CUDA C++ Programming Guide
The programming guide to the CUDA model and interface.
Changes from Version 12.5
Added sections Atomic accesses & synchronization primitives and Memcpy()/Memset() Behavior With Unified Memory.
Added section Encoding a Tensor Map on Device.
1. Introduction
1.1. The Benefits of Using GPUs
The Graphics Processing Unit (GPU)1 provides much higher instruction throughput and memory bandwidth than the CPU within a similar price and power envelope. Many applications leverage these higher capabilities to run faster on the GPU than on the CPU (see GPU Applications). Other computing devices, like FPGAs, are also very energy efficient, but offer much less programming flexibility than GPUs.
This difference in capabilities between the GPU and the CPU exists because they are designed with different goals in mind. While the CPU is designed to excel at executing a sequence of operations, called a thread, as fast as possible and can execute a few tens of these threads in parallel, the GPU is designed to excel at executing thousands of them in parallel (amortizing the slower single-thread performance to achieve greater throughput).
The GPU is specialized for highly parallel computations and therefore designed such that more transistors are devoted to data processing rather than data caching and flow control. The schematic Figure 1 shows an example distribution of chip resources for a CPU versus a GPU.
Figure 1 The GPU Devotes More Transistors to Data Processing
Devoting more transistors to data processing, for example, floating-point computations, is beneficial for highly parallel computations; the GPU can hide memory access latencies with computation, instead of relying on large data caches and complex flow control to avoid long memory access latencies, both of which are expensive in terms of transistors.
In general, an application has a mix of parallel parts and sequential parts, so systems are designed with a mix of GPUs and CPUs in order to maximize overall performance. Applications with a high degree of parallelism can exploit this massively parallel nature of the GPU to achieve higher performance than on the CPU.
1.2. CUDA®: A General-Purpose Parallel Computing Platform and Programming Model
In November 2006, NVIDIA® introduced CUDA®, a general purpose parallel computing platform and programming model that leverages the parallel compute engine in NVIDIA GPUs to solve many complex computational problems in a more efficient way than on a CPU.
CUDA comes with a software environment that allows developers to use C++ as a high-level programming language. As illustrated by Figure 2, other languages, application programming interfaces, or directives-based approaches are supported, such as FORTRAN, DirectCompute, OpenACC.
Figure 2 GPU Computing Applications. CUDA is designed to support various languages and application programming interfaces.
1.3. A Scalable Programming Model
The advent of multicore CPUs and manycore GPUs means that mainstream processor chips are now parallel systems. The challenge is to develop application software that transparently scales its parallelism to leverage the increasing number of processor cores, much as 3D graphics applications transparently scale their parallelism to manycore GPUs with widely varying numbers of cores.
The CUDA parallel programming model is designed to overcome this challenge while maintaining a low learning curve for programmers familiar with standard programming languages such as C.
At its core are three key abstractions — a hierarchy of thread groups, shared memories, and barrier synchronization — that are simply exposed to the programmer as a minimal set of language extensions.
These abstractions provide fine-grained data parallelism and thread parallelism, nested within coarse-grained data parallelism and task parallelism. They guide the programmer to partition the problem into coarse sub-problems that can be solved independently in parallel by blocks of threads, and each sub-problem into finer pieces that can be solved cooperatively in parallel by all threads within the block.
This decomposition preserves language expressivity by allowing threads to cooperate when solving each sub-problem, and at the same time enables automatic scalability. Indeed, each block of threads can be scheduled on any of the available multiprocessors within a GPU, in any order, concurrently or sequentially, so that a compiled CUDA program can execute on any number of multiprocessors as illustrated by Figure 3, and only the runtime system needs to know the physical multiprocessor count.
This scalable programming model allows the GPU architecture to span a wide market range by simply scaling the number of multiprocessors and memory partitions: from the high-performance enthusiast GeForce GPUs and professional Quadro and Tesla computing products to a variety of inexpensive, mainstream GeForce GPUs (see CUDA-Enabled GPUs for a list of all CUDA-enabled GPUs).
Figure 3 Automatic Scalability
Note
A GPU is built around an array of Streaming Multiprocessors (SMs) (see Hardware Implementation for more details). A multithreaded program is partitioned into blocks of threads that execute independently from each other, so that a GPU with more multiprocessors will automatically execute the program in less time than a GPU with fewer multiprocessors.
1.4. Document Structure
This document is organized into the following sections:
Introduction is a general introduction to CUDA.
Programming Model outlines the CUDA programming model.
Programming Interface describes the programming interface.
Hardware Implementation describes the hardware implementation.
Performance Guidelines gives some guidance on how to achieve maximum performance.
CUDA-Enabled GPUs lists all CUDA-enabled devices.
C++ Language Extensions is a detailed description of all extensions to the C++ language.
Cooperative Groups describes synchronization primitives for various groups of CUDA threads.
CUDA Dynamic Parallelism describes how to launch and synchronize one kernel from another.
Virtual Memory Management describes how to manage the unified virtual address space.
Stream Ordered Memory Allocator describes how applications can order memory allocation and deallocation.
Graph Memory Nodes describes how graphs can create and own memory allocations.
Mathematical Functions lists the mathematical functions supported in CUDA.
C++ Language Support lists the C++ features supported in device code.
Texture Fetching gives more details on texture fetching.
Compute Capabilities gives the technical specifications of various devices, as well as more architectural details.
Driver API introduces the low-level driver API.
CUDA Environment Variables lists all the CUDA environment variables.
Unified Memory Programming introduces the Unified Memory programming model.
- 1
-
The graphics qualifier comes from the fact that when the GPU was originally created, two decades ago, it was designed as a specialized processor to accelerate graphics rendering. Driven by the insatiable market demand for real-time, high-definition, 3D graphics, it has evolved into a general processor used for many more workloads than just graphics rendering.
2. Programming Model
This chapter introduces the main concepts behind the CUDA programming model by outlining how they are exposed in C++.
An extensive description of CUDA C++ is given in Programming Interface.
Full code for the vector addition example used in this chapter and the next can be found in the vectorAdd CUDA sample.
2.1. Kernels
CUDA C++ extends C++ by allowing the programmer to define C++ functions, called kernels, that, when called, are executed N times in parallel by N different CUDA threads, as opposed to only once like regular C++ functions.
A kernel is defined using the __global__ declaration specifier and the number of CUDA threads that execute that kernel for a given kernel call is specified using a new <<<...>>>execution configuration syntax (see C++ Language Extensions). Each thread that executes the kernel is given a unique thread ID that is accessible within the kernel through built-in variables.
As an illustration, the following sample code, using the built-in variable threadIdx, adds two vectors A and B of size N and stores the result into vector C:
// Kernel definition
__global__ void VecAdd(float* A, float* B, float* C)
{
int i = threadIdx.x;
C[i] = A[i] + B[i];
}
int main()
{
...
// Kernel invocation with N threads
VecAdd<<<1, N>>>(A, B, C);
...
}
Here, each of the N threads that execute VecAdd() performs one pair-wise addition.
2.2. Thread Hierarchy
For convenience, threadIdx is a 3-component vector, so that threads can be identified using a one-dimensional, two-dimensional, or three-dimensional thread index, forming a one-dimensional, two-dimensional, or three-dimensional block of threads, called a thread block. This provides a natural way to invoke computation across the elements in a domain such as a vector, matrix, or volume.
The index of a thread and its thread ID relate to each other in a straightforward way: For a one-dimensional block, they are the same; for a two-dimensional block of size (Dx, Dy), the thread ID of a thread of index (x, y) is (x + y Dx); for a three-dimensional block of size (Dx, Dy, Dz), the thread ID of a thread of index (x, y, z) is (x + y Dx + z Dx Dy).
As an example, the following code adds two matrices A and B of size NxN and stores the result into matrix C:
// Kernel definition
__global__ void MatAdd(float A[N][N], float B[N][N],
float C[N][N])
{
int i = threadIdx.x;
int j = threadIdx.y;
C[i][j] = A[i][j] + B[i][j];
}
int main()
{
...
// Kernel invocation with one block of N * N * 1 threads
int numBlocks = 1;
dim3 threadsPerBlock(N, N);
MatAdd<<<numBlocks, threadsPerBlock>>>(A, B, C);
...
}
There is a limit to the number of threads per block, since all threads of a block are expected to reside on the same streaming multiprocessor core and must share the limited memory resources of that core. On current GPUs, a thread block may contain up to 1024 threads.
However, a kernel can be executed by multiple equally-shaped thread blocks, so that the total number of threads is equal to the number of threads per block times the number of blocks.
Blocks are organized into a one-dimensional, two-dimensional, or three-dimensional grid of thread blocks as illustrated by Figure 4. The number of thread blocks in a grid is usually dictated by the size of the data being processed, which typically exceeds the number of processors in the system.
Figure 4 Grid of Thread Blocks
The number of threads per block and the number of blocks per grid specified in the <<<...>>> syntax can be of type int or dim3. Two-dimensional blocks or grids can be specified as in the example above.
Each block within the grid can be identified by a one-dimensional, two-dimensional, or three-dimensional unique index accessible within the kernel through the built-in blockIdx variable. The dimension of the thread block is accessible within the kernel through the built-in blockDim variable.
Extending the previous MatAdd() example to handle multiple blocks, the code becomes as follows.
// Kernel definition
__global__ void MatAdd(float A[N][N], float B[N][N],
float C[N][N])
{
int i = blockIdx.x * blockDim.x + threadIdx.x;
int j = blockIdx.y * blockDim.y + threadIdx.y;
if (i < N && j < N)
C[i][j] = A[i][j] + B[i][j];
}
int main()
{
...
// Kernel invocation
dim3 threadsPerBlock(16, 16);
dim3 numBlocks(N / threadsPerBlock.x, N / threadsPerBlock.y);
MatAdd<<<numBlocks, threadsPerBlock>>>(A, B, C);
...
}
A thread block size of 16x16 (256 threads), although arbitrary in this case, is a common choice. The grid is created with enough blocks to have one thread per matrix element as before. For simplicity, this example assumes that the number of threads per grid in each dimension is evenly divisible by the number of threads per block in that dimension, although that need not be the case.
Thread blocks are required to execute independently: It must be possible to execute them in any order, in parallel or in series. This independence requirement allows thread blocks to be scheduled in any order across any number of cores as illustrated by Figure 3, enabling programmers to write code that scales with the number of cores.
Threads within a block can cooperate by sharing data through some shared memory and by synchronizing their execution to coordinate memory accesses. More precisely, one can specify synchronization points in the kernel by calling the __syncthreads() intrinsic function; __syncthreads() acts as a barrier at which all threads in the block must wait before any is allowed to proceed. Shared Memory gives an example of using shared memory. In addition to __syncthreads(), the Cooperative Groups API provides a rich set of thread-synchronization primitives.
For efficient cooperation, the shared memory is expected to be a low-latency memory near each processor core (much like an L1 cache) and __syncthreads() is expected to be lightweight.
2.2.1. Thread Block Clusters
With the introduction of NVIDIA Compute Capability 9.0, the CUDA programming model introduces an optional level of hierarchy called Thread Block Clusters that are made up of thread blocks. Similar to how threads in a thread block are guaranteed to be co-scheduled on a streaming multiprocessor, thread blocks in a cluster are also guaranteed to be co-scheduled on a GPU Processing Cluster (GPC) in the GPU.
Similar to thread blocks, clusters are also organized into a one-dimension, two-dimension, or three-dimension as illustrated by Grid of Thread Block Clusters. The number of thread blocks in a cluster can be user-defined, and a maximum of 8 thread blocks in a cluster is supported as a portable cluster size in CUDA.
Note that on GPU hardware or MIG configurations which are too small to support 8 multiprocessors the maximum cluster size will be reduced accordingly. Identification of these smaller configurations, as well as of larger configurations supporting a thread block cluster size beyond 8, is architecture-specific and can be queried using the cudaOccupancyMaxPotentialClusterSize API.
Figure 5 Grid of Thread Block Clusters
Note
In a kernel launched using cluster support, the gridDim variable still denotes the size in terms of number of thread blocks, for compatibility purposes. The rank of a block in a cluster can be found using the Cluster Group API.
A thread block cluster can be enabled in a kernel either using a compiler time kernel attribute using __cluster_dims__(X,Y,Z) or using the CUDA kernel launch API cudaLaunchKernelEx. The example below shows how to launch a cluster using compiler time kernel attribute. The cluster size using kernel attribute is fixed at compile time and then the kernel can be launched using the classical <<< , >>>. If a kernel uses compile-time cluster size, the cluster size cannot be modified when launching the kernel.
// Kernel definition
// Compile time cluster size 2 in X-dimension and 1 in Y and Z dimension
__global__ void __cluster_dims__(2, 1, 1) cluster_kernel(float *input, float* output)
{
}
int main()
{
float *input, *output;
// Kernel invocation with compile time cluster size
dim3 threadsPerBlock(16, 16);
dim3 numBlocks(N / threadsPerBlock.x, N / threadsPerBlock.y);
// The grid dimension is not affected by cluster launch, and is still enumerated
// using number of blocks.
// The grid dimension must be a multiple of cluster size.
cluster_kernel<<<numBlocks, threadsPerBlock>>>(input, output);
}
A thread block cluster size can also be set at runtime and the kernel can be launched using the CUDA kernel launch API cudaLaunchKernelEx. The code example below shows how to launch a cluster kernel using the extensible API.
// Kernel definition
// No compile time attribute attached to the kernel
__global__ void cluster_kernel(float *input, float* output)
{
}
int main()
{
float *input, *output;
dim3 threadsPerBlock(16, 16);
dim3 numBlocks(N / threadsPerBlock.x, N / threadsPerBlock.y);
// Kernel invocation with runtime cluster size
{
cudaLaunchConfig_t config = {0};
// The grid dimension is not affected by cluster launch, and is still enumerated
// using number of blocks.
// The grid dimension should be a multiple of cluster size.
config.gridDim = numBlocks;
config.blockDim = threadsPerBlock;
cudaLaunchAttribute attribute[1];
attribute[0].id = cudaLaunchAttributeClusterDimension;
attribute[0].val.clusterDim.x = 2; // Cluster size in X-dimension
attribute[0].val.clusterDim.y = 1;
attribute[0].val.clusterDim.z = 1;
config.attrs = attribute;
config.numAttrs = 1;
cudaLaunchKernelEx(&config, cluster_kernel, input, output);
}
}
In GPUs with compute capability 9.0, all the thread blocks in the cluster are guaranteed to be co-scheduled on a single GPU Processing Cluster (GPC) and allow thread blocks in the cluster to perform hardware-supported synchronization using the Cluster Group API cluster.sync(). Cluster group also provides member functions to query cluster group size in terms of number of threads or number of blocks using num_threads() and num_blocks() API respectively. The rank of a thread or block in the cluster group can be queried using dim_threads() and dim_blocks() API respectively.
Thread blocks that belong to a cluster have access to the Distributed Shared Memory. Thread blocks in a cluster have the ability to read, write, and perform atomics to any address in the distributed shared memory. Distributed Shared Memory gives an example of performing histograms in distributed shared memory.
2.3. Memory Hierarchy
CUDA threads may access data from multiple memory spaces during their execution as illustrated by Figure 6. Each thread has private local memory. Each thread block has shared memory visible to all threads of the block and with the same lifetime as the block. Thread blocks in a thread block cluster can perform read, write, and atomics operations on each other’s shared memory. All threads have access to the same global memory.
There are also two additional read-only memory spaces accessible by all threads: the constant and texture memory spaces. The global, constant, and texture memory spaces are optimized for different memory usages (see Device Memory Accesses). Texture memory also offers different addressing modes, as well as data filtering, for some specific data formats (see Texture and Surface Memory).
The global, constant, and texture memory spaces are persistent across kernel launches by the same application.
Figure 6 Memory Hierarchy
2.4. Heterogeneous Programming
As illustrated by Figure 7, the CUDA programming model assumes that the CUDA threads execute on a physically separate device that operates as a coprocessor to the host running the C++ program. This is the case, for example, when the kernels execute on a GPU and the rest of the C++ program executes on a CPU.
The CUDA programming model also assumes that both the host and the device maintain their own separate memory spaces in DRAM, referred to as host memory and device memory, respectively. Therefore, a program manages the global, constant, and texture memory spaces visible to kernels through calls to the CUDA runtime (described in Programming Interface). This includes device memory allocation and deallocation as well as data transfer between host and device memory.
Unified Memory provides managed memory to bridge the host and device memory spaces. Managed memory is accessible from all CPUs and GPUs in the system as a single, coherent memory image with a common address space. This capability enables oversubscription of device memory and can greatly simplify the task of porting applications by eliminating the need to explicitly mirror data on host and device. See Unified Memory Programming for an introduction to Unified Memory.
Figure 7 Heterogeneous Programming
Note
Serial code executes on the host while parallel code executes on the device.
2.5. Asynchronous SIMT Programming Model
In the CUDA programming model a thread is the lowest level of abstraction for doing a computation or a memory operation. Starting with devices based on the NVIDIA Ampere GPU architecture, the CUDA programming model provides acceleration to memory operations via the asynchronous programming model. The asynchronous programming model defines the behavior of asynchronous operations with respect to CUDA threads.
The asynchronous programming model defines the behavior of Asynchronous Barrier for synchronization between CUDA threads. The model also explains and defines how cuda::memcpy_async can be used to move data asynchronously from global memory while computing in the GPU.
2.5.1. Asynchronous Operations
An asynchronous operation is defined as an operation that is initiated by a CUDA thread and is executed asynchronously as-if by another thread. In a well formed program one or more CUDA threads synchronize with the asynchronous operation. The CUDA thread that initiated the asynchronous operation is not required to be among the synchronizing threads.
Such an asynchronous thread (an as-if thread) is always associated with the CUDA thread that initiated the asynchronous operation. An asynchronous operation uses a synchronization object to synchronize the completion of the operation. Such a synchronization object can be explicitly managed by a user (e.g., cuda::memcpy_async) or implicitly managed within a library (e.g., cooperative_groups::memcpy_async).
A synchronization object could be a cuda::barrier or a cuda::pipeline. These objects are explained in detail in Asynchronous Barrier and Asynchronous Data Copies using cuda::pipeline. These synchronization objects can be used at different thread scopes. A scope defines the set of threads that may use the synchronization object to synchronize with the asynchronous operation. The following table defines the thread scopes available in CUDA C++ and the threads that can be synchronized with each.
Thread Scope |
Description |
|---|---|
|
Only the CUDA thread which initiated asynchronous operations synchronizes. |
|
All or any CUDA threads within the same thread block as the initiating thread synchronizes. |
|
All or any CUDA threads in the same GPU device as the initiating thread synchronizes. |
|
All or any CUDA or CPU threads in the same system as the initiating thread synchronizes. |
These thread scopes are implemented as extensions to standard C++ in the CUDA Standard C++ library.
2.6. Compute Capability
The compute capability of a device is represented by a version number, also sometimes called its “SM version”. This version number identifies the features supported by the GPU hardware and is used by applications at runtime to determine which hardware features and/or instructions are available on the present GPU.
The compute capability comprises a major revision number X and a minor revision number Y and is denoted by X.Y.
Devices with the same major revision number are of the same core architecture. The major revision number is 9 for devices based on the NVIDIA Hopper GPU architecture, 8 for devices based on the NVIDIA Ampere GPU architecture, 7 for devices based on the Volta architecture, 6 for devices based on the Pascal architecture, 5 for devices based on the Maxwell architecture, and 3 for devices based on the Kepler architecture.
The minor revision number corresponds to an incremental improvement to the core architecture, possibly including new features.
Turing is the architecture for devices of compute capability 7.5, and is an incremental update based on the Volta architecture.
CUDA-Enabled GPUs lists of all CUDA-enabled devices along with their compute capability. Compute Capabilities gives the technical specifications of each compute capability.
Note
The compute capability version of a particular GPU should not be confused with the CUDA version (for example, CUDA 7.5, CUDA 8, CUDA 9), which is the version of the CUDA software platform. The CUDA platform is used by application developers to create applications that run on many generations of GPU architectures, including future GPU architectures yet to be invented. While new versions of the CUDA platform often add native support for a new GPU architecture by supporting the compute capability version of that architecture, new versions of the CUDA platform typically also include software features that are independent of hardware generation.
The Tesla and Fermi architectures are no longer supported starting with CUDA 7.0 and CUDA 9.0, respectively.
3. Programming Interface
CUDA C++ provides a simple path for users familiar with the C++ programming language to easily write programs for execution by the device.
It consists of a minimal set of extensions to the C++ language and a runtime library.
The core language extensions have been introduced in Programming Model. They allow programmers to define a kernel as a C++ function and use some new syntax to specify the grid and block dimension each time the function is called. A complete description of all extensions can be found in C++ Language Extensions. Any source file that contains some of these extensions must be compiled with nvcc as outlined in Compilation with NVCC.
The runtime is introduced in CUDA Runtime. It provides C and C++ functions that execute on the host to allocate and deallocate device memory, transfer data between host memory and device memory, manage systems with multiple devices, etc. A complete description of the runtime can be found in the CUDA reference manual.
The runtime is built on top of a lower-level C API, the CUDA driver API, which is also accessible by the application. The driver API provides an additional level of control by exposing lower-level concepts such as CUDA contexts - the analogue of host processes for the device - and CUDA modules - the analogue of dynamically loaded libraries for the device. Most applications do not use the driver API as they do not need this additional level of control and when using the runtime, context and module management are implicit, resulting in more concise code. As the runtime is interoperable with the driver API, most applications that need some driver API features can default to use the runtime API and only use the driver API where needed. The driver API is introduced in Driver API and fully described in the reference manual.
3.1. Compilation with NVCC
Kernels can be written using the CUDA instruction set architecture, called PTX, which is described in the PTX reference manual. It is however usually more effective to use a high-level programming language such as C++. In both cases, kernels must be compiled into binary code by nvcc to execute on the device.
nvcc is a compiler driver that simplifies the process of compiling C++ or PTX code: It provides simple and familiar command line options and executes them by invoking the collection of tools that implement the different compilation stages. This section gives an overview of nvcc workflow and command options. A complete description can be found in the nvcc user manual.
3.1.1. Compilation Workflow
3.1.1.1. Offline Compilation
Source files compiled with nvcc can include a mix of host code (i.e., code that executes on the host) and device code (i.e., code that executes on the device). nvcc’s basic workflow consists in separating device code from host code and then:
compiling the device code into an assembly form (PTX code) and/or binary form (cubin object),
and modifying the host code by replacing the
<<<...>>>syntax introduced in Kernels (and described in more details in Execution Configuration) by the necessary CUDA runtime function calls to load and launch each compiled kernel from the PTX code and/or cubin object.
The modified host code is output either as C++ code that is left to be compiled using another tool or as object code directly by letting nvcc invoke the host compiler during the last compilation stage.
Applications can then:
Either link to the compiled host code (this is the most common case),
Or ignore the modified host code (if any) and use the CUDA driver API (see Driver API) to load and execute the PTX code or cubin object.
3.1.1.2. Just-in-Time Compilation
Any PTX code loaded by an application at runtime is compiled further to binary code by the device driver. This is called just-in-time compilation. Just-in-time compilation increases application load time, but allows the application to benefit from any new compiler improvements coming with each new device driver. It is also the only way for applications to run on devices that did not exist at the time the application was compiled, as detailed in Application Compatibility.
When the device driver just-in-time compiles some PTX code for some application, it automatically caches a copy of the generated binary code in order to avoid repeating the compilation in subsequent invocations of the application. The cache - referred to as compute cache - is automatically invalidated when the device driver is upgraded, so that applications can benefit from the improvements in the new just-in-time compiler built into the device driver.
Environment variables are available to control just-in-time compilation as described in CUDA Environment Variables
As an alternative to using nvcc to compile CUDA C++ device code, NVRTC can be used to compile CUDA C++ device code to PTX at runtime. NVRTC is a runtime compilation library for CUDA C++; more information can be found in the NVRTC User guide.
3.1.2. Binary Compatibility
Binary code is architecture-specific. A cubin object is generated using the compiler option -code that specifies the targeted architecture: For example, compiling with -code=sm_80 produces binary code for devices of compute capability 8.0. Binary compatibility is guaranteed from one minor revision to the next one, but not from one minor revision to the previous one or across major revisions. In other words, a cubin object generated for compute capability X.y will only execute on devices of compute capability X.z where z≥y.
Note
Binary compatibility is supported only for the desktop. It is not supported for Tegra. Also, the binary compatibility between desktop and Tegra is not supported.
3.1.3. PTX Compatibility
Some PTX instructions are only supported on devices of higher compute capabilities. For example, Warp Shuffle Functions are only supported on devices of compute capability 5.0 and above. The -arch compiler option specifies the compute capability that is assumed when compiling C++ to PTX code. So, code that contains warp shuffle, for example, must be compiled with -arch=compute_50 (or higher).
PTX code produced for some specific compute capability can always be compiled to binary code of greater or equal compute capability. Note that a binary compiled from an earlier PTX version may not make use of some hardware features. For example, a binary targeting devices of compute capability 7.0 (Volta) compiled from PTX generated for compute capability 6.0 (Pascal) will not make use of Tensor Core instructions, since these were not available on Pascal. As a result, the final binary may perform worse than would be possible if the binary were generated using the latest version of PTX.
PTX code compiled to target architecture conditional features only run on the exact same physical architecture and nowhere else. Arch conditional PTX code is not forward and backward compatible.
Example code compiled with sm_90a or compute_90a only runs on devices with compute capability 9.0 and is not backward or forward compatible.
3.1.4. Application Compatibility
To execute code on devices of specific compute capability, an application must load binary or PTX code that is compatible with this compute capability as described in Binary Compatibility and PTX Compatibility. In particular, to be able to execute code on future architectures with higher compute capability (for which no binary code can be generated yet), an application must load PTX code that will be just-in-time compiled for these devices (see Just-in-Time Compilation).
Which PTX and binary code gets embedded in a CUDA C++ application is controlled by the -arch and -code compiler options or the -gencode compiler option as detailed in the nvcc user manual. For example,
nvcc x.cu
-gencode arch=compute_50,code=sm_50
-gencode arch=compute_60,code=sm_60
-gencode arch=compute_70,code=\"compute_70,sm_70\"
embeds binary code compatible with compute capability 5.0 and 6.0 (first and second -gencode options) and PTX and binary code compatible with compute capability 7.0 (third -gencode option).
Host code is generated to automatically select at runtime the most appropriate code to load and execute, which, in the above example, will be:
5.0 binary code for devices with compute capability 5.0 and 5.2,
6.0 binary code for devices with compute capability 6.0 and 6.1,
7.0 binary code for devices with compute capability 7.0 and 7.5,
PTX code which is compiled to binary code at runtime for devices with compute capability 8.0 and 8.6.
x.cu can have an optimized code path that uses warp reduction operations, for example, which are only supported in devices of compute capability 8.0 and higher. The __CUDA_ARCH__ macro can be used to differentiate various code paths based on compute capability. It is only defined for device code. When compiling with -arch=compute_80 for example, __CUDA_ARCH__ is equal to 800.
If x.cu is compiled for architecture conditional features example with sm_90a or compute_90a, the code can only run on devices with compute capability 9.0.
Applications using the driver API must compile code to separate files and explicitly load and execute the most appropriate file at runtime.
The Volta architecture introduces Independent Thread Scheduling which changes the way threads are scheduled on the GPU. For code relying on specific behavior of SIMT scheduling in previous architectures, Independent Thread Scheduling may alter the set of participating threads, leading to incorrect results. To aid migration while implementing the corrective actions detailed in Independent Thread Scheduling, Volta developers can opt-in to Pascal’s thread scheduling with the compiler option combination -arch=compute_60 -code=sm_70.
The nvcc user manual lists various shorthands for the -arch, -code, and -gencode compiler options. For example, -arch=sm_70 is a shorthand for -arch=compute_70 -code=compute_70,sm_70 (which is the same as -gencode arch=compute_70,code=\"compute_70,sm_70\").
3.1.5. C++ Compatibility
The front end of the compiler processes CUDA source files according to C++ syntax rules. Full C++ is supported for the host code. However, only a subset of C++ is fully supported for the device code as described in C++ Language Support.
3.1.6. 64-Bit Compatibility
The 64-bit version of nvcc compiles device code in 64-bit mode (i.e., pointers are 64-bit). Device code compiled in 64-bit mode is only supported with host code compiled in 64-bit mode.
3.2. CUDA Runtime
The runtime is implemented in the cudart library, which is linked to the application, either statically via cudart.lib or libcudart.a, or dynamically via cudart.dll or libcudart.so. Applications that require cudart.dll and/or cudart.so for dynamic linking typically include them as part of the application installation package. It is only safe to pass the address of CUDA runtime symbols between components that link to the same instance of the CUDA runtime.
All its entry points are prefixed with cuda.
As mentioned in Heterogeneous Programming, the CUDA programming model assumes a system composed of a host and a device, each with their own separate memory. Device Memory gives an overview of the runtime functions used to manage device memory.
Shared Memory illustrates the use of shared memory, introduced in Thread Hierarchy, to maximize performance.
Page-Locked Host Memory introduces page-locked host memory that is required to overlap kernel execution with data transfers between host and device memory.
Asynchronous Concurrent Execution describes the concepts and API used to enable asynchronous concurrent execution at various levels in the system.
Multi-Device System shows how the programming model extends to a system with multiple devices attached to the same host.
Error Checking describes how to properly check the errors generated by the runtime.
Call Stack mentions the runtime functions used to manage the CUDA C++ call stack.
Texture and Surface Memory presents the texture and surface memory spaces that provide another way to access device memory; they also expose a subset of the GPU texturing hardware.
Graphics Interoperability introduces the various functions the runtime provides to interoperate with the two main graphics APIs, OpenGL and Direct3D.
3.2.1. Initialization
As of CUDA 12.0, the cudaInitDevice() and cudaSetDevice() calls initialize the runtime and the primary context
associated with the specified device. Absent these calls, the runtime will implicitly use device 0 and self-initialize
as needed to process other runtime API requests. One needs to keep this in mind when timing runtime function calls and
when interpreting the error code from the first call into the runtime. Before 12.0, cudaSetDevice() would not
initialize the runtime and applications would often use the no-op runtime call cudaFree(0) to isolate the runtime
initialization from other api activity (both for the sake of timing and error handling).
The runtime creates a CUDA context for each device in the system (see Context for more details on CUDA contexts). This context is the primary context for this device and is initialized at the first runtime function which requires an active context on this device. It is shared among all the host threads of the application. As part of this context creation, the device code is just-in-time compiled if necessary (see Just-in-Time Compilation) and loaded into device memory. This all happens transparently. If needed, for example, for driver API interoperability, the primary context of a device can be accessed from the driver API as described in Interoperability between Runtime and Driver APIs.
When a host thread calls cudaDeviceReset(), this destroys the primary context of the device the host thread currently
operates on (that is, the current device as defined in Device Selection). The next runtime function call made by any
host thread that has this device as current will create a new primary context for this device.
Note
The CUDA interfaces use global state that is initialized during host program initiation and destroyed during host program termination. The CUDA runtime and driver cannot detect if this state is invalid, so using any of these interfaces (implicitly or explicitly) during program initiation or termination after main) will result in undefined behavior.
As of CUDA 12.0, cudaSetDevice() will now explicitly initialize the runtime after changing the current device for the host thread. Previous versions of CUDA delayed runtime initialization on the new device until the first runtime call was made after cudaSetDevice(). This change means that it is now very important to check the return value of cudaSetDevice() for initialization errors.
The runtime functions from the error handling and version management sections of the reference manual do not initialize the runtime.
3.2.2. Device Memory
As mentioned in Heterogeneous Programming, the CUDA programming model assumes a system composed of a host and a device, each with their own separate memory. Kernels operate out of device memory, so the runtime provides functions to allocate, deallocate, and copy device memory, as well as transfer data between host memory and device memory.
Device memory can be allocated either as linear memory or as CUDA arrays.
CUDA arrays are opaque memory layouts optimized for texture fetching. They are described in Texture and Surface Memory.
Linear memory is allocated in a single unified address space, which means that separately allocated entities can reference one another via pointers, for example, in a binary tree or linked list. The size of the address space depends on the host system (CPU) and the compute capability of the used GPU:
x86_64 (AMD64) |
POWER (ppc64le) |
ARM64 |
|
|---|---|---|---|
up to compute capability 5.3 (Maxwell) |
40bit |
40bit |
40bit |
compute capability 6.0 (Pascal) or newer |
up to 47bit |
up to 49bit |
up to 48bit |
Note
On devices of compute capability 5.3 (Maxwell) and earlier, the CUDA driver creates an uncommitted 40bit virtual address reservation to ensure that memory allocations (pointers) fall into the supported range. This reservation appears as reserved virtual memory, but does not occupy any physical memory until the program actually allocates memory.
Linear memory is typically allocated using cudaMalloc() and freed using cudaFree() and data transfer between host memory and device memory are typically done using cudaMemcpy(). In the vector addition code sample of Kernels, the vectors need to be copied from host memory to device memory:
// Device code
__global__ void VecAdd(float* A, float* B, float* C, int N)
{
int i = blockDim.x * blockIdx.x + threadIdx.x;
if (i < N)
C[i] = A[i] + B[i];
}
// Host code
int main()
{
int N = ...;
size_t size = N * sizeof(float);
// Allocate input vectors h_A and h_B in host memory
float* h_A = (float*)malloc(size);
float* h_B = (float*)malloc(size);
float* h_C = (float*)malloc(size);
// Initialize input vectors
...
// Allocate vectors in device memory
float* d_A;
cudaMalloc(&d_A, size);
float* d_B;
cudaMalloc(&d_B, size);
float* d_C;
cudaMalloc(&d_C, size);
// Copy vectors from host memory to device memory
cudaMemcpy(d_A, h_A, size, cudaMemcpyHostToDevice);
cudaMemcpy(d_B, h_B, size, cudaMemcpyHostToDevice);
// Invoke kernel
int threadsPerBlock = 256;
int blocksPerGrid =
(N + threadsPerBlock - 1) / threadsPerBlock;
VecAdd<<<blocksPerGrid, threadsPerBlock>>>(d_A, d_B, d_C, N);
// Copy result from device memory to host memory
// h_C contains the result in host memory
cudaMemcpy(h_C, d_C, size, cudaMemcpyDeviceToHost);
// Free device memory
cudaFree(d_A);
cudaFree(d_B);
cudaFree(d_C);
// Free host memory
...
}
Linear memory can also be allocated through cudaMallocPitch() and cudaMalloc3D(). These functions are recommended for allocations of 2D or 3D arrays as it makes sure that the allocation is appropriately padded to meet the alignment requirements described in Device Memory Accesses, therefore ensuring best performance when accessing the row addresses or performing copies between 2D arrays and other regions of device memory (using the cudaMemcpy2D() and cudaMemcpy3D() functions). The returned pitch (or stride) must be used to access array elements. The following code sample allocates a width x height 2D array of floating-point values and shows how to loop over the array elements in device code:
// Host code
int width = 64, height = 64;
float* devPtr;
size_t pitch;
cudaMallocPitch(&devPtr, &pitch,
width * sizeof(float), height);
MyKernel<<<100, 512>>>(devPtr, pitch, width, height);
// Device code
__global__ void MyKernel(float* devPtr,
size_t pitch, int width, int height)
{
for (int r = 0; r < height; ++r) {
float* row = (float*)((char*)devPtr + r * pitch);
for (int c = 0; c < width; ++c) {
float element = row[c];
}
}
}
The following code sample allocates a width x height x depth 3D array of floating-point values and shows how to loop over the array elements in device code:
// Host code
int width = 64, height = 64, depth = 64;
cudaExtent extent = make_cudaExtent(width * sizeof(float),
height, depth);
cudaPitchedPtr devPitchedPtr;
cudaMalloc3D(&devPitchedPtr, extent);
MyKernel<<<100, 512>>>(devPitchedPtr, width, height, depth);
// Device code
__global__ void MyKernel(cudaPitchedPtr devPitchedPtr,
int width, int height, int depth)
{
char* devPtr = devPitchedPtr.ptr;
size_t pitch = devPitchedPtr.pitch;
size_t slicePitch = pitch * height;
for (int z = 0; z < depth; ++z) {
char* slice = devPtr + z * slicePitch;
for (int y = 0; y < height; ++y) {
float* row = (float*)(slice + y * pitch);
for (int x = 0; x < width; ++x) {
float element = row[x];
}
}
}
}
Note
To avoid allocating too much memory and thus impacting system-wide performance, request the allocation parameters from the user based on the problem size. If the allocation fails, you can fallback to other slower memory types (cudaMallocHost(), cudaHostRegister(), etc.), or return an error telling the user how much memory was needed that was denied. If your application cannot request the allocation parameters for some reason, we recommend using cudaMallocManaged() for platforms that support it.
The reference manual lists all the various functions used to copy memory between linear memory allocated with cudaMalloc(), linear memory allocated with cudaMallocPitch() or cudaMalloc3D(), CUDA arrays, and memory allocated for variables declared in global or constant memory space.
The following code sample illustrates various ways of accessing global variables via the runtime API:
__constant__ float constData[256];
float data[256];
cudaMemcpyToSymbol(constData, data, sizeof(data));
cudaMemcpyFromSymbol(data, constData, sizeof(data));
__device__ float devData;
float value = 3.14f;
cudaMemcpyToSymbol(devData, &value, sizeof(float));
__device__ float* devPointer;
float* ptr;
cudaMalloc(&ptr, 256 * sizeof(float));
cudaMemcpyToSymbol(devPointer, &ptr, sizeof(ptr));
cudaGetSymbolAddress() is used to retrieve the address pointing to the memory allocated for a variable declared in global memory space. The size of the allocated memory is obtained through cudaGetSymbolSize().
3.2.3. Device Memory L2 Access Management
When a CUDA kernel accesses a data region in the global memory repeatedly, such data accesses can be considered to be persisting. On the other hand, if the data is only accessed once, such data accesses can be considered to be streaming.
Starting with CUDA 11.0, devices of compute capability 8.0 and above have the capability to influence persistence of data in the L2 cache, potentially providing higher bandwidth and lower latency accesses to global memory.
3.2.3.1. L2 Cache Set-Aside for Persisting Accesses
A portion of the L2 cache can be set aside to be used for persisting data accesses to global memory. Persisting accesses have prioritized use of this set-aside portion of L2 cache, whereas normal or streaming, accesses to global memory can only utilize this portion of L2 when it is unused by persisting accesses.
The L2 cache set-aside size for persisting accesses may be adjusted, within limits:
cudaGetDeviceProperties(&prop, device_id);
size_t size = min(int(prop.l2CacheSize * 0.75), prop.persistingL2CacheMaxSize);
cudaDeviceSetLimit(cudaLimitPersistingL2CacheSize, size); /* set-aside 3/4 of L2 cache for persisting accesses or the max allowed*/
When the GPU is configured in Multi-Instance GPU (MIG) mode, the L2 cache set-aside functionality is disabled.
When using the Multi-Process Service (MPS), the L2 cache set-aside size cannot be changed by cudaDeviceSetLimit. Instead, the set-aside size can only be specified at start up of MPS server through the environment variable CUDA_DEVICE_DEFAULT_PERSISTING_L2_CACHE_PERCENTAGE_LIMIT.
3.2.3.2. L2 Policy for Persisting Accesses
An access policy window specifies a contiguous region of global memory and a persistence property in the L2 cache for accesses within that region.
The code example below shows how to set an L2 persisting access window using a CUDA Stream.
CUDA Stream Example
cudaStreamAttrValue stream_attribute; // Stream level attributes data structure
stream_attribute.accessPolicyWindow.base_ptr = reinterpret_cast<void*>(ptr); // Global Memory data pointer
stream_attribute.accessPolicyWindow.num_bytes = num_bytes; // Number of bytes for persistence access.
// (Must be less than cudaDeviceProp::accessPolicyMaxWindowSize)
stream_attribute.accessPolicyWindow.hitRatio = 0.6; // Hint for cache hit ratio
stream_attribute.accessPolicyWindow.hitProp = cudaAccessPropertyPersisting; // Type of access property on cache hit
stream_attribute.accessPolicyWindow.missProp = cudaAccessPropertyStreaming; // Type of access property on cache miss.
//Set the attributes to a CUDA stream of type cudaStream_t
cudaStreamSetAttribute(stream, cudaStreamAttributeAccessPolicyWindow, &stream_attribute);
When a kernel subsequently executes in CUDA stream, memory accesses within the global memory extent [ptr..ptr+num_bytes) are more likely to persist in the L2 cache than accesses to other global memory locations.
L2 persistence can also be set for a CUDA Graph Kernel Node as shown in the example below:
CUDA GraphKernelNode Example
cudaKernelNodeAttrValue node_attribute; // Kernel level attributes data structure
node_attribute.accessPolicyWindow.base_ptr = reinterpret_cast<void*>(ptr); // Global Memory data pointer
node_attribute.accessPolicyWindow.num_bytes = num_bytes; // Number of bytes for persistence access.
// (Must be less than cudaDeviceProp::accessPolicyMaxWindowSize)
node_attribute.accessPolicyWindow.hitRatio = 0.6; // Hint for cache hit ratio
node_attribute.accessPolicyWindow.hitProp = cudaAccessPropertyPersisting; // Type of access property on cache hit
node_attribute.accessPolicyWindow.missProp = cudaAccessPropertyStreaming; // Type of access property on cache miss.
//Set the attributes to a CUDA Graph Kernel node of type cudaGraphNode_t
cudaGraphKernelNodeSetAttribute(node, cudaKernelNodeAttributeAccessPolicyWindow, &node_attribute);
The hitRatio parameter can be used to specify the fraction of accesses that receive the hitProp property. In both of the examples above, 60% of the memory accesses in the global memory region [ptr..ptr+num_bytes) have the persisting property and 40% of the memory accesses have the streaming property. Which specific memory accesses are classified as persisting (the hitProp) is random with a probability of approximately hitRatio; the probability distribution depends upon the hardware architecture and the memory extent.
For example, if the L2 set-aside cache size is 16KB and the num_bytes in the accessPolicyWindow is 32KB:
With a
hitRatioof 0.5, the hardware will select, at random, 16KB of the 32KB window to be designated as persisting and cached in the set-aside L2 cache area.With a
hitRatioof 1.0, the hardware will attempt to cache the whole 32KB window in the set-aside L2 cache area. Since the set-aside area is smaller than the window, cache lines will be evicted to keep the most recently used 16KB of the 32KB data in the set-aside portion of the L2 cache.
The hitRatio can therefore be used to avoid thrashing of cache lines and overall reduce the amount of data moved into and out of the L2 cache.
A hitRatio value below 1.0 can be used to manually control the amount of data different accessPolicyWindows from concurrent CUDA streams can cache in L2. For example, let the L2 set-aside cache size be 16KB; two concurrent kernels in two different CUDA streams, each with a 16KB accessPolicyWindow, and both with hitRatio value 1.0, might evict each others’ cache lines when competing for the shared L2 resource. However, if both accessPolicyWindows have a hitRatio value of 0.5, they will be less likely to evict their own or each others’ persisting cache lines.
3.2.3.3. L2 Access Properties
Three types of access properties are defined for different global memory data accesses:
cudaAccessPropertyStreaming: Memory accesses that occur with the streaming property are less likely to persist in the L2 cache because these accesses are preferentially evicted.cudaAccessPropertyPersisting: Memory accesses that occur with the persisting property are more likely to persist in the L2 cache because these accesses are preferentially retained in the set-aside portion of L2 cache.cudaAccessPropertyNormal: This access property forcibly resets previously applied persisting access property to a normal status. Memory accesses with the persisting property from previous CUDA kernels may be retained in L2 cache long after their intended use. This persistence-after-use reduces the amount of L2 cache available to subsequent kernels that do not use the persisting property. Resetting an access property window with thecudaAccessPropertyNormalproperty removes the persisting (preferential retention) status of the prior access, as if the prior access had been without an access property.
3.2.3.4. L2 Persistence Example
The following example shows how to set-aside L2 cache for persistent accesses, use the set-aside L2 cache in CUDA kernels via CUDA Stream and then reset the L2 cache.
cudaStream_t stream;
cudaStreamCreate(&stream); // Create CUDA stream
cudaDeviceProp prop; // CUDA device properties variable
cudaGetDeviceProperties( &prop, device_id); // Query GPU properties
size_t size = min( int(prop.l2CacheSize * 0.75) , prop.persistingL2CacheMaxSize );
cudaDeviceSetLimit( cudaLimitPersistingL2CacheSize, size); // set-aside 3/4 of L2 cache for persisting accesses or the max allowed
size_t window_size = min(prop.accessPolicyMaxWindowSize, num_bytes); // Select minimum of user defined num_bytes and max window size.
cudaStreamAttrValue stream_attribute; // Stream level attributes data structure
stream_attribute.accessPolicyWindow.base_ptr = reinterpret_cast<void*>(data1); // Global Memory data pointer
stream_attribute.accessPolicyWindow.num_bytes = window_size; // Number of bytes for persistence access
stream_attribute.accessPolicyWindow.hitRatio = 0.6; // Hint for cache hit ratio
stream_attribute.accessPolicyWindow.hitProp = cudaAccessPropertyPersisting; // Persistence Property
stream_attribute.accessPolicyWindow.missProp = cudaAccessPropertyStreaming; // Type of access property on cache miss
cudaStreamSetAttribute(stream, cudaStreamAttributeAccessPolicyWindow, &stream_attribute); // Set the attributes to a CUDA Stream
for(int i = 0; i < 10; i++) {
cuda_kernelA<<<grid_size,block_size,0,stream>>>(data1); // This data1 is used by a kernel multiple times
} // [data1 + num_bytes) benefits from L2 persistence
cuda_kernelB<<<grid_size,block_size,0,stream>>>(data1); // A different kernel in the same stream can also benefit
// from the persistence of data1
stream_attribute.accessPolicyWindow.num_bytes = 0; // Setting the window size to 0 disable it
cudaStreamSetAttribute(stream, cudaStreamAttributeAccessPolicyWindow, &stream_attribute); // Overwrite the access policy attribute to a CUDA Stream
cudaCtxResetPersistingL2Cache(); // Remove any persistent lines in L2
cuda_kernelC<<<grid_size,block_size,0,stream>>>(data2); // data2 can now benefit from full L2 in normal mode
3.2.3.5. Reset L2 Access to Normal
A persisting L2 cache line from a previous CUDA kernel may persist in L2 long after it has been used. Hence, a reset to normal for L2 cache is important for streaming or normal memory accesses to utilize the L2 cache with normal priority. There are three ways a persisting access can be reset to normal status.
Reset a previous persisting memory region with the access property,
cudaAccessPropertyNormal.Reset all persisting L2 cache lines to normal by calling
cudaCtxResetPersistingL2Cache().Eventually untouched lines are automatically reset to normal. Reliance on automatic reset is strongly discouraged because of the undetermined length of time required for automatic reset to occur.
3.2.3.6. Manage Utilization of L2 set-aside cache
Multiple CUDA kernels executing concurrently in different CUDA streams may have a different access policy window assigned to their streams. However, the L2 set-aside cache portion is shared among all these concurrent CUDA kernels. As a result, the net utilization of this set-aside cache portion is the sum of all the concurrent kernels’ individual use. The benefits of designating memory accesses as persisting diminish as the volume of persisting accesses exceeds the set-aside L2 cache capacity.
To manage utilization of the set-aside L2 cache portion, an application must consider the following:
Size of L2 set-aside cache.
CUDA kernels that may concurrently execute.
The access policy window for all the CUDA kernels that may concurrently execute.
When and how L2 reset is required to allow normal or streaming accesses to utilize the previously set-aside L2 cache with equal priority.
3.2.3.7. Query L2 cache Properties
Properties related to L2 cache are a part of cudaDeviceProp struct and can be queried using CUDA runtime API cudaGetDeviceProperties
CUDA Device Properties include:
l2CacheSize: The amount of available L2 cache on the GPU.persistingL2CacheMaxSize: The maximum amount of L2 cache that can be set-aside for persisting memory accesses.accessPolicyMaxWindowSize: The maximum size of the access policy window.
3.2.3.8. Control L2 Cache Set-Aside Size for Persisting Memory Access
The L2 set-aside cache size for persisting memory accesses is queried using CUDA runtime API cudaDeviceGetLimit and set using CUDA runtime API cudaDeviceSetLimit as a cudaLimit. The maximum value for setting this limit is cudaDeviceProp::persistingL2CacheMaxSize.
enum cudaLimit {
/* other fields not shown */
cudaLimitPersistingL2CacheSize
};
3.2.4. Shared Memory
As detailed in Variable Memory Space Specifiers shared memory is allocated using the __shared__ memory space specifier.
Shared memory is expected to be much faster than global memory as mentioned in Thread Hierarchy and detailed in Shared Memory. It can be used as scratchpad memory (or software managed cache) to minimize global memory accesses from a CUDA block as illustrated by the following matrix multiplication example.
The following code sample is a straightforward implementation of matrix multiplication that does not take advantage of shared memory. Each thread reads one row of A and one column of B and computes the corresponding element of C as illustrated in Figure 8. A is therefore read B.width times from global memory and B is read A.height times.
// Matrices are stored in row-major order:
// M(row, col) = *(M.elements + row * M.width + col)
typedef struct {
int width;
int height;
float* elements;
} Matrix;
// Thread block size
#define BLOCK_SIZE 16
// Forward declaration of the matrix multiplication kernel
__global__ void MatMulKernel(const Matrix, const Matrix, Matrix);
// Matrix multiplication - Host code
// Matrix dimensions are assumed to be multiples of BLOCK_SIZE
void MatMul(const Matrix A, const Matrix B, Matrix C)
{
// Load A and B to device memory
Matrix d_A;
d_A.width = A.width; d_A.height = A.height;
size_t size = A.width * A.height * sizeof(float);
cudaMalloc(&d_A.elements, size);
cudaMemcpy(d_A.elements, A.elements, size,
cudaMemcpyHostToDevice);
Matrix d_B;
d_B.width = B.width; d_B.height = B.height;
size = B.width * B.height * sizeof(float);
cudaMalloc(&d_B.elements, size);
cudaMemcpy(d_B.elements, B.elements, size,
cudaMemcpyHostToDevice);
// Allocate C in device memory
Matrix d_C;
d_C.width = C.width; d_C.height = C.height;
size = C.width * C.height * sizeof(float);
cudaMalloc(&d_C.elements, size);
// Invoke kernel
dim3 dimBlock(BLOCK_SIZE, BLOCK_SIZE);
dim3 dimGrid(B.width / dimBlock.x, A.height / dimBlock.y);
MatMulKernel<<<dimGrid, dimBlock>>>(d_A, d_B, d_C);
// Read C from device memory
cudaMemcpy(C.elements, d_C.elements, size,
cudaMemcpyDeviceToHost);
// Free device memory
cudaFree(d_A.elements);
cudaFree(d_B.elements);
cudaFree(d_C.elements);
}
// Matrix multiplication kernel called by MatMul()
__global__ void MatMulKernel(Matrix A, Matrix B, Matrix C)
{
// Each thread computes one element of C
// by accumulating results into Cvalue
float Cvalue = 0;
int row = blockIdx.y * blockDim.y + threadIdx.y;
int col = blockIdx.x * blockDim.x + threadIdx.x;
for (int e = 0; e < A.width; ++e)
Cvalue += A.elements[row * A.width + e]
* B.elements[e * B.width + col];
C.elements[row * C.width + col] = Cvalue;
}
Figure 8 Matrix Multiplication without Shared Memory
The following code sample is an implementation of matrix multiplication that does take advantage of shared memory. In this implementation, each thread block is responsible for computing one square sub-matrix Csub of C and each thread within the block is responsible for computing one element of Csub. As illustrated in Figure 9, Csub is equal to the product of two rectangular matrices: the sub-matrix of A of dimension (A.width, block_size) that has the same row indices as Csub, and the sub-matrix of B of dimension (block_size, A.width )that has the same column indices as Csub. In order to fit into the device’s resources, these two rectangular matrices are divided into as many square matrices of dimension block_size as necessary and Csub is computed as the sum of the products of these square matrices. Each of these products is performed by first loading the two corresponding square matrices from global memory to shared memory with one thread loading one element of each matrix, and then by having each thread compute one element of the product. Each thread accumulates the result of each of these products into a register and once done writes the result to global memory.
By blocking the computation this way, we take advantage of fast shared memory and save a lot of global memory bandwidth since A is only read (B.width / block_size) times from global memory and B is read (A.height / block_size) times.
The Matrix type from the previous code sample is augmented with a stride field, so that sub-matrices can be efficiently represented with the same type. __device__ functions are used to get and set elements and build any sub-matrix from a matrix.
// Matrices are stored in row-major order:
// M(row, col) = *(M.elements + row * M.stride + col)
typedef struct {
int width;
int height;
int stride;
float* elements;
} Matrix;
// Get a matrix element
__device__ float GetElement(const Matrix A, int row, int col)
{
return A.elements[row * A.stride + col];
}
// Set a matrix element
__device__ void SetElement(Matrix A, int row, int col,
float value)
{
A.elements[row * A.stride + col] = value;
}
// Get the BLOCK_SIZExBLOCK_SIZE sub-matrix Asub of A that is
// located col sub-matrices to the right and row sub-matrices down
// from the upper-left corner of A
__device__ Matrix GetSubMatrix(Matrix A, int row, int col)
{
Matrix Asub;
Asub.width = BLOCK_SIZE;
Asub.height = BLOCK_SIZE;
Asub.stride = A.stride;
Asub.elements = &A.elements[A.stride * BLOCK_SIZE * row
+ BLOCK_SIZE * col];
return Asub;
}
// Thread block size
#define BLOCK_SIZE 16
// Forward declaration of the matrix multiplication kernel
__global__ void MatMulKernel(const Matrix, const Matrix, Matrix);
// Matrix multiplication - Host code
// Matrix dimensions are assumed to be multiples of BLOCK_SIZE
void MatMul(const Matrix A, const Matrix B, Matrix C)
{
// Load A and B to device memory
Matrix d_A;
d_A.width = d_A.stride = A.width; d_A.height = A.height;
size_t size = A.width * A.height * sizeof(float);
cudaMalloc(&d_A.elements, size);
cudaMemcpy(d_A.elements, A.elements, size,
cudaMemcpyHostToDevice);
Matrix d_B;
d_B.width = d_B.stride = B.width; d_B.height = B.height;
size = B.width * B.height * sizeof(float);
cudaMalloc(&d_B.elements, size);
cudaMemcpy(d_B.elements, B.elements, size,
cudaMemcpyHostToDevice);
// Allocate C in device memory
Matrix d_C;
d_C.width = d_C.stride = C.width; d_C.height = C.height;
size = C.width * C.height * sizeof(float);
cudaMalloc(&d_C.elements, size);
// Invoke kernel
dim3 dimBlock(BLOCK_SIZE, BLOCK_SIZE);
dim3 dimGrid(B.width / dimBlock.x, A.height / dimBlock.y);
MatMulKernel<<<dimGrid, dimBlock>>>(d_A, d_B, d_C);
// Read C from device memory
cudaMemcpy(C.elements, d_C.elements, size,
cudaMemcpyDeviceToHost);
// Free device memory
cudaFree(d_A.elements);
cudaFree(d_B.elements);
cudaFree(d_C.elements);
}
// Matrix multiplication kernel called by MatMul()
__global__ void MatMulKernel(Matrix A, Matrix B, Matrix C)
{
// Block row and column
int blockRow = blockIdx.y;
int blockCol = blockIdx.x;
// Each thread block computes one sub-matrix Csub of C
Matrix Csub = GetSubMatrix(C, blockRow, blockCol);
// Each thread computes one element of Csub
// by accumulating results into Cvalue
float Cvalue = 0;
// Thread row and column within Csub
int row = threadIdx.y;
int col = threadIdx.x;
// Loop over all the sub-matrices of A and B that are
// required to compute Csub
// Multiply each pair of sub-matrices together
// and accumulate the results
for (int m = 0; m < (A.width / BLOCK_SIZE); ++m) {
// Get sub-matrix Asub of A
Matrix Asub = GetSubMatrix(A, blockRow, m);
// Get sub-matrix Bsub of B
Matrix Bsub = GetSubMatrix(B, m, blockCol);
// Shared memory used to store Asub and Bsub respectively
__shared__ float As[BLOCK_SIZE][BLOCK_SIZE];
__shared__ float Bs[BLOCK_SIZE][BLOCK_SIZE];
// Load Asub and Bsub from device memory to shared memory
// Each thread loads one element of each sub-matrix
As[row][col] = GetElement(Asub, row, col);
Bs[row][col] = GetElement(Bsub, row, col);
// Synchronize to make sure the sub-matrices are loaded
// before starting the computation
__syncthreads();
// Multiply Asub and Bsub together
for (int e = 0; e < BLOCK_SIZE; ++e)
Cvalue += As[row][e] * Bs[e][col];
// Synchronize to make sure that the preceding
// computation is done before loading two new
// sub-matrices of A and B in the next iteration
__syncthreads();
}
// Write Csub to device memory
// Each thread writes one element
SetElement(Csub, row, col, Cvalue);
}
Figure 9 Matrix Multiplication with Shared Memory
3.2.6. Page-Locked Host Memory
The runtime provides functions to allow the use of page-locked (also known as pinned) host memory (as opposed to regular pageable host memory allocated by malloc()):
cudaHostAlloc()andcudaFreeHost()allocate and free page-locked host memory;cudaHostRegister()page-locks a range of memory allocated bymalloc()(see reference manual for limitations).
Using page-locked host memory has several benefits:
Copies between page-locked host memory and device memory can be performed concurrently with kernel execution for some devices as mentioned in Asynchronous Concurrent Execution.
On some devices, page-locked host memory can be mapped into the address space of the device, eliminating the need to copy it to or from device memory as detailed in Mapped Memory.
On systems with a front-side bus, bandwidth between host memory and device memory is higher if host memory is allocated as page-locked and even higher if in addition it is allocated as write-combining as described in Write-Combining Memory.
Note
Page-locked host memory is not cached on non I/O coherent Tegra devices. Also, cudaHostRegister() is not supported on non I/O coherent Tegra devices.
The simple zero-copy CUDA sample comes with a detailed document on the page-locked memory APIs.
3.2.6.1. Portable Memory
A block of page-locked memory can be used in conjunction with any device in the system (see Multi-Device System for more details on multi-device systems), but by default, the benefits of using page-locked memory described above are only available in conjunction with the device that was current when the block was allocated (and with all devices sharing the same unified address space, if any, as described in Unified Virtual Address Space). To make these advantages available to all devices, the block needs to be allocated by passing the flag cudaHostAllocPortable to cudaHostAlloc() or page-locked by passing the flag cudaHostRegisterPortable to cudaHostRegister().
3.2.6.2. Write-Combining Memory
By default page-locked host memory is allocated as cacheable. It can optionally be allocated as write-combining instead by passing flag cudaHostAllocWriteCombined to cudaHostAlloc(). Write-combining memory frees up the host’s L1 and L2 cache resources, making more cache available to the rest of the application. In addition, write-combining memory is not snooped during transfers across the PCI Express bus, which can improve transfer performance by up to 40%.
Reading from write-combining memory from the host is prohibitively slow, so write-combining memory should in general be used for memory that the host only writes to.
Using CPU atomic instructions on WC memory should be avoided because not all CPU implementations guarantee that functionality.
3.2.6.3. Mapped Memory
A block of page-locked host memory can also be mapped into the address space of the device by passing flag cudaHostAllocMapped to cudaHostAlloc() or by passing flag cudaHostRegisterMapped to cudaHostRegister(). Such a block has therefore in general two addresses: one in host memory that is returned by cudaHostAlloc() or malloc(), and one in device memory that can be retrieved using cudaHostGetDevicePointer() and then used to access the block from within a kernel. The only exception is for pointers allocated with cudaHostAlloc() and when a unified address space is used for the host and the device as mentioned in Unified Virtual Address Space.
Accessing host memory directly from within a kernel does not provide the same bandwidth as device memory, but does have some advantages:
There is no need to allocate a block in device memory and copy data between this block and the block in host memory; data transfers are implicitly performed as needed by the kernel;
There is no need to use streams (see Concurrent Data Transfers) to overlap data transfers with kernel execution; the kernel-originated data transfers automatically overlap with kernel execution.
Since mapped page-locked memory is shared between host and device however, the application must synchronize memory accesses using streams or events (see Asynchronous Concurrent Execution) to avoid any potential read-after-write, write-after-read, or write-after-write hazards.
To be able to retrieve the device pointer to any mapped page-locked memory, page-locked memory mapping must be enabled by calling cudaSetDeviceFlags() with the cudaDeviceMapHost flag before any other CUDA call is performed. Otherwise, cudaHostGetDevicePointer() will return an error.
cudaHostGetDevicePointer() also returns an error if the device does not support mapped page-locked host memory. Applications may query this capability by checking the canMapHostMemory device property (see Device Enumeration), which is equal to 1 for devices that support mapped page-locked host memory.
Note that atomic functions (see Atomic Functions) operating on mapped page-locked memory are not atomic from the point of view of the host or other devices.
Also note that CUDA runtime requires that 1-byte, 2-byte, 4-byte, 8-byte, and 16-byte naturally aligned loads and stores to host memory initiated from the device are preserved as single accesses from the point of view of the host and other devices. On some platforms, atomics to memory may be broken by the hardware into separate load and store operations. These component load and store operations have the same requirements on preservation of naturally aligned accesses. The CUDA runtime does not support a PCI Express bus topology where a PCI Express bridge splits 8-byte naturally aligned operations and NVIDIA is not aware of any topology that splits 16-byte naturally aligned operations.
3.2.7. Memory Synchronization Domains
3.2.7.1. Memory Fence Interference
Some CUDA applications may see degraded performance due to memory fence/flush operations waiting on more transactions than those necessitated by the CUDA memory consistency model.
__managed__ int x = 0;
__device__ cuda::atomic<int, cuda::thread_scope_device> a(0);
__managed__ cuda::atomic<int, cuda::thread_scope_system> b(0);
|
||
|
Thread 1 (SM) x = 1;
a = 1;
|
Thread 2 (SM) while (a != 1) ;
assert(x == 1);
b = 1;
|
Thread 3 (CPU) while (b != 1) ;
assert(x == 1);
|
Consider the example above. The CUDA memory consistency model guarantees that the asserted condition will be true, so the write to x from thread 1 must be visible to thread 3, before the write to b from thread 2.
The memory ordering provided by the release and acquire of a is only sufficient to make x visible to thread 2, not thread 3, as it is a device-scope operation. The system-scope ordering provided by release and acquire of b, therefore, needs to ensure not only writes issued from thread 2 itself are visible to thread 3, but also writes from other threads that are visible to thread 2. This is known as cumulativity. As the GPU cannot know at the time of execution which writes have been guaranteed at the source level to be visible and which are visible only by chance timing, it must cast a conservatively wide net for in-flight memory operations.
This sometimes leads to interference: because the GPU is waiting on memory operations it is not required to at the source level, the fence/flush may take longer than necessary.
Note that fences may occur explicitly as intrinsics or atomics in code, like in the example, or implicitly to implement synchronizes-with relationships at task boundaries.
A common example is when a kernel is performing computation in local GPU memory, and a parallel kernel (e.g. from NCCL) is performing communications with a peer. Upon completion, the local kernel will implicitly flush its writes to satisfy any synchronizes-with relationships to downstream work. This may unnecessarily wait, fully or partially, on slower nvlink or PCIe writes from the communication kernel.
3.2.7.2. Isolating Traffic with Domains
Beginning with Hopper architecture GPUs and CUDA 12.0, the memory synchronization domains feature provides a way to alleviate such interference. In exchange for explicit assistance from code, the GPU can reduce the net cast by a fence operation. Each kernel launch is given a domain ID. Writes and fences are tagged with the ID, and a fence will only order writes matching the fence’s domain. In the concurrent compute vs communication example, the communication kernels can be placed in a different domain.
When using domains, code must abide by the rule that ordering or synchronization between distinct domains on the same GPU requires system-scope fencing. Within a domain, device-scope fencing remains sufficient. This is necessary for cumulativity as one kernel’s writes will not be encompassed by a fence issued from a kernel in another domain. In essence, cumulativity is satisfied by ensuring that cross-domain traffic is flushed to the system scope ahead of time.
Note that this modifies the definition of thread_scope_device. However, because kernels will default to domain 0 as described below, backward compatibility is maintained.
3.2.7.3. Using Domains in CUDA
Domains are accessible via the new launch attributes cudaLaunchAttributeMemSyncDomain and cudaLaunchAttributeMemSyncDomainMap. The former selects between logical domains cudaLaunchMemSyncDomainDefault and cudaLaunchMemSyncDomainRemote, and the latter provides a mapping from logical to physical domains. The remote domain is intended for kernels performing remote memory access in order to isolate their memory traffic from local kernels. Note, however, the selection of a particular domain does not affect what memory access a kernel may legally perform.
The domain count can be queried via device attribute cudaDevAttrMemSyncDomainCount. Hopper has 4 domains. To facilitate portable code, domains functionality can be used on all devices and CUDA will report a count of 1 prior to Hopper.
Having logical domains eases application composition. An individual kernel launch at a low level in the stack, such as from NCCL, can select a semantic logical domain without concern for the surrounding application architecture. Higher levels can steer logical domains using the mapping. The default value for the logical domain if it is not set is the default domain, and the default mapping is to map the default domain to 0 and the remote domain to 1 (on GPUs with more than 1 domain). Specific libraries may tag launches with the remote domain in CUDA 12.0 and later; for example, NCCL 2.16 will do so. Together, this provides a beneficial use pattern for common applications out of the box, with no code changes needed in other components, frameworks, or at application level. An alternative use pattern, for example in an application using nvshmem or with no clear separation of kernel types, could be to partition parallel streams. Stream A may map both logical domains to physical domain 0, stream B to 1, and so on.
// Example of launching a kernel with the remote logical domain
cudaLaunchAttribute domainAttr;
domainAttr.id = cudaLaunchAttrMemSyncDomain;
domainAttr.val = cudaLaunchMemSyncDomainRemote;
cudaLaunchConfig_t config;
// Fill out other config fields
config.attrs = &domainAttr;
config.numAttrs = 1;
cudaLaunchKernelEx(&config, myKernel, kernelArg1, kernelArg2...);
// Example of setting a mapping for a stream
// (This mapping is the default for streams starting on Hopper if not
// explicitly set, and provided for illustration)
cudaLaunchAttributeValue mapAttr;
mapAttr.memSyncDomainMap.default_ = 0;
mapAttr.memSyncDomainMap.remote = 1;
cudaStreamSetAttribute(stream, cudaLaunchAttributeMemSyncDomainMap, &mapAttr);
// Example of mapping different streams to different physical domains, ignoring
// logical domain settings
cudaLaunchAttributeValue mapAttr;
mapAttr.memSyncDomainMap.default_ = 0;
mapAttr.memSyncDomainMap.remote = 0;
cudaStreamSetAttribute(streamA, cudaLaunchAttributeMemSyncDomainMap, &mapAttr);
mapAttr.memSyncDomainMap.default_ = 1;
mapAttr.memSyncDomainMap.remote = 1;
cudaStreamSetAttribute(streamB, cudaLaunchAttributeMemSyncDomainMap, &mapAttr);
As with other launch attributes, these are exposed uniformly on CUDA streams, individual launches using cudaLaunchKernelEx, and kernel nodes in CUDA graphs. A typical use would set the mapping at stream level and the logical domain at launch level (or bracketing a section of stream use) as described above.
Both attributes are copied to graph nodes during stream capture. Graphs take both attributes from the node itself, essentially an indirect way of specifying a physical domain. Domain-related attributes set on the stream a graph is launched into are not used in execution of the graph.
3.2.8. Asynchronous Concurrent Execution
CUDA exposes the following operations as independent tasks that can operate concurrently with one another:
Computation on the host;
Computation on the device;
Memory transfers from the host to the device;
Memory transfers from the device to the host;
Memory transfers within the memory of a given device;
Memory transfers among devices.
The level of concurrency achieved between these operations will depend on the feature set and compute capability of the device as described below.
3.2.8.1. Concurrent Execution between Host and Device
Concurrent host execution is facilitated through asynchronous library functions that return control to the host thread before the device completes the requested task. Using asynchronous calls, many device operations can be queued up together to be executed by the CUDA driver when appropriate device resources are available. This relieves the host thread of much of the responsibility to manage the device, leaving it free for other tasks. The following device operations are asynchronous with respect to the host:
Kernel launches;
Memory copies within a single device’s memory;
Memory copies from host to device of a memory block of 64 KB or less;
Memory copies performed by functions that are suffixed with
Async;Memory set function calls.
Programmers can globally disable asynchronicity of kernel launches for all CUDA applications running on a system by setting the CUDA_LAUNCH_BLOCKING environment variable to 1. This feature is provided for debugging purposes only and should not be used as a way to make production software run reliably.
Kernel launches are synchronous if hardware counters are collected via a profiler (Nsight, Visual Profiler) unless concurrent kernel profiling is enabled. Async memory copies might also be synchronous if they involve host memory that is not page-locked.
3.2.8.2. Concurrent Kernel Execution
Some devices of compute capability 2.x and higher can execute multiple kernels concurrently. Applications may query this capability by checking the concurrentKernels device property (see Device Enumeration), which is equal to 1 for devices that support it.
The maximum number of kernel launches that a device can execute concurrently depends on its compute capability and is listed in Table 21.
A kernel from one CUDA context cannot execute concurrently with a kernel from another CUDA context. The GPU may time slice to provide forward progress to each context. If a user wants to run kernels from multiple process simultaneously on the SM, one must enable MPS.
Kernels that use many textures or a large amount of local memory are less likely to execute concurrently with other kernels.
3.2.8.3. Overlap of Data Transfer and Kernel Execution
Some devices can perform an asynchronous memory copy to or from the GPU concurrently with kernel execution. Applications may query this capability by checking the asyncEngineCount device property (see Device Enumeration), which is greater than zero for devices that support it. If host memory is involved in the copy, it must be page-locked.
It is also possible to perform an intra-device copy simultaneously with kernel execution (on devices that support the concurrentKernels device property) and/or with copies to or from the device (for devices that support the asyncEngineCount property). Intra-device copies are initiated using the standard memory copy functions with destination and source addresses residing on the same device.
3.2.8.4. Concurrent Data Transfers
Some devices of compute capability 2.x and higher can overlap copies to and from the device. Applications may query this capability by checking the asyncEngineCount device property (see Device Enumeration), which is equal to 2 for devices that support it. In order to be overlapped, any host memory involved in the transfers must be page-locked.
3.2.8.5. Streams
Applications manage the concurrent operations described above through streams. A stream is a sequence of commands (possibly issued by different host threads) that execute in order. Different streams, on the other hand, may execute their commands out of order with respect to one another or concurrently; this behavior is not guaranteed and should therefore not be relied upon for correctness (for example, inter-kernel communication is undefined). The commands issued on a stream may execute when all the dependencies of the command are met. The dependencies could be previously launched commands on same stream or dependencies from other streams. The successful completion of synchronize call guarantees that all the commands launched are completed.
3.2.8.5.1. Creation and Destruction of Streams
A stream is defined by creating a stream object and specifying it as the stream parameter to a sequence of kernel launches and host <-> device memory copies. The following code sample creates two streams and allocates an array hostPtr of float in page-locked memory.
cudaStream_t stream[2];
for (int i = 0; i < 2; ++i)
cudaStreamCreate(&stream[i]);
float* hostPtr;
cudaMallocHost(&hostPtr, 2 * size);
Each of these streams is defined by the following code sample as a sequence of one memory copy from host to device, one kernel launch, and one memory copy from device to host:
for (int i = 0; i < 2; ++i) {
cudaMemcpyAsync(inputDevPtr + i * size, hostPtr + i * size,
size, cudaMemcpyHostToDevice, stream[i]);
MyKernel <<<100, 512, 0, stream[i]>>>
(outputDevPtr + i * size, inputDevPtr + i * size, size);
cudaMemcpyAsync(hostPtr + i * size, outputDevPtr + i * size,
size, cudaMemcpyDeviceToHost, stream[i]);
}
Each stream copies its portion of input array hostPtr to array inputDevPtr in device memory, processes inputDevPtr on the device by calling MyKernel(), and copies the result outputDevPtr back to the same portion of hostPtr. Overlapping Behavior describes how the streams overlap in this example depending on the capability of the device. Note that hostPtr must point to page-locked host memory for any overlap to occur.
Streams are released by calling cudaStreamDestroy().
for (int i = 0; i < 2; ++i)
cudaStreamDestroy(stream[i]);
In case the device is still doing work in the stream when cudaStreamDestroy() is called, the function will return immediately and the resources associated with the stream will be released automatically once the device has completed all work in the stream.
3.2.8.5.2. Default Stream
Kernel launches and host <-> device memory copies that do not specify any stream parameter, or equivalently that set the stream parameter to zero, are issued to the default stream. They are therefore executed in order.
For code that is compiled using the --default-stream per-thread compilation flag (or that defines the CUDA_API_PER_THREAD_DEFAULT_STREAM macro before including CUDA headers (cuda.h and cuda_runtime.h)), the default stream is a regular stream and each host thread has its own default stream.
Note
#define CUDA_API_PER_THREAD_DEFAULT_STREAM 1 cannot be used to enable this behavior when the code is compiled by nvcc as nvcc implicitly includes cuda_runtime.h at the top of the translation unit. In this case the --default-stream per-thread compilation flag needs to be used or the CUDA_API_PER_THREAD_DEFAULT_STREAM macro needs to be defined with the -DCUDA_API_PER_THREAD_DEFAULT_STREAM=1 compiler flag.
For code that is compiled using the --default-stream legacy compilation flag, the default stream is a special stream called the NULL stream and each device has a single NULL stream used for all host threads. The NULL stream is special as it causes implicit synchronization as described in Implicit Synchronization.
For code that is compiled without specifying a --default-stream compilation flag, --default-stream legacy is assumed as the default.
3.2.8.5.3. Explicit Synchronization
There are various ways to explicitly synchronize streams with each other.
cudaDeviceSynchronize() waits until all preceding commands in all streams of all host threads have completed.
cudaStreamSynchronize()takes a stream as a parameter and waits until all preceding commands in the given stream have completed. It can be used to synchronize the host with a specific stream, allowing other streams to continue executing on the device.
cudaStreamWaitEvent()takes a stream and an event as parameters (see Events for a description of events)and makes all the commands added to the given stream after the call to cudaStreamWaitEvent()delay their execution until the given event has completed.
cudaStreamQuery()provides applications with a way to know if all preceding commands in a stream have completed.
3.2.8.5.4. Implicit Synchronization
Two commands from different streams cannot run concurrently if any one of the following operations is issued in-between them by the host thread:
a page-locked host memory allocation,
a device memory allocation,
a device memory set,
a memory copy between two addresses to the same device memory,
any CUDA command to the NULL stream,
a switch between the L1/shared memory configurations described in Compute Capability 7.x.
Operations that require a dependency check include any other commands within the same stream as the launch being checked
and any call to cudaStreamQuery() on that stream. Therefore, applications should follow these guidelines to improve
their potential for concurrent kernel execution:
All independent operations should be issued before dependent operations,
Synchronization of any kind should be delayed as long as possible.
3.2.8.5.5. Overlapping Behavior
The amount of execution overlap between two streams depends on the order in which the commands are issued to each stream and whether or not the device supports overlap of data transfer and kernel execution (see Overlap of Data Transfer and Kernel Execution), concurrent kernel execution (see Concurrent Kernel Execution), and/or concurrent data transfers (see Concurrent Data Transfers).
For example, on devices that do not support concurrent data transfers, the two streams of the code sample of Creation and Destruction of Streams do not overlap at all because the memory copy from host to device is issued to stream[1] after the memory copy from device to host is issued to stream[0], so it can only start once the memory copy from device to host issued to stream[0] has completed. If the code is rewritten the following way (and assuming the device supports overlap of data transfer and kernel execution)
for (int i = 0; i < 2; ++i)
cudaMemcpyAsync(inputDevPtr + i * size, hostPtr + i * size,
size, cudaMemcpyHostToDevice, stream[i]);
for (int i = 0; i < 2; ++i)
MyKernel<<<100, 512, 0, stream[i]>>>
(outputDevPtr + i * size, inputDevPtr + i * size, size);
for (int i = 0; i < 2; ++i)
cudaMemcpyAsync(hostPtr + i * size, outputDevPtr + i * size,
size, cudaMemcpyDeviceToHost, stream[i]);
then the memory copy from host to device issued to stream[1] overlaps with the kernel launch issued to stream[0].
On devices that do support concurrent data transfers, the two streams of the code sample of Creation and Destruction of Streams do overlap: The memory copy from host to device issued to stream[1] overlaps with the memory copy from device to host issued to stream[0] and even with the kernel launch issued to stream[0] (assuming the device supports overlap of data transfer and kernel execution).
3.2.8.5.6. Host Functions (Callbacks)
The runtime provides a way to insert a CPU function call at any point into a stream via cudaLaunchHostFunc(). The provided function is executed on the host once all commands issued to the stream before the callback have completed.
The following code sample adds the host function MyCallback to each of two streams after issuing a host-to-device memory copy, a kernel launch and a device-to-host memory copy into each stream. The function will begin execution on the host after each of the device-to-host memory copies completes.
void CUDART_CB MyCallback(void *data){
printf("Inside callback %d\n", (size_t)data);
}
...
for (size_t i = 0; i < 2; ++i) {
cudaMemcpyAsync(devPtrIn[i], hostPtr[i], size, cudaMemcpyHostToDevice, stream[i]);
MyKernel<<<100, 512, 0, stream[i]>>>(devPtrOut[i], devPtrIn[i], size);
cudaMemcpyAsync(hostPtr[i], devPtrOut[i], size, cudaMemcpyDeviceToHost, stream[i]);
cudaLaunchHostFunc(stream[i], MyCallback, (void*)i);
}
The commands that are issued in a stream after a host function do not start executing before the function has completed.
A host function enqueued into a stream must not make CUDA API calls (directly or indirectly), as it might end up waiting on itself if it makes such a call leading to a deadlock.
3.2.8.5.7. Stream Priorities
The relative priorities of streams can be specified at creation using cudaStreamCreateWithPriority(). The range of allowable priorities, ordered as [ highest priority, lowest priority ] can be obtained using the cudaDeviceGetStreamPriorityRange() function. At runtime, pending work in higher-priority streams takes preference over pending work in low-priority streams.
The following code sample obtains the allowable range of priorities for the current device, and creates streams with the highest and lowest available priorities.
// get the range of stream priorities for this device
int priority_high, priority_low;
cudaDeviceGetStreamPriorityRange(&priority_low, &priority_high);
// create streams with highest and lowest available priorities
cudaStream_t st_high, st_low;
cudaStreamCreateWithPriority(&st_high, cudaStreamNonBlocking, priority_high);
cudaStreamCreateWithPriority(&st_low, cudaStreamNonBlocking, priority_low);
3.2.8.6. Programmatic Dependent Launch and Synchronization
The Programmatic Dependent Launch mechanism allows for a dependent secondary kernel to launch before the primary kernel it depends on in the same CUDA stream has finished executing. Available starting with devices of compute capability 9.0, this technique can provide performance benefits when the secondary kernel can complete significant work that does not depend on the results of the primary kernel.
3.2.8.6.1. Background
A CUDA application utilizes the GPU by launching and executing multiple kernels on it. A typical GPU activity timeline is shown in Figure 10.
Figure 10 GPU activity timeline
Here, secondary_kernel is launched after primary_kernel finishes its execution.
Serialized execution is usually necessary because secondary_kernel depends on result data
produced by primary_kernel. If secondary_kernel has no dependency on primary_kernel,
both of them can be launched concurrently by using Streams.
Even if secondary_kernel is dependent on primary_kernel, there is some potential for
concurrent execution. For example, almost all the kernels have
some sort of preamble section during which tasks such as zeroing buffers or loading
constant values are performed.
Figure 11 Preamble section of secondary_kernel
Figure 11 demonstrates the portion of secondary_kernel that could
be executed concurrently without impacting the application.
Note that concurrent launch also allows us to hide the launch latency of secondary_kernel behind
the execution of primary_kernel.
Figure 12 Concurrent execution of primary_kernel and secondary_kernel
The concurrent launch and execution of secondary_kernel shown in Figure 12 is
achievable using Programmatic Dependent Launch.
Programmatic Dependent Launch introduces changes to the CUDA kernel launch APIs as explained in following section. These APIs require at least compute capability 9.0 to provide overlapping execution.
3.2.8.6.2. API Description
In Programmatic Dependent Launch, a primary and a secondary kernel are launched in the same CUDA stream.
The primary kernel should execute cudaTriggerProgrammaticLaunchCompletion with all thread blocks when
it’s ready for the secondary kernel to launch. The secondary kernel must be launched using the extensible launch API as shown.
__global__ void primary_kernel() {
// Initial work that should finish before starting secondary kernel
// Trigger the secondary kernel
cudaTriggerProgrammaticLaunchCompletion();
// Work that can coincide with the secondary kernel
}
__global__ void secondary_kernel()
{
// Independent work
// Will block until all primary kernels the secondary kernel is dependent on have completed and flushed results to global memory
cudaGridDependencySynchronize();
// Dependent work
}
cudaLaunchAttribute attribute[1];
attribute[0].id = cudaLaunchAttributeProgrammaticStreamSerialization;
attribute[0].val.programmaticStreamSerializationAllowed = 1;
configSecondary.attrs = attribute;
configSecondary.numAttrs = 1;
primary_kernel<<<grid_dim, block_dim, 0, stream>>>();
cudaLaunchKernelEx(&configSecondary, secondary_kernel);
When the secondary kernel is launched using the cudaLaunchAttributeProgrammaticStreamSerialization attribute,
the CUDA driver is safe to launch the secondary kernel early and not wait on the
completion and memory flush of the primary before launching the secondary.
The CUDA driver can launch the secondary kernel when all primary thread blocks have launched and executed
cudaTriggerProgrammaticLaunchCompletion.
If the primary kernel doesn’t execute the trigger, it implicitly occurs after
all thread blocks in the primary kernel exit.
In either case, the secondary thread blocks might launch
before data written by the primary kernel is visible. As such, when the secondary kernel is configured with Programmatic Dependent Launch,
it must always use cudaGridDependencySynchronize
or other means to verify that the result data from the primary is available.
Please note that these methods provide the opportunity for the primary and secondary kernels to execute concurrently, however this behavior is opportunistic and not guaranteed to lead to concurrent kernel execution. Reliance on concurrent execution in this manner is unsafe and can lead to deadlock.
3.2.8.6.3. Use in CUDA Graphs
Programmatic Dependent Launch can be used in CUDA Graphs via stream capture or
directly via edge data. To program this feature in a CUDA Graph with edge data, use a cudaGraphDependencyType
value of cudaGraphDependencyTypeProgrammatic on an edge connecting two kernel nodes. This edge type makes the upstream kernel
visible to a cudaGridDependencySynchronize() in the downstream kernel. This type must be used with an outgoing port of
either cudaGraphKernelNodePortLaunchCompletion or cudaGraphKernelNodePortProgrammatic.
The resulting graph equivalents for stream capture are as follows:
Stream code (abbreviated) |
Resulting graph edge |
|---|---|
cudaLaunchAttribute attribute;
attribute.id = cudaLaunchAttributeProgrammaticStreamSerialization;
attribute.val.programmaticStreamSerializationAllowed = 1;
|
cudaGraphEdgeData edgeData;
edgeData.type = cudaGraphDependencyTypeProgrammatic;
edgeData.from_port = cudaGraphKernelNodePortProgrammatic;
|
cudaLaunchAttribute attribute;
attribute.id = cudaLaunchAttributeProgrammaticEvent;
attribute.val.programmaticEvent.triggerAtBlockStart = 0;
|
cudaGraphEdgeData edgeData;
edgeData.type = cudaGraphDependencyTypeProgrammatic;
edgeData.from_port = cudaGraphKernelNodePortProgrammatic;
|
cudaLaunchAttribute attribute;
attribute.id = cudaLaunchAttributeProgrammaticEvent;
attribute.val.programmaticEvent.triggerAtBlockStart = 1;
|
cudaGraphEdgeData edgeData;
edgeData.type = cudaGraphDependencyTypeProgrammatic;
edgeData.from_port = cudaGraphKernelNodePortLaunchCompletion;
|
3.2.8.7. CUDA Graphs
CUDA Graphs present a new model for work submission in CUDA. A graph is a series of operations, such as kernel launches, connected by dependencies, which is defined separately from its execution. This allows a graph to be defined once and then launched repeatedly. Separating out the definition of a graph from its execution enables a number of optimizations: first, CPU launch costs are reduced compared to streams, because much of the setup is done in advance; second, presenting the whole workflow to CUDA enables optimizations which might not be possible with the piecewise work submission mechanism of streams.
To see the optimizations possible with graphs, consider what happens in a stream: when you place a kernel into a stream, the host driver performs a sequence of operations in preparation for the execution of the kernel on the GPU. These operations, necessary for setting up and launching the kernel, are an overhead cost which must be paid for each kernel that is issued. For a GPU kernel with a short execution time, this overhead cost can be a significant fraction of the overall end-to-end execution time.
Work submission using graphs is separated into three distinct stages: definition, instantiation, and execution.
During the definition phase, a program creates a description of the operations in the graph along with the dependencies between them.
Instantiation takes a snapshot of the graph template, validates it, and performs much of the setup and initialization of work with the aim of minimizing what needs to be done at launch. The resulting instance is known as an executable graph.
An executable graph may be launched into a stream, similar to any other CUDA work. It may be launched any number of times without repeating the instantiation.
3.2.8.7.1. Graph Structure
An operation forms a node in a graph. The dependencies between the operations are the edges. These dependencies constrain the execution sequence of the operations.
An operation may be scheduled at any time once the nodes on which it depends are complete. Scheduling is left up to the CUDA system.
3.2.8.7.1.1. Node Types
A graph node can be one of:
kernel
CPU function call
memory copy
memset
empty node
waiting on an event
recording an event
signalling an external semaphore
waiting on an external semaphore
child graph: To execute a separate nested graph, as shown in the following figure.
Figure 13 Child Graph Example
3.2.8.7.1.2. Edge Data
CUDA 12.3 introduced edge data on CUDA Graphs. Edge data modifies a dependency specified by an edge and consists of three parts: an outgoing port, an incoming port, and a type. An outgoing port specifies when an associated edge is triggered. An incoming port specifies what portion of a node is dependent on an associated edge. A type modifies the relation between the endpoints.
Port values are specific to node type and direction, and edge types may be restricted to specific node types. In all cases, zero-initialized edge data represents default behavior. Outgoing port 0 waits on an entire task, incoming port 0 blocks an entire task, and edge type 0 is associated with a full dependency with memory synchronizing behavior.
Edge data is optionally specified in various graph APIs via a parallel array to the associated nodes. If it is omitted as an
input parameter, zero-initialized data is used. If it is omitted as an output (query) parameter, the API accepts this if the
edge data being ignored is all zero-initialized, and returns cudaErrorLossyQuery if the call would discard information.
Edge data is also available in some stream capture APIs: cudaStreamBeginCaptureToGraph(), cudaStreamGetCaptureInfo(),
and cudaStreamUpdateCaptureDependencies(). In these cases, there is not yet a downstream node. The data is associated with
a dangling edge (half edge) which will either be connected to a future captured node or discarded at termination of stream capture.
Note that some edge types do not wait on full completion of the upstream node. These edges are ignored when considering if a
stream capture has been fully rejoined to the origin stream, and cannot be discarded at the end of capture. See Creating a Graph Using Stream Capture.
Currently, no node types define additional incoming ports, and only kernel nodes define additional outgoing ports. There is
one non-default dependency type, cudaGraphDependencyTypeProgrammatic, which enables Programmatic Dependent Launch between two kernel nodes.
3.2.8.7.2. Creating a Graph Using Graph APIs
Graphs can be created via two mechanisms: explicit API and stream capture. The following is an example of creating and executing the below graph.
Figure 14 Creating a Graph Using Graph APIs Example
// Create the graph - it starts out empty
cudaGraphCreate(&graph, 0);
// For the purpose of this example, we'll create
// the nodes separately from the dependencies to
// demonstrate that it can be done in two stages.
// Note that dependencies can also be specified
// at node creation.
cudaGraphAddKernelNode(&a, graph, NULL, 0, &nodeParams);
cudaGraphAddKernelNode(&b, graph, NULL, 0, &nodeParams);
cudaGraphAddKernelNode(&c, graph, NULL, 0, &nodeParams);
cudaGraphAddKernelNode(&d, graph, NULL, 0, &nodeParams);
// Now set up dependencies on each node
cudaGraphAddDependencies(graph, &a, &b, 1); // A->B
cudaGraphAddDependencies(graph, &a, &c, 1); // A->C
cudaGraphAddDependencies(graph, &b, &d, 1); // B->D
cudaGraphAddDependencies(graph, &c, &d, 1); // C->D
3.2.8.7.3. Creating a Graph Using Stream Capture
Stream capture provides a mechanism to create a graph from existing stream-based APIs. A section of code which launches work into streams, including existing code, can be bracketed with calls to cudaStreamBeginCapture() and cudaStreamEndCapture(). See below.
cudaGraph_t graph;
cudaStreamBeginCapture(stream);
kernel_A<<< ..., stream >>>(...);
kernel_B<<< ..., stream >>>(...);
libraryCall(stream);
kernel_C<<< ..., stream >>>(...);
cudaStreamEndCapture(stream, &graph);
A call to cudaStreamBeginCapture() places a stream in capture mode. When a stream is being captured, work launched into the stream is not enqueued for execution. It is instead appended to an internal graph that is progressively being built up. This graph is then returned by calling cudaStreamEndCapture(), which also ends capture mode for the stream. A graph which is actively being constructed by stream capture is referred to as a capture graph.
Stream capture can be used on any CUDA stream except cudaStreamLegacy (the “NULL stream”). Note that it can be used on cudaStreamPerThread. If a program is using the legacy stream, it may be possible to redefine stream 0 to be the per-thread stream with no functional change. See Default Stream.
Whether a stream is being captured can be queried with cudaStreamIsCapturing().
Work can be captured to an existing graph using cudaStreamBeginCaptureToGraph(). Instead of capturing to an internal graph, work is captured to a graph provided by the user.
3.2.8.7.3.1. Cross-stream Dependencies and Events
Stream capture can handle cross-stream dependencies expressed with cudaEventRecord() and cudaStreamWaitEvent(), provided the event being waited upon was recorded into the same capture graph.
When an event is recorded in a stream that is in capture mode, it results in a captured event. A captured event represents a set of nodes in a capture graph.
When a captured event is waited on by a stream, it places the stream in capture mode if it is not already, and the next item in the stream will have additional dependencies on the nodes in the captured event. The two streams are then being captured to the same capture graph.
When cross-stream dependencies are present in stream capture, cudaStreamEndCapture() must still be called in the same stream where cudaStreamBeginCapture() was called; this is the origin stream. Any other streams which are being captured to the same capture graph, due to event-based dependencies, must also be joined back to the origin stream. This is illustrated below. All streams being captured to the same capture graph are taken out of capture mode upon cudaStreamEndCapture(). Failure to rejoin to the origin stream will result in failure of the overall capture operation.
// stream1 is the origin stream
cudaStreamBeginCapture(stream1);
kernel_A<<< ..., stream1 >>>(...);
// Fork into stream2
cudaEventRecord(event1, stream1);
cudaStreamWaitEvent(stream2, event1);
kernel_B<<< ..., stream1 >>>(...);
kernel_C<<< ..., stream2 >>>(...);
// Join stream2 back to origin stream (stream1)
cudaEventRecord(event2, stream2);
cudaStreamWaitEvent(stream1, event2);
kernel_D<<< ..., stream1 >>>(...);
// End capture in the origin stream
cudaStreamEndCapture(stream1, &graph);
// stream1 and stream2 no longer in capture mode
Graph returned by the above code is shown in Figure 14.
Note
When a stream is taken out of capture mode, the next non-captured item in the stream (if any) will still have a dependency on the most recent prior non-captured item, despite intermediate items having been removed.
3.2.8.7.3.2. Prohibited and Unhandled Operations
It is invalid to synchronize or query the execution status of a stream which is being captured or a captured event, because they do not represent items scheduled for execution. It is also invalid to query the execution status of or synchronize a broader handle which encompasses an active stream capture, such as a device or context handle when any associated stream is in capture mode.
When any stream in the same context is being captured, and it was not created with cudaStreamNonBlocking, any attempted use of the legacy stream is invalid. This is because the legacy stream handle at all times encompasses these other streams; enqueueing to the legacy stream would create a dependency on the streams being captured, and querying it or synchronizing it would query or synchronize the streams being captured.
It is therefore also invalid to call synchronous APIs in this case. Synchronous APIs, such as cudaMemcpy(), enqueue work to the legacy stream and synchronize it before returning.
Note
As a general rule, when a dependency relation would connect something that is captured with something that was not captured and instead enqueued for execution, CUDA prefers to return an error rather than ignore the dependency. An exception is made for placing a stream into or out of capture mode; this severs a dependency relation between items added to the stream immediately before and after the mode transition.
It is invalid to merge two separate capture graphs by waiting on a captured event from a stream which is being captured and is associated with a different capture graph than the event. It is invalid to wait on a non-captured event from a stream which is being captured without specifying the cudaEventWaitExternal flag.
A small number of APIs that enqueue asynchronous operations into streams are not currently supported in graphs and will return an error if called with a stream which is being captured, such as cudaStreamAttachMemAsync().
3.2.8.7.3.3. Invalidation
When an invalid operation is attempted during stream capture, any associated capture graphs are invalidated. When a capture graph is invalidated, further use of any streams which are being captured or captured events associated with the graph is invalid and will return an error, until stream capture is ended with cudaStreamEndCapture(). This call will take the associated streams out of capture mode, but will also return an error value and a NULL graph.
3.2.8.7.4. CUDA User Objects
CUDA User Objects can be used to help manage the lifetime of resources used by asynchronous work in CUDA. In particular, this feature is useful for CUDA Graphs and stream capture.
Various resource management schemes are not compatible with CUDA graphs. Consider for example an event-based pool or a synchronous-create, asynchronous-destroy scheme.
// Library API with pool allocation
void libraryWork(cudaStream_t stream) {
auto &resource = pool.claimTemporaryResource();
resource.waitOnReadyEventInStream(stream);
launchWork(stream, resource);
resource.recordReadyEvent(stream);
}
// Library API with asynchronous resource deletion
void libraryWork(cudaStream_t stream) {
Resource *resource = new Resource(...);
launchWork(stream, resource);
cudaStreamAddCallback(
stream,
[](cudaStream_t, cudaError_t, void *resource) {
delete static_cast<Resource *>(resource);
},
resource,
0);
// Error handling considerations not shown
}
These schemes are difficult with CUDA graphs because of the non-fixed pointer or handle for the resource which requires indirection or graph update, and the synchronous CPU code needed each time the work is submitted. They also do not work with stream capture if these considerations are hidden from the caller of the library, and because of use of disallowed APIs during capture. Various solutions exist such as exposing the resource to the caller. CUDA user objects present another approach.
A CUDA user object associates a user-specified destructor callback with an internal refcount, similar to C++ shared_ptr. References may be owned by user code on the CPU and by CUDA graphs. Note that for user-owned references, unlike C++ smart pointers, there is no object representing the reference; users must track user-owned references manually. A typical use case would be to immediately move the sole user-owned reference to a CUDA graph after the user object is created.
When a reference is associated to a CUDA graph, CUDA will manage the graph operations automatically. A cloned cudaGraph_t retains a copy of every reference owned by the source cudaGraph_t, with the same multiplicity. An instantiated cudaGraphExec_t retains a copy of every reference in the source cudaGraph_t. When a cudaGraphExec_t is destroyed without being synchronized, the references are retained until the execution is completed.
Here is an example use.
cudaGraph_t graph; // Preexisting graph
Object *object = new Object; // C++ object with possibly nontrivial destructor
cudaUserObject_t cuObject;
cudaUserObjectCreate(
&cuObject,
object, // Here we use a CUDA-provided template wrapper for this API,
// which supplies a callback to delete the C++ object pointer
1, // Initial refcount
cudaUserObjectNoDestructorSync // Acknowledge that the callback cannot be
// waited on via CUDA
);
cudaGraphRetainUserObject(
graph,
cuObject,
1, // Number of references
cudaGraphUserObjectMove // Transfer a reference owned by the caller (do
// not modify the total reference count)
);
// No more references owned by this thread; no need to call release API
cudaGraphExec_t graphExec;
cudaGraphInstantiate(&graphExec, graph, nullptr, nullptr, 0); // Will retain a
// new reference
cudaGraphDestroy(graph); // graphExec still owns a reference
cudaGraphLaunch(graphExec, 0); // Async launch has access to the user objects
cudaGraphExecDestroy(graphExec); // Launch is not synchronized; the release
// will be deferred if needed
cudaStreamSynchronize(0); // After the launch is synchronized, the remaining
// reference is released and the destructor will
// execute. Note this happens asynchronously.
// If the destructor callback had signaled a synchronization object, it would
// be safe to wait on it at this point.
References owned by graphs in child graph nodes are associated to the child graphs, not the parents. If a child graph is updated or deleted, the references change accordingly. If an executable graph or child graph is updated with cudaGraphExecUpdate or cudaGraphExecChildGraphNodeSetParams, the references in the new source graph are cloned and replace the references in the target graph. In either case, if previous launches are not synchronized, any references which would be released are held until the launches have finished executing.
There is not currently a mechanism to wait on user object destructors via a CUDA API. Users may signal a synchronization object manually from the destructor code. In addition, it is not legal to call CUDA APIs from the destructor, similar to the restriction on cudaLaunchHostFunc. This is to avoid blocking a CUDA internal shared thread and preventing forward progress. It is legal to signal another thread to perform an API call, if the dependency is one way and the thread doing the call cannot block forward progress of CUDA work.
User objects are created with cudaUserObjectCreate, which is a good starting point to browse related APIs.
3.2.8.7.5. Updating Instantiated Graphs
Work submission using graphs is separated into three distinct stages: definition, instantiation, and execution. In situations where the workflow is not changing, the overhead of definition and instantiation can be amortized over many executions, and graphs provide a clear advantage over streams.
A graph is a snapshot of a workflow, including kernels, parameters, and dependencies, in order to replay it as rapidly and efficiently as possible. In situations where the workflow changes the graph becomes out of date and must be modified. Major changes to graph structure such as topology or types of nodes will require re-instantiation of the source graph because various topology-related optimization techniques must be re-applied.
The cost of repeated instantiation can reduce the overall performance benefit from graph execution, but it is common for only node parameters, such as kernel parameters and cudaMemcpy addresses, to change while graph topology remains the same. For this case, CUDA provides a lightweight mechanism known as “Graph Update,” which allows certain node parameters to be modified in-place without having to rebuild the entire graph. This is much more efficient than re-instantiation.
Updates will take effect the next time the graph is launched, so they will not impact previous graph launches, even if they are running at the time of the update. A graph may be updated and relaunched repeatedly, so multiple updates/launches can be queued on a stream.
CUDA provides two mechanisms for updating instantiated graph parameters, whole graph update and individual node update. Whole graph update allows the user to supply a topologically identical cudaGraph_t object whose nodes contain updated parameters. Individual node update allows the user to explicitly update the parameters of individual nodes. Using an updated cudaGraph_t is more convenient when a large number of nodes are being updated, or when the graph topology is unknown to the caller (i.e., The graph resulted from stream capture of a library call). Using individual node update is preferred when the number of changes is small and the user has the handles to the nodes requiring updates. Individual node update skips the topology checks and comparisons for unchanged nodes, so it can be more efficient in many cases.
CUDA also provides a mechanism for enabling and disabling individual nodes without affecting their current parameters.
The following sections explain each approach in more detail.
3.2.8.7.5.1. Graph Update Limitations
Kernel nodes:
The owning context of the function cannot change.
A node whose function originally did not use CUDA dynamic parallelism cannot be updated to a function which uses CUDA dynamic parallelism.
cudaMemset and cudaMemcpy nodes:
The CUDA device(s) to which the operand(s) was allocated/mapped cannot change.
The source/destination memory must be allocated from the same context as the original source/destination memory.
Only 1D
cudaMemset/cudaMemcpynodes can be changed.
Additional memcpy node restrictions:
Changing either the source or destination memory type (i.e.,
cudaPitchedPtr,cudaArray_t, etc.), or the type of transfer (i.e.,cudaMemcpyKind) is not supported.
External semaphore wait nodes and record nodes:
Changing the number of semaphores is not supported.
Conditional nodes:
The order of handle creation and assignment must match between the graphs.
Changing node parameters is not supported (i.e. number of graphs in the conditional, node context, etc).
Changing parameters of nodes within the conditional body graph is subject to the rules above.
There are no restrictions on updates to host nodes, event record nodes, or event wait nodes.
3.2.8.7.5.2. Whole Graph Update
cudaGraphExecUpdate() allows an instantiated graph (the “original graph”) to be updated with the parameters from a topologically identical graph (the “updating” graph). The topology of the updating graph must be identical to the original graph used to instantiate the cudaGraphExec_t. In addition, the order in which the dependencies are specified must match. Finally, CUDA needs to consistently order the sink nodes (nodes with no dependencies). CUDA relies on the order of specific api calls to achieve consistent sink node ordering.
More explicitly, following the following rules will cause cudaGraphExecUpdate() to pair the nodes in the original graph and the updating graph deterministically:
For any capturing stream, the API calls operating on that stream must be made in the same order, including event wait and other api calls not directly corresponding to node creation.
The API calls which directly manipulate a given graph node’s incoming edges (including captured stream APIs, node add APIs, and edge addition / removal APIs) must be made in the same order. Moreover, when dependencies are specified in arrays to these APIs, the order in which the dependencies are specified inside those arrays must match.
-
Sink nodes must be consistently ordered. Sink nodes are nodes without dependent nodes / outgoing edges in the final graph at the time of the
cudaGraphExecUpdate()invocation. The following operations affect sink node ordering (if present) and must (as a combined set) be made in the same order:Node add APIs resulting in a sink node.
Edge removal resulting in a node becoming a sink node.
cudaStreamUpdateCaptureDependencies(), if it removes a sink node from a capturing stream’s dependency set.cudaStreamEndCapture().
The following example shows how the API could be used to update an instantiated graph:
cudaGraphExec_t graphExec = NULL;
for (int i = 0; i < 10; i++) {
cudaGraph_t graph;
cudaGraphExecUpdateResult updateResult;
cudaGraphNode_t errorNode;
// In this example we use stream capture to create the graph.
// You can also use the Graph API to produce a graph.
cudaStreamBeginCapture(stream, cudaStreamCaptureModeGlobal);
// Call a user-defined, stream based workload, for example
do_cuda_work(stream);
cudaStreamEndCapture(stream, &graph);
// If we've already instantiated the graph, try to update it directly
// and avoid the instantiation overhead
if (graphExec != NULL) {
// If the graph fails to update, errorNode will be set to the
// node causing the failure and updateResult will be set to a
// reason code.
cudaGraphExecUpdate(graphExec, graph, &errorNode, &updateResult);
}
// Instantiate during the first iteration or whenever the update
// fails for any reason
if (graphExec == NULL || updateResult != cudaGraphExecUpdateSuccess) {
// If a previous update failed, destroy the cudaGraphExec_t
// before re-instantiating it
if (graphExec != NULL) {
cudaGraphExecDestroy(graphExec);
}
// Instantiate graphExec from graph. The error node and
// error message parameters are unused here.
cudaGraphInstantiate(&graphExec, graph, NULL, NULL, 0);
}
cudaGraphDestroy(graph);
cudaGraphLaunch(graphExec, stream);
cudaStreamSynchronize(stream);
}
A typical workflow is to create the initial cudaGraph_t using either the stream capture or graph API. The cudaGraph_t is then instantiated and launched as normal. After the initial launch, a new cudaGraph_t is created using the same method as the initial graph and cudaGraphExecUpdate() is called. If the graph update is successful, indicated by the updateResult parameter in the above example, the updated cudaGraphExec_t is launched. If the update fails for any reason, the cudaGraphExecDestroy() and cudaGraphInstantiate() are called to destroy the original cudaGraphExec_t and instantiate a new one.
It is also possible to update the cudaGraph_t nodes directly (i.e., Using cudaGraphKernelNodeSetParams()) and subsequently update the cudaGraphExec_t, however it is more efficient to use the explicit node update APIs covered in the next section.
Conditional handle flags and default values are updated as part of the graph update.
Please see the Graph API for more information on usage and current limitations.
3.2.8.7.5.3. Individual Node Update
Instantiated graph node parameters can be updated directly. This eliminates the overhead of instantiation as well as the overhead of creating a new cudaGraph_t. If the number of nodes requiring update is small relative to the total number of nodes in the graph, it is better to update the nodes individually. The following methods are available for updating cudaGraphExec_t nodes:
cudaGraphExecKernelNodeSetParams()cudaGraphExecMemcpyNodeSetParams()cudaGraphExecMemsetNodeSetParams()cudaGraphExecHostNodeSetParams()cudaGraphExecChildGraphNodeSetParams()cudaGraphExecEventRecordNodeSetEvent()cudaGraphExecEventWaitNodeSetEvent()cudaGraphExecExternalSemaphoresSignalNodeSetParams()cudaGraphExecExternalSemaphoresWaitNodeSetParams()
Please see the Graph API for more information on usage and current limitations.
3.2.8.7.5.4. Individual Node Enable
Kernel, memset and memcpy nodes in an instantiated graph can be enabled or disabled using the cudaGraphNodeSetEnabled() API. This allows the creation of a graph which contains a superset of the desired functionality which can be customized for each launch. The enable state of a node can be queried using the cudaGraphNodeGetEnabled() API.
A disabled node is functionally equivalent to empty node until it is reenabled. Node parameters are not affected by enabling/disabling a node. Enable state is unaffected by individual node update or whole graph update with cudaGraphExecUpdate(). Parameter updates while the node is disabled will take effect when the node is reenabled.
The following methods are available for enabling/disabling cudaGraphExec_t nodes, as well as querying their status:
cudaGraphNodeSetEnabled()cudaGraphNodeGetEnabled()
Refer to the Graph API for more information on usage and current limitations.
3.2.8.7.6. Using Graph APIs
cudaGraph_t objects are not thread-safe. It is the responsibility of the user to ensure that multiple threads do not concurrently access the same cudaGraph_t.
A cudaGraphExec_t cannot run concurrently with itself. A launch of a cudaGraphExec_t will be ordered after previous launches of the same executable graph.
Graph execution is done in streams for ordering with other asynchronous work. However, the stream is for ordering only; it does not constrain the internal parallelism of the graph, nor does it affect where graph nodes execute.
See Graph API.
3.2.8.7.7. Device Graph Launch
There are many workflows which need to make data-dependent decisions during runtime and execute different operations depending on those decisions. Rather than offloading this decision-making process to the host, which may require a round-trip from the device, users may prefer to perform it on the device. To that end, CUDA provides a mechanism to launch graphs from the device.
Device graph launch provides a convenient way to perform dynamic control flow from the device, be it something as simple as a loop or as complex as a device-side work scheduler. This functionality is only available on systems which support unified addressing.
Graphs which can be launched from the device will henceforth be referred to as device graphs, and graphs which cannot be launched from the device will be referred to as host graphs.
Device graphs can be launched from both the host and device, whereas host graphs can only be launched from the host. Unlike host launches, launching a device graph from the device while a previous launch of the graph is running will result in an error, returning cudaErrorInvalidValue; therefore, a device graph cannot be launched twice from the device at the same time. Launching a device graph from the host and device simultaneously will result in undefined behavior.
3.2.8.7.7.1. Device Graph Creation
In order for a graph to be launched from the device, it must be instantiated explicitly for device launch. This is achieved by passing the cudaGraphInstantiateFlagDeviceLaunch flag to the cudaGraphInstantiate() call. As is the case for host graphs, device graph structure is fixed at time of instantiation and cannot be updated without re-instantiation, and instantiation can only be performed on the host. In order for a graph to be able to be instantiated for device launch, it must adhere to various requirements.
General requirements:
The graph’s nodes must all reside on a single device.
The graph can only contain kernel nodes, memcpy nodes, memset nodes, and child graph nodes.
Kernel nodes:
Use of CUDA Dynamic Parallelism by kernels in the graph is not permitted.
Cooperative launches are permitted so long as MPS is not in use.
Memcpy nodes:
Only copies involving device memory and/or pinned device-mapped host memory are permitted.
Copies involving CUDA arrays are not permitted.
Both operands must be accessible from the current device at time of instantiation. Note that the copy operation will be performed from the device on which the graph resides, even if it is targeting memory on another device.
In order to launch a graph on the device, it must first be uploaded to the device to populate the necessary device resources. This can be achieved in one of two ways.
Firstly, the graph can be uploaded explicitly, either via cudaGraphUpload() or by requesting an upload as part of instantiation via cudaGraphInstantiateWithParams().
Alternatively, the graph can first be launched from the host, which will perform this upload step implicitly as part of the launch.
Examples of all three methods can be seen below:
// Explicit upload after instantiation
cudaGraphInstantiate(&deviceGraphExec1, deviceGraph1, cudaGraphInstantiateFlagDeviceLaunch);
cudaGraphUpload(deviceGraphExec1, stream);
// Explicit upload as part of instantiation
cudaGraphInstantiateParams instantiateParams = {0};
instantiateParams.flags = cudaGraphInstantiateFlagDeviceLaunch | cudaGraphInstantiateFlagUpload;
instantiateParams.uploadStream = stream;
cudaGraphInstantiateWithParams(&deviceGraphExec2, deviceGraph2, &instantiateParams);
// Implicit upload via host launch
cudaGraphInstantiate(&deviceGraphExec3, deviceGraph3, cudaGraphInstantiateFlagDeviceLaunch);
cudaGraphLaunch(deviceGraphExec3, stream);
Device graphs can only be updated from the host, and must be re-uploaded to the device upon executable graph update in order for the changes to take effect. This can be achieved using the same methods outlined in the previous section. Unlike host graphs, launching a device graph from the device while an update is being applied will result in undefined behavior.
3.2.8.7.7.2. Device Launch
Device graphs can be launched from both the host and the device via cudaGraphLaunch(), which has the same signature on the device as on the host. Device graphs are launched via the same handle on the host and the device. Device graphs must be launched from another graph when launched from the device.
Device-side graph launch is per-thread and multiple launches may occur from different threads at the same time, so the user will need to select a single thread from which to launch a given graph.
Unlike host launch, device graphs cannot be launched into regular CUDA streams, and can only be launched into distinct named streams, which each denote a specific launch mode:
Stream |
Launch Mode |
|---|---|
|
Fire and forget launch |
|
Tail launch |
|
Sibling launch |
As the name suggests, a fire and forget launch is submitted to the GPU immediately, and it runs independently of the launching graph. In a fire-and-forget scenario, the launching graph is the parent, and the launched graph is the child.
Figure 15 Fire and forget launch
The above diagram can be generated by the sample code below:
__global__ void launchFireAndForgetGraph(cudaGraphExec_t graph) {
cudaGraphLaunch(graph, cudaStreamGraphFireAndForget);
}
void graphSetup() {
cudaGraphExec_t gExec1, gExec2;
cudaGraph_t g1, g2;
// Create, instantiate, and upload the device graph.
create_graph(&g2);
cudaGraphInstantiate(&gExec2, g2, cudaGraphInstantiateFlagDeviceLaunch);
cudaGraphUpload(gExec2, stream);
// Create and instantiate the launching graph.
cudaStreamBeginCapture(stream, cudaStreamCaptureModeGlobal);
launchFireAndForgetGraph<<<1, 1, 0, stream>>>(gExec2);
cudaStreamEndCapture(stream, &g1);
cudaGraphInstantiate(&gExec1, g1);
// Launch the host graph, which will in turn launch the device graph.
cudaGraphLaunch(gExec1, stream);
}
A graph can have up to 120 total fire-and-forget graphs during the course of its execution. This total resets between launches of the same parent graph.
In order to fully understand the device-side synchronization model, it is first necessary to understand the concept of an execution environment.
When a graph is launched from the device, it is launched into its own execution environment. The execution environment of a given graph encapsulates all work in the graph as well as all generated fire and forget work. The graph can be considered complete when it has completed execution and when all generated child work is complete.
The below diagram shows the environment encapsulation that would be generated by the fire-and-forget sample code in the previous section.
Figure 16 Fire and forget launch, with execution environments
These environments are also hierarchical, so a graph environment can include multiple levels of child-environments from fire and forget launches.
Figure 17 Nested fire and forget environments
When a graph is launched from the host, there exists a stream environment that parents the execution environment of the launched graph. The stream environment encapsulates all work generated as part of the overall launch. The stream launch is complete (i.e. downstream dependent work may now run) when the overall stream environment is marked as complete.
Figure 18 The stream environment, visualized
Unlike on the host, it is not possible to synchronize with device graphs from the GPU via traditional methods such as cudaDeviceSynchronize() or cudaStreamSynchronize(). Rather, in order to enable serial work dependencies, a different launch mode - tail launch - is offered, to provide similar functionality.
A tail launch executes when a graph’s environment is considered complete - ie, when the graph and all its children are complete. When a graph completes, the environment of the next graph in the tail launch list will replace the completed environment as a child of the parent environment. Like fire-and-forget launches, a graph can have multiple graphs enqueued for tail launch.
Figure 19 A simple tail launch
The above execution flow can be generated by the code below:
__global__ void launchTailGraph(cudaGraphExec_t graph) {
cudaGraphLaunch(graph, cudaStreamGraphTailLaunch);
}
void graphSetup() {
cudaGraphExec_t gExec1, gExec2;
cudaGraph_t g1, g2;
// Create, instantiate, and upload the device graph.
create_graph(&g2);
cudaGraphInstantiate(&gExec2, g2, cudaGraphInstantiateFlagDeviceLaunch);
cudaGraphUpload(gExec2, stream);
// Create and instantiate the launching graph.
cudaStreamBeginCapture(stream, cudaStreamCaptureModeGlobal);
launchTailGraph<<<1, 1, 0, stream>>>(gExec2);
cudaStreamEndCapture(stream, &g1);
cudaGraphInstantiate(&gExec1, g1);
// Launch the host graph, which will in turn launch the device graph.
cudaGraphLaunch(gExec1, stream);
}
Tail launches enqueued by a given graph will execute one at a time, in order of when they were enqueued. So the first enqueued graph will run first, and then the second, and so on.
Figure 20 Tail launch ordering
Tail launches enqueued by a tail graph will execute before tail launches enqueued by previous graphs in the tail launch list. These new tail launches will execute in the order they are enqueued.
Figure 21 Tail launch ordering when enqueued from multiple graphs
A graph can have up to 255 pending tail launches.
It is possible for a device graph to enqueue itself for a tail launch, although a given graph can only have one self-launch enqueued at a time. In order to query the currently running device graph so that it can be relaunched, a new device-side function is added:
cudaGraphExec_t cudaGetCurrentGraphExec();
This function returns the handle of the currently running graph if it is a device graph. If the currently executing kernel is not a node within a device graph, this function will return NULL.
Below is sample code showing usage of this function for a relaunch loop:
__device__ int relaunchCount = 0;
__global__ void relaunchSelf() {
int relaunchMax = 100;
if (threadIdx.x == 0) {
if (relaunchCount < relaunchMax) {
cudaGraphLaunch(cudaGetCurrentGraphExec(), cudaStreamGraphTailLaunch);
}
relaunchCount++;
}
}
Sibling launch is a variation of fire-and-forget launch in which the graph is launched not as a child of the launching graph’s execution environment, but rather as a child of the launching graph’s parent environment. Sibling launch is equivalent to a fire-and-forget launch from the launching graph’s parent environment.
Figure 22 A simple sibling launch
The above diagram can be generated by the sample code below:
__global__ void launchSiblingGraph(cudaGraphExec_t graph) {
cudaGraphLaunch(graph, cudaStreamGraphFireAndForgetAsSibling);
}
void graphSetup() {
cudaGraphExec_t gExec1, gExec2;
cudaGraph_t g1, g2;
// Create, instantiate, and upload the device graph.
create_graph(&g2);
cudaGraphInstantiate(&gExec2, g2, cudaGraphInstantiateFlagDeviceLaunch);
cudaGraphUpload(gExec2, stream);
// Create and instantiate the launching graph.
cudaStreamBeginCapture(stream, cudaStreamCaptureModeGlobal);
launchSiblingGraph<<<1, 1, 0, stream>>>(gExec2);
cudaStreamEndCapture(stream, &g1);
cudaGraphInstantiate(&gExec1, g1);
// Launch the host graph, which will in turn launch the device graph.
cudaGraphLaunch(gExec1, stream);
}
Since sibling launches are not launched into the launching graph’s execution environment, they will not gate tail launches enqueued by the launching graph.
3.2.8.7.8. Conditional Graph Nodes
Conditional nodes allow conditional execution and looping of a graph contained within the conditional node. This allows dynamic and iterative workflows to be represented completely within a graph and frees up the host CPU to perform other work in parallel.
Evaluation of the condition value is performed on the device when the dependencies of the conditional node have been met. Conditional nodes can be one of the following types:
Conditional IF nodes execute their body graph once if the condition value is non-zero when the node is executed.
Conditional WHILE nodes execute their body graph if the condition value is non-zero when the node is executed and will continue to execute their body graph until the condition value is zero.
A condition value is accessed by a conditional handle , which must be created before the node. The condition value can be set by device code using cudaGraphSetConditional(). A default value, applied on each graph launch, can also be specified when the handle is created.
When the conditional node is created, an empty graph is created and the handle is returned to the user so that the graph can be populated. This conditional body graph can be populated using either the graph APIs or cudaStreamBeginCaptureToGraph().
Conditional nodes can be nested.
3.2.8.7.8.1. Conditional Handles
A condition value is represented by cudaGraphConditionalHandle and is created by cudaGraphConditionalHandleCreate().
The handle must be associated with a single conditional node. Handles cannot be destroyed.
If cudaGraphCondAssignDefault is specified when the handle is created, the condition value will be initialized to the specified default before every graph launch. If this flag is not provided, it is up to the user to initialize the condition value in a kernel upstream of the conditional node which tests it. If the condition value is not initialized by one of these methods, its value is undefined.
The default value and flags associated with a handle will be updated during whole graph update.
3.2.8.7.8.2. Condtional Node Body Graph Requirements
General requirements:
The graph’s nodes must all reside on a single device.
The graph can only contain kernel nodes, empty nodes, memcpy nodes, memset nodes, child graph nodes, and conditional nodes.
Kernel nodes:
Use of CUDA Dynamic Parallelism by kernels in the graph is not permitted.
Cooperative launches are permitted so long as MPS is not in use.
Memcpy/Memset nodes:
Only copies/memsets involving device memory and/or pinned device-mapped host memory are permitted.
Copies/memsets involving CUDA arrays are not permitted.
Both operands must be accessible from the current device at time of instantiation. Note that the copy operation will be performed from the device on which the graph resides, even if it is targeting memory on another device.
3.2.8.7.8.3. Conditional IF Nodes
The body graph of an IF node will be executed once if the condition is non-zero when the node is executed. The following diagram depicts a 3 node graph where the middle node, B, is a conditional node:
Figure 23 Conditional IF Node
The following code illustrates the creation of a graph containing an IF conditional node. The default value of the condition is set using an upstream kernel. The body of the conditional is populated using the graph API.
__global__ void setHandle(cudaGraphConditionalHandle handle)
{
...
cudaGraphSetConditional(handle, value);
...
}
void graphSetup() {
cudaGraph_t graph;
cudaGraphExec_t graphExec;
cudaGraphNode_t node;
void *kernelArgs[1];
int value = 1;
cudaGraphCreate(&graph, 0);
cudaGraphConditionalHandle handle;
cudaGraphConditionalHandleCreate(&handle, graph);
// Use a kernel upstream of the conditional to set the handle value
cudaGraphNodeParams params = { cudaGraphNodeTypeKernel };
params.kernel.func = (void *)setHandle;
params.kernel.gridDim.x = params.kernel.gridDim.y = params.kernel.gridDim.z = 1;
params.kernel.blockDim.x = params.kernel.blockDim.y = params.kernel.blockDim.z = 1;
params.kernel.kernelParams = kernelArgs;
kernelArgs[0] = &handle;
cudaGraphAddNode(&node, graph, NULL, 0, ¶ms);
cudaGraphNodeParams cParams = { cudaGraphNodeTypeConditional };
cParams.conditional.handle = handle;
cParams.conditional.type = cudaGraphCondTypeIf;
cParams.conditional.size = 1;
cudaGraphAddNode(&node, graph, &node, 1, &cParams);
cudaGraph_t bodyGraph = cParams.conditional.phGraph_out[0];
// Populate the body of the conditional node
...
cudaGraphAddNode(&node, bodyGraph, NULL, 0, ¶ms);
cudaGraphInstantiate(&graphExec, graph, NULL, NULL, 0);
cudaGraphLaunch(graphExec, 0);
cudaDeviceSynchronize();
cudaGraphExecDestroy(graphExec);
cudaGraphDestroy(graph);
}
3.2.8.7.8.4. Conditional WHILE Nodes
The body graph of a WHILE node will be executed until the condition is non-zero. The condition will be evaluated when the node is executed and after completion of the body graph. The following diagram depicts a 3 node graph where the middle node, B, is a conditional node:
Figure 24 Conditional WHILE Node
The following code illustrates the creation of a graph containing a WHILE conditional node. The handle is created using cudaGraphCondAssignDefault to avoid the need for an upstream kernel. The body of the conditional is populated using the graph API.
__global__ void loopKernel(cudaGraphConditionalHandle handle)
{
static int count = 10;
cudaGraphSetConditional(handle, --count ? 1 : 0);
}
void graphSetup() {
cudaGraph_t graph;
cudaGraphExec_t graphExec;
cudaGraphNode_t node;
void *kernelArgs[1];
cuGraphCreate(&graph, 0);
cudaGraphConditionalHandle handle;
cudaGraphConditionalHandleCreate(&handle, graph, 1, cudaGraphCondAssignDefault);
cudaGraphNodeParams cParams = { cudaGraphNodeTypeConditional };
cParams.conditional.handle = handle;
cParams.conditional.type = cudaGraphCondTypeWhile;
cParams.conditional.size = 1;
cudaGraphAddNode(&node, graph, NULL, 0, &cParams);
cudaGraph_t bodyGraph = cParams.conditional.phGraph_out[0];
cudaGraphNodeParams params = { cudaGraphNodeTypeKernel };
params.kernel.func = (void *)loopKernel;
params.kernel.gridDim.x = params.kernel.gridDim.y = params.kernel.gridDim.z = 1;
params.kernel.blockDim.x = params.kernel.blockDim.y = params.kernel.blockDim.z = 1;
params.kernel.kernelParams = kernelArgs;
kernelArgs[0] = &handle;
cudaGraphAddNode(&node, bodyGraph, NULL, 0, ¶ms);
cudaGraphInstantiate(&graphExec, graph, NULL, NULL, 0);
cudaGraphLaunch(graphExec, 0);
cudaDeviceSynchronize();
cudaGraphExecDestroy(graphExec);
cudaGraphDestroy(graph);
}
3.2.8.8. Events
The runtime also provides a way to closely monitor the device’s progress, as well as perform accurate timing, by letting the application asynchronously record events at any point in the program, and query when these events are completed. An event has completed when all tasks - or optionally, all commands in a given stream - preceding the event have completed. Events in stream zero are completed after all preceding tasks and commands in all streams are completed.
3.2.8.8.1. Creation and Destruction of Events
The following code sample creates two events:
cudaEvent_t start, stop;
cudaEventCreate(&start);
cudaEventCreate(&stop);
They are destroyed this way:
cudaEventDestroy(start);
cudaEventDestroy(stop);
3.2.8.8.2. Elapsed Time
The events created in Creation and Destruction of Events can be used to time the code sample of Creation and Destruction of Streams the following way:
cudaEventRecord(start, 0);
for (int i = 0; i < 2; ++i) {
cudaMemcpyAsync(inputDev + i * size, inputHost + i * size,
size, cudaMemcpyHostToDevice, stream[i]);
MyKernel<<<100, 512, 0, stream[i]>>>
(outputDev + i * size, inputDev + i * size, size);
cudaMemcpyAsync(outputHost + i * size, outputDev + i * size,
size, cudaMemcpyDeviceToHost, stream[i]);
}
cudaEventRecord(stop, 0);
cudaEventSynchronize(stop);
float elapsedTime;
cudaEventElapsedTime(&elapsedTime, start, stop);
3.2.8.9. Synchronous Calls
When a synchronous function is called, control is not returned to the host thread before the device has completed the requested task. Whether the host thread will then yield, block, or spin can be specified by calling cudaSetDeviceFlags()with some specific flags (see reference manual for details) before any other CUDA call is performed by the host thread.
3.2.9. Multi-Device System
3.2.9.1. Device Enumeration
A host system can have multiple devices. The following code sample shows how to enumerate these devices, query their properties, and determine the number of CUDA-enabled devices.
int deviceCount;
cudaGetDeviceCount(&deviceCount);
int device;
for (device = 0; device < deviceCount; ++device) {
cudaDeviceProp deviceProp;
cudaGetDeviceProperties(&deviceProp, device);
printf("Device %d has compute capability %d.%d.\n",
device, deviceProp.major, deviceProp.minor);
}
3.2.9.2. Device Selection
A host thread can set the device it operates on at any time by calling cudaSetDevice(). Device memory allocations and kernel launches are made on the currently set device; streams and events are created in association with the currently set device. If no call to cudaSetDevice() is made, the current device is device 0.
The following code sample illustrates how setting the current device affects memory allocation and kernel execution.
size_t size = 1024 * sizeof(float);
cudaSetDevice(0); // Set device 0 as current
float* p0;
cudaMalloc(&p0, size); // Allocate memory on device 0
MyKernel<<<1000, 128>>>(p0); // Launch kernel on device 0
cudaSetDevice(1); // Set device 1 as current
float* p1;
cudaMalloc(&p1, size); // Allocate memory on device 1
MyKernel<<<1000, 128>>>(p1); // Launch kernel on device 1
3.2.9.3. Stream and Event Behavior
A kernel launch will fail if it is issued to a stream that is not associated to the current device as illustrated in the following code sample.
cudaSetDevice(0); // Set device 0 as current
cudaStream_t s0;
cudaStreamCreate(&s0); // Create stream s0 on device 0
MyKernel<<<100, 64, 0, s0>>>(); // Launch kernel on device 0 in s0
cudaSetDevice(1); // Set device 1 as current
cudaStream_t s1;
cudaStreamCreate(&s1); // Create stream s1 on device 1
MyKernel<<<100, 64, 0, s1>>>(); // Launch kernel on device 1 in s1
// This kernel launch will fail:
MyKernel<<<100, 64, 0, s0>>>(); // Launch kernel on device 1 in s0
A memory copy will succeed even if it is issued to a stream that is not associated to the current device.
cudaEventRecord() will fail if the input event and input stream are associated to different devices.
cudaEventElapsedTime() will fail if the two input events are associated to different devices.
cudaEventSynchronize() and cudaEventQuery() will succeed even if the input event is associated to a device that is different from the current device.
cudaStreamWaitEvent() will succeed even if the input stream and input event are associated to different devices. cudaStreamWaitEvent() can therefore be used to synchronize multiple devices with each other.
Each device has its own default stream (see Default Stream), so commands issued to the default stream of a device may execute out of order or concurrently with respect to commands issued to the default stream of any other device.
3.2.9.4. Peer-to-Peer Memory Access
Depending on the system properties, specifically the PCIe and/or NVLINK topology, devices are able to address each other’s memory (i.e., a kernel executing on one device can dereference a pointer to the memory of the other device). This peer-to-peer memory access feature is supported between two devices if cudaDeviceCanAccessPeer() returns true for these two devices.
Peer-to-peer memory access is only supported in 64-bit applications and must be enabled between two devices by calling cudaDeviceEnablePeerAccess() as illustrated in the following code sample. On non-NVSwitch enabled systems, each device can support a system-wide maximum of eight peer connections.
A unified address space is used for both devices (see Unified Virtual Address Space), so the same pointer can be used to address memory from both devices as shown in the code sample below.
cudaSetDevice(0); // Set device 0 as current
float* p0;
size_t size = 1024 * sizeof(float);
cudaMalloc(&p0, size); // Allocate memory on device 0
MyKernel<<<1000, 128>>>(p0); // Launch kernel on device 0
cudaSetDevice(1); // Set device 1 as current
cudaDeviceEnablePeerAccess(0, 0); // Enable peer-to-peer access
// with device 0
// Launch kernel on device 1
// This kernel launch can access memory on device 0 at address p0
MyKernel<<<1000, 128>>>(p0);
3.2.9.4.1. IOMMU on Linux
On Linux only, CUDA and the display driver does not support IOMMU-enabled bare-metal PCIe peer to peer memory copy. However, CUDA and the display driver does support IOMMU via VM pass through. As a consequence, users on Linux, when running on a native bare metal system, should disable the IOMMU. The IOMMU should be enabled and the VFIO driver be used as a PCIe pass through for virtual machines.
On Windows the above limitation does not exist.
3.2.9.5. Peer-to-Peer Memory Copy
Memory copies can be performed between the memories of two different devices.
When a unified address space is used for both devices (see Unified Virtual Address Space), this is done using the regular memory copy functions mentioned in Device Memory.
Otherwise, this is done using cudaMemcpyPeer(), cudaMemcpyPeerAsync(), cudaMemcpy3DPeer(), or cudaMemcpy3DPeerAsync() as illustrated in the following code sample.
cudaSetDevice(0); // Set device 0 as current
float* p0;
size_t size = 1024 * sizeof(float);
cudaMalloc(&p0, size); // Allocate memory on device 0
cudaSetDevice(1); // Set device 1 as current
float* p1;
cudaMalloc(&p1, size); // Allocate memory on device 1
cudaSetDevice(0); // Set device 0 as current
MyKernel<<<1000, 128>>>(p0); // Launch kernel on device 0
cudaSetDevice(1); // Set device 1 as current
cudaMemcpyPeer(p1, 1, p0, 0, size); // Copy p0 to p1
MyKernel<<<1000, 128>>>(p1); // Launch kernel on device 1
A copy (in the implicit NULL stream) between the memories of two different devices:
does not start until all commands previously issued to either device have completed and
runs to completion before any commands (see Asynchronous Concurrent Execution) issued after the copy to either device can start.
Consistent with the normal behavior of streams, an asynchronous copy between the memories of two devices may overlap with copies or kernels in another stream.
Note that if peer-to-peer access is enabled between two devices via cudaDeviceEnablePeerAccess() as described in Peer-to-Peer Memory Access, peer-to-peer memory copy between these two devices no longer needs to be staged through the host and is therefore faster.
3.2.10. Unified Virtual Address Space
When the application is run as a 64-bit process, a single address space is used for the host and all the devices of compute capability 2.0 and higher. All host memory allocations made via CUDA API calls and all device memory allocations on supported devices are within this virtual address range. As a consequence:
The location of any memory on the host allocated through CUDA, or on any of the devices which use the unified address space, can be determined from the value of the pointer using
cudaPointerGetAttributes().When copying to or from the memory of any device which uses the unified address space, the
cudaMemcpyKindparameter ofcudaMemcpy*()can be set tocudaMemcpyDefaultto determine locations from the pointers. This also works for host pointers not allocated through CUDA, as long as the current device uses unified addressing.Allocations via
cudaHostAlloc()are automatically portable (see Portable Memory) across all the devices for which the unified address space is used, and pointers returned bycudaHostAlloc()can be used directly from within kernels running on these devices (i.e., there is no need to obtain a device pointer viacudaHostGetDevicePointer()as described in Mapped Memory.
Applications may query if the unified address space is used for a particular device by checking that the unifiedAddressing device property (see Device Enumeration) is equal to 1.
3.2.11. Interprocess Communication
Any device memory pointer or event handle created by a host thread can be directly referenced by any other thread within the same process. It is not valid outside this process however, and therefore cannot be directly referenced by threads belonging to a different process.
To share device memory pointers and events across processes, an application must use the Inter Process Communication API, which is described in detail in the reference manual. The IPC API is only supported for 64-bit processes on Linux and for devices of compute capability 2.0 and higher. Note that the IPC API is not supported for cudaMallocManaged allocations.
Using this API, an application can get the IPC handle for a given device memory pointer using cudaIpcGetMemHandle(), pass it to another process using standard IPC mechanisms (for example, interprocess shared memory or files), and use cudaIpcOpenMemHandle() to retrieve a device pointer from the IPC handle that is a valid pointer within this other process. Event handles can be shared using similar entry points.
Note that allocations made by cudaMalloc() may be sub-allocated from a larger block of memory for performance reasons. In such case, CUDA IPC APIs will share the entire underlying memory block which may cause other sub-allocations to be shared, which can potentially lead to information disclosure between processes. To prevent this behavior, it is recommended to only share allocations with a 2MiB aligned size.
An example of using the IPC API is where a single primary process generates a batch of input data, making the data available to multiple secondary processes without requiring regeneration or copying.
Applications using CUDA IPC to communicate with each other should be compiled, linked, and run with the same CUDA driver and runtime.
Note
Since CUDA 11.5, only events-sharing IPC APIs are supported on L4T and embedded Linux Tegra devices with compute capability 7.x and higher. The memory-sharing IPC APIs are still not supported on Tegra platforms.
3.2.12. Error Checking
All runtime functions return an error code, but for an asynchronous function (see Asynchronous Concurrent Execution), this error code cannot possibly report any of the asynchronous errors that could occur on the device since the function returns before the device has completed the task; the error code only reports errors that occur on the host prior to executing the task, typically related to parameter validation; if an asynchronous error occurs, it will be reported by some subsequent unrelated runtime function call.
The only way to check for asynchronous errors just after some asynchronous function call is therefore to synchronize just after the call by calling cudaDeviceSynchronize() (or by using any other synchronization mechanisms described in Asynchronous Concurrent Execution) and checking the error code returned by cudaDeviceSynchronize().
The runtime maintains an error variable for each host thread that is initialized to cudaSuccess and is overwritten by the error code every time an error occurs (be it a parameter validation error or an asynchronous error). cudaPeekAtLastError() returns this variable. cudaGetLastError() returns this variable and resets it to cudaSuccess.
Kernel launches do not return any error code, so cudaPeekAtLastError() or cudaGetLastError() must be called just after the kernel launch to retrieve any pre-launch errors. To ensure that any error returned by cudaPeekAtLastError() or cudaGetLastError() does not originate from calls prior to the kernel launch, one has to make sure that the runtime error variable is set to cudaSuccess just before the kernel launch, for example, by calling cudaGetLastError() just before the kernel launch. Kernel launches are asynchronous, so to check for asynchronous errors, the application must synchronize in-between the kernel launch and the call to cudaPeekAtLastError() or cudaGetLastError().
Note that cudaErrorNotReady that may be returned by cudaStreamQuery() and cudaEventQuery() is not considered an error and is therefore not reported by cudaPeekAtLastError() or cudaGetLastError().
3.2.13. Call Stack
On devices of compute capability 2.x and higher, the size of the call stack can be queried usingcudaDeviceGetLimit() and set using cudaDeviceSetLimit().
When the call stack overflows, the kernel call fails with a stack overflow error if the application is run via a CUDA debugger (CUDA-GDB, Nsight) or an unspecified launch error, otherwise. When the compiler cannot determine the stack size, it issues a warning saying Stack size cannot be statically determined. This is usually the case with recursive functions. Once this warning is issued, user will need to set stack size manually if default stack size is not sufficient.
3.2.14. Texture and Surface Memory
CUDA supports a subset of the texturing hardware that the GPU uses for graphics to access texture and surface memory. Reading data from texture or surface memory instead of global memory can have several performance benefits as described in Device Memory Accesses.
3.2.14.1. Texture Memory
Texture memory is read from kernels using the device functions described in Texture Functions. The process of reading a texture calling one of these functions is called a texture fetch. Each texture fetch specifies a parameter called a texture object for the texture object API.
The texture object specifies:
The texture, which is the piece of texture memory that is fetched. Texture objects are created at runtime and the texture is specified when creating the texture object as described in Texture Object API.
Its dimensionality that specifies whether the texture is addressed as a one dimensional array using one texture coordinate, a two-dimensional array using two texture coordinates, or a three-dimensional array using three texture coordinates. Elements of the array are called texels, short for texture elements. The texture width, height, and depth refer to the size of the array in each dimension. Table 21 <features-and-technical-specifications-technical-specifications-per-compute-capability> lists the maximum texture width, height, and depth depending on the compute capability of the device.
The type of a texel, which is restricted to the basic integer and single-precision floating-point types and any of the 1-, 2-, and 4-component vector types defined in Built-in Vector Types that are derived from the basic integer and single-precision floating-point types.
The read mode, which is equal to
cudaReadModeNormalizedFloatorcudaReadModeElementType. If it iscudaReadModeNormalizedFloatand the type of the texel is a 16-bit or 8-bit integer type, the value returned by the texture fetch is actually returned as floating-point type and the full range of the integer type is mapped to [0.0, 1.0] for unsigned integer type and [-1.0, 1.0] for signed integer type; for example, an unsigned 8-bit texture element with the value 0xff reads as 1. If it iscudaReadModeElementType, no conversion is performed.Whether texture coordinates are normalized or not. By default, textures are referenced (by the functions of Texture Functions) using floating-point coordinates in the range [0, N-1] where N is the size of the texture in the dimension corresponding to the coordinate. For example, a texture that is 64x32 in size will be referenced with coordinates in the range [0, 63] and [0, 31] for the x and y dimensions, respectively. Normalized texture coordinates cause the coordinates to be specified in the range [0.0, 1.0-1/N] instead of [0, N-1], so the same 64x32 texture would be addressed by normalized coordinates in the range [0, 1-1/N] in both the x and y dimensions. Normalized texture coordinates are a natural fit to some applications’ requirements, if it is preferable for the texture coordinates to be independent of the texture size.
The addressing mode. It is valid to call the device functions of Section B.8 with coordinates that are out of range. The addressing mode defines what happens in that case. The default addressing mode is to clamp the coordinates to the valid range: [0, N) for non-normalized coordinates and [0.0, 1.0) for normalized coordinates. If the border mode is specified instead, texture fetches with out-of-range texture coordinates return zero. For normalized coordinates, the wrap mode and the mirror mode are also available. When using the wrap mode, each coordinate x is converted to frac(x)=x - floor(x) where floor(x) is the largest integer not greater than x. When using the mirror mode, each coordinate x is converted to frac(x) if floor(x) is even and 1-frac(x) if floor(x) is odd. The addressing mode is specified as an array of size three whose first, second, and third elements specify the addressing mode for the first, second, and third texture coordinates, respectively; the addressing mode are
cudaAddressModeBorder,cudaAddressModeClamp,cudaAddressModeWrap, andcudaAddressModeMirror;cudaAddressModeWrapandcudaAddressModeMirrorare only supported for normalized texture coordinatesThe filtering mode which specifies how the value returned when fetching the texture is computed based on the input texture coordinates. Linear texture filtering may be done only for textures that are configured to return floating-point data. It performs low-precision interpolation between neighboring texels. When enabled, the texels surrounding a texture fetch location are read and the return value of the texture fetch is interpolated based on where the texture coordinates fell between the texels. Simple linear interpolation is performed for one-dimensional textures, bilinear interpolation for two-dimensional textures, and trilinear interpolation for three-dimensional textures. Texture Fetching gives more details on texture fetching. The filtering mode is equal to
cudaFilterModePointorcudaFilterModeLinear. If it iscudaFilterModePoint, the returned value is the texel whose texture coordinates are the closest to the input texture coordinates. If it iscudaFilterModeLinear, the returned value is the linear interpolation of the two (for a one-dimensional texture), four (for a two dimensional texture), or eight (for a three dimensional texture) texels whose texture coordinates are the closest to the input texture coordinates.cudaFilterModeLinearis only valid for returned values of floating-point type.
Texture Object API introduces the texture object API.
16-Bit Floating-Point Textures explains how to deal with 16-bit floating-point textures.
Textures can also be layered as described in Layered Textures.
Cubemap Textures and Cubemap Layered Textures describe a special type of texture, the cubemap texture.
Texture Gather describes a special texture fetch, texture gather.
3.2.14.1.1. Texture Object API
A texture object is created using cudaCreateTextureObject() from a resource description of type struct cudaResourceDesc, which specifies the texture, and from a texture description defined as such:
struct cudaTextureDesc
{
enum cudaTextureAddressMode addressMode[3];
enum cudaTextureFilterMode filterMode;
enum cudaTextureReadMode readMode;
int sRGB;
int normalizedCoords;
unsigned int maxAnisotropy;
enum cudaTextureFilterMode mipmapFilterMode;
float mipmapLevelBias;
float minMipmapLevelClamp;
float maxMipmapLevelClamp;
};
addressModespecifies the addressing mode;filterModespecifies the filter mode;readModespecifies the read mode;normalizedCoordsspecifies whether texture coordinates are normalized or not;See reference manual for
sRGB,maxAnisotropy,mipmapFilterMode,mipmapLevelBias,minMipmapLevelClamp, andmaxMipmapLevelClamp.
The following code sample applies some simple transformation kernel to a texture.
// Simple transformation kernel
__global__ void transformKernel(float* output,
cudaTextureObject_t texObj,
int width, int height,
float theta)
{
// Calculate normalized texture coordinates
unsigned int x = blockIdx.x * blockDim.x + threadIdx.x;
unsigned int y = blockIdx.y * blockDim.y + threadIdx.y;
float u = x / (float)width;
float v = y / (float)height;
// Transform coordinates
u -= 0.5f;
v -= 0.5f;
float tu = u * cosf(theta) - v * sinf(theta) + 0.5f;
float tv = v * cosf(theta) + u * sinf(theta) + 0.5f;
// Read from texture and write to global memory
output[y * width + x] = tex2D<float>(texObj, tu, tv);
}
// Host code
int main()
{
const int height = 1024;
const int width = 1024;
float angle = 0.5;
// Allocate and set some host data
float *h_data = (float *)std::malloc(sizeof(float) * width * height);
for (int i = 0; i < height * width; ++i)
h_data[i] = i;
// Allocate CUDA array in device memory
cudaChannelFormatDesc channelDesc =
cudaCreateChannelDesc(32, 0, 0, 0, cudaChannelFormatKindFloat);
cudaArray_t cuArray;
cudaMallocArray(&cuArray, &channelDesc, width, height);
// Set pitch of the source (the width in memory in bytes of the 2D array pointed
// to by src, including padding), we dont have any padding
const size_t spitch = width * sizeof(float);
// Copy data located at address h_data in host memory to device memory
cudaMemcpy2DToArray(cuArray, 0, 0, h_data, spitch, width * sizeof(float),
height, cudaMemcpyHostToDevice);
// Specify texture
struct cudaResourceDesc resDesc;
memset(&resDesc, 0, sizeof(resDesc));
resDesc.resType = cudaResourceTypeArray;
resDesc.res.array.array = cuArray;
// Specify texture object parameters
struct cudaTextureDesc texDesc;
memset(&texDesc, 0, sizeof(texDesc));
texDesc.addressMode[0] = cudaAddressModeWrap;
texDesc.addressMode[1] = cudaAddressModeWrap;
texDesc.filterMode = cudaFilterModeLinear;
texDesc.readMode = cudaReadModeElementType;
texDesc.normalizedCoords = 1;
// Create texture object
cudaTextureObject_t texObj = 0;
cudaCreateTextureObject(&texObj, &resDesc, &texDesc, NULL);
// Allocate result of transformation in device memory
float *output;
cudaMalloc(&output, width * height * sizeof(float));
// Invoke kernel
dim3 threadsperBlock(16, 16);
dim3 numBlocks((width + threadsperBlock.x - 1) / threadsperBlock.x,
(height + threadsperBlock.y - 1) / threadsperBlock.y);
transformKernel<<<numBlocks, threadsperBlock>>>(output, texObj, width, height,
angle);
// Copy data from device back to host
cudaMemcpy(h_data, output, width * height * sizeof(float),
cudaMemcpyDeviceToHost);
// Destroy texture object
cudaDestroyTextureObject(texObj);
// Free device memory
cudaFreeArray(cuArray);
cudaFree(output);
// Free host memory
free(h_data);
return 0;
}
3.2.14.1.2. 16-Bit Floating-Point Textures
The 16-bit floating-point or half format supported by CUDA arrays is the same as the IEEE 754-2008 binary2 format.
