build-a-pi

##################################################################
#                                                                #
#	#   #	#       #     #      #        #####  #   #       #
#	#  #	# #   # #    ##     # #      #       #  #        #
#	# #	#   #   #   # #    #   #    #        # #         #
#	##	#       #  #####  #######  #         ##          #
#	# #	#       #     #   #     #   #        # #         #
#	#  #	#       #     #   #     #    #       #  #        #
#	#   #	#       #     #   #     #     #####  #   #       #
#                                                                #
##################################################################
#20200620

DESK=$(printenv | grep DISPLAY)
MYPATH="$(cd "$(dirname "${BASH_SOURCE[0]}")" >/dev/null 2>&1 && pwd)"
LOGO=${MYPATH}/logo.png
RB=${HOME}/.config/KM4ACK
BASE=${MYPATH}/base.txt
ADDITIONAL=${MYPATH}/additional.txt
UTILITY=${MYPATH}/utility.txt
FLSUITE=${MYPATH}/flsuite.txt
CONFIG=${MYPATH}/config
FUNCTIONS=${MYPATH}/functions
TEMPCRON=${MYPATH}/cron.tmp
DIR=${MYPATH}/temp
WHO=$(whoami)
VERSION=$(grep "version=" ${MYPATH}/changelog | sed 's/version=https://')
DATE=$(date)

FINISH() {
	if [ -f "${BASE}" ]; then
		rm ${BASE}
	fi

	if [ -f "${ADDITIONAL}" ]; then
		rm ${ADDITIONAL}
	fi

	if [ -f "${FLSUITE}" ]; then
		rm ${FLSUITE}
	fi

	if [ -f "${UTILITY}" ]; then
		rm ${UTILITY}
	fi
}

trap FINISH EXIT

#check for display. can't run from SSH
if [ -z "$DESK" ]; then
	cat <<EOF
This script cannot be run from an SSH session.
Please boot into the pi's desktop environment,
open the terminal, and run this script again
EOF
	exit 0
fi

#####################################
#	Verify not run as root
#####################################
if [ "$WHO" = 'root' ]; then
	yad --form --width=500 --text-align=center --center --title="Build-a-Pi" --text-align=center \
		--image ${LOGO} --window-icon=${LOGO} --image-on-top --separator="|" --item-separator="|" \
		--text="<b>ROOT DETECTED</b>\rDon't run this script as root. \
Restart the script without sudo" \
		--button=gtk-close
	exit 1
fi

#####################################
#	Old OS Check
#####################################
V_ID=$(grep VERSION_ID /etc/os-release | sed 's/VERSION_ID="//;s/"//')

if [ "$V_ID" -le 10 ]; then
NOTICEPATH=/run/user/$UID

cat <<EOF >${NOTICEPATH}/intro.txt
Build a Pi 3.2.0 and later does not support
RaspiOS Buster or earlier versions of RaspiOS.
You should consider upgrading to RaspiOS 11
(Bullseye). By clicking ok you will be moved
to the last version of Build a Pi (3.1.4) that 
supports Pi OS Buster. Please note there are 
no plans to update Build a Pi for Buster going 
forward.  In other words, you are on your own 
if it is broke and you are still running Pi OS
10 (Buster).

EOF

INTRO=$(yad --width=600 --height=300 --text-align=center --center --title="Out of Date OS Detected!" --show-uri \
	--image ${LOGO} --window-icon=${LOGO} --image-on-top --separator="|" --item-separator="|" \
	--text-info \
	--button="OK":1 <${NOTICEPATH}/intro.txt \
	--button="Exit":2 \
	>/dev/null 2>&1)
	BUT=$?
	echo $BUT
	if [ $BUT = 2 ] || [ $BUT = 252 ]; then
	exit
	fi
	rm ${NOTICEPATH}/intro.txt
	cd $HOME/pi-build
	git checkout buster 
	bash build-a-pi & exit
fi

#####################################
#	end Old OS Check
#####################################

#install YAD & jq as needed
clear
echo
echo
echo "#######################################"
echo "#  Updating repository & installing   #"
echo "#  a few needed items before we begin #"
echo "#######################################"
sudo apt-get update
if ! hash yad 2>/dev/null; then
	sudo apt install -y yad
fi
if ! hash jq 2>/dev/null; then
	sudo apt install -y jq
fi
if ! hash bc >/dev/null; then
	sudo apt install -y bc
fi
#an issue pops up every now and again concerning xterm.
#link lxterminal to xterm. see https://github.com/km4ack/pi-build/issues/34
sudo ln -s /usr/bin/lxterminal /usr/bin/xterm

