Skip to content

Latest commit

 

History

History

liquibase

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
 
 
 
 
 
 
 
 
 
 

Creating Liquibase snapshots for OpenMRS

This document explains why Liquibase snapshots are introduced to OpenMRS and how versioning of database changes is affected by snapshots. It also contains instructions for creating new Liquibase snapshots, running them from the console and adding them to the OpenMRS code base.

Why Liquibase snapshots?

OpenMRS uses Liquibase to evolve its database model. The respective change sets have grown in the course of time and contain unneeded changes. E.g. there are tables or columns that are created, modified and eventually deleted as they are no longer used.

Large and partly outdated Liquibase change sets affect OpenMRS in two ways:

  • Unneeded changes slow down the initialisation of OpenMRS
  • Liquibase change sets are hard to read and understand as they contain unused code.

An alternative model is based on snapshots where historic change sets are consolidated into smaller change sets.

Folder structure and naming conventions

This section describes the folder structure and naming conventions used for Liquibase snapshots and updates.

Before the introduction of snapshots, all Liquibase change log files were located in the resources folder of openmrs-api:

  • openmrs-core/api/src/main/resources

Since the introduction of snapshots, the respective change log files are no longer stored in openmrs-core/api/src/main/resources but in the following subfolders:

  • openmrs-core/api/src/main/resources/org/openmrs/liquibase/snapshots contains all Liquibase snapshot files.

  • openmrs-core/api/src/main/resources/org/openmrs/liquibase/updates contains all Liquibase update files.

Version numbers are part of the change log file name:

  • liquibase-update-to-latest-2.1.x.xml.

Versioning of database changes with snapshots

This section compares Liquibase files before and after the introduction of Liquibase snapshots.

Change sets in OpenMRS 2.1.x

OpenMRS 2.1.x is the last version that contains the full history of database changes. The respective Liquibase files are:

  • org/openmrs/liquibase/snapshots/schema-only/liquibase-schema-only-1.9.x.xml defines the OpenMRS schema

  • org/openmrs/liquibase/snapshots/core-data/liquibase-core-data-1.9.x.xml defines core data for OpenMRS

  • org/openmrs/liquibase/updates/liquibase-update-to-latest-1.9.x/.xml is an empty change log that was added so that change log version also comes with an update file

  • org/openmrs/liquibase/updates/liquibase-update-to-latest-2.0.x/.xml contains all database changes introduced until OpenMRS 2.0, some changes go back to 2009

  • org/openmrs/liquibase/updates/liquibase-update-to-latest-2.1.x.xml contains all database changes introduced since OpenMRS 2.0

Change sets in OpenMRS 2.2.x

OpenMRS 2.2.x is the first version using Liquibase snapshots. Please note that this version did not exist at the time of writing this document.

  • org/openmrs/liquibase/snapshots/schema-only/liquibase-schema-only-2.1.x.xml defines the OpenMRS schema. This file is a snapshot generated from OpenMRS 2.1.x.

  • org/openmrs/liquibase/snapshots/core-data/liquibase-core-data-2.1.x.xml defines core data. Again, this file is a snapshot generated from OpenMRS 2.1.x.

  • org/openmrs/liquibase/updates/liquibase-update-to-latest-2.2.x.xml contains database changes introduced by OpenMRS 2.2.x

Change sets in (hypothetic) OpenMRS 4.8.x

Looking forward to a (hypothetic) version 4.8.x of OpenMRS, the respective change sets are:

  • org/openmrs/liquibase/snapshots/schema-only/liquibase-schema-only-4.7.x.xml defines the OpenMRS schema. This file is a snapshot generated from OpenMRS 4.7.x.

  • org/openmrs/liquibase/snapshots/core-data/liquibase-core-data-4.7.x.xml defines core data. Again, this file is a snapshot generated from OpenMRS 4.7.x.

  • org/openmrs/liquibase/updates/liquibase-update-to-latest-4.8.x.xml contains database changes introduced by OpenMRS 4.8.x

Further Liquibase files

The folder openmrs-core/api/src/main/resources contains further Liquibase files:

  • liquibase-schema-only.xml references the latest snapshot file for creating the OpenMRS schema and continues to be used by other OpenMRS projects, e.g. openmrs-standalone.

  • liquibase-core-data.xml references the latest snapshot file for OpenMRS data and continues to be used by other OpenMRS projects, e.g. openmrs-standalone.

  • liquibase-update-to-latest.xml references the latest update file for the OpenMRS database and continues to be used by other OpenMRS projects, e.g. openmrs-standalone.

  • liquibase-update-to-latest-from-1.9.x.xml is used by integration tests and includes references to multiple org/openmrs/liquibase/updates/liquibase-update-to-latest-a.b.x.xml files.

  • liquibase-empty-changelog.xml is used as a default Liquibase file by the org.openmrs.util.DatabaseUpdater class.

  • liquibase-update-to-latest-template.xml is a template for creating new update files.

When to generate Liquibase shapshots

Liquibase snapshots need to be created...

  1. when a new minor or major version of OpenMRS is created (such as 2.3.x or 3.0.x), new snapshot files need to be generated for the previous versions. The new snapshot files are added to

    • org/openmrs/liquibase/snapshots/schema-only and
    • org/openmrs/liquibase/snapshots/core-data

    in the OpenMRS master branch. Do not forget to include the version number in the change log filenames.

    Liquibase updates introduced with the new version are added to

    • org/openmrs/liquibase/updates

    The examples for the (hypothetic) OpemMRS version 4.8.x further above illustrates the different version numbers to use for the new change log files.

  2. when a database change is added to an existing minor or major version, the snapshot files of later versions need to be updated so that they include the change.

Generating and applying Liquibase snapshots

The pom file of the openmrs-liquibase module contains a template for generating Liquibase snapshots from an existing database and applying snapshots to an OpenMRS database.

How to generate Liquibase snapshots

Step 1 - Drop your local OpenMRS schema

E.g. by running the script openmrs-core/liquibase/scripts/drop_openmrs_schema.sql:

mysql -u root -p < openmrs-core/liquibase/scripts/drop_openmrs_schema.sql

Take care NOT to run this script on a production database.

Step 2 - Build and initialise OpenMRS

cd <some root folder>/openmrs-core
mvn clean install
cd webapp
rm -r ~/.OpenMRS
mvn jetty:run

Open https://localhost:8080/openmrs/initialsetup and choose the following options:

  • simple installation in step 2 of the installation wizard

  • not to add demo data in step 3 of the installation wizard

Step 3 - Create snapshots of the OpenMRS database

Run the following commands to generate the Liquibase snapshots where username and password refer to a MySQL user:

cd <some root folder>/openmrs-core/liquibase
. scripts/create_liquibase_snapshots.sh <username> <password>

The following snapshot files are created:

  • openmrs-core/liquibase/snapshots/liquibase-schema-only-SNAPSHOT.xml
  • openmrs-core/liquibase/snapshots/liquibase-core-data-SNAPSHOT.xml

As an alternative to using the shell script, the snapshots can be created as follows:

cd <some root folder>/openmrs-core/liquibase

mvn \
  -DoutputChangelogfile=liquibase-schema-only-SNAPSHOT.xml \
  -Dusername=<database user> \
  -Dpassword=<database password> \
  liquibase:generateChangeLog
  
mvn \
  -DdiffTypes=data \
  -DoutputChangelogfile=liquibase-core-data-SNAPSHOT.xml \
  -Dusername=<database user> \
  -Dpassword=<database password> \
  liquibase:generateChangeLog

Step 4 - Apply corrections to generated snapshot files

The generated Liquibase snapshot files need to be corrected. The appendix of this document contains a detailed description of the changes applied to the generated files.

Also, the OpenMRS license header needs to be added to both files.

This can be accomplished by running another utility script:

cd <some root folder>/openmrs-core/liquibase
. scripts/fix_liquibase_snapshots.sh

Alternatively, the corrections can be applied by running these commands:

cd <some root folder>/openmrs-core/liquibase
java -jar ./target/openmrs-liquibase-2.4.0-SNAPSHOT-jar-with-dependencies.jar

Please note that the jar file needs to be created before generating the Liquibase snapshots as the build process will detect that the generated files do not (yet) contain the OpenMRS license header.

How to test Liquibase snapshots

Testing the (corrected) Liquibase snapshots comprises three steps:

  • Drop the OpenMRS database
  • Create an empty OpenMRS database
  • Apply the (corrected) Liquibase snapshots to the new OpenMRS database

Take care NOT to execute these steps on a production database as the OpenMRS database is dropped.

