg" alt="Receiver PCB assembly front." width="300"/>
+<img src="../img/redox-w-assembly-4.jpg" alt="Receiver PCB assembly back." width="300"/>
+</p>
+
+*Note*: You might notice that I didn't soldered the second push button, this is because it's not used in the receiver firmware.
+
+##### Assembled receiver:
+
+<p align="center">
+<img src="../img/redox-w-assembly-5.jpg" alt="Receiver PCB assembly front." width="600"/>
+</p>
+
 #### Firmware
 
 This keyboard uses two types of MCUs so it needs two different firmwares. For flashing the firmware use the following order: