Jump to content

OpenEVSE

From Wikipedia, the free encyclopedia

OpenEVSE (Electric Vehicle Supply Equipment) is an Arduino-based charging station created by Christopher Howell and Sam C. Lin.[1] The charger is composed of open-source software[2] and hardware which can be made by individuals.[3]

The project started in February 2011,[4][1] with an experiment aimed at generating the SAE J1772 pilot signal[5] on an Arduino-compatible ATmega328 8-Bit AVR MCU. Subsequent experiments continued until a prototype J1772-compatible controller was created. As of now, OpenEVSE powers charging stations all over the world.[6]

References

[edit]
  1. ^ a b OpenEVSE About page
  2. ^ OpenEVSE at github
  3. ^ Software and hardware needed to build the OpenEVSE charger
  4. ^ "Weekend(s) Project - DIY EVSE". My Nissan Leaf Forum. 15 February 2011. Retrieved 2019-09-09.
  5. ^ "openEVSE - openalia". Retrieved 2019-05-01.
  6. ^ "MEP EP #162: Electric Vehicle Charging And Cat Safety MacroFab Engineering podcast". player.fm. 2019-03-06. Retrieved 11 Jun 2024.
[edit]