Testing Liquibase snapshots with a utility script

All three steps can be accomplished by running a third utility script where username and password refer to a MySQL user:

cd <some root folder>/openmrs-core/liquibase
. scripts/test_liquibase_snapshots.sh <username> <password>

Testing Liquibase snapshots manually

As an alternative to using the utility script, apply the steps described below.

Step 1 - Drop your local OpenMRS schema

E.g. by running the script drop_openmrs_schema.sql:

mysql -u root -p < openmrs-core/liquibase/scripts/drop_openmrs_schema.sql

Again, take care NOT to run this script on a production database.

Step 2 - Create an empty OpenMRS database

E.g. by running the script create_openmrs_database.sql:

mysql -u root -p < openmrs-core/liquibase/scripts/create_openmrs_database.sql

The script creates the openmrs database and the tables liquibasechangelog and liquibasechangeloglock.

Step 3 - Use the snapshots to update the OpenMRS database

Execute the following commands:

cd <some root folder>/openmrs-core/liquibase

mvn \
  -Dchangelogfile=liquibase-schema-only-UPDATED-SNAPSHOT.xml  \
  -Dusername=<database user> \
  -Dpassword=<database password> \
  liquibase:update

mvn \
  -Dchangelogfile=liquibase-core-data-UPDATED-SNAPSHOT.xml  \
  -Dusername=<database user> \
  -Dpassword=<database password> \
  liquibase:update

One more time, take care NOT to run these commands on a production database.

How to add snapshots to OpenMRS master

The new snapshots files are now ready to be added to the OpenMRS master branch.

Step 1 - Add the new snapshot files

Move the file liquibase-schema-only-UPDATED-SNAPSHOT.xml to org/openmrs/liquibase/snapshots/schema-only and rename it to liquibase-schema-only-<major.minor>.x.xml.

Similarly. move the file liquibase-core-data-UPDATED-SNAPSHOT.xml to org/openmrs/liquibase/snapshots/core-data and rename it to liquibase-core-data-<major.minor>.x.xml.

For example, when creating snapshots for version 2.2.x of OpenMRS, the resulting files are:

  • org/openmrs/liquibase/snapshots/schema-only/liquibase-schema-only-2.2.x.xml
  • org/openmrs/liquibase/snapshots/core-data/liquibase-core-data-2.2.x.xml

Step 2 - Create a new liquibase update file

In the folder org/openmrs/liquibase/updates, create an empty Liquibase change log file called liquibase-update-to-latest-<major.minor+1>.x.xml.

Use resources/liquibase-update-to-latest-template.xml as a template for creating the new file.

For example, when adding snapshots from OpenMRS 2.2.x, the resulting file is:

  • org/openmrs/liquibase/updates/liquibase-updates-2.3.x.xml

The minor version number of the new update change log is increased by one as this file contains all Liquibase change sets that are introduced

  • after OpenMRS version 2.2 was created
  • and before OpenMRS version 2.3 will be created

Include the new file in resources/liquibase-update-to-latest-from-1.9.x.xml, it is used by integration tests (as mentioned above).

Increment, by one, the changeset count constant CHANGE_SET_COUNT_FOR_GREATER_THAN_2_1_X in org.openmrs.util.DatabaseUpdaterDatabaseIT This caters for the one empty changeset in the liquibase update file that you have just created.

Step 3 - Update references in legacy Liquibase change log files

The following files in openmrs-core/api/src/main/resources contain references to the latest Liquibase snapshot and update change logs and need to be updated after the new change log files were added:

  • liquibase-schema-only.xml
  • liquibase-core-data.xml
  • liquibase-update-to-latest.xml

Step 4 - Make OpenMRS aware of the new versions

New snapshot and update versions need to be added to the org.openmrs.liquibase.ChangeLogVersions class.

After adding the new change log files and updating the ChangeLogVersions class, run the test org.openmrs.liquibase.ChangeLogVersionsTest to ensure that the definition of change log versions and the actual change log files are in sync. The test fails if either versions are missing in the ChangeLogVersions class or if change log files are missing in the resource folder.

Step 5 - Validate Hibernate mappings

Run org.openmrs.util.databasechange.ValidateHibernateMappingsDatabaseIT to check whether the data types in the new liquibase files are compatible with the data types specified in the Hibernate mappings.