#####################################
#	Check if run before
#####################################
if [ -f "${RB}" ]; then
	bash ${MYPATH}/update &
	exit
fi
#####################################
#	Check user is pi
#####################################
#This section commented out 12APRIL2022 for testing. Should be removed once testing is complete.
#if [ "$WHO" != 'pi' ]; then
#	yad --form --width=500 --text-align=center --center --title="Build-a-Pi" --text-align=center \
#		--image ${LOGO} --window-icon=${LOGO} --image-on-top --separator="|" --item-separator="|" \
#		--text="<b>USER NAME IS NOT PI</b>\rThis script is designed to be run as the pi user. Please set the user name to pi \
#and try again. You can change the user name after the build is complete but some configuration may not work \
#as expected" \
#		--button=gtk-close
#	exit 1
#fi
#####################################
#	notice to user
#####################################
cat <<EOF >${MYPATH}/intro.txt
This script takes approximately 4 hours to complete
if you choose to install everything. If you find it
helpful please consider a donation to encourage future
development.

https://paypal.me/km4ack
EOF

INTRO=$(yad --width=550 --height=250 --text-align=center --center --title="Build-a-Pi" --show-uri \
	--image ${LOGO} --window-icon=${LOGO} --image-on-top --separator="|" --item-separator="|" \
	--text-info \
	--button="Continue":2 <${MYPATH}/intro.txt \
	>/dev/null 2>&1)
BUT=$?
if [ ${BUT} = 252 ]; then
	rm ${MYPATH}/intro.txt
	exit
fi
rm ${MYPATH}/intro.txt
#####################################
#	Create autostart dir
#used to autostart conky at boot
#####################################
mkdir -p ${HOME}/.config/autostart

#####################################
#	Get User Call
#####################################
CALL() {
	INFO=$(yad --form --width=420 --text-align=center --center --title="Build-a-Pi" \
		--image ${LOGO} --window-icon=${LOGO} --image-on-top --separator="|" --item-separator="|" \
		--text="<b>version $VERSION</b>" \
		--field="Call Sign*" \
		--field="<b>* Required</b>":LBL \
		--button="Continue":2)
	BUT=$?
	if [ ${BUT} = 252 ]; then
		exit
	fi
}
CALL
CALL=$(echo ${INFO} | awk -F "|" '{print $1}')
CALL=${CALL^^}

#Verify call not empty
ATTEMPTS=0
while [ -z "$CALL" ]; do
	if [ $ATTEMPTS -eq 3 ]; then
		yad --form --width=420 --text-align=center --center --title="Build-a-Pi" --text-align=center \
			--image ${LOGO} --window-icon=${LOGO} --image-on-top --separator="|" --item-separator="|" \
			--text="<b>Empty callsign after 3 attempts. Quiting!</b>" \
			--button=gtk-ok
		exit
	fi

	yad --form --width=420 --text-align=center --center --title="Build-a-Pi" --text-align=center \
		--image ${LOGO} --window-icon=${LOGO} --image-on-top --separator="|" --item-separator="|" \
		--text="<b>Call Can't be Blank</b>" \
		--button=gtk-ok

	((ATTEMPTS = ATTEMPTS + 1))
	CALL
	CALL=$(echo ${INFO} | awk -F "|" '{print $1}')
	CALL=${CALL^^}
done

echo "CALL=$CALL" >${CONFIG}

#####################################
#	Base Apps
#####################################
yad --center --list --checklist --width=600 --height=600 --separator="" \
	--image ${LOGO} --column=Check --column=App --column=Description \
	--print-column=2 --window-icon=${LOGO} --image-on-top --text-align=center \
	--text="<b>Base Applications</b>" --title="Build-a-Pi" \
	false "HOTSPOT" "Hot Spot Generator for Portable Ops" \
	false "HSTOOLS" "Tools to Manage Hot Spot" \
	false "GPS" "GPS Software" \
	false "GPSUPDATE" "Tool to Manage GPS Devices" \
	false "ARDOP" "Modem for HF" \
	false "ARDOPGUI" "GUI for ARDOP" \
	false "VARA" "VARA Modem - <b>Pi 4 Required</b>" \
	false "HAMLIB" "Needed for Rig Control" \
	false "DIREWOLF" "Software TNC" \
	false "AX25" "Data Link Layer Protocol" \
	false "PULSE" "Pulse Audio Control Interface" \
	--button="Exit":1 \
	--button="Check All and Continue":3 \
	--button="Next":2 >${BASE}
BUT=$?
if [ ${BUT} = 252 ] || [ ${BUT} = 1 ]; then
	exit
fi

if [ ${BUT} = 3 ]; then
	BASEAPPS=(HOTSPOT HSTOOLS GPS ARDOP ARDOPGUI VARA HAMLIB DIREWOLF AX25 PULSE GPSUPDATE)
	for i in "${BASEAPPS[@]}"; do
		echo "$i" >>${BASE}
	done
fi