CUDA C++ does not support a matching data type, but provides intrinsic functions to convert to and from the 32-bit floating-point format via the unsigned short type: __float2half_rn(float) and __half2float(unsigned short). These functions are only supported in device code. Equivalent functions for the host code can be found in the OpenEXR library, for example.
16-bit floating-point components are promoted to 32 bit float during texture fetching before any filtering is performed.
A channel description for the 16-bit floating-point format can be created by calling one of the cudaCreateChannelDescHalf*() functions.
3.2.14.1.3. Layered Textures
A one-dimensional or two-dimensional layered texture (also known as texture array in Direct3D and array texture in OpenGL) is a texture made up of a sequence of layers, all of which are regular textures of same dimensionality, size, and data type.
A one-dimensional layered texture is addressed using an integer index and a floating-point texture coordinate; the index denotes a layer within the sequence and the coordinate addresses a texel within that layer. A two-dimensional layered texture is addressed using an integer index and two floating-point texture coordinates; the index denotes a layer within the sequence and the coordinates address a texel within that layer.
A layered texture can only be a CUDA array by calling cudaMalloc3DArray() with the cudaArrayLayered flag (and a height of zero for one-dimensional layered texture).
Layered textures are fetched using the device functions described in tex1DLayered() and tex2DLayered(). Texture filtering (see Texture Fetching) is done only within a layer, not across layers.
Layered textures are only supported on devices of compute capability 2.0 and higher.
3.2.14.1.4. Cubemap Textures
A cubemap texture is a special type of two-dimensional layered texture that has six layers representing the faces of a cube:
The width of a layer is equal to its height.
The cubemap is addressed using three texture coordinates x, y, and z that are interpreted as a direction vector emanating from the center of the cube and pointing to one face of the cube and a texel within the layer corresponding to that face. More specifically, the face is selected by the coordinate with largest magnitude m and the corresponding layer is addressed using coordinates (s/m+1)/2 and (t/m+1)/2 where s and t are defined in Table 3.
face |
m |
s |
t |
||
|---|---|---|---|---|---|
|
x ≥ 0 |
0 |
x |
-z |
-y |
x < 0 |
1 |
-x |
z |
-y |
|
|
y ≥ 0 |
2 |
y |
x |
z |
y < 0 |
3 |
-y |
x |
-z |
|
|
z ≥ 0 |
4 |
z |
x |
-y |
z < 0 |
5 |
-z |
-x |
-y |
|
A cubemap texture can only be a CUDA array by calling cudaMalloc3DArray() with the cudaArrayCubemap flag.
Cubemap textures are fetched using the device function described in texCubemap().
Cubemap textures are only supported on devices of compute capability 2.0 and higher.
3.2.14.1.5. Cubemap Layered Textures
A cubemap layered texture is a layered texture whose layers are cubemaps of same dimension.
A cubemap layered texture is addressed using an integer index and three floating-point texture coordinates; the index denotes a cubemap within the sequence and the coordinates address a texel within that cubemap.
A cubemap layered texture can only be a CUDA array by calling cudaMalloc3DArray() with the cudaArrayLayered and cudaArrayCubemap flags.
Cubemap layered textures are fetched using the device function described in texCubemapLayered(). Texture filtering (see Texture Fetching) is done only within a layer, not across layers.
Cubemap layered textures are only supported on devices of compute capability 2.0 and higher.
3.2.14.1.6. Texture Gather
Texture gather is a special texture fetch that is available for two-dimensional textures only. It is performed by the tex2Dgather() function, which has the same parameters as tex2D(), plus an additional comp parameter equal to 0, 1, 2, or 3 (see tex2Dgather()). It returns four 32-bit numbers that correspond to the value of the component comp of each of the four texels that would have been used for bilinear filtering during a regular texture fetch. For example, if these texels are of values (253, 20, 31, 255), (250, 25, 29, 254), (249, 16, 37, 253), (251, 22, 30, 250), and comp is 2, tex2Dgather() returns (31, 29, 37, 30).
Note that texture coordinates are computed with only 8 bits of fractional precision. tex2Dgather() may therefore return unexpected results for cases where tex2D() would use 1.0 for one of its weights (α or β, see Linear Filtering). For example, with an x texture coordinate of 2.49805: xB=x-0.5=1.99805, however the fractional part of xB is stored in an 8-bit fixed-point format. Since 0.99805 is closer to 256.f/256.f than it is to 255.f/256.f, xB has the value 2. A tex2Dgather() in this case would therefore return indices 2 and 3 in x, instead of indices 1 and 2.
Texture gather is only supported for CUDA arrays created with the cudaArrayTextureGather flag and of width and height less than the maximum specified in Table 21 for texture gather, which is smaller than for regular texture fetch.
Texture gather is only supported on devices of compute capability 2.0 and higher.
3.2.14.2. Surface Memory
For devices of compute capability 2.0 and higher, a CUDA array (described in Cubemap Surfaces), created with the cudaArraySurfaceLoadStore flag, can be read and written via a surface object using the functions described in Surface Functions.
Table 21 lists the maximum surface width, height, and depth depending on the compute capability of the device.
3.2.14.2.1. Surface Object API
A surface object is created using cudaCreateSurfaceObject() from a resource description of type struct cudaResourceDesc. Unlike
texture memory, surface memory uses byte addressing. This means that the x-coordinate used to access a texture element via texture functions
needs to be multiplied by the byte size of the element to access the same element via a surface function. For example, the element at
texture coordinate x of a one-dimensional floating-point CUDA array bound to a texture object texObj and a surface object surfObj
is read using tex1d(texObj, x) via texObj, but surf1Dread(surfObj, 4*x) via surfObj. Similarly, the element at texture
coordinate x and y of a two-dimensional floating-point CUDA array bound to a texture object texObj and a surface object surfObj
is accessed using tex2d(texObj, x, y) via texObj, but surf2Dread(surfObj, 4*x, y) via surObj (the byte offset of the
y-coordinate is internally calculated from the underlying line pitch of the CUDA array).
The following code sample applies some simple transformation kernel to a surface.
// Simple copy kernel
__global__ void copyKernel(cudaSurfaceObject_t inputSurfObj,
cudaSurfaceObject_t outputSurfObj,
int width, int height)
{
// Calculate surface coordinates
unsigned int x = blockIdx.x * blockDim.x + threadIdx.x;
unsigned int y = blockIdx.y * blockDim.y + threadIdx.y;
if (x < width && y < height) {
uchar4 data;
// Read from input surface
surf2Dread(&data, inputSurfObj, x * 4, y);
// Write to output surface
surf2Dwrite(data, outputSurfObj, x * 4, y);
}
}
// Host code
int main()
{
const int height = 1024;
const int width = 1024;
// Allocate and set some host data
unsigned char *h_data =
(unsigned char *)std::malloc(sizeof(unsigned char) * width * height * 4);
for (int i = 0; i < height * width * 4; ++i)
h_data[i] = i;
// Allocate CUDA arrays in device memory
cudaChannelFormatDesc channelDesc =
cudaCreateChannelDesc(8, 8, 8, 8, cudaChannelFormatKindUnsigned);
cudaArray_t cuInputArray;
cudaMallocArray(&cuInputArray, &channelDesc, width, height,
cudaArraySurfaceLoadStore);
cudaArray_t cuOutputArray;
cudaMallocArray(&cuOutputArray, &channelDesc, width, height,
cudaArraySurfaceLoadStore);
// Set pitch of the source (the width in memory in bytes of the 2D array
// pointed to by src, including padding), we dont have any padding
const size_t spitch = 4 * width * sizeof(unsigned char);
// Copy data located at address h_data in host memory to device memory
cudaMemcpy2DToArray(cuInputArray, 0, 0, h_data, spitch,
4 * width * sizeof(unsigned char), height,
cudaMemcpyHostToDevice);
// Specify surface
struct cudaResourceDesc resDesc;
memset(&resDesc, 0, sizeof(resDesc));
resDesc.resType = cudaResourceTypeArray;
// Create the surface objects
resDesc.res.array.array = cuInputArray;
cudaSurfaceObject_t inputSurfObj = 0;
cudaCreateSurfaceObject(&inputSurfObj, &resDesc);
resDesc.res.array.array = cuOutputArray;
cudaSurfaceObject_t outputSurfObj = 0;
cudaCreateSurfaceObject(&outputSurfObj, &resDesc);
// Invoke kernel
dim3 threadsperBlock(16, 16);
dim3 numBlocks((width + threadsperBlock.x - 1) / threadsperBlock.x,
(height + threadsperBlock.y - 1) / threadsperBlock.y);
copyKernel<<<numBlocks, threadsperBlock>>>(inputSurfObj, outputSurfObj, width,
height);
// Copy data from device back to host
cudaMemcpy2DFromArray(h_data, spitch, cuOutputArray, 0, 0,
4 * width * sizeof(unsigned char), height,
cudaMemcpyDeviceToHost);
// Destroy surface objects
cudaDestroySurfaceObject(inputSurfObj);
cudaDestroySurfaceObject(outputSurfObj);
// Free device memory
cudaFreeArray(cuInputArray);
cudaFreeArray(cuOutputArray);
// Free host memory
free(h_data);
return 0;
}
3.2.14.2.2. Cubemap Surfaces
Cubemap surfaces are accessed usingsurfCubemapread() and surfCubemapwrite() (surfCubemapread() and surfCubemapwrite()) as a two-dimensional layered surface, i.e., using an integer index denoting a face and two floating-point texture coordinates addressing a texel within the layer corresponding to this face. Faces are ordered as indicated in Table 3.
3.2.14.2.3. Cubemap Layered Surfaces
Cubemap layered surfaces are accessed using surfCubemapLayeredread() and surfCubemapLayeredwrite() (surfCubemapLayeredread() and surfCubemapLayeredwrite()) as a two-dimensional layered surface, i.e., using an integer index denoting a face of one of the cubemaps and two floating-point texture coordinates addressing a texel within the layer corresponding to this face. Faces are ordered as indicated in Table 3, so index ((2 * 6) + 3), for example, accesses the fourth face of the third cubemap.
3.2.14.3. CUDA Arrays
CUDA arrays are opaque memory layouts optimized for texture fetching. They are one dimensional, two dimensional, or three-dimensional and composed of elements, each of which has 1, 2 or 4 components that may be signed or unsigned 8-, 16-, or 32-bit integers, 16-bit floats, or 32-bit floats. CUDA arrays are only accessible by kernels through texture fetching as described in Texture Memory or surface reading and writing as described in Surface Memory.
3.2.14.4. Read/Write Coherency
The texture and surface memory is cached (see Device Memory Accesses) and within the same kernel call, the cache is not kept coherent with respect to global memory writes and surface memory writes, so any texture fetch or surface read to an address that has been written to via a global write or a surface write in the same kernel call returns undefined data. In other words, a thread can safely read some texture or surface memory location only if this memory location has been updated by a previous kernel call or memory copy, but not if it has been previously updated by the same thread or another thread from the same kernel call.
3.2.15. Graphics Interoperability
Some resources from OpenGL and Direct3D may be mapped into the address space of CUDA, either to enable CUDA to read data written by OpenGL or Direct3D, or to enable CUDA to write data for consumption by OpenGL or Direct3D.
A resource must be registered to CUDA before it can be mapped using the functions mentioned in OpenGL Interoperability and Direct3D Interoperability. These functions return a pointer to a CUDA graphics resource of type struct cudaGraphicsResource. Registering a resource is potentially high-overhead and therefore typically called only once per resource. A CUDA graphics resource is unregistered using cudaGraphicsUnregisterResource(). Each CUDA context which intends to use the resource is required to register it separately.
Once a resource is registered to CUDA, it can be mapped and unmapped as many times as necessary using cudaGraphicsMapResources() and cudaGraphicsUnmapResources(). cudaGraphicsResourceSetMapFlags() can be called to specify usage hints (write-only, read-only) that the CUDA driver can use to optimize resource management.
A mapped resource can be read from or written to by kernels using the device memory address returned by cudaGraphicsResourceGetMappedPointer() for buffers andcudaGraphicsSubResourceGetMappedArray() for CUDA arrays.
Accessing a resource through OpenGL, Direct3D, or another CUDA context while it is mapped produces undefined results. OpenGL Interoperability and Direct3D Interoperability give specifics for each graphics API and some code samples. SLI Interoperability gives specifics for when the system is in SLI mode.
3.2.15.1. OpenGL Interoperability
The OpenGL resources that may be mapped into the address space of CUDA are OpenGL buffer, texture, and renderbuffer objects.
A buffer object is registered using cudaGraphicsGLRegisterBuffer(). In CUDA, it appears as a device pointer and can therefore be read and written by kernels or via cudaMemcpy() calls.
A texture or renderbuffer object is registered using cudaGraphicsGLRegisterImage(). In CUDA, it appears as a CUDA array. Kernels can read from the array by binding it to a texture or surface reference. They can also write to it via the surface write functions if the resource has been registered with the cudaGraphicsRegisterFlagsSurfaceLoadStore flag. The array can also be read and written via cudaMemcpy2D() calls. cudaGraphicsGLRegisterImage() supports all texture formats with 1, 2, or 4 components and an internal type of float (for example, GL_RGBA_FLOAT32), normalized integer (for example, GL_RGBA8, GL_INTENSITY16), and unnormalized integer (for example, GL_RGBA8UI) (please note that since unnormalized integer formats require OpenGL 3.0, they can only be written by shaders, not the fixed function pipeline).
The OpenGL context whose resources are being shared has to be current to the host thread making any OpenGL interoperability API calls.
Please note: When an OpenGL texture is made bindless (say for example by requesting an image or texture handle using the glGetTextureHandle*/glGetImageHandle* APIs) it cannot be registered with CUDA. The application needs to register the texture for interop before requesting an image or texture handle.
The following code sample uses a kernel to dynamically modify a 2D width x height grid of vertices stored in a vertex buffer object:
GLuint positionsVBO;
struct cudaGraphicsResource* positionsVBO_CUDA;
int main()
{
// Initialize OpenGL and GLUT for device 0
// and make the OpenGL context current
...
glutDisplayFunc(display);
// Explicitly set device 0
cudaSetDevice(0);
// Create buffer object and register it with CUDA
glGenBuffers(1, &positionsVBO);
glBindBuffer(GL_ARRAY_BUFFER, positionsVBO);
unsigned int size = width * height * 4 * sizeof(float);
glBufferData(GL_ARRAY_BUFFER, size, 0, GL_DYNAMIC_DRAW);
glBindBuffer(GL_ARRAY_BUFFER, 0);
cudaGraphicsGLRegisterBuffer(&positionsVBO_CUDA,
positionsVBO,
cudaGraphicsMapFlagsWriteDiscard);
// Launch rendering loop
glutMainLoop();
...
}
void display()
{
// Map buffer object for writing from CUDA
float4* positions;
cudaGraphicsMapResources(1, &positionsVBO_CUDA, 0);
size_t num_bytes;
cudaGraphicsResourceGetMappedPointer((void**)&positions,
&num_bytes,
positionsVBO_CUDA));
// Execute kernel
dim3 dimBlock(16, 16, 1);
dim3 dimGrid(width / dimBlock.x, height / dimBlock.y, 1);
createVertices<<<dimGrid, dimBlock>>>(positions, time,
width, height);
// Unmap buffer object
cudaGraphicsUnmapResources(1, &positionsVBO_CUDA, 0);
// Render from buffer object
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
glBindBuffer(GL_ARRAY_BUFFER, positionsVBO);
glVertexPointer(4, GL_FLOAT, 0, 0);
glEnableClientState(GL_VERTEX_ARRAY);
glDrawArrays(GL_POINTS, 0, width * height);
glDisableClientState(GL_VERTEX_ARRAY);
// Swap buffers
glutSwapBuffers();
glutPostRedisplay();
}
void deleteVBO()
{
cudaGraphicsUnregisterResource(positionsVBO_CUDA);
glDeleteBuffers(1, &positionsVBO);
}
__global__ void createVertices(float4* positions, float time,
unsigned int width, unsigned int height)
{
unsigned int x = blockIdx.x * blockDim.x + threadIdx.x;
unsigned int y = blockIdx.y * blockDim.y + threadIdx.y;
// Calculate uv coordinates
float u = x / (float)width;
float v = y / (float)height;
u = u * 2.0f - 1.0f;
v = v * 2.0f - 1.0f;
// calculate simple sine wave pattern
float freq = 4.0f;
float w = sinf(u * freq + time)
* cosf(v * freq + time) * 0.5f;
// Write positions
positions[y * width + x] = make_float4(u, w, v, 1.0f);
}
On Windows and for Quadro GPUs, cudaWGLGetDevice() can be used to retrieve the CUDA device associated to the handle returned by wglEnumGpusNV(). Quadro GPUs offer higher performance OpenGL interoperability than GeForce and Tesla GPUs in a multi-GPU configuration where OpenGL rendering is performed on the Quadro GPU and CUDA computations are performed on other GPUs in the system.
3.2.15.2. Direct3D Interoperability
Direct3D interoperability is supported for Direct3D 9Ex, Direct3D 10, and Direct3D 11.
A CUDA context may interoperate only with Direct3D devices that fulfill the following criteria: Direct3D 9Ex devices must be created with DeviceType set to D3DDEVTYPE_HAL and BehaviorFlags with the D3DCREATE_HARDWARE_VERTEXPROCESSING flag; Direct3D 10 and Direct3D 11 devices must be created with DriverType set to D3D_DRIVER_TYPE_HARDWARE.
The Direct3D resources that may be mapped into the address space of CUDA are Direct3D buffers, textures, and surfaces. These resources are registered using cudaGraphicsD3D9RegisterResource(), cudaGraphicsD3D10RegisterResource(), and cudaGraphicsD3D11RegisterResource().
The following code sample uses a kernel to dynamically modify a 2D width x height grid of vertices stored in a vertex buffer object.
3.2.15.2.1. Direct3D 9 Version
IDirect3D9* D3D;
IDirect3DDevice9* device;
struct CUSTOMVERTEX {
FLOAT x, y, z;
DWORD color;
};
IDirect3DVertexBuffer9* positionsVB;
struct cudaGraphicsResource* positionsVB_CUDA;
int main()
{
int dev;
// Initialize Direct3D
D3D = Direct3DCreate9Ex(D3D_SDK_VERSION);
// Get a CUDA-enabled adapter
unsigned int adapter = 0;
for (; adapter < g_pD3D->GetAdapterCount(); adapter++) {
D3DADAPTER_IDENTIFIER9 adapterId;
g_pD3D->GetAdapterIdentifier(adapter, 0, &adapterId);
if (cudaD3D9GetDevice(&dev, adapterId.DeviceName)
== cudaSuccess)
break;
}
// Create device
...
D3D->CreateDeviceEx(adapter, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_HARDWARE_VERTEXPROCESSING,
¶ms, NULL, &device);
// Use the same device
cudaSetDevice(dev);
// Create vertex buffer and register it with CUDA
unsigned int size = width * height * sizeof(CUSTOMVERTEX);
device->CreateVertexBuffer(size, 0, D3DFVF_CUSTOMVERTEX,
D3DPOOL_DEFAULT, &positionsVB, 0);
cudaGraphicsD3D9RegisterResource(&positionsVB_CUDA,
positionsVB,
cudaGraphicsRegisterFlagsNone);
cudaGraphicsResourceSetMapFlags(positionsVB_CUDA,
cudaGraphicsMapFlagsWriteDiscard);
// Launch rendering loop
while (...) {
...
Render();
...
}
...
}
void Render()
{
// Map vertex buffer for writing from CUDA
float4* positions;
cudaGraphicsMapResources(1, &positionsVB_CUDA, 0);
size_t num_bytes;
cudaGraphicsResourceGetMappedPointer((void**)&positions,
&num_bytes,
positionsVB_CUDA));
// Execute kernel
dim3 dimBlock(16, 16, 1);
dim3 dimGrid(width / dimBlock.x, height / dimBlock.y, 1);
createVertices<<<dimGrid, dimBlock>>>(positions, time,
width, height);
// Unmap vertex buffer
cudaGraphicsUnmapResources(1, &positionsVB_CUDA, 0);
// Draw and present
...
}
void releaseVB()
{
cudaGraphicsUnregisterResource(positionsVB_CUDA);
positionsVB->Release();
}
__global__ void createVertices(float4* positions, float time,
unsigned int width, unsigned int height)
{
unsigned int x = blockIdx.x * blockDim.x + threadIdx.x;
unsigned int y = blockIdx.y * blockDim.y + threadIdx.y;
// Calculate uv coordinates
float u = x / (float)width;
float v = y / (float)height;
u = u * 2.0f - 1.0f;
v = v * 2.0f - 1.0f;
// Calculate simple sine wave pattern
float freq = 4.0f;
float w = sinf(u * freq + time)
* cosf(v * freq + time) * 0.5f;
// Write positions
positions[y * width + x] =
make_float4(u, w, v, __int_as_float(0xff00ff00));
}
3.2.15.2.2. Direct3D 10 Version
ID3D10Device* device;
struct CUSTOMVERTEX {
FLOAT x, y, z;
DWORD color;
};
ID3D10Buffer* positionsVB;
struct cudaGraphicsResource* positionsVB_CUDA;
int main()
{
int dev;
// Get a CUDA-enabled adapter
IDXGIFactory* factory;
CreateDXGIFactory(__uuidof(IDXGIFactory), (void**)&factory);
IDXGIAdapter* adapter = 0;
for (unsigned int i = 0; !adapter; ++i) {
if (FAILED(factory->EnumAdapters(i, &adapter))
break;
if (cudaD3D10GetDevice(&dev, adapter) == cudaSuccess)
break;
adapter->Release();
}
factory->Release();
// Create swap chain and device
...
D3D10CreateDeviceAndSwapChain(adapter,
D3D10_DRIVER_TYPE_HARDWARE, 0,
D3D10_CREATE_DEVICE_DEBUG,
D3D10_SDK_VERSION,
&swapChainDesc, &swapChain,
&device);
adapter->Release();
// Use the same device
cudaSetDevice(dev);
// Create vertex buffer and register it with CUDA
unsigned int size = width * height * sizeof(CUSTOMVERTEX);
D3D10_BUFFER_DESC bufferDesc;
bufferDesc.Usage = D3D10_USAGE_DEFAULT;
bufferDesc.ByteWidth = size;
bufferDesc.BindFlags = D3D10_BIND_VERTEX_BUFFER;
bufferDesc.CPUAccessFlags = 0;
bufferDesc.MiscFlags = 0;
device->CreateBuffer(&bufferDesc, 0, &positionsVB);
cudaGraphicsD3D10RegisterResource(&positionsVB_CUDA,
positionsVB,
cudaGraphicsRegisterFlagsNone);
cudaGraphicsResourceSetMapFlags(positionsVB_CUDA,
cudaGraphicsMapFlagsWriteDiscard);
// Launch rendering loop
while (...) {
...
Render();
...
}
...
}
void Render()
{
// Map vertex buffer for writing from CUDA
float4* positions;
cudaGraphicsMapResources(1, &positionsVB_CUDA, 0);
size_t num_bytes;
cudaGraphicsResourceGetMappedPointer((void**)&positions,
&num_bytes,
positionsVB_CUDA));
// Execute kernel
dim3 dimBlock(16, 16, 1);
dim3 dimGrid(width / dimBlock.x, height / dimBlock.y, 1);
createVertices<<<dimGrid, dimBlock>>>(positions, time,
width, height);
// Unmap vertex buffer
cudaGraphicsUnmapResources(1, &positionsVB_CUDA, 0);
// Draw and present
...
}
void releaseVB()
{
cudaGraphicsUnregisterResource(positionsVB_CUDA);
positionsVB->Release();
}
__global__ void createVertices(float4* positions, float time,
unsigned int width, unsigned int height)
{
unsigned int x = blockIdx.x * blockDim.x + threadIdx.x;
unsigned int y = blockIdx.y * blockDim.y + threadIdx.y;
// Calculate uv coordinates
float u = x / (float)width;
float v = y / (float)height;
u = u * 2.0f - 1.0f;
v = v * 2.0f - 1.0f;
// Calculate simple sine wave pattern
float freq = 4.0f;
float w = sinf(u * freq + time)
* cosf(v * freq + time) * 0.5f;
// Write positions
positions[y * width + x] =
make_float4(u, w, v, __int_as_float(0xff00ff00));
}
3.2.15.2.3. Direct3D 11 Version
ID3D11Device* device;
struct CUSTOMVERTEX {
FLOAT x, y, z;
DWORD color;
};
ID3D11Buffer* positionsVB;
struct cudaGraphicsResource* positionsVB_CUDA;
int main()
{
int dev;
// Get a CUDA-enabled adapter
IDXGIFactory* factory;
CreateDXGIFactory(__uuidof(IDXGIFactory), (void**)&factory);
IDXGIAdapter* adapter = 0;
for (unsigned int i = 0; !adapter; ++i) {
if (FAILED(factory->EnumAdapters(i, &adapter))
break;
if (cudaD3D11GetDevice(&dev, adapter) == cudaSuccess)
break;
adapter->Release();
}
factory->Release();
// Create swap chain and device
...
sFnPtr_D3D11CreateDeviceAndSwapChain(adapter,
D3D11_DRIVER_TYPE_HARDWARE,
0,
D3D11_CREATE_DEVICE_DEBUG,
featureLevels, 3,
D3D11_SDK_VERSION,
&swapChainDesc, &swapChain,
&device,
&featureLevel,
&deviceContext);
adapter->Release();
// Use the same device
cudaSetDevice(dev);
// Create vertex buffer and register it with CUDA
unsigned int size = width * height * sizeof(CUSTOMVERTEX);
D3D11_BUFFER_DESC bufferDesc;
bufferDesc.Usage = D3D11_USAGE_DEFAULT;
bufferDesc.ByteWidth = size;
bufferDesc.BindFlags = D3D11_BIND_VERTEX_BUFFER;
bufferDesc.CPUAccessFlags = 0;
bufferDesc.MiscFlags = 0;
device->CreateBuffer(&bufferDesc, 0, &positionsVB);
cudaGraphicsD3D11RegisterResource(&positionsVB_CUDA,
positionsVB,
cudaGraphicsRegisterFlagsNone);
cudaGraphicsResourceSetMapFlags(positionsVB_CUDA,
cudaGraphicsMapFlagsWriteDiscard);
// Launch rendering loop
while (...) {
...
Render();
...
}
...
}
void Render()
{
// Map vertex buffer for writing from CUDA
float4* positions;
cudaGraphicsMapResources(1, &positionsVB_CUDA, 0);
size_t num_bytes;
cudaGraphicsResourceGetMappedPointer((void**)&positions,
&num_bytes,
positionsVB_CUDA));
// Execute kernel
dim3 dimBlock(16, 16, 1);
dim3 dimGrid(width / dimBlock.x, height / dimBlock.y, 1);
createVertices<<<dimGrid, dimBlock>>>(positions, time,
width, height);
// Unmap vertex buffer
cudaGraphicsUnmapResources(1, &positionsVB_CUDA, 0);
// Draw and present
...
}
void releaseVB()
{
cudaGraphicsUnregisterResource(positionsVB_CUDA);
positionsVB->Release();
}
__global__ void createVertices(float4* positions, float time,
unsigned int width, unsigned int height)
{
unsigned int x = blockIdx.x * blockDim.x + threadIdx.x;
unsigned int y = blockIdx.y * blockDim.y + threadIdx.y;
// Calculate uv coordinates
float u = x / (float)width;
float v = y / (float)height;
u = u * 2.0f - 1.0f;
v = v * 2.0f - 1.0f;
// Calculate simple sine wave pattern
float freq = 4.0f;
float w = sinf(u * freq + time)
* cosf(v * freq + time) * 0.5f;
// Write positions
positions[y * width + x] =
make_float4(u, w, v, __int_as_float(0xff00ff00));
}
3.2.15.3. SLI Interoperability
In a system with multiple GPUs, all CUDA-enabled GPUs are accessible via the CUDA driver and runtime as separate devices. There are however special considerations as described below when the system is in SLI mode.
First, an allocation in one CUDA device on one GPU will consume memory on other GPUs that are part of the SLI configuration of the Direct3D or OpenGL device. Because of this, allocations may fail earlier than otherwise expected.
Second, applications should create multiple CUDA contexts, one for each GPU in the SLI configuration. While this is not a strict requirement, it avoids unnecessary data transfers between devices. The application can use the cudaD3D[9|10|11]GetDevices() for Direct3D and cudaGLGetDevices() for OpenGL set of calls to identify the CUDA device handle(s) for the device(s) that are performing the rendering in the current and next frame. Given this information the application will typically choose the appropriate device and map Direct3D or OpenGL resources to the CUDA device returned by cudaD3D[9|10|11]GetDevices() or cudaGLGetDevices() when the deviceList parameter is set to cudaD3D[9|10|11]DeviceListCurrentFrame or cudaGLDeviceListCurrentFrame.
Please note that resource returned from cudaGraphicsD9D[9|10|11]RegisterResource and cudaGraphicsGLRegister[Buffer|Image] must be only used on device the registration happened. Therefore on SLI configurations when data for different frames is computed on different CUDA devices it is necessary to register the resources for each separately.
See Direct3D Interoperability and OpenGL Interoperability for details on how the CUDA runtime interoperate with Direct3D and OpenGL, respectively.
3.2.16. External Resource Interoperability
External resource interoperability allows CUDA to import certain resources that are explicitly exported by other APIs. These objects are typically exported by other APIs using handles native to the Operating System, like file descriptors on Linux or NT handles on Windows. They could also be exported using other unified interfaces such as the NVIDIA Software Communication Interface. There are two types of resources that can be imported: memory objects and synchronization objects.
Memory objects can be imported into CUDA using cudaImportExternalMemory(). An imported memory object can be accessed from within kernels using device pointers mapped onto the memory object via cudaExternalMemoryGetMappedBuffer()or CUDA mipmapped arrays mapped via cudaExternalMemoryGetMappedMipmappedArray(). Depending on the type of memory object, it may be possible for more than one mapping to be setup on a single memory object. The mappings must match the mappings setup in the exporting API. Any mismatched mappings result in undefined behavior. Imported memory objects must be freed using cudaDestroyExternalMemory(). Freeing a memory object does not free any mappings to that object. Therefore, any device pointers mapped onto that object must be explicitly freed using cudaFree() and any CUDA mipmapped arrays mapped onto that object must be explicitly freed using cudaFreeMipmappedArray(). It is illegal to access mappings to an object after it has been destroyed.
Synchronization objects can be imported into CUDA using cudaImportExternalSemaphore(). An imported synchronization object can then be signaled using cudaSignalExternalSemaphoresAsync() and waited on using cudaWaitExternalSemaphoresAsync(). It is illegal to issue a wait before the corresponding signal has been issued. Also, depending on the type of the imported synchronization object, there may be additional constraints imposed on how they can be signaled and waited on, as described in subsequent sections. Imported semaphore objects must be freed using cudaDestroyExternalSemaphore(). All outstanding signals and waits must have completed before the semaphore object is destroyed.
3.2.16.1. Vulkan Interoperability
3.2.16.1.1. Matching device UUIDs
When importing memory and synchronization objects exported by Vulkan, they must be imported and mapped on the same device as they were created on. The CUDA device that corresponds to the Vulkan physical device on which the objects were created can be determined by comparing the UUID of a CUDA device with that of the Vulkan physical device, as shown in the following code sample. Note that the Vulkan physical device should not be part of a device group that contains more than one Vulkan physical device. The device group as returned by vkEnumeratePhysicalDeviceGroups that contains the given Vulkan physical device must have a physical device count of 1.
int getCudaDeviceForVulkanPhysicalDevice(VkPhysicalDevice vkPhysicalDevice) {
VkPhysicalDeviceIDProperties vkPhysicalDeviceIDProperties = {};
vkPhysicalDeviceIDProperties.sType = VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_ID_PROPERTIES;
vkPhysicalDeviceIDProperties.pNext = NULL;
VkPhysicalDeviceProperties2 vkPhysicalDeviceProperties2 = {};
vkPhysicalDeviceProperties2.sType = VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_PROPERTIES_2;
vkPhysicalDeviceProperties2.pNext = &vkPhysicalDeviceIDProperties;
vkGetPhysicalDeviceProperties2(vkPhysicalDevice, &vkPhysicalDeviceProperties2);
int cudaDeviceCount;
cudaGetDeviceCount(&cudaDeviceCount);
for (int cudaDevice = 0; cudaDevice < cudaDeviceCount; cudaDevice++) {
cudaDeviceProp deviceProp;
cudaGetDeviceProperties(&deviceProp, cudaDevice);
if (!memcmp(&deviceProp.uuid, vkPhysicalDeviceIDProperties.deviceUUID, VK_UUID_SIZE)) {
return cudaDevice;
}
}
return cudaInvalidDeviceId;
}
3.2.16.1.2. Importing Memory Objects
On Linux and Windows 10, both dedicated and non-dedicated memory objects exported by Vulkan can be imported into CUDA. On Windows 7, only dedicated memory objects can be imported. When importing a Vulkan dedicated memory object, the flag cudaExternalMemoryDedicated must be set.
A Vulkan memory object exported using VK_EXTERNAL_MEMORY_HANDLE_TYPE_OPAQUE_FD_BIT can be imported into CUDA using the file descriptor associated with that object as shown below. Note that CUDA assumes ownership of the file descriptor once it is imported. Using the file descriptor after a successful import results in undefined behavior.
cudaExternalMemory_t importVulkanMemoryObjectFromFileDescriptor(int fd, unsigned long long size, bool isDedicated) {
cudaExternalMemory_t extMem = NULL;
cudaExternalMemoryHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalMemoryHandleTypeOpaqueFd;
desc.handle.fd = fd;
desc.size = size;
if (isDedicated) {
desc.flags |= cudaExternalMemoryDedicated;
}
cudaImportExternalMemory(&extMem, &desc);
// Input parameter 'fd' should not be used beyond this point as CUDA has assumed ownership of it
return extMem;
}
A Vulkan memory object exported using VK_EXTERNAL_MEMORY_HANDLE_TYPE_OPAQUE_WIN32_BIT can be imported into CUDA using the NT handle associated with that object as shown below. Note that CUDA does not assume ownership of the NT handle and it is the application’s responsibility to close the handle when it is not required anymore. The NT handle holds a reference to the resource, so it must be explicitly freed before the underlying memory can be freed.
cudaExternalMemory_t importVulkanMemoryObjectFromNTHandle(HANDLE handle, unsigned long long size, bool isDedicated) {
cudaExternalMemory_t extMem = NULL;
cudaExternalMemoryHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalMemoryHandleTypeOpaqueWin32;
desc.handle.win32.handle = handle;
desc.size = size;
if (isDedicated) {
desc.flags |= cudaExternalMemoryDedicated;
}
cudaImportExternalMemory(&extMem, &desc);
// Input parameter 'handle' should be closed if it's not needed anymore
CloseHandle(handle);
return extMem;
}
A Vulkan memory object exported using VK_EXTERNAL_MEMORY_HANDLE_TYPE_OPAQUE_WIN32_BIT can also be imported using a named handle if one exists as shown below.
cudaExternalMemory_t importVulkanMemoryObjectFromNamedNTHandle(LPCWSTR name, unsigned long long size, bool isDedicated) {
cudaExternalMemory_t extMem = NULL;
cudaExternalMemoryHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalMemoryHandleTypeOpaqueWin32;
desc.handle.win32.name = (void *)name;
desc.size = size;
if (isDedicated) {
desc.flags |= cudaExternalMemoryDedicated;
}
cudaImportExternalMemory(&extMem, &desc);
return extMem;
}
A Vulkan memory object exported using VK_EXTERNAL_MEMORY_HANDLE_TYPE_OPAQUE_WIN32_KMT_BIT can be imported into CUDA using the globally shared D3DKMT handle associated with that object as shown below. Since a globally shared D3DKMT handle does not hold a reference to the underlying memory it is automatically destroyed when all other references to the resource are destroyed.
cudaExternalMemory_t importVulkanMemoryObjectFromKMTHandle(HANDLE handle, unsigned long long size, bool isDedicated) {
cudaExternalMemory_t extMem = NULL;
cudaExternalMemoryHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalMemoryHandleTypeOpaqueWin32Kmt;
desc.handle.win32.handle = (void *)handle;
desc.size = size;
if (isDedicated) {
desc.flags |= cudaExternalMemoryDedicated;
}
cudaImportExternalMemory(&extMem, &desc);
return extMem;
}
3.2.16.1.3. Mapping Buffers onto Imported Memory Objects
A device pointer can be mapped onto an imported memory object as shown below. The offset and size of the mapping must match that specified when creating the mapping using the corresponding Vulkan API. All mapped device pointers must be freed using cudaFree().
void * mapBufferOntoExternalMemory(cudaExternalMemory_t extMem, unsigned long long offset, unsigned long long size) {
void *ptr = NULL;
cudaExternalMemoryBufferDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.offset = offset;
desc.size = size;
cudaExternalMemoryGetMappedBuffer(&ptr, extMem, &desc);
// Note: ‘ptr’ must eventually be freed using cudaFree()
return ptr;
}
3.2.16.1.4. Mapping Mipmapped Arrays onto Imported Memory Objects
A CUDA mipmapped array can be mapped onto an imported memory object as shown below. The offset, dimensions, format and number of mip levels must match that specified when creating the mapping using the corresponding Vulkan API. Additionally, if the mipmapped array is bound as a color target in Vulkan, the flagcudaArrayColorAttachment must be set. All mapped mipmapped arrays must be freed using cudaFreeMipmappedArray(). The following code sample shows how to convert Vulkan parameters into the corresponding CUDA parameters when mapping mipmapped arrays onto imported memory objects.
cudaMipmappedArray_t mapMipmappedArrayOntoExternalMemory(cudaExternalMemory_t extMem, unsigned long long offset, cudaChannelFormatDesc *formatDesc, cudaExtent *extent, unsigned int flags, unsigned int numLevels) {
cudaMipmappedArray_t mipmap = NULL;
cudaExternalMemoryMipmappedArrayDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.offset = offset;
desc.formatDesc = *formatDesc;
desc.extent = *extent;
desc.flags = flags;
desc.numLevels = numLevels;
// Note: 'mipmap' must eventually be freed using cudaFreeMipmappedArray()
cudaExternalMemoryGetMappedMipmappedArray(&mipmap, extMem, &desc);
return mipmap;
}
cudaChannelFormatDesc getCudaChannelFormatDescForVulkanFormat(VkFormat format)
{
cudaChannelFormatDesc d;
memset(&d, 0, sizeof(d));
switch (format) {
case VK_FORMAT_R8_UINT: d.x = 8; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case VK_FORMAT_R8_SINT: d.x = 8; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case VK_FORMAT_R8G8_UINT: d.x = 8; d.y = 8; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case VK_FORMAT_R8G8_SINT: d.x = 8; d.y = 8; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case VK_FORMAT_R8G8B8A8_UINT: d.x = 8; d.y = 8; d.z = 8; d.w = 8; d.f = cudaChannelFormatKindUnsigned; break;
case VK_FORMAT_R8G8B8A8_SINT: d.x = 8; d.y = 8; d.z = 8; d.w = 8; d.f = cudaChannelFormatKindSigned; break;
case VK_FORMAT_R16_UINT: d.x = 16; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case VK_FORMAT_R16_SINT: d.x = 16; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case VK_FORMAT_R16G16_UINT: d.x = 16; d.y = 16; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case VK_FORMAT_R16G16_SINT: d.x = 16; d.y = 16; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case VK_FORMAT_R16G16B16A16_UINT: d.x = 16; d.y = 16; d.z = 16; d.w = 16; d.f = cudaChannelFormatKindUnsigned; break;
case VK_FORMAT_R16G16B16A16_SINT: d.x = 16; d.y = 16; d.z = 16; d.w = 16; d.f = cudaChannelFormatKindSigned; break;
case VK_FORMAT_R32_UINT: d.x = 32; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case VK_FORMAT_R32_SINT: d.x = 32; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case VK_FORMAT_R32_SFLOAT: d.x = 32; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindFloat; break;
case VK_FORMAT_R32G32_UINT: d.x = 32; d.y = 32; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case VK_FORMAT_R32G32_SINT: d.x = 32; d.y = 32; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case VK_FORMAT_R32G32_SFLOAT: d.x = 32; d.y = 32; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindFloat; break;
case VK_FORMAT_R32G32B32A32_UINT: d.x = 32; d.y = 32; d.z = 32; d.w = 32; d.f = cudaChannelFormatKindUnsigned; break;
case VK_FORMAT_R32G32B32A32_SINT: d.x = 32; d.y = 32; d.z = 32; d.w = 32; d.f = cudaChannelFormatKindSigned; break;
case VK_FORMAT_R32G32B32A32_SFLOAT: d.x = 32; d.y = 32; d.z = 32; d.w = 32; d.f = cudaChannelFormatKindFloat; break;
default: assert(0);
}
return d;
}
cudaExtent getCudaExtentForVulkanExtent(VkExtent3D vkExt, uint32_t arrayLayers, VkImageViewType vkImageViewType) {
cudaExtent e = { 0, 0, 0 };
switch (vkImageViewType) {
case VK_IMAGE_VIEW_TYPE_1D: e.width = vkExt.width; e.height = 0; e.depth = 0; break;
case VK_IMAGE_VIEW_TYPE_2D: e.width = vkExt.width; e.height = vkExt.height; e.depth = 0; break;
case VK_IMAGE_VIEW_TYPE_3D: e.width = vkExt.width; e.height = vkExt.height; e.depth = vkExt.depth; break;
case VK_IMAGE_VIEW_TYPE_CUBE: e.width = vkExt.width; e.height = vkExt.height; e.depth = arrayLayers; break;
case VK_IMAGE_VIEW_TYPE_1D_ARRAY: e.width = vkExt.width; e.height = 0; e.depth = arrayLayers; break;
case VK_IMAGE_VIEW_TYPE_2D_ARRAY: e.width = vkExt.width; e.height = vkExt.height; e.depth = arrayLayers; break;
case VK_IMAGE_VIEW_TYPE_CUBE_ARRAY: e.width = vkExt.width; e.height = vkExt.height; e.depth = arrayLayers; break;
default: assert(0);
}
return e;
}
unsigned int getCudaMipmappedArrayFlagsForVulkanImage(VkImageViewType vkImageViewType, VkImageUsageFlags vkImageUsageFlags, bool allowSurfaceLoadStore) {
unsigned int flags = 0;
switch (vkImageViewType) {
case VK_IMAGE_VIEW_TYPE_CUBE: flags |= cudaArrayCubemap; break;
case VK_IMAGE_VIEW_TYPE_CUBE_ARRAY: flags |= cudaArrayCubemap | cudaArrayLayered; break;
case VK_IMAGE_VIEW_TYPE_1D_ARRAY: flags |= cudaArrayLayered; break;
case VK_IMAGE_VIEW_TYPE_2D_ARRAY: flags |= cudaArrayLayered; break;
default: break;
}
if (vkImageUsageFlags & VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT) {
flags |= cudaArrayColorAttachment;
}
if (allowSurfaceLoadStore) {
flags |= cudaArraySurfaceLoadStore;
}
return flags;
}
3.2.16.1.5. Importing Synchronization Objects
A Vulkan semaphore object exported using VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_FD_BITcan be imported into CUDA using the file descriptor associated with that object as shown below. Note that CUDA assumes ownership of the file descriptor once it is imported. Using the file descriptor after a successful import results in undefined behavior.
cudaExternalSemaphore_t importVulkanSemaphoreObjectFromFileDescriptor(int fd) {
cudaExternalSemaphore_t extSem = NULL;
cudaExternalSemaphoreHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalSemaphoreHandleTypeOpaqueFd;
desc.handle.fd = fd;
cudaImportExternalSemaphore(&extSem, &desc);
// Input parameter 'fd' should not be used beyond this point as CUDA has assumed ownership of it
return extSem;
}
A Vulkan semaphore object exported using VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_WIN32_BIT can be imported into CUDA using the NT handle associated with that object as shown below. Note that CUDA does not assume ownership of the NT handle and it is the application’s responsibility to close the handle when it is not required anymore. The NT handle holds a reference to the resource, so it must be explicitly freed before the underlying semaphore can be freed.
cudaExternalSemaphore_t importVulkanSemaphoreObjectFromNTHandle(HANDLE handle) {
cudaExternalSemaphore_t extSem = NULL;
cudaExternalSemaphoreHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalSemaphoreHandleTypeOpaqueWin32;
desc.handle.win32.handle = handle;
cudaImportExternalSemaphore(&extSem, &desc);
// Input parameter 'handle' should be closed if it's not needed anymore
CloseHandle(handle);
return extSem;
}
A Vulkan semaphore object exported using VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_WIN32_BIT can also be imported using a named handle if one exists as shown below.
cudaExternalSemaphore_t importVulkanSemaphoreObjectFromNamedNTHandle(LPCWSTR name) {
cudaExternalSemaphore_t extSem = NULL;
cudaExternalSemaphoreHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalSemaphoreHandleTypeOpaqueWin32;
desc.handle.win32.name = (void *)name;
cudaImportExternalSemaphore(&extSem, &desc);
return extSem;
}
A Vulkan semaphore object exported using VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_WIN32_KMT_BIT can be imported into CUDA using the globally shared D3DKMT handle associated with that object as shown below. Since a globally shared D3DKMT handle does not hold a reference to the underlying semaphore it is automatically destroyed when all other references to the resource are destroyed.
cudaExternalSemaphore_t importVulkanSemaphoreObjectFromKMTHandle(HANDLE handle) {
cudaExternalSemaphore_t extSem = NULL;
cudaExternalSemaphoreHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalSemaphoreHandleTypeOpaqueWin32Kmt;
desc.handle.win32.handle = (void *)handle;
cudaImportExternalSemaphore(&extSem, &desc);
return extSem;
}
3.2.16.1.6. Signaling/Waiting on Imported Synchronization Objects
An imported Vulkan semaphore object can be signaled as shown below. Signaling such a semaphore object sets it to the signaled state. The corresponding wait that waits on this signal must be issued in Vulkan. Additionally, the wait that waits on this signal must be issued after this signal has been issued.
void signalExternalSemaphore(cudaExternalSemaphore_t extSem, cudaStream_t stream) {
cudaExternalSemaphoreSignalParams params = {};
memset(¶ms, 0, sizeof(params));
cudaSignalExternalSemaphoresAsync(&extSem, ¶ms, 1, stream);
}
An imported Vulkan semaphore object can be waited on as shown below. Waiting on such a semaphore object waits until it reaches the signaled state and then resets it back to the unsignaled state. The corresponding signal that this wait is waiting on must be issued in Vulkan. Additionally, the signal must be issued before this wait can be issued.
void waitExternalSemaphore(cudaExternalSemaphore_t extSem, cudaStream_t stream) {
cudaExternalSemaphoreWaitParams params = {};
memset(¶ms, 0, sizeof(params));
cudaWaitExternalSemaphoresAsync(&extSem, ¶ms, 1, stream);
}
3.2.16.2. OpenGL Interoperability
Traditional OpenGL-CUDA interop as outlined in OpenGL Interoperability works by CUDA directly consuming handles created in OpenGL. However, since OpenGL can also consume memory and synchronization objects created in Vulkan, there exists an alternative approach to doing OpenGL-CUDA interop. Essentially, memory and synchronization objects exported by Vulkan could be imported into both, OpenGL and CUDA, and then used to coordinate memory accesses between OpenGL and CUDA. Please refer to the following OpenGL extensions for further details on how to import memory and synchronization objects exported by Vulkan:
GL_EXT_memory_object
GL_EXT_memory_object_fd
GL_EXT_memory_object_win32
GL_EXT_semaphore
GL_EXT_semaphore_fd
GL_EXT_semaphore_win32
3.2.16.3. Direct3D 12 Interoperability
3.2.16.3.1. Matching Device LUIDs
When importing memory and synchronization objects exported by Direct3D 12, they must be imported and mapped on the same device as they were created on. The CUDA device that corresponds to the Direct3D 12 device on which the objects were created can be determined by comparing the LUID of a CUDA device with that of the Direct3D 12 device, as shown in the following code sample. Note that the Direct3D 12 device must not be created on a linked node adapter. I.e. the node count as returned by ID3D12Device::GetNodeCount must be 1.
int getCudaDeviceForD3D12Device(ID3D12Device *d3d12Device) {
LUID d3d12Luid = d3d12Device->GetAdapterLuid();
int cudaDeviceCount;
cudaGetDeviceCount(&cudaDeviceCount);
for (int cudaDevice = 0; cudaDevice < cudaDeviceCount; cudaDevice++) {
cudaDeviceProp deviceProp;
cudaGetDeviceProperties(&deviceProp, cudaDevice);
char *cudaLuid = deviceProp.luid;
if (!memcmp(&d3d12Luid.LowPart, cudaLuid, sizeof(d3d12Luid.LowPart)) &&
!memcmp(&d3d12Luid.HighPart, cudaLuid + sizeof(d3d12Luid.LowPart), sizeof(d3d12Luid.HighPart))) {
return cudaDevice;
}
}
return cudaInvalidDeviceId;
}
3.2.16.3.2. Importing Memory Objects
A shareable Direct3D 12 heap memory object, created by setting the flag D3D12_HEAP_FLAG_SHARED in the call to ID3D12Device::CreateHeap, can be imported into CUDA using the NT handle associated with that object as shown below. Note that it is the application’s responsibility to close the NT handle when it is not required anymore. The NT handle holds a reference to the resource, so it must be explicitly freed before the underlying memory can be freed.
cudaExternalMemory_t importD3D12HeapFromNTHandle(HANDLE handle, unsigned long long size) {
cudaExternalMemory_t extMem = NULL;
cudaExternalMemoryHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalMemoryHandleTypeD3D12Heap;
desc.handle.win32.handle = (void *)handle;
desc.size = size;
cudaImportExternalMemory(&extMem, &desc);
// Input parameter 'handle' should be closed if it's not needed anymore
CloseHandle(handle);
return extMem;
}
A shareable Direct3D 12 heap memory object can also be imported using a named handle if one exists as shown below.
cudaExternalMemory_t importD3D12HeapFromNamedNTHandle(LPCWSTR name, unsigned long long size) {
cudaExternalMemory_t extMem = NULL;
cudaExternalMemoryHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalMemoryHandleTypeD3D12Heap;
desc.handle.win32.name = (void *)name;
desc.size = size;
cudaImportExternalMemory(&extMem, &desc);
return extMem;
}
A shareable Direct3D 12 committed resource, created by setting the flag D3D12_HEAP_FLAG_SHARED in the call to D3D12Device::CreateCommittedResource, can be imported into CUDA using the NT handle associated with that object as shown below. When importing a Direct3D 12 committed resource, the flag cudaExternalMemoryDedicated must be set. Note that it is the application’s responsibility to close the NT handle when it is not required anymore. The NT handle holds a reference to the resource, so it must be explicitly freed before the underlying memory can be freed.
cudaExternalMemory_t importD3D12CommittedResourceFromNTHandle(HANDLE handle, unsigned long long size) {
cudaExternalMemory_t extMem = NULL;
cudaExternalMemoryHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalMemoryHandleTypeD3D12Resource;
desc.handle.win32.handle = (void *)handle;
desc.size = size;
desc.flags |= cudaExternalMemoryDedicated;
cudaImportExternalMemory(&extMem, &desc);
// Input parameter 'handle' should be closed if it's not needed anymore
CloseHandle(handle);
return extMem;
}
A shareable Direct3D 12 committed resource can also be imported using a named handle if one exists as shown below.
cudaExternalMemory_t importD3D12CommittedResourceFromNamedNTHandle(LPCWSTR name, unsigned long long size) {
cudaExternalMemory_t extMem = NULL;
cudaExternalMemoryHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalMemoryHandleTypeD3D12Resource;
desc.handle.win32.name = (void *)name;
desc.size = size;
desc.flags |= cudaExternalMemoryDedicated;
cudaImportExternalMemory(&extMem, &desc);
return extMem;
}
3.2.16.3.3. Mapping Buffers onto Imported Memory Objects
A device pointer can be mapped onto an imported memory object as shown below. The offset and size of the mapping must match that specified when creating the mapping using the corresponding Direct3D 12 API. All mapped device pointers must be freed using cudaFree().
void * mapBufferOntoExternalMemory(cudaExternalMemory_t extMem, unsigned long long offset, unsigned long long size) {
void *ptr = NULL;
cudaExternalMemoryBufferDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.offset = offset;
desc.size = size;
cudaExternalMemoryGetMappedBuffer(&ptr, extMem, &desc);
// Note: 'ptr' must eventually be freed using cudaFree()
return ptr;
}
3.2.16.3.4. Mapping Mipmapped Arrays onto Imported Memory Objects
A CUDA mipmapped array can be mapped onto an imported memory object as shown below. The offset, dimensions, format and number of mip levels must match that specified when creating the mapping using the corresponding Direct3D 12 API. Additionally, if the mipmapped array can be bound as a render target in Direct3D 12, the flag cudaArrayColorAttachment must be set. All mapped mipmapped arrays must be freed using cudaFreeMipmappedArray(). The following code sample shows how to convert Vulkan parameters into the corresponding CUDA parameters when mapping mipmapped arrays onto imported memory objects.
cudaMipmappedArray_t mapMipmappedArrayOntoExternalMemory(cudaExternalMemory_t extMem, unsigned long long offset, cudaChannelFormatDesc *formatDesc, cudaExtent *extent, unsigned int flags, unsigned int numLevels) {
cudaMipmappedArray_t mipmap = NULL;
cudaExternalMemoryMipmappedArrayDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.offset = offset;
desc.formatDesc = *formatDesc;
desc.extent = *extent;
desc.flags = flags;
desc.numLevels = numLevels;
// Note: 'mipmap' must eventually be freed using cudaFreeMipmappedArray()
cudaExternalMemoryGetMappedMipmappedArray(&mipmap, extMem, &desc);
return mipmap;
}
cudaChannelFormatDesc getCudaChannelFormatDescForDxgiFormat(DXGI_FORMAT dxgiFormat)
{
cudaChannelFormatDesc d;
memset(&d, 0, sizeof(d));
switch (dxgiFormat) {
case DXGI_FORMAT_R8_UINT: d.x = 8; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R8_SINT: d.x = 8; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R8G8_UINT: d.x = 8; d.y = 8; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R8G8_SINT: d.x = 8; d.y = 8; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R8G8B8A8_UINT: d.x = 8; d.y = 8; d.z = 8; d.w = 8; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R8G8B8A8_SINT: d.x = 8; d.y = 8; d.z = 8; d.w = 8; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R16_UINT: d.x = 16; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R16_SINT: d.x = 16; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R16G16_UINT: d.x = 16; d.y = 16; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R16G16_SINT: d.x = 16; d.y = 16; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R16G16B16A16_UINT: d.x = 16; d.y = 16; d.z = 16; d.w = 16; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R16G16B16A16_SINT: d.x = 16; d.y = 16; d.z = 16; d.w = 16; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R32_UINT: d.x = 32; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R32_SINT: d.x = 32; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R32_FLOAT: d.x = 32; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindFloat; break;
case DXGI_FORMAT_R32G32_UINT: d.x = 32; d.y = 32; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R32G32_SINT: d.x = 32; d.y = 32; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R32G32_FLOAT: d.x = 32; d.y = 32; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindFloat; break;
case DXGI_FORMAT_R32G32B32A32_UINT: d.x = 32; d.y = 32; d.z = 32; d.w = 32; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R32G32B32A32_SINT: d.x = 32; d.y = 32; d.z = 32; d.w = 32; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R32G32B32A32_FLOAT: d.x = 32; d.y = 32; d.z = 32; d.w = 32; d.f = cudaChannelFormatKindFloat; break;
default: assert(0);
}
return d;
}
cudaExtent getCudaExtentForD3D12Extent(UINT64 width, UINT height, UINT16 depthOrArraySize, D3D12_SRV_DIMENSION d3d12SRVDimension) {
cudaExtent e = { 0, 0, 0 };
switch (d3d12SRVDimension) {
case D3D12_SRV_DIMENSION_TEXTURE1D: e.width = width; e.height = 0; e.depth = 0; break;
case D3D12_SRV_DIMENSION_TEXTURE2D: e.width = width; e.height = height; e.depth = 0; break;
case D3D12_SRV_DIMENSION_TEXTURE3D: e.width = width; e.height = height; e.depth = depthOrArraySize; break;
case D3D12_SRV_DIMENSION_TEXTURECUBE: e.width = width; e.height = height; e.depth = depthOrArraySize; break;
case D3D12_SRV_DIMENSION_TEXTURE1DARRAY: e.width = width; e.height = 0; e.depth = depthOrArraySize; break;
case D3D12_SRV_DIMENSION_TEXTURE2DARRAY: e.width = width; e.height = height; e.depth = depthOrArraySize; break;
case D3D12_SRV_DIMENSION_TEXTURECUBEARRAY: e.width = width; e.height = height; e.depth = depthOrArraySize; break;
default: assert(0);
}
return e;
}
unsigned int getCudaMipmappedArrayFlagsForD3D12Resource(D3D12_SRV_DIMENSION d3d12SRVDimension, D3D12_RESOURCE_FLAGS d3d12ResourceFlags, bool allowSurfaceLoadStore) {
unsigned int flags = 0;
switch (d3d12SRVDimension) {
case D3D12_SRV_DIMENSION_TEXTURECUBE: flags |= cudaArrayCubemap; break;
case D3D12_SRV_DIMENSION_TEXTURECUBEARRAY: flags |= cudaArrayCubemap | cudaArrayLayered; break;
case D3D12_SRV_DIMENSION_TEXTURE1DARRAY: flags |= cudaArrayLayered; break;
case D3D12_SRV_DIMENSION_TEXTURE2DARRAY: flags |= cudaArrayLayered; break;
default: break;
}
if (d3d12ResourceFlags & D3D12_RESOURCE_FLAG_ALLOW_RENDER_TARGET) {
flags |= cudaArrayColorAttachment;
}
if (allowSurfaceLoadStore) {
flags |= cudaArraySurfaceLoadStore;
}
return flags;
}
3.2.16.3.5. Importing Synchronization Objects
A shareable Direct3D 12 fence object, created by setting the flag D3D12_FENCE_FLAG_SHARED in the call to ID3D12Device::CreateFence, can be imported into CUDA using the NT handle associated with that object as shown below. Note that it is the application’s responsibility to close the handle when it is not required anymore. The NT handle holds a reference to the resource, so it must be explicitly freed before the underlying semaphore can be freed.
cudaExternalSemaphore_t importD3D12FenceFromNTHandle(HANDLE handle) {
cudaExternalSemaphore_t extSem = NULL;
cudaExternalSemaphoreHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalSemaphoreHandleTypeD3D12Fence;
desc.handle.win32.handle = handle;
cudaImportExternalSemaphore(&extSem, &desc);
// Input parameter 'handle' should be closed if it's not needed anymore
CloseHandle(handle);
return extSem;
}
A shareable Direct3D 12 fence object can also be imported using a named handle if one exists as shown below.
cudaExternalSemaphore_t importD3D12FenceFromNamedNTHandle(LPCWSTR name) {
cudaExternalSemaphore_t extSem = NULL;
cudaExternalSemaphoreHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalSemaphoreHandleTypeD3D12Fence;
desc.handle.win32.name = (void *)name;
cudaImportExternalSemaphore(&extSem, &desc);
return extSem;
}
3.2.16.3.6. Signaling/Waiting on Imported Synchronization Objects
An imported Direct3D 12 fence object can be signaled as shown below. Signaling such a fence object sets its value to the one specified. The corresponding wait that waits on this signal must be issued in Direct3D 12. Additionally, the wait that waits on this signal must be issued after this signal has been issued.
void signalExternalSemaphore(cudaExternalSemaphore_t extSem, unsigned long long value, cudaStream_t stream) {
cudaExternalSemaphoreSignalParams params = {};
memset(¶ms, 0, sizeof(params));
params.params.fence.value = value;
cudaSignalExternalSemaphoresAsync(&extSem, ¶ms, 1, stream);
}
An imported Direct3D 12 fence object can be waited on as shown below. Waiting on such a fence object waits until its value becomes greater than or equal to the specified value. The corresponding signal that this wait is waiting on must be issued in Direct3D 12. Additionally, the signal must be issued before this wait can be issued.
void waitExternalSemaphore(cudaExternalSemaphore_t extSem, unsigned long long value, cudaStream_t stream) {
cudaExternalSemaphoreWaitParams params = {};
memset(¶ms, 0, sizeof(params));
params.params.fence.value = value;
cudaWaitExternalSemaphoresAsync(&extSem, ¶ms, 1, stream);
}
3.2.16.4. Direct3D 11 Interoperability
3.2.16.4.1. Matching Device LUIDs
When importing memory and synchronization objects exported by Direct3D 11, they must be imported and mapped on the same device as they were created on. The CUDA device that corresponds to the Direct3D 11 device on which the objects were created can be determined by comparing the LUID of a CUDA device with that of the Direct3D 11 device, as shown in the following code sample.
int getCudaDeviceForD3D11Device(ID3D11Device *d3d11Device) {
IDXGIDevice *dxgiDevice;
d3d11Device->QueryInterface(__uuidof(IDXGIDevice), (void **)&dxgiDevice);
IDXGIAdapter *dxgiAdapter;
dxgiDevice->GetAdapter(&dxgiAdapter);
DXGI_ADAPTER_DESC dxgiAdapterDesc;
dxgiAdapter->GetDesc(&dxgiAdapterDesc);
LUID d3d11Luid = dxgiAdapterDesc.AdapterLuid;
int cudaDeviceCount;
cudaGetDeviceCount(&cudaDeviceCount);
for (int cudaDevice = 0; cudaDevice < cudaDeviceCount; cudaDevice++) {
cudaDeviceProp deviceProp;
cudaGetDeviceProperties(&deviceProp, cudaDevice);
char *cudaLuid = deviceProp.luid;
if (!memcmp(&d3d11Luid.LowPart, cudaLuid, sizeof(d3d11Luid.LowPart)) &&
!memcmp(&d3d11Luid.HighPart, cudaLuid + sizeof(d3d11Luid.LowPart), sizeof(d3d11Luid.HighPart))) {
return cudaDevice;
}
}
return cudaInvalidDeviceId;
}
3.2.16.4.2. Importing Memory Objects
A shareable Direct3D 11 texture resource, viz, ID3D11Texture1D, ID3D11Texture2D or ID3D11Texture3D, can be created by setting either the D3D11_RESOURCE_MISC_SHARED or D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX (on Windows 7) or D3D11_RESOURCE_MISC_SHARED_NTHANDLE (on Windows 10) when calling ID3D11Device:CreateTexture1D, ID3D11Device:CreateTexture2D or ID3D11Device:CreateTexture3D respectively. A shareable Direct3D 11 buffer resource, ID3D11Buffer, can be created by specifying either of the above flags when calling ID3D11Device::CreateBuffer. A shareable resource created by specifying the D3D11_RESOURCE_MISC_SHARED_NTHANDLE can be imported into CUDA using the NT handle associated with that object as shown below. Note that it is the application’s responsibility to close the NT handle when it is not required anymore. The NT handle holds a reference to the resource, so it must be explicitly freed before the underlying memory can be freed. When importing a Direct3D 11 resource, the flag cudaExternalMemoryDedicated must be set.
cudaExternalMemory_t importD3D11ResourceFromNTHandle(HANDLE handle, unsigned long long size) {
cudaExternalMemory_t extMem = NULL;
cudaExternalMemoryHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalMemoryHandleTypeD3D11Resource;
desc.handle.win32.handle = (void *)handle;
desc.size = size;
desc.flags |= cudaExternalMemoryDedicated;
cudaImportExternalMemory(&extMem, &desc);
// Input parameter 'handle' should be closed if it's not needed anymore
CloseHandle(handle);
return extMem;
}
A shareable Direct3D 11 resource can also be imported using a named handle if one exists as shown below.
cudaExternalMemory_t importD3D11ResourceFromNamedNTHandle(LPCWSTR name, unsigned long long size) {
cudaExternalMemory_t extMem = NULL;
cudaExternalMemoryHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalMemoryHandleTypeD3D11Resource;
desc.handle.win32.name = (void *)name;
desc.size = size;
desc.flags |= cudaExternalMemoryDedicated;
cudaImportExternalMemory(&extMem, &desc);
return extMem;
}
A shareable Direct3D 11 resource, created by specifying the D3D11_RESOURCE_MISC_SHARED or D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX, can be imported into CUDA using the globally shared D3DKMT handle associated with that object as shown below. Since a globally shared D3DKMT handle does not hold a reference to the underlying memory it is automatically destroyed when all other references to the resource are destroyed.
cudaExternalMemory_t importD3D11ResourceFromKMTHandle(HANDLE handle, unsigned long long size) {
cudaExternalMemory_t extMem = NULL;
cudaExternalMemoryHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalMemoryHandleTypeD3D11ResourceKmt;
desc.handle.win32.handle = (void *)handle;
desc.size = size;
desc.flags |= cudaExternalMemoryDedicated;
cudaImportExternalMemory(&extMem, &desc);
return extMem;
}
3.2.16.4.3. Mapping Buffers onto Imported Memory Objects
A device pointer can be mapped onto an imported memory object as shown below. The offset and size of the mapping must match that specified when creating the mapping using the corresponding Direct3D 11 API. All mapped device pointers must be freed using cudaFree().
void * mapBufferOntoExternalMemory(cudaExternalMemory_t extMem, unsigned long long offset, unsigned long long size) {
void *ptr = NULL;
cudaExternalMemoryBufferDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.offset = offset;
desc.size = size;
cudaExternalMemoryGetMappedBuffer(&ptr, extMem, &desc);
// Note: ‘ptr’ must eventually be freed using cudaFree()
return ptr;
}
3.2.16.4.4. Mapping Mipmapped Arrays onto Imported Memory Objects
A CUDA mipmapped array can be mapped onto an imported memory object as shown below. The offset, dimensions, format and number of mip levels must match that specified when creating the mapping using the corresponding Direct3D 11 API. Additionally, if the mipmapped array can be bound as a render target in Direct3D 12, the flag cudaArrayColorAttachment must be set. All mapped mipmapped arrays must be freed using cudaFreeMipmappedArray(). The following code sample shows how to convert Direct3D 11 parameters into the corresponding CUDA parameters when mapping mipmapped arrays onto imported memory objects.
cudaMipmappedArray_t mapMipmappedArrayOntoExternalMemory(cudaExternalMemory_t extMem, unsigned long long offset, cudaChannelFormatDesc *formatDesc, cudaExtent *extent, unsigned int flags, unsigned int numLevels) {
cudaMipmappedArray_t mipmap = NULL;
cudaExternalMemoryMipmappedArrayDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.offset = offset;
desc.formatDesc = *formatDesc;
desc.extent = *extent;
desc.flags = flags;
desc.numLevels = numLevels;
// Note: 'mipmap' must eventually be freed using cudaFreeMipmappedArray()
cudaExternalMemoryGetMappedMipmappedArray(&mipmap, extMem, &desc);
return mipmap;
}
cudaChannelFormatDesc getCudaChannelFormatDescForDxgiFormat(DXGI_FORMAT dxgiFormat)
{
cudaChannelFormatDesc d;
memset(&d, 0, sizeof(d));
switch (dxgiFormat) {
case DXGI_FORMAT_R8_UINT: d.x = 8; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R8_SINT: d.x = 8; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R8G8_UINT: d.x = 8; d.y = 8; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R8G8_SINT: d.x = 8; d.y = 8; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R8G8B8A8_UINT: d.x = 8; d.y = 8; d.z = 8; d.w = 8; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R8G8B8A8_SINT: d.x = 8; d.y = 8; d.z = 8; d.w = 8; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R16_UINT: d.x = 16; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R16_SINT: d.x = 16; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R16G16_UINT: d.x = 16; d.y = 16; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R16G16_SINT: d.x = 16; d.y = 16; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R16G16B16A16_UINT: d.x = 16; d.y = 16; d.z = 16; d.w = 16; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R16G16B16A16_SINT: d.x = 16; d.y = 16; d.z = 16; d.w = 16; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R32_UINT: d.x = 32; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R32_SINT: d.x = 32; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R32_FLOAT: d.x = 32; d.y = 0; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindFloat; break;
case DXGI_FORMAT_R32G32_UINT: d.x = 32; d.y = 32; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R32G32_SINT: d.x = 32; d.y = 32; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R32G32_FLOAT: d.x = 32; d.y = 32; d.z = 0; d.w = 0; d.f = cudaChannelFormatKindFloat; break;
case DXGI_FORMAT_R32G32B32A32_UINT: d.x = 32; d.y = 32; d.z = 32; d.w = 32; d.f = cudaChannelFormatKindUnsigned; break;
case DXGI_FORMAT_R32G32B32A32_SINT: d.x = 32; d.y = 32; d.z = 32; d.w = 32; d.f = cudaChannelFormatKindSigned; break;
case DXGI_FORMAT_R32G32B32A32_FLOAT: d.x = 32; d.y = 32; d.z = 32; d.w = 32; d.f = cudaChannelFormatKindFloat; break;
default: assert(0);
}
return d;
}
cudaExtent getCudaExtentForD3D11Extent(UINT64 width, UINT height, UINT16 depthOrArraySize, D3D12_SRV_DIMENSION d3d11SRVDimension) {
cudaExtent e = { 0, 0, 0 };
switch (d3d11SRVDimension) {
case D3D11_SRV_DIMENSION_TEXTURE1D: e.width = width; e.height = 0; e.depth = 0; break;
case D3D11_SRV_DIMENSION_TEXTURE2D: e.width = width; e.height = height; e.depth = 0; break;
case D3D11_SRV_DIMENSION_TEXTURE3D: e.width = width; e.height = height; e.depth = depthOrArraySize; break;
case D3D11_SRV_DIMENSION_TEXTURECUBE: e.width = width; e.height = height; e.depth = depthOrArraySize; break;
case D3D11_SRV_DIMENSION_TEXTURE1DARRAY: e.width = width; e.height = 0; e.depth = depthOrArraySize; break;
case D3D11_SRV_DIMENSION_TEXTURE2DARRAY: e.width = width; e.height = height; e.depth = depthOrArraySize; break;
case D3D11_SRV_DIMENSION_TEXTURECUBEARRAY: e.width = width; e.height = height; e.depth = depthOrArraySize; break;
default: assert(0);
}
return e;
}
unsigned int getCudaMipmappedArrayFlagsForD3D12Resource(D3D11_SRV_DIMENSION d3d11SRVDimension, D3D11_BIND_FLAG d3d11BindFlags, bool allowSurfaceLoadStore) {
unsigned int flags = 0;
switch (d3d11SRVDimension) {
case D3D11_SRV_DIMENSION_TEXTURECUBE: flags |= cudaArrayCubemap; break;
case D3D11_SRV_DIMENSION_TEXTURECUBEARRAY: flags |= cudaArrayCubemap | cudaArrayLayered; break;
case D3D11_SRV_DIMENSION_TEXTURE1DARRAY: flags |= cudaArrayLayered; break;
case D3D11_SRV_DIMENSION_TEXTURE2DARRAY: flags |= cudaArrayLayered; break;
default: break;
}
if (d3d11BindFlags & D3D11_BIND_RENDER_TARGET) {
flags |= cudaArrayColorAttachment;
}
if (allowSurfaceLoadStore) {
flags |= cudaArraySurfaceLoadStore;
}
return flags;
}
3.2.16.4.5. Importing Synchronization Objects
A shareable Direct3D 11 fence object, created by setting the flag D3D11_FENCE_FLAG_SHARED in the call to ID3D11Device5::CreateFence, can be imported into CUDA using the NT handle associated with that object as shown below. Note that it is the application’s responsibility to close the handle when it is not required anymore. The NT handle holds a reference to the resource, so it must be explicitly freed before the underlying semaphore can be freed.
cudaExternalSemaphore_t importD3D11FenceFromNTHandle(HANDLE handle) {
cudaExternalSemaphore_t extSem = NULL;
cudaExternalSemaphoreHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalSemaphoreHandleTypeD3D11Fence;
desc.handle.win32.handle = handle;
cudaImportExternalSemaphore(&extSem, &desc);
// Input parameter 'handle' should be closed if it's not needed anymore
CloseHandle(handle);
return extSem;
}
A shareable Direct3D 11 fence object can also be imported using a named handle if one exists as shown below.
cudaExternalSemaphore_t importD3D11FenceFromNamedNTHandle(LPCWSTR name) {
cudaExternalSemaphore_t extSem = NULL;
cudaExternalSemaphoreHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalSemaphoreHandleTypeD3D11Fence;
desc.handle.win32.name = (void *)name;
cudaImportExternalSemaphore(&extSem, &desc);
return extSem;
}
A shareable Direct3D 11 keyed mutex object associated with a shareable Direct3D 11 resource, viz, IDXGIKeyedMutex, created by setting the flag D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX, can be imported into CUDA using the NT handle associated with that object as shown below. Note that it is the application’s responsibility to close the handle when it is not required anymore. The NT handle holds a reference to the resource, so it must be explicitly freed before the underlying semaphore can be freed.
cudaExternalSemaphore_t importD3D11KeyedMutexFromNTHandle(HANDLE handle) {
cudaExternalSemaphore_t extSem = NULL;
cudaExternalSemaphoreHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalSemaphoreHandleTypeKeyedMutex;
desc.handle.win32.handle = handle;
cudaImportExternalSemaphore(&extSem, &desc);
// Input parameter 'handle' should be closed if it's not needed anymore
CloseHandle(handle);
return extSem;
}
A shareable Direct3D 11 keyed mutex object can also be imported using a named handle if one exists as shown below.
cudaExternalSemaphore_t importD3D11KeyedMutexFromNamedNTHandle(LPCWSTR name) {
cudaExternalSemaphore_t extSem = NULL;
cudaExternalSemaphoreHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalSemaphoreHandleTypeKeyedMutex;
desc.handle.win32.name = (void *)name;
cudaImportExternalSemaphore(&extSem, &desc);
return extSem;
}
A shareable Direct3D 11 keyed mutex object can be imported into CUDA using the globally shared D3DKMT handle associated with that object as shown below. Since a globally shared D3DKMT handle does not hold a reference to the underlying memory it is automatically destroyed when all other references to the resource are destroyed.
cudaExternalSemaphore_t importD3D11FenceFromKMTHandle(HANDLE handle) {
cudaExternalSemaphore_t extSem = NULL;
cudaExternalSemaphoreHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalSemaphoreHandleTypeKeyedMutexKmt;
desc.handle.win32.handle = handle;
cudaImportExternalSemaphore(&extSem, &desc);
// Input parameter 'handle' should be closed if it's not needed anymore
CloseHandle(handle);
return extSem;
}
3.2.16.4.6. Signaling/Waiting on Imported Synchronization Objects
An imported Direct3D 11 fence object can be signaled as shown below. Signaling such a fence object sets its value to the one specified. The corresponding wait that waits on this signal must be issued in Direct3D 11. Additionally, the wait that waits on this signal must be issued after this signal has been issued.
void signalExternalSemaphore(cudaExternalSemaphore_t extSem, unsigned long long value, cudaStream_t stream) {
cudaExternalSemaphoreSignalParams params = {};
memset(¶ms, 0, sizeof(params));
params.params.fence.value = value;
cudaSignalExternalSemaphoresAsync(&extSem, ¶ms, 1, stream);
}
An imported Direct3D 11 fence object can be waited on as shown below. Waiting on such a fence object waits until its value becomes greater than or equal to the specified value. The corresponding signal that this wait is waiting on must be issued in Direct3D 11. Additionally, the signal must be issued before this wait can be issued.
void waitExternalSemaphore(cudaExternalSemaphore_t extSem, unsigned long long value, cudaStream_t stream) {
cudaExternalSemaphoreWaitParams params = {};
memset(¶ms, 0, sizeof(params));
params.params.fence.value = value;
cudaWaitExternalSemaphoresAsync(&extSem, ¶ms, 1, stream);
}
An imported Direct3D 11 keyed mutex object can be signaled as shown below. Signaling such a keyed mutex object by specifying a key value releases the keyed mutex for that value. The corresponding wait that waits on this signal must be issued in Direct3D 11 with the same key value. Additionally, the Direct3D 11 wait must be issued after this signal has been issued.
void signalExternalSemaphore(cudaExternalSemaphore_t extSem, unsigned long long key, cudaStream_t stream) {
cudaExternalSemaphoreSignalParams params = {};
memset(¶ms, 0, sizeof(params));
params.params.keyedmutex.key = key;
cudaSignalExternalSemaphoresAsync(&extSem, ¶ms, 1, stream);
}
An imported Direct3D 11 keyed mutex object can be waited on as shown below. A timeout value in milliseconds is needed when waiting on such a keyed mutex. The wait operation waits until the keyed mutex value is equal to the specified key value or until the timeout has elapsed. The timeout interval can also be an infinite value. In case an infinite value is specified the timeout never elapses. The windows INFINITE macro must be used to specify an infinite timeout. The corresponding signal that this wait is waiting on must be issued in Direct3D 11. Additionally, the Direct3D 11 signal must be issued before this wait can be issued.
void waitExternalSemaphore(cudaExternalSemaphore_t extSem, unsigned long long key, unsigned int timeoutMs, cudaStream_t stream) {
cudaExternalSemaphoreWaitParams params = {};
memset(¶ms, 0, sizeof(params));
params.params.keyedmutex.key = key;
params.params.keyedmutex.timeoutMs = timeoutMs;
cudaWaitExternalSemaphoresAsync(&extSem, ¶ms, 1, stream);
}
3.2.16.5. NVIDIA Software Communication Interface Interoperability (NVSCI)
NvSciBuf and NvSciSync are interfaces developed for serving the following purposes:
NvSciBuf: Allows applications to allocate and exchange buffers in memory
NvSciSync: Allows applications to manage synchronization objects at operation boundaries
More details on these interfaces are available at: https://docs.nvidia.com/drive.
