| Licence | OSHWA |
|---|---|
 |
 |
qmk clonecd qmk_firmwareexport LTO=Y- To go to bootloader hold the ESC key while plugging in (or RESET switch, then hold the BOOT switch, release RESET, release BOOT). The board should now appear in lsusb (or device manager).
make 0xcb/static:via:flash
You can use the humanpnp to easily place components.
KiCad 6 stable
| Top | Bottom |
|---|---|
 |
 |
| References | Value | Quantity | Part Nb. |
|---|---|---|---|
| C3, C4 | 20pF | 2 | C415398 |
| C1, C2 | 0.1uF | 2 | C409821 |
| R1, R2 | 5.1K | 2 | C58676 |
| R3, R4 | 75 | 2 | C713897 |
| R5 | 10k | 1 | C58673 |
| R6 | 1.5k | 1 | C433494 |
| D1, ..., D48 | 1N4148 | 48 | C14516 |
| D49, D50 | 1N4729 | 2 | C2532 |
| U1 | ATmega328-P | 1 | ATMEGA328P-PU-ND |
| Y1 | 16MHz | 1 | C16212 |
| F1 | 500mA | 1 | C268799 |
| SW1, SW2 | RESET, BOOT | 1 | 450-1650-ND |
| MX1, ..., MX44 | MX-NoLED | 43 | Cherry MX switches |
| OL1 | OLED | 1 | SSD1306 128x32 |
| MX12 | EC11 | 1 | PEC11R-4220F-S0024-ND |
| J1 | USB4085 Type C | 1 | 640-USB4085-GF-A |