#If VARA is chosen, make sure we have a Pi 4 32 bit system to work with. 
#As of 02OCT2022 the VARA installer only works with the Pi 4.
VARA_CHK=$(grep VARA ${BASE})
if [ -n "$VARA_CHK" ]; then
	FREEMEM=$(free -m | grep Mem: | awk '{ print $2 }')
	if [ $FREEMEM -lt 1500 ]; then
	echo "Not enough memory available"
	yad --form --width=500 --text-align=center --center --title="Build-a-Pi" --text-align=center \
	--image ${LOGO} --window-icon=${LOGO} --image-on-top --separator="|" --item-separator="|" \
	--text="<b>Not enough memory</b>\rVARA requires a Pi 4.\r\rVARA will not be installed during the build." \
	--button=gtk-ok
	sed -i 's/VARA//;/^$/d' ${BASE}
	fi

fi

#check if hotspot is chosen for install & get info if needed
HS=$(grep "HOTSPOT" ${BASE})
if [ -n "$HS" ]; then
	HSINFO() {
		#unblock wifi
		sudo rfkill unblock all >/dev/null 2>&1
		#bring wifi up
		sudo ifconfig wlan0 up
		#LIST=$(sudo iw dev "wlan0" scan ap-force | egrep "^BSS|SSID:" | grep SSID: | sed 's/SSID:https://' | awk '{ print $1 }')
		#LIST=$(echo $LIST | sed 's/ /|/g')
		LIST=$(sudo iw dev "wlan0" scan ap-force | sed -ne 's/^.*SSID: \(..*\)/\1/p' | sort | uniq | paste -sd '|')

		HSINFO=$(yad --center --form --width=400 --height=400 --separator="|" --item-separator="|" \
			--image ${LOGO} --column=Check --column=App --column=Description \
			--window-icon=${LOGO} --image-on-top --text-align=center \
			--text="<b>HotSpot Information\r\rPlease enter the information\rbelow \
for the Hot Spot\r</b>NOTE: The last field is the password for the hotspot. You will use this password to \
connect to your Pi when it is in hotspot mode <b>This password can only contain letters and numbers</b>" \
			--title="Build-a-Pi" \
			--field="Home Wifi SSID":CB "$LIST" \
			--field="Home Wifi Password" \
			--field="Hot Spot Password" \
			--button="Exit":1 \
			--button="Continue":2 \
			--button="Refresh Wifi":3)
		BUT=$?
		if [ ${BUT} = 3 ]; then
			HSINFO #Call HSINFO function
		fi

		if [ ${BUT} = 252 ] || [ ${BUT} = 1 ]; then
			exit
		fi
		#}
		#HSINFO
		#fi
		SHACKSSID=$(echo $HSINFO | awk -F "|" '{print $1}')
		SHACKPASS=$(echo $HSINFO | awk -F "|" '{print $2}')
		HSPASS=$(echo $HSINFO | awk -F "|" '{print $3}')

		#Check password length
		if [ -n "$HS" ]; then
			COUNT=${#HSPASS}
			if [ ${COUNT} -lt 8 ]; then
				yad --center --form --width=300 --height=200 --separator="|" \
					--image ${LOGO} --window-icon=${LOGO} --image-on-top --text-align=center \
					--text="<b>Hotspot password has to be 8-63 characters</b>" --title="Build-a-Pi" \
					--button=gtk-ok
				HSINFO
			fi
		fi

	}
	HSINFO
fi

echo "SHACKSSID=$SHACKSSID" >>${CONFIG}
echo "SHACKPASS=\"$SHACKPASS\"" >>${CONFIG}
echo "HSPASS=\"$HSPASS\"" >>${CONFIG}
###################################
#CHECK IF GPS IS CHOSEN TO INSTALL#
###################################
GPSINSTALL=$(cat ${BASE} | grep GPS)
if [ -n "${GPSINSTALL}" ]; then

	yad --center --height="300" --width="300" --form --separator="|" --item-separator="|" --title="GPS" \
		--image ${LOGO} --window-icon=${LOGO} --image-on-top \
		--text="\r\r\r\r\r<b><big>Connect your GPS to the pi</big></b>" \
		--button="Continue":2

	BUT=$?