3.2.16.5.1. Importing Memory Objects
For allocating an NvSciBuf object compatible with a given CUDA device, the corresponding GPU id must be set with NvSciBufGeneralAttrKey_GpuId in the NvSciBuf attribute list as shown below. Optionally, applications can specify the following attributes -
NvSciBufGeneralAttrKey_NeedCpuAccess: Specifies if CPU access is required for the bufferNvSciBufRawBufferAttrKey_Align: Specifies the alignment requirement ofNvSciBufType_RawBufferNvSciBufGeneralAttrKey_RequiredPerm: Different access permissions can be configured for different UMDs per NvSciBuf memory object instance. For example, to provide the GPU with read-only access permissions to the buffer, create a duplicate NvSciBuf object usingNvSciBufObjDupWithReducePerm()withNvSciBufAccessPerm_Readonlyas the input parameter. Then import this newly created duplicate object with reduced permission into CUDA as shownNvSciBufGeneralAttrKey_EnableGpuCache: To control GPU L2 cacheabilityNvSciBufGeneralAttrKey_EnableGpuCompression: To specify GPU compression
Note
For more details on these attributes and their valid input options, refer to NvSciBuf Documentation.
The following code snippet illustrates their sample usage.
NvSciBufObj createNvSciBufObject() {
// Raw Buffer Attributes for CUDA
NvSciBufType bufType = NvSciBufType_RawBuffer;
uint64_t rawsize = SIZE;
uint64_t align = 0;
bool cpuaccess_flag = true;
NvSciBufAttrValAccessPerm perm = NvSciBufAccessPerm_ReadWrite;
NvSciRmGpuId gpuid[] ={};
CUuuid uuid;
cuDeviceGetUuid(&uuid, dev));
memcpy(&gpuid[0].bytes, &uuid.bytes, sizeof(uuid.bytes));
// Disable cache on dev
NvSciBufAttrValGpuCache gpuCache[] = {{gpuid[0], false}};
NvSciBufAttrValGpuCompression gpuCompression[] = {{gpuid[0], NvSciBufCompressionType_GenericCompressible}};
// Fill in values
NvSciBufAttrKeyValuePair rawbuffattrs[] = {
{ NvSciBufGeneralAttrKey_Types, &bufType, sizeof(bufType) },
{ NvSciBufRawBufferAttrKey_Size, &rawsize, sizeof(rawsize) },
{ NvSciBufRawBufferAttrKey_Align, &align, sizeof(align) },
{ NvSciBufGeneralAttrKey_NeedCpuAccess, &cpuaccess_flag, sizeof(cpuaccess_flag) },
{ NvSciBufGeneralAttrKey_RequiredPerm, &perm, sizeof(perm) },
{ NvSciBufGeneralAttrKey_GpuId, &gpuid, sizeof(gpuid) },
{ NvSciBufGeneralAttrKey_EnableGpuCache &gpuCache, sizeof(gpuCache) },
{ NvSciBufGeneralAttrKey_EnableGpuCompression &gpuCompression, sizeof(gpuCompression) }
};
// Create list by setting attributes
err = NvSciBufAttrListSetAttrs(attrListBuffer, rawbuffattrs,
sizeof(rawbuffattrs)/sizeof(NvSciBufAttrKeyValuePair));
NvSciBufAttrListCreate(NvSciBufModule, &attrListBuffer);
// Reconcile And Allocate
NvSciBufAttrListReconcile(&attrListBuffer, 1, &attrListReconciledBuffer,
&attrListConflictBuffer)
NvSciBufObjAlloc(attrListReconciledBuffer, &bufferObjRaw);
return bufferObjRaw;
}
NvSciBufObj bufferObjRo; // Readonly NvSciBuf memory obj
// Create a duplicate handle to the same memory buffer with reduced permissions
NvSciBufObjDupWithReducePerm(bufferObjRaw, NvSciBufAccessPerm_Readonly, &bufferObjRo);
return bufferObjRo;
The allocated NvSciBuf memory object can be imported in CUDA using the NvSciBufObj handle as shown below. Application should query the allocated NvSciBufObj for attributes required for filling CUDA External Memory Descriptor. Note that the attribute list and NvSciBuf objects should be maintained by the application. If the NvSciBuf object imported into CUDA is also mapped by other drivers, then based on NvSciBufGeneralAttrKey_GpuSwNeedCacheCoherency output attribute value the application must use NvSciSync objects (refer to Importing Synchronization Objects) as appropriate barriers to maintain coherence between CUDA and the other drivers.
Note
For more details on how to allocate and maintain NvSciBuf objects refer to NvSciBuf API Documentation.
cudaExternalMemory_t importNvSciBufObject (NvSciBufObj bufferObjRaw) {
/*************** Query NvSciBuf Object **************/
NvSciBufAttrKeyValuePair bufattrs[] = {
{ NvSciBufRawBufferAttrKey_Size, NULL, 0 },
{ NvSciBufGeneralAttrKey_GpuSwNeedCacheCoherency, NULL, 0 },
{ NvSciBufGeneralAttrKey_EnableGpuCompression, NULL, 0 }
};
NvSciBufAttrListGetAttrs(retList, bufattrs,
sizeof(bufattrs)/sizeof(NvSciBufAttrKeyValuePair)));
ret_size = *(static_cast<const uint64_t*>(bufattrs[0].value));
// Note cache and compression are per GPU attributes, so read values for specific gpu by comparing UUID
// Read cacheability granted by NvSciBuf
int numGpus = bufattrs[1].len / sizeof(NvSciBufAttrValGpuCache);
NvSciBufAttrValGpuCache[] cacheVal = (NvSciBufAttrValGpuCache *)bufattrs[1].value;
bool ret_cacheVal;
for (int i = 0; i < numGpus; i++) {
if (memcmp(gpuid[0].bytes, cacheVal[i].gpuId.bytes, sizeof(CUuuid)) == 0) {
ret_cacheVal = cacheVal[i].cacheability);
}
}
// Read compression granted by NvSciBuf
numGpus = bufattrs[2].len / sizeof(NvSciBufAttrValGpuCompression);
NvSciBufAttrValGpuCompression[] compVal = (NvSciBufAttrValGpuCompression *)bufattrs[2].value;
NvSciBufCompressionType ret_compVal;
for (int i = 0; i < numGpus; i++) {
if (memcmp(gpuid[0].bytes, compVal[i].gpuId.bytes, sizeof(CUuuid)) == 0) {
ret_compVal = compVal[i].compressionType);
}
}
/*************** NvSciBuf Registration With CUDA **************/
// Fill up CUDA_EXTERNAL_MEMORY_HANDLE_DESC
cudaExternalMemoryHandleDesc memHandleDesc;
memset(&memHandleDesc, 0, sizeof(memHandleDesc));
memHandleDesc.type = cudaExternalMemoryHandleTypeNvSciBuf;
memHandleDesc.handle.nvSciBufObject = bufferObjRaw;
// Set the NvSciBuf object with required access permissions in this step
memHandleDesc.handle.nvSciBufObject = bufferObjRo;
memHandleDesc.size = ret_size;
cudaImportExternalMemory(&extMemBuffer, &memHandleDesc);
return extMemBuffer;
}
3.2.16.5.2. Mapping Buffers onto Imported Memory Objects
A device pointer can be mapped onto an imported memory object as shown below. The offset and size of the mapping can be filled as per the attributes of the allocated NvSciBufObj. All mapped device pointers must be freed using cudaFree().
void * mapBufferOntoExternalMemory(cudaExternalMemory_t extMem, unsigned long long offset, unsigned long long size) {
void *ptr = NULL;
cudaExternalMemoryBufferDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.offset = offset;
desc.size = size;
cudaExternalMemoryGetMappedBuffer(&ptr, extMem, &desc);
// Note: 'ptr' must eventually be freed using cudaFree()
return ptr;
}
3.2.16.5.3. Mapping Mipmapped Arrays onto Imported Memory Objects
A CUDA mipmapped array can be mapped onto an imported memory object as shown below. The offset, dimensions and format can be filled as per the attributes of the allocated NvSciBufObj. All mapped mipmapped arrays must be freed using cudaFreeMipmappedArray(). The following code sample shows how to convert NvSciBuf attributes into the corresponding CUDA parameters when mapping mipmapped arrays onto imported memory objects.
Note
The number of mip levels must be 1.
cudaMipmappedArray_t mapMipmappedArrayOntoExternalMemory(cudaExternalMemory_t extMem, unsigned long long offset, cudaChannelFormatDesc *formatDesc, cudaExtent *extent, unsigned int flags, unsigned int numLevels) {
cudaMipmappedArray_t mipmap = NULL;
cudaExternalMemoryMipmappedArrayDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.offset = offset;
desc.formatDesc = *formatDesc;
desc.extent = *extent;
desc.flags = flags;
desc.numLevels = numLevels;
// Note: 'mipmap' must eventually be freed using cudaFreeMipmappedArray()
cudaExternalMemoryGetMappedMipmappedArray(&mipmap, extMem, &desc);
return mipmap;
}
3.2.16.5.4. Importing Synchronization Objects
NvSciSync attributes that are compatible with a given CUDA device can be generated using cudaDeviceGetNvSciSyncAttributes(). The returned attribute list can be used to create a NvSciSyncObj that is guaranteed compatibility with a given CUDA device.
NvSciSyncObj createNvSciSyncObject() {
NvSciSyncObj nvSciSyncObj
int cudaDev0 = 0;
int cudaDev1 = 1;
NvSciSyncAttrList signalerAttrList = NULL;
NvSciSyncAttrList waiterAttrList = NULL;
NvSciSyncAttrList reconciledList = NULL;
NvSciSyncAttrList newConflictList = NULL;
NvSciSyncAttrListCreate(module, &signalerAttrList);
NvSciSyncAttrListCreate(module, &waiterAttrList);
NvSciSyncAttrList unreconciledList[2] = {NULL, NULL};
unreconciledList[0] = signalerAttrList;
unreconciledList[1] = waiterAttrList;
cudaDeviceGetNvSciSyncAttributes(signalerAttrList, cudaDev0, CUDA_NVSCISYNC_ATTR_SIGNAL);
cudaDeviceGetNvSciSyncAttributes(waiterAttrList, cudaDev1, CUDA_NVSCISYNC_ATTR_WAIT);
NvSciSyncAttrListReconcile(unreconciledList, 2, &reconciledList, &newConflictList);
NvSciSyncObjAlloc(reconciledList, &nvSciSyncObj);
return nvSciSyncObj;
}
An NvSciSync object (created as above) can be imported into CUDA using the NvSciSyncObj handle as shown below. Note that ownership of the NvSciSyncObj handle continues to lie with the application even after it is imported.
cudaExternalSemaphore_t importNvSciSyncObject(void* nvSciSyncObj) {
cudaExternalSemaphore_t extSem = NULL;
cudaExternalSemaphoreHandleDesc desc = {};
memset(&desc, 0, sizeof(desc));
desc.type = cudaExternalSemaphoreHandleTypeNvSciSync;
desc.handle.nvSciSyncObj = nvSciSyncObj;
cudaImportExternalSemaphore(&extSem, &desc);
// Deleting/Freeing the nvSciSyncObj beyond this point will lead to undefined behavior in CUDA
return extSem;
}
3.2.16.5.5. Signaling/Waiting on Imported Synchronization Objects
An imported NvSciSyncObj object can be signaled as outlined below. Signaling NvSciSync backed semaphore object initializes the fence parameter passed as input. This fence parameter is waited upon by a wait operation that corresponds to the aforementioned signal. Additionally, the wait that waits on this signal must be issued after this signal has been issued. If the flags are set to cudaExternalSemaphoreSignalSkipNvSciBufMemSync then memory synchronization operations (over all the imported NvSciBuf in this process) that are executed as a part of the signal operation by default are skipped. When NvsciBufGeneralAttrKey_GpuSwNeedCacheCoherency is FALSE, this flag should be set.
void signalExternalSemaphore(cudaExternalSemaphore_t extSem, cudaStream_t stream, void *fence) {
cudaExternalSemaphoreSignalParams signalParams = {};
memset(&signalParams, 0, sizeof(signalParams));
signalParams.params.nvSciSync.fence = (void*)fence;
signalParams.flags = 0; //OR cudaExternalSemaphoreSignalSkipNvSciBufMemSync
cudaSignalExternalSemaphoresAsync(&extSem, &signalParams, 1, stream);
}
An imported NvSciSyncObj object can be waited upon as outlined below. Waiting on NvSciSync backed semaphore object waits until the input fence parameter is signaled by the corresponding signaler. Additionally, the signal must be issued before the wait can be issued. If the flags are set to cudaExternalSemaphoreWaitSkipNvSciBufMemSync then memory synchronization operations (over all the imported NvSciBuf in this process) that are executed as a part of the signal operation by default are skipped. When NvsciBufGeneralAttrKey_GpuSwNeedCacheCoherency is FALSE, this flag should be set.
void waitExternalSemaphore(cudaExternalSemaphore_t extSem, cudaStream_t stream, void *fence) {
cudaExternalSemaphoreWaitParams waitParams = {};
memset(&waitParams, 0, sizeof(waitParams));
waitParams.params.nvSciSync.fence = (void*)fence;
waitParams.flags = 0; //OR cudaExternalSemaphoreWaitSkipNvSciBufMemSync
cudaWaitExternalSemaphoresAsync(&extSem, &waitParams, 1, stream);
}
3.3. Versioning and Compatibility
There are two version numbers that developers should care about when developing a CUDA application: The compute capability that describes the general specifications and features of the compute device (see Compute Capability) and the version of the CUDA driver API that describes the features supported by the driver API and runtime.
The version of the driver API is defined in the driver header file as CUDA_VERSION. It allows developers to check whether their application requires a newer device driver than the one currently installed. This is important, because the driver API is backward compatible, meaning that applications, plug-ins, and libraries (including the CUDA runtime) compiled against a particular version of the driver API will continue to work on subsequent device driver releases as illustrated in Figure 12. The driver API is not forward compatible, which means that applications, plug-ins, and libraries (including the CUDA runtime) compiled against a particular version of the driver API will not work on previous versions of the device driver.
It is important to note that there are limitations on the mixing and matching of versions that is supported:
Since only one version of the CUDA Driver can be installed at a time on a system, the installed driver must be of the same or higher version than the maximum Driver API version against which any application, plug-ins, or libraries that must run on that system were built.
All plug-ins and libraries used by an application must use the same version of the CUDA Runtime unless they statically link to the Runtime, in which case multiple versions of the runtime can coexist in the same process space. Note that if
nvccis used to link the application, the static version of the CUDA Runtime library will be used by default, and all CUDA Toolkit libraries are statically linked against the CUDA Runtime.All plug-ins and libraries used by an application must use the same version of any libraries that use the runtime (such as cuFFT, cuBLAS, …) unless statically linking to those libraries.
Figure 25 The Driver API Is Backward but Not Forward Compatible
For Tesla GPU products, CUDA 10 introduced a new forward-compatible upgrade path for the user-mode components of the CUDA Driver. This feature is described in CUDA Compatibility. The requirements on the CUDA Driver version described here apply to the version of the user-mode components.
3.4. Compute Modes
On Tesla solutions running Windows Server 2008 and later or Linux, one can set any device in a system in one of the three following modes using NVIDIA’s System Management Interface (nvidia-smi), which is a tool distributed as part of the driver:
Default compute mode: Multiple host threads can use the device (by calling
cudaSetDevice()on this device, when using the runtime API, or by making current a context associated to the device, when using the driver API) at the same time.Exclusive-process compute mode: Only one CUDA context may be created on the device across all processes in the system. The context may be current to as many threads as desired within the process that created that context.
Prohibited compute mode: No CUDA context can be created on the device.
This means, in particular, that a host thread using the runtime API without explicitly calling cudaSetDevice() might be associated with a device other than device 0 if device 0 turns out to be in prohibited mode or in exclusive-process mode and used by another process. cudaSetValidDevices() can be used to set a device from a prioritized list of devices.
Note also that, for devices featuring the Pascal architecture onwards (compute capability with major revision number 6 and higher), there exists support for Compute Preemption. This allows compute tasks to be preempted at instruction-level granularity, rather than thread block granularity as in prior Maxwell and Kepler GPU architecture, with the benefit that applications with long-running kernels can be prevented from either monopolizing the system or timing out. However, there will be context switch overheads associated with Compute Preemption, which is automatically enabled on those devices for which support exists. The individual attribute query function cudaDeviceGetAttribute() with the attribute cudaDevAttrComputePreemptionSupported can be used to determine if the device in use supports Compute Preemption. Users wishing to avoid context switch overheads associated with different processes can ensure that only one process is active on the GPU by selecting exclusive-process mode.
Applications may query the compute mode of a device by checking the computeMode device property (see Device Enumeration).
3.5. Mode Switches
GPUs that have a display output dedicate some DRAM memory to the so-called primary surface, which is used to refresh the display device whose output is viewed by the user. When users initiate a mode switch of the display by changing the resolution or bit depth of the display (using NVIDIA control panel or the Display control panel on Windows), the amount of memory needed for the primary surface changes. For example, if the user changes the display resolution from 1280x1024x32-bit to 1600x1200x32-bit, the system must dedicate 7.68 MB to the primary surface rather than 5.24 MB. (Full-screen graphics applications running with anti-aliasing enabled may require much more display memory for the primary surface.) On Windows, other events that may initiate display mode switches include launching a full-screen DirectX application, hitting Alt+Tab to task switch away from a full-screen DirectX application, or hitting Ctrl+Alt+Del to lock the computer.
If a mode switch increases the amount of memory needed for the primary surface, the system may have to cannibalize memory allocations dedicated to CUDA applications. Therefore, a mode switch results in any call to the CUDA runtime to fail and return an invalid context error.
3.6. Tesla Compute Cluster Mode for Windows
Using NVIDIA’s System Management Interface (nvidia-smi), the Windows device driver can be put in TCC (Tesla Compute Cluster) mode for devices of the Tesla and Quadro Series.
TCC mode removes support for any graphics functionality.
4. Hardware Implementation
The NVIDIA GPU architecture is built around a scalable array of multithreaded Streaming Multiprocessors (SMs). When a CUDA program on the host CPU invokes a kernel grid, the blocks of the grid are enumerated and distributed to multiprocessors with available execution capacity. The threads of a thread block execute concurrently on one multiprocessor, and multiple thread blocks can execute concurrently on one multiprocessor. As thread blocks terminate, new blocks are launched on the vacated multiprocessors.
A multiprocessor is designed to execute hundreds of threads concurrently. To manage such a large number of threads, it employs a unique architecture called SIMT (Single-Instruction, Multiple-Thread) that is described in SIMT Architecture. The instructions are pipelined, leveraging instruction-level parallelism within a single thread, as well as extensive thread-level parallelism through simultaneous hardware multithreading as detailed in Hardware Multithreading. Unlike CPU cores, they are issued in order and there is no branch prediction or speculative execution.
SIMT Architecture and Hardware Multithreading describe the architecture features of the streaming multiprocessor that are common to all devices. Compute Capability 5.x, Compute Capability 6.x, and Compute Capability 7.x provide the specifics for devices of compute capabilities 5.x, 6.x, and 7.x respectively.
The NVIDIA GPU architecture uses a little-endian representation.
4.1. SIMT Architecture
The multiprocessor creates, manages, schedules, and executes threads in groups of 32 parallel threads called warps. Individual threads composing a warp start together at the same program address, but they have their own instruction address counter and register state and are therefore free to branch and execute independently. The term warp originates from weaving, the first parallel thread technology. A half-warp is either the first or second half of a warp. A quarter-warp is either the first, second, third, or fourth quarter of a warp.
When a multiprocessor is given one or more thread blocks to execute, it partitions them into warps and each warp gets scheduled by a warp scheduler for execution. The way a block is partitioned into warps is always the same; each warp contains threads of consecutive, increasing thread IDs with the first warp containing thread 0. Thread Hierarchy describes how thread IDs relate to thread indices in the block.
A warp executes one common instruction at a time, so full efficiency is realized when all 32 threads of a warp agree on their execution path. If threads of a warp diverge via a data-dependent conditional branch, the warp executes each branch path taken, disabling threads that are not on that path. Branch divergence occurs only within a warp; different warps execute independently regardless of whether they are executing common or disjoint code paths.
The SIMT architecture is akin to SIMD (Single Instruction, Multiple Data) vector organizations in that a single instruction controls multiple processing elements. A key difference is that SIMD vector organizations expose the SIMD width to the software, whereas SIMT instructions specify the execution and branching behavior of a single thread. In contrast with SIMD vector machines, SIMT enables programmers to write thread-level parallel code for independent, scalar threads, as well as data-parallel code for coordinated threads. For the purposes of correctness, the programmer can essentially ignore the SIMT behavior; however, substantial performance improvements can be realized by taking care that the code seldom requires threads in a warp to diverge. In practice, this is analogous to the role of cache lines in traditional code: Cache line size can be safely ignored when designing for correctness but must be considered in the code structure when designing for peak performance. Vector architectures, on the other hand, require the software to coalesce loads into vectors and manage divergence manually.
Prior to NVIDIA Volta, warps used a single program counter shared amongst all 32 threads in the warp together with an active mask specifying the active threads of the warp. As a result, threads from the same warp in divergent regions or different states of execution cannot signal each other or exchange data, and algorithms requiring fine-grained sharing of data guarded by locks or mutexes can easily lead to deadlock, depending on which warp the contending threads come from.
Starting with the NVIDIA Volta architecture, Independent Thread Scheduling allows full concurrency between threads, regardless of warp. With Independent Thread Scheduling, the GPU maintains execution state per thread, including a program counter and call stack, and can yield execution at a per-thread granularity, either to make better use of execution resources or to allow one thread to wait for data to be produced by another. A schedule optimizer determines how to group active threads from the same warp together into SIMT units. This retains the high throughput of SIMT execution as in prior NVIDIA GPUs, but with much more flexibility: threads can now diverge and reconverge at sub-warp granularity.
Independent Thread Scheduling can lead to a rather different set of threads participating in the executed code than intended if the developer made assumptions about warp-synchronicity2 of previous hardware architectures. In particular, any warp-synchronous code (such as synchronization-free, intra-warp reductions) should be revisited to ensure compatibility with NVIDIA Volta and beyond. See Compute Capability 7.x for further details.
Note
The threads of a warp that are participating in the current instruction are called the active threads, whereas threads not on the current instruction are inactive (disabled). Threads can be inactive for a variety of reasons including having exited earlier than other threads of their warp, having taken a different branch path than the branch path currently executed by the warp, or being the last threads of a block whose number of threads is not a multiple of the warp size.
If a non-atomic instruction executed by a warp writes to the same location in global or shared memory for more than one of the threads of the warp, the number of serialized writes that occur to that location varies depending on the compute capability of the device (see Compute Capability 5.x, Compute Capability 6.x, and Compute Capability 7.x), and which thread performs the final write is undefined.
If an atomic instruction executed by a warp reads, modifies, and writes to the same location in global memory for more than one of the threads of the warp, each read/modify/write to that location occurs and they are all serialized, but the order in which they occur is undefined.
4.2. Hardware Multithreading
The execution context (program counters, registers, and so on) for each warp processed by a multiprocessor is maintained on-chip during the entire lifetime of the warp. Therefore, switching from one execution context to another has no cost, and at every instruction issue time, a warp scheduler selects a warp that has threads ready to execute its next instruction (the active threads of the warp) and issues the instruction to those threads.
In particular, each multiprocessor has a set of 32-bit registers that are partitioned among the warps, and a parallel data cache or shared memory that is partitioned among the thread blocks.
The number of blocks and warps that can reside and be processed together on the multiprocessor for a given kernel depends on the amount of registers and shared memory used by the kernel and the amount of registers and shared memory available on the multiprocessor. There are also a maximum number of resident blocks and a maximum number of resident warps per multiprocessor. These limits as well the amount of registers and shared memory available on the multiprocessor are a function of the compute capability of the device and are given in Compute Capabilities. If there are not enough registers or shared memory available per multiprocessor to process at least one block, the kernel will fail to launch.
The total number of warps in a block is as follows:
\(\text{ceil}\left( \frac{T}{W_{size}},1 \right)\)
T is the number of threads per block,
Wsize is the warp size, which is equal to 32,
ceil(x, y) is equal to x rounded up to the nearest multiple of y.
The total number of registers and total amount of shared memory allocated for a block are documented in the CUDA Occupancy Calculator provided in the CUDA Toolkit.
- 2
-
The term warp-synchronous refers to code that implicitly assumes threads in the same warp are synchronized at every instruction.
5. Performance Guidelines
5.1. Overall Performance Optimization Strategies
Performance optimization revolves around four basic strategies:
Maximize parallel execution to achieve maximum utilization;
Optimize memory usage to achieve maximum memory throughput;
Optimize instruction usage to achieve maximum instruction throughput;
Minimize memory thrashing.
Which strategies will yield the best performance gain for a particular portion of an application depends on the performance limiters for that portion; optimizing instruction usage of a kernel that is mostly limited by memory accesses will not yield any significant performance gain, for example. Optimization efforts should therefore be constantly directed by measuring and monitoring the performance limiters, for example using the CUDA profiler. Also, comparing the floating-point operation throughput or memory throughput—whichever makes more sense—of a particular kernel to the corresponding peak theoretical throughput of the device indicates how much room for improvement there is for the kernel.
5.2. Maximize Utilization
To maximize utilization the application should be structured in a way that it exposes as much parallelism as possible and efficiently maps this parallelism to the various components of the system to keep them busy most of the time.
5.2.1. Application Level
At a high level, the application should maximize parallel execution between the host, the devices, and the bus connecting the host to the devices, by using asynchronous functions calls and streams as described in Asynchronous Concurrent Execution. It should assign to each processor the type of work it does best: serial workloads to the host; parallel workloads to the devices.
For the parallel workloads, at points in the algorithm where parallelism is broken because some threads need to synchronize in order to share data with each other, there are two cases: Either these threads belong to the same block, in which case they should use __syncthreads() and share data through shared memory within the same kernel invocation, or they belong to different blocks, in which case they must share data through global memory using two separate kernel invocations, one for writing to and one for reading from global memory. The second case is much less optimal since it adds the overhead of extra kernel invocations and global memory traffic. Its occurrence should therefore be minimized by mapping the algorithm to the CUDA programming model in such a way that the computations that require inter-thread communication are performed within a single thread block as much as possible.
5.2.2. Device Level
At a lower level, the application should maximize parallel execution between the multiprocessors of a device.
Multiple kernels can execute concurrently on a device, so maximum utilization can also be achieved by using streams to enable enough kernels to execute concurrently as described in Asynchronous Concurrent Execution.
5.2.3. Multiprocessor Level
At an even lower level, the application should maximize parallel execution between the various functional units within a multiprocessor.
As described in Hardware Multithreading, a GPU multiprocessor primarily relies on thread-level parallelism to maximize utilization of its functional units. Utilization is therefore directly linked to the number of resident warps. At every instruction issue time, a warp scheduler selects an instruction that is ready to execute. This instruction can be another independent instruction of the same warp, exploiting instruction-level parallelism, or more commonly an instruction of another warp, exploiting thread-level parallelism. If a ready to execute instruction is selected it is issued to the active threads of the warp. The number of clock cycles it takes for a warp to be ready to execute its next instruction is called the latency, and full utilization is achieved when all warp schedulers always have some instruction to issue for some warp at every clock cycle during that latency period, or in other words, when latency is completely “hidden”. The number of instructions required to hide a latency of L clock cycles depends on the respective throughputs of these instructions (see Arithmetic Instructions for the throughputs of various arithmetic instructions). If we assume instructions with maximum throughput, it is equal to:
4L for devices of compute capability 5.x, 6.1, 6.2, 7.x and 8.x since for these devices, a multiprocessor issues one instruction per warp over one clock cycle for four warps at a time, as mentioned in Compute Capabilities.
2L for devices of compute capability 6.0 since for these devices, the two instructions issued every cycle are one instruction for two different warps.
The most common reason a warp is not ready to execute its next instruction is that the instruction’s input operands are not available yet.
If all input operands are registers, latency is caused by register dependencies, i.e., some of the input operands are written by some previous instruction(s) whose execution has not completed yet. In this case, the latency is equal to the execution time of the previous instruction and the warp schedulers must schedule instructions of other warps during that time. Execution time varies depending on the instruction. On devices of compute capability 7.x, for most arithmetic instructions, it is typically 4 clock cycles. This means that 16 active warps per multiprocessor (4 cycles, 4 warp schedulers) are required to hide arithmetic instruction latencies (assuming that warps execute instructions with maximum throughput, otherwise fewer warps are needed). If the individual warps exhibit instruction-level parallelism, i.e. have multiple independent instructions in their instruction stream, fewer warps are needed because multiple independent instructions from a single warp can be issued back to back.
If some input operand resides in off-chip memory, the latency is much higher: typically hundreds of clock cycles. The number of warps required to keep the warp schedulers busy during such high latency periods depends on the kernel code and its degree of instruction-level parallelism. In general, more warps are required if the ratio of the number of instructions with no off-chip memory operands (i.e., arithmetic instructions most of the time) to the number of instructions with off-chip memory operands is low (this ratio is commonly called the arithmetic intensity of the program).
Another reason a warp is not ready to execute its next instruction is that it is waiting at some memory fence (Memory Fence Functions) or synchronization point (Synchronization Functions). A synchronization point can force the multiprocessor to idle as more and more warps wait for other warps in the same block to complete execution of instructions prior to the synchronization point. Having multiple resident blocks per multiprocessor can help reduce idling in this case, as warps from different blocks do not need to wait for each other at synchronization points.
The number of blocks and warps residing on each multiprocessor for a given kernel call depends on the execution configuration of the call (Execution Configuration), the memory resources of the multiprocessor, and the resource requirements of the kernel as described in Hardware Multithreading. Register and shared memory usage are reported by the compiler when compiling with the --ptxas-options=-v option.
The total amount of shared memory required for a block is equal to the sum of the amount of statically allocated shared memory and the amount of dynamically allocated shared memory.
The number of registers used by a kernel can have a significant impact on the number of resident warps. For example, for devices of compute capability 6.x, if a kernel uses 64
registers and each block has 512 threads and requires very little shared memory, then two blocks (i.e., 32 warps) can reside on the multiprocessor since they require 2x512x64
registers, which exactly matches the number of registers available on the multiprocessor. But as soon as the kernel uses one more register, only one block (i.e., 16 warps) can be
resident since two blocks would require 2x512x65 registers, which are more registers than are available on the multiprocessor. Therefore, the compiler attempts to minimize register
usage while keeping register spilling (see Device Memory Accesses) and the number of instructions to a minimum. Register usage can be
controlled using the maxrregcount compiler option, the __launch_bounds__() qualifier as described in Launch Bounds, or the __maxnreg__()
qualifier as described in Maximum Number of Registers per Thread.
The register file is organized as 32-bit registers. So, each variable stored in a register needs at least one 32-bit register, for example, a double variable uses two 32-bit registers.
The effect of execution configuration on performance for a given kernel call generally depends on the kernel code. Experimentation is therefore recommended. Applications can also parametrize execution configurations based on register file size and shared memory size, which depends on the compute capability of the device, as well as on the number of multiprocessors and memory bandwidth of the device, all of which can be queried using the runtime (see reference manual).
The number of threads per block should be chosen as a multiple of the warp size to avoid wasting computing resources with under-populated warps as much as possible.
5.2.3.1. Occupancy Calculator
Several API functions exist to assist programmers in choosing thread block size and cluster size based on register and shared memory requirements.
-
The occupancy calculator API,
cudaOccupancyMaxActiveBlocksPerMultiprocessor, can provide an occupancy prediction based on the block size and shared memory usage of a kernel. This function reports occupancy in terms of the number of concurrent thread blocks per multiprocessor.Note that this value can be converted to other metrics. Multiplying by the number of warps per block yields the number of concurrent warps per multiprocessor; further dividing concurrent warps by max warps per multiprocessor gives the occupancy as a percentage.
The occupancy-based launch configurator APIs,
cudaOccupancyMaxPotentialBlockSizeandcudaOccupancyMaxPotentialBlockSizeVariableSMem, heuristically calculate an execution configuration that achieves the maximum multiprocessor-level occupancy.The occupancy calculator API,
cudaOccupancyMaxActiveClusters, can provided occupancy prediction based on the cluster size, block size and shared memory usage of a kernel. This function reports occupancy in terms of number of max active clusters of a given size on the GPU present in the system.
The following code sample calculates the occupancy of MyKernel. It then reports the occupancy level with the ratio between concurrent warps versus maximum warps per multiprocessor.
// Device code
__global__ void MyKernel(int *d, int *a, int *b)
{
int idx = threadIdx.x + blockIdx.x * blockDim.x;
d[idx] = a[idx] * b[idx];
}
// Host code
int main()
{
int numBlocks; // Occupancy in terms of active blocks
int blockSize = 32;
// These variables are used to convert occupancy to warps
int device;
cudaDeviceProp prop;
int activeWarps;
int maxWarps;
cudaGetDevice(&device);
cudaGetDeviceProperties(&prop, device);
cudaOccupancyMaxActiveBlocksPerMultiprocessor(
&numBlocks,
MyKernel,
blockSize,
0);
activeWarps = numBlocks * blockSize / prop.warpSize;
maxWarps = prop.maxThreadsPerMultiProcessor / prop.warpSize;
std::cout << "Occupancy: " << (double)activeWarps / maxWarps * 100 << "%" << std::endl;
return 0;
}
The following code sample configures an occupancy-based kernel launch of MyKernel according to the user input.
// Device code
__global__ void MyKernel(int *array, int arrayCount)
{
int idx = threadIdx.x + blockIdx.x * blockDim.x;
if (idx < arrayCount) {
array[idx] *= array[idx];
}
}
// Host code
int launchMyKernel(int *array, int arrayCount)
{
int blockSize; // The launch configurator returned block size
int minGridSize; // The minimum grid size needed to achieve the
// maximum occupancy for a full device
// launch
int gridSize; // The actual grid size needed, based on input
// size
cudaOccupancyMaxPotentialBlockSize(
&minGridSize,
&blockSize,
(void*)MyKernel,
0,
arrayCount);
// Round up according to array size
gridSize = (arrayCount + blockSize - 1) / blockSize;
MyKernel<<<gridSize, blockSize>>>(array, arrayCount);
cudaDeviceSynchronize();
// If interested, the occupancy can be calculated with
// cudaOccupancyMaxActiveBlocksPerMultiprocessor
return 0;
}
The following code sample shows how to use the cluster occupancy API to find the max number of active clusters of a given size. Example code below calucaltes occupancy for cluster of size 2 and 128 threads per block.
Cluster size of 8 is forward compatible starting compute capability 9.0, except on GPU hardware or MIG configurations which are too small to support 8 multiprocessors in which case the maximum cluster size will be reduced. But it is recommended that the users query the maximum cluster size before launching a cluster kernel. Max cluster size can be queried using cudaOccupancyMaxPotentialClusterSize API.
{
cudaLaunchConfig_t config = {0};
config.gridDim = number_of_blocks;
config.blockDim = 128; // threads_per_block = 128
config.dynamicSmemBytes = dynamic_shared_memory_size;
cudaLaunchAttribute attribute[1];
attribute[0].id = cudaLaunchAttributeClusterDimension;
attribute[0].val.clusterDim.x = 2; // cluster_size = 2
attribute[0].val.clusterDim.y = 1;
attribute[0].val.clusterDim.z = 1;
config.attrs = attribute;
config.numAttrs = 1;
int max_cluster_size = 0;
cudaOccupancyMaxPotentialClusterSize(&max_cluster_size, (void *)kernel, &config);
int max_active_clusters = 0;
cudaOccupancyMaxActiveClusters(&max_active_clusters, (void *)kernel, &config);
std::cout << "Max Active Clusters of size 2: " << max_active_clusters << std::endl;
}
The CUDA Nsight Compute User Interface also provides a standalone occupancy calculator and launch configurator implementation in <CUDA_Toolkit_Path>/include/cuda_occupancy.h for any use cases that cannot depend on the CUDA software stack. The Nsight Compute version of the occupancy calculator is particularly useful as a learning tool that visualizes the impact of changes to the parameters that affect occupancy (block size, registers per thread, and shared memory per thread).
5.3. Maximize Memory Throughput
The first step in maximizing overall memory throughput for the application is to minimize data transfers with low bandwidth.
That means minimizing data transfers between the host and the device, as detailed in Data Transfer between Host and Device, since these have much lower bandwidth than data transfers between global memory and the device.
That also means minimizing data transfers between global memory and the device by maximizing use of on-chip memory: shared memory and caches (i.e., L1 cache and L2 cache available on devices of compute capability 2.x and higher, texture cache and constant cache available on all devices).
Shared memory is equivalent to a user-managed cache: The application explicitly allocates and accesses it. As illustrated in CUDA Runtime, a typical programming pattern is to stage data coming from device memory into shared memory; in other words, to have each thread of a block:
Load data from device memory to shared memory,
Synchronize with all the other threads of the block so that each thread can safely read shared memory locations that were populated by different threads,
Process the data in shared memory,
Synchronize again if necessary to make sure that shared memory has been updated with the results,
Write the results back to device memory.
For some applications (for example, for which global memory access patterns are data-dependent), a traditional hardware-managed cache is more appropriate to exploit data locality. As mentioned in Compute Capability 7.x, Compute Capability 8.x and Compute Capability 9.0, for devices of compute capability 7.x, 8.x and 9.0, the same on-chip memory is used for both L1 and shared memory, and how much of it is dedicated to L1 versus shared memory is configurable for each kernel call.
The throughput of memory accesses by a kernel can vary by an order of magnitude depending on access pattern for each type of memory. The next step in maximizing memory throughput is therefore to organize memory accesses as optimally as possible based on the optimal memory access patterns described in Device Memory Accesses. This optimization is especially important for global memory accesses as global memory bandwidth is low compared to available on-chip bandwidths and arithmetic instruction throughput, so non-optimal global memory accesses generally have a high impact on performance.
5.3.1. Data Transfer between Host and Device
Applications should strive to minimize data transfer between the host and the device. One way to accomplish this is to move more code from the host to the device, even if that means running kernels that do not expose enough parallelism to execute on the device with full efficiency. Intermediate data structures may be created in device memory, operated on by the device, and destroyed without ever being mapped by the host or copied to host memory.
Also, because of the overhead associated with each transfer, batching many small transfers into a single large transfer always performs better than making each transfer separately.
On systems with a front-side bus, higher performance for data transfers between host and device is achieved by using page-locked host memory as described in Page-Locked Host Memory.
In addition, when using mapped page-locked memory (Mapped Memory), there is no need to allocate any device memory and explicitly copy data between device and host memory. Data transfers are implicitly performed each time the kernel accesses the mapped memory. For maximum performance, these memory accesses must be coalesced as with accesses to global memory (see Device Memory Accesses). Assuming that they are and that the mapped memory is read or written only once, using mapped page-locked memory instead of explicit copies between device and host memory can be a win for performance.
On integrated systems where device memory and host memory are physically the same, any copy between host and device memory is superfluous and mapped page-locked memory should be used instead. Applications may query a device is integrated by checking that the integrated device property (see Device Enumeration) is equal to 1.
5.3.2. Device Memory Accesses
An instruction that accesses addressable memory (i.e., global, local, shared, constant, or texture memory) might need to be re-issued multiple times depending on the distribution of the memory addresses across the threads within the warp. How the distribution affects the instruction throughput this way is specific to each type of memory and described in the following sections. For example, for global memory, as a general rule, the more scattered the addresses are, the more reduced the throughput is.
Global Memory
Global memory resides in device memory and device memory is accessed via 32-, 64-, or 128-byte memory transactions. These memory transactions must be naturally aligned: Only the 32-, 64-, or 128-byte segments of device memory that are aligned to their size (i.e., whose first address is a multiple of their size) can be read or written by memory transactions.
When a warp executes an instruction that accesses global memory, it coalesces the memory accesses of the threads within the warp into one or more of these memory transactions depending on the size of the word accessed by each thread and the distribution of the memory addresses across the threads. In general, the more transactions are necessary, the more unused words are transferred in addition to the words accessed by the threads, reducing the instruction throughput accordingly. For example, if a 32-byte memory transaction is generated for each thread’s 4-byte access, throughput is divided by 8.
How many transactions are necessary and how much throughput is ultimately affected varies with the compute capability of the device. Compute Capability 5.x, Compute Capability 6.x, Compute Capability 7.x, Compute Capability 8.x and Compute Capability 9.0 give more details on how global memory accesses are handled for various compute capabilities.
To maximize global memory throughput, it is therefore important to maximize coalescing by:
Following the most optimal access patterns based on Compute Capability 5.x, Compute Capability 6.x, Compute Capability 7.x, Compute Capability 8.x and Compute Capability 9.0
Using data types that meet the size and alignment requirement detailed in the section Size and Alignment Requirement below,
Padding data in some cases, for example, when accessing a two-dimensional array as described in the section Two-Dimensional Arrays below.
Size and Alignment Requirement
Global memory instructions support reading or writing words of size equal to 1, 2, 4, 8, or 16 bytes. Any access (via a variable or a pointer) to data residing in global memory compiles to a single global memory instruction if and only if the size of the data type is 1, 2, 4, 8, or 16 bytes and the data is naturally aligned (i.e., its address is a multiple of that size).
If this size and alignment requirement is not fulfilled, the access compiles to multiple instructions with interleaved access patterns that prevent these instructions from fully coalescing. It is therefore recommended to use types that meet this requirement for data that resides in global memory.
The alignment requirement is automatically fulfilled for the Built-in Vector Types.
For structures, the size and alignment requirements can be enforced by the compiler using the alignment specifiers__align__(8) or __align__(16), such as
struct __align__(8) {
float x;
float y;
};
or
struct __align__(16) {
float x;
float y;
float z;
};
Any address of a variable residing in global memory or returned by one of the memory allocation routines from the driver or runtime API is always aligned to at least 256 bytes.
Reading non-naturally aligned 8-byte or 16-byte words produces incorrect results (off by a few words), so special care must be taken to maintain alignment of the starting address of any value or array of values of these types. A typical case where this might be easily overlooked is when using some custom global memory allocation scheme, whereby the allocations of multiple arrays (with multiple calls to cudaMalloc() or cuMemAlloc()) is replaced by the allocation of a single large block of memory partitioned into multiple arrays, in which case the starting address of each array is offset from the block’s starting address.
Two-Dimensional Arrays
A common global memory access pattern is when each thread of index (tx,ty) uses the following address to access one element of a 2D array of width width, located at address BaseAddress of type type* (where type meets the requirement described in Maximize Utilization):
BaseAddress + width * ty + tx
For these accesses to be fully coalesced, both the width of the thread block and the width of the array must be a multiple of the warp size.
In particular, this means that an array whose width is not a multiple of this size will be accessed much more efficiently if it is actually allocated with a width rounded up to the closest multiple of this size and its rows padded accordingly. The cudaMallocPitch() and cuMemAllocPitch() functions and associated memory copy functions described in the reference manual enable programmers to write non-hardware-dependent code to allocate arrays that conform to these constraints.
Local Memory
Local memory accesses only occur for some automatic variables as mentioned in Variable Memory Space Specifiers. Automatic variables that the compiler is likely to place in local memory are:
Arrays for which it cannot determine that they are indexed with constant quantities,
Large structures or arrays that would consume too much register space,
Any variable if the kernel uses more registers than available (this is also known as register spilling).
Inspection of the PTX assembly code (obtained by compiling with the -ptx or-keep option) will tell if a variable has been placed in local memory during the first compilation phases as it will be declared using the .local mnemonic and accessed using the ld.local and st.local mnemonics. Even if it has not, subsequent compilation phases might still decide otherwise though if they find it consumes too much register space for the targeted architecture: Inspection of the cubin object using cuobjdump will tell if this is the case. Also, the compiler reports total local memory usage per kernel (lmem) when compiling with the --ptxas-options=-v option. Note that some mathematical functions have implementation paths that might access local memory.
The local memory space resides in device memory, so local memory accesses have the same high latency and low bandwidth as global memory accesses and are subject to the same requirements for memory coalescing as described in Device Memory Accesses. Local memory is however organized such that consecutive 32-bit words are accessed by consecutive thread IDs. Accesses are therefore fully coalesced as long as all threads in a warp access the same relative address (for example, same index in an array variable, same member in a structure variable).
On devices of compute capability 5.x onwards, local memory accesses are always cached in L2 in the same way as global memory accesses (see Compute Capability 5.x and Compute Capability 6.x).
Shared Memory
Because it is on-chip, shared memory has much higher bandwidth and much lower latency than local or global memory.
To achieve high bandwidth, shared memory is divided into equally-sized memory modules, called banks, which can be accessed simultaneously. Any memory read or write request made of n addresses that fall in n distinct memory banks can therefore be serviced simultaneously, yielding an overall bandwidth that is n times as high as the bandwidth of a single module.
However, if two addresses of a memory request fall in the same memory bank, there is a bank conflict and the access has to be serialized. The hardware splits a memory request with bank conflicts into as many separate conflict-free requests as necessary, decreasing throughput by a factor equal to the number of separate memory requests. If the number of separate memory requests is n, the initial memory request is said to cause n-way bank conflicts.
To get maximum performance, it is therefore important to understand how memory addresses map to memory banks in order to schedule the memory requests so as to minimize bank conflicts. This is described in Compute Capability 5.x, Compute Capability 6.x, Compute Capability 7.x, Compute Capability 8.x, and Compute Capability 9.0 for devices of compute capability 5.x, 6.x, 7.x, 8.x, and 9.0 respectively.
Constant Memory
The constant memory space resides in device memory and is cached in the constant cache.
A request is then split into as many separate requests as there are different memory addresses in the initial request, decreasing throughput by a factor equal to the number of separate requests.
The resulting requests are then serviced at the throughput of the constant cache in case of a cache hit, or at the throughput of device memory otherwise.
Texture and Surface Memory
The texture and surface memory spaces reside in device memory and are cached in texture cache, so a texture fetch or surface read costs one memory read from device memory only on a cache miss, otherwise it just costs one read from texture cache. The texture cache is optimized for 2D spatial locality, so threads of the same warp that read texture or surface addresses that are close together in 2D will achieve best performance. Also, it is designed for streaming fetches with a constant latency; a cache hit reduces DRAM bandwidth demand but not fetch latency.
Reading device memory through texture or surface fetching present some benefits that can make it an advantageous alternative to reading device memory from global or constant memory:
If the memory reads do not follow the access patterns that global or constant memory reads must follow to get good performance, higher bandwidth can be achieved providing that there is locality in the texture fetches or surface reads;
Addressing calculations are performed outside the kernel by dedicated units;
Packed data may be broadcast to separate variables in a single operation;
8-bit and 16-bit integer input data may be optionally converted to 32 bit floating-point values in the range [0.0, 1.0] or [-1.0, 1.0] (see Texture Memory).
5.4. Maximize Instruction Throughput
To maximize instruction throughput the application should:
Minimize the use of arithmetic instructions with low throughput; this includes trading precision for speed when it does not affect the end result, such as using intrinsic instead of regular functions (intrinsic functions are listed in Intrinsic Functions), single-precision instead of double-precision, or flushing denormalized numbers to zero;
Minimize divergent warps caused by control flow instructions as detailed in Control Flow Instructions
Reduce the number of instructions, for example, by optimizing out synchronization points whenever possible as described in Synchronization Instruction or by using restricted pointers as described in __restrict__.
In this section, throughputs are given in number of operations per clock cycle per multiprocessor. For a warp size of 32, one instruction corresponds to 32 operations, so if N is the number of operations per clock cycle, the instruction throughput is N/32 instructions per clock cycle.
All throughputs are for one multiprocessor. They must be multiplied by the number of multiprocessors in the device to get throughput for the whole device.
5.4.1. Arithmetic Instructions
The following table gives the throughputs of the arithmetic instructions that are natively supported in hardware for devices of various compute capabilities.
Compute Capability |
5.0, 5.2 |
5.3 |
6.0 |
6.1 |
6.2 |
7.x |
8.0 |
8.6 |
8.9 |
9.0 |
|---|---|---|---|---|---|---|---|---|---|---|
16-bit floating-point add, multiply, multiply-add |
N/A |
256 |
128 |
2 |
256 |
128 |
2563 |
128 |
256 |
|
32-bit floating-point add, multiply, multiply-add |
128 |
64 |
128 |
64 |
128 |
|||||
64-bit floating-point add, multiply, multiply-add |
4 |
32 |
4 |
325 |
32 |
2 |
64 |
|||
32-bit floating-point reciprocal, reciprocal square root, base-2 logarithm ( |
32 |
16 |
32 |
16 |
||||||
32-bit integer add, extended-precision add, subtract, extended-precision subtract |
128 |
64 |
128 |
64 |
||||||
32-bit integer multiply, multiply-add, extended-precision multiply-add |
Multiple instruct. |
646 |
||||||||
24-bit integer multiply ( |
Multiple instruct. |
|||||||||
32-bit integer shift |
64 |
32 |
64 |
|||||||
compare, minimum, maximum |
64 |
32 |
64 |
|||||||
32-bit integer bit reverse |
64 |
32 |
64 |
16 |
||||||
Bit field extract/insert |
64 |
32 |
64 |
Multiple Instruct. |
64 |
|||||
32-bit bitwise AND, OR, XOR |
128 |
64 |
128 |
64 |
||||||
count of leading zeros, most significant non-sign bit |
32 |
16 |
32 |
16 |
||||||
population count |
32 |
16 |
32 |
16 |
||||||
warp shuffle |
32 |
328 |
32 |
|||||||
warp reduce |
Multiple instruct. |
16 |
||||||||
warp vote |
64 |
|||||||||
sum of absolute difference |
64 |
32 |
64 |
|||||||
SIMD video instructions |
Multiple instruct. |
|||||||||
SIMD video instructions |
Multiple instruct. |
64 |
||||||||
All other SIMD video instructions |
Multiple instruct. |
|||||||||
Type conversions from 8-bit and 16-bit integer to 32-bit integer types |
32 |
16 |
32 |
64 |
||||||
Type conversions from and to 64-bit types |
4 |
16 |
4 |
1610 |
16 |
2 |
2 |
16 |
||
All other type conversions |
32 |
16 |
32 |
16 |
||||||
16-bit DPX |
Multiple instruct. |
128 |
||||||||
32-bit DPX |
Multiple instruct. |
64 |
||||||||
Other instructions and functions are implemented on top of the native instructions. The implementation may be different for devices of different compute capabilities, and the number of native instructions after compilation may fluctuate with every compiler version. For complicated functions, there can be multiple code paths depending on input. cuobjdump can be used to inspect a particular implementation in a cubin object.
The implementation of some functions are readily available on the CUDA header files (math_functions.h, device_functions.h, …).
In general, code compiled with -ftz=true (denormalized numbers are flushed to zero) tends to have higher performance than code compiled with -ftz=false. Similarly, code compiled with -prec-div=false (less precise division) tends to have higher performance code than code compiled with -prec-div=true, and code compiled with -prec-sqrt=false (less precise square root) tends to have higher performance than code compiled with -prec-sqrt=true. The nvcc user manual describes these compilation flags in more details.
Single-Precision Floating-Point Division
__fdividef(x, y) (see Intrinsic Functions) provides faster single-precision floating-point division than the division operator.
Single-Precision Floating-Point Reciprocal Square Root
To preserve IEEE-754 semantics the compiler can optimize 1.0/sqrtf() into rsqrtf() only when both reciprocal and square root are approximate, (i.e., with -prec-div=false and -prec-sqrt=false). It is therefore recommended to invoke rsqrtf() directly where desired.
Single-Precision Floating-Point Square Root
Single-precision floating-point square root is implemented as a reciprocal square root followed by a reciprocal instead of a reciprocal square root followed by a multiplication so that it gives correct results for 0 and infinity.
Sine and Cosine
sinf(x), cosf(x), tanf(x), sincosf(x), and corresponding double-precision instructions are much more expensive and even more so if the argument x is large in magnitude.
More precisely, the argument reduction code (see Mathematical Functions for implementation) comprises two code paths referred to as the fast path and the slow path, respectively.
The fast path is used for arguments sufficiently small in magnitude and essentially consists of a few multiply-add operations. The slow path is used for arguments large in magnitude and consists of lengthy computations required to achieve correct results over the entire argument range.
At present, the argument reduction code for the trigonometric functions selects the fast path for arguments whose magnitude is less than 105615.0f for the single-precision functions, and less than 2147483648.0 for the double-precision functions.
As the slow path requires more registers than the fast path, an attempt has been made to reduce register pressure in the slow path by storing some intermediate variables in local memory, which may affect performance because of local memory high latency and bandwidth (see Device Memory Accesses). At present, 28 bytes of local memory are used by single-precision functions, and 44 bytes are used by double-precision functions. However, the exact amount is subject to change.
Due to the lengthy computations and use of local memory in the slow path, the throughput of these trigonometric functions is lower by one order of magnitude when the slow path reduction is required as opposed to the fast path reduction.
Integer Arithmetic
Integer division and modulo operation are costly as they compile to up to 20 instructions. They can be replaced with bitwise operations in some cases: If n is a power of 2, (i/n) is equivalent to (i>>log2(n)) and (i%n) is equivalent to (i&(n-1)); the compiler will perform these conversions if n is literal.
__brev and __popc map to a single instruction and __brevll and __popcll to a few instructions.
__[u]mul24 are legacy intrinsic functions that no longer have any reason to be used.
Half Precision Arithmetic
In order to achieve good performance for 16-bit precision floating-point add, multiply or multiply-add, it is recommended that the half2 datatype is used for half precision and __nv_bfloat162 be used for __nv_bfloat16 precision. Vector intrinsics (for example, __hadd2, __hsub2, __hmul2, __hfma2) can then be used to do two operations in a single instruction. Using half2 or __nv_bfloat162 in place of two calls using half or __nv_bfloat16 may also help performance of other intrinsics, such as warp shuffles.
The intrinsic __halves2half2 is provided to convert two half precision values to the half2 datatype.
The intrinsic __halves2bfloat162 is provided to convert two __nv_bfloat precision values to the __nv_bfloat162 datatype.
Type Conversion
Sometimes, the compiler must insert conversion instructions, introducing additional execution cycles. This is the case for:
Functions operating on variables of type
charorshortwhose operands generally need to be converted toint,Double-precision floating-point constants (i.e., those constants defined without any type suffix) used as input to single-precision floating-point computations (as mandated by C/C++ standards).
This last case can be avoided by using single-precision floating-point constants, defined with an f suffix such as 3.141592653589793f, 1.0f, 0.5f.
5.4.2. Control Flow Instructions
Any flow control instruction (if, switch, do, for, while) can significantly impact the effective instruction throughput by causing threads of the same warp to diverge (i.e., to follow different execution paths). If this happens, the different executions paths have to be serialized, increasing the total number of instructions executed for this warp.
To obtain best performance in cases where the control flow depends on the thread ID, the controlling condition should be written so as to minimize the number of divergent warps. This is possible because the distribution of the warps across the block is deterministic as mentioned in SIMT Architecture. A trivial example is when the controlling condition only depends on (threadIdx / warpSize) where warpSize is the warp size. In this case, no warp diverges since the controlling condition is perfectly aligned with the warps.
Sometimes, the compiler may unroll loops or it may optimize out short if or switch blocks by using branch predication instead, as detailed below. In these cases, no warp can ever diverge. The programmer can also control loop unrolling using the #pragma unroll directive (see #pragma unroll).
When using branch predication none of the instructions whose execution depends on the controlling condition gets skipped. Instead, each of them is associated with a per-thread condition code or predicate that is set to true or false based on the controlling condition and although each of these instructions gets scheduled for execution, only the instructions with a true predicate are actually executed. Instructions with a false predicate do not write results, and also do not evaluate addresses or read operands.
5.4.3. Synchronization Instruction
Throughput for __syncthreads() is 32 operations per clock cycle for devices of compute capability 6.0, 16 operations per clock cycle for devices of compute capability 7.x as well as 8.x and 64 operations per clock cycle for devices of compute capability 5.x, 6.1 and 6.2.
Note that __syncthreads() can impact performance by forcing the multiprocessor to idle as detailed in Device Memory Accesses.
5.5. Minimize Memory Thrashing
Applications that constantly allocate and free memory too often may find that the allocation calls tend to get slower over time up to a limit. This is typically expected due to the nature of releasing memory back to the operating system for its own use. For best performance in this regard, we recommend the following:
Try to size your allocation to the problem at hand. Don’t try to allocate all available memory with
cudaMalloc/cudaMallocHost/cuMemCreate, as this forces memory to be resident immediately and prevents other applications from being able to use that memory. This can put more pressure on operating system schedulers, or just prevent other applications using the same GPU from running entirely.Try to allocate memory in appropriately sized allocations early in the application and allocations only when the application does not have any use for it. Reduce the number of
cudaMalloc+cudaFreecalls in the application, especially in performance-critical regions.If an application cannot allocate enough device memory, consider falling back on other memory types such as
cudaMallocHostorcudaMallocManaged, which may not be as performant, but will enable the application to make progress.For platforms that support the feature,
cudaMallocManagedallows for oversubscription, and with the correctcudaMemAdvisepolicies enabled, will allow the application to retain most if not all the performance ofcudaMalloc.cudaMallocManagedalso won’t force an allocation to be resident until it is needed or prefetched, reducing the overall pressure on the operating system schedulers and better enabling multi-tenet use cases.
6. CUDA-Enabled GPUs
https://developer.nvidia.com/cuda-gpus lists all CUDA-enabled devices with their compute capability.
The compute capability, number of multiprocessors, clock frequency, total amount of device memory, and other properties can be queried using the runtime (see reference manual).
7. C++ Language Extensions
7.1. Function Execution Space Specifiers
Function execution space specifiers denote whether a function executes on the host or on the device and whether it is callable from the host or from the device.
7.1.1. __global__
The __global__ execution space specifier declares a function as being a kernel. Such a function is:
Executed on the device,
Callable from the host,
Callable from the device for devices of compute capability 5.0 or higher (see CUDA Dynamic Parallelism for more details).
A __global__ function must have void return type, and cannot be a member of a class.
Any call to a __global__ function must specify its execution configuration as described in Execution Configuration.
A call to a __global__ function is asynchronous, meaning it returns before the device has completed its execution.
7.1.2. __device__
The __device__ execution space specifier declares a function that is:
Executed on the device,
Callable from the device only.
The __global__ and __device__ execution space specifiers cannot be used together.
7.1.3. __host__
The __host__ execution space specifier declares a function that is:
Executed on the host,
Callable from the host only.
It is equivalent to declare a function with only the __host__ execution space specifier or to declare it without any of the __host__, __device__, or __global__ execution space specifier; in either case the function is compiled for the host only.
The __global__ and __host__ execution space specifiers cannot be used together.
The __device__ and __host__ execution space specifiers can be used together however, in which case the function is compiled for both the host and the device. The __CUDA_ARCH__ macro introduced in Application Compatibility can be used to differentiate code paths between host and device:
__host__ __device__ func()
{
#if __CUDA_ARCH__ >= 800
// Device code path for compute capability 8.x
#elif __CUDA_ARCH__ >= 700
// Device code path for compute capability 7.x
#elif __CUDA_ARCH__ >= 600
// Device code path for compute capability 6.x
#elif __CUDA_ARCH__ >= 500
// Device code path for compute capability 5.x
#elif !defined(__CUDA_ARCH__)
// Host code path
#endif
}
7.1.4. Undefined behavior
A ‘cross-execution space’ call has undefined behavior when:
__CUDA_ARCH__is defined, a call from within a__global__,__device__or__host__ __device__function to a__host__function.__CUDA_ARCH__is undefined, a call from within a__host__function to a__device__function. 9
7.1.5. __noinline__ and __forceinline__
The compiler inlines any __device__ function when deemed appropriate.
The __noinline__ function qualifier can be used as a hint for the compiler not to inline the function if possible.
The __forceinline__ function qualifier can be used to force the compiler to inline the function.
The __noinline__ and __forceinline__ function qualifiers cannot be used together, and neither function qualifier can be applied to an inline function.
7.1.6. __inline_hint__
The __inline_hint__ qualifier enables more aggressive inlining in the compiler. Unlike __forceinline__, it does not imply that the function is inline. It can be used to improve inlining across modules when using LTO.
Neither the __noinline__ nor the __forceinline__ function qualifier can be used with the __inline_hint__ function qualifier.
7.2. Variable Memory Space Specifiers
Variable memory space specifiers denote the memory location on the device of a variable.
An automatic variable declared in device code without any of the __device__, __shared__ and __constant__ memory space specifiers described in this section generally resides in a register. However in some cases the compiler might choose to place it in local memory, which can have adverse performance consequences as detailed in Device Memory Accesses.
7.2.1. __device__
The __device__ memory space specifier declares a variable that resides on the device.
At most one of the other memory space specifiers defined in the next three sections may be used together with __device__ to further denote which memory space the variable belongs to. If none of them is present, the variable:
Resides in global memory space,
Has the lifetime of the CUDA context in which it is created,
Has a distinct object per device,
Is accessible from all the threads within the grid and from the host through the runtime library
(cudaGetSymbolAddress()/cudaGetSymbolSize()/cudaMemcpyToSymbol()/cudaMemcpyFromSymbol()).
7.2.2. __constant__
The __constant__ memory space specifier, optionally used together with __device__, declares a variable that:
Resides in constant memory space,
Has the lifetime of the CUDA context in which it is created,
Has a distinct object per device,
Is accessible from all the threads within the grid and from the host through the runtime library (
cudaGetSymbolAddress()/cudaGetSymbolSize()/cudaMemcpyToSymbol()/cudaMemcpyFromSymbol()).
The behavior of modifying a constant from the host while there is a concurrent grid that access that constant at any point of this grid’s lifetime is undefined.
7.2.4. __grid_constant__
The __grid_constant__ annotation for compute architectures greater or equal to 7.0 annotates a const-qualified __global__ function parameter of non-reference type that:
Has the lifetime of the grid,
Is private to the grid, i.e., the object is not accessible to host threads and threads from other grids, including sub-grids,
Has a distinct object per grid, i.e., all threads in the grid see the same address,
Is read-only, i.e., modifying a
__grid_constant__object or any of its sub-objects is undefined behavior, includingmutablemembers.
Requirements:
Kernel parameters annotated with
__grid_constant__must haveconst-qualified non-reference types.All function declarations must match with respect to any
__grid_constant_parameters.A function template specialization must match the primary template declaration with respect to any
__grid_constant__parameters.A function template instantiation directive must match the primary template declaration with respect to any
__grid_constant__parameters.
If the address of a __global__ function parameter is taken, the compiler will ordinarily make a copy of the kernel parameter in thread local memory and use the address of the copy, to partially support C++ semantics, which allow each thread to modify its own local copy of function parameters. Annotating a __global__ function parameter with __grid_constant__ ensures that the compiler will not create a copy of the kernel parameter in thread local memory, but will instead use the generic address of the parameter itself. Avoiding the local copy may result in improved performance.
__device__ void unknown_function(S const&);
__global__ void kernel(const __grid_constant__ S s) {
s.x += threadIdx.x; // Undefined Behavior: tried to modify read-only memory
// Compiler will _not_ create a per-thread thread local copy of "s":
unknown_function(s);
}
7.2.5. __managed__
The __managed__ memory space specifier, optionally used together with __device__, declares a variable that:
Can be referenced from both device and host code, for example, its address can be taken or it can be read or written directly from a device or host function.
Has the lifetime of an application.
See __managed__ Memory Space Specifier for more details.
7.2.6. __restrict__
nvcc supports restricted pointers via the __restrict__ keyword.
Restricted pointers were introduced in C99 to alleviate the aliasing problem that exists in C-type languages, and which inhibits all kind of optimization from code re-ordering to common sub-expression elimination.
Here is an example subject to the aliasing issue, where use of restricted pointer can help the compiler to reduce the number of instructions:
void foo(const float* a,
const float* b,
float* c)
{
c[0] = a[0] * b[0];
c[1] = a[0] * b[0];
c[2] = a[0] * b[0] * a[1];
c[3] = a[0] * a[1];
c[4] = a[0] * b[0];
c[5] = b[0];
...
}
In C-type languages, the pointers a, b, and c may be aliased, so any write through c could modify elements of a or b. This means that to guarantee functional correctness, the compiler cannot load a[0] and b[0] into registers, multiply them, and store the result to both c[0] and c[1], because the results would differ from the abstract execution model if, say, a[0] is really the same location as c[0]. So the compiler cannot take advantage of the common sub-expression. Likewise, the compiler cannot just reorder the computation of c[4] into the proximity of the computation of c[0] and c[1] because the preceding write to c[3] could change the inputs to the computation of c[4].
By making a, b, and c restricted pointers, the programmer asserts to the compiler that the pointers are in fact not aliased, which in this case means writes through c would never overwrite elements of a or b. This changes the function prototype as follows:
void foo(const float* __restrict__ a,
const float* __restrict__ b,
float* __restrict__ c);
Note that all pointer arguments need to be made restricted for the compiler optimizer to derive any benefit. With the __restrict__ keywords added, the compiler can now reorder and do common sub-expression elimination at will, while retaining functionality identical with the abstract execution model:
void foo(const float* __restrict__ a,
const float* __restrict__ b,
float* __restrict__ c)
{
float t0 = a[0];
float t1 = b[0];
float t2 = t0 * t1;
float t3 = a[1];
c[0] = t2;
c[1] = t2;
c[4] = t2;
c[2] = t2 * t3;
c[3] = t0 * t3;
c[5] = t1;
...
}
The effects here are a reduced number of memory accesses and reduced number of computations. This is balanced by an increase in register pressure due to “cached” loads and common sub-expressions.
Since register pressure is a critical issue in many CUDA codes, use of restricted pointers can have negative performance impact on CUDA code, due to reduced occupancy.
7.3. Built-in Vector Types
7.3.1. char, short, int, long, longlong, float, double
These are vector types derived from the basic integer and floating-point types. They are structures and the 1st, 2nd, 3rd, and 4th components are accessible through the fields x, y, z, and w, respectively. They all come with a constructor function of the form make_<type name>; for example,
int2 make_int2(int x, int y);
which creates a vector of type int2 with value(x, y).
The alignment requirements of the vector types are detailed in the following table.
