Skip to content

AxDen-Dev/CC1312R1_Smart_Agriculture_example_gcc

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

13 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Sub-G Smart Agriculture



TOP BOTTOM

"Sub-G Smart Agriculture" uses AxDen's Aggregator Platform to collect key sensor information necessary for Smart Agriculture such as temperature, barometric pressure, and illuminance.
This is an example that provides quick testing of various service scenarios that require long-distance communication of 1Km or more.

Related hardware kits can be purchased from the Naver Smart Store.
Purchase Link : naver smart store

You can purchase it by contacting [email protected]


Key features and functions

MCU Description
CC1312R1 TI ROTS, EasyLink

* Low-power technology with TI Sensor Controller is available in the Production version family.

Sensor Description
BME280 Air pressure, temperature sensor
HDC1080 Humidity, temperature sensor
VCNL4040 ToF distance, ambient light sensor
Soil moisture sensor On board

"Sub-G Smart Agriculture" example collects key sensor information required in Smart Agriculture such as temperature, barometric pressure, and illuminance, and transmits it using Sub-G long-distance communication. In conjunction with the AxDen Aggregator Platform, you can check sensor information on the web and mobile without building infrastructure such as servers and DBs, and use the stored sensor information to learn Edge AI.


Check via terminal


If you have an adapter board, you can check the communication through the terminal.
After connecting the adapter board and the Sub-G Smart Agriculture sensor to the PC, check through serial programs such as screen and putty. (Baudrate is 9600)
RF rx example terminal RF tx example terminal


Check via AXDEN Aggregator platform


Enter COMPANY ID nad DEVCIE ID provided on the AXDEN Aggregator Platform website into COMPANY_ID and DEVCIE_ID in the Protocol.h header file.

AXDEN Aggregator Platfrom


#define COMPANY_ID 0


#define DEVICE_TYPE 0


Complie and flash.

Check whether COMPANY_ID and DEVICE_ID are applied correctly through the terminal

Sensor information can be found on the Web or Mobile as shown in the image below



Hardware Pinmap

You can check in the board_define.h header file.