	USB=$(ls /dev/serial/by-id)
	USB=$(echo "NONE $USB") #see https://github.com/km4ack/pi-build/issues/293
	USB=$(echo $USB | sed "s/\s/|/g")

	GPS=$(yad --center --height="600" --width="300" --form --separator="|" --item-separator="|" --title="GPS" \
		--image ${LOGO} --window-icon=${LOGO} --image-on-top \
		--text="Choose Your GPS" \
		--field="GPS":CB "$USB")
	BUT=$?
	if [ ${BUT} = 252 ] || [ ${BUT} = 1 ]; then
		echo exiting
		exit
	fi

	GPS=$(echo ${GPS} | awk -F "|" '{print $1}')
	GPS=/dev/serial/by-id/${GPS}
	echo "GPS=${GPS}" >>${CONFIG}
fi

#####################################
#	FLSUITE
#####################################
yad --center --list --checklist --width=600 --height=600 --separator="" \
	--image ${LOGO} --column=Check --column=App --column=Description \
	--print-column=2 --window-icon=${LOGO} --image-on-top --text-align=center \
	--text="<b>FLDIGI Suite</b>" --title="Build-a-Pi" \
	false "FLRIG" "Rig Contol GUI" \
	false "FLDIGI" "Digital Software" \
	false "FLAMP" "File Transfer Program" \
	false "FLNET" "Net Control Software" \
	false "FLMSG" "Forms Manager" \
	false "FLWRAP" "File Encapsulation" \
	--button="Exit":1 \
	--button="Check All and Continue":3 \
	--button="Next":2 >${FLSUITE}
BUT=$?
if [ ${BUT} = 252 ] || [ ${BUT} = 1 ]; then
	exit
fi
if [ ${BUT} = 3 ]; then
	FLAPPS=(FLRIG FLDIGI FLAMP FLNET FLMSG FLWRAP)
	for i in "${FLAPPS[@]}"; do
		echo "$i" >>${FLSUITE}
	done
fi

#####################################
#	Ham Apps
#####################################
yad --center --list --checklist --width=600 --height=600 --separator="" \
	--image ${LOGO} --column=Check --column=App --column=Description \
	--print-column=2 --window-icon=${LOGO} --image-on-top --text-align=center \
	--text="<b>Ham Applications</b>" --title="Build-a-Pi" \
	false "CONKY" "System Information Display" \
	false "PI-APRS" "APRS Message Application" \
	false "CHIRP" "Program Radios" \
	false "GARIM" "File Transfer Program" \
	false "PAT" "Radio Email Application" \
	false "PAT-MENU" "Control for Pat Winlink" \
	false "JS8CALL" "Weak Signal Digital Mode Software" \
	false "M0IAX" "Tools for JS8Call Messages" \
	false "WSJTX" "Weak Signal Digital Mode Software" \
	false "PYQSO" "Logging Software" \
	false "HAMRS" "Logging Software" \
	false "CQRLOG" "Logging Software" \
	false "EES" "KM4ACK Emergency Email Server" \
	false "QSSTV" "Slow Scan TV" \
	false "GRIDTRACKER" "Track Grids in WSJTX" \
	false "HAMCLOCK" "Clock for Ham Radio Ops" \
	false "PROPAGATION" "Propagation Prediction Software" \
	false "YAAC" "Yet Another APRS Client" \
	false "XASTIR" "APRS Client" \
	false "GPREDICT" "Satellite Tracking" \
	false "TQSL" "LOTW Software" \
	false "GRIDCALC" "Grid Calculation Software" \
	false "REPEAT" "Repeater Directory" \
	--button="Exit":1 \
	--button="Check All and Continue":3 \
	--button="Next":2 >${ADDITIONAL}
BUT=$?
if [ ${BUT} = 252 ] || [ ${BUT} = 1 ]; then
	exit
fi

if [ ${BUT} = 3 ]; then
	ADDAPPS=(CONKY PI-APRS CHIRP GARIM PAT PAT-MENU JS8CALL M0IAX WSJTX PYQSO
		HAMRS EES QSSTV GRIDTRACKER HAMCLOCK PROPAGATION YAAC XASTIR GPREDICT TQSL
		GRIDCALC CQRLOG REPEAT)

	for i in "${ADDAPPS[@]}"; do
		echo "$i" >>${ADDITIONAL}
	done
fi

#check if hamclock is being installed
HCCHECK=$(grep "HAMCLOCK" ${ADDITIONAL})
if [ -n "$HCCHECK" ]; then