Type |
Alignment |
|---|---|
char1, uchar1 |
1 |
char2, uchar2 |
2 |
char3, uchar3 |
1 |
char4, uchar4 |
4 |
short1, ushort1 |
2 |
short2, ushort2 |
4 |
short3, ushort3 |
2 |
short4, ushort4 |
8 |
int1, uint1 |
4 |
int2, uint2 |
8 |
int3, uint3 |
4 |
int4, uint4 |
16 |
long1, ulong1 |
4 if sizeof(long) is equal to sizeof(int) 8, otherwise |
long2, ulong2 |
8 if sizeof(long) is equal to sizeof(int), 16, otherwise |
long3, ulong3 |
4 if sizeof(long) is equal to sizeof(int), 8, otherwise |
long4, ulong4 |
16 |
longlong1, ulonglong1 |
8 |
longlong2, ulonglong2 |
16 |
longlong3, ulonglong3 |
8 |
longlong4, ulonglong4 |
16 |
float1 |
4 |
float2 |
8 |
float3 |
4 |
float4 |
16 |
double1 |
8 |
double2 |
16 |
double3 |
8 |
double4 |
16 |
7.3.2. dim3
This type is an integer vector type based on uint3 that is used to specify dimensions. When defining a variable of type dim3, any component left unspecified is initialized to 1.
7.4. Built-in Variables
Built-in variables specify the grid and block dimensions and the block and thread indices. They are only valid within functions that are executed on the device.
7.4.1. gridDim
This variable is of type dim3 (see dim3) and contains the dimensions of the grid.
7.4.2. blockIdx
This variable is of type uint3 (see char, short, int, long, longlong, float, double) and contains the block index within the grid.
7.4.3. blockDim
This variable is of type dim3 (see dim3) and contains the dimensions of the block.
7.4.4. threadIdx
This variable is of type uint3 (see char, short, int, long, longlong, float, double) and contains the thread index within the block.
7.4.5. warpSize
This variable is of type int and contains the warp size in threads (see SIMT Architecture for the definition of a warp).
7.5. Memory Fence Functions
The CUDA programming model assumes a device with a weakly-ordered memory model, that is the order in which a CUDA thread writes data to shared memory, global memory, page-locked host memory, or the memory of a peer device is not necessarily the order in which the data is observed being written by another CUDA or host thread. It is undefined behavior for two threads to read from or write to the same memory location without synchronization.
In the following example, thread 1 executes writeXY(), while thread 2 executes readXY().
__device__ int X = 1, Y = 2;
__device__ void writeXY()
{
X = 10;
Y = 20;
}
__device__ void readXY()
{
int B = Y;
int A = X;
}
The two threads read and write from the same memory locations X and Y simultaneously. Any data-race is undefined behavior, and has no defined semantics. The resulting values for A and B can be anything.
Memory fence functions can be used to enforce a sequentially-consistent ordering on memory accesses. The memory fence functions differ in the scope in which the orderings are enforced but they are independent of the accessed memory space (shared memory, global memory, page-locked host memory, and the memory of a peer device).
void __threadfence_block();
is equivalent to cuda::atomic_thread_fence(cuda::memory_order_seq_cst, cuda::thread_scope_block) and ensures that:
All writes to all memory made by the calling thread before the call to
__threadfence_block()are observed by all threads in the block of the calling thread as occurring before all writes to all memory made by the calling thread after the call to__threadfence_block();All reads from all memory made by the calling thread before the call to
__threadfence_block()are ordered before all reads from all memory made by the calling thread after the call to__threadfence_block().
void __threadfence();
is equivalent to cuda::atomic_thread_fence(cuda::memory_order_seq_cst, cuda::thread_scope_device) and ensures that no writes to all memory made by the calling thread after the call to __threadfence() are observed by any thread in the device as occurring before any write to all memory made by the calling thread before the call to __threadfence().
void __threadfence_system();
is equivalent to cuda::atomic_thread_fence(cuda::memory_order_seq_cst, cuda::thread_scope_system) and ensures that all writes to all memory made by the calling thread before the call to __threadfence_system() are observed by all threads in the device, host threads, and all threads in peer devices as occurring before all writes to all memory made by the calling thread after the call to __threadfence_system().
__threadfence_system() is only supported by devices of compute capability 2.x and higher.
In the previous code sample, we can insert fences in the codes as follows:
__device__ int X = 1, Y = 2;
__device__ void writeXY()
{
X = 10;
__threadfence();
Y = 20;
}
__device__ void readXY()
{
int B = Y;
__threadfence();
int A = X;
}
For this code, the following outcomes can be observed:
Aequal to 1 andBequal to 2,Aequal to 10 andBequal to 2,Aequal to 10 andBequal to 20.
The fourth outcome is not possible, because the first write must be visible before the second write. If thread 1 and 2 belong to the same block, it is enough to use __threadfence_block(). If thread 1 and 2 do not belong to the same block, __threadfence() must be used if they are CUDA threads from the same device and __threadfence_system() must be used if they are CUDA threads from two different devices.
A common use case is when threads consume some data produced by other threads as illustrated by the following code sample of a kernel that computes the sum of an array of N numbers in one call. Each block first sums a subset of the array and stores the result in global memory. When all blocks are done, the last block done reads each of these partial sums from global memory and sums them to obtain the final result. In order to determine which block is finished last, each block atomically increments a counter to signal that it is done with computing and storing its partial sum (see Atomic Functions about atomic functions). The last block is the one that receives the counter value equal to gridDim.x-1. If no fence is placed between storing the partial sum and incrementing the counter, the counter might increment before the partial sum is stored and therefore, might reach gridDim.x-1 and let the last block start reading partial sums before they have been actually updated in memory.
Memory fence functions only affect the ordering of memory operations by a thread; they do not, by themselves, ensure that these memory operations are visible to other threads (like __syncthreads() does for threads within a block; see Synchronization Functions). In the code sample below, the visibility of memory operations on the result variable is ensured by declaring it as volatile (see Volatile Qualifier).
__device__ unsigned int count = 0;
__shared__ bool isLastBlockDone;
__global__ void sum(const float* array, unsigned int N,
volatile float* result)
{
// Each block sums a subset of the input array.
float partialSum = calculatePartialSum(array, N);
if (threadIdx.x == 0) {
// Thread 0 of each block stores the partial sum
// to global memory. The compiler will use
// a store operation that bypasses the L1 cache
// since the "result" variable is declared as
// volatile. This ensures that the threads of
// the last block will read the correct partial
// sums computed by all other blocks.
result[blockIdx.x] = partialSum;
// Thread 0 makes sure that the incrementing
// of the "count" variable is only performed after
// the partial sum has been written to global memory.
__threadfence();
// Thread 0 signals that it is done.
unsigned int value = atomicInc(&count, gridDim.x);
// Thread 0 determines if its block is the last
// block to be done.
isLastBlockDone = (value == (gridDim.x - 1));
}
// Synchronize to make sure that each thread reads
// the correct value of isLastBlockDone.
__syncthreads();
if (isLastBlockDone) {
// The last block sums the partial sums
// stored in result[0 .. gridDim.x-1]
float totalSum = calculateTotalSum(result);
if (threadIdx.x == 0) {
// Thread 0 of last block stores the total sum
// to global memory and resets the count
// variable, so that the next kernel call
// works properly.
result[0] = totalSum;
count = 0;
}
}
}
7.6. Synchronization Functions
void __syncthreads();
waits until all threads in the thread block have reached this point and all global and shared memory accesses made by these threads prior to __syncthreads() are visible to all threads in the block.
__syncthreads() is used to coordinate communication between the threads of the same block. When some threads within a block access the same addresses in shared or global memory, there are potential read-after-write, write-after-read, or write-after-write hazards for some of these memory accesses. These data hazards can be avoided by synchronizing threads in-between these accesses.
__syncthreads() is allowed in conditional code but only if the conditional evaluates identically across the entire thread block, otherwise the code execution is likely to hang or produce unintended side effects.
Devices of compute capability 2.x and higher support three variations of __syncthreads() described below.
int __syncthreads_count(int predicate);
is identical to __syncthreads() with the additional feature that it evaluates predicate for all threads of the block and returns the number of threads for which predicate evaluates to non-zero.
int __syncthreads_and(int predicate);
is identical to __syncthreads() with the additional feature that it evaluates predicate for all threads of the block and returns non-zero if and only if predicate evaluates to non-zero for all of them.
int __syncthreads_or(int predicate);
is identical to __syncthreads() with the additional feature that it evaluates predicate for all threads of the block and returns non-zero if and only if predicate evaluates to non-zero for any of them.
void __syncwarp(unsigned mask=0xffffffff);
will cause the executing thread to wait until all warp lanes named in mask have executed a __syncwarp() (with the same mask) before resuming execution. Each calling thread must have its own bit set in the mask and all non-exited threads named in mask must execute a corresponding __syncwarp() with the same mask, or the result is undefined.
Executing __syncwarp() guarantees memory ordering among threads participating in the barrier. Thus, threads within a warp that wish to communicate via memory can store to memory, execute __syncwarp(), and then safely read values stored by other threads in the warp.
Note
For .target sm_6x or below, all threads in mask must execute the same __syncwarp() in convergence, and the union of all values in mask must be equal to the active mask. Otherwise, the behavior is undefined.
7.7. Mathematical Functions
The reference manual lists all C/C++ standard library mathematical functions that are supported in device code and all intrinsic functions that are only supported in device code.
Mathematical Functions provides accuracy information for some of these functions when relevant.
7.8. Texture Functions
Texture objects are described in Texture Object API.
Texture fetching is described in Texture Fetching.
7.8.1. Texture Object API
7.8.1.1. tex1Dfetch()
template<class T>
T tex1Dfetch(cudaTextureObject_t texObj, int x);
fetches from the region of linear memory specified by the one-dimensional texture object texObj using integer texture coordinate x. tex1Dfetch() only works with non-normalized coordinates, so only the border and clamp addressing modes are supported. It does not perform any texture filtering. For integer types, it may optionally promote the integer to single-precision floating point.
7.8.1.2. tex1D()
template<class T>
T tex1D(cudaTextureObject_t texObj, float x);
fetches from the CUDA array specified by the one-dimensional texture object texObj using texture coordinate x.
7.8.1.3. tex1DLod()
template<class T>
T tex1DLod(cudaTextureObject_t texObj, float x, float level);
fetches from the CUDA array specified by the one-dimensional texture object texObj using texture coordinate x at the level-of-detail level.
7.8.1.4. tex1DGrad()
template<class T>
T tex1DGrad(cudaTextureObject_t texObj, float x, float dx, float dy);
fetches from the CUDA array specified by the one-dimensional texture object texObj using texture coordinate x. The level-of-detail is derived from the X-gradient dx and Y-gradient dy.
7.8.1.5. tex2D()
template<class T>
T tex2D(cudaTextureObject_t texObj, float x, float y);
fetches from the CUDA array or the region of linear memory specified by the two-dimensional texture object texObj using texture coordinate (x,y).
7.8.1.6. tex2D() for sparse CUDA arrays
template<class T>
T tex2D(cudaTextureObject_t texObj, float x, float y, bool* isResident);
fetches from the CUDA array specified by the two-dimensional texture object texObj using texture coordinate (x,y). Also returns whether the texel is resident in memory via isResident pointer. If not, the values fetched will be zeros.
7.8.1.7. tex2Dgather()
template<class T>
T tex2Dgather(cudaTextureObject_t texObj,
float x, float y, int comp = 0);
fetches from the CUDA array specified by the 2D texture object texObj using texture coordinates x and y and the comp parameter as described in Texture Gather.
7.8.1.8. tex2Dgather() for sparse CUDA arrays
template<class T>
T tex2Dgather(cudaTextureObject_t texObj,
float x, float y, bool* isResident, int comp = 0);
fetches from the CUDA array specified by the 2D texture object texObj using texture coordinates x and y and the comp parameter as described in Texture Gather. Also returns whether the texel is resident in memory via isResident pointer. If not, the values fetched will be zeros.
7.8.1.9. tex2DGrad()
template<class T>
T tex2DGrad(cudaTextureObject_t texObj, float x, float y,
float2 dx, float2 dy);
fetches from the CUDA array specified by the two-dimensional texture object texObj using texture coordinate (x,y). The level-of-detail is derived from the dx and dy gradients.
7.8.1.10. tex2DGrad() for sparse CUDA arrays
template<class T>
T tex2DGrad(cudaTextureObject_t texObj, float x, float y,
float2 dx, float2 dy, bool* isResident);
fetches from the CUDA array specified by the two-dimensional texture object texObj using texture coordinate (x,y). The level-of-detail is derived from the dx and dy gradients. Also returns whether the texel is resident in memory via isResident pointer. If not, the values fetched will be zeros.
7.8.1.11. tex2DLod()
template<class T>
tex2DLod(cudaTextureObject_t texObj, float x, float y, float level);
fetches from the CUDA array or the region of linear memory specified by the two-dimensional texture object texObj using texture coordinate (x,y) at level-of-detail level.
7.8.1.12. tex2DLod() for sparse CUDA arrays
template<class T>
tex2DLod(cudaTextureObject_t texObj, float x, float y, float level, bool* isResident);
fetches from the CUDA array specified by the two-dimensional texture object texObj using texture coordinate (x,y) at level-of-detail level. Also returns whether the texel is resident in memory via isResident pointer. If not, the values fetched will be zeros.
7.8.1.13. tex3D()
template<class T>
T tex3D(cudaTextureObject_t texObj, float x, float y, float z);
fetches from the CUDA array specified by the three-dimensional texture object texObj using texture coordinate (x,y,z).
7.8.1.14. tex3D() for sparse CUDA arrays
template<class T>
T tex3D(cudaTextureObject_t texObj, float x, float y, float z, bool* isResident);
fetches from the CUDA array specified by the three-dimensional texture object texObj using texture coordinate (x,y,z). Also returns whether the texel is resident in memory via isResident pointer. If not, the values fetched will be zeros.
7.8.1.15. tex3DLod()
template<class T>
T tex3DLod(cudaTextureObject_t texObj, float x, float y, float z, float level);
fetches from the CUDA array or the region of linear memory specified by the three-dimensional texture object texObj using texture coordinate (x,y,z) at level-of-detail level.
7.8.1.16. tex3DLod() for sparse CUDA arrays
template<class T>
T tex3DLod(cudaTextureObject_t texObj, float x, float y, float z, float level, bool* isResident);
fetches from the CUDA array or the region of linear memory specified by the three-dimensional texture object texObj using texture coordinate (x,y,z) at level-of-detail level. Also returns whether the texel is resident in memory via isResident pointer. If not, the values fetched will be zeros.
7.8.1.17. tex3DGrad()
template<class T>
T tex3DGrad(cudaTextureObject_t texObj, float x, float y, float z,
float4 dx, float4 dy);
fetches from the CUDA array specified by the three-dimensional texture object texObj using texture coordinate (x,y,z) at a level-of-detail derived from the X and Y gradients dx and dy.
7.8.1.18. tex3DGrad() for sparse CUDA arrays
template<class T>
T tex3DGrad(cudaTextureObject_t texObj, float x, float y, float z,
float4 dx, float4 dy, bool* isResident);
fetches from the CUDA array specified by the three-dimensional texture object texObj using texture coordinate (x,y,z) at a level-of-detail derived from the X and Y gradients dx and dy. Also returns whether the texel is resident in memory via isResident pointer. If not, the values fetched will be zeros.
7.8.1.19. tex1DLayered()
template<class T>
T tex1DLayered(cudaTextureObject_t texObj, float x, int layer);
fetches from the CUDA array specified by the one-dimensional texture object texObj using texture coordinate x and index layer, as described in Layered Textures.
7.8.1.20. tex1DLayeredLod()
template<class T>
T tex1DLayeredLod(cudaTextureObject_t texObj, float x, int layer, float level);
fetches from the CUDA array specified by the one-dimensional Layered Textures at layer layer using texture coordinate x and level-of-detail level.
7.8.1.21. tex1DLayeredGrad()
template<class T>
T tex1DLayeredGrad(cudaTextureObject_t texObj, float x, int layer,
float dx, float dy);
fetches from the CUDA array specified by the one-dimensional layered texture at layer layer using texture coordinate x and a level-of-detail derived from the dx and dy gradients.
7.8.1.22. tex2DLayered()
template<class T>
T tex2DLayered(cudaTextureObject_t texObj,
float x, float y, int layer);
fetches from the CUDA array specified by the two-dimensional texture object texObj using texture coordinate (x,y) and index layer, as described in Layered Textures.
7.8.1.23. tex2DLayered() for Sparse CUDA Arrays
template<class T>
T tex2DLayered(cudaTextureObject_t texObj,
float x, float y, int layer, bool* isResident);
fetches from the CUDA array specified by the two-dimensional texture object texObj using texture coordinate (x,y) and index layer, as described in Layered Textures. Also returns whether the texel is resident in memory via isResident pointer. If not, the values fetched will be zeros.
7.8.1.24. tex2DLayeredLod()
template<class T>
T tex2DLayeredLod(cudaTextureObject_t texObj, float x, float y, int layer,
float level);
fetches from the CUDA array specified by the two-dimensional layered texture at layer layer using texture coordinate (x,y).
7.8.1.25. tex2DLayeredLod() for sparse CUDA arrays
template<class T>
T tex2DLayeredLod(cudaTextureObject_t texObj, float x, float y, int layer,
float level, bool* isResident);
fetches from the CUDA array specified by the two-dimensional layered texture at layer layer using texture coordinate (x,y). Also returns whether the texel is resident in memory via isResident pointer. If not, the values fetched will be zeros.
7.8.1.26. tex2DLayeredGrad()
template<class T>
T tex2DLayeredGrad(cudaTextureObject_t texObj, float x, float y, int layer,
float2 dx, float2 dy);
fetches from the CUDA array specified by the two-dimensional layered texture at layer layer using texture coordinate (x,y) and a level-of-detail derived from the dx and dy gradients.
7.8.1.27. tex2DLayeredGrad() for sparse CUDA arrays
template<class T>
T tex2DLayeredGrad(cudaTextureObject_t texObj, float x, float y, int layer,
float2 dx, float2 dy, bool* isResident);
fetches from the CUDA array specified by the two-dimensional layered texture at layer layer using texture coordinate (x,y) and a level-of-detail derived from the dx and dy gradients. Also returns whether the texel is resident in memory via isResident pointer. If not, the values fetched will be zeros.
7.8.1.28. texCubemap()
template<class T>
T texCubemap(cudaTextureObject_t texObj, float x, float y, float z);
fetches the CUDA array specified by the cubemap texture object texObj using texture coordinate (x,y,z), as described in Cubemap Textures.
7.8.1.29. texCubemapGrad()
template<class T>
T texCubemapGrad(cudaTextureObject_t texObj, float x, float, y, float z,
float4 dx, float4 dy);
fetches from the CUDA array specified by the cubemap texture object texObj using texture coordinate (x,y,z) as described in Cubemap Textures. The level-of-detail used is derived from the dx and dy gradients.
7.8.1.30. texCubemapLod()
template<class T>
T texCubemapLod(cudaTextureObject_t texObj, float x, float, y, float z,
float level);
fetches from the CUDA array specified by the cubemap texture object texObj using texture coordinate (x,y,z) as described in Cubemap Textures. The level-of-detail used is given by level.
7.8.1.31. texCubemapLayered()
template<class T>
T texCubemapLayered(cudaTextureObject_t texObj,
float x, float y, float z, int layer);
fetches from the CUDA array specified by the cubemap layered texture object texObj using texture coordinates (x,y,z), and index layer, as described in Cubemap Layered Textures.
7.8.1.32. texCubemapLayeredGrad()
template<class T>
T texCubemapLayeredGrad(cudaTextureObject_t texObj, float x, float y, float z,
int layer, float4 dx, float4 dy);
fetches from the CUDA array specified by the cubemap layered texture object texObj using texture coordinate (x,y,z) and index layer, as described in Cubemap Layered Textures, at level-of-detail derived from the dx and dy gradients.
7.8.1.33. texCubemapLayeredLod()
template<class T>
T texCubemapLayeredLod(cudaTextureObject_t texObj, float x, float y, float z,
int layer, float level);
fetches from the CUDA array specified by the cubemap layered texture object texObj using texture coordinate (x,y,z) and index layer, as described in Cubemap Layered Textures, at level-of-detail level level.
7.9. Surface Functions
Surface functions are only supported by devices of compute capability 2.0 and higher.
Surface objects are described in described in Surface Object API.
In the sections below, boundaryMode specifies the boundary mode, that is how out-of-range surface coordinates are handled; it is equal to either cudaBoundaryModeClamp, in which case out-of-range coordinates are clamped to the valid range, or cudaBoundaryModeZero, in which case out-of-range reads return zero and out-of-range writes are ignored, or cudaBoundaryModeTrap, in which case out-of-range accesses cause the kernel execution to fail.
7.9.1. Surface Object API
7.9.1.1. surf1Dread()
template<class T>
T surf1Dread(cudaSurfaceObject_t surfObj, int x,
boundaryMode = cudaBoundaryModeTrap);
reads the CUDA array specified by the one-dimensional surface object surfObj using byte coordinate x.
7.9.1.2. surf1Dwrite
template<class T>
void surf1Dwrite(T data,
cudaSurfaceObject_t surfObj,
int x,
boundaryMode = cudaBoundaryModeTrap);
writes value data to the CUDA array specified by the one-dimensional surface object surfObj at byte coordinate x.
7.9.1.3. surf2Dread()
template<class T>
T surf2Dread(cudaSurfaceObject_t surfObj,
int x, int y,
boundaryMode = cudaBoundaryModeTrap);
template<class T>
void surf2Dread(T* data,
cudaSurfaceObject_t surfObj,
int x, int y,
boundaryMode = cudaBoundaryModeTrap);
reads the CUDA array specified by the two-dimensional surface object surfObj using byte coordinates x and y.
7.9.1.4. surf2Dwrite()
template<class T>
void surf2Dwrite(T data,
cudaSurfaceObject_t surfObj,
int x, int y,
boundaryMode = cudaBoundaryModeTrap);
writes value data to the CUDA array specified by the two-dimensional surface object surfObj at byte coordinate x and y.
7.9.1.5. surf3Dread()
template<class T>
T surf3Dread(cudaSurfaceObject_t surfObj,
int x, int y, int z,
boundaryMode = cudaBoundaryModeTrap);
template<class T>
void surf3Dread(T* data,
cudaSurfaceObject_t surfObj,
int x, int y, int z,
boundaryMode = cudaBoundaryModeTrap);
reads the CUDA array specified by the three-dimensional surface object surfObj using byte coordinates x, y, and z.
7.9.1.6. surf3Dwrite()
template<class T>
void surf3Dwrite(T data,
cudaSurfaceObject_t surfObj,
int x, int y, int z,
boundaryMode = cudaBoundaryModeTrap);
writes value data to the CUDA array specified by the three-dimensional object surfObj at byte coordinate x, y, and z.
7.9.1.7. surf1DLayeredread()
template<class T>
T surf1DLayeredread(
cudaSurfaceObject_t surfObj,
int x, int layer,
boundaryMode = cudaBoundaryModeTrap);
template<class T>
void surf1DLayeredread(T data,
cudaSurfaceObject_t surfObj,
int x, int layer,
boundaryMode = cudaBoundaryModeTrap);
reads the CUDA array specified by the one-dimensional layered surface object surfObj using byte coordinate x and index layer.
7.9.1.8. surf1DLayeredwrite()
template<class Type>
void surf1DLayeredwrite(T data,
cudaSurfaceObject_t surfObj,
int x, int layer,
boundaryMode = cudaBoundaryModeTrap);
writes value data to the CUDA array specified by the two-dimensional layered surface object surfObj at byte coordinate x and index layer.
7.9.1.9. surf2DLayeredread()
template<class T>
T surf2DLayeredread(
cudaSurfaceObject_t surfObj,
int x, int y, int layer,
boundaryMode = cudaBoundaryModeTrap);
template<class T>
void surf2DLayeredread(T data,
cudaSurfaceObject_t surfObj,
int x, int y, int layer,
boundaryMode = cudaBoundaryModeTrap);
reads the CUDA array specified by the two-dimensional layered surface object surfObj using byte coordinate x and y, and index layer.
7.9.1.10. surf2DLayeredwrite()
template<class T>
void surf2DLayeredwrite(T data,
cudaSurfaceObject_t surfObj,
int x, int y, int layer,
boundaryMode = cudaBoundaryModeTrap);
writes value data to the CUDA array specified by the one-dimensional layered surface object surfObj at byte coordinate x and y, and index layer.
7.9.1.11. surfCubemapread()
template<class T>
T surfCubemapread(
cudaSurfaceObject_t surfObj,
int x, int y, int face,
boundaryMode = cudaBoundaryModeTrap);
template<class T>
void surfCubemapread(T data,
cudaSurfaceObject_t surfObj,
int x, int y, int face,
boundaryMode = cudaBoundaryModeTrap);
reads the CUDA array specified by the cubemap surface object surfObj using byte coordinate x and y, and face index face.
7.9.1.12. surfCubemapwrite()
template<class T>
void surfCubemapwrite(T data,
cudaSurfaceObject_t surfObj,
int x, int y, int face,
boundaryMode = cudaBoundaryModeTrap);
writes value data to the CUDA array specified by the cubemap object surfObj at byte coordinate x and y, and face index face.
7.9.1.13. surfCubemapLayeredread()
template<class T>
T surfCubemapLayeredread(
cudaSurfaceObject_t surfObj,
int x, int y, int layerFace,
boundaryMode = cudaBoundaryModeTrap);
template<class T>
void surfCubemapLayeredread(T data,
cudaSurfaceObject_t surfObj,
int x, int y, int layerFace,
boundaryMode = cudaBoundaryModeTrap);
reads the CUDA array specified by the cubemap layered surface object surfObj using byte coordinate x and y, and index layerFace.
7.9.1.14. surfCubemapLayeredwrite()
template<class T>
void surfCubemapLayeredwrite(T data,
cudaSurfaceObject_t surfObj,
int x, int y, int layerFace,
boundaryMode = cudaBoundaryModeTrap);
writes value data to the CUDA array specified by the cubemap layered object surfObj at byte coordinate x and y, and index layerFace.
7.10. Read-Only Data Cache Load Function
The read-only data cache load function is only supported by devices of compute capability 5.0 and higher.
T __ldg(const T* address);
returns the data of type T located at address address, where T is char, signed char, short, int, long, long longunsigned char, unsigned short, unsigned int, unsigned long, unsigned long long, char2, char4, short2, short4, int2, int4, longlong2uchar2, uchar4, ushort2, ushort4, uint2, uint4, ulonglong2float, float2, float4, double, or double2. With the cuda_fp16.h header included, T can be __half or __half2. Similarly, with the cuda_bf16.h header included, T can also be __nv_bfloat16 or __nv_bfloat162. The operation is cached in the read-only data cache (see Global Memory).
7.11. Load Functions Using Cache Hints
These load functions are only supported by devices of compute capability 5.0 and higher.
T __ldcg(const T* address);
T __ldca(const T* address);
T __ldcs(const T* address);
T __ldlu(const T* address);
T __ldcv(const T* address);
returns the data of type T located at address address, where T is char, signed char, short, int, long, long longunsigned char, unsigned short, unsigned int, unsigned long, unsigned long long, char2, char4, short2, short4, int2, int4, longlong2uchar2, uchar4, ushort2, ushort4, uint2, uint4, ulonglong2float, float2, float4, double, or double2. With the cuda_fp16.h header included, T can be __half or __half2. Similarly, with the cuda_bf16.h header included, T can also be __nv_bfloat16 or __nv_bfloat162. The operation is using the corresponding cache operator (see PTX ISA)
7.12. Store Functions Using Cache Hints
These store functions are only supported by devices of compute capability 5.0 and higher.
void __stwb(T* address, T value);
void __stcg(T* address, T value);
void __stcs(T* address, T value);
void __stwt(T* address, T value);
stores the value argument of type T to the location at address address, where T is char, signed char, short, int, long, long longunsigned char, unsigned short, unsigned int, unsigned long, unsigned long long, char2, char4, short2, short4, int2, int4, longlong2uchar2, uchar4, ushort2, ushort4, uint2, uint4, ulonglong2float, float2, float4, double, or double2. With the cuda_fp16.h header included, T can be __half or __half2. Similarly, with the cuda_bf16.h header included, T can also be __nv_bfloat16 or __nv_bfloat162. The operation is using the corresponding cache operator (see PTX ISA )
7.13. Time Function
clock_t clock();
long long int clock64();
when executed in device code, returns the value of a per-multiprocessor counter that is incremented every clock cycle. Sampling this counter at the beginning and at the end of a kernel, taking the difference of the two samples, and recording the result per thread provides a measure for each thread of the number of clock cycles taken by the device to completely execute the thread, but not of the number of clock cycles the device actually spent executing thread instructions. The former number is greater than the latter since threads are time sliced.
7.14. Atomic Functions
An atomic function performs a read-modify-write atomic operation on one 32-bit, 64-bit, or 128-bit word residing in global or shared memory. In the case of float2 or float4, the read-modify-write operation is performed on each element of the vector residing in global memory. For example, atomicAdd() reads a word at some address in global or shared memory, adds a number to it, and writes the result back to the same address. Atomic functions can only be used in device functions.
The atomic functions described in this section have ordering cuda::memory_order_relaxed and are only atomic at a particular scope:
Atomic APIs with
_systemsuffix (example:atomicAdd_system) are atomic at scopecuda::thread_scope_systemif they meet particular conditions.Atomic APIs without a suffix (example:
atomicAdd) are atomic at scopecuda::thread_scope_device.Atomic APIs with
_blocksuffix (example:atomicAdd_block) are atomic at scopecuda::thread_scope_block.
In the following example both the CPU and the GPU atomically update an integer value at address addr:
__global__ void mykernel(int *addr) {
atomicAdd_system(addr, 10); // only available on devices with compute capability 6.x
}
void foo() {
int *addr;
cudaMallocManaged(&addr, 4);
*addr = 0;
mykernel<<<...>>>(addr);
__sync_fetch_and_add(addr, 10); // CPU atomic operation
}
Note that any atomic operation can be implemented based on atomicCAS() (Compare And Swap). For example, atomicAdd() for double-precision floating-point numbers is not available on devices with compute capability lower than 6.0 but it can be implemented as follows:
#if __CUDA_ARCH__ < 600
__device__ double atomicAdd(double* address, double val)
{
unsigned long long int* address_as_ull =
(unsigned long long int*)address;
unsigned long long int old = *address_as_ull, assumed;
do {
assumed = old;
old = atomicCAS(address_as_ull, assumed,
__double_as_longlong(val +
__longlong_as_double(assumed)));
// Note: uses integer comparison to avoid hang in case of NaN (since NaN != NaN)
} while (assumed != old);
return __longlong_as_double(old);
}
#endif
There are system-wide and block-wide variants of the following device-wide atomic APIs, with the following exceptions:
Devices with compute capability less than 6.0 only support device-wide atomic operations,
Tegra devices with compute capability less than 7.2 do not support system-wide atomic operations.
7.14.1. Arithmetic Functions
7.14.1.1. atomicAdd()
int atomicAdd(int* address, int val);
unsigned int atomicAdd(unsigned int* address,
unsigned int val);
unsigned long long int atomicAdd(unsigned long long int* address,
unsigned long long int val);
float atomicAdd(float* address, float val);
double atomicAdd(double* address, double val);
__half2 atomicAdd(__half2 *address, __half2 val);
__half atomicAdd(__half *address, __half val);
__nv_bfloat162 atomicAdd(__nv_bfloat162 *address, __nv_bfloat162 val);
__nv_bfloat16 atomicAdd(__nv_bfloat16 *address, __nv_bfloat16 val);
float2 atomicAdd(float2* address, float2 val);
float4 atomicAdd(float4* address, float4 val);
reads the 16-bit, 32-bit or 64-bit old located at the address address in global or shared memory, computes (old + val), and stores the result back to memory at the same address. These three operations are performed in one atomic transaction. The function returns old.
The 32-bit floating-point version of atomicAdd() is only supported by devices of compute capability 2.x and higher.
The 64-bit floating-point version of atomicAdd() is only supported by devices of compute capability 6.x and higher.
The 32-bit __half2 floating-point version of atomicAdd() is only supported by devices of compute capability 6.x and higher. The atomicity of the __half2 or __nv_bfloat162 add operation is guaranteed separately for each of the two __half or __nv_bfloat16 elements; the entire __half2 or __nv_bfloat162 is not guaranteed to be atomic as a single 32-bit access.
The float2 and float4 floating-point vector versions of atomicAdd() are only supported by devices of compute capability 9.x and higher. The atomicity of the float2 or float4 add operation is guaranteed separately for each of the two or four float elements; the entire float2 or float4 is not guaranteed to be atomic as a single 64-bit or 128-bit access.
The 16-bit __half floating-point version of atomicAdd() is only supported by devices of compute capability 7.x and higher.
The 16-bit __nv_bfloat16 floating-point version of atomicAdd() is only supported by devices of compute capability 8.x and higher.
The float2 and float4 floating-point vector versions of atomicAdd() are only supported by devices of compute capability 9.x and higher.
The float2 and float4 floating-point vector versions of atomicAdd() are only supported for global memory addresses.
7.14.1.2. atomicSub()
int atomicSub(int* address, int val);
unsigned int atomicSub(unsigned int* address,
unsigned int val);
reads the 32-bit word old located at the address address in global or shared memory, computes (old - val), and stores the result back to memory at the same address. These three operations are performed in one atomic transaction. The function returns old.
7.14.1.3. atomicExch()
int atomicExch(int* address, int val);
unsigned int atomicExch(unsigned int* address,
unsigned int val);
unsigned long long int atomicExch(unsigned long long int* address,
unsigned long long int val);
float atomicExch(float* address, float val);
reads the 32-bit or 64-bit word old located at the address address in global or shared memory and stores val back to memory at the same address. These two operations are performed in one atomic transaction. The function returns old.
template<typename T> T atomicExch(T* address, T val);
reads the 128-bit word old located at the address address in global or shared memory and stores val back to memory at the same address. These two operations are performed in one atomic transaction. The function returns old. The type T must meet the following requirements:
sizeof(T) == 16
alignof(T) >= 16
std::is_trivially_copyable<T>::value == true
// for C++03 and older
std::is_default_constructible<T>::value == true
So, T must be 128-bit and properly aligned, be trivially copyable, and on C++03 or older, it must also be default constructible.
The 128-bit atomicExch() is only supported by devices of compute capability 9.x and higher.
7.14.1.4. atomicMin()
int atomicMin(int* address, int val);
unsigned int atomicMin(unsigned int* address,
unsigned int val);
unsigned long long int atomicMin(unsigned long long int* address,
unsigned long long int val);
long long int atomicMin(long long int* address,
long long int val);
reads the 32-bit or 64-bit word old located at the address address in global or shared memory, computes the minimum of old and val, and stores the result back to memory at the same address. These three operations are performed in one atomic transaction. The function returns old.
The 64-bit version of atomicMin() is only supported by devices of compute capability 5.0 and higher.
7.14.1.5. atomicMax()
int atomicMax(int* address, int val);
unsigned int atomicMax(unsigned int* address,
unsigned int val);
unsigned long long int atomicMax(unsigned long long int* address,
unsigned long long int val);
long long int atomicMax(long long int* address,
long long int val);
reads the 32-bit or 64-bit word old located at the address address in global or shared memory, computes the maximum of old and val, and stores the result back to memory at the same address. These three operations are performed in one atomic transaction. The function returns old.
The 64-bit version of atomicMax() is only supported by devices of compute capability 5.0 and higher.
7.14.1.6. atomicInc()
unsigned int atomicInc(unsigned int* address,
unsigned int val);
reads the 32-bit word old located at the address address in global or shared memory, computes ((old >= val) ? 0 : (old+1)), and stores the result back to memory at the same address. These three operations are performed in one atomic transaction. The function returns old.
7.14.1.7. atomicDec()
unsigned int atomicDec(unsigned int* address,
unsigned int val);
reads the 32-bit word old located at the address address in global or shared memory, computes (((old == 0) || (old > val)) ? val : (old-1) ), and stores the result back to memory at the same address. These three operations are performed in one atomic transaction. The function returns old.
7.14.1.8. atomicCAS()
int atomicCAS(int* address, int compare, int val);
unsigned int atomicCAS(unsigned int* address,
unsigned int compare,
unsigned int val);
unsigned long long int atomicCAS(unsigned long long int* address,
unsigned long long int compare,
unsigned long long int val);
unsigned short int atomicCAS(unsigned short int *address,
unsigned short int compare,
unsigned short int val);
reads the 16-bit, 32-bit or 64-bit word old located at the address address in global or shared memory, computes (old == compare ? val : old), and stores the result back to memory at the same address. These three operations are performed in one atomic transaction. The function returns old (Compare And Swap).
template<typename T> T atomicCAS(T* address, T compare, T val);
reads the 128-bit word old located at the address address in global or shared memory, computes (old == compare ? val : old), and stores the result back to memory at the same address. These three operations are performed in one atomic transaction. The function returns old (Compare And Swap). The type T must meet the following requirements:
sizeof(T) == 16
alignof(T) >= 16
std::is_trivially_copyable<T>::value == true
// for C++03 and older
std::is_default_constructible<T>::value == true
So, T must be 128-bit and properly aligned, be trivially copyable, and on C++03 or older, it must also be default constructible.
The 128-bit atomicCAS() is only supported by devices of compute capability 9.x and higher.
7.14.2. Bitwise Functions
7.14.2.1. atomicAnd()
int atomicAnd(int* address, int val);
unsigned int atomicAnd(unsigned int* address,
unsigned int val);
unsigned long long int atomicAnd(unsigned long long int* address,
unsigned long long int val);
reads the 32-bit or 64-bit word old located at the address address in global or shared memory, computes (old & val), and stores the result back to memory at the same address. These three operations are performed in one atomic transaction. The function returns old.
The 64-bit version of atomicAnd() is only supported by devices of compute capability 5.0 and higher.
7.14.2.2. atomicOr()
int atomicOr(int* address, int val);
unsigned int atomicOr(unsigned int* address,
unsigned int val);
unsigned long long int atomicOr(unsigned long long int* address,
unsigned long long int val);
reads the 32-bit or 64-bit word old located at the address address in global or shared memory, computes (old | val), and stores the result back to memory at the same address. These three operations are performed in one atomic transaction. The function returns old.
The 64-bit version of atomicOr() is only supported by devices of compute capability 5.0 and higher.
7.14.2.3. atomicXor()
int atomicXor(int* address, int val);
unsigned int atomicXor(unsigned int* address,
unsigned int val);
unsigned long long int atomicXor(unsigned long long int* address,
unsigned long long int val);
reads the 32-bit or 64-bit word old located at the address address in global or shared memory, computes (old ^ val), and stores the result back to memory at the same address. These three operations are performed in one atomic transaction. The function returns old.
The 64-bit version of atomicXor() is only supported by devices of compute capability 5.0 and higher.
7.15. Address Space Predicate Functions
The functions described in this section have unspecified behavior if the argument is a null pointer.
7.15.1. __isGlobal()
__device__ unsigned int __isGlobal(const void *ptr);
Returns 1 if ptr contains the generic address of an object in global memory space, otherwise returns 0.
7.15.3. __isConstant()
__device__ unsigned int __isConstant(const void *ptr);
Returns 1 if ptr contains the generic address of an object in constant memory space, otherwise returns 0.
7.15.4. __isGridConstant()
__device__ unsigned int __isGridConstant(const void *ptr);
Returns 1 if ptr contains the generic address of a kernel parameter annotated with __grid_constant__, otherwise returns 0. Only supported for compute architectures greater than or equal to 7.x or later.
7.15.5. __isLocal()
__device__ unsigned int __isLocal(const void *ptr);
Returns 1 if ptr contains the generic address of an object in local memory space, otherwise returns 0.
7.16. Address Space Conversion Functions
7.16.1. __cvta_generic_to_global()
__device__ size_t __cvta_generic_to_global(const void *ptr);
Returns the result of executing the PTXcvta.to.global instruction on the generic address denoted by ptr.
7.16.3. __cvta_generic_to_constant()
__device__ size_t __cvta_generic_to_constant(const void *ptr);
Returns the result of executing the PTXcvta.to.const instruction on the generic address denoted by ptr.
7.16.4. __cvta_generic_to_local()
__device__ size_t __cvta_generic_to_local(const void *ptr);
Returns the result of executing the PTXcvta.to.local instruction on the generic address denoted by ptr.
7.16.5. __cvta_global_to_generic()
__device__ void * __cvta_global_to_generic(size_t rawbits);
Returns the generic pointer obtained by executing the PTXcvta.global instruction on the value provided by rawbits.
7.16.7. __cvta_constant_to_generic()
__device__ void * __cvta_constant_to_generic(size_t rawbits);
Returns the generic pointer obtained by executing the PTXcvta.const instruction on the value provided by rawbits.
7.16.8. __cvta_local_to_generic()
__device__ void * __cvta_local_to_generic(size_t rawbits);
Returns the generic pointer obtained by executing the PTXcvta.local instruction on the value provided by rawbits.
7.17. Alloca Function
7.17.1. Synopsis
__host__ __device__ void * alloca(size_t size);
7.17.2. Description
The alloca() function allocates size bytes of memory in the stack frame of the caller. The returned value is a pointer to allocated memory, the beginning of the memory is 16 bytes aligned when the function is invoked from device code. The allocated memory is automatically freed when the caller to alloca() is returned.
Note
On Windows platform, <malloc.h> must be included before using alloca(). Using alloca() may cause the stack to overflow, user needs to adjust stack size accordingly.
It is supported with compute capability 5.2 or higher.
7.17.3. Example
__device__ void foo(unsigned int num) {
int4 *ptr = (int4 *)alloca(num * sizeof(int4));
// use of ptr
...
}
7.18. Compiler Optimization Hint Functions
The functions described in this section can be used to provide additional information to the compiler optimizer.
7.18.1. __builtin_assume_aligned()
void * __builtin_assume_aligned (const void *exp, size_t align)
Allows the compiler to assume that the argument pointer is aligned to at least align bytes, and returns the argument pointer.
Example:
void *res = __builtin_assume_aligned(ptr, 32); // compiler can assume 'res' is
// at least 32-byte aligned
Three parameter version:
void * __builtin_assume_aligned (const void *exp, size_t align,
<integral type> offset)
Allows the compiler to assume that (char *)exp - offset is aligned to at least align bytes, and returns the argument pointer.
Example:
void *res = __builtin_assume_aligned(ptr, 32, 8); // compiler can assume
// '(char *)res - 8' is
// at least 32-byte aligned.
7.18.2. __builtin_assume()
void __builtin_assume(bool exp)
Allows the compiler to assume that the Boolean argument is true. If the argument is not true at run time, then the behavior is undefined. Note that if the argument has side effects, the behavior is unspecified.
Example:
__device__ int get(int *ptr, int idx) {
__builtin_assume(idx <= 2);
return ptr[idx];
}
7.18.3. __assume()
void __assume(bool exp)
Allows the compiler to assume that the Boolean argument is true. If the argument is not true at run time, then the behavior is undefined. Note that if the argument has side effects, the behavior is unspecified.
Example:
__device__ int get(int *ptr, int idx) {
__assume(idx <= 2);
return ptr[idx];
}
7.18.4. __builtin_expect()
long __builtin_expect (long exp, long c)
Indicates to the compiler that it is expected that exp == c, and returns the value of exp. Typically used to indicate branch prediction information to the compiler.
Example:
// indicate to the compiler that likely "var == 0",
// so the body of the if-block is unlikely to be
// executed at run time.
if (__builtin_expect (var, 0))
doit ();
7.18.5. __builtin_unreachable()
void __builtin_unreachable(void)
Indicates to the compiler that control flow never reaches the point where this function is being called from. The program has undefined behavior if the control flow does actually reach this point at run time.
Example:
// indicates to the compiler that the default case label is never reached.
switch (in) {
case 1: return 4;
case 2: return 10;
default: __builtin_unreachable();
}
7.18.6. Restrictions
__assume() is only supported when using cl.exe host compiler. The other functions are supported on all platforms, subject to the following restrictions:
If the host compiler supports the function, the function can be invoked from anywhere in translation unit.
Otherwise, the function must be invoked from within the body of a
__device__/__global__function, or only when the__CUDA_ARCH__macro is defined12.
7.19. Warp Vote Functions
int __all_sync(unsigned mask, int predicate);
int __any_sync(unsigned mask, int predicate);
unsigned __ballot_sync(unsigned mask, int predicate);
unsigned __activemask();
Deprecation notice: __any, __all, and __ballot have been deprecated in CUDA 9.0 for all devices.
Removal notice: When targeting devices with compute capability 7.x or higher, __any, __all, and __ballot are no longer available and their sync variants should be used instead.
The warp vote functions allow the threads of a given warp to perform a reduction-and-broadcast operation. These functions take as input an integer predicate from each thread in the warp and compare those values with zero. The results of the comparisons are combined (reduced) across the active threads of the warp in one of the following ways, broadcasting a single return value to each participating thread:
-
__all_sync(unsigned mask, predicate): -
Evaluate
predicatefor all non-exited threads inmaskand return non-zero if and only ifpredicateevaluates to non-zero for all of them. -
__any_sync(unsigned mask, predicate): -
Evaluate
predicatefor all non-exited threads inmaskand return non-zero if and only ifpredicateevaluates to non-zero for any of them. -
__ballot_sync(unsigned mask, predicate): -
Evaluate
predicatefor all non-exited threads inmaskand return an integer whose Nth bit is set if and only ifpredicateevaluates to non-zero for the Nth thread of the warp and the Nth thread is active. -
__activemask(): -
Returns a 32-bit integer mask of all currently active threads in the calling warp. The Nth bit is set if the Nth lane in the warp is active when
__activemask()is called. Inactive threads are represented by 0 bits in the returned mask. Threads which have exited the program are always marked as inactive. Note that threads that are convergent at an__activemask()call are not guaranteed to be convergent at subsequent instructions unless those instructions are synchronizing warp-builtin functions.
For __all_sync, __any_sync, and __ballot_sync, a mask must be passed that specifies the threads participating in the call. A bit, representing the thread’s lane ID, must be set for each participating thread to ensure they are properly converged before the intrinsic is executed by the hardware. Each calling thread must have its own bit set in the mask and all non-exited threads named in mask must execute the same intrinsic with the same mask, or the result is undefined.
These intrinsics do not imply a memory barrier. They do not guarantee any memory ordering.
7.20. Warp Match Functions
__match_any_sync and __match_all_sync perform a broadcast-and-compare operation of a variable between threads within a warp.
Supported by devices of compute capability 7.x or higher.
7.20.1. Synopsis
unsigned int __match_any_sync(unsigned mask, T value);
unsigned int __match_all_sync(unsigned mask, T value, int *pred);
T can be int, unsigned int, long, unsigned long, long long, unsigned long long, float or double.
7.20.2. Description
The __match_sync() intrinsics permit a broadcast-and-compare of a value value across threads in a warp after synchronizing threads named in mask.
__match_any_sync-
Returns mask of threads that have same value of
valueinmask __match_all_sync-
Returns
maskif all threads inmaskhave the same value forvalue; otherwise 0 is returned. Predicatepredis set to true if all threads inmaskhave the same value ofvalue; otherwise the predicate is set to false.
The new *_sync match intrinsics take in a mask indicating the threads participating in the call. A bit, representing the thread’s lane id, must be set for each participating thread to ensure they are properly converged before the intrinsic is executed by the hardware. Each calling thread must have its own bit set in the mask and all non-exited threads named in mask must execute the same intrinsic with the same mask, or the result is undefined.
These intrinsics do not imply a memory barrier. They do not guarantee any memory ordering.
7.21. Warp Reduce Functions
The __reduce_sync(unsigned mask, T value) intrinsics perform a reduction operation on the data provided in value after synchronizing threads named in mask. T can be unsigned or signed for {add, min, max} and unsigned only for {and, or, xor} operations.
Supported by devices of compute capability 8.x or higher.
7.21.1. Synopsis
// add/min/max
unsigned __reduce_add_sync(unsigned mask, unsigned value);
unsigned __reduce_min_sync(unsigned mask, unsigned value);
unsigned __reduce_max_sync(unsigned mask, unsigned value);
int __reduce_add_sync(unsigned mask, int value);
int __reduce_min_sync(unsigned mask, int value);
int __reduce_max_sync(unsigned mask, int value);
// and/or/xor
unsigned __reduce_and_sync(unsigned mask, unsigned value);
unsigned __reduce_or_sync(unsigned mask, unsigned value);
unsigned __reduce_xor_sync(unsigned mask, unsigned value);
7.21.2. Description
-
__reduce_add_sync,__reduce_min_sync,__reduce_max_sync -
Returns the result of applying an arithmetic add, min, or max reduction operation on the values provided in
valueby each thread named inmask. -
__reduce_and_sync,__reduce_or_sync,__reduce_xor_sync -
Returns the result of applying a logical AND, OR, or XOR reduction operation on the values provided in
valueby each thread named inmask.
The mask indicates the threads participating in the call. A bit, representing the thread’s lane id, must be set for each participating thread to ensure they are properly converged before the intrinsic is executed by the hardware. Each calling thread must have its own bit set in the mask and all non-exited threads named in mask must execute the same intrinsic with the same mask, or the result is undefined.
These intrinsics do not imply a memory barrier. They do not guarantee any memory ordering.
7.22. Warp Shuffle Functions
__shfl_sync, __shfl_up_sync, __shfl_down_sync, and __shfl_xor_sync exchange a variable between threads within a warp.
Supported by devices of compute capability 5.0 or higher.
Deprecation Notice: __shfl, __shfl_up, __shfl_down, and __shfl_xor have been deprecated in CUDA 9.0 for all devices.
Removal Notice: When targeting devices with compute capability 7.x or higher, __shfl, __shfl_up, __shfl_down, and __shfl_xor are no longer available and their sync variants should be used instead.
7.22.1. Synopsis
T __shfl_sync(unsigned mask, T var, int srcLane, int width=warpSize);
T __shfl_up_sync(unsigned mask, T var, unsigned int delta, int width=warpSize);
T __shfl_down_sync(unsigned mask, T var, unsigned int delta, int width=warpSize);
T __shfl_xor_sync(unsigned mask, T var, int laneMask, int width=warpSize);
T can be int, unsigned int, long, unsigned long, long long, unsigned long long, float or double. With the cuda_fp16.h header included, T can also be __half or __half2. Similarly, with the cuda_bf16.h header included, T can also be __nv_bfloat16 or __nv_bfloat162.
7.22.2. Description
The __shfl_sync() intrinsics permit exchanging of a variable between threads within a warp without use of shared memory. The exchange occurs simultaneously for all active threads within the warp (and named in mask), moving 4 or 8 bytes of data per thread depending on the type.
Threads within a warp are referred to as lanes, and may have an index between 0 and warpSize-1 (inclusive). Four source-lane addressing modes are supported:
__shfl_sync()-
Direct copy from indexed lane
__shfl_up_sync()-
Copy from a lane with lower ID relative to caller
__shfl_down_sync()-
Copy from a lane with higher ID relative to caller
__shfl_xor_sync()-
Copy from a lane based on bitwise XOR of own lane ID
Threads may only read data from another thread which is actively participating in the __shfl_sync() command. If the target thread is inactive, the retrieved value is undefined.
All of the __shfl_sync() intrinsics take an optional width parameter which alters the behavior of the intrinsic. width must have a value which is a power of two in the range [1, warpSize] (i.e., 1, 2, 4, 8, 16 or 32). Results are undefined for other values.
__shfl_sync() returns the value of var held by the thread whose ID is given by srcLane. If width is less than warpSize then each subsection of the warp behaves as a separate entity with a starting logical lane ID of 0. If srcLane is outside the range [0:width-1], the value returned corresponds to the value of var held by the srcLane modulo width (i.e. within the same subsection).
__shfl_up_sync() calculates a source lane ID by subtracting delta from the caller’s lane ID. The value of var held by the resulting lane ID is returned: in effect, var is shifted up the warp by delta lanes. If width is less than warpSize then each subsection of the warp behaves as a separate entity with a starting logical lane ID of 0. The source lane index will not wrap around the value of width, so effectively the lower delta lanes will be unchanged.
__shfl_down_sync() calculates a source lane ID by adding delta to the caller’s lane ID. The value of var held by the resulting lane ID is returned: this has the effect of shifting var down the warp by delta lanes. If width is less than warpSize then each subsection of the warp behaves as a separate entity with a starting logical lane ID of 0. As for __shfl_up_sync(), the ID number of the source lane will not wrap around the value of width and so the upper delta lanes will remain unchanged.
__shfl_xor_sync() calculates a source line ID by performing a bitwise XOR of the caller’s lane ID with laneMask: the value of var held by the resulting lane ID is returned. If width is less than warpSize then each group of width consecutive threads are able to access elements from earlier groups of threads, however if they attempt to access elements from later groups of threads their own value of var will be returned. This mode implements a butterfly addressing pattern such as is used in tree reduction and broadcast.
The new *_sync shfl intrinsics take in a mask indicating the threads participating in the call. A bit, representing the thread’s lane id, must be set for each participating thread to ensure they are properly converged before the intrinsic is executed by the hardware. Each calling thread must have its own bit set in the mask and all non-exited threads named in mask must execute the same intrinsic with the same mask, or the result is undefined.
Threads may only read data from another thread which is actively participating in the __shfl_sync() command. If the target thread is inactive, the retrieved value is undefined.
These intrinsics do not imply a memory barrier. They do not guarantee any memory ordering.
7.22.3. Examples
7.22.3.1. Broadcast of a single value across a warp
#include <stdio.h>
__global__ void bcast(int arg) {
int laneId = threadIdx.x & 0x1f;
int value;
if (laneId == 0) // Note unused variable for
value = arg; // all threads except lane 0
value = __shfl_sync(0xffffffff, value, 0); // Synchronize all threads in warp, and get "value" from lane 0
if (value != arg)
printf("Thread %d failed.\n", threadIdx.x);
}
int main() {
bcast<<< 1, 32 >>>(1234);
cudaDeviceSynchronize();
return 0;
}
7.22.3.2. Inclusive plus-scan across sub-partitions of 8 threads
#include <stdio.h>
__global__ void scan4() {
int laneId = threadIdx.x & 0x1f;
// Seed sample starting value (inverse of lane ID)
int value = 31 - laneId;
// Loop to accumulate scan within my partition.
// Scan requires log2(n) == 3 steps for 8 threads
// It works by an accumulated sum up the warp
// by 1, 2, 4, 8 etc. steps.
for (int i=1; i<=4; i*=2) {
// We do the __shfl_sync unconditionally so that we
// can read even from threads which won't do a
// sum, and then conditionally assign the result.
int n = __shfl_up_sync(0xffffffff, value, i, 8);
if ((laneId & 7) >= i)
value += n;
}
printf("Thread %d final value = %d\n", threadIdx.x, value);
}
int main() {
scan4<<< 1, 32 >>>();
cudaDeviceSynchronize();
return 0;
}
7.22.3.3. Reduction across a warp
#include <stdio.h>
__global__ void warpReduce() {
int laneId = threadIdx.x & 0x1f;
// Seed starting value as inverse lane ID
int value = 31 - laneId;
// Use XOR mode to perform butterfly reduction
for (int i=16; i>=1; i/=2)
value += __shfl_xor_sync(0xffffffff, value, i, 32);
// "value" now contains the sum across all threads
printf("Thread %d final value = %d\n", threadIdx.x, value);
}
int main() {
warpReduce<<< 1, 32 >>>();
cudaDeviceSynchronize();
return 0;
}
7.23. Nanosleep Function
7.23.1. Synopsis
void __nanosleep(unsigned ns);
7.23.2. Description
__nanosleep(ns) suspends the thread for a sleep duration of approximately ns nanoseconds. The maximum sleep duration is approximately 1 millisecond.
It is supported with compute capability 7.0 or higher.
7.23.3. Example
The following code implements a mutex with exponential back-off.
__device__ void mutex_lock(unsigned int *mutex) {
unsigned int ns = 8;
while (atomicCAS(mutex, 0, 1) == 1) {
__nanosleep(ns);
if (ns < 256) {
ns *= 2;
}
}
}
__device__ void mutex_unlock(unsigned int *mutex) {
atomicExch(mutex, 0);
}
7.24. Warp Matrix Functions
C++ warp matrix operations leverage Tensor Cores to accelerate matrix problems of the form D=A*B+C. These operations are supported on mixed-precision floating point data for devices of compute capability 7.0 or higher. This requires co-operation from all threads in a warp. In addition, these operations are allowed in conditional code only if the condition evaluates identically across the entire warp, otherwise the code execution is likely to hang.
7.24.1. Description
All following functions and types are defined in the namespace nvcuda::wmma. Sub-byte operations are considered preview, i.e. the data structures and APIs for them are subject to change and may not be compatible with future releases. This extra functionality is defined in the nvcuda::wmma::experimental namespace.
template<typename Use, int m, int n, int k, typename T, typename Layout=void> class fragment;
void load_matrix_sync(fragment<...> &a, const T* mptr, unsigned ldm);
void load_matrix_sync(fragment<...> &a, const T* mptr, unsigned ldm, layout_t layout);
void store_matrix_sync(T* mptr, const fragment<...> &a, unsigned ldm, layout_t layout);
void fill_fragment(fragment<...> &a, const T& v);
void mma_sync(fragment<...> &d, const fragment<...> &a, const fragment<...> &b, const fragment<...> &c, bool satf=false);
fragment-
An overloaded class containing a section of a matrix distributed across all threads in the warp. The mapping of matrix elements into
fragmentinternal storage is unspecified and subject to change in future architectures.
Only certain combinations of template arguments are allowed. The first template parameter specifies how the fragment will participate in the matrix operation. Acceptable values for Use are:
matrix_awhen the fragment is used as the first multiplicand,A,matrix_bwhen the fragment is used as the second multiplicand,B, or-
accumulatorwhen the fragment is used as the source or destination accumulators (CorD, respectively).The
m,nandksizes describe the shape of the warp-wide matrix tiles participating in the multiply-accumulate operation. The dimension of each tile depends on its role. Formatrix_athe tile takes dimensionm x k; formatrix_bthe dimension isk x n, andaccumulatortiles arem x n.The data type,
T, may bedouble,float,__half,__nv_bfloat16,char, orunsigned charfor multiplicands anddouble,float,int, or__halffor accumulators. As documented in Element Types and Matrix Sizes, limited combinations of accumulator and multiplicand types are supported. The Layout parameter must be specified formatrix_aandmatrix_bfragments.row_majororcol_majorindicate that elements within a matrix row or column are contiguous in memory, respectively. TheLayoutparameter for anaccumulatormatrix should retain the default value ofvoid. A row or column layout is specified only when the accumulator is loaded or stored as described below.
load_matrix_sync-
Waits until all warp lanes have arrived at load_matrix_sync and then loads the matrix fragment a from memory.
mptrmust be a 256-bit aligned pointer pointing to the first element of the matrix in memory.ldmdescribes the stride in elements between consecutive rows (for row major layout) or columns (for column major layout) and must be a multiple of 8 for__halfelement type or multiple of 4 forfloatelement type. (i.e., multiple of 16 bytes in both cases). If the fragment is anaccumulator, thelayoutargument must be specified as eithermem_row_majorormem_col_major. Formatrix_aandmatrix_bfragments, the layout is inferred from the fragment’slayoutparameter. The values ofmptr,ldm,layoutand all template parameters foramust be the same for all threads in the warp. This function must be called by all threads in the warp, or the result is undefined. store_matrix_sync-
Waits until all warp lanes have arrived at store_matrix_sync and then stores the matrix fragment a to memory.
mptrmust be a 256-bit aligned pointer pointing to the first element of the matrix in memory.ldmdescribes the stride in elements between consecutive rows (for row major layout) or columns (for column major layout) and must be a multiple of 8 for__halfelement type or multiple of 4 forfloatelement type. (i.e., multiple of 16 bytes in both cases). The layout of the output matrix must be specified as eithermem_row_majorormem_col_major. The values ofmptr,ldm,layoutand all template parameters for a must be the same for all threads in the warp. fill_fragment-
Fill a matrix fragment with a constant value
v. Because the mapping of matrix elements to each fragment is unspecified, this function is ordinarily called by all threads in the warp with a common value forv. mma_sync-
Waits until all warp lanes have arrived at mma_sync, and then performs the warp-synchronous matrix multiply-accumulate operation
D=A*B+C. The in-place operation,C=A*B+C, is also supported. The value ofsatfand template parameters for each matrix fragment must be the same for all threads in the warp. Also, the template parametersm,nandkmust match between fragmentsA,B,CandD. This function must be called by all threads in the warp, or the result is undefined.
If satf (saturate to finite value) mode is true, the following additional numerical properties apply for the destination accumulator:
If an element result is +Infinity, the corresponding accumulator will contain
+MAX_NORMIf an element result is -Infinity, the corresponding accumulator will contain
-MAX_NORMIf an element result is NaN, the corresponding accumulator will contain
+0
Because the map of matrix elements into each thread’s fragment is unspecified, individual matrix elements must be accessed from memory (shared or global) after calling store_matrix_sync. In the special case where all threads in the warp will apply an element-wise operation uniformly to all fragment elements, direct element access can be implemented using the following fragment class members.
enum fragment<Use, m, n, k, T, Layout>::num_elements;
T fragment<Use, m, n, k, T, Layout>::x[num_elements];
As an example, the following code scales an accumulator matrix tile by half.
wmma::fragment<wmma::accumulator, 16, 16, 16, float> frag;
float alpha = 0.5f; // Same value for all threads in warp
/*...*/
for(int t=0; t<frag.num_elements; t++)
frag.x[t] *= alpha;
7.24.2. Alternate Floating Point
Tensor Cores support alternate types of floating point operations on devices with compute capability 8.0 and higher.
__nv_bfloat16-
This data format is an alternate fp16 format that has the same range as f32 but reduced precision (7 bits). You can use this data format directly with the
__nv_bfloat16type available incuda_bf16.h. Matrix fragments with__nv_bfloat16data types are required to be composed with accumulators offloattype. The shapes and operations supported are the same as with__half. tf32-
This data format is a special floating point format supported by Tensor Cores, with the same range as f32 and reduced precision (>=10 bits). The internal layout of this format is implementation defined. In order to use this floating point format with WMMA operations, the input matrices must be manually converted to tf32 precision.
To facilitate conversion, a new intrinsic
__float_to_tf32is provided. While the input and output arguments to the intrinsic are offloattype, the output will betf32numerically. This new precision is intended to be used with Tensor Cores only, and if mixed with otherfloattype operations, the precision and range of the result will be undefined.Once an input matrix (
matrix_aormatrix_b) is converted to tf32 precision, the combination of afragmentwithprecision::tf32precision, and a data type offloattoload_matrix_syncwill take advantage of this new capability. Both the accumulator fragments must havefloatdata types. The only supported matrix size is 16x16x8 (m-n-k).The elements of the fragment are represented as
float, hence the mapping fromelement_type<T>tostorage_element_type<T>is:precision::tf32 -> float
7.24.3. Double Precision
Tensor Cores support double-precision floating point operations on devices with compute capability 8.0 and higher. To use this new functionality, a fragment with the double type must be used. The mma_sync operation will be performed with the .rn (rounds to nearest even) rounding modifier.
7.24.4. Sub-byte Operations
Sub-byte WMMA operations provide a way to access the low-precision capabilities of Tensor Cores. They are considered a preview feature i.e. the data structures and APIs for them are subject to change and may not be compatible with future releases. This functionality is available via the nvcuda::wmma::experimental namespace:
namespace experimental {
namespace precision {
struct u4; // 4-bit unsigned
struct s4; // 4-bit signed
struct b1; // 1-bit
}
enum bmmaBitOp {
bmmaBitOpXOR = 1, // compute_75 minimum
bmmaBitOpAND = 2 // compute_80 minimum
};
enum bmmaAccumulateOp { bmmaAccumulateOpPOPC = 1 };
}
For 4 bit precision, the APIs available remain the same, but you must specify experimental::precision::u4 or experimental::precision::s4 as the fragment data type. Since the elements of the fragment are packed together, num_storage_elements will be smaller than num_elements for that fragment. The num_elements variable for a sub-byte fragment, hence returns the number of elements of sub-byte type element_type<T>. This is true for single bit precision as well, in which case, the mapping from element_type<T> to storage_element_type<T> is as follows:
experimental::precision::u4 -> unsigned (8 elements in 1 storage element)
experimental::precision::s4 -> int (8 elements in 1 storage element)
experimental::precision::b1 -> unsigned (32 elements in 1 storage element)
T -> T //all other types
The allowed layouts for sub-byte fragments is always row_major for matrix_a and col_major for matrix_b.
For sub-byte operations the value of ldm in load_matrix_sync should be a multiple of 32 for element type experimental::precision::u4 and experimental::precision::s4 or a multiple of 128 for element type experimental::precision::b1 (i.e., multiple of 16 bytes in both cases).
Note
Support for the following variants for MMA instructions is deprecated and will be removed in sm_90:
experimental::precision::u4
experimental::precision::s4
experimental::precision::b1withbmmaBitOpset tobmmaBitOpXOR
bmma_sync-
Waits until all warp lanes have executed bmma_sync, and then performs the warp-synchronous bit matrix multiply-accumulate operation
D = (A op B) + C, whereopconsists of a logical operationbmmaBitOpfollowed by the accumulation defined bybmmaAccumulateOp. The available operations are:bmmaBitOpXOR, a 128-bit XOR of a row inmatrix_awith the 128-bit column ofmatrix_bbmmaBitOpAND, a 128-bit AND of a row inmatrix_awith the 128-bit column ofmatrix_b, available on devices with compute capability 8.0 and higher.The accumulate op is always
bmmaAccumulateOpPOPCwhich counts the number of set bits.
7.24.5. Restrictions
The special format required by tensor cores may be different for each major and minor device architecture. This is further complicated by threads holding only a fragment (opaque architecture-specific ABI data structure) of the overall matrix, with the developer not allowed to make assumptions on how the individual parameters are mapped to the registers participating in the matrix multiply-accumulate.
Since fragments are architecture-specific, it is unsafe to pass them from function A to function B if the functions have been compiled for different link-compatible architectures and linked together into the same device executable. In this case, the size and layout of the fragment will be specific to one architecture and using WMMA APIs in the other will lead to incorrect results or potentially, corruption.
An example of two link-compatible architectures, where the layout of the fragment differs, is sm_70 and sm_75.
fragA.cu: void foo() { wmma::fragment<...> mat_a; bar(&mat_a); }
fragB.cu: void bar(wmma::fragment<...> *mat_a) { // operate on mat_a }
// sm_70 fragment layout
$> nvcc -dc -arch=compute_70 -code=sm_70 fragA.cu -o fragA.o
// sm_75 fragment layout
$> nvcc -dc -arch=compute_75 -code=sm_75 fragB.cu -o fragB.o
// Linking the two together
$> nvcc -dlink -arch=sm_75 fragA.o fragB.o -o frag.o
This undefined behavior might also be undetectable at compilation time and by tools at runtime, so extra care is needed to make sure the layout of the fragments is consistent. This linking hazard is most likely to appear when linking with a legacy library that is both built for a different link-compatible architecture and expecting to be passed a WMMA fragment.
Note that in the case of weak linkages (for example, a CUDA C++ inline function), the linker may choose any available function definition which may result in implicit passes between compilation units.
To avoid these sorts of problems, the matrix should always be stored out to memory for transit through external interfaces (e.g. wmma::store_matrix_sync(dst, …);) and then it can be safely passed to bar() as a pointer type [e.g. float *dst].
Note that since sm_70 can run on sm_75, the above example sm_75 code can be changed to sm_70 and correctly work on sm_75. However, it is recommended to have sm_75 native code in your application when linking with other sm_75 separately compiled binaries.
7.24.6. Element Types and Matrix Sizes
Tensor Cores support a variety of element types and matrix sizes. The following table presents the various combinations of matrix_a, matrix_b and accumulator matrix supported:
Matrix A |
Matrix B |
Accumulator |
Matrix Size (m-n-k) |
|---|---|---|---|
__half |
__half |
float |
16x16x16 |
__half |
__half |
float |
32x8x16 |
__half |
__half |
float |
8x32x16 |
__half |
__half |
__half |
16x16x16 |
__half |
__half |
__half |
32x8x16 |
__half |
__half |
__half |
8x32x16 |
unsigned char |
unsigned char |
int |
16x16x16 |
unsigned char |
unsigned char |
int |
32x8x16 |
unsigned char |
unsigned char |
int |
8x32x16 |
signed char |
signed char |
int |
16x16x16 |
signed char |
signed char |
int |
32x8x16 |
signed char |
signed char |
int |
8x32x16 |
Alternate Floating Point support:
Matrix A |
Matrix B |
Accumulator |
Matrix Size (m-n-k) |
|---|---|---|---|
__nv_bfloat16 |
__nv_bfloat16 |
float |
16x16x16 |
__nv_bfloat16 |
__nv_bfloat16 |
float |
32x8x16 |
__nv_bfloat16 |
__nv_bfloat16 |
float |
8x32x16 |
precision::tf32 |
precision::tf32 |
float |
16x16x8 |
Double Precision Support:
Matrix A |
Matrix B |
Accumulator |
Matrix Size (m-n-k) |
|---|---|---|---|
double |
double |
double |
8x8x4 |
Experimental support for sub-byte operations:
Matrix A |
Matrix B |
Accumulator |
Matrix Size (m-n-k) |
|---|---|---|---|
precision::u4 |
precision::u4 |
int |
8x8x32 |
precision::s4 |
precision::s4 |
int |
8x8x32 |
precision::b1 |
precision::b1 |
int |
8x8x128 |
7.24.7. Example
The following code implements a 16x16x16 matrix multiplication in a single warp.
#include <mma.h>
using namespace nvcuda;
__global__ void wmma_ker(half *a, half *b, float *c) {
// Declare the fragments
wmma::fragment<wmma::matrix_a, 16, 16, 16, half, wmma::col_major> a_frag;
wmma::fragment<wmma::matrix_b, 16, 16, 16, half, wmma::row_major> b_frag;
wmma::fragment<wmma::accumulator, 16, 16, 16, float> c_frag;
// Initialize the output to zero
wmma::fill_fragment(c_frag, 0.0f);
// Load the inputs
wmma::load_matrix_sync(a_frag, a, 16);
wmma::load_matrix_sync(b_frag, b, 16);
// Perform the matrix multiplication
wmma::mma_sync(c_frag, a_frag, b_frag, c_frag);
// Store the output
wmma::store_matrix_sync(c, c_frag, 16, wmma::mem_row_major);
}
7.25. DPX
DPX is a set of functions that enable finding min and max values, as well as fused addition and min/max, for up to three 16 and 32-bit signed or unsigned integer parameters, with optional ReLU (clamping to zero):
three parameters:
__vimax3_s32,__vimax3_s16x2,__vimax3_u32,__vimax3_u16x2,__vimin3_s32,__vimin3_s16x2,__vimin3_u32,__vimin3_u16x2two parameters, with ReLU:
__vimax_s32_relu,__vimax_s16x2_relu,__vimin_s32_relu,__vimin_s16x2_reluthree parameters, with ReLU:
__vimax3_s32_relu,__vimax3_s16x2_relu,__vimin3_s32_relu,__vimin3_s16x2_relutwo parameters, also returning which parameter was smaller/larger:
__vibmax_s32,__vibmax_u32,__vibmin_s32,__vibmin_u32,__vibmax_s16x2,__vibmax_u16x2,__vibmin_s16x2,__vibmin_u16x2three parameters, comparing (first + second) with the third:
__viaddmax_s32,__viaddmax_s16x2,__viaddmax_u32,__viaddmax_u16x2,__viaddmin_s32,__viaddmin_s16x2,__viaddmin_u32,__viaddmin_u16x2three parameters, with ReLU, comparing (first + second) with the third and a zero:
__viaddmax_s32_relu,__viaddmax_s16x2_relu,__viaddmin_s32_relu,__viaddmin_s16x2_relu
These instructions are hardware-accelerated on devices with compute capability 9 and higher, and software emulation on older devices.
Full API can be found in CUDA Math API documentation.
DPX is exceptionally useful when implementing dynamic programming algorithms, such as Smith-Waterman or Needleman–Wunsch in genomics and Floyd-Warshall in route optimization.
