Demonstrations of memleak. memleak traces and matches memory allocation and deallocation requests, and collects call stacks for each allocation. memleak can then print a summary of which call stacks performed allocations that weren't subsequently freed. For example: # ./memleak -p $(pidof allocs) Attaching to pid 5193, Ctrl+C to quit. [11:16:33] Top 2 stacks with outstanding allocations: 80 bytes in 5 allocations from stack main+0x6d [allocs] __libc_start_main+0xf0 [libc-2.21.so] [11:16:34] Top 2 stacks with outstanding allocations: 160 bytes in 10 allocations from stack main+0x6d [allocs] __libc_start_main+0xf0 [libc-2.21.so] Each entry printed is a set of allocations that originate from the same call stack, and that weren't freed yet. The number of bytes and number of allocs are followed by the call stack, top to bottom, of the allocation site. As time goes on, it becomes apparent that the main function in the allocs process is leaking memory, 16 bytes at a time. Fortunately, you don't have to inspect each allocation individually -- you get a nice summary of which stack is responsible for a large leak. Occasionally, you do want the individual allocation details. Perhaps the same stack is allocating various sizes and you want to confirm which sizes are prevalent. Use the -a switch: # ./memleak -p $(pidof allocs) -a Attaching to pid 5193, Ctrl+C to quit. [11:16:33] Top 2 stacks with outstanding allocations: addr = 948cd0 size = 16 addr = 948d10 size = 16 addr = 948d30 size = 16 addr = 948cf0 size = 16 64 bytes in 4 allocations from stack main+0x6d [allocs] __libc_start_main+0xf0 [libc-2.21.so] [11:16:34] Top 2 stacks with outstanding allocations: addr = 948d50 size = 16 addr = 948cd0 size = 16 addr = 948d10 size = 16 addr = 948d30 size = 16 addr = 948cf0 size = 16 addr = 948dd0 size = 16 addr = 948d90 size = 16 addr = 948db0 size = 16 addr = 948d70 size = 16 addr = 948df0 size = 16 160 bytes in 10 allocations from stack main+0x6d [allocs] __libc_start_main+0xf0 [libc-2.21.so] When using the -p switch, memleak traces the libc allocations of a particular process. Without this switch, kernel allocations are traced instead. For example: # ./memleak Attaching to kernel allocators, Ctrl+C to quit. ... 248 bytes in 4 allocations from stack bpf_prog_load [kernel] sys_bpf [kernel] 328 bytes in 1 allocations from stack perf_mmap [kernel] mmap_region [kernel] do_mmap [kernel] vm_mmap_pgoff [kernel] sys_mmap_pgoff [kernel] sys_mmap [kernel] 464 bytes in 1 allocations from stack traceprobe_command [kernel] traceprobe_probes_write [kernel] probes_write [kernel] __vfs_write [kernel] vfs_write [kernel] sys_write [kernel] entry_SYSCALL_64_fastpath [kernel] 8192 bytes in 1 allocations from stack alloc_and_copy_ftrace_hash.constprop.59 [kernel] ftrace_set_hash [kernel] ftrace_set_filter_ip [kernel] arm_kprobe [kernel] enable_kprobe [kernel] kprobe_register [kernel] perf_trace_init [kernel] perf_tp_event_init [kernel] Here you can see that arming the kprobe to which our eBPF program is attached consumed 8KB of memory. Loading the BPF program also consumed a couple hundred bytes (in bpf_prog_load). memleak stores each allocated block along with its size, timestamp, and the stack that allocated it. When the block is deleted, this information is freed to reduce the memory overhead. To avoid false positives, allocations younger than a certain age (500ms by default) are not printed. To change this threshold, use the -o switch. By default, memleak prints its output every 5 seconds. To change this interval, pass the interval as a positional parameter to memleak. You can also control the number of times the output will be printed before exiting. For example: # ./memleak 1 10 ... will print the outstanding allocation statistics every second, for ten times, and then exit. memleak may introduce considerable overhead if your application or kernel is allocating and freeing memory at a very high rate. In that case, you can control the overhead by sampling every N-th allocation. For example, to sample roughly 10% of the allocations and print the outstanding allocations every 5 seconds, 3 times before quitting: # ./memleak -p $(pidof allocs) -s 10 5 3 Attaching to pid 2614, Ctrl+C to quit. [11:16:33] Top 2 stacks with outstanding allocations: 16 bytes in 1 allocations from stack main+0x6d [allocs] __libc_start_main+0xf0 [libc-2.21.so] [11:16:38] Top 2 stacks with outstanding allocations: 16 bytes in 1 allocations from stack main+0x6d [allocs] __libc_start_main+0xf0 [libc-2.21.so] [11:16:43] Top 2 stacks with outstanding allocations: 32 bytes in 2 allocations from stack main+0x6d [allocs] __libc_start_main+0xf0 [libc-2.21.so] Note that even though the application leaks 16 bytes of memory every second, the report (printed every 5 seconds) doesn't "see" all the allocations because of the sampling rate applied. USAGE message: # ./memleak -h usage: memleak.py [-h] [-p PID] [-t] [-a] [-o OLDER] [-c COMMAND] [--combined-only] [-s SAMPLE_RATE] [-T TOP] [-z MIN_SIZE] [-Z MAX_SIZE] [-O OBJ] [interval] [count] Trace outstanding memory allocations that weren't freed. Supports both user-mode allocations made with libc functions and kernel-mode allocations made with kmalloc/kmem_cache_alloc/get_free_pages and corresponding memory release functions. positional arguments: interval interval in seconds to print outstanding allocations count number of times to print the report before exiting optional arguments: -h, --help show this help message and exit -p PID, --pid PID the PID to trace; if not specified, trace kernel allocs -t, --trace print trace messages for each alloc/free call -a, --show-allocs show allocation addresses and sizes as well as call stacks -o OLDER, --older OLDER prune allocations younger than this age in milliseconds -c COMMAND, --command COMMAND execute and trace the specified command --combined-only show combined allocation statistics only -s SAMPLE_RATE, --sample-rate SAMPLE_RATE sample every N-th allocation to decrease the overhead -T TOP, --top TOP display only this many top allocating stacks (by size) -z MIN_SIZE, --min-size MIN_SIZE capture only allocations larger than this size -Z MAX_SIZE, --max-size MAX_SIZE capture only allocations smaller than this size -O OBJ, --obj OBJ attach to allocator functions in the specified object EXAMPLES: ./memleak -p $(pidof allocs) Trace allocations and display a summary of "leaked" (outstanding) allocations every 5 seconds ./memleak -p $(pidof allocs) -t Trace allocations and display each individual allocator function call ./memleak -ap $(pidof allocs) 10 Trace allocations and display allocated addresses, sizes, and stacks every 10 seconds for outstanding allocations ./memleak -c "./allocs" Run the specified command and trace its allocations ./memleak Trace allocations in kernel mode and display a summary of outstanding allocations every 5 seconds ./memleak -o 60000 Trace allocations in kernel mode and display a summary of outstanding allocations that are at least one minute (60 seconds) old ./memleak -s 5 Trace roughly every 5th allocation, to reduce overhead