	HC=$(yad --form --width=420 --text-align=center --center --title="Build-a-Pi" \
		--image ${LOGO} --window-icon=${LOGO} --image-on-top --separator="|" --item-separator="|" \
		--text="<b>version $VERSION</b>" \
		--field="Ham Clock Size":CB "SMALL|LARGE" \
		--button="Continue":2)
	HC=$(echo $HC | awk -F "|" '{print $1}')
	sed -i 's/HAMCLOCK//' ${ADDITIONAL}
	echo $HC >>${ADDITIONAL}
fi


PATCHECK=$(grep "PAT" ${ADDITIONAL})
if [ -n "$PATCHECK" ]; then
	INFO=$(yad --form --width=420 --text-align=center --center --title="Build-a-Pi" \
		--image ${LOGO} --window-icon=${LOGO} --image-on-top --separator="|" --item-separator="|" \
		--text="<b>version $VERSION</b>" \
		--field="Six Character Grid Square" \
		--field="Winlink Password" \
		--field="<b>Password is case sensitive</b>":LBL \
		--button="Continue":2)
	GRID=$(echo ${INFO} | awk -F "|" '{print $1}')
	GRID=${GRID^^}
	WL2KPASS=$(echo ${INFO} | awk -F "|" '{print $2}')
	echo "GRID=$GRID" >>${CONFIG}
	echo "WL2KPASS=\"$WL2KPASS\"" >>${CONFIG}
fi

#####################################
#	Utilities
#####################################
yad --center --list --checklist --width=600 --height=600 --separator="" \
	--image ${LOGO} --column=Check --column=App --column=Description \
	--print-column=2 --window-icon=${LOGO} --image-on-top --text-align=center \
	--text="<b>Utilities</b>" --title="Build-a-Pi" \
	false "DIPOLE" "Dipole Calculator" \
	false "PACKETSEARCH" "Winlink Packet Tool" \
	false "CALLSIGN" "Call sign lookup" \
	false "TEMPCONVERT" "Temperature Converter" \
	false "GPARTED" "Disk Utility Tool" \
	false "SHOWLOG" "Log file viewer" \
	false "PISTATS" "Pi3/4 Stats Monitor" \
	false "TELNET" "Telnet Protocol" \
	false "PITERM" "piQtTermTCP Terminal Program" \
	false "QTSOUND" "piQtSoundModem" \
	false "SECURITY" "File Encryption Software" \
	false "YGATE" "Yaesu APRS Software" \
	false "BPQ" "LinBPQ Software" \
	false "BATT" "Battery Test Script" \
	false "VNC" "VNC Client Application" \
	false "XYGRIB" "Grib File Viewer" \
	--button="Exit":1 \
	--button="Check All and Continue":3 \
	--button="Install Selected":2 >${UTILITY}
BUT=$?
if [ ${BUT} = 252 ] || [ ${BUT} = 1 ]; then
	exit
fi

if [ ${BUT} = 3 ]; then
	UTILAPPS=(DIPOLE PACKETSEARCH CALLSIGN TEMPCONVERT GPARTED SHOWLOG PISTATS TELNET PITERM QTSOUND SECURITY YGATE BPQ BATT VNC XYGRIB)
	for i in "${UTILAPPS[@]}"; do
		echo "$i" >>${UTILITY}
	done
fi

#backup crontab
crontab -l >$TEMPCRON
echo "@reboot sleep 10 && export DISPLAY=:0 && ${MYPATH}/.complete" >>$TEMPCRON
${MYPATH}/.funfacts &
#upgrade the system
sudo apt-get -y upgrade
sudo apt -y full-upgrade

#fix issue 254 05JULY2021
sudo sed -i 's/#hdmi_force_hotplug=1/hdmi_force_hotplug=1/' config.txt

#set wallpaper
#fix issue 193
sudo cp $HOME/pi-build/bap-wallpaper.jpg /usr/share/rpd-wallpaper/
pcmanfm --set-wallpaper /usr/share/rpd-wallpaper/bap-wallpaper.jpg

mkdir -p ${DIR} 2>/dev/null

#add virtual sound card link for pulse audio
cd ${DIR} || ! echo "Failure"
cat >tempsound <<EOF
pcm.pulse {
	type pulse
	}
ctl.pulse {
	type pulse
	}
EOF
sudo chown root:root tempsound
sudo mv tempsound /etc/asound.conf