7.25.1. Examples
Max value of three signed 32-bit integers, with ReLU
const int a = -15;
const int b = 8;
const int c = 5;
int max_value_0 = __vimax3_s32_relu(a, b, c); // max(-15, 8, 5, 0) = 8
const int d = -2;
const int e = -4;
int max_value_1 = __vimax3_s32_relu(a, d, e); // max(-15, -2, -4, 0) = 0
Min value of the sum of two 32-bit signed integers, another 32-bit signed integer and a zero (ReLU)
const int a = -5;
const int b = 6;
const int c = -2;
int max_value_0 = __viaddmax_s32_relu(a, b, c); // max(-5 + 6, -2, 0) = max(1, -2, 0) = 1
const int d = 4;
int max_value_1 = __viaddmax_s32_relu(a, d, c); // max(-5 + 4, -2, 0) = max(-1, -2, 0) = 0
Min value of two unsigned 32-bit integers and determining which value is smaller
const unsigned int a = 9;
const unsigned int b = 6;
bool smaller_value;
unsigned int min_value = __vibmin_u32(a, b, &smaller_value); // min_value is 6, smaller_value is true
Max values of three pairs of unsigned 16-bit integers
const unsigned a = 0x00050002;
const unsigned b = 0x00070004;
const unsigned c = 0x00020006;
unsigned int max_value = __vimax3_u16x2(a, b, c); // max(5, 7, 2) and max(2, 4, 6), so max_value is 0x00070006
7.26. Asynchronous Barrier
The NVIDIA C++ standard library introduces a GPU implementation of std::barrier. Along with the implementation of std::barrier the library provides extensions that allow users to specify the scope of barrier objects. The barrier API scopes are documented under Thread Scopes. Devices of compute capability 8.0 or higher provide hardware acceleration for barrier operations and integration of these barriers with the memcpy_async feature. On devices with compute capability below 8.0 but starting 7.0, these barriers are available without hardware acceleration.
nvcuda::experimental::awbarrier is deprecated in favor of cuda::barrier.
7.26.1. Simple Synchronization Pattern
Without the arrive/wait barrier, synchronization is achieved using __syncthreads() (to synchronize all threads in a block) or group.sync() when using Cooperative Groups.
#include <cooperative_groups.h>
__global__ void simple_sync(int iteration_count) {
auto block = cooperative_groups::this_thread_block();
for (int i = 0; i < iteration_count; ++i) {
/* code before arrive */
block.sync(); /* wait for all threads to arrive here */
/* code after wait */
}
}
Threads are blocked at the synchronization point (block.sync()) until all threads have reached the synchronization point. In addition, memory updates that happened before the synchronization point are guaranteed to be visible to all threads in the block after the synchronization point, i.e., equivalent to atomic_thread_fence(memory_order_seq_cst, thread_scope_block) as well as the sync.
This pattern has three stages:
Code before sync performs memory updates that will be read after the sync.
Synchronization point
Code after sync point with visibility of memory updates that happened before sync point.
7.26.2. Temporal Splitting and Five Stages of Synchronization
The temporally-split synchronization pattern with the std::barrier is as follows.
#include <cuda/barrier>
#include <cooperative_groups.h>
__device__ void compute(float* data, int curr_iteration);
__global__ void split_arrive_wait(int iteration_count, float *data) {
using barrier = cuda::barrier<cuda::thread_scope_block>;
__shared__ barrier bar;
auto block = cooperative_groups::this_thread_block();
if (block.thread_rank() == 0) {
init(&bar, block.size()); // Initialize the barrier with expected arrival count
}
block.sync();
for (int curr_iter = 0; curr_iter < iteration_count; ++curr_iter) {
/* code before arrive */
barrier::arrival_token token = bar.arrive(); /* this thread arrives. Arrival does not block a thread */
compute(data, curr_iter);
bar.wait(std::move(token)); /* wait for all threads participating in the barrier to complete bar.arrive()*/
/* code after wait */
}
}
In this pattern, the synchronization point (block.sync()) is split into an arrive point (bar.arrive()) and a wait point (bar.wait(std::move(token))). A thread begins participating in a cuda::barrier with its first call to bar.arrive(). When a thread calls bar.wait(std::move(token)) it will be blocked until participating threads have completed bar.arrive() the expected number of times as specified by the expected arrival count argument passed to init(). Memory updates that happen before participating threads’ call to bar.arrive() are guaranteed to be visible to participating threads after their call to bar.wait(std::move(token)). Note that the call to bar.arrive() does not block a thread, it can proceed with other work that does not depend upon memory updates that happen before other participating threads’ call to bar.arrive().
The arrive and then wait pattern has five stages which may be iteratively repeated:
Code before arrive performs memory updates that will be read after the wait.
Arrive point with implicit memory fence (i.e., equivalent to
atomic_thread_fence(memory_order_seq_cst, thread_scope_block)).Code between arrive and wait.
Wait point.
Code after the wait, with visibility of updates that were performed before the arrive.
7.26.3. Bootstrap Initialization, Expected Arrival Count, and Participation
Initialization must happen before any thread begins participating in a cuda::barrier.
#include <cuda/barrier>
#include <cooperative_groups.h>
__global__ void init_barrier() {
__shared__ cuda::barrier<cuda::thread_scope_block> bar;
auto block = cooperative_groups::this_thread_block();
if (block.thread_rank() == 0) {
init(&bar, block.size()); // Single thread initializes the total expected arrival count.
}
block.sync();
}
Before any thread can participate in cuda::barrier, the barrier must be initialized using init() with an expected arrival count, block.size() in this example. Initialization must happen before any thread calls bar.arrive(). This poses a bootstrapping challenge in that threads must synchronize before participating in the cuda::barrier, but threads are creating a cuda::barrier in order to synchronize. In this example, threads that will participate are part of a cooperative group and use block.sync() to bootstrap initialization. In this example a whole thread block is participating in initialization, hence __syncthreads() could also be used.
The second parameter of init() is the expected arrival count, i.e., the number of times bar.arrive() will be called by participating threads before a participating thread is unblocked from its call to bar.wait(std::move(token)). In the prior example the cuda::barrier is initialized with the number of threads in the thread block i.e., cooperative_groups::this_thread_block().size(), and all threads within the thread block participate in the barrier.
A cuda::barrier is flexible in specifying how threads participate (split arrive/wait) and which threads participate. In contrast this_thread_block.sync() from cooperative groups or __syncthreads() is applicable to whole-thread-block and __syncwarp(mask) is a specified subset of a warp. If the intention of the user is to synchronize a full thread block or a full warp we recommend using __syncthreads() and __syncwarp(mask) respectively for performance reasons.
7.26.4. A Barrier’s Phase: Arrival, Countdown, Completion, and Reset
A cuda::barrier counts down from the expected arrival count to zero as participating threads call bar.arrive(). When the countdown reaches zero, a cuda::barrier is complete for the current phase. When the last call to bar.arrive() causes the countdown to reach zero, the countdown is automatically and atomically reset. The reset assigns the countdown to the expected arrival count, and moves the cuda::barrier to the next phase.
A token object of class cuda::barrier::arrival_token, as returned from token=bar.arrive(), is associated with the current phase of the barrier. A call to bar.wait(std::move(token)) blocks the calling thread while the cuda::barrier is in the current phase, i.e., while the phase associated with the token matches the phase of the cuda::barrier. If the phase is advanced (because the countdown reaches zero) before the call to bar.wait(std::move(token)) then the thread does not block; if the phase is advanced while the thread is blocked in bar.wait(std::move(token)), the thread is unblocked.
It is essential to know when a reset could or could not occur, especially in non-trivial arrive/wait synchronization patterns.
A thread’s calls to
token=bar.arrive()andbar.wait(std::move(token))must be sequenced such thattoken=bar.arrive()occurs during thecuda::barrier’s current phase, andbar.wait(std::move(token))occurs during the same or next phase.A thread’s call to
bar.arrive()must occur when the barrier’s counter is non-zero. After barrier initialization, if a thread’s call tobar.arrive()causes the countdown to reach zero then a call tobar.wait(std::move(token))must happen before the barrier can be reused for a subsequent call tobar.arrive().bar.wait()must only be called using atokenobject of the current phase or the immediately preceding phase. For any other values of thetokenobject, the behavior is undefined.
For simple arrive/wait synchronization patterns, compliance with these usage rules is straightforward.
7.26.5. Spatial Partitioning (also known as Warp Specialization)
A thread block can be spatially partitioned such that warps are specialized to perform independent computations. Spatial partitioning is used in a producer or consumer pattern, where one subset of threads produces data that is concurrently consumed by the other (disjoint) subset of threads.
A producer/consumer spatial partitioning pattern requires two one sided synchronizations to manage a data buffer between the producer and consumer.
Producer |
Consumer |
|---|---|
wait for buffer to be ready to be filled |
signal buffer is ready to be filled |
produce data and fill the buffer |
|
signal buffer is filled |
wait for buffer to be filled |
consume data in filled buffer |
Producer threads wait for consumer threads to signal that the buffer is ready to be filled; however, consumer threads do not wait for this signal. Consumer threads wait for producer threads to signal that the buffer is filled; however, producer threads do not wait for this signal. For full producer/consumer concurrency this pattern has (at least) double buffering where each buffer requires two cuda::barriers.
#include <cuda/barrier>
#include <cooperative_groups.h>
using barrier = cuda::barrier<cuda::thread_scope_block>;
__device__ void producer(barrier ready[], barrier filled[], float* buffer, float* in, int N, int buffer_len)
{
for (int i = 0; i < (N/buffer_len); ++i) {
ready[i%2].arrive_and_wait(); /* wait for buffer_(i%2) to be ready to be filled */
/* produce, i.e., fill in, buffer_(i%2) */
barrier::arrival_token token = filled[i%2].arrive(); /* buffer_(i%2) is filled */
}
}
__device__ void consumer(barrier ready[], barrier filled[], float* buffer, float* out, int N, int buffer_len)
{
barrier::arrival_token token1 = ready[0].arrive(); /* buffer_0 is ready for initial fill */
barrier::arrival_token token2 = ready[1].arrive(); /* buffer_1 is ready for initial fill */
for (int i = 0; i < (N/buffer_len); ++i) {
filled[i%2].arrive_and_wait(); /* wait for buffer_(i%2) to be filled */
/* consume buffer_(i%2) */
barrier::arrival_token token = ready[i%2].arrive(); /* buffer_(i%2) is ready to be re-filled */
}
}
//N is the total number of float elements in arrays in and out
__global__ void producer_consumer_pattern(int N, int buffer_len, float* in, float* out) {
// Shared memory buffer declared below is of size 2 * buffer_len
// so that we can alternatively work between two buffers.
// buffer_0 = buffer and buffer_1 = buffer + buffer_len
__shared__ extern float buffer[];
// bar[0] and bar[1] track if buffers buffer_0 and buffer_1 are ready to be filled,
// while bar[2] and bar[3] track if buffers buffer_0 and buffer_1 are filled-in respectively
__shared__ barrier bar[4];
auto block = cooperative_groups::this_thread_block();
if (block.thread_rank() < 4)
init(bar + block.thread_rank(), block.size());
block.sync();
if (block.thread_rank() < warpSize)
producer(bar, bar+2, buffer, in, N, buffer_len);
else
consumer(bar, bar+2, buffer, out, N, buffer_len);
}
In this example the first warp is specialized as the producer and the remaining warps are specialized as the consumer. All producer and consumer threads participate (call bar.arrive() or bar.arrive_and_wait()) in each of the four cuda::barriers so the expected arrival counts are equal to block.size().
A producer thread waits for the consumer threads to signal that the shared memory buffer can be filled. In order to wait for a cuda::barrier a producer thread must first arrive on that ready[i%2].arrive() to get a token and then ready[i%2].wait(token) with that token. For simplicity ready[i%2].arrive_and_wait() combines these operations.
bar.arrive_and_wait();
/* is equivalent to */
bar.wait(bar.arrive());
Producer threads compute and fill the ready buffer, they then signal that the buffer is filled by arriving on the filled barrier, filled[i%2].arrive(). A producer thread does not wait at this point, instead it waits until the next iteration’s buffer (double buffering) is ready to be filled.
A consumer thread begins by signaling that both buffers are ready to be filled. A consumer thread does not wait at this point, instead it waits for this iteration’s buffer to be filled, filled[i%2].arrive_and_wait(). After the consumer threads consume the buffer they signal that the buffer is ready to be filled again, ready[i%2].arrive(), and then wait for the next iteration’s buffer to be filled.
7.26.6. Early Exit (Dropping out of Participation)
When a thread that is participating in a sequence of synchronizations must exit early from that sequence, that thread must explicitly drop out of participation before exiting. The remaining participating threads can proceed normally with subsequent cuda::barrier arrive and wait operations.
#include <cuda/barrier>
#include <cooperative_groups.h>
__device__ bool condition_check();
__global__ void early_exit_kernel(int N) {
using barrier = cuda::barrier<cuda::thread_scope_block>;
__shared__ barrier bar;
auto block = cooperative_groups::this_thread_block();
if (block.thread_rank() == 0)
init(&bar , block.size());
block.sync();
for (int i = 0; i < N; ++i) {
if (condition_check()) {
bar.arrive_and_drop();
return;
}
/* other threads can proceed normally */
barrier::arrival_token token = bar.arrive();
/* code between arrive and wait */
bar.wait(std::move(token)); /* wait for all threads to arrive */
/* code after wait */
}
}
This operation arrives on the cuda::barrier to fulfill the participating thread’s obligation to arrive in the current phase, and then decrements the expected arrival count for the next phase so that this thread is no longer expected to arrive on the barrier.
7.26.7. Completion Function
The CompletionFunction of cuda::barrier<Scope, CompletionFunction> is executed once per phase, after the last thread arrives and before any thread is unblocked from the wait. Memory operations performed by the threads that arrived at the barrier during the phase are visible to the thread executing the CompletionFunction, and all memory operations performed within the CompletionFunction are visible to all threads waiting at the barrier once they are unblocked from the wait.
#include <cuda/barrier>
#include <cooperative_groups.h>
#include <functional>
namespace cg = cooperative_groups;
__device__ int divergent_compute(int*, int);
__device__ int independent_computation(int*, int);
__global__ void psum(int* data, int n, int* acc) {
auto block = cg::this_thread_block();
constexpr int BlockSize = 128;
__shared__ int smem[BlockSize];
assert(BlockSize == block.size());
assert(n % 128 == 0);
auto completion_fn = [&] {
int sum = 0;
for (int i = 0; i < 128; ++i) sum += smem[i];
*acc += sum;
};
// Barrier storage
// Note: the barrier is not default-constructible because
// completion_fn is not default-constructible due
// to the capture.
using completion_fn_t = decltype(completion_fn);
using barrier_t = cuda::barrier<cuda::thread_scope_block,
completion_fn_t>;
__shared__ std::aligned_storage<sizeof(barrier_t),
alignof(barrier_t)> bar_storage;
// Initialize barrier:
barrier_t* bar = (barrier_t*)&bar_storage;
if (block.thread_rank() == 0) {
assert(*acc == 0);
assert(blockDim.x == blockDim.y == blockDim.y == 1);
new (bar) barrier_t{block.size(), completion_fn};
// equivalent to: init(bar, block.size(), completion_fn);
}
block.sync();
// Main loop
for (int i = 0; i < n; i += block.size()) {
smem[block.thread_rank()] = data[i] + *acc;
auto t = bar->arrive();
// We can do independent computation here
bar->wait(std::move(t));
// shared-memory is safe to re-use in the next iteration
// since all threads are done with it, including the one
// that did the reduction
}
}
7.26.8. Memory Barrier Primitives Interface
Memory barrier primitives are C-like interfaces to cuda::barrier functionality. These primitives are available through including the <cuda_awbarrier_primitives.h> header.
7.26.8.1. Data Types
typedef /* implementation defined */ __mbarrier_t;
typedef /* implementation defined */ __mbarrier_token_t;
7.26.8.2. Memory Barrier Primitives API
uint32_t __mbarrier_maximum_count();
void __mbarrier_init(__mbarrier_t* bar, uint32_t expected_count);
barmust be a pointer to__shared__memory.expected_count <= __mbarrier_maximum_count()Initialize
*barexpected arrival count for the current and next phase toexpected_count.
void __mbarrier_inval(__mbarrier_t* bar);
barmust be a pointer to the mbarrier object residing in shared memory.Invalidation of
*baris required before the corresponding shared memory can be repurposed.
__mbarrier_token_t __mbarrier_arrive(__mbarrier_t* bar);
Initialization of
*barmust happen before this call.Pending count must not be zero.
Atomically decrement the pending count for the current phase of the barrier.
Return an arrival token associated with the barrier state immediately prior to the decrement.
__mbarrier_token_t __mbarrier_arrive_and_drop(__mbarrier_t* bar);
Initialization of
*barmust happen before this call.Pending count must not be zero.
Atomically decrement the pending count for the current phase and expected count for the next phase of the barrier.
Return an arrival token associated with the barrier state immediately prior to the decrement.
bool __mbarrier_test_wait(__mbarrier_t* bar, __mbarrier_token_t token);
tokenmust be associated with the immediately preceding phase or current phase of*this.Returns
trueiftokenis associated with the immediately preceding phase of*bar, otherwise returnsfalse.
//Note: This API has been deprecated in CUDA 11.1
uint32_t __mbarrier_pending_count(__mbarrier_token_t token);
7.27. Asynchronous Data Copies
CUDA 11 introduces Asynchronous Data operations with memcpy_async API to allow device code to explicitly manage the asynchronous copying of data. The memcpy_async feature enables CUDA kernels to overlap computation with data movement.
7.27.1. memcpy_async API
The memcpy_async APIs are provided in the cuda/barrier, cuda/pipeline, and cooperative_groups/memcpy_async.h header files.
The cuda::memcpy_async APIs work with cuda::barrier and cuda::pipeline synchronization primitives, while the cooperative_groups::memcpy_async synchronizes using coopertive_groups::wait.
These APIs have very similar semantics: copy objects from src to dst as-if performed by another thread which, on completion of the copy, can be synchronized through cuda::pipeline, cuda::barrier, or cooperative_groups::wait.
The complete API documentation of the cuda::memcpy_async overloads for cuda::barrier and cuda::pipeline is provided in the libcudacxx API documentation along with some examples.
The API documentation of cooperative_groups::memcpy_async is provided in the Cooperative Groups section.
The memcpy_async APIs that use cuda::barrier and cuda::pipeline require compute capability 7.0 or higher. On devices with compute capability 8.0 or higher, memcpy_async operations from global to shared memory can benefit from hardware acceleration.
7.27.3. Without memcpy_async
Without memcpy_async, the copy phase of the copy and compute pattern is expressed as shared[local_idx] = global[global_idx]. This global to shared memory copy is expanded to a read from global memory into a register, followed by a write to shared memory from the register.
When this pattern occurs within an iterative algorithm, each thread block needs to synchronize after the shared[local_idx] = global[global_idx] assignment, to ensure all writes to shared memory have completed before the compute phase can begin. The thread block also needs to synchronize again after the compute phase, to prevent overwriting shared memory before all threads have completed their computations. This pattern is illustrated in the following code snippet.
#include <cooperative_groups.h>
__device__ void compute(int* global_out, int const* shared_in) {
// Computes using all values of current batch from shared memory.
// Stores this thread's result back to global memory.
}
__global__ void without_memcpy_async(int* global_out, int const* global_in, size_t size, size_t batch_sz) {
auto grid = cooperative_groups::this_grid();
auto block = cooperative_groups::this_thread_block();
assert(size == batch_sz * grid.size()); // Exposition: input size fits batch_sz * grid_size
extern __shared__ int shared[]; // block.size() * sizeof(int) bytes
size_t local_idx = block.thread_rank();
for (size_t batch = 0; batch < batch_sz; ++batch) {
// Compute the index of the current batch for this block in global memory:
size_t block_batch_idx = block.group_index().x * block.size() + grid.size() * batch;
size_t global_idx = block_batch_idx + threadIdx.x;
shared[local_idx] = global_in[global_idx];
block.sync(); // Wait for all copies to complete
compute(global_out + block_batch_idx, shared); // Compute and write result to global memory
block.sync(); // Wait for compute using shared memory to finish
}
}
7.27.4. With memcpy_async
With memcpy_async, the assignment of shared memory from global memory
shared[local_idx] = global_in[global_idx];
is replaced with an asynchronous copy operation from cooperative groups
cooperative_groups::memcpy_async(group, shared, global_in + batch_idx, sizeof(int) * block.size());
The cooperative_groups::memcpy_async API copies sizeof(int) * block.size() bytes from global memory starting at global_in + batch_idx to the shared data. This operation happens as-if performed by another thread, which synchronizes with the current thread’s call to cooperative_groups::wait after the copy has completed. Until the copy operation completes, modifying the global data or reading or writing the shared data introduces a data race.
On devices with compute capability 8.0 or higher, memcpy_async transfers from global to shared memory can benefit from hardware acceleration, which avoids transfering the data through an intermediate register.
#include <cooperative_groups.h>
#include <cooperative_groups/memcpy_async.h>
__device__ void compute(int* global_out, int const* shared_in);
__global__ void with_memcpy_async(int* global_out, int const* global_in, size_t size, size_t batch_sz) {
auto grid = cooperative_groups::this_grid();
auto block = cooperative_groups::this_thread_block();
assert(size == batch_sz * grid.size()); // Exposition: input size fits batch_sz * grid_size
extern __shared__ int shared[]; // block.size() * sizeof(int) bytes
for (size_t batch = 0; batch < batch_sz; ++batch) {
size_t block_batch_idx = block.group_index().x * block.size() + grid.size() * batch;
// Whole thread-group cooperatively copies whole batch to shared memory:
cooperative_groups::memcpy_async(block, shared, global_in + block_batch_idx, sizeof(int) * block.size());
cooperative_groups::wait(block); // Joins all threads, waits for all copies to complete
compute(global_out + block_batch_idx, shared);
block.sync();
}
}}
7.27.5. Asynchronous Data Copies using cuda::barrier
The cuda::memcpy_async overload for cuda::barrier enables synchronizing asynchronous data transfers using a barrier. This overloads executes the copy operation as-if performed by another thread bound to the barrier by: incrementing the expected count of the current phase on creation, and decrementing it on completion of the copy operation, such that the phase of the barrier will only advance when all threads participating in the barrier have arrived, and all memcpy_async bound to the current phase of the barrier have completed. The following example uses a block-wide barrier, where all block threads participate, and swaps the wait operation with a barrier arrive_and_wait, while providing the same functionality as the previous example:
#include <cooperative_groups.h>
#include <cuda/barrier>
__device__ void compute(int* global_out, int const* shared_in);
__global__ void with_barrier(int* global_out, int const* global_in, size_t size, size_t batch_sz) {
auto grid = cooperative_groups::this_grid();
auto block = cooperative_groups::this_thread_block();
assert(size == batch_sz * grid.size()); // Assume input size fits batch_sz * grid_size
extern __shared__ int shared[]; // block.size() * sizeof(int) bytes
// Create a synchronization object (C++20 barrier)
__shared__ cuda::barrier<cuda::thread_scope::thread_scope_block> barrier;
if (block.thread_rank() == 0) {
init(&barrier, block.size()); // Friend function initializes barrier
}
block.sync();
for (size_t batch = 0; batch < batch_sz; ++batch) {
size_t block_batch_idx = block.group_index().x * block.size() + grid.size() * batch;
cuda::memcpy_async(block, shared, global_in + block_batch_idx, sizeof(int) * block.size(), barrier);
barrier.arrive_and_wait(); // Waits for all copies to complete
compute(global_out + block_batch_idx, shared);
block.sync();
}
}
7.27.6. Performance Guidance for memcpy_async
For compute capability 8.x, the pipeline mechanism is shared among CUDA threads in the same CUDA warp. This sharing causes batches of memcpy_async to be entangled within a warp, which can impact performance under certain circumstances.
This section highlights the warp-entanglement effect on commit, wait, and arrive operations. Please refer to Pipeline Interface and the Pipeline Primitives Interface for an overview of the individual operations.
7.27.6.1. Alignment
On devices with compute capability 8.0, the cp.async family of instructions allows copying data from global to shared memory asynchronously. These instructions support copying 4, 8, and 16 bytes at a time. If the size provided to memcpy_async is a multiple of 4, 8, or 16, and both pointers passed to memcpy_async are aligned to a 4, 8, or 16 alignment boundary, then memcpy_async can be implemented using exclusively asynchronous memory operations.
Additionally for achieving best performance when using memcpy_async API, an alignment of 128 Bytes for both shared memory and global memory is required.
For pointers to values of types with an alignment requirement of 1 or 2, it is often not possible to prove that the pointers are always aligned to a higher alignment boundary. Determining whether the cp.async instructions can or cannot be used must be delayed until run-time. Performing such a runtime alignment check increases code-size and adds runtime overhead.
The cuda::aligned_size_t<size_t Align>(size_t size)Shape can be used to supply a proof that both pointers passed to memcpy_async are aligned to an Align alignment boundary and that size is a multiple of Align, by passing it as an argument where the memcpy_async APIs expect a Shape:
cuda::memcpy_async(group, dst, src, cuda::aligned_size_t<16>(N * block.size()), pipeline);
If the proof is incorrect, the behavior is undefined.
7.27.6.2. Trivially copyable
On devices with compute capability 8.0, the cp.async family of instructions allows copying data from global to shared memory asynchronously. If the pointer types passed to memcpy_async do not point to TriviallyCopyable types, the copy constructor of each output element needs to be invoked, and these instructions cannot be used to accelerate memcpy_async.
7.27.6.3. Warp Entanglement - Commit
The sequence of memcpy_async batches is shared across the warp. The commit operation is coalesced such that the sequence is incremented once for all converged threads that invoke the commit operation. If the warp is fully converged, the sequence is incremented by one; if the warp is fully diverged, the sequence is incremented by 32.
-
Let PB be the warp-shared pipeline’s actual sequence of batches.
PB = {BP0, BP1, BP2, …, BPL} -
Let TB be a thread’s perceived sequence of batches, as if the sequence were only incremented by this thread’s invocation of the commit operation.
TB = {BT0, BT1, BT2, …, BTL}The
pipeline::producer_commit()return value is from the thread’s perceived batch sequence. -
An index in a thread’s perceived sequence always aligns to an equal or larger index in the actual warp-shared sequence. The sequences are equal only when all commit operations are invoked from converged threads.
BTn ≡ BPmwheren <= m
For example, when a warp is fully diverged:
The warp-shared pipeline’s actual sequence would be:
PB = {0, 1, 2, 3, ..., 31}(PL=31).-
The perceived sequence for each thread of this warp would be:
Thread 0:
TB = {0}(TL=0)Thread 1:
TB = {0}(TL=0)…Thread 31:
TB = {0}(TL=0)
7.27.6.4. Warp Entanglement - Wait
A CUDA thread invokes either pipeline_consumer_wait_prior<N>() or pipeline::consumer_wait() to wait for batches in the perceived sequence TB to complete. Note that pipeline::consumer_wait() is equivalent to pipeline_consumer_wait_prior<N>(), where N = PL.
The pipeline_consumer_wait_prior<N>() function waits for batches in the actual sequence at least up to and including PL-N. Since TL <= PL, waiting for batch up to and including PL-N includes waiting for batch TL-N. Thus, when TL < PL, the thread will unintentionally wait for additional, more recent batches.
In the extreme fully-diverged warp example above, each thread could wait for all 32 batches.
7.27.6.5. Warp Entanglement - Arrive-On
Warp-divergence affects the number of times an arrive_on(bar) operation updates the barrier. If the invoking warp is fully converged, then the barrier is updated once. If the invoking warp is fully diverged, then 32 individual updates are applied to the barrier.
7.27.6.6. Keep Commit and Arrive-On Operations Converged
It is recommended that commit and arrive-on invocations are by converged threads:
to not over-wait, by keeping threads’ perceived sequence of batches aligned with the actual sequence, and
to minimize updates to the barrier object.
When code preceding these operations diverges threads, then the warp should be re-converged, via __syncwarp before invoking commit or arrive-on operations.
7.28. Asynchronous Data Copies using cuda::pipeline
CUDA provides the cuda::pipeline synchronization object to manage and overlap asynchronous data movement with computation.
The API documentation for cuda::pipeline is provided in the libcudacxx API. A pipeline object is a double-ended N stage queue with a head and a tail, and is used to process work in a first-in first-out (FIFO) order. The pipeline object has following member functions to manage the stages of the pipeline.
Pipeline Class Member Function |
Description |
|---|---|
|
Acquires an available stage in the pipeline internal queue. |
|
Commits the asynchronous operations issued after the |
|
Wait for completion of all asynchronous operations on the oldest stage of the pipeline. |
|
Release the oldest stage of the pipeline to the pipeline object for reuse. The released stage can be then acquired by the producer. |
7.28.1. Single-Stage Asynchronous Data Copies using cuda::pipeline
In previous examples we showed how to use cooperative_groups and cuda::barrier to do asynchronous data transfers. In this section, we will use the cuda::pipeline API with a single stage to schedule asynchronous copies. And later we will expand this example to show multi staged overlapped compute and copy.
#include <cooperative_groups/memcpy_async.h>
#include <cuda/pipeline>
__device__ void compute(int* global_out, int const* shared_in);
__global__ void with_single_stage(int* global_out, int const* global_in, size_t size, size_t batch_sz) {
auto grid = cooperative_groups::this_grid();
auto block = cooperative_groups::this_thread_block();
assert(size == batch_sz * grid.size()); // Assume input size fits batch_sz * grid_size
constexpr size_t stages_count = 1; // Pipeline with one stage
// One batch must fit in shared memory:
extern __shared__ int shared[]; // block.size() * sizeof(int) bytes
// Allocate shared storage for a single stage cuda::pipeline:
__shared__ cuda::pipeline_shared_state<
cuda::thread_scope::thread_scope_block,
stages_count
> shared_state;
auto pipeline = cuda::make_pipeline(block, &shared_state);
// Each thread processes `batch_sz` elements.
// Compute offset of the batch `batch` of this thread block in global memory:
auto block_batch = [&](size_t batch) -> int {
return block.group_index().x * block.size() + grid.size() * batch;
};
for (size_t batch = 0; batch < batch_sz; ++batch) {
size_t global_idx = block_batch(batch);
// Collectively acquire the pipeline head stage from all producer threads:
pipeline.producer_acquire();
// Submit async copies to the pipeline's head stage to be
// computed in the next loop iteration
cuda::memcpy_async(block, shared, global_in + global_idx, sizeof(int) * block.size(), pipeline);
// Collectively commit (advance) the pipeline's head stage
pipeline.producer_commit();
// Collectively wait for the operations committed to the
// previous `compute` stage to complete:
pipeline.consumer_wait();
// Computation overlapped with the memcpy_async of the "copy" stage:
compute(global_out + global_idx, shared);
// Collectively release the stage resources
pipeline.consumer_release();
}
}
7.28.2. Multi-Stage Asynchronous Data Copies using cuda::pipeline
In the previous examples with cooperative_groups::wait and cuda::barrier, the kernel threads immediately wait for the data transfer to shared memory to complete. This avoids data transfers from global memory into registers, but does not hide the latency of the memcpy_async operation by overlapping computation.
For that we use the CUDA pipeline feature in the following example. It provides a mechanism for managing a sequence of memcpy_async batches, enabling CUDA kernels to overlap memory transfers with computation. The following example implements a two-stage pipeline that overlaps data-transfer with computation. It:
Initializes the pipeline shared state (more below)
Kickstarts the pipeline by scheduling a
memcpy_asyncfor the first batch.Loops over all the batches: it schedules
memcpy_asyncfor the next batch, blocks all threads on the completion of thememcpy_asyncfor the previous batch, and then overlaps the computation on the previous batch with the asynchronous copy of the memory for the next batch.Finally, it drains the pipeline by performing the computation on the last batch.
Note that, for interoperability with cuda::pipeline, cuda::memcpy_async from the cuda/pipeline header is used here.
#include <cooperative_groups/memcpy_async.h>
#include <cuda/pipeline>
__device__ void compute(int* global_out, int const* shared_in);
__global__ void with_staging(int* global_out, int const* global_in, size_t size, size_t batch_sz) {
auto grid = cooperative_groups::this_grid();
auto block = cooperative_groups::this_thread_block();
assert(size == batch_sz * grid.size()); // Assume input size fits batch_sz * grid_size
constexpr size_t stages_count = 2; // Pipeline with two stages
// Two batches must fit in shared memory:
extern __shared__ int shared[]; // stages_count * block.size() * sizeof(int) bytes
size_t shared_offset[stages_count] = { 0, block.size() }; // Offsets to each batch
// Allocate shared storage for a two-stage cuda::pipeline:
__shared__ cuda::pipeline_shared_state<
cuda::thread_scope::thread_scope_block,
stages_count
> shared_state;
auto pipeline = cuda::make_pipeline(block, &shared_state);
// Each thread processes `batch_sz` elements.
// Compute offset of the batch `batch` of this thread block in global memory:
auto block_batch = [&](size_t batch) -> int {
return block.group_index().x * block.size() + grid.size() * batch;
};
// Initialize first pipeline stage by submitting a `memcpy_async` to fetch a whole batch for the block:
if (batch_sz == 0) return;
pipeline.producer_acquire();
cuda::memcpy_async(block, shared + shared_offset[0], global_in + block_batch(0), sizeof(int) * block.size(), pipeline);
pipeline.producer_commit();
// Pipelined copy/compute:
for (size_t batch = 1; batch < batch_sz; ++batch) {
// Stage indices for the compute and copy stages:
size_t compute_stage_idx = (batch - 1) % 2;
size_t copy_stage_idx = batch % 2;
size_t global_idx = block_batch(batch);
// Collectively acquire the pipeline head stage from all producer threads:
pipeline.producer_acquire();
// Submit async copies to the pipeline's head stage to be
// computed in the next loop iteration
cuda::memcpy_async(block, shared + shared_offset[copy_stage_idx], global_in + global_idx, sizeof(int) * block.size(), pipeline);
// Collectively commit (advance) the pipeline's head stage
pipeline.producer_commit();
// Collectively wait for the operations commited to the
// previous `compute` stage to complete:
pipeline.consumer_wait();
// Computation overlapped with the memcpy_async of the "copy" stage:
compute(global_out + global_idx, shared + shared_offset[compute_stage_idx]);
// Collectively release the stage resources
pipeline.consumer_release();
}
// Compute the data fetch by the last iteration
pipeline.consumer_wait();
compute(global_out + block_batch(batch_sz-1), shared + shared_offset[(batch_sz - 1) % 2]);
pipeline.consumer_release();
}
A pipeline object is a double-ended queue with a head and a tail, and is used to process work in a first-in first-out (FIFO) order. Producer threads commit work to the pipeline’s head, while consumer threads pull work from the pipeline’s tail. In the example above, all threads are both producer and consumer threads. The threads first commitmemcpy_async operations to fetch the next batch while they wait on the previous batch of memcpy_async operations to complete.
-
Committing work to a pipeline stage involves:
Collectively acquiring the pipeline head from a set of producer threads using
pipeline.producer_acquire().Submitting
memcpy_asyncoperations to the pipeline head.Collectively commiting (advancing) the pipeline head using
pipeline.producer_commit().
-
Using a previously commited stage involves:
Collectively waiting for the stage to complete, e.g., using
pipeline.consumer_wait()to wait on the tail (oldest) stage.Collectively releasing the stage using
pipeline.consumer_release().
cuda::pipeline_shared_state<scope, count> encapsulates the finite resources that allow a pipeline to process up to count concurrent stages. If all resources are in use, pipeline.producer_acquire() blocks producer threads until the resources of the next pipeline stage are released by consumer threads.
This example can be written in a more concise manner by merging the prolog and epilog of the loop with the loop itself as follows:
template <size_t stages_count = 2 /* Pipeline with stages_count stages */>
__global__ void with_staging_unified(int* global_out, int const* global_in, size_t size, size_t batch_sz) {
auto grid = cooperative_groups::this_grid();
auto block = cooperative_groups::this_thread_block();
assert(size == batch_sz * grid.size()); // Assume input size fits batch_sz * grid_size
extern __shared__ int shared[]; // stages_count * block.size() * sizeof(int) bytes
size_t shared_offset[stages_count];
for (int s = 0; s < stages_count; ++s) shared_offset[s] = s * block.size();
__shared__ cuda::pipeline_shared_state<
cuda::thread_scope::thread_scope_block,
stages_count
> shared_state;
auto pipeline = cuda::make_pipeline(block, &shared_state);
auto block_batch = [&](size_t batch) -> int {
return block.group_index().x * block.size() + grid.size() * batch;
};
// compute_batch: next batch to process
// fetch_batch: next batch to fetch from global memory
for (size_t compute_batch = 0, fetch_batch = 0; compute_batch < batch_sz; ++compute_batch) {
// The outer loop iterates over the computation of the batches
for (; fetch_batch < batch_sz && fetch_batch < (compute_batch + stages_count); ++fetch_batch) {
// This inner loop iterates over the memory transfers, making sure that the pipeline is always full
pipeline.producer_acquire();
size_t shared_idx = fetch_batch % stages_count;
size_t batch_idx = fetch_batch;
size_t block_batch_idx = block_batch(batch_idx);
cuda::memcpy_async(block, shared + shared_offset[shared_idx], global_in + block_batch_idx, sizeof(int) * block.size(), pipeline);
pipeline.producer_commit();
}
pipeline.consumer_wait();
int shared_idx = compute_batch % stages_count;
int batch_idx = compute_batch;
compute(global_out + block_batch(batch_idx), shared + shared_offset[shared_idx]);
pipeline.consumer_release();
}
}
The pipeline<thread_scope_block> primitive used above is very flexible, and supports two features that our examples above are not using: any arbitrary subset of threads in the block can participate in the pipeline, and from the threads that participate, any subsets can be producers, consumers, or both. In the following example, threads with an “even” thread rank are producers, while other threads are consumers:
__device__ void compute(int* global_out, int shared_in);
template <size_t stages_count = 2>
__global__ void with_specialized_staging_unified(int* global_out, int const* global_in, size_t size, size_t batch_sz) {
auto grid = cooperative_groups::this_grid();
auto block = cooperative_groups::this_thread_block();
// In this example, threads with "even" thread rank are producers, while threads with "odd" thread rank are consumers:
const cuda::pipeline_role thread_role
= block.thread_rank() % 2 == 0? cuda::pipeline_role::producer : cuda::pipeline_role::consumer;
// Each thread block only has half of its threads as producers:
auto producer_threads = block.size() / 2;
// Map adjacent even and odd threads to the same id:
const int thread_idx = block.thread_rank() / 2;
auto elements_per_batch = size / batch_sz;
auto elements_per_batch_per_block = elements_per_batch / grid.group_dim().x;
extern __shared__ int shared[]; // stages_count * elements_per_batch_per_block * sizeof(int) bytes
size_t shared_offset[stages_count];
for (int s = 0; s < stages_count; ++s) shared_offset[s] = s * elements_per_batch_per_block;
__shared__ cuda::pipeline_shared_state<
cuda::thread_scope::thread_scope_block,
stages_count
> shared_state;
cuda::pipeline pipeline = cuda::make_pipeline(block, &shared_state, thread_role);
// Each thread block processes `batch_sz` batches.
// Compute offset of the batch `batch` of this thread block in global memory:
auto block_batch = [&](size_t batch) -> int {
return elements_per_batch * batch + elements_per_batch_per_block * blockIdx.x;
};
for (size_t compute_batch = 0, fetch_batch = 0; compute_batch < batch_sz; ++compute_batch) {
// The outer loop iterates over the computation of the batches
for (; fetch_batch < batch_sz && fetch_batch < (compute_batch + stages_count); ++fetch_batch) {
// This inner loop iterates over the memory transfers, making sure that the pipeline is always full
if (thread_role == cuda::pipeline_role::producer) {
// Only the producer threads schedule asynchronous memcpys:
pipeline.producer_acquire();
size_t shared_idx = fetch_batch % stages_count;
size_t batch_idx = fetch_batch;
size_t global_batch_idx = block_batch(batch_idx) + thread_idx;
size_t shared_batch_idx = shared_offset[shared_idx] + thread_idx;
cuda::memcpy_async(shared + shared_batch_idx, global_in + global_batch_idx, sizeof(int), pipeline);
pipeline.producer_commit();
}
}
if (thread_role == cuda::pipeline_role::consumer) {
// Only the consumer threads compute:
pipeline.consumer_wait();
size_t shared_idx = compute_batch % stages_count;
size_t global_batch_idx = block_batch(compute_batch) + thread_idx;
size_t shared_batch_idx = shared_offset[shared_idx] + thread_idx;
compute(global_out + global_batch_idx, *(shared + shared_batch_idx));
pipeline.consumer_release();
}
}
}
There are some optimizations that pipeline performs, for example, when all threads are both producers and consumers, but in general, the cost of supporting all these features cannot be fully eliminated. For example, pipeline stores and uses a set of barriers in shared memory for synchronization, which is not really necessary if all threads in the block participate in the pipeline.
For the particular case in which all threads in the block participate in the pipeline, we can do better than pipeline<thread_scope_block> by using a pipeline<thread_scope_thread> combined with __syncthreads():
template<size_t stages_count>
__global__ void with_staging_scope_thread(int* global_out, int const* global_in, size_t size, size_t batch_sz) {
auto grid = cooperative_groups::this_grid();
auto block = cooperative_groups::this_thread_block();
auto thread = cooperative_groups::this_thread();
assert(size == batch_sz * grid.size()); // Assume input size fits batch_sz * grid_size
extern __shared__ int shared[]; // stages_count * block.size() * sizeof(int) bytes
size_t shared_offset[stages_count];
for (int s = 0; s < stages_count; ++s) shared_offset[s] = s * block.size();
// No pipeline::shared_state needed
cuda::pipeline<cuda::thread_scope_thread> pipeline = cuda::make_pipeline();
auto block_batch = [&](size_t batch) -> int {
return block.group_index().x * block.size() + grid.size() * batch;
};
for (size_t compute_batch = 0, fetch_batch = 0; compute_batch < batch_sz; ++compute_batch) {
for (; fetch_batch < batch_sz && fetch_batch < (compute_batch + stages_count); ++fetch_batch) {
pipeline.producer_acquire();
size_t shared_idx = fetch_batch % stages_count;
size_t batch_idx = fetch_batch;
// Each thread fetches its own data:
size_t thread_batch_idx = block_batch(batch_idx) + threadIdx.x;
// The copy is performed by a single `thread` and the size of the batch is now that of a single element:
cuda::memcpy_async(thread, shared + shared_offset[shared_idx] + threadIdx.x, global_in + thread_batch_idx, sizeof(int), pipeline);
pipeline.producer_commit();
}
pipeline.consumer_wait();
block.sync(); // __syncthreads: All memcpy_async of all threads in the block for this stage have completed here
int shared_idx = compute_batch % stages_count;
int batch_idx = compute_batch;
compute(global_out + block_batch(batch_idx), shared + shared_offset[shared_idx]);
pipeline.consumer_release();
}
}
If the compute operation only reads shared memory written to by other threads in the same warp as the current thread, __syncwarp() suffices.
7.28.3. Pipeline Interface
The complete API documentation for cuda::memcpy_async is provided in the libcudacxx API documentation along with some examples.
The pipeline interface requires
at least CUDA 11.0,
at least ISO C++ 2011 compatibility, e.g., to be compiled with
-std=c++11, and#include <cuda/pipeline>.
For a C-like interface, when compiling without ISO C++ 2011 compatibility, see Pipeline Primitives Interface.
7.28.4. Pipeline Primitives Interface
Pipeline primitives are a C-like interface for memcpy_async functionality. The pipeline primitives interface is available by including the <cuda_pipeline.h> header. When compiling without ISO C++ 2011 compatibility, include the <cuda_pipeline_primitives.h> header.
7.28.4.1. memcpy_async Primitive
void __pipeline_memcpy_async(void* __restrict__ dst_shared,
const void* __restrict__ src_global,
size_t size_and_align,
size_t zfill=0);
-
Request that the following operation be submitted for asynchronous evaluation:
size_t i = 0; for (; i < size_and_align - zfill; ++i) ((char*)dst_shared)[i] = ((char*)src_global)[i]; /* copy */ for (; i < size_and_align; ++i) ((char*)dst_shared)[i] = 0; /* zero-fill */
-
Requirements:
dst_sharedmust be a pointer to the shared memory destination for thememcpy_async.src_globalmust be a pointer to the global memory source for thememcpy_async.size_and_alignmust be 4, 8, or 16.zfill <= size_and_align.size_and_alignmust be the alignment ofdst_sharedandsrc_global.
-
It is a race condition for any thread to modify the source memory or observe the destination memory prior to waiting for the
memcpy_asyncoperation to complete. Between submitting amemcpy_asyncoperation and waiting for its completion, any of the following actions introduces a race condition:Loading from
dst_shared.Storing to
dst_sharedorsrc_global.Applying an atomic update to
dst_sharedorsrc_global.
7.28.4.2. Commit Primitive
void __pipeline_commit();
Commit submitted
memcpy_asyncto the pipeline as the current batch.
7.28.4.3. Wait Primitive
void __pipeline_wait_prior(size_t N);
Let
{0, 1, 2, ..., L}be the sequence of indices associated with invocations of__pipeline_commit()by a given thread.Wait for completion of batches at least up to and including
L-N.
7.28.4.4. Arrive On Barrier Primitive
void __pipeline_arrive_on(__mbarrier_t* bar);
barpoints to a barrier in shared memory.Increments the barrier arrival count by one, when all memcpy_async operations sequenced before this call have completed, the arrival count is decremented by one and hence the net effect on the arrival count is zero. It is user’s responsibility to make sure that the increment on the arrival count does not exceed
__mbarrier_maximum_count().
7.29. Asynchronous Data Copies using the Tensor Memory Accelerator (TMA)
Many applications require movement of large amounts of data from and to global memory. Often, the data is laid out in global memory as a multi-dimensional array with non-sequential data acess patterns. To reduce global memory usage, sub-tiles of such arrays are copied to shared memory before use in computations. The loading and storing involves address-calculations that can be error-prone and repetitive. To offload these computations, Compute Capability 9.0 introduces the Tensor Memory Accelerator (TMA). The primary goal of TMA is to provide an efficient data transfer mechanism from global memory to shared memory for multi-dimensional arrays.
Naming. Tensor memory accelerator (TMA) is a broad term used to market the features described in this section. For the purpose of forward-compatibility and to reduce discrepancies with the PTX ISA, the text in this section refers to TMA operations as either bulk-asynchronous copies or bulk tensor asynchronous copies, depending on the specific type of copy used. The term “bulk” is used to contrast these operations with the asynchronous memory operations described in the previous sections.
Dimensions. TMA supports copying both one-dimensional and multi-dimensional
arrays (up to 5-dimensional). The programming model for bulk-asynchronous
copies of one-dimensional contiguous arrays is different from the programming
model for bulk tensor asynchronous copies of multi-dimensional arrays. To
perform a bulk tensor asynchronous copy of a multi-dimensional array, the
hardware requires a tensor map.
This object describes the layout of the multi-dimensional array in global and
shared memory. A tensor map is typically created on the host using the cuTensorMapEncode
API
and then transferred from host to device as a const kernel parameter annotated
with __grid_constant__.
The tensor map is transferred from host to device as a const kernel
parameter annotated with __grid_constant__, and can be used on the device to
copy a tile of data between shared and global memory. In contrast, performing a
bulk-asynchronous copy of a contiguous one-dimensional array does not require a
tensor map: it can be performed on-device with a pointer and size parameter.
Source and destination. The source and destination addresses of bulk-asynchronous copy
operations can be in shared or global memory. The operations can read data from global to
shared memory, write data from shared to global memory, and also copy from
shared memory to Distributed Shared Memory of another block in the same cluster.
In addition, when in a cluster, a bulk-asynchronous operation can be specified as being
multicast. In this case, data can be transferred from global memory to the
shared memory of multiple blocks within the cluster. The multicast feature is
optimized for target architecture sm_90a and may have significantly reduced performance on
other targets. Hence, it is advised to be used with compute architecture
sm_90a.
Asynchronous. Data transfers using TMA are asynchronous. This allows the initiating thread to continue computing while the hardware asynchronously copies the data. Whether the data transfer occurs asynchronously in practice is up to the hardware implementation and may change in the future. There are several completion mechanisms that bulk-asynchronous operations can use to signal that they have completed. When the operation reads from global to shared memory, any thread in the block can wait for the data to be readable in shared memory by waiting on a Shared Memory Barrier. When the bulk-asynchronous operation writes data from shared memory to global or distributed shared memory, only the initiating thread can wait for the operation to have completed. This is accomplished using a bulk async-group based completion mechanism. A table describing the completion mechanisms can be found below and in the PTX ISA.
Direction |
Completion mechanism |
||
|---|---|---|---|
Destination |
Source |
Asychronous copy |
Bulk-asynchronous copy (TMA) |
Global |
Global |
||
Global |
Shared::cta |
Bulk async-group |
|
Shared::cta |
Global |
Async-group, mbarrier |
Mbarrier |
Shared::cluster |
Global |
Mbarrier (multicast) |
|
Shared::cta |
Shared::cluster |
Mbarrier |
|
Shared::cta |
Shared::cta |
||
7.29.1. Using TMA to transfer one-dimensional arrays
This section demonstrates how to write a simple kernel that read-modify-writes a one-dimensional array using TMA. This shows how to how to load and store data using bulk-asynchronous copies, as well as how to synchronize threads of execution with those copies.
The code of the kernel is included below. Some functionality requires inline PTX assembly that is currently made available through libcu++. The availability of these wrappers can be checked with the following code:
#if defined(__CUDA_MINIMUM_ARCH__) && __CUDA_MINIMUM_ARCH__ < 900
static_assert(false, "Device code is being compiled with older architectures that are incompatible with TMA.");
#endif // __CUDA_MINIMUM_ARCH__
The kernel goes through the following stages:
Initialize shared memory barrier.
Initiate bulk-asynchronous copy of a block of memory from global to shared memory.
Arrive and wait on the shared memory barrier.
Increment the shared memory buffer values.
Wait for shared memory writes to be visible to the subsequent bulk-asynchronous copy, i.e., order the shared memory writes in the async proxy before the next step.
Initiate bulk-asynchronous copy of the buffer in shared memory to global memory.
Wait at end of kernel for bulk-asynchronous copy to have finished reading shared memory.
#include <cuda/barrier>
#include <cuda/ptx>
using barrier = cuda::barrier<cuda::thread_scope_block>;
namespace ptx = cuda::ptx;
static constexpr size_t buf_len = 1024;
__global__ void add_one_kernel(int* data, size_t offset)
{
// Shared memory buffer. The destination shared memory buffer of
// a bulk operations should be 16 byte aligned.
__shared__ alignas(16) int smem_data[buf_len];
// 1. a) Initialize shared memory barrier with the number of threads participating in the barrier.
// b) Make initialized barrier visible in async proxy.
#pragma nv_diag_suppress static_var_with_dynamic_init
__shared__ barrier bar;
if (threadIdx.x == 0) {
init(&bar, blockDim.x); // a)
ptx::fence_proxy_async(ptx::space_shared); // b)
}
__syncthreads();
// 2. Initiate TMA transfer to copy global to shared memory.
if (threadIdx.x == 0) {
// 3a. cuda::memcpy_async arrives on the barrier and communicates
// how many bytes are expected to come in (the transaction count)
cuda::memcpy_async(
smem_data,
data + offset,
cuda::aligned_size_t<16>(sizeof(smem_data)),
bar
);
}
// 3b. All threads arrive on the barrier
barrier::arrival_token token = bar.arrive();
// 3c. Wait for the data to have arrived.
bar.wait(std::move(token));
// 4. Compute saxpy and write back to shared memory
for (int i = threadIdx.x; i < buf_len; i += blockDim.x) {
smem_data[i] += 1;
}
// 5. Wait for shared memory writes to be visible to TMA engine.
ptx::fence_proxy_async(ptx::space_shared); // b)
__syncthreads();
// After syncthreads, writes by all threads are visible to TMA engine.
// 6. Initiate TMA transfer to copy shared memory to global memory
if (threadIdx.x == 0) {
ptx::cp_async_bulk(
ptx::space_global,
ptx::space_shared,
data + offset, smem_data, sizeof(smem_data));
// 7. Wait for TMA transfer to have finished reading shared memory.
// Create a "bulk async-group" out of the previous bulk copy operation.
ptx::cp_async_bulk_commit_group();
// Wait for the group to have completed reading from shared memory.
ptx::cp_async_bulk_wait_group_read(ptx::n32_t<0>());
}
}
Barrier initialization. The barrier is initialized with the number of
threads participating in the block. As a result, the barrier will flip only if
all threads have arrived on this barrier. Shared memory barriers are described
in more detail in Asynchronous Data Copies using cuda::barrier.
To make the initialized barrier visible to subsequent bulk-asynchronous copies, the
fence.proxy.async.shared::cta instruction is used. This instruction ensures that
subsequent bulk-asynchronous copy operations operate on the initialized barrier.
TMA read. The bulk-asynchronous copy instruction directs the hardware to copy a large chunk of data into shared memory, and to update the transaction count of the shared memory barrier after completing the read. In general, issuing as few bulk copies with as big a size as possible results in the best performance. Because the copy can be performed asynchronously by the hardware, it is not necessary to split the copy into smaller chunks.
The thread that initiates the bulk-asynchronous copy operation arrives at the barrier
using mbarrier.expect_tx. This is automatically performed by cuda::memcpy_async. This tells the barrier that the thread has
arrived and also how many bytes (tx / transactions) are expected to arrive. Only
a single thread has to update the expected transaction count. If multiple
threads update the transaction count, the expected transaction will be the sum
of the updates. The barrier will only flip once all threads have arrived and
all bytes have arrived. Once the barrier has flipped, the bytes are safe to read
from shared memory, both by the threads as well as by subsequent
bulk-asynchronous copies. More information about barrier transaction accounting
can be found in the PTX ISA.
Barrier wait. Waiting for the barrier to flip is done using
mbarrier.try_wait. It can either return true, indicating that the wait is
over, or return false, which may mean that the wait timed out. The while loop
waits for completion, and retries on time-out.
SMEM write and sync. The increment of the buffer values reads and writes to shared
memory. To make the writes visible to subsequent bulk-asynchronous copies, the
fence.proxy.async.shared::cta instruction is used. This orders the writes to
shared memory before subsequent reads from bulk-asynchronous copy operations,
which read through the async proxy. So each thread first orders the writes to
objects in shared memory in the async proxy via the
fence.proxy.async.shared::cta, and these operations by all threads are
ordered before the async operation performed in thread 0 using
__syncthreads().
TMA write and sync. The write from shared to global memory is again
initiated by a single thread. The completion of the write is not tracked by a
shared memory barrier. Instead, a thread-local mechanism is used. Multiple
writes can be batched into a so-called bulk async-group. Afterwards, the
thread can wait for all operations in this group to have completed reading from
shared memory (as in the code above) or to have completed writing to global
memory, making the writes visible to the initiating thread. For more information,
refer to the PTX ISA documentation of cp.async.bulk.wait_group.
Note that the bulk-asynchronous and non-bulk asynchronous copy instructions have
different async-groups: there exist both cp.async.wait_group and
cp.async.bulk.wait_group instructions.
The bulk-asynchronous instructions have specific alignment requirements on their source and destination addresses. More information can be found in the table below.
Address / Size |
Alignment |
|---|---|
Global memory address |
Must be 16 byte aligned. |
Shared memory address |
Must be 16 byte aligned. |
Shared memory barrier address |
Must be 8 byte aligned (this is guaranteed by |
Size of transfer |
Must be a multiple of 16 bytes. |
7.29.2. Using TMA to transfer multi-dimensional arrays
The primary difference between the one-dimensional and multi-dimensional case is that a tensor map must be created on the host and passed to the CUDA kernel. This section describes how to create a tensor map using the CUDA driver API, how to pass it to device, and how to use it on device.
Driver API. A tensor map is created using the cuTensorMapEncodeTiled
driver API. This API can be accessed by linking to the driver directly
(-lcuda) or by using the cudaGetDriverEntryPoint
API. Below, we show how to get a pointer to the cuTensorMapEncodeTiled API.
For more information, refer to Driver Entry Point Access.
#include <cudaTypedefs.h> // PFN_cuTensorMapEncodeTiled, CUtensorMap
PFN_cuTensorMapEncodeTiled_v12000 get_cuTensorMapEncodeTiled() {
// Get pointer to cuTensorMapEncodeTiled
cudaDriverEntryPointQueryResult driver_status;
void* cuTensorMapEncodeTiled_ptr = nullptr;
CUDA_CHECK(cudaGetDriverEntryPointByVersion("cuTensorMapEncodeTiled", &cuTensorMapEncodeTiled_ptr, 12000, cudaEnableDefault, &driver_status));
assert(driver_status == cudaDriverEntryPointSuccess);
return reinterpret_cast<PFN_cuTensorMapEncodeTiled_v12000>(cuTensorMapEncodeTiled_ptr);
}
Creation. Creating a tensor map requires many parameters. Among
them are the base pointer to an array in global memory, the size of the array
(in number of elements), the stride from one row to the next (in bytes), the
size of the shared memory buffer (in number of elements). The code below creates
a tensor map to describe a two-dimensional row-major array of size GMEM_HEIGHT
x GMEM_WIDTH. Note the order of the parameters: the fastest moving dimension
comes first.
CUtensorMap tensor_map{};
// rank is the number of dimensions of the array.
constexpr uint32_t rank = 2;
uint64_t size[rank] = {GMEM_WIDTH, GMEM_HEIGHT};
// The stride is the number of bytes to traverse from the first element of one row to the next.
// It must be a multiple of 16.
uint64_t stride[rank - 1] = {GMEM_WIDTH * sizeof(int)};
// The box_size is the size of the shared memory buffer that is used as the
// destination of a TMA transfer.
uint32_t box_size[rank] = {SMEM_WIDTH, SMEM_HEIGHT};
// The distance between elements in units of sizeof(element). A stride of 2
// can be used to load only the real component of a complex-valued tensor, for instance.
uint32_t elem_stride[rank] = {1, 1};
// Get a function pointer to the cuTensorMapEncodeTiled driver API.
auto cuTensorMapEncodeTiled = get_cuTensorMapEncodeTiled();
// Create the tensor descriptor.
CUresult res = cuTensorMapEncodeTiled(
&tensor_map, // CUtensorMap *tensorMap,
CUtensorMapDataType::CU_TENSOR_MAP_DATA_TYPE_INT32,
rank, // cuuint32_t tensorRank,
tensor_ptr, // void *globalAddress,
size, // const cuuint64_t *globalDim,
stride, // const cuuint64_t *globalStrides,
box_size, // const cuuint32_t *boxDim,
elem_stride, // const cuuint32_t *elementStrides,
// Interleave patterns can be used to accelerate loading of values that
// are less than 4 bytes long.
CUtensorMapInterleave::CU_TENSOR_MAP_INTERLEAVE_NONE,
// Swizzling can be used to avoid shared memory bank conflicts.
CUtensorMapSwizzle::CU_TENSOR_MAP_SWIZZLE_NONE,
// L2 Promotion can be used to widen the effect of a cache-policy to a wider
// set of L2 cache lines.
CUtensorMapL2promotion::CU_TENSOR_MAP_L2_PROMOTION_NONE,
// Any element that is outside of bounds will be set to zero by the TMA transfer.
CUtensorMapFloatOOBfill::CU_TENSOR_MAP_FLOAT_OOB_FILL_NONE
);
Host-to-device transfer. There are three ways to make a tensor map accessible to
device code. The recommended approach is to pass the tensor map as a const __grid_constant__
parameter to a kernel. The other possibilities are copying the tensor map into device __constant__
memory using cudaMemcpyToSymbol or accessing it via global memory. When passing the tensor map as a parameter, some versions of the
GCC C++ compiler issue the warning “the ABI for passing parameters with 64-byte
alignment has changed in GCC 4.6”. This warning can be ignored.
#include <cuda.h>
__global__ void kernel(const __grid_constant__ CUtensorMap tensor_map)
{
// Use tensor_map here.
}
int main() {
CUtensorMap map;
// [ ..Initialize map.. ]
kernel<<<1, 1>>>(map);
}
As an alternative to the __grid_constant__ kernel parameter, a global
constant variable can be used. An example is included
below.
#include <cuda.h>
__constant__ CUtensorMap global_tensor_map;
__global__ void kernel()
{
// Use global_tensor_map here.
}
int main() {
CUtensorMap local_tensor_map;
// [ ..Initialize map.. ]
cudaMemcpyToSymbol(global_tensor_map, &local_tensor_map, sizeof(CUtensorMap));
kernel<<<1, 1>>>();
}
Finally, it is possible to copy the tensor map to global memory. Using a pointer to a tensor map in global device memory requires a fence ineach thread block before any thread in the block uses the updated tensormap. Further uses of the tensormap by that thread block do not need to be fenced unless the tensormap is modified again. Note that this mechanism may be slower than the two mechanisms described above.
#include <cuda.h>
#include <cuda/ptx>
namespace ptx = cuda::ptx;
__device__ CUtensorMap global_tensor_map;
__global__ void kernel(CUtensorMap *tensor_map)
{
// Fence acquire tensormap:
ptx::n32_t<128> size_bytes;
// Since the tensormap was modified from the host using cudaMemcpy,
// the scope should be .sys.
ptx::fence_proxy_tensormap_generic(
bptx::sem_acquire, ptx::scope_sys, tensor_map, size_bytes
);
// Safe to use tensor_map after fence inside this thread..
}
int main() {
CUtensorMap local_tensor_map;
// [ ..Initialize map.. ]
ccudaMemcpy(&global_tensor_map, &local_tensor_map, sizeof(CUtensorMap), cudaMemcpyHostToDevice);
kernel<<<1, 1>>>(global_tensor_map);
}
Use. The kernel below loads a 2D tile of size SMEM_HEIGHT x SMEM_WIDTH
from a larger 2D array. The top-left corner of the tile is indicated by the
indices x and y. The tile is loaded into shared memory, modified, and
written back to global memory.
#include <cuda.h> // CUtensormap
#include <cuda/barrier>
using barrier = cuda::barrier<cuda::thread_scope_block>;
namespace cde = cuda::device::experimental;
__global__ void kernel(const __grid_constant__ CUtensorMap tensor_map, int x, int y) {
// The destination shared memory buffer of a bulk tensor operation should be
// 128 byte aligned.
__shared__ alignas(128) int smem_buffer[SMEM_HEIGHT][SMEM_WIDTH];
// Initialize shared memory barrier with the number of threads participating in the barrier.
#pragma nv_diag_suppress static_var_with_dynamic_init
__shared__ barrier bar;
if (threadIdx.x == 0) {
// Initialize barrier. All `blockDim.x` threads in block participate.
init(&bar, blockDim.x);
// Make initialized barrier visible in async proxy.
cde::fence_proxy_async_shared_cta();
}
// Syncthreads so initialized barrier is visible to all threads.
__syncthreads();
barrier::arrival_token token;
if (threadIdx.x == 0) {
// Initiate bulk tensor copy.
cde::cp_async_bulk_tensor_2d_global_to_shared(&smem_buffer, &tensor_map, x, y, bar);
// Arrive on the barrier and tell how many bytes are expected to come in.
token = cuda::device::barrier_arrive_tx(bar, 1, sizeof(smem_buffer));
} else {
// Other threads just arrive.
token = bar.arrive();
}
// Wait for the data to have arrived.
bar.wait(std::move(token));
// Symbolically modify a value in shared memory.
smem_buffer[0][threadIdx.x] += threadIdx.x;
// Wait for shared memory writes to be visible to TMA engine.
cde::fence_proxy_async_shared_cta();
__syncthreads();
// After syncthreads, writes by all threads are visible to TMA engine.
// Initiate TMA transfer to copy shared memory to global memory
if (threadIdx.x == 0) {
cde::cp_async_bulk_tensor_2d_shared_to_global(&tensor_map, x, y, &smem_buffer);
// Wait for TMA transfer to have finished reading shared memory.
// Create a "bulk async-group" out of the previous bulk copy operation.
cde::cp_async_bulk_commit_group();
// Wait for the group to have completed reading from shared memory.
cde::cp_async_bulk_wait_group_read<0>();
}
// Destroy barrier. This invalidates the memory region of the barrier. If
// further computations were to take place in the kernel, this allows the
// memory location of the shared memory barrier to be reused.
if (threadIdx.x == 0) {
(&bar)->~barrier();
}
}
Negative indices and out of bounds. When part of the tile that is being read from global to shared memory is out of bounds, the shared memory that corresponds to the out of bounds area is zero-filled. The top-left corner indices of the tile may also be negative. When writing from shared to global memory, parts of the tile may be out of bounds, but the top left corner cannot have any negative indices.
Size and stride. The size of a tensor is the number of elements along one dimension. All sizes must be greater than one. The stride is the number of bytes between elements of the same dimension. For instance, a 4 x 4 matrix of integers has sizes 4 and 4. Since it has 4 bytes per element, the strides are 4 and 16 bytes. Due to alignment requirements, a 4 x 3 row-major matrix of integers must have strides of 4 and 16 bytes as well. Each row is padded with 4 extra bytes to ensure that the start of the next row is aligned to 16 bytes. For more information regarding alignment, refer to Table Alignment requirements for multi-dimensional bulk tensor asynchronous copy operations in Compute Capability 9.0..
Address / Size |
Alignment |
|---|---|
Global memory address |
Must be 16 byte aligned. |
Global memory sizes |
Must be greater than or equal to one. Does not have to be a multiple of 16 bytes. |
Global memory strides |
Must be multiples of 16 bytes. |
Shared memory address |
Must be 128 byte aligned. |
Shared memory barrier address |
Must be 8 byte aligned (this is guaranteed by |
Size of transfer |
Must be a multiple of 16 bytes. |
7.29.2.1. Multi-dimensional TMA PTX wrappers
Below, the PTX instructions are ordered by their use in the example code above.
The cp.async.bulk.tensor instructions initiate a bulk tensor asynchronous copy between global and shared memory. The wrappers below read from global to shared memory and write from shared to global memory.
// https://docs.nvidia.com/cuda/parallel-thread-execution/index.html#data-movement-and-conversion-instructions-cp-async-bulk-tensor
inline __device__
void cuda::device::experimental::cp_async_bulk_tensor_1d_global_to_shared(
void *dest, const CUtensorMap *tensor_map , int c0, cuda::barrier<cuda::thread_scope_block> &bar
);
// https://docs.nvidia.com/cuda/parallel-thread-execution/index.html#data-movement-and-conversion-instructions-cp-async-bulk-tensor
inline __device__
void cuda::device::experimental::cp_async_bulk_tensor_2d_global_to_shared(
void *dest, const CUtensorMap *tensor_map , int c0, int c1, cuda::barrier<cuda::thread_scope_block> &bar
);
// https://docs.nvidia.com/cuda/parallel-thread-execution/index.html#data-movement-and-conversion-instructions-cp-async-bulk-tensor
inline __device__
void cuda::device::experimental::cp_async_bulk_tensor_3d_global_to_shared(
void *dest, const CUtensorMap *tensor_map, int c0, int c1, int c2, cuda::barrier<cuda::thread_scope_block> &bar
);
// https://docs.nvidia.com/cuda/parallel-thread-execution/index.html#data-movement-and-conversion-instructions-cp-async-bulk-tensor
inline __device__
void cuda::device::experimental::cp_async_bulk_tensor_4d_global_to_shared(
void *dest, const CUtensorMap *tensor_map , int c0, int c1, int c2, int c3, cuda::barrier<cuda::thread_scope_block> &bar
);
// https://docs.nvidia.com/cuda/parallel-thread-execution/index.html#data-movement-and-conversion-instructions-cp-async-bulk-tensor
inline __device__
void cuda::device::experimental::cp_async_bulk_tensor_5d_global_to_shared(
void *dest, const CUtensorMap *tensor_map , int c0, int c1, int c2, int c3, int c4, cuda::barrier<cuda::thread_scope_block> &bar
);
// https://docs.nvidia.com/cuda/parallel-thread-execution/index.html#data-movement-and-conversion-instructions-cp-async-bulk-tensor
inline __device__
void cuda::device::experimental::cp_async_bulk_tensor_1d_shared_to_global(
const CUtensorMap *tensor_map, int c0, const void *src
);
// https://docs.nvidia.com/cuda/parallel-thread-execution/index.html#data-movement-and-conversion-instructions-cp-async-bulk-tensor
inline __device__
void cuda::device::experimental::cp_async_bulk_tensor_2d_shared_to_global(
const CUtensorMap *tensor_map, int c0, int c1, const void *src
);
// https://docs.nvidia.com/cuda/parallel-thread-execution/index.html#data-movement-and-conversion-instructions-cp-async-bulk-tensor
inline __device__
void cuda::device::experimental::cp_async_bulk_tensor_3d_shared_to_global(
const CUtensorMap *tensor_map, int c0, int c1, int c2, const void *src
);
// https://docs.nvidia.com/cuda/parallel-thread-execution/index.html#data-movement-and-conversion-instructions-cp-async-bulk-tensor
inline __device__
void cuda::device::experimental::cp_async_bulk_tensor_4d_shared_to_global(
const CUtensorMap *tensor_map, int c0, int c1, int c2, int c3, const void *src
);
// https://docs.nvidia.com/cuda/parallel-thread-execution/index.html#data-movement-and-conversion-instructions-cp-async-bulk-tensor
inline __device__
void cuda::device::experimental::cp_async_bulk_tensor_5d_shared_to_global(
const CUtensorMap *tensor_map, int c0, int c1, int c2, int c3, int c4, const void *src
);
7.30. Encoding a Tensor Map on Device
Previous sections have described how to create a tensor map on the host using the CUDA driver API.
This section explains how to encode a tiled-type tensor map on device. This is useful in situations where the typical
way of transferring the tensor map (using const __grid_constant__ kernel parameters) is undesirable, for instance,
when processing a batch of tensors of various sizes in a single kernel launch.
The recommended pattern is as follows:
Create a tensor map “template”,
template_tensor_map, using the Driver API on the host.In a device kernel, copy the
template_tensor_map, modify the copy, store in global memory, and appropriately fence.Use the tensor map in a kernel with appropriate fencing.
The high-level code structure is as follows:
// Initialize device context:
CUDA_CHECK(cudaDeviceSynchronize());
// Create a tensor map template using the cuTensorMapEncodeTiled driver function
CUtensorMap template_tensor_map = make_tensormap_template();
// Allocate tensor map and tensor in global memory
CUtensorMap* global_tensor_map;
CUDA_CHECK(cudaMalloc(&global_tensor_map, sizeof(CUtensorMap)));
char* global_buf;
CUDA_CHECK(cudaMalloc(&global_buf, 8 * 256));
// Fill global buffer with data.
fill_global_buf<<<1, 1>>>(global_buf);
// Define the parameters of the tensor map that will be created on device.
tensormap_params p{};
p.global_address = global_buf;
p.rank = 2;
p.box_dim[0] = 128; // The box in shared memory has half the width of the full buffer
p.box_dim[1] = 4; // The box in shared memory has half the height of the full buffer
p.global_dim[0] = 256; //
p.global_dim[1] = 8; //
p.global_stride[0] = 256; //
p.element_stride[0] = 1; //
p.element_stride[1] = 1; //
// Encode global_tensor_map on device:
encode_tensor_map<<<1, 32>>>(template_tensor_map, p, global_tensor_map);
// Use it from another kernel:
consume_tensor_map<<<1, 1>>>(global_tensor_map);
// Check for errors:
CUDA_CHECK(cudaDeviceSynchronize());
The following sections describe the high-level steps. Throughout the examples, the following tensormap_params
struct contains the new values of the fields to be updated. It is included here to reference when reading the examples.
struct tensormap_params {
void* global_address;
int rank;
uint32_t box_dim[5];
uint64_t global_dim[5];
size_t global_stride[4];
uint32_t element_stride[5];
};
7.30.1. Device-side Encoding and Modification of a Tensor Map
The recommended process of encoding a tensor map in global memory proceeds as follows.
Pass an existing tensor map, the
template_tensor_map, to the kernel. In contrast to kernels that use the tensor map in acp.async.bulk.tensorinstruction, this may be done in any way: a pointer to global memory, kernel parameter, a__const___variable, and so on.Copy-initialize a tensor map in shared memory with the template_tensor_map value.
Modify the tensor map in shared memory using the cuda::ptx::tensormap_replace functions. These functions wrap the tensormap.replace PTX instruction, which can be used to modify any field of a tiled-type tensor map, including the base address, size, stride, and so on.
Using the cuda::ptx::tensormap_copy_fenceproxy function, copy the modified tensor map from shared memory to global memory and perform any necessary fencing.
The following code contains a kernel that follows these steps. For completeness, it modifies all the fields of the tensor map. Typically, a kernel will modify just a few fields.