The test can be run in two ways:

  • By running mvn clean test -Pskip-default-test -Pintegration-test -Dtest=ValidateHibernateMappingsIT2 in the console
  • Alternatively, by running the test in IntelliJ or another IDE

Step 6 - Build and initialise OpenMRS with the new snapshot and update files

Drop your local OpenMRS database and build and initialise OpenMRS as described in the section "How to generate Liquibase snapshots".

How to run manual integration tests with older versions of OpenMRS

When introducing Liquibase snapshots, the integration of snapshots with older versions of OpenMRS had to be tested. This section describes how these tests were conducted, so that they can be repeated as and when needed.

Step 1 - Drop your local OpenMRS schema

E.g. by running the script drop_openmrs_schema.sql:

mysql -u root -p < openmrs-core/liquibase/scripts/drop_openmrs_schema.sql

Take care NOT to run this script on a production database.

Step 2 - Delete the OpenMRS folder in your profile

rm -r ~/.OpenMRS

Take care NOT to do that on a production environment.

Step 3 - Build, initialise and run an older OpenMRS version, e.g. 2.2.x

cd <some root folder>/openmrs-core
git checkout 2.2.x
mvn clean install
cd webapp
mvn jetty:run

Open https://localhost:8080/openmrs/initialsetup and choose the following options:

  • simple installation in step 2 of the installation wizard

  • not to add demo data in step 3 of the installation wizard

Step 4 - Stop OpenMRS after the initialisation

Step 5 - Build, initialise and run a version of OpenMRS that uses Liquibase snapshots, e.g. master

cd <some root folder>/openmrs-core
git checkout master
mvn clean install
cd webapp
mvn jetty:run

Open https://localhost:8080/openmrs and do the following steps:

  • log in as administrator
  • review the list of Liquibase change sets that need to be run to update the OpenMRS database
  • run the pending change sets

Step 6 - Check the OpenMRS log

The OpenMRS log file lists the change sets that were run. Validate that the expected change sets were executed.

References

https://issues.openmrs.org/browse/TRUNK-4830

https://www.liquibase.org/documentation/maven

https://dev.mysql.com/doc/refman/8.0/en/mysql-batch-commands.html

Appendix

Corrections needed for liquibase-schema-only-SNAPSHOT.xml

After generating the file liquibase-schema-only-SNAPSHOT.xml, a few changes need to be applied to that file.

Change sets referring to liquibasechangelog and liquibasechangeloglock need to be removed.

The attribute value of the table clob_datatype_storage must be of type CLOB (and not LONGTEXT):

<changeSet ...>
    <createTable tableName="clob_datatype_storage">
        ...
        <column name="value" type="CLOB">
        ...
    </createTable>
</changeSet>

When creating snapshots, Liquibase version 3.x uses the types BIT or BIT(1) for boolean attributes in a MySQL database. These types need to be changed to BOOLEAN:

<changeSet ...>
    <createTable tableName="...">
        ...
        <column name="..." ... type="BOOLEAN">
        ...
    </createTable>
</changeSet>

Corrections needed for liquibase-core-data-SNAPSHOT.xml

After generating the file liquibase-core-data-SNAPSHOT.xml, a few changes need to be applied to that file.

Change sets referring to liquibasechangelog and liquibasechangeloglock need to be removed.

The order of change sets in liquibase-core-data-SNAPSHOT.xml needs to be as follows:

  1. <databaseChangeLog ... \>
  2. ... <insert tableName="person"> ...
  3. ... <insert tableName="users"> ...
  4. ... <insert tableName="care_setting"> ...
  5. ... <insert tableName="concept_class"> ...
  6. ... <insert tableName="concept_datatype"> ...
  7. ... <insert tableName="concept"> ...
  8. ... followed by all other change sets as generated by liquibase

The username and password of the user with name="system_id" and value="admin" need to have the same values as in org/openmrs/liquibase/snapshots/core-data/liquibase-core-data-2.2.x.xml:

<changeSet author= ... >
	<insert tableName="users">
		<column name="user_id" valueNumeric="1"/>
		<column name="system_id" value="admin"/>
		<column name="username" value=""/>
		<column name="password" value="4a1750c8607dfa237de36c6305715c223415189"/>
		<column name="salt" value="c788c6ad82a157b712392ca695dfcf2eed193d7f"/>
        ...
	</insert>
    ...
</changeSet>