#mod sound card for Buster May 2020
#so it will always load as card #2
cd ${DIR} || ! echo "Failure"
cat >tempsound <<EOF
#Internal sound
options snd-bcm2835 index=0

#USB soundcard
options snd-usb-audio index=3
EOF
sudo chown root:root tempsound
sudo mv tempsound /etc/modprobe.d/alsa.conf

#install ham radio menu
sudo apt-get install -y extra-xdg-menus

#setup bin dir and put in path
mkdir -p ${HOME}/bin
echo "export PATH=$PATH:${HOME}/bin" >>${HOME}/.bashrc

#set update script to exec
chmod +x ${MYPATH}/update ${MYPATH}/build-a-pi

#create build-a-pi menu item
cd ${MYPATH} || ! echo "Failure"
cat >build-a-pi.desktop <<EOF
[Desktop Entry]
Name=Build-a-Pi
GenericName=KM4ACK Build-a-Pi
Comment=Build-a-Pi App Manager
Exec=${MYPATH}/update
Icon=${MYPATH}/logo.png
Terminal=true
Type=Application
Categories=Settings;DesktopSettings;GTK;X-LXDE-Settings;
EOF

sudo mv build-a-pi.desktop /usr/share/applications/

#create repair-bap tool
cat <<EOF > /run/user/$UID/repair-bap
#!/bin/bash

if [ ! -f $HOME/pi-build/update ]; then
echo "################################"
echo "#  BAP update tool not found.  #"
echo "#  Repairing, please stand by  #"
echo "################################"
cd $HOME
git clone https://github.com/km4ack/pi-build.git || echo "Could not connect to Github. Check your internet and try again"
echo "Repair complete. Run the Build a Pi update tool using the shortcut in the Pi menu"
else
clear;echo;echo
echo "Update tool is present on the system."
fi
EOF
chmod +x /run/user/$UID/repair-bap
sudo mv /run/user/$UID/repair-bap /usr/local/bin/

#####################################
#	Install Base Apps
#####################################
touch ${RB}
echo "INITIAL=\"build date $DATE version $VERSION\"" >> ${RB}
source ${FUNCTIONS}/base.function
while read i; do
	$i
done <${BASE}

#####################################
#	Install FLSUITE
#####################################
source ${FUNCTIONS}/flsuite.function
#perform memory increase if needed
CHECKFL="${MYPATH}/flsuite.txt"
if [ -s "$CHECKFL" ]; then
	FLSTART
fi
touch ${RB}
while read i; do
	$i
done <${FLSUITE}

#Perform memory reset if needed
if [ -s "$CHECKFL" ]; then
	FLSTOP
fi

#####################################
#	Install ADDITIONAL Apps
#####################################
source ${FUNCTIONS}/additional.function
while read i; do
	$i
done <${ADDITIONAL}

#####################################
#	Install KM4ACK Utilites
#####################################
source ${FUNCTIONS}/utility.function
while read i; do
	$i
done <${UTILITY}

#create new menu subcategories. One for FLDIGI Suite and
#one for Build a Pi.
bash ${HOME}/pi-build/menu-update

#####################################
#	END CLEANUP
#####################################
#Remove temp files
rm ${BASE} ${ADDITIONAL} ${UTILITY} ${FLSUITE} >/dev/null 2>&1
rm -rf ${DIR} >/dev/null 2>&1
sudo apt -y autoremove > /dev/null 2>&1

#remove libham (rigctl) installed from apt
#since it conflicts with hamlib installed from source
sudo apt purge -y libhamlib4

#restore crontab
crontab ${TEMPCRON}
rm ${TEMPCRON}

echo "WE ARE ALL DONE HERE.  If you close this window, you will have to reboot manually."

#reboot when done
yad --width=400 --height=200 --title="Reboot" --image ${LOGO} \
	--text-align=center --skip-taskbar --image-on-top \
	--wrap --window-icon=${LOGO} \
	--undecorated --text="<big><big><big><b>Build Finished \rReboot Required</b></big></big></big>\r\r" \
	--button="Reboot Now":0 \
	--button="Exit":1
BUT=$(echo $?)

if [ ${BUT} = 0 ]; then
	echo rebooting
	sudo reboot
elif [ ${BUT} = 1 ]; then
	exit
fi