In this kernel, template_tensor_map is passed as a kernel parameter. This is the preferred way of moving template_tensor_map
from the host to the device. If the kernel is intended to update an existing tensor map in device memory, it can take a
pointer to the existing tensor map to modify.
Note
The format of the tensor map may change over time. Therefore, the cuda::ptx::tensormap_replace
functions and corresponding tensormap.replace.tile
PTX instructions are marked as specific to sm_90a. To use them, compile using nvcc -arch sm_90a .....
Tip
On sm_90a, a zero-initialized buffer in shared memory may also be used as the initial tensor map value. This
enables encoding a tensor map purely on device, without using the driver API to encode the template_tensor_map value.
Note
On-device modification is only supported for tiled-type tensor maps; other tensor map types cannot be modified on device. For more information on the tensor map types, refer to the Driver API reference.
#include <cuda/ptx>
namespace ptx = cuda::ptx;
// launch with 1 warp.
__launch_bounds__(32)
__global__ void encode_tensor_map(const __grid_constant__ CUtensorMap template_tensor_map, tensormap_params p, CUtensorMap* out) {
__shared__ alignas(128) CUtensorMap smem_tmap;
if (threadIdx.x == 0) {
// Copy template to shared memory:
smem_tmap = template_tensor_map;
const auto space_shared = ptx::space_shared;
ptx::tensormap_replace_global_address(space_shared, &smem_tmap, p.global_address);
// For field .rank, the operand new_val must be ones less than the desired
// tensor rank as this field uses zero-based numbering.
ptx::tensormap_replace_rank(space_shared, &smem_tmap, p.rank - 1);
// Set box dimensions:
if (0 < p.rank) { ptx::tensormap_replace_box_dim(space_shared, &smem_tmap, ptx::n32_t<0>{}, p.box_dim[0]); }
if (1 < p.rank) { ptx::tensormap_replace_box_dim(space_shared, &smem_tmap, ptx::n32_t<1>{}, p.box_dim[1]); }
if (2 < p.rank) { ptx::tensormap_replace_box_dim(space_shared, &smem_tmap, ptx::n32_t<2>{}, p.box_dim[2]); }
if (3 < p.rank) { ptx::tensormap_replace_box_dim(space_shared, &smem_tmap, ptx::n32_t<3>{}, p.box_dim[3]); }
if (4 < p.rank) { ptx::tensormap_replace_box_dim(space_shared, &smem_tmap, ptx::n32_t<4>{}, p.box_dim[4]); }
// Set global dimensions:
if (0 < p.rank) { ptx::tensormap_replace_global_dim(space_shared, &smem_tmap, ptx::n32_t<0>{}, (uint32_t) p.global_dim[0]); }
if (1 < p.rank) { ptx::tensormap_replace_global_dim(space_shared, &smem_tmap, ptx::n32_t<1>{}, (uint32_t) p.global_dim[1]); }
if (2 < p.rank) { ptx::tensormap_replace_global_dim(space_shared, &smem_tmap, ptx::n32_t<2>{}, (uint32_t) p.global_dim[2]); }
if (3 < p.rank) { ptx::tensormap_replace_global_dim(space_shared, &smem_tmap, ptx::n32_t<3>{}, (uint32_t) p.global_dim[3]); }
if (4 < p.rank) { ptx::tensormap_replace_global_dim(space_shared, &smem_tmap, ptx::n32_t<4>{}, (uint32_t) p.global_dim[4]); }
// Set global stride:
if (1 < p.rank) { ptx::tensormap_replace_global_stride(space_shared, &smem_tmap, ptx::n32_t<0>{}, p.global_stride[0]); }
if (2 < p.rank) { ptx::tensormap_replace_global_stride(space_shared, &smem_tmap, ptx::n32_t<1>{}, p.global_stride[1]); }
if (3 < p.rank) { ptx::tensormap_replace_global_stride(space_shared, &smem_tmap, ptx::n32_t<2>{}, p.global_stride[2]); }
if (4 < p.rank) { ptx::tensormap_replace_global_stride(space_shared, &smem_tmap, ptx::n32_t<3>{}, p.global_stride[3]); }
// Set element stride:
if (0 < p.rank) { ptx::tensormap_replace_element_size(space_shared, &smem_tmap, ptx::n32_t<0>{}, p.element_stride[0]); }
if (1 < p.rank) { ptx::tensormap_replace_element_size(space_shared, &smem_tmap, ptx::n32_t<1>{}, p.element_stride[1]); }
if (2 < p.rank) { ptx::tensormap_replace_element_size(space_shared, &smem_tmap, ptx::n32_t<2>{}, p.element_stride[2]); }
if (3 < p.rank) { ptx::tensormap_replace_element_size(space_shared, &smem_tmap, ptx::n32_t<3>{}, p.element_stride[3]); }
if (4 < p.rank) { ptx::tensormap_replace_element_size(space_shared, &smem_tmap, ptx::n32_t<4>{}, p.element_stride[4]); }
// These constants are documented in this table:
// https://docs.nvidia.com/cuda/parallel-thread-execution/index.html#tensormap-new-val-validity
auto u8_elem_type = ptx::n32_t<0>{};
ptx::tensormap_replace_elemtype(space_shared, &smem_tmap, u8_elem_type);
auto no_interleave = ptx::n32_t<0>{};
ptx::tensormap_replace_interleave_layout(space_shared, &smem_tmap, no_interleave);
auto no_swizzle = ptx::n32_t<0>{};
ptx::tensormap_replace_swizzle_mode(space_shared, &smem_tmap, no_swizzle);
auto zero_fill = ptx::n32_t<0>{};
ptx::tensormap_replace_fill_mode(space_shared, &smem_tmap, zero_fill);
}
// Synchronize the modifications with other threads in warp
__syncwarp();
// Copy the tensor map to global memory collectively with threads in the warp.
// In addition: make the updated tensor map visible to other threads on device that
// for use with cp.async.bulk.
ptx::n32_t<128> bytes_128;
ptx::tensormap_cp_fenceproxy(ptx::sem_release, ptx::scope_gpu, out, &smem_tmap, bytes_128);
}
7.30.2. Usage of a Modified Tensor Map
In contrast to using a tensor map that is passed as a const __grid_constant__ kernel parameter, using a tensor map in
global memory requires explicitly establishing a release-acquire pattern in the tensor map proxy between the threads
that modify the tensor map and the threads that use it.
The release part of the pattern was shown in the previous section. It is accomplished using the cuda::ptx::tensormap.cp_fenceproxy function.
The acquire part is accomplished using the cuda::ptx::fence_proxy_tensormap_generic
function that wraps the fence.proxy.tensormap::generic.acquire
instruction. If the two threads participating in the release-acquire pattern are on the same device, the .gpu scope suffices. If the threads are on
different devices, the .sys scope must be used. Once a tensor map has been acquired by one thread, it can be used by other threads in the block
after sufficient synchronization, for example, using __syncthreads(). The thread that uses the tensor map and the thread that performs the fence
must be in the same block. That is, if the threads are in, for example, two different thread blocks of the same cluster, the same grid, or a
different kernel, synchronization APIs such as cooperative_groups::cluster or grid_group::sync() or stream-order synchronization do not
suffice to establish ordering for tensor map updates, that is, threads in these other thread blocks still need to acquire the tensor map proxy
at the right scope before using the updated tensor map. If there are no intermediate modifications, the fence does not have to be repeated
before each cp.async.bulk.tensor instruction.
The fence and subsequent use of the tensor map is shown in the following example.
// Consumer of tensor map in global memory:
__global__ void consume_tensor_map(CUtensorMap* tensor_map) {
// Fence acquire tensor map:
ptx::n32_t<128> size_bytes;
ptx::fence_proxy_tensormap_generic(ptx::sem_acquire, ptx::scope_sys, tensor_map, size_bytes);
// Safe to use tensor_map after fence..
__shared__ uint64_t bar;
__shared__ alignas(128) char smem_buf[4][128];
if (threadIdx.x == 0) {
// Initialize barrier
ptx::mbarrier_init(&bar, 1);
// Make barrier init visible in async proxy, i.e., to TMA engine
ptx::fence_proxy_async(ptx::space_shared);
// Issue TMA request
ptx::cp_async_bulk_tensor(ptx::space_cluster, ptx::space_global, smem_buf, tensor_map, {0, 0}, &bar);
// Arrive on barrier. Expect 4 * 128 bytes.
ptx::mbarrier_arrive_expect_tx(ptx::sem_release, ptx::scope_cta, ptx::space_shared, &bar, sizeof(smem_buf));
}
const int parity = 0;
// Wait for load to have completed
while (!ptx::mbarrier_try_wait_parity(&bar, parity)) {}
// print items:
printf("Got:\n\n");
for (int j = 0; j < 4; ++j) {
for (int i = 0; i < 128; ++i) {
printf("%3d ", smem_buf[j][i]);
if (i % 32 == 31) { printf("\n"); };
}
printf("\n");
}
}
7.30.3. Creating a Template Tensor Map Value Using the Driver API
The following code creates a minimal tiled-type tensor map that can be subsequently modified on device.
CUtensorMap make_tensormap_template() {
CUtensorMap template_tensor_map{};
auto cuTensorMapEncodeTiled = get_cuTensorMapEncodeTiled();
uint32_t dims_32 = 16;
uint64_t dims_strides_64 = 16;
uint32_t elem_strides = 1;
// Create the tensor descriptor.
CUresult res = cuTensorMapEncodeTiled(
&template_tensor_map, // CUtensorMap *tensorMap,
CUtensorMapDataType::CU_TENSOR_MAP_DATA_TYPE_UINT8,
1, // cuuint32_t tensorRank,
nullptr, // void *globalAddress,
&dims_strides_64, // const cuuint64_t *globalDim,
&dims_strides_64, // const cuuint64_t *globalStrides,
&dims_32, // const cuuint32_t *boxDim,
&elem_strides, // const cuuint32_t *elementStrides,
CUtensorMapInterleave::CU_TENSOR_MAP_INTERLEAVE_NONE,
CUtensorMapSwizzle::CU_TENSOR_MAP_SWIZZLE_NONE,
CUtensorMapL2promotion::CU_TENSOR_MAP_L2_PROMOTION_NONE,
CUtensorMapFloatOOBfill::CU_TENSOR_MAP_FLOAT_OOB_FILL_NONE);
CU_CHECK(res);
return template_tensor_map;
}
7.31. Profiler Counter Function
Each multiprocessor has a set of sixteen hardware counters that an application can increment with a single instruction by calling the __prof_trigger() function.
void __prof_trigger(int counter);
increments by one per warp the per-multiprocessor hardware counter of index counter. Counters 8 to 15 are reserved and should not be used by applications.
The value of counters 0, 1, …, 7 can be obtained via nvprof by nvprof --events prof_trigger_0x where x is 0, 1, …, 7. All counters are reset before each kernel launch (note that when collecting counters, kernel launches are synchronous as mentioned in Concurrent Execution between Host and Device).
7.32. Assertion
Assertion is only supported by devices of compute capability 2.x and higher.
void assert(int expression);
stops the kernel execution if expression is equal to zero. If the program is run within a debugger, this triggers a breakpoint and the debugger can be used to inspect the current state of the device. Otherwise, each thread for which expression is equal to zero prints a message to stderr after synchronization with the host via cudaDeviceSynchronize(), cudaStreamSynchronize(), or cudaEventSynchronize(). The format of this message is as follows:
<filename>:<line number>:<function>:
block: [blockId.x,blockId.x,blockIdx.z],
thread: [threadIdx.x,threadIdx.y,threadIdx.z]
Assertion `<expression>` failed.
Any subsequent host-side synchronization calls made for the same device will return cudaErrorAssert. No more commands can be sent to this device until cudaDeviceReset() is called to reinitialize the device.
If expression is different from zero, the kernel execution is unaffected.
For example, the following program from source file test.cu
#include <assert.h>
__global__ void testAssert(void)
{
int is_one = 1;
int should_be_one = 0;
// This will have no effect
assert(is_one);
// This will halt kernel execution
assert(should_be_one);
}
int main(int argc, char* argv[])
{
testAssert<<<1,1>>>();
cudaDeviceSynchronize();
return 0;
}
will output:
test.cu:19: void testAssert(): block: [0,0,0], thread: [0,0,0] Assertion `should_be_one` failed.
Assertions are for debugging purposes. They can affect performance and it is therefore recommended to disable them in production code. They can be disabled at compile time by defining the NDEBUG preprocessor macro before including assert.h. Note that expression should not be an expression with side effects (something like(++i > 0), for example), otherwise disabling the assertion will affect the functionality of the code.
7.33. Trap function
A trap operation can be initiated by calling the __trap() function from any device thread.
void __trap();
The execution of the kernel is aborted and an interrupt is raised in the host program.
7.34. Breakpoint Function
Execution of a kernel function can be suspended by calling the __brkpt() function from any device thread.
void __brkpt();
7.35. Formatted Output
Formatted output is only supported by devices of compute capability 2.x and higher.
int printf(const char *format[, arg, ...]);
prints formatted output from a kernel to a host-side output stream.
The in-kernel printf() function behaves in a similar way to the standard C-library printf() function, and the user is referred to the host system’s manual pages for a complete description of printf() behavior. In essence, the string passed in as format is output to a stream on the host, with substitutions made from the argument list wherever a format specifier is encountered. Supported format specifiers are listed below.
The printf() command is executed as any other device-side function: per-thread, and in the context of the calling thread. From a multi-threaded kernel, this means that a straightforward call to printf() will be executed by every thread, using that thread’s data as specified. Multiple versions of the output string will then appear at the host stream, once for each thread which encountered the printf().
It is up to the programmer to limit the output to a single thread if only a single output string is desired (see Examples for an illustrative example).
Unlike the C-standard printf(), which returns the number of characters printed, CUDA’s printf() returns the number of arguments parsed. If no arguments follow the format string, 0 is returned. If the format string is NULL, -1 is returned. If an internal error occurs, -2 is returned.
7.35.1. Format Specifiers
As for standard printf(), format specifiers take the form: %[flags][width][.precision][size]type
The following fields are supported (see widely-available documentation for a complete description of all behaviors):
Flags:
'#' ' ' '0' '+' '-'Width:
'*' '0-9'Precision:
'0-9'Size:
'h' 'l' 'll'Type:
"%cdiouxXpeEfgGaAs"
Note that CUDA’s printf()will accept any combination of flag, width, precision, size and type, whether or not overall they form a valid format specifier. In other words, “%hd” will be accepted and printf will expect a double-precision variable in the corresponding location in the argument list.
7.35.2. Limitations
Final formatting of the printf()output takes place on the host system. This means that the format string must be understood by the host-system’s compiler and C library. Every effort has been made to ensure that the format specifiers supported by CUDA’s printf function form a universal subset from the most common host compilers, but exact behavior will be host-OS-dependent.
As described in Format Specifiers, printf() will accept all combinations of valid flags and types. This is because it cannot determine what will and will not be valid on the host system where the final output is formatted. The effect of this is that output may be undefined if the program emits a format string which contains invalid combinations.
The printf() command can accept at most 32 arguments in addition to the format string. Additional arguments beyond this will be ignored, and the format specifier output as-is.
Owing to the differing size of the long type on 64-bit Windows platforms (four bytes on 64-bit Windows platforms, eight bytes on other 64-bit platforms), a kernel which is compiled on a non-Windows 64-bit machine but then run on a win64 machine will see corrupted output for all format strings which include “%ld”. It is recommended that the compilation platform matches the execution platform to ensure safety.
The output buffer for printf() is set to a fixed size before kernel launch (see Associated Host-Side API). It is circular and if more output is produced during kernel execution than can fit in the buffer, older output is overwritten. It is flushed only when one of these actions is performed:
Kernel launch via
<<<>>>orcuLaunchKernel()(at the start of the launch, and if the CUDA_LAUNCH_BLOCKING environment variable is set to 1, at the end of the launch as well),Synchronization via
cudaDeviceSynchronize(),cuCtxSynchronize(),cudaStreamSynchronize(),cuStreamSynchronize(),cudaEventSynchronize(), orcuEventSynchronize(),Memory copies via any blocking version of
cudaMemcpy*()orcuMemcpy*(),Module loading/unloading via
cuModuleLoad()orcuModuleUnload(),Context destruction via
cudaDeviceReset()orcuCtxDestroy().Prior to executing a stream callback added by
cudaStreamAddCallbackorcuStreamAddCallback.
Note that the buffer is not flushed automatically when the program exits. The user must call cudaDeviceReset() or cuCtxDestroy() explicitly, as shown in the examples below.
Internally printf() uses a shared data structure and so it is possible that calling printf() might change the order of execution of threads. In particular, a thread which calls printf() might take a longer execution path than one which does not call printf(), and that path length is dependent upon the parameters of the printf(). Note, however, that CUDA makes no guarantees of thread execution order except at explicit __syncthreads() barriers, so it is impossible to tell whether execution order has been modified by printf() or by other scheduling behavior in the hardware.
7.35.3. Associated Host-Side API
The following API functions get and set the size of the buffer used to transfer the printf() arguments and internal metadata to the host (default is 1 megabyte):
cudaDeviceGetLimit(size_t* size,cudaLimitPrintfFifoSize)cudaDeviceSetLimit(cudaLimitPrintfFifoSize, size_t size)
7.35.4. Examples
The following code sample:
#include <stdio.h>
__global__ void helloCUDA(float f)
{
printf("Hello thread %d, f=%f\n", threadIdx.x, f);
}
int main()
{
helloCUDA<<<1, 5>>>(1.2345f);
cudaDeviceSynchronize();
return 0;
}
will output:
Hello thread 2, f=1.2345
Hello thread 1, f=1.2345
Hello thread 4, f=1.2345
Hello thread 0, f=1.2345
Hello thread 3, f=1.2345
Notice how each thread encounters the printf() command, so there are as many lines of output as there were threads launched in the grid. As expected, global values (i.e., float f) are common between all threads, and local values (i.e., threadIdx.x) are distinct per-thread.
The following code sample:
#include <stdio.h>
__global__ void helloCUDA(float f)
{
if (threadIdx.x == 0)
printf("Hello thread %d, f=%f\n", threadIdx.x, f) ;
}
int main()
{
helloCUDA<<<1, 5>>>(1.2345f);
cudaDeviceSynchronize();
return 0;
}
will output:
Hello thread 0, f=1.2345
Self-evidently, the if() statement limits which threads will call printf, so that only a single line of output is seen.
7.36. Dynamic Global Memory Allocation and Operations
Dynamic global memory allocation and operations are only supported by devices of compute capability 2.x and higher.
__host__ __device__ void* malloc(size_t size);
__device__ void *__nv_aligned_device_malloc(size_t size, size_t align);
__host__ __device__ void free(void* ptr);
allocate and free memory dynamically from a fixed-size heap in global memory.
__host__ __device__ void* memcpy(void* dest, const void* src, size_t size);
copy size bytes from the memory location pointed by src to the memory location pointed by dest.
__host__ __device__ void* memset(void* ptr, int value, size_t size);
set size bytes of memory block pointed by ptr to value (interpreted as an unsigned char).
The CUDA in-kernel malloc()function allocates at least size bytes from the device heap and returns a pointer to the allocated memory or NULL if insufficient memory exists to fulfill the request. The returned pointer is guaranteed to be aligned to a 16-byte boundary.
The CUDA in-kernel __nv_aligned_device_malloc() function allocates at least size bytes from the device heap and returns a pointer to the allocated memory or NULL if insufficient memory exists to fulfill the requested size or alignment. The address of the allocated memory will be a multiple of align. align must be a non-zero power of 2.
The CUDA in-kernel free() function deallocates the memory pointed to by ptr, which must have been returned by a previous call to malloc() or __nv_aligned_device_malloc(). If ptr is NULL, the call to free() is ignored. Repeated calls to free() with the same ptr has undefined behavior.
The memory allocated by a given CUDA thread via malloc() or __nv_aligned_device_malloc() remains allocated for the lifetime of the CUDA context, or until it is explicitly released by a call to free(). It can be used by any other CUDA threads even from subsequent kernel launches. Any CUDA thread may free memory allocated by another thread, but care should be taken to ensure that the same pointer is not freed more than once.
7.36.1. Heap Memory Allocation
The device memory heap has a fixed size that must be specified before any program using malloc(), __nv_aligned_device_malloc() or free() is loaded into the context. A default heap of eight megabytes is allocated if any program uses malloc() or __nv_aligned_device_malloc() without explicitly specifying the heap size.
The following API functions get and set the heap size:
cudaDeviceGetLimit(size_t* size, cudaLimitMallocHeapSize)cudaDeviceSetLimit(cudaLimitMallocHeapSize, size_t size)
The heap size granted will be at least size bytes. cuCtxGetLimit()and cudaDeviceGetLimit() return the currently requested heap size.
The actual memory allocation for the heap occurs when a module is loaded into the context, either explicitly via the CUDA driver API (see Module), or implicitly via the CUDA runtime API (see CUDA Runtime). If the memory allocation fails, the module load will generate a CUDA_ERROR_SHARED_OBJECT_INIT_FAILED error.
Heap size cannot be changed once a module load has occurred and it does not resize dynamically according to need.
Memory reserved for the device heap is in addition to memory allocated through host-side CUDA API calls such as cudaMalloc().
7.36.2. Interoperability with Host Memory API
Memory allocated via device malloc() or __nv_aligned_device_malloc() cannot be freed using the runtime (i.e., by calling any of the free memory functions from Device Memory).
Similarly, memory allocated via the runtime (i.e., by calling any of the memory allocation functions from Device Memory) cannot be freed via free().
In addition, memory allocated by a call to malloc() or __nv_aligned_device_malloc() in device code cannot be used in any runtime or driver API calls (i.e. cudaMemcpy, cudaMemset, etc).
7.36.3. Examples
7.36.3.1. Per Thread Allocation
The following code sample:
#include <stdlib.h>
#include <stdio.h>
__global__ void mallocTest()
{
size_t size = 123;
char* ptr = (char*)malloc(size);
memset(ptr, 0, size);
printf("Thread %d got pointer: %p\n", threadIdx.x, ptr);
free(ptr);
}
int main()
{
// Set a heap size of 128 megabytes. Note that this must
// be done before any kernel is launched.
cudaDeviceSetLimit(cudaLimitMallocHeapSize, 128*1024*1024);
mallocTest<<<1, 5>>>();
cudaDeviceSynchronize();
return 0;
}
will output:
Thread 0 got pointer: 00057020
Thread 1 got pointer: 0005708c
Thread 2 got pointer: 000570f8
Thread 3 got pointer: 00057164
Thread 4 got pointer: 000571d0
Notice how each thread encounters the malloc() and memset() commands and so receives and initializes its own allocation. (Exact pointer values will vary: these are illustrative.)
7.36.3.2. Per Thread Block Allocation
#include <stdlib.h>
__global__ void mallocTest()
{
__shared__ int* data;
// The first thread in the block does the allocation and then
// shares the pointer with all other threads through shared memory,
// so that access can easily be coalesced.
// 64 bytes per thread are allocated.
if (threadIdx.x == 0) {
size_t size = blockDim.x * 64;
data = (int*)malloc(size);
}
__syncthreads();
// Check for failure
if (data == NULL)
return;
// Threads index into the memory, ensuring coalescence
int* ptr = data;
for (int i = 0; i < 64; ++i)
ptr[i * blockDim.x + threadIdx.x] = threadIdx.x;
// Ensure all threads complete before freeing
__syncthreads();
// Only one thread may free the memory!
if (threadIdx.x == 0)
free(data);
}
int main()
{
cudaDeviceSetLimit(cudaLimitMallocHeapSize, 128*1024*1024);
mallocTest<<<10, 128>>>();
cudaDeviceSynchronize();
return 0;
}
7.36.3.3. Allocation Persisting Between Kernel Launches
#include <stdlib.h>
#include <stdio.h>
#define NUM_BLOCKS 20
__device__ int* dataptr[NUM_BLOCKS]; // Per-block pointer
__global__ void allocmem()
{
// Only the first thread in the block does the allocation
// since we want only one allocation per block.
if (threadIdx.x == 0)
dataptr[blockIdx.x] = (int*)malloc(blockDim.x * 4);
__syncthreads();
// Check for failure
if (dataptr[blockIdx.x] == NULL)
return;
// Zero the data with all threads in parallel
dataptr[blockIdx.x][threadIdx.x] = 0;
}
// Simple example: store thread ID into each element
__global__ void usemem()
{
int* ptr = dataptr[blockIdx.x];
if (ptr != NULL)
ptr[threadIdx.x] += threadIdx.x;
}
// Print the content of the buffer before freeing it
__global__ void freemem()
{
int* ptr = dataptr[blockIdx.x];
if (ptr != NULL)
printf("Block %d, Thread %d: final value = %d\n",
blockIdx.x, threadIdx.x, ptr[threadIdx.x]);
// Only free from one thread!
if (threadIdx.x == 0)
free(ptr);
}
int main()
{
cudaDeviceSetLimit(cudaLimitMallocHeapSize, 128*1024*1024);
// Allocate memory
allocmem<<< NUM_BLOCKS, 10 >>>();
// Use memory
usemem<<< NUM_BLOCKS, 10 >>>();
usemem<<< NUM_BLOCKS, 10 >>>();
usemem<<< NUM_BLOCKS, 10 >>>();
// Free memory
freemem<<< NUM_BLOCKS, 10 >>>();
cudaDeviceSynchronize();
return 0;
}
7.37. Execution Configuration
Any call to a __global__ function must specify the execution configuration for that call. The execution configuration defines the dimension of the grid and blocks that will be used to execute the function on the device, as well as the associated stream (see CUDA Runtime for a description of streams).
The execution configuration is specified by inserting an expression of the form <<< Dg, Db, Ns, S >>> between the function name and the parenthesized argument list, where:
Dgis of typedim3(see dim3) and specifies the dimension and size of the grid, such thatDg.x * Dg.y * Dg.zequals the number of blocks being launched;Dbis of typedim3(see dim3) and specifies the dimension and size of each block, such thatDb.x * Db.y * Db.zequals the number of threads per block;Nsis of typesize_tand specifies the number of bytes in shared memory that is dynamically allocated per block for this call in addition to the statically allocated memory; this dynamically allocated memory is used by any of the variables declared as an external array as mentioned in __shared__;Nsis an optional argument which defaults to 0;Sis of typecudaStream_tand specifies the associated stream;Sis an optional argument which defaults to 0.
As an example, a function declared as
__global__ void Func(float* parameter);
must be called like this:
Func<<< Dg, Db, Ns >>>(parameter);
The arguments to the execution configuration are evaluated before the actual function arguments.
The function call will fail if Dg or Db are greater than the maximum sizes allowed for the device as specified in Compute Capabilities, or if Ns is greater than the maximum amount of shared memory available on the device, minus the amount of shared memory required for static allocation.
Compute capability 9.0 and above allows users to specify compile time thread block cluster dimensions, so that the kernel can use the cluster hierarchy in CUDA. Compile time cluster dimension can be specified using __cluster_dims__([x, [y, [z]]]). The example below shows compile time cluster size of 2 in X dimension and 1 in Y and Z dimension.
__global__ void __cluster_dims__(2, 1, 1) Func(float* parameter);
Thread block cluster dimensions can also be specified at runtime and kernel with the cluster can be launched using cudaLaunchKernelEx API. The API takes a configuration arugument of type cudaLaunchConfig_t, kernel function pointer and kernel arguments. Runtime kernel configuration is shown in the example below.
__global__ void Func(float* parameter);
// Kernel invocation with runtime cluster size
{
cudaLaunchConfig_t config = {0};
// The grid dimension is not affected by cluster launch, and is still enumerated
// using number of blocks.
// The grid dimension should be a multiple of cluster size.
config.gridDim = Dg;
config.blockDim = Db;
config.dynamicSmemBytes = Ns;
cudaLaunchAttribute attribute[1];
attribute[0].id = cudaLaunchAttributeClusterDimension;
attribute[0].val.clusterDim.x = 2; // Cluster size in X-dimension
attribute[0].val.clusterDim.y = 1;
attribute[0].val.clusterDim.z = 1;
config.attrs = attribute;
config.numAttrs = 1;
float* parameter;
cudaLaunchKernelEx(&config, Func, parameter);
}
7.38. Launch Bounds
As discussed in detail in Multiprocessor Level, the fewer registers a kernel uses, the more threads and thread blocks are likely to reside on a multiprocessor, which can improve performance.
Therefore, the compiler uses heuristics to minimize register usage while keeping register spilling (see Device Memory Accesses) and instruction count to a minimum. An application can optionally aid these heuristics by providing additional information to the compiler in the form of launch bounds that are specified using the __launch_bounds__() qualifier in the definition of a __global__ function:
__global__ void
__launch_bounds__(maxThreadsPerBlock, minBlocksPerMultiprocessor, maxBlocksPerCluster)
MyKernel(...)
{
...
}
maxThreadsPerBlockspecifies the maximum number of threads per block with which the application will ever launchMyKernel(); it compiles to the.maxntidPTX directive.minBlocksPerMultiprocessoris optional and specifies the desired minimum number of resident blocks per multiprocessor; it compiles to the.minnctapersmPTX directive.maxBlocksPerClusteris optional and specifies the desired maximum number thread blocks per cluster with which the application will ever launchMyKernel(); it compiles to the.maxclusterrankPTX directive.
If launch bounds are specified, the compiler first derives from them the upper limit L on the number of registers the kernel should use to ensure that minBlocksPerMultiprocessor blocks (or a single block if minBlocksPerMultiprocessor is not specified) of maxThreadsPerBlock threads can reside on the multiprocessor (see Hardware Multithreading for the relationship between the number of registers used by a kernel and the number of registers allocated per block). The compiler then optimizes register usage in the following way:
If the initial register usage is higher than L, the compiler reduces it further until it becomes less or equal to L, usually at the expense of more local memory usage and/or higher number of instructions;
-
If the initial register usage is lower than L
If
maxThreadsPerBlockis specified andminBlocksPerMultiprocessoris not, the compiler usesmaxThreadsPerBlockto determine the register usage thresholds for the transitions betweennandn+1resident blocks (i.e., when using one less register makes room for an additional resident block as in the example of Multiprocessor Level) and then applies similar heuristics as when no launch bounds are specified;If both
minBlocksPerMultiprocessorandmaxThreadsPerBlockare specified, the compiler may increase register usage as high as L to reduce the number of instructions and better hide single thread instruction latency.
A kernel will fail to launch if it is executed with more threads per block than its launch bound maxThreadsPerBlock.
A kernel will fail to launch if it is executed with more thread blocks per cluster than its launch bound maxBlocksPerCluster.
Per thread resources required by a CUDA kernel might limit the maximum block size in an unwanted way. In order to maintain forward compatibility to future hardware and toolkits and to ensure that at least one thread block can run on an SM, developers should include the single argument __launch_bounds__(maxThreadsPerBlock) which specifies the largest block size that the kernel will be launched with. Failure to do so could lead to “too many resources requested for launch” errors. Providing the two argument version of __launch_bounds__(maxThreadsPerBlock,minBlocksPerMultiprocessor) can improve performance in some cases. The right value for minBlocksPerMultiprocessor should be determined using a detailed per kernel analysis.
Optimal launch bounds for a given kernel will usually differ across major architecture revisions. The sample code below shows how this is typically handled in device code using the __CUDA_ARCH__ macro introduced in Application Compatibility.
#define THREADS_PER_BLOCK 256
#if __CUDA_ARCH__ >= 200
#define MY_KERNEL_MAX_THREADS (2 * THREADS_PER_BLOCK)
#define MY_KERNEL_MIN_BLOCKS 3
#else
#define MY_KERNEL_MAX_THREADS THREADS_PER_BLOCK
#define MY_KERNEL_MIN_BLOCKS 2
#endif
// Device code
__global__ void
__launch_bounds__(MY_KERNEL_MAX_THREADS, MY_KERNEL_MIN_BLOCKS)
MyKernel(...)
{
...
}
In the common case where MyKernel is invoked with the maximum number of threads per block (specified as the first parameter of __launch_bounds__()), it is tempting to use MY_KERNEL_MAX_THREADS as the number of threads per block in the execution configuration:
// Host code
MyKernel<<<blocksPerGrid, MY_KERNEL_MAX_THREADS>>>(...);
This will not work however since __CUDA_ARCH__ is undefined in host code as mentioned in Application Compatibility, so MyKernel will launch with 256 threads per block even when __CUDA_ARCH__ is greater or equal to 200. Instead the number of threads per block should be determined:
-
Either at compile time using a macro that does not depend on
__CUDA_ARCH__, for example// Host code MyKernel<<<blocksPerGrid, THREADS_PER_BLOCK>>>(...);
-
Or at runtime based on the compute capability
// Host code cudaGetDeviceProperties(&deviceProp, device); int threadsPerBlock = (deviceProp.major >= 2 ? 2 * THREADS_PER_BLOCK : THREADS_PER_BLOCK); MyKernel<<<blocksPerGrid, threadsPerBlock>>>(...);
Register usage is reported by the --ptxas-options=-v compiler option. The number of resident blocks can be derived from the occupancy reported by the CUDA profiler (see Device Memory Accesses for a definition of occupancy).
The __launch_bounds__() and __maxnreg__() qualifiers cannot be applied to the same kernel.
Register usage can also be controlled for all __global__ functions in a file using the maxrregcount compiler option. The value of maxrregcount is ignored for functions with launch bounds.
7.39. Maximum Number of Registers per Thread
To provide a mechanism for low-level performance tuning, CUDA C++ provides the __maxnreg__() function qualifier to pass performance tuning information to the backend optimizing compiler. The
__maxnreg__() qualifier specifies the maximum number of registers to be allocated to a single thread in a thread block. In the definition of a __global__ function:
__global__ void
__maxnreg__(maxNumberRegistersPerThread)
MyKernel(...)
{
...
}
maxNumberRegistersPerThreadspecifies the maximum number of registers to be allocated to a single thread in a thread block of the kernelMyKernel(); it compiles to the.maxnregPTX directive.
The __launch_bounds__() and __maxnreg__() qualifiers cannot be applied to the same kernel.
Register usage can also be controlled for all __global__ functions in a file using the maxrregcount compiler option. The value of maxrregcount is ignored for functions with the __maxnreg__ qualifier.
7.40. #pragma unroll
By default, the compiler unrolls small loops with a known trip count. The #pragma unroll directive however can be used to control unrolling of any given loop. It must be placed immediately before the loop and only applies to that loop. It is optionally followed by an integral constant expression (ICE)13. If the ICE is absent, the loop will be completely unrolled if its trip count is constant. If the ICE evaluates to 1, the compiler will not unroll the loop. The pragma will be ignored if the ICE evaluates to a non-positive integer or to an integer greater than the maximum value representable by the int data type.
Examples:
struct S1_t { static const int value = 4; };
template <int X, typename T2>
__device__ void foo(int *p1, int *p2) {
// no argument specified, loop will be completely unrolled
#pragma unroll
for (int i = 0; i < 12; ++i)
p1[i] += p2[i]*2;
// unroll value = 8
#pragma unroll (X+1)
for (int i = 0; i < 12; ++i)
p1[i] += p2[i]*4;
// unroll value = 1, loop unrolling disabled
#pragma unroll 1
for (int i = 0; i < 12; ++i)
p1[i] += p2[i]*8;
// unroll value = 4
#pragma unroll (T2::value)
for (int i = 0; i < 12; ++i)
p1[i] += p2[i]*16;
}
__global__ void bar(int *p1, int *p2) {
foo<7, S1_t>(p1, p2);
}
7.41. SIMD Video Instructions
PTX ISA version 3.0 includes SIMD (Single Instruction, Multiple Data) video instructions which operate on pairs of 16-bit values and quads of 8-bit values. These are available on devices of compute capability 3.0.
The SIMD video instructions are:
vadd2, vadd4
vsub2, vsub4
vavrg2, vavrg4
vabsdiff2, vabsdiff4
vmin2, vmin4
vmax2, vmax4
vset2, vset4
PTX instructions, such as the SIMD video instructions, can be included in CUDA programs by way of the assembler, asm(), statement.
The basic syntax of an asm() statement is:
asm("template-string" : "constraint"(output) : "constraint"(input)"));
An example of using the vabsdiff4 PTX instruction is:
asm("vabsdiff4.u32.u32.u32.add" " %0, %1, %2, %3;": "=r" (result):"r" (A), "r" (B), "r" (C));
This uses the vabsdiff4 instruction to compute an integer quad byte SIMD sum of absolute differences. The absolute difference value is computed for each byte of the unsigned integers A and B in SIMD fashion. The optional accumulate operation (.add) is specified to sum these differences.
Refer to the document “Using Inline PTX Assembly in CUDA” for details on using the assembly statement in your code. Refer to the PTX ISA documentation (“Parallel Thread Execution ISA Version 3.0” for example) for details on the PTX instructions for the version of PTX that you are using.
7.42. Diagnostic Pragmas
The following pragmas may be used to control the error severity used when a given diagnostic message is issued.
#pragma nv_diag_suppress
#pragma nv_diag_warning
#pragma nv_diag_error
#pragma nv_diag_default
#pragma nv_diag_once
Uses of these pragmas have the following form:
#pragma nv_diag_xxx error_number, error_number ...
The diagnostic affected is specified using an error number showed in a warning message. Any diagnostic may be overridden to be an error, but only warnings may have their severity suppressed or be restored to a warning after being promoted to an error. The nv_diag_default pragma is used to return the severity of a diagnostic to the one that was in effect before any pragmas were issued (i.e., the normal severity of the message as modified by any command-line options). The following example suppresses the "declared but never referenced" warning on the declaration of foo:
#pragma nv_diag_suppress 177
void foo()
{
int i=0;
}
#pragma nv_diag_default 177
void bar()
{
int i=0;
}
The following pragmas may be used to save and restore the current diagnostic pragma state:
#pragma nv_diagnostic push
#pragma nv_diagnostic pop
Examples:
#pragma nv_diagnostic push
#pragma nv_diag_suppress 177
void foo()
{
int i=0;
}
#pragma nv_diagnostic pop
void bar()
{
int i=0;
}
Note that the pragmas only affect the nvcc CUDA frontend compiler; they have no effect on the host compiler.
Removal Notice: The support of diagnostic pragmas without nv_ prefix are removed from CUDA 12.0, if the pragmas are inside the device code, warning unrecognized #pragma in device code will be emitted, otherwise they will be passed to the host compiler. If they are intended for CUDA code, use the pragmas with nv_ prefix instead.
- 11
-
When the enclosing __host__ function is a template, nvcc may currently fail to issue a diagnostic message in some cases; this behavior may change in the future.
- 12
-
The intent is to prevent the host compiler from encountering the call to the function if the host compiler does not support it.
- 13(1,2)
-
See the C++ Standard for definition of integral constant expression.
8. Cooperative Groups
8.1. Introduction
Cooperative Groups is an extension to the CUDA programming model, introduced in CUDA 9, for organizing groups of communicating threads. Cooperative Groups allows developers to express the granularity at which threads are communicating, helping them to express richer, more efficient parallel decompositions.
Historically, the CUDA programming model has provided a single, simple construct for synchronizing cooperating threads: a barrier across all threads of a thread block, as implemented with the __syncthreads() intrinsic function. However, programmers would like to define and synchronize groups of threads at other granularities to enable greater performance, design flexibility, and software reuse in the form of “collective” group-wide function interfaces. In an effort to express broader patterns of parallel interaction, many performance-oriented programmers have resorted to writing their own ad hoc and unsafe primitives for synchronizing threads within a single warp, or across sets of thread blocks running on a single GPU. Whilst the performance improvements achieved have often been valuable, this has resulted in an ever-growing collection of brittle code that is expensive to write, tune, and maintain over time and across GPU generations. Cooperative Groups addresses this by providing a safe and future-proof mechanism to enable performant code.
8.2. What’s New in Cooperative Groups
8.2.1. CUDA 12.2
barrier_arriveandbarrier_waitmember functions were added for grid_group and thread_block. Description of the API is available here.
8.2.2. CUDA 12.1
invoke_one and invoke_one_broadcast APIs were added.
8.2.3. CUDA 12.0
-
The following experimental APIs are now moved to the main namespace:
asynchronous reduce and scan update added in CUDA 11.7
thread_block_tilelarger than 32 added in CUDA 11.1
It is no longer required to provide memory using the
block_tile_memoryobject in order to create these large tiles on Compute Capability 8.0 or higher.
8.3. Programming Model Concept
The Cooperative Groups programming model describes synchronization patterns both within and across CUDA thread blocks. It provides both the means for applications to define their own groups of threads, and the interfaces to synchronize them. It also provides new launch APIs that enforce certain restrictions and therefore can guarantee the synchronization will work. These primitives enable new patterns of cooperative parallelism within CUDA, including producer-consumer parallelism, opportunistic parallelism, and global synchronization across the entire Grid.
The Cooperative Groups programming model consists of the following elements:
Data types for representing groups of cooperating threads;
Operations to obtain implicit groups defined by the CUDA launch API (e.g., thread blocks);
Collectives for partitioning existing groups into new groups;
Collective Algorithms for data movement and manipulation (e.g. memcpy_async, reduce, scan);
An operation to synchronize all threads within the group;
Operations to inspect the group properties;
Collectives that expose low-level, group-specific and often HW accelerated, operations.
The main concept in Cooperative Groups is that of objects naming the set of threads that are part of it. This expression of groups as first-class program objects improves software composition, since collective functions can receive an explicit object representing the group of participating threads. This object also makes programmer intent explicit, which eliminates unsound architectural assumptions that result in brittle code, undesirable restrictions upon compiler optimizations, and better compatibility with new GPU generations.
To write efficient code, its best to use specialized groups (going generic loses a lot of compile time optimizations), and pass these group objects by reference to functions that intend to use these threads in some cooperative fashion.
Cooperative Groups requires CUDA 9.0 or later. To use Cooperative Groups, include the header file:
// Primary header is compatible with pre-C++11, collective algorithm headers require C++11
#include <cooperative_groups.h>
// Optionally include for memcpy_async() collective
#include <cooperative_groups/memcpy_async.h>
// Optionally include for reduce() collective
#include <cooperative_groups/reduce.h>
// Optionally include for inclusive_scan() and exclusive_scan() collectives
#include <cooperative_groups/scan.h>
and use the Cooperative Groups namespace:
using namespace cooperative_groups;
// Alternatively use an alias to avoid polluting the namespace with collective algorithms
namespace cg = cooperative_groups;
The code can be compiled in a normal way using nvcc, however if you wish to use memcpy_async, reduce or scan functionality and your host compiler’s default dialect is not C++11 or higher, then you must add --std=c++11 to the command line.
8.3.1. Composition Example
To illustrate the concept of groups, this example attempts to perform a block-wide sum reduction. Previously, there were hidden constraints on the implementation when writing this code:
__device__ int sum(int *x, int n) {
// ...
__syncthreads();
return total;
}
__global__ void parallel_kernel(float *x) {
// ...
// Entire thread block must call sum
sum(x, n);
}
All threads in the thread block must arrive at the __syncthreads() barrier, however, this constraint is hidden from the developer who might want to use sum(…). With Cooperative Groups, a better way of writing this would be:
__device__ int sum(const thread_block& g, int *x, int n) {
// ...
g.sync()
return total;
}
__global__ void parallel_kernel(...) {
// ...
// Entire thread block must call sum
thread_block tb = this_thread_block();
sum(tb, x, n);
// ...
}
8.4. Group Types
8.4.1. Implicit Groups
Implicit groups represent the launch configuration of the kernel. Regardless of how your kernel is written, it always has a set number of threads, blocks and block dimensions, a single grid and grid dimensions. In addition, if the multi-device cooperative launch API is used, it can have multiple grids (single grid per device). These groups provide a starting point for decomposition into finer grained groups which are typically HW accelerated and are more specialized for the problem the developer is solving.
Although you can create an implicit group anywhere in the code, it is dangerous to do so. Creating a handle for an implicit group is a collective operation—all threads in the group must participate. If the group was created in a conditional branch that not all threads reach, this can lead to deadlocks or data corruption. For this reason, it is recommended that you create a handle for the implicit group upfront (as early as possible, before any branching has occurred) and use that handle throughout the kernel. Group handles must be initialized at declaration time (there is no default constructor) for the same reason and copy-constructing them is discouraged.
8.4.1.1. Thread Block Group
Any CUDA programmer is already familiar with a certain group of threads: the thread block. The Cooperative Groups extension introduces a new datatype, thread_block, to explicitly represent this concept within the kernel.
class thread_block;
Constructed via:
thread_block g = this_thread_block();
Public Member Functions:
static void sync(): Synchronize the threads named in the group, equivalent to g.barrier_wait(g.barrier_arrive())
thread_block::arrival_token barrier_arrive(): Arrive on the thread_block barrier, returns a token that needs to be passed into barrier_wait(). More details here
void barrier_wait(thread_block::arrival_token&& t): Wait on the thread_block barrier, takes arrival token returned from barrier_arrive() as an rvalue reference. More details here
static unsigned int thread_rank(): Rank of the calling thread within [0, num_threads)
static dim3 group_index(): 3-Dimensional index of the block within the launched grid
static dim3 thread_index(): 3-Dimensional index of the thread within the launched block
static dim3 dim_threads(): Dimensions of the launched block in units of threads
static unsigned int num_threads(): Total number of threads in the group
Legacy member functions (aliases):
static unsigned int size(): Total number of threads in the group (alias of num_threads())
static dim3 group_dim(): Dimensions of the launched block (alias of dim_threads())
Example:
/// Loading an integer from global into shared memory
__global__ void kernel(int *globalInput) {
__shared__ int x;
thread_block g = this_thread_block();
// Choose a leader in the thread block
if (g.thread_rank() == 0) {
// load from global into shared for all threads to work with
x = (*globalInput);
}
// After loading data into shared memory, you want to synchronize
// if all threads in your thread block need to see it
g.sync(); // equivalent to __syncthreads();
}
Note: that all threads in the group must participate in collective operations, or the behavior is undefined.
Related: The thread_block datatype is derived from the more generic thread_group datatype, which can be used to represent a wider class of groups.
8.4.1.2. Cluster Group
This group object represents all the threads launched in a single cluster. Refer to Thread Block Clusters. The APIs are available on all hardware with Compute Capability 9.0+. In such cases, when a non-cluster grid is launched, the APIs assume a 1x1x1 cluster.
class cluster_group;
Constructed via:
cluster_group g = this_cluster();
Public Member Functions:
static void sync(): Synchronize the threads named in the group, equivalent to g.barrier_wait(g.barrier_arrive())
static cluster_group::arrival_token barrier_arrive(): Arrive on the cluster barrier, returns a token that needs to be passed into barrier_wait(). More details here
static void barrier_wait(cluster_group::arrival_token&& t): Wait on the cluster barrier, takes arrival token returned from barrier_arrive() as a rvalue reference. More details here
static unsigned int thread_rank(): Rank of the calling thread within [0, num_threads)
static unsigned int block_rank(): Rank of the calling block within [0, num_blocks)
static unsigned int num_threads(): Total number of threads in the group
static unsigned int num_blocks(): Total number of blocks in the group
static dim3 dim_threads(): Dimensions of the launched cluster in units of threads
static dim3 dim_blocks(): Dimensions of the launched cluster in units of blocks
static dim3 block_index(): 3-Dimensional index of the calling block within the launched cluster
static unsigned int query_shared_rank(const void *addr): Obtain the block rank to which a shared memory address belongs
static T* map_shared_rank(T *addr, int rank): Obtain the address of a shared memory variable of another block in the cluster
Legacy member functions (aliases):
static unsigned int size(): Total number of threads in the group (alias of num_threads())
8.4.1.3. Grid Group
This group object represents all the threads launched in a single grid. APIs other than sync() are available at all times, but to be able to synchronize across the grid, you need to use the cooperative launch API.
class grid_group;
Constructed via:
grid_group g = this_grid();
Public Member Functions:
bool is_valid() const: Returns whether the grid_group can synchronize
void sync() const: Synchronize the threads named in the group, equivalent to g.barrier_wait(g.barrier_arrive())
grid_group::arrival_token barrier_arrive(): Arrive on the grid barrier, returns a token that needs to be passed into barrier_wait(). More details here
void barrier_wait(grid_group::arrival_token&& t): Wait on the grid barrier, takes arrival token returned from barrier_arrive() as a rvalue reference. More details here
static unsigned long long thread_rank(): Rank of the calling thread within [0, num_threads)
static unsigned long long block_rank(): Rank of the calling block within [0, num_blocks)
static unsigned long long cluster_rank(): Rank of the calling cluster within [0, num_clusters)
static unsigned long long num_threads(): Total number of threads in the group
static unsigned long long num_blocks(): Total number of blocks in the group
static unsigned long long num_clusters(): Total number of clusters in the group
static dim3 dim_blocks(): Dimensions of the launched grid in units of blocks
static dim3 dim_clusters(): Dimensions of the launched grid in units of clusters
static dim3 block_index(): 3-Dimensional index of the block within the launched grid
static dim3 cluster_index(): 3-Dimensional index of the cluster within the launched grid
Legacy member functions (aliases):
static unsigned long long size(): Total number of threads in the group (alias of num_threads())
static dim3 group_dim(): Dimensions of the launched grid (alias of dim_blocks())
8.4.1.4. Multi Grid Group
This group object represents all the threads launched across all devices of a multi-device cooperative launch. Unlike the grid.group, all the APIs require that you have used the appropriate launch API.
class multi_grid_group;
Constructed via:
// Kernel must be launched with the cooperative multi-device API
multi_grid_group g = this_multi_grid();
Public Member Functions:
bool is_valid() const: Returns whether the multi_grid_group can be used
void sync() const: Synchronize the threads named in the group
unsigned long long num_threads() const: Total number of threads in the group
unsigned long long thread_rank() const: Rank of the calling thread within [0, num_threads)
unsigned int grid_rank() const: Rank of the grid within [0,num_grids]
unsigned int num_grids() const: Total number of grids launched
Legacy member functions (aliases):
unsigned long long size() const: Total number of threads in the group (alias of num_threads())
Deprecation Notice: multi_grid_group has been deprecated in CUDA 11.3 for all devices.
8.4.2. Explicit Groups
8.4.2.1. Thread Block Tile
A templated version of a tiled group, where a template parameter is used to specify the size of the tile - with this known at compile time there is the potential for more optimal execution.
template <unsigned int Size, typename ParentT = void>
class thread_block_tile;
Constructed via:
template <unsigned int Size, typename ParentT>
_CG_QUALIFIER thread_block_tile<Size, ParentT> tiled_partition(const ParentT& g)
Size must be a power of 2 and less than or equal to 1024. Notes section describes extra steps needed to create tiles of size larger than 32 on hardware with Compute Capability 7.5 or lower.
ParentT is the parent-type from which this group was partitioned. It is automatically inferred, but a value of void will store this information in the group handle rather than in the type.
Public Member Functions:
void sync() const: Synchronize the threads named in the group
unsigned long long num_threads() const: Total number of threads in the group
unsigned long long thread_rank() const: Rank of the calling thread within [0, num_threads)
unsigned long long meta_group_size() const: Returns the number of groups created when the parent group was partitioned.
unsigned long long meta_group_rank() const: Linear rank of the group within the set of tiles partitioned from a parent group (bounded by meta_group_size)
T shfl(T var, unsigned int src_rank) const: Refer to Warp Shuffle Functions, Note: For sizes larger than 32 all threads in the group have to specify the same src_rank, otherwise the behavior is undefined.
T shfl_up(T var, int delta) const: Refer to Warp Shuffle Functions, available only for sizes lower or equal to 32.
T shfl_down(T var, int delta) const: Refer to Warp Shuffle Functions, available only for sizes lower or equal to 32.
T shfl_xor(T var, int delta) const: Refer to Warp Shuffle Functions, available only for sizes lower or equal to 32.
T any(int predicate) const: Refer to Warp Vote Functions
T all(int predicate) const: Refer to Warp Vote Functions
T ballot(int predicate) const: Refer to Warp Vote Functions, available only for sizes lower or equal to 32.
unsigned int match_any(T val) const: Refer to Warp Match Functions, available only for sizes lower or equal to 32.
unsigned int match_all(T val, int &pred) const: Refer to Warp Match Functions, available only for sizes lower or equal to 32.
Legacy member functions (aliases):
unsigned long long size() const: Total number of threads in the group (alias of num_threads())
Notes:
thread_block_tiletemplated data structure is being used here, the size of the group is passed to thetiled_partitioncall as a template parameter rather than an argument.-
shfl, shfl_up, shfl_down, and shfl_xorfunctions accept objects of any type when compiled with C++11 or later. This means it’s possible to shuffle non-integral types as long as they satisfy the below constraints:Qualifies as trivially copyable i.e.,
is_trivially_copyable<T>::value == truesizeof(T) <= 32for tile sizes lower or equal 32,sizeof(T) <= 8for larger tiles
-
On hardware with Compute Capability 7.5 or lower tiles of size larger than 32 need small amount of memory reserved for them. This can be done using
cooperative_groups::block_tile_memorystruct template that has to reside in either shared or global memory.template <unsigned int MaxBlockSize = 1024> struct block_tile_memory;
MaxBlockSizeSpecifies the maximal number of threads in the current thread block. This parameter can be used to minimize the shared memory usage ofblock_tile_memoryin kernels launched only with smaller thread counts.This
block_tile_memoryneeds be then passed intocooperative_groups::this_thread_block, allowing the resultingthread_blockto be partitioned into tiles of sizes larger than 32. Overload ofthis_thread_blockacceptingblock_tile_memoryargument is a collective operation and has to be called with all threads in thethread_block.block_tile_memorycan be used on hardware with Compute Capability 8.0 or higher in order to be able to write one source targeting multiple different Compute Capabilities. It should consume no memory when instantiated in shared memory in cases where its not required.
Examples:
/// The following code will create two sets of tiled groups, of size 32 and 4 respectively:
/// The latter has the provenance encoded in the type, while the first stores it in the handle
thread_block block = this_thread_block();
thread_block_tile<32> tile32 = tiled_partition<32>(block);
thread_block_tile<4, thread_block> tile4 = tiled_partition<4>(block);
/// The following code will create tiles of size 128 on all Compute Capabilities.
/// block_tile_memory can be omitted on Compute Capability 8.0 or higher.
__global__ void kernel(...) {
// reserve shared memory for thread_block_tile usage,
// specify that block size will be at most 256 threads.
__shared__ block_tile_memory<256> shared;
thread_block thb = this_thread_block(shared);
// Create tiles with 128 threads.
auto tile = tiled_partition<128>(thb);
// ...
}
8.4.2.1.1. Warp-Synchronous Code Pattern
Developers might have had warp-synchronous codes that they previously made implicit assumptions about the warp size and would code around that number. Now this needs to be specified explicitly.
__global__ void cooperative_kernel(...) {
// obtain default "current thread block" group
thread_block my_block = this_thread_block();
// subdivide into 32-thread, tiled subgroups
// Tiled subgroups evenly partition a parent group into
// adjacent sets of threads - in this case each one warp in size
auto my_tile = tiled_partition<32>(my_block);
// This operation will be performed by only the
// first 32-thread tile of each block
if (my_tile.meta_group_rank() == 0) {
// ...
my_tile.sync();
}
}
8.4.2.1.2. Single Thread Group
Group representing the current thread can be obtained from this_thread function:
thread_block_tile<1> this_thread();
The following memcpy_async API uses a thread_group, to copy an int element from source to destination:
#include <cooperative_groups.h>
#include <cooperative_groups/memcpy_async.h>
cooperative_groups::memcpy_async(cooperative_groups::this_thread(), dest, src, sizeof(int));
More detailed examples of using this_thread to perform asynchronous copies can be found in the Single-Stage Asynchronous Data Copies using cuda::pipeline and Multi-Stage Asynchronous Data Copies using cuda::pipeline sections.
8.4.2.2. Coalesced Groups
In CUDA’s SIMT architecture, at the hardware level the multiprocessor executes threads in groups of 32 called warps. If there exists a data-dependent conditional branch in the application code such that threads within a warp diverge, then the warp serially executes each branch disabling threads not on that path. The threads that remain active on the path are referred to as coalesced. Cooperative Groups has functionality to discover, and create, a group containing all coalesced threads.
Constructing the group handle via coalesced_threads() is opportunistic. It returns the set of active threads at that point in time, and makes no guarantee about which threads are returned (as long as they are active) or that they will stay coalesced throughout execution (they will be brought back together for the execution of a collective but can diverge again afterwards).
class coalesced_group;
Constructed via:
coalesced_group active = coalesced_threads();
Public Member Functions:
void sync() const: Synchronize the threads named in the group
unsigned long long num_threads() const: Total number of threads in the group
unsigned long long thread_rank() const: Rank of the calling thread within [0, num_threads)
unsigned long long meta_group_size() const: Returns the number of groups created when the parent group was partitioned. If this group was created by querying the set of active threads, for example coalesced_threads() the value of meta_group_size() will be 1.
unsigned long long meta_group_rank() const: Linear rank of the group within the set of tiles partitioned from a parent group (bounded by meta_group_size). If this group was created by querying the set of active threads, e.g. coalesced_threads() the value of meta_group_rank() will always be 0.
T shfl(T var, unsigned int src_rank) const: Refer to Warp Shuffle Functions
T shfl_up(T var, int delta) const: Refer to Warp Shuffle Functions
T shfl_down(T var, int delta) const: Refer to Warp Shuffle Functions
T any(int predicate) const: Refer to Warp Vote Functions
T all(int predicate) const: Refer to Warp Vote Functions
T ballot(int predicate) const: Refer to Warp Vote Functions
unsigned int match_any(T val) const: Refer to Warp Match Functions
unsigned int match_all(T val, int &pred) const: Refer to Warp Match Functions
Legacy member functions (aliases):
unsigned long long size() const: Total number of threads in the group (alias of num_threads())
Notes:
shfl, shfl_up, and shfl_down functions accept objects of any type when compiled with C++11 or later. This means it’s possible to shuffle non-integral types as long as they satisfy the below constraints:
Qualifies as trivially copyable i.e.
is_trivially_copyable<T>::value == truesizeof(T) <= 32
Example:
/// Consider a situation whereby there is a branch in the
/// code in which only the 2nd, 4th and 8th threads in each warp are
/// active. The coalesced_threads() call, placed in that branch, will create (for each
/// warp) a group, active, that has three threads (with
/// ranks 0-2 inclusive).
__global__ void kernel(int *globalInput) {
// Lets say globalInput says that threads 2, 4, 8 should handle the data
if (threadIdx.x == *globalInput) {
coalesced_group active = coalesced_threads();
// active contains 0-2 inclusive
active.sync();
}
}
8.4.2.2.1. Discovery Pattern
Commonly developers need to work with the current active set of threads. No assumption is made about the threads that are present, and instead developers work with the threads that happen to be there. This is seen in the following “aggregating atomic increment across threads in a warp” example (written using the correct CUDA 9.0 set of intrinsics):
{
unsigned int writemask = __activemask();
unsigned int total = __popc(writemask);
unsigned int prefix = __popc(writemask & __lanemask_lt());
// Find the lowest-numbered active lane
int elected_lane = __ffs(writemask) - 1;
int base_offset = 0;
if (prefix == 0) {
base_offset = atomicAdd(p, total);
}
base_offset = __shfl_sync(writemask, base_offset, elected_lane);
int thread_offset = prefix + base_offset;
return thread_offset;
}
This can be re-written with Cooperative Groups as follows:
{
cg::coalesced_group g = cg::coalesced_threads();
int prev;
if (g.thread_rank() == 0) {
prev = atomicAdd(p, g.num_threads());
}
prev = g.thread_rank() + g.shfl(prev, 0);
return prev;
}
8.5. Group Partitioning
8.5.1. tiled_partition
template <unsigned int Size, typename ParentT>
thread_block_tile<Size, ParentT> tiled_partition(const ParentT& g);
thread_group tiled_partition(const thread_group& parent, unsigned int tilesz);
The tiled_partition method is a collective operation that partitions the parent group into a one-dimensional, row-major, tiling of subgroups. A total of ((size(parent)/tilesz) subgroups will be created, therefore the parent group size must be evenly divisible by the Size. The allowed parent groups are thread_block or thread_block_tile.
The implementation may cause the calling thread to wait until all the members of the parent group have invoked the operation before resuming execution. Functionality is limited to native hardware sizes, 1/2/4/8/16/32 and the cg::size(parent) must be greater than the Size parameter. The templated version of tiled_partition supports 64/128/256/512 sizes as well, but some additional steps are required on Compute Capability 7.5 or lower, refer to Thread Block Tile for details.
Codegen Requirements: Compute Capability 5.0 minimum, C++11 for sizes larger than 32
Example:
/// The following code will create a 32-thread tile
thread_block block = this_thread_block();
thread_block_tile<32> tile32 = tiled_partition<32>(block);
We can partition each of these groups into even smaller groups, each of size 4 threads:
auto tile4 = tiled_partition<4>(tile32);
// or using a general group
// thread_group tile4 = tiled_partition(tile32, 4);
If, for instance, if we were to then include the following line of code:
if (tile4.thread_rank()==0) printf("Hello from tile4 rank 0\n");
then the statement would be printed by every fourth thread in the block: the threads of rank 0 in each tile4 group, which correspond to those threads with ranks 0,4,8,12,etc. in the block group.
8.5.2. labeled_partition
template <typename Label>
coalesced_group labeled_partition(const coalesced_group& g, Label label);
template <unsigned int Size, typename Label>
coalesced_group labeled_partition(const thread_block_tile<Size>& g, Label label);
The labeled_partition method is a collective operation that partitions the parent group into one-dimensional subgroups within which the threads are coalesced. The implementation will evaluate a condition label and assign threads that have the same value for label into the same group.
Label can be any integral type.
The implementation may cause the calling thread to wait until all the members of the parent group have invoked the operation before resuming execution.
Note: This functionality is still being evaluated and may slightly change in the future.
Codegen Requirements: Compute Capability 7.0 minimum, C++11
8.5.3. binary_partition
coalesced_group binary_partition(const coalesced_group& g, bool pred);
template <unsigned int Size>
coalesced_group binary_partition(const thread_block_tile<Size>& g, bool pred);
The binary_partition() method is a collective operation that partitions the parent group into one-dimensional subgroups within which the threads are coalesced. The implementation will evaluate a predicate and assign threads that have the same value into the same group. This is a specialized form of labeled_partition(), where the label can only be 0 or 1.
The implementation may cause the calling thread to wait until all the members of the parent group have invoked the operation before resuming execution.
Note: This functionality is still being evaluated and may slightly change in the future.
Codegen Requirements: Compute Capability 7.0 minimum, C++11
Example:
/// This example divides a 32-sized tile into a group with odd
/// numbers and a group with even numbers
_global__ void oddEven(int *inputArr) {
auto block = cg::this_thread_block();
auto tile32 = cg::tiled_partition<32>(block);
// inputArr contains random integers
int elem = inputArr[block.thread_rank()];
// after this, tile32 is split into 2 groups,
// a subtile where elem&1 is true and one where its false
auto subtile = cg::binary_partition(tile32, (elem & 1));
}
8.6. Group Collectives
Cooperative Groups library provides a set of collective operations that can be performed by a group of threads. These operations require participation of all threads in the specified group in order to complete the operation. All threads in the group need to pass the same values for corresponding arguments to each collective call, unless different values are explicitly allowed in the argument description. Otherwise the behavior of the call is undefined.
8.6.1. Synchronization
8.6.1.1. barrier_arrive and barrier_wait
T::arrival_token T::barrier_arrive();
void T::barrier_wait(T::arrival_token&&);
barrier_arrive and barrier_wait member functions provide a synchronization API similar to cuda::barrier (read more). Cooperative Groups automatically initializes the group barrier, but arrive and wait operations have an additional restriction resulting from collective nature of those operations: All threads in the group must arrive and wait at the barrier once per phase.
When barrier_arrive is called with a group, result of calling any collective operation or another barrier arrival with that group is undefined until completion of the barrier phase is observed with barrier_wait call. Threads blocked on barrier_wait might be released from the synchronization before other threads call barrier_wait, but only after all threads in the group called barrier_arrive.
Group type T can be any of the implicit groups.This allows threads to do independent work after they arrive and before they wait for the synchronization to resolve, allowing to hide some of the synchronization latency.
barrier_arrive returns an arrival_token object that must be passed into the corresponding barrier_wait. Token is consumed this way and can not be used for another barrier_wait call.
Example of barrier_arrive and barrier_wait used to synchronize initization of shared memory across the cluster:
#include <cooperative_groups.h>
using namespace cooperative_groups;
void __device__ init_shared_data(const thread_block& block, int *data);
void __device__ local_processing(const thread_block& block);
void __device__ process_shared_data(const thread_block& block, int *data);
__global__ void cluster_kernel() {
extern __shared__ int array[];
auto cluster = this_cluster();
auto block = this_thread_block();
// Use this thread block to initialize some shared state
init_shared_data(block, &array[0]);
auto token = cluster.barrier_arrive(); // Let other blocks know this block is running and data was initialized
// Do some local processing to hide the synchronization latency
local_processing(block);
// Map data in shared memory from the next block in the cluster
int *dsmem = cluster.map_shared_rank(&array[0], (cluster.block_rank() + 1) % cluster.num_blocks());
// Make sure all other blocks in the cluster are running and initialized shared data before accessing dsmem
cluster.barrier_wait(std::move(token));
// Consume data in distributed shared memory
process_shared_data(block, dsmem);
cluster.sync();
}
8.6.1.2. sync
static void T::sync();
template <typename T>
void sync(T& group);
sync synchronizes the threads named in the group. Group type T can be any of the existing group types, as all of them support synchronization. Its available as a member function in every group type or as a free function taking a group as parameter.
If the group is a grid_group or a multi_grid_group the kernel must have been launched using the appropriate cooperative launch APIs. Equivalent to T.barrier_wait(T.barrier_arrive()).
8.6.2. Data Transfer
8.6.2.1. memcpy_async
memcpy_async is a group-wide collective memcpy that utilizes hardware accelerated support for non-blocking memory transactions from global to shared memory. Given a set of threads named in the group, memcpy_async will move specified amount of bytes or elements of the input type through a single pipeline stage. Additionally for achieving best performance when using the memcpy_async API, an alignment of 16 bytes for both shared memory and global memory is required. It is important to note that while this is a memcpy in the general case, it is only asynchronous if the source is global memory and the destination is shared memory and both can be addressed with 16, 8, or 4 byte alignments. Asynchronously copied data should only be read following a call to wait or wait_prior which signals that the corresponding stage has completed moving data to shared memory.
Having to wait on all outstanding requests can lose some flexibility (but gain simplicity). In order to efficiently overlap data transfer and execution, its important to be able to kick off an N+1memcpy_async request while waiting on and operating on request N. To do so, use memcpy_async and wait on it using the collective stage-based wait_prior API. See wait and wait_prior for more details.
Usage 1
template <typename TyGroup, typename TyElem, typename TyShape>
void memcpy_async(
const TyGroup &group,
TyElem *__restrict__ _dst,
const TyElem *__restrict__ _src,
const TyShape &shape
);
Performs a copy of ``shape`` bytes.
Usage 2
template <typename TyGroup, typename TyElem, typename TyDstLayout, typename TySrcLayout>
void memcpy_async(
const TyGroup &group,
TyElem *__restrict__ dst,
const TyDstLayout &dstLayout,
const TyElem *__restrict__ src,
const TySrcLayout &srcLayout
);
Performs a copy of ``min(dstLayout, srcLayout)`` elements. If layouts are of type cuda::aligned_size_t<N>, both must specify the same alignment.
Errata
The memcpy_async API introduced in CUDA 11.1 with both src and dst input layouts, expects the layout to be provided in elements rather than bytes. The element type is inferred from TyElem and has the size sizeof(TyElem). If cuda::aligned_size_t<N> type is used as the layout, the number of elements specified times sizeof(TyElem) must be a multiple of N and it is recommended to use std::byte or char as the element type.
If specified shape or layout of the copy is of type cuda::aligned_size_t<N>, alignment will be guaranteed to be at least min(16, N). In that case both dst and src pointers need to be aligned to N bytes and the number of bytes copied needs to be a multiple of N.
Codegen Requirements: Compute Capability 5.0 minimum, Compute Capability 8.0 for asynchronicity, C++11
cooperative_groups/memcpy_async.h header needs to be included.
Example:
/// This example streams elementsPerThreadBlock worth of data from global memory
/// into a limited sized shared memory (elementsInShared) block to operate on.
#include <cooperative_groups.h>
#include <cooperative_groups/memcpy_async.h>
namespace cg = cooperative_groups;
__global__ void kernel(int* global_data) {
cg::thread_block tb = cg::this_thread_block();
const size_t elementsPerThreadBlock = 16 * 1024;
const size_t elementsInShared = 128;
__shared__ int local_smem[elementsInShared];
size_t copy_count;
size_t index = 0;
while (index < elementsPerThreadBlock) {
cg::memcpy_async(tb, local_smem, elementsInShared, global_data + index, elementsPerThreadBlock - index);
copy_count = min(elementsInShared, elementsPerThreadBlock - index);
cg::wait(tb);
// Work with local_smem
index += copy_count;
}
}
8.6.2.2. wait and wait_prior
template <typename TyGroup>
void wait(TyGroup & group);
template <unsigned int NumStages, typename TyGroup>
void wait_prior(TyGroup & group);
wait and wait_prior collectives allow to wait for memcpy_async copies to complete. wait blocks calling threads until all previous copies are done. wait_prior allows that the latest NumStages are still not done and waits for all the previous requests. So with N total copies requested, it waits until the first N-NumStages are done and the last NumStages might still be in progress. Both wait and wait_prior will synchronize the named group.
Codegen Requirements: Compute Capability 5.0 minimum, Compute Capability 8.0 for asynchronicity, C++11
cooperative_groups/memcpy_async.h header needs to be included.
Example:
/// This example streams elementsPerThreadBlock worth of data from global memory
/// into a limited sized shared memory (elementsInShared) block to operate on in
/// multiple (two) stages. As stage N is kicked off, we can wait on and operate on stage N-1.
#include <cooperative_groups.h>
#include <cooperative_groups/memcpy_async.h>
namespace cg = cooperative_groups;
__global__ void kernel(int* global_data) {
cg::thread_block tb = cg::this_thread_block();
const size_t elementsPerThreadBlock = 16 * 1024 + 64;
const size_t elementsInShared = 128;
__align__(16) __shared__ int local_smem[2][elementsInShared];
int stage = 0;
// First kick off an extra request
size_t copy_count = elementsInShared;
size_t index = copy_count;
cg::memcpy_async(tb, local_smem[stage], elementsInShared, global_data, elementsPerThreadBlock - index);
while (index < elementsPerThreadBlock) {
// Now we kick off the next request...
cg::memcpy_async(tb, local_smem[stage ^ 1], elementsInShared, global_data + index, elementsPerThreadBlock - index);
// ... but we wait on the one before it
cg::wait_prior<1>(tb);
// Its now available and we can work with local_smem[stage] here
// (...)
//
// Calculate the amount fo data that was actually copied, for the next iteration.
copy_count = min(elementsInShared, elementsPerThreadBlock - index);
index += copy_count;
// A cg::sync(tb) might be needed here depending on whether
// the work done with local_smem[stage] can release threads to race ahead or not
// Wrap to the next stage
stage ^= 1;
}
cg::wait(tb);
// The last local_smem[stage] can be handled here
}
8.6.3. Data Manipulation
8.6.3.1. reduce
template <typename TyGroup, typename TyArg, typename TyOp>
auto reduce(const TyGroup& group, TyArg&& val, TyOp&& op) -> decltype(op(val, val));
reduce performs a reduction operation on the data provided by each thread named in the group passed in. This takes advantage of hardware acceleration (on compute 80 and higher devices) for the arithmetic add, min, or max operations and the logical AND, OR, or XOR, as well as providing a software fallback on older generation hardware. Only 4B types are accelerated by hardware.
group: Valid group types are coalesced_group and thread_block_tile.
val: Any type that satisfies the below requirements:
Qualifies as trivially copyable i.e.
is_trivially_copyable<TyArg>::value == truesizeof(T) <= 32forcoalesced_groupand tiles of size lower or equal 32,sizeof(T) <= 8for larger tilesHas suitable arithmetic or comparative operators for the given function object.
Note: Different threads in the group can pass different values for this argument.
op: Valid function objects that will provide hardware acceleration with integral types are plus(), less(), greater(), bit_and(), bit_xor(), bit_or(). These must be constructed, hence the TyVal template argument is required, i.e. plus<int>(). Reduce also supports lambdas and other function objects that can be invoked using operator()
Asynchronous reduce
template <typename TyGroup, typename TyArg, typename TyAtomic, typename TyOp>
void reduce_update_async(const TyGroup& group, TyAtomic& atomic, TyArg&& val, TyOp&& op);
template <typename TyGroup, typename TyArg, typename TyAtomic, typename TyOp>
void reduce_store_async(const TyGroup& group, TyAtomic& atomic, TyArg&& val, TyOp&& op);
template <typename TyGroup, typename TyArg, typename TyOp>
void reduce_store_async(const TyGroup& group, TyArg* ptr, TyArg&& val, TyOp&& op);
*_async variants of the API are asynchronously calculating the result to either store to or update a specified destination by one of the participating threads, instead of returning it by each thread. To observe the effect of these asynchronous calls, calling group of threads or a larger group containing them need to be synchronized.
In case of the atomic store or update variant,
atomicargument can be either ofcuda::atomicorcuda::atomic_refavailable in CUDA C++ Standard Library. This variant of the API is available only on platforms and devices, where these types are supported by the CUDA C++ Standard Library. Result of the reduction is used to atomically update the atomic according to the specifiedop, eg. the result is atomically added to the atomic in case ofcg::plus(). Type held by theatomicmust match the type ofTyArg. Scope of the atomic must include all the threads in the group and if multiple groups are using the same atomic concurrently, scope must include all threads in all groups using it. Atomic update is performed with relaxed memory ordering.In case of the pointer store variant, result of the reduction will be weakly stored into the
dstpointer.
Codegen Requirements: Compute Capability 5.0 minimum, Compute Capability 8.0 for HW acceleration, C++11.
cooperative_groups/reduce.h header needs to be included.
Example of approximate standard deviation for integer vector:
#include <cooperative_groups.h>
#include <cooperative_groups/reduce.h>
namespace cg = cooperative_groups;
/// Calculate approximate standard deviation of integers in vec
__device__ int std_dev(const cg::thread_block_tile<32>& tile, int *vec, int length) {
int thread_sum = 0;
// calculate average first
for (int i = tile.thread_rank(); i < length; i += tile.num_threads()) {
thread_sum += vec[i];
}
// cg::plus<int> allows cg::reduce() to know it can use hardware acceleration for addition
int avg = cg::reduce(tile, thread_sum, cg::plus<int>()) / length;
int thread_diffs_sum = 0;
for (int i = tile.thread_rank(); i < length; i += tile.num_threads()) {
int diff = vec[i] - avg;
thread_diffs_sum += diff * diff;
}
// temporarily use floats to calculate the square root
float diff_sum = static_cast<float>(cg::reduce(tile, thread_diffs_sum, cg::plus<int>())) / length;
return static_cast<int>(sqrtf(diff_sum));
}
Example of block wide reduction:
#include <cooperative_groups.h>
#include <cooperative_groups/reduce.h>
namespace cg=cooperative_groups;
/// The following example accepts input in *A and outputs a result into *sum
/// It spreads the data equally within the block
__device__ void block_reduce(const int* A, int count, cuda::atomic<int, cuda::thread_scope_block>& total_sum) {
auto block = cg::this_thread_block();
auto tile = cg::tiled_partition<32>(block);
int thread_sum = 0;
// Stride loop over all values, each thread accumulates its part of the array.
for (int i = block.thread_rank(); i < count; i += block.size()) {
thread_sum += A[i];
}
// reduce thread sums across the tile, add the result to the atomic
// cg::plus<int> allows cg::reduce() to know it can use hardware acceleration for addition
cg::reduce_update_async(tile, total_sum, thread_sum, cg::plus<int>());
// synchronize the block, to ensure all async reductions are ready
block.sync();
}
8.6.3.2. Reduce Operators
Below are the prototypes of function objects for some of the basic operations that can be done with reduce
namespace cooperative_groups {
template <typename Ty>
struct cg::plus;
template <typename Ty>
struct cg::less;
template <typename Ty>
struct cg::greater;
template <typename Ty>
struct cg::bit_and;
template <typename Ty>
struct cg::bit_xor;
template <typename Ty>
struct cg::bit_or;
}
Reduce is limited to the information available to the implementation at compile time. Thus in order to make use of intrinsics introduced in CC 8.0, the cg:: namespace exposes several functional objects that mirror the hardware. These objects appear similar to those presented in the C++ STL, with the exception of less/greater. The reason for any difference from the STL is that these function objects are designed to actually mirror the operation of the hardware intrinsics.
Functional description:
cg::plus:Accepts two values and returns the sum of both using operator+.cg::less:Accepts two values and returns the lesser using operator<. This differs in that the lower value is returned rather than a Boolean.cg::greater:Accepts two values and returns the greater using operator<. This differs in that the greater value is returned rather than a Boolean.cg::bit_and:Accepts two values and returns the result of operator&.cg::bit_xor:Accepts two values and returns the result of operator^.cg::bit_or:Accepts two values and returns the result of operator|.
Example:
{
// cg::plus<int> is specialized within cg::reduce and calls __reduce_add_sync(...) on CC 8.0+
cg::reduce(tile, (int)val, cg::plus<int>());
// cg::plus<float> fails to match with an accelerator and instead performs a standard shuffle based reduction
cg::reduce(tile, (float)val, cg::plus<float>());
// While individual components of a vector are supported, reduce will not use hardware intrinsics for the following
// It will also be necessary to define a corresponding operator for vector and any custom types that may be used
int4 vec = {...};
cg::reduce(tile, vec, cg::plus<int4>())
// Finally lambdas and other function objects cannot be inspected for dispatch
// and will instead perform shuffle based reductions using the provided function object.
cg::reduce(tile, (int)val, [](int l, int r) -> int {return l + r;});
}
8.6.3.3. inclusive_scan and exclusive_scan
template <typename TyGroup, typename TyVal, typename TyFn>
auto inclusive_scan(const TyGroup& group, TyVal&& val, TyFn&& op) -> decltype(op(val, val));
template <typename TyGroup, typename TyVal>
TyVal inclusive_scan(const TyGroup& group, TyVal&& val);
template <typename TyGroup, typename TyVal, typename TyFn>
auto exclusive_scan(const TyGroup& group, TyVal&& val, TyFn&& op) -> decltype(op(val, val));
template <typename TyGroup, typename TyVal>
TyVal exclusive_scan(const TyGroup& group, TyVal&& val);
inclusive_scan and exclusive_scan performs a scan operation on the data provided by each thread named in the group passed in. Result for each thread is a reduction of data from threads with lower thread_rank than that thread in case of exclusive_scan. inclusive_scan result also includes the calling thread data in the reduction.
group: Valid group types are coalesced_group and thread_block_tile.
val: Any type that satisfies the below requirements:
Qualifies as trivially copyable i.e.
is_trivially_copyable<TyArg>::value == truesizeof(T) <= 32forcoalesced_groupand tiles of size lower or equal 32,sizeof(T) <= 8for larger tilesHas suitable arithmetic or comparative operators for the given function object.
Note: Different threads in the group can pass different values for this argument.
op: Function objects defined for convenience are plus(), less(), greater(), bit_and(), bit_xor(), bit_or() described in Reduce Operators. These must be constructed, hence the TyVal template argument is required, i.e. plus<int>(). inclusive_scan and exclusive_scan also supports lambdas and other function objects that can be invoked using operator(). Overloads without this argument use cg::plus<TyVal>().
Scan update
template <typename TyGroup, typename TyAtomic, typename TyVal, typename TyFn>
auto inclusive_scan_update(const TyGroup& group, TyAtomic& atomic, TyVal&& val, TyFn&& op) -> decltype(op(val, val));
template <typename TyGroup, typename TyAtomic, typename TyVal>
TyVal inclusive_scan_update(const TyGroup& group, TyAtomic& atomic, TyVal&& val);
template <typename TyGroup, typename TyAtomic, typename TyVal, typename TyFn>
auto exclusive_scan_update(const TyGroup& group, TyAtomic& atomic, TyVal&& val, TyFn&& op) -> decltype(op(val, val));
template <typename TyGroup, typename TyAtomic, typename TyVal>
TyVal exclusive_scan_update(const TyGroup& group, TyAtomic& atomic, TyVal&& val);
*_scan_update collectives take an additional argument atomic that can be either of cuda::atomic or cuda::atomic_ref available in CUDA C++ Standard Library. These variants of the API are available only on platforms and devices, where these types are supported by the CUDA C++ Standard Library. These variants will perform an update to the atomic according to op with value of the sum of input values of all threads in the group. Previous value of the atomic will be combined with the result of scan by each thread and returned. Type held by the atomic must match the type of TyVal. Scope of the atomic must include all the threads in the group and if multiple groups are using the same atomic concurrently, scope must include all threads in all groups using it. Atomic update is performed with relaxed memory ordering.
Following pseudocode illustrates how the update variant of scan works:
/*
inclusive_scan_update behaves as the following block,
except both reduce and inclusive_scan is calculated simultaneously.
auto total = reduce(group, val, op);
TyVal old;
if (group.thread_rank() == selected_thread) {
atomicaly {
old = atomic.load();
atomic.store(op(old, total));
}
}
old = group.shfl(old, selected_thread);
return op(inclusive_scan(group, val, op), old);
*/
Codegen Requirements: Compute Capability 5.0 minimum, C++11.
cooperative_groups/scan.h header needs to be included.
Example:
#include <stdio.h>
#include <cooperative_groups.h>
#include <cooperative_groups/scan.h>
namespace cg = cooperative_groups;
__global__ void kernel() {
auto thread_block = cg::this_thread_block();
auto tile = cg::tiled_partition<8>(thread_block);
unsigned int val = cg::inclusive_scan(tile, tile.thread_rank());
printf("%u: %u\n", tile.thread_rank(), val);
}
/* prints for each group:
0: 0
1: 1
2: 3
3: 6
4: 10
5: 15
6: 21
7: 28
*/
Example of stream compaction using exclusive_scan:
#include <cooperative_groups.h>
#include <cooperative_groups/scan.h>
namespace cg = cooperative_groups;
// put data from input into output only if it passes test_fn predicate
template<typename Group, typename Data, typename TyFn>
__device__ int stream_compaction(Group &g, Data *input, int count, TyFn&& test_fn, Data *output) {
int per_thread = count / g.num_threads();
int thread_start = min(g.thread_rank() * per_thread, count);
int my_count = min(per_thread, count - thread_start);
// get all passing items from my part of the input
// into a contagious part of the array and count them.
int i = thread_start;
while (i < my_count + thread_start) {
if (test_fn(input[i])) {
i++;
}
else {
my_count--;
input[i] = input[my_count + thread_start];
}
}
// scan over counts from each thread to calculate my starting
// index in the output
int my_idx = cg::exclusive_scan(g, my_count);
for (i = 0; i < my_count; ++i) {
output[my_idx + i] = input[thread_start + i];
}
// return the total number of items in the output
return g.shfl(my_idx + my_count, g.num_threads() - 1);
}
Example of dynamic buffer space allocation using exclusive_scan_update:
#include <cooperative_groups.h>
#include <cooperative_groups/scan.h>
namespace cg = cooperative_groups;
// Buffer partitioning is static to make the example easier to follow,
// but any arbitrary dynamic allocation scheme can be implemented by replacing this function.
__device__ int calculate_buffer_space_needed(cg::thread_block_tile<32>& tile) {
return tile.thread_rank() % 2 + 1;
}
__device__ int my_thread_data(int i) {
return i;
}
__global__ void kernel() {
__shared__ extern int buffer[];
__shared__ cuda::atomic<int, cuda::thread_scope_block> buffer_used;
auto block = cg::this_thread_block();
auto tile = cg::tiled_partition<32>(block);
buffer_used = 0;
block.sync();
// each thread calculates buffer size it needs
int buf_needed = calculate_buffer_space_needed(tile);
// scan over the needs of each thread, result for each thread is an offset
// of that thread’s part of the buffer. buffer_used is atomically updated with
// the sum of all thread's inputs, to correctly offset other tile’s allocations
int buf_offset =
cg::exclusive_scan_update(tile, buffer_used, buf_needed);
// each thread fills its own part of the buffer with thread specific data
for (int i = 0 ; i < buf_needed ; ++i) {
buffer[buf_offset + i] = my_thread_data(i);
}
block.sync();
// buffer_used now holds total amount of memory allocated
// buffer is {0, 0, 1, 0, 0, 1 ...};
}
8.6.4. Execution control
8.6.4.1. invoke_one and invoke_one_broadcast
template<typename Group, typename Fn, typename... Args>
void invoke_one(const Group& group, Fn&& fn, Args&&... args);
template<typename Group, typename Fn, typename... Args>
auto invoke_one_broadcast(const Group& group, Fn&& fn, Args&&... args) -> decltype(fn(args...));
invoke_one selects a single arbitrary thread from the calling group and uses that thread to call the supplied invocable fn with the supplied arguments args.
In case of invoke_one_broadcast the result of the call is also distributed to all threads in the group and returned from this collective.
Calling group can be synchronized with the selected thread before and/or after it calls the supplied invocable. It means that communication within the calling group is not allowed inside the supplied invocable body, otherwise forward progress is not guaranteed. Communication with threads outside of the calling group is allowed in the body of the supplied invocable. Thread selection mechanism is not guranteed to be deterministic.
On devices with Compute Capability 9.0 or higher hardware acceleration might be used to select the thread when called with explicit group types.
group: All group types are valid for invoke_one, coalesced_group and thread_block_tile are valid for invoke_one_broadcast.
fn: Function or object that can be invoked using operator().
args: Parameter pack of types matching types of parameters of the supplied invocable fn.
In case of invoke_one_broadcast the return type of the supplied invocable fn must satisfy the below requirements:
Qualifies as trivially copyable i.e.
is_trivially_copyable<T>::value == truesizeof(T) <= 32forcoalesced_groupand tiles of size lower or equal 32,sizeof(T) <= 8for larger tiles
Codegen Requirements: Compute Capability 5.0 minimum, Compute Capability 9.0 for hardware acceleration, C++11.
Aggregated atomic example from Discovery pattern section re-written to use invoke_one_broadcast:
#include <cooperative_groups.h>
#include <cuda/atomic>
namespace cg = cooperative_groups;
template<cuda::thread_scope Scope>
__device__ unsigned int atomicAddOneRelaxed(cuda::atomic<unsigned int, Scope>& atomic) {
auto g = cg::coalesced_threads();
auto prev = cg::invoke_one_broadcast(g, [&] () {
return atomic.fetch_add(g.num_threads(), cuda::memory_order_relaxed);
});
return prev + g.thread_rank();
}
8.7. Grid Synchronization
Prior to the introduction of Cooperative Groups, the CUDA programming model only allowed synchronization between thread blocks at a kernel completion boundary. The kernel boundary carries with it an implicit invalidation of state, and with it, potential performance implications.
For example, in certain use cases, applications have a large number of small kernels, with each kernel representing a stage in a processing pipeline. The presence of these kernels is required by the current CUDA programming model to ensure that the thread blocks operating on one pipeline stage have produced data before the thread block operating on the next pipeline stage is ready to consume it. In such cases, the ability to provide global inter thread block synchronization would allow the application to be restructured to have persistent thread blocks, which are able to synchronize on the device when a given stage is complete.
To synchronize across the grid, from within a kernel, you would simply use the grid.sync() function:
grid_group grid = this_grid();
grid.sync();
And when launching the kernel it is necessary to use, instead of the <<<...>>> execution configuration syntax, the cudaLaunchCooperativeKernel CUDA runtime launch API or the CUDA driver equivalent.
Example:
To guarantee co-residency of the thread blocks on the GPU, the number of blocks launched needs to be carefully considered. For example, as many blocks as there are SMs can be launched as follows:
int dev = 0;
cudaDeviceProp deviceProp;
cudaGetDeviceProperties(&deviceProp, dev);
// initialize, then launch
cudaLaunchCooperativeKernel((void*)my_kernel, deviceProp.multiProcessorCount, numThreads, args);
Alternatively, you can maximize the exposed parallelism by calculating how many blocks can fit simultaneously per-SM using the occupancy calculator as follows:
/// This will launch a grid that can maximally fill the GPU, on the default stream with kernel arguments
int numBlocksPerSm = 0;
// Number of threads my_kernel will be launched with
int numThreads = 128;
cudaDeviceProp deviceProp;
cudaGetDeviceProperties(&deviceProp, dev);
cudaOccupancyMaxActiveBlocksPerMultiprocessor(&numBlocksPerSm, my_kernel, numThreads, 0);
// launch
void *kernelArgs[] = { /* add kernel args */ };
dim3 dimBlock(numThreads, 1, 1);
dim3 dimGrid(deviceProp.multiProcessorCount*numBlocksPerSm, 1, 1);
cudaLaunchCooperativeKernel((void*)my_kernel, dimGrid, dimBlock, kernelArgs);
It is good practice to first ensure the device supports cooperative launches by querying the device attribute cudaDevAttrCooperativeLaunch:
int dev = 0;
int supportsCoopLaunch = 0;
cudaDeviceGetAttribute(&supportsCoopLaunch, cudaDevAttrCooperativeLaunch, dev);
which will set supportsCoopLaunch to 1 if the property is supported on device 0. Only devices with compute capability of 6.0 and higher are supported. In addition, you need to be running on either of these:
The Linux platform without MPS
The Linux platform with MPS and on a device with compute capability 7.0 or higher
The latest Windows platform
8.8. Multi-Device Synchronization
In order to enable synchronization across multiple devices with Cooperative Groups, use of the cudaLaunchCooperativeKernelMultiDevice CUDA API is required. This, a significant departure from existing CUDA APIs, will allow a single host thread to launch a kernel across multiple devices. In addition to the constraints and guarantees made by cudaLaunchCooperativeKernel, this API has additional semantics:
This API will ensure that a launch is atomic, i.e. if the API call succeeds, then the provided number of thread blocks will launch on all specified devices.
The functions launched via this API must be identical. No explicit checks are done by the driver in this regard because it is largely not feasible. It is up to the application to ensure this.
No two entries in the provided
cudaLaunchParamsmay map to the same device.All devices being targeted by this launch must be of the same compute capability - major and minor versions.
The block size, grid size and amount of shared memory per grid must be the same across all devices. Note that this means the maximum number of blocks that can be launched per device will be limited by the device with the least number of SMs.
Any user defined
__device__,__constant__or__managed__device global variables present in the module that owns the CUfunction being launched are independently instantiated on every device. The user is responsible for initializing such device global variables appropriately.
Deprecation Notice: cudaLaunchCooperativeKernelMultiDevice has been deprecated in CUDA 11.3 for all devices. Example of an alternative approach can be found in the multi device conjugate gradient sample.
Optimal performance in multi-device synchronization is achieved by enabling peer access via cuCtxEnablePeerAccess or cudaDeviceEnablePeerAccess for all participating devices.
The launch parameters should be defined using an array of structs (one per device), and launched with cudaLaunchCooperativeKernelMultiDevice
Example:
cudaDeviceProp deviceProp;
cudaGetDeviceCount(&numGpus);
// Per device launch parameters
cudaLaunchParams *launchParams = (cudaLaunchParams*)malloc(sizeof(cudaLaunchParams) * numGpus);
cudaStream_t *streams = (cudaStream_t*)malloc(sizeof(cudaStream_t) * numGpus);
// The kernel arguments are copied over during launch
// Its also possible to have individual copies of kernel arguments per device, but
// the signature and name of the function/kernel must be the same.
void *kernelArgs[] = { /* Add kernel arguments */ };
for (int i = 0; i < numGpus; i++) {
cudaSetDevice(i);
// Per device stream, but its also possible to use the default NULL stream of each device
cudaStreamCreate(&streams[i]);
// Loop over other devices and cudaDeviceEnablePeerAccess to get a faster barrier implementation
}
// Since all devices must be of the same compute capability and have the same launch configuration
// it is sufficient to query device 0 here
cudaGetDeviceProperties(&deviceProp[i], 0);
dim3 dimBlock(numThreads, 1, 1);
dim3 dimGrid(deviceProp.multiProcessorCount, 1, 1);
for (int i = 0; i < numGpus; i++) {
launchParamsList[i].func = (void*)my_kernel;
launchParamsList[i].gridDim = dimGrid;
launchParamsList[i].blockDim = dimBlock;
launchParamsList[i].sharedMem = 0;
launchParamsList[i].stream = streams[i];
launchParamsList[i].args = kernelArgs;
}
cudaLaunchCooperativeKernelMultiDevice(launchParams, numGpus);
Also, as with grid-wide synchronization, the resulting device code looks very similar:
multi_grid_group multi_grid = this_multi_grid();
multi_grid.sync();
However, the code needs to be compiled in separate compilation by passing -rdc=true to nvcc.
It is good practice to first ensure the device supports multi-device cooperative launches by querying the device attribute cudaDevAttrCooperativeMultiDeviceLaunch:
int dev = 0;
int supportsMdCoopLaunch = 0;
cudaDeviceGetAttribute(&supportsMdCoopLaunch, cudaDevAttrCooperativeMultiDeviceLaunch, dev);
which will set supportsMdCoopLaunch to 1 if the property is supported on device 0. Only devices with compute capability of 6.0 and higher are supported. In addition, you need to be running on the Linux platform (without MPS) or on current versions of Windows with the device in TCC mode.
See the cudaLaunchCooperativeKernelMultiDevice API documentation for more information.
9. CUDA Dynamic Parallelism
9.1. Introduction
9.1.1. Overview
Dynamic Parallelism is an extension to the CUDA programming model enabling a CUDA kernel to create and synchronize with new work directly on the GPU. The creation of parallelism dynamically at whichever point in a program that it is needed offers exciting capabilities.
The ability to create work directly from the GPU can reduce the need to transfer execution control and data between host and device, as launch configuration decisions can now be made at runtime by threads executing on the device. Additionally, data-dependent parallel work can be generated inline within a kernel at run-time, taking advantage of the GPU’s hardware schedulers and load balancers dynamically and adapting in response to data-driven decisions or workloads. Algorithms and programming patterns that had previously required modifications to eliminate recursion, irregular loop structure, or other constructs that do not fit a flat, single-level of parallelism may more transparently be expressed.
This document describes the extended capabilities of CUDA which enable Dynamic Parallelism, including the modifications and additions to the CUDA programming model necessary to take advantage of these, as well as guidelines and best practices for exploiting this added capacity.
Dynamic Parallelism is only supported by devices of compute capability 3.5 and higher.
9.1.2. Glossary
Definitions for terms used in this guide.
- Grid
-
A Grid is a collection of Threads. Threads in a Grid execute a Kernel Function and are divided into Thread Blocks.
- Thread Block
-
A Thread Block is a group of threads which execute on the same multiprocessor (SM). Threads within a Thread Block have access to shared memory and can be explicitly synchronized.
- Kernel Function
-
A Kernel Function is an implicitly parallel subroutine that executes under the CUDA execution and memory model for every Thread in a Grid.
- Host
-
The Host refers to the execution environment that initially invoked CUDA. Typically the thread running on a system’s CPU processor.
- Parent
-
A Parent Thread, Thread Block, or Grid is one that has launched new grid(s), the Child Grid(s). The Parent is not considered completed until all of its launched Child Grids have also completed.
- Child
-
A Child thread, block, or grid is one that has been launched by a Parent grid. A Child grid must complete before the Parent Thread, Thread Block, or Grid are considered complete.
- Thread Block Scope
-
Objects with Thread Block Scope have the lifetime of a single Thread Block. They only have defined behavior when operated on by Threads in the Thread Block that created the object and are destroyed when the Thread Block that created them is complete.
- Device Runtime
-
The Device Runtime refers to the runtime system and APIs available to enable Kernel Functions to use Dynamic Parallelism.
9.2. Execution Environment and Memory Model
9.2.1. Execution Environment
The CUDA execution model is based on primitives of threads, thread blocks, and grids, with kernel functions defining the program executed by individual threads within a thread block and grid. When a kernel function is invoked the grid’s properties are described by an execution configuration, which has a special syntax in CUDA. Support for dynamic parallelism in CUDA extends the ability to configure, launch, and implicitly synchronize upon new grids to threads that are running on the device.
9.2.1.1. Parent and Child Grids
A device thread that configures and launches a new grid belongs to the parent grid, and the grid created by the invocation is a child grid.
The invocation and completion of child grids is properly nested, meaning that the parent grid is not considered complete until all child grids created by its threads have completed, and the runtime guarantees an implicit synchronization between the parent and child.
Figure 26 Parent-Child Launch Nesting
9.2.1.2. Scope of CUDA Primitives
On both host and device, the CUDA runtime offers an API for launching kernels and for tracking dependencies between launches via streams and events. On the host system, the state of launches and the CUDA primitives referencing streams and events are shared by all threads within a process; however processes execute independently and may not share CUDA objects.
On the device, launched kernels and CUDA objects are visible to all threads in a grid. This means, for example, that a stream may be created by one thread and used by any other thread in the grid.
9.2.1.3. Synchronization
Warning
Explicit synchronization with child kernels from a parent block (i.e. using cudaDeviceSynchronize() in device code) is deprecated in CUDA 11.6 and removed for compute_90+ compilation. For compute capability < 9.0, compile-time opt-in by specifying -DCUDA_FORCE_CDP1_IF_SUPPORTED is required to continue using cudaDeviceSynchronize() in device code. Note that this is slated for full removal in a future CUDA release.
CUDA runtime operations from any thread, including kernel launches, are visible across all the threads in a grid. This means that an invoking thread in the parent grid may perform synchronization to control the launch order of grids launched by any thread in the grid on streams created by any thread in the grid. Execution of a grid is not considered complete until all launches by all threads in the grid have completed. If all threads in a grid exit before all child launches have completed, an implicit synchronization operation will automatically be triggered.
9.2.1.4. Streams and Events
CUDA Streams and Events allow control over dependencies between grid launches: grids launched into the same stream execute in-order, and events may be used to create dependencies between streams. Streams and events created on the device serve this exact same purpose.
Streams and events created within a grid exist within grid scope, but have undefined behavior when used outside of the grid where they were created. As described above, all work launched by a grid is implicitly synchronized when the grid exits; work launched into streams is included in this, with all dependencies resolved appropriately. The behavior of operations on a stream that has been modified outside of grid scope is undefined.
Streams and events created on the host have undefined behavior when used within any kernel, just as streams and events created by a parent grid have undefined behavior if used within a child grid.
9.2.1.5. Ordering and Concurrency
The ordering of kernel launches from the device runtime follows CUDA Stream ordering semantics. Within a grid, all kernel launches into the same stream (with the exception of the fire-and-forget stream discussed later) are executed in-order. With multiple threads in the same grid launching into the same stream, the ordering within the stream is dependent on the thread scheduling within the grid, which may be controlled with synchronization primitives such as __syncthreads().
Note that while named streams are shared by all threads within a grid, the implicit NULL stream is only shared by all threads within a thread block. If multiple threads in a thread block launch into the implicit stream, then these launches will be executed in-order. If multiple threads in different thread blocks launch into the implicit stream, then these launches may be executed concurrently. If concurrency is desired for launches by multiple threads within a thread block, explicit named streams should be used.
Dynamic Parallelism enables concurrency to be expressed more easily within a program; however, the device runtime introduces no new concurrency guarantees within the CUDA execution model. There is no guarantee of concurrent execution between any number of different thread blocks on a device.
The lack of concurrency guarantee extends to a parent grid and their child grids. When a parent grid launches a child grid, the child may start to execute once stream dependencies are satisfied and hardware resources are available to host the child, but is not guaranteed to begin execution until the parent grid reaches an implicit synchronization point.
While concurrency will often easily be achieved, it may vary as a function of device configuration, application workload, and runtime scheduling. It is therefore unsafe to depend upon any concurrency between different thread blocks.
9.2.1.6. Device Management
There is no multi-GPU support from the device runtime; the device runtime is only capable of operating on the device upon which it is currently executing. It is permitted, however, to query properties for any CUDA capable device in the system.
9.2.2. Memory Model
Parent and child grids share the same global and constant memory storage, but have distinct local and shared memory.
9.2.2.1. Coherence and Consistency
9.2.2.1.1. Global Memory
Parent and child grids have coherent access to global memory, with weak consistency guarantees between child and parent. There is only one point of time in the execution of a child grid when its view of memory is fully consistent with the parent thread: at the point when the child grid is invoked by the parent.
All global memory operations in the parent thread prior to the child grid’s invocation are visible to the child grid. With the removal of cudaDeviceSynchronize(), it is no longer possible to access the modifications made by the threads in the child grid from the parent grid. The only way to access the modifications made by the threads in the child grid before the parent grid exits is via a kernel launched into the cudaStreamTailLaunch stream.
In the following example, the child grid executing child_launch is only guaranteed to see the modifications to data made before the child grid was launched. Since thread 0 of the parent is performing the launch, the child will be consistent with the memory seen by thread 0 of the parent. Due to the first __syncthreads() call, the child will see data[0]=0, data[1]=1, …, data[255]=255 (without the __syncthreads() call, only data[0]=0 would be guaranteed to be seen by the child). The child grid is only guaranteed to return at an implicit synchronization. This means that the modifications made by the threads in the child grid are never guaranteed to become available to the parent grid. To access modifications made by child_launch, a tail_launch kernel is launched into the cudaStreamTailLaunch stream.
__global__ void tail_launch(int *data) {
data[threadIdx.x] = data[threadIdx.x]+1;
}
__global__ void child_launch(int *data) {
data[threadIdx.x] = data[threadIdx.x]+1;
}
__global__ void parent_launch(int *data) {
data[threadIdx.x] = threadIdx.x;
__syncthreads();
if (threadIdx.x == 0) {
child_launch<<< 1, 256 >>>(data);
tail_launch<<< 1, 256, 0, cudaStreamTailLaunch >>>(data);
}
}
void host_launch(int *data) {
parent_launch<<< 1, 256 >>>(data);
}
9.2.2.1.2. Zero Copy Memory
Zero-copy system memory has identical coherence and consistency guarantees to global memory, and follows the semantics detailed above. A kernel may not allocate or free zero-copy memory, but may use pointers to zero-copy passed in from the host program.
9.2.2.1.3. Constant Memory
Constants may not be modified from the device. They may only be modified from the host, but the behavior of modifying a constant from the host while there is a concurrent grid that access that constant at any point during its lifetime is undefined.
9.2.2.1.5. Local Memory
Local memory is private storage for an executing thread, and is not visible outside of that thread. It is illegal to pass a pointer to local memory as a launch argument when launching a child kernel. The result of dereferencing such a local memory pointer from a child will be undefined.
For example the following is illegal, with undefined behavior if x_array is accessed by child_launch:
int x_array[10]; // Creates x_array in parent's local memory
child_launch<<< 1, 1 >>>(x_array);
It is sometimes difficult for a programmer to be aware of when a variable is placed into local memory by the compiler. As a general rule, all storage passed to a child kernel should be allocated explicitly from the global-memory heap, either with cudaMalloc(), new() or by declaring __device__ storage at global scope. For example:
// Correct - "value" is global storage
__device__ int value;
__device__ void x() {
value = 5;
child<<< 1, 1 >>>(&value);
}
// Invalid - "value" is local storage
__device__ void y() {
int value = 5;
child<<< 1, 1 >>>(&value);
}
9.2.2.1.6. Texture Memory
Writes to the global memory region over which a texture is mapped are incoherent with respect to texture accesses. Coherence for texture memory is enforced at the invocation of a child grid and when a child grid completes. This means that writes to memory prior to a child kernel launch are reflected in texture memory accesses of the child. Similarly to Global Memory above, writes to memory by a child are never guaranteed to be reflected in the texture memory accesses by a parent. The only way to access the modifications made by the threads in the child grid before the parent grid exits is via a kernel launched into the cudaStreamTailLaunch stream. Concurrent accesses by parent and child may result in inconsistent data.
9.3. Programming Interface
9.3.1. CUDA C++ Reference
This section describes changes and additions to the CUDA C++ language extensions for supporting Dynamic Parallelism.
The language interface and API available to CUDA kernels using CUDA C++ for Dynamic Parallelism, referred to as the Device Runtime, is substantially like that of the CUDA Runtime API available on the host. Where possible the syntax and semantics of the CUDA Runtime API have been retained in order to facilitate ease of code reuse for routines that may run in either the host or device environments.
As with all code in CUDA C++, the APIs and code outlined here is per-thread code. This enables each thread to make unique, dynamic decisions regarding what kernel or operation to execute next. There are no synchronization requirements between threads within a block to execute any of the provided device runtime APIs, which enables the device runtime API functions to be called in arbitrarily divergent kernel code without deadlock.
9.3.1.1. Device-Side Kernel Launch
Kernels may be launched from the device using the standard CUDA <<< >>> syntax:
kernel_name<<< Dg, Db, Ns, S >>>([kernel arguments]);
Dgis of typedim3and specifies the dimensions and size of the gridDbis of typedim3and specifies the dimensions and size of each thread blockNsis of typesize_tand specifies the number of bytes of shared memory that is dynamically allocated per thread block for this call in addition to statically allocated memory.Nsis an optional argument that defaults to 0.Sis of typecudaStream_tand specifies the stream associated with this call. The stream must have been allocated in the same grid where the call is being made.Sis an optional argument that defaults to the NULL stream.
9.3.1.1.1. Launches are Asynchronous
Identical to host-side launches, all device-side kernel launches are asynchronous with respect to the launching thread. That is to say, the <<<>>> launch command will return immediately and the launching thread will continue to execute until it hits an implicit launch-synchronization point (such as at a kernel launched into the cudaStreamTailLaunch stream).
The child grid launch is posted to the device and will execute independently of the parent thread. The child grid may begin execution at any time after launch, but is not guaranteed to begin execution until the launching thread reaches an implicit launch-synchronization point.
9.3.1.1.2. Launch Environment Configuration
All global device configuration settings (for example, shared memory and L1 cache size as returned from cudaDeviceGetCacheConfig(), and device limits returned from cudaDeviceGetLimit()) will be inherited from the parent. Likewise, device limits such as stack size will remain as-configured.
For host-launched kernels, per-kernel configurations set from the host will take precedence over the global setting. These configurations will be used when the kernel is launched from the device as well. It is not possible to reconfigure a kernel’s environment from the device.
9.3.1.2. Streams
Both named and unnamed (NULL) streams are available from the device runtime. Named streams may be used by any thread within a grid, but stream handles may not be passed to other child/parent kernels. In other words, a stream should be treated as private to the grid in which it is created.
Similar to host-side launch, work launched into separate streams may run concurrently, but actual concurrency is not guaranteed. Programs that depend upon concurrency between child kernels are not supported by the CUDA programming model and will have undefined behavior.
The host-side NULL stream’s cross-stream barrier semantic is not supported on the device (see below for details). In order to retain semantic compatibility with the host runtime, all device streams must be created using the cudaStreamCreateWithFlags() API, passing the cudaStreamNonBlocking flag. The cudaStreamCreate() call is a host-runtime- only API and will fail to compile for the device.
As cudaStreamSynchronize() and cudaStreamQuery() are unsupported by the device runtime, a kernel launched into the cudaStreamTailLaunch stream should be used instead when the application needs to know that stream-launched child kernels have completed.
9.3.1.2.1. The Implicit (NULL) Stream
Within a host program, the unnamed (NULL) stream has additional barrier synchronization semantics with other streams (see Default Stream for details). The device runtime offers a single implicit, unnamed stream shared between all threads in a thread block, but as all named streams must be created with the cudaStreamNonBlocking flag, work launched into the NULL stream will not insert an implicit dependency on pending work in any other streams (including NULL streams of other thread blocks).
9.3.1.2.2. The Fire-and-Forget Stream
The fire-and-forget named stream (cudaStreamFireAndForget) allows the user to launch fire-and-forget work with less boilerplate and without stream tracking overhead. It is functionally identical to, but faster than, creating a new stream per launch, and launching into that stream.
Fire-and-forget launches are immediately scheduled for launch without any dependency on the completion of previously launched grids. No other grid launches can depend on the completion of a fire-and-forget launch, except through the implicit synchronization at the end of the parent grid. So a tail launch or the next grid in parent grid’s stream won’t launch before a parent grid’s fire-and-forget work has completed.
// In this example, C2's launch will not wait for C1's completion
__global__ void P( ... ) {
C1<<< ... , cudaStreamFireAndForget >>>( ... );
C2<<< ... , cudaStreamFireAndForget >>>( ... );
}
The fire-and-forget stream cannot be used to record or wait on events. Attempting to do so results in cudaErrorInvalidValue. The fire-and-forget stream is not supported when compiled with CUDA_FORCE_CDP1_IF_SUPPORTED defined. Fire-and-forget stream usage requires compilation to be in 64-bit mode.
9.3.1.2.3. The Tail Launch Stream
The tail launch named stream (cudaStreamTailLaunch) allows a grid to schedule a new grid for launch after its completion. It should be possible to to use a tail launch to achieve the same functionality as a cudaDeviceSynchronize() in most cases.
Each grid has its own tail launch stream. All non-tail launch work launched by a grid is implicitly synchronized before the tail stream is kicked off. I.e. A parent grid’s tail launch does not launch until the parent grid and all work launched by the parent grid to ordinary streams or per-thread or fire-and-forget streams have completed. If two grids are launched to the same grid’s tail launch stream, the later grid does not launch until the earlier grid and all its descendent work has completed.
// In this example, C2 will only launch after C1 completes.
__global__ void P( ... ) {
C1<<< ... , cudaStreamTailLaunch >>>( ... );
C2<<< ... , cudaStreamTailLaunch >>>( ... );
}
Grids launched into the tail launch stream will not launch until the completion of all work by the parent grid, including all other grids (and their descendants) launched by the parent in all non-tail launched streams, including work executed or launched after the tail launch.
// In this example, C will only launch after all X, F and P complete.
__global__ void P( ... ) {
C<<< ... , cudaStreamTailLaunch >>>( ... );
X<<< ... , cudaStreamPerThread >>>( ... );
F<<< ... , cudaStreamFireAndForget >>>( ... )
}
The next grid in the parent grid’s stream will not be launched before a parent grid’s tail launch work has completed. In other words, the tail launch stream behaves as if it were inserted between its parent grid and the next grid in its parent grid’s stream.
// In this example, P2 will only launch after C completes.
__global__ void P1( ... ) {
C<<< ... , cudaStreamTailLaunch >>>( ... );
}
__global__ void P2( ... ) {
}
int main ( ... ) {
...
P1<<< ... >>>( ... );
P2<<< ... >>>( ... );
...
}
Each grid only gets one tail launch stream. To tail launch concurrent grids, it can be done like the example below.
// In this example, C1 and C2 will launch concurrently after P's completion
__global__ void T( ... ) {
C1<<< ... , cudaStreamFireAndForget >>>( ... );
C2<<< ... , cudaStreamFireAndForget >>>( ... );
}
__global__ void P( ... ) {
...
T<<< ... , cudaStreamTailLaunch >>>( ... );
}
The tail launch stream cannot be used to record or wait on events. Attempting to do so results in cudaErrorInvalidValue. The tail launch stream is not supported when compiled with CUDA_FORCE_CDP1_IF_SUPPORTED defined. Tail launch stream usage requires compilation to be in 64-bit mode.
9.3.1.3. Events
Only the inter-stream synchronization capabilities of CUDA events are supported. This means that cudaStreamWaitEvent() is supported, but cudaEventSynchronize(), cudaEventElapsedTime(), and cudaEventQuery() are not. As cudaEventElapsedTime() is not supported, cudaEvents must be created via cudaEventCreateWithFlags(), passing the cudaEventDisableTiming flag.
As with named streams, event objects may be shared between all threads within the grid which created them but are local to that grid and may not be passed to other kernels. Event handles are not guaranteed to be unique between grids, so using an event handle within a grid that did not create it will result in undefined behavior.
9.3.1.4. Synchronization
It is up to the program to perform sufficient inter-thread synchronization, for example via a CUDA Event, if the calling thread is intended to synchronize with child grids invoked from other threads.
As it is not possible to explicitly synchronize child work from a parent thread, there is no way to guarantee that changes occuring in child grids are visible to threads within the parent grid.
9.3.1.5. Device Management
Only the device on which a kernel is running will be controllable from that kernel. This means that device APIs such as cudaSetDevice() are not supported by the device runtime. The active device as seen from the GPU (returned from cudaGetDevice()) will have the same device number as seen from the host system. The cudaDeviceGetAttribute() call may request information about another device as this API allows specification of a device ID as a parameter of the call. Note that the catch-all cudaGetDeviceProperties() API is not offered by the device runtime - properties must be queried individually.
9.3.1.6. Memory Declarations
9.3.1.6.1. Device and Constant Memory
Memory declared at file scope with __device__ or __constant__ memory space specifiers behaves identically when using the device runtime. All kernels may read or write device variables, whether the kernel was initially launched by the host or device runtime. Equivalently, all kernels will have the same view of __constant__s as declared at the module scope.
9.3.1.6.2. Textures and Surfaces
CUDA supports dynamically created texture and surface objects14, where a texture object may be created on the host, passed to a kernel, used by that kernel, and then destroyed from the host. The device runtime does not allow creation or destruction of texture or surface objects from within device code, but texture and surface objects created from the host may be used and passed around freely on the device. Regardless of where they are created, dynamically created texture objects are always valid and may be passed to child kernels from a parent.
Note
The device runtime does not support legacy module-scope (i.e., Fermi-style) textures and surfaces within a kernel launched from the device. Module-scope (legacy) textures may be created from the host and used in device code as for any kernel, but may only be used by a top-level kernel (i.e., the one which is launched from the host).
9.3.1.6.4. Symbol Addresses
Device-side symbols (i.e., those marked __device__) may be referenced from within a kernel simply via the & operator, as all global-scope device variables are in the kernel’s visible address space. This also applies to __constant__ symbols, although in this case the pointer will reference read-only data.
Given that device-side symbols can be referenced directly, those CUDA runtime APIs which reference symbols (e.g., cudaMemcpyToSymbol() or cudaGetSymbolAddress()) are redundant and hence not supported by the device runtime. Note this implies that constant data cannot be altered from within a running kernel, even ahead of a child kernel launch, as references to __constant__ space are read-only.
9.3.1.7. API Errors and Launch Failures
As usual for the CUDA runtime, any function may return an error code. The last error code returned is recorded and may be retrieved via the cudaGetLastError() call. Errors are recorded per-thread, so that each thread can identify the most recent error that it has generated. The error code is of type cudaError_t.
Similar to a host-side launch, device-side launches may fail for many reasons (invalid arguments, etc). The user must call cudaGetLastError() to determine if a launch generated an error, however lack of an error after launch does not imply the child kernel completed successfully.
For device-side exceptions, e.g., access to an invalid address, an error in a child grid will be returned to the host.
9.3.1.7.1. Launch Setup APIs
Kernel launch is a system-level mechanism exposed through the device runtime library, and as such is available directly from PTX via the underlying cudaGetParameterBuffer() and cudaLaunchDevice() APIs. It is permitted for a CUDA application to call these APIs itself, with the same requirements as for PTX. In both cases, the user is then responsible for correctly populating all necessary data structures in the correct format according to specification. Backwards compatibility is guaranteed in these data structures.
As with host-side launch, the device-side operator <<<>>> maps to underlying kernel launch APIs. This is so that users targeting PTX will be able to enact a launch, and so that the compiler front-end can translate <<<>>> into these calls.
Runtime API Launch Functions |
Description of Difference From Host Runtime Behaviour (behavior is identical if no description) |
|---|---|
|
Generated automatically from |
|
Generated automatically from |
The APIs for these launch functions are different to those of the CUDA Runtime API, and are defined as follows:
extern device cudaError_t cudaGetParameterBuffer(void **params);
extern __device__ cudaError_t cudaLaunchDevice(void *kernel,
void *params, dim3 gridDim,
dim3 blockDim,
unsigned int sharedMemSize = 0,
cudaStream_t stream = 0);
9.3.1.8. API Reference
The portions of the CUDA Runtime API supported in the device runtime are detailed here. Host and device runtime APIs have identical syntax; semantics are the same except where indicated. The following table provides an overview of the API relative to the version available from the host.
Runtime API Functions |
Details |
|---|---|
|
|
|
|
|
Last error is per-thread state, not per-block state |
|
|
|
|
|
|
|
Will return attributes for any device |
|
Always returns current device ID as would be seen from host |
|
Must pass |
|
|
|
|
|
Must pass |
|
|
|
|
|
|
|
Notes about all
|
|
|
|
|
|
|
|
|
|
|
|
|
|
May not call |
|
|
|
|
|
|
|
9.3.2. Device-side Launch from PTX
This section is for the programming language and compiler implementers who target Parallel Thread Execution (PTX) and plan to support Dynamic Parallelism in their language. It provides the low-level details related to supporting kernel launches at the PTX level.
9.3.2.1. Kernel Launch APIs
Device-side kernel launches can be implemented using the following two APIs accessible from PTX: cudaLaunchDevice() and cudaGetParameterBuffer(). cudaLaunchDevice() launches the specified kernel with the parameter buffer that is obtained by calling cudaGetParameterBuffer() and filled with the parameters to the launched kernel. The parameter buffer can be NULL, i.e., no need to invoke cudaGetParameterBuffer(), if the launched kernel does not take any parameters.
9.3.2.1.1. cudaLaunchDevice
At the PTX level, cudaLaunchDevice()needs to be declared in one of the two forms shown below before it is used.
// PTX-level Declaration of cudaLaunchDevice() when .address_size is 64
.extern .func(.param .b32 func_retval0) cudaLaunchDevice
(
.param .b64 func,
.param .b64 parameterBuffer,
.param .align 4 .b8 gridDimension[12],
.param .align 4 .b8 blockDimension[12],
.param .b32 sharedMemSize,
.param .b64 stream
)
;
The CUDA-level declaration below is mapped to one of the aforementioned PTX-level declarations and is found in the system header file cuda_device_runtime_api.h. The function is defined in the cudadevrt system library, which must be linked with a program in order to use device-side kernel launch functionality.
// CUDA-level declaration of cudaLaunchDevice()
extern "C" __device__
cudaError_t cudaLaunchDevice(void *func, void *parameterBuffer,
dim3 gridDimension, dim3 blockDimension,
unsigned int sharedMemSize,
cudaStream_t stream);
The first parameter is a pointer to the kernel to be is launched, and the second parameter is the parameter buffer that holds the actual parameters to the launched kernel. The layout of the parameter buffer is explained in Parameter Buffer Layout, below. Other parameters specify the launch configuration, i.e., as grid dimension, block dimension, shared memory size, and the stream associated with the launch (please refer to Execution Configuration for the detailed description of launch configuration.
9.3.2.1.2. cudaGetParameterBuffer
cudaGetParameterBuffer() needs to be declared at the PTX level before it’s used. The PTX-level declaration must be in one of the two forms given below, depending on address size:
// PTX-level Declaration of cudaGetParameterBuffer() when .address_size is 64
.extern .func(.param .b64 func_retval0) cudaGetParameterBuffer
(
.param .b64 alignment,
.param .b64 size
)
;
The following CUDA-level declaration of cudaGetParameterBuffer() is mapped to the aforementioned PTX-level declaration:
// CUDA-level Declaration of cudaGetParameterBuffer()
extern "C" __device__
void *cudaGetParameterBuffer(size_t alignment, size_t size);
The first parameter specifies the alignment requirement of the parameter buffer and the second parameter the size requirement in bytes. In the current implementation, the parameter buffer returned by cudaGetParameterBuffer() is always guaranteed to be 64- byte aligned, and the alignment requirement parameter is ignored. However, it is recommended to pass the correct alignment requirement value - which is the largest alignment of any parameter to be placed in the parameter buffer - to cudaGetParameterBuffer() to ensure portability in the future.
9.3.2.2. Parameter Buffer Layout
Parameter reordering in the parameter buffer is prohibited, and each individual parameter placed in the parameter buffer is required to be aligned. That is, each parameter must be placed at the nth byte in the parameter buffer, where n is the smallest multiple of the parameter size that is greater than the offset of the last byte taken by the preceding parameter. The maximum size of the parameter buffer is 4KB.
For a more detailed description of PTX code generated by the CUDA compiler, please refer to the PTX-3.5 specification.
9.3.3. Toolkit Support for Dynamic Parallelism
9.3.3.1. Including Device Runtime API in CUDA Code
Similar to the host-side runtime API, prototypes for the CUDA device runtime API are included automatically during program compilation. There is no need to includecuda_device_runtime_api.h explicitly.
9.3.3.2. Compiling and Linking
When compiling and linking CUDA programs using dynamic parallelism with nvcc, the program will automatically link against the static device runtime library libcudadevrt.
The device runtime is offered as a static library (cudadevrt.lib on Windows, libcudadevrt.a under Linux), against which a GPU application that uses the device runtime must be linked. Linking of device libraries can be accomplished through nvcc and/or nvlink. Two simple examples are shown below.
A device runtime program may be compiled and linked in a single step, if all required source files can be specified from the command line:
$ nvcc -arch=sm_75 -rdc=true hello_world.cu -o hello -lcudadevrt
It is also possible to compile CUDA .cu source files first to object files, and then link these together in a two-stage process:
$ nvcc -arch=sm_75 -dc hello_world.cu -o hello_world.o
$ nvcc -arch=sm_75 -rdc=true hello_world.o -o hello -lcudadevrt
Please see the Using Separate Compilation section of The CUDA Driver Compiler NVCC guide for more details.
9.4. Programming Guidelines
9.4.1. Basics
The device runtime is a functional subset of the host runtime. API level device management, kernel launching, device memcpy, stream management, and event management are exposed from the device runtime.
Programming for the device runtime should be familiar to someone who already has experience with CUDA. Device runtime syntax and semantics are largely the same as that of the host API, with any exceptions detailed earlier in this document.
The following example shows a simple Hello World program incorporating dynamic parallelism:
#include <stdio.h>
__global__ void childKernel()
{
printf("Hello ");
}
__global__ void tailKernel()
{
printf("World!\n");
}
__global__ void parentKernel()
{
// launch child
childKernel<<<1,1>>>();
if (cudaSuccess != cudaGetLastError()) {
return;
}
// launch tail into cudaStreamTailLaunch stream
// implicitly synchronizes: waits for child to complete
tailKernel<<<1,1,0,cudaStreamTailLaunch>>>();
}
int main(int argc, char *argv[])
{
// launch parent
parentKernel<<<1,1>>>();
if (cudaSuccess != cudaGetLastError()) {
return 1;
}
// wait for parent to complete
if (cudaSuccess != cudaDeviceSynchronize()) {
return 2;
}
return 0;
}
This program may be built in a single step from the command line as follows:
$ nvcc -arch=sm_75 -rdc=true hello_world.cu -o hello -lcudadevrt
9.4.2. Performance
9.4.2.1. Dynamic-parallelism-enabled Kernel Overhead
System software which is active when controlling dynamic launches may impose an overhead on any kernel which is running at the time, whether or not it invokes kernel launches of its own. This overhead arises from the device runtime’s execution tracking and management software and may result in decreased performance. This overhead is, in general, incurred for applications that link against the device runtime library.
9.4.3. Implementation Restrictions and Limitations
Dynamic Parallelism guarantees all semantics described in this document, however, certain hardware and software resources are implementation-dependent and limit the scale, performance and other properties of a program which uses the device runtime.
9.4.3.1. Runtime
9.4.3.1.1. Memory Footprint
The device runtime system software reserves memory for various management purposes, in particular a reservation for tracking pending grid launches. Configuration controls are available to reduce the size of this reservation in exchange for certain launch limitations. See Configuration Options, below, for details.
9.4.3.1.2. Pending Kernel Launches
When a kernel is launched, all associated configuration and parameter data is tracked until the kernel completes. This data is stored within a system-managed launch pool.
The size of the fixed-size launch pool is configurable by calling cudaDeviceSetLimit() from the host and specifying cudaLimitDevRuntimePendingLaunchCount.
9.4.3.1.3. Configuration Options
Resource allocation for the device runtime system software is controlled via the cudaDeviceSetLimit() API from the host program. Limits must be set before any kernel is launched, and may not be changed while the GPU is actively running programs.
The following named limits may be set:
Limit |
Behavior |
|---|---|
|
Controls the amount of memory set aside for buffering kernel launches and events which have not yet begun to execute, due either to unresolved dependencies or lack of execution resources. When the buffer is full, an attempt to allocate a launch slot during a device side kernel launch will fail and return |
|
Controls the stack size in bytes of each GPU thread. The CUDA driver automatically increases the per-thread stack size for each kernel launch as needed. This size isn’t reset back to the original value after each launch. To set the per-thread stack size to a different value, |
9.4.3.1.4. Memory Allocation and Lifetime
cudaMalloc() and cudaFree() have distinct semantics between the host and device environments. When invoked from the host, cudaMalloc() allocates a new region from unused device memory. When invoked from the device runtime these functions map to device-side malloc() and free(). This implies that within the device environment the total allocatable memory is limited to the device malloc() heap size, which may be smaller than the available unused device memory. Also, it is an error to invoke cudaFree() from the host program on a pointer which was allocated by cudaMalloc() on the device or vice-versa.
|
|
|
|---|---|---|
|
Supported |
Not Supported |
|
Not Supported |
Supported |
Allocation limit |
Free device memory |
|
9.4.3.1.5. SM Id and Warp Id
Note that in PTX %smid and %warpid are defined as volatile values. The device runtime may reschedule thread blocks onto different SMs in order to more efficiently manage resources. As such, it is unsafe to rely upon %smid or %warpid remaining unchanged across the lifetime of a thread or thread block.
9.4.3.1.6. ECC Errors
No notification of ECC errors is available to code within a CUDA kernel. ECC errors are reported at the host side once the entire launch tree has completed. Any ECC errors which arise during execution of a nested program will either generate an exception or continue execution (depending upon error and configuration).
9.5. CDP2 vs CDP1
This section summarises the differences between, and the compatibility and interoperability of, the new (CDP2) and legacy (CDP1) CUDA Dynamic Parallelism interfaces. It also shows how to opt-out of the CDP2 interface on devices of compute capability less than 9.0.
9.5.1. Differences Between CDP1 and CDP2
Explicit device-side synchronization is no longer possible with CDP2 or on devices of compute capability 9.0 or higher. Implicit synchronization (such as tail launches) must be used instead.
Attempting to query or set cudaLimitDevRuntimeSyncDepth (or CU_LIMIT_DEV_RUNTIME_SYNC_DEPTH) with CDP2 or on devices of compute capability 9.0 or higher results in cudaErrorUnsupportedLimit.
CDP2 no longer has a virtualized pool for pending launches that don’t fit in the fixed-sized pool. cudaLimitDevRuntimePendingLaunchCount must be set to be large enough to avoid running out of launch slots.
For CDP2, there is a limit to the total number of events existing at once (note that events are destroyed only after a launch completes), equal to twice the pending launch count. cudaLimitDevRuntimePendingLaunchCount must be set to be large enough to avoid running out of event slots.
Streams are tracked per grid with CDP2 or on devices of compute capability 9.0 or higher, not per thread block. This allows work to be launched into a stream created by another thread block. Attempting to do so with the CDP1 results in cudaErrorInvalidValue.
CDP2 introduces the tail launch (cudaStreamTailLaunch) and fire-and-forget (cudaStreamFireAndForget) named streams.
CDP2 is supported only under 64-bit compilation mode.
9.5.2. Compatibility and Interoperability
CDP2 is the default. Functions can be compiled with -DCUDA_FORCE_CDP1_IF_SUPPORTED to opt-out of using CDP2 on devices of compute capability less than 9.0.
Function compiler with CUDA 12.0 and newer (default) |
Function compiled with pre-CUDA 12.0 or with CUDA 12.0 and newer with |
|
|---|---|---|
Compilation |
Compile error if device code references |
Compile error if code references |
Compute capability < 9.0 |
New interface is used. |
Legacy interface is used. |
Compute capability 9.0 and higher |
New interface is used. |
New interface is used. If function references |
Functions using CDP1 and CDP2 may be loaded and run simultaneously in the same context. The CDP1 functions are able to use CDP1-specific features (e.g. cudaDeviceSynchronize) and CDP2 functions are able to use CDP2-specific features (e.g. tail launch and fire-and-forget launch).
A function using CDP1 cannot launch a function using CDP2, and vice versa. If a function that would use CDP1 contains in its call graph a function that would use CDP2, or vice versa, cudaErrorCdpVersionMismatch would result during function load.
9.6. Legacy CUDA Dynamic Parallelism (CDP1)
See CUDA Dynamic Parallelism, above, for CDP2 version of document.
9.6.1. Execution Environment and Memory Model (CDP1)
See Execution Environment and Memory Model, above, for CDP2 version of document.
9.6.1.1. Execution Environment (CDP1)
See Execution Environment, above, for CDP2 version of document.
The CUDA execution model is based on primitives of threads, thread blocks, and grids, with kernel functions defining the program executed by individual threads within a thread block and grid. When a kernel function is invoked the grid’s properties are described by an execution configuration, which has a special syntax in CUDA. Support for dynamic parallelism in CUDA extends the ability to configure, launch, and synchronize upon new grids to threads that are running on the device.
Warning
Explicit synchronization with child kernels from a parent block (i.e. using cudaDeviceSynchronize() in device code) block is deprecated in CUDA 11.6, removed for compute_90+ compilation, and is slated for full removal in a future CUDA release.
9.6.1.1.1. Parent and Child Grids (CDP1)
See Parent and Child Grids, above, for CDP2 version of document.
A device thread that configures and launches a new grid belongs to the parent grid, and the grid created by the invocation is a child grid.
The invocation and completion of child grids is properly nested, meaning that the parent grid is not considered complete until all child grids created by its threads have completed. Even if the invoking threads do not explicitly synchronize on the child grids launched, the runtime guarantees an implicit synchronization between the parent and child.
Warning
Explicit synchronization with child kernels from a parent block (i.e. using cudaDeviceSynchronize() in device code) is deprecated in CUDA 11.6, removed for compute_90+ compilation, and is slated for full removal in a future CUDA release.
Figure 27 Parent-Child Launch Nesting
9.6.1.1.2. Scope of CUDA Primitives (CDP1)
See Scope of CUDA Primitives, above, for CDP2 version of document.
On both host and device, the CUDA runtime offers an API for launching kernels, for waiting for launched work to complete, and for tracking dependencies between launches via streams and events. On the host system, the state of launches and the CUDA primitives referencing streams and events are shared by all threads within a process; however processes execute independently and may not share CUDA objects.
A similar hierarchy exists on the device: launched kernels and CUDA objects are visible to all threads in a thread block, but are independent between thread blocks. This means for example that a stream may be created by one thread and used by any other thread in the same thread block, but may not be shared with threads in any other thread block.
9.6.1.1.3. Synchronization (CDP1)
See Synchronization, above, for CDP2 version of document.
Warning
Explicit synchronization with child kernels from a parent block (i.e. using cudaDeviceSynchronize() in device code) is deprecated in CUDA 11.6, removed for compute_90+ compilation, and is slated for full removal in a future CUDA release.
CUDA runtime operations from any thread, including kernel launches, are visible across a thread block. This means that an invoking thread in the parent grid may perform synchronization on the grids launched by that thread, by other threads in the thread block, or on streams created within the same thread block. Execution of a thread block is not considered complete until all launches by all threads in the block have completed. If all threads in a block exit before all child launches have completed, a synchronization operation will automatically be triggered.
9.6.1.1.4. Streams and Events (CDP1)
See Streams and Events, above, for CDP2 version of document.
CUDA Streams and Events allow control over dependencies between grid launches: grids launched into the same stream execute in-order, and events may be used to create dependencies between streams. Streams and events created on the device serve this exact same purpose.
Streams and events created within a grid exist within thread block scope but have undefined behavior when used outside of the thread block where they were created. As described above, all work launched by a thread block is implicitly synchronized when the block exits; work launched into streams is included in this, with all dependencies resolved appropriately. The behavior of operations on a stream that has been modified outside of thread block scope is undefined.
Streams and events created on the host have undefined behavior when used within any kernel, just as streams and events created by a parent grid have undefined behavior if used within a child grid.
9.6.1.1.5. Ordering and Concurrency (CDP1)
See Ordering and Concurrency, above, for CDP2 version of document.
The ordering of kernel launches from the device runtime follows CUDA Stream ordering semantics. Within a thread block, all kernel launches into the same stream are executed in-order. With multiple threads in the same thread block launching into the same stream, the ordering within the stream is dependent on the thread scheduling within the block, which may be controlled with synchronization primitives such as __syncthreads().
Note that because streams are shared by all threads within a thread block, the implicit NULL stream is also shared. If multiple threads in a thread block launch into the implicit stream, then these launches will be executed in-order. If concurrency is desired, explicit named streams should be used.
Dynamic Parallelism enables concurrency to be expressed more easily within a program; however, the device runtime introduces no new concurrency guarantees within the CUDA execution model. There is no guarantee of concurrent execution between any number of different thread blocks on a device.
The lack of concurrency guarantee extends to parent thread blocks and their child grids. When a parent thread block launches a child grid, the child is not guaranteed to begin execution until the parent thread block reaches an explicit synchronization point (such as cudaDeviceSynchronize()).
Warning
Explicit synchronization with child kernels from a parent block (i.e. using cudaDeviceSynchronize() in device code) is deprecated in CUDA 11.6, removed for compute_90+ compilation, and is slated for full removal in a future CUDA release.
While concurrency will often easily be achieved, it may vary as a function of deviceconfiguration, application workload, and runtime scheduling. It is therefore unsafe to depend upon any concurrency between different thread blocks.
9.6.1.1.6. Device Management (CDP1)
See Device Management, above, for CDP2 version of document.
There is no multi-GPU support from the device runtime; the device runtime is only capable of operating on the device upon which it is currently executing. It is permitted, however, to query properties for any CUDA capable device in the system.
9.6.1.2. Memory Model (CDP1)
See Memory Model, above, for CDP2 version of document.
Parent and child grids share the same global and constant memory storage, but have distinct local and shared memory.
9.6.1.2.1. Coherence and Consistency (CDP1)
See Coherence and Consistency, above, for CDP2 version of document.
9.6.1.2.1.1. Global Memory (CDP1)
See Global Memory, above, for CDP2 version of document.
Parent and child grids have coherent access to global memory, with weak consistency guarantees between child and parent. There are two points in the execution of a child grid when its view of memory is fully consistent with the parent thread: when the child grid is invoked by the parent, and when the child grid completes as signaled by a synchronization API invocation in the parent thread.
Warning
Explicit synchronization with child kernels from a parent block (i.e. using cudaDeviceSynchronize() in device code) is deprecated in CUDA 11.6, removed for compute_90+ compilation, and is slated for full removal in a future CUDA release.
All global memory operations in the parent thread prior to the child grid’s invocation are visible to the child grid. All memory operations of the child grid are visible to the parent after the parent has synchronized on the child grid’s completion.
In the following example, the child grid executing child_launch is only guaranteed to see the modifications to data made before the child grid was launched. Since thread 0 of the parent is performing the launch, the child will be consistent with the memory seen by thread 0 of the parent. Due to the first __syncthreads() call, the child will see data[0]=0, data[1]=1, …, data[255]=255 (without the __syncthreads() call, only data[0] would be guaranteed to be seen by the child). When the child grid returns, thread 0 is guaranteed to see modifications made by the threads in its child grid. Those modifications become available to the other threads of the parent grid only after the second __syncthreads() call:
__global__ void child_launch(int *data) {
data[threadIdx.x] = data[threadIdx.x]+1;
}
__global__ void parent_launch(int *data) {
data[threadIdx.x] = threadIdx.x;
__syncthreads();
if (threadIdx.x == 0) {
child_launch<<< 1, 256 >>>(data);
cudaDeviceSynchronize();
}
__syncthreads();
}
void host_launch(int *data) {
parent_launch<<< 1, 256 >>>(data);
}
9.6.1.2.1.2. Zero Copy Memory (CDP1)
See Zero Copy Memory, above, for CDP2 version of document.
Zero-copy system memory has identical coherence and consistency guarantees to global memory, and follows the semantics detailed above. A kernel may not allocate or free zero-copy memory, but may use pointers to zero-copy passed in from the host program.
9.6.1.2.1.3. Constant Memory (CDP1)
See Constant Memory, above, for CDP2 version of document.
Constants are immutable and may not be modified from the device, even between parent and child launches. That is to say, the value of all __constant__ variables must be set from the host prior to launch. Constant memory is inherited automatically by all child kernels from their respective parents.
Taking the address of a constant memory object from within a kernel thread has the same semantics as for all CUDA programs, and passing that pointer from parent to child or from a child to parent is naturally supported.
9.6.1.2.1.5. Local Memory (CDP1)
See Local Memory, above, for CDP2 version of document.
Local memory is private storage for an executing thread, and is not visible outside of that thread. It is illegal to pass a pointer to local memory as a launch argument when launching a child kernel. The result of dereferencing such a local memory pointer from a child will be undefined.
For example the following is illegal, with undefined behavior if x_array is accessed by child_launch:
int x_array[10]; // Creates x_array in parent's local memory
child_launch<<< 1, 1 >>>(x_array);
It is sometimes difficult for a programmer to be aware of when a variable is placed into local memory by the compiler. As a general rule, all storage passed to a child kernel should be allocated explicitly from the global-memory heap, either with cudaMalloc(), new() or by declaring __device__ storage at global scope. For example:
// Correct - "value" is global storage
__device__ int value;
__device__ void x() {
value = 5;
child<<< 1, 1 >>>(&value);
}
// Invalid - "value" is local storage
__device__ void y() {
int value = 5;
child<<< 1, 1 >>>(&value);
}
9.6.1.2.1.6. Texture Memory (CDP1)
See Texture Memory, above, for CDP2 version of document.
Writes to the global memory region over which a texture is mapped are incoherent with respect to texture accesses. Coherence for texture memory is enforced at the invocation of a child grid and when a child grid completes. This means that writes to memory prior to a child kernel launch are reflected in texture memory accesses of the child. Similarly, writes to memory by a child will be reflected in the texture memory accesses by a parent, but only after the parent synchronizes on the child’s completion. Concurrent accesses by parent and child may result in inconsistent data.
Warning
Explicit synchronization with child kernels from a parent block (i.e. using cudaDeviceSynchronize() in device code) is deprecated in CUDA 11.6, removed for compute_90+ compilation, and is slated for full removal in a future CUDA release.
9.6.2. Programming Interface (CDP1)
See Programming Interface, above, for CDP2 version of document.
9.6.2.1. CUDA C++ Reference (CDP1)
See CUDA C++ Reference, above, for CDP2 version of document.
This section describes changes and additions to the CUDA C++ language extensions for supporting Dynamic Parallelism.
The language interface and API available to CUDA kernels using CUDA C++ for Dynamic Parallelism, referred to as the Device Runtime, is substantially like that of the CUDA Runtime API available on the host. Where possible the syntax and semantics of the CUDA Runtime API have been retained in order to facilitate ease of code reuse for routines that may run in either the host or device environments.
As with all code in CUDA C++, the APIs and code outlined here is per-thread code. This enables each thread to make unique, dynamic decisions regarding what kernel or operation to execute next. There are no synchronization requirements between threads within a block to execute any of the provided device runtime APIs, which enables the device runtime API functions to be called in arbitrarily divergent kernel code without deadlock.
9.6.2.1.1. Device-Side Kernel Launch (CDP1)
See Kernel Launch APIs, above, for CDP2 version of document.
Kernels may be launched from the device using the standard CUDA <<< >>> syntax:
kernel_name<<< Dg, Db, Ns, S >>>([kernel arguments]);
Dgis of typedim3and specifies the dimensions and size of the gridDbis of typedim3and specifies the dimensions and size of each thread blockNsis of typesize_tand specifies the number of bytes of shared memory that is dynamically allocated per thread block for this call and addition to statically allocated memory.Nsis an optional argument that defaults to 0.Sis of typecudaStream_tand specifies the stream associated with this call. The stream must have been allocated in the same thread block where the call is being made.Sis an optional argument that defaults to 0.
9.6.2.1.1.1. Launches are Asynchronous (CDP1)
See Launches are Asynchronous, above, for CDP2 version of document.
Identical to host-side launches, all device-side kernel launches are asynchronous with respect to the launching thread. That is to say, the <<<>>> launch command will return immediately and the launching thread will continue to execute until it hits an explicit launch-synchronization point such as cudaDeviceSynchronize().
Warning
Explicit synchronization with child kernels from a parent block (i.e. using cudaDeviceSynchronize() in device code) is deprecated in CUDA 11.6, removed for compute_90+ compilation, and is slated for full removal in a future CUDA release.
The grid launch is posted to the device and will execute independently of the parent thread. The child grid may begin execution at any time after launch, but is not guaranteed to begin execution until the launching thread reaches an explicit launch-synchronization point.
9.6.2.1.1.2. Launch Environment Configuration (CDP1)
See Launch Environment Configuration, above, for CDP2 version of document.
All global device configuration settings (for example, shared memory and L1 cache size as returned from cudaDeviceGetCacheConfig(), and device limits returned from cudaDeviceGetLimit()) will be inherited from the parent. Likewise, device limits such as stack size will remain as-configured.
For host-launched kernels, per-kernel configurations set from the host will take precedence over the global setting. These configurations will be used when the kernel is launched from the device as well. It is not possible to reconfigure a kernel’s environment from the device.
9.6.2.1.2. Streams (CDP1)
See Streams, above, for CDP2 version of document.
Both named and unnamed (NULL) streams are available from the device runtime. Named streams may be used by any thread within a thread-block, but stream handles may not be passed to other blocks or child/parent kernels. In other words, a stream should be treated as private to the block in which it is created. Stream handles are not guaranteed to be unique between blocks, so using a stream handle within a block that did not allocate it will result in undefined behavior.
Similar to host-side launch, work launched into separate streams may run concurrently, but actual concurrency is not guaranteed. Programs that depend upon concurrency between child kernels are not supported by the CUDA programming model and will have undefined behavior.
The host-side NULL stream’s cross-stream barrier semantic is not supported on the device (see below for details). In order to retain semantic compatibility with the host runtime, all device streams must be created using the cudaStreamCreateWithFlags() API, passing the cudaStreamNonBlocking flag. The cudaStreamCreate() call is a host-runtime- only API and will fail to compile for the device.
As cudaStreamSynchronize() and cudaStreamQuery() are unsupported by the device runtime, cudaDeviceSynchronize() should be used instead when the application needs to know that stream-launched child kernels have completed.
Warning
Explicit synchronization with child kernels from a parent block (i.e. using cudaDeviceSynchronize() in device code) is deprecated in CUDA 11.6, removed for compute_90+ compilation, and is slated for full removal in a future CUDA release.
9.6.2.1.2.1. The Implicit (NULL) Stream (CDP1)
See The Implicit (NULL) Stream, above, for CDP2 version of document.
Within a host program, the unnamed (NULL) stream has additional barrier synchronization semantics with other streams (see Default Stream for details). The device runtime offers a single implicit, unnamed stream shared between all threads in a block, but as all named streams must be created with the cudaStreamNonBlocking flag, work launched into the NULL stream will not insert an implicit dependency on pending work in any other streams (including NULL streams of other thread blocks).
9.6.2.1.3. Events (CDP1)
See Events, above, for CDP2 version of document.
Only the inter-stream synchronization capabilities of CUDA events are supported. This means that cudaStreamWaitEvent() is supported, but cudaEventSynchronize(), cudaEventElapsedTime(), and cudaEventQuery() are not. As cudaEventElapsedTime() is not supported, cudaEvents must be created via cudaEventCreateWithFlags(), passing the cudaEventDisableTiming flag.
As for all device runtime objects, event objects may be shared between all threads within the thread-block which created them but are local to that block and may not be passed to other kernels, or between blocks within the same kernel. Event handles are not guaranteed to be unique between blocks, so using an event handle within a block that did not create it will result in undefined behavior.
9.6.2.1.4. Synchronization (CDP1)
See Synchronization, above, for CDP2 version of document.
Warning
Explicit synchronization with child kernels from a parent block (i.e. using cudaDeviceSynchronize() in device code) is deprecated in CUDA 11.6, removed for compute_90+ compilation, and is slated for full removal in a future CUDA release.
The cudaDeviceSynchronize() function will synchronize on all work launched by any thread in the thread-block up to the point where cudaDeviceSynchronize() was called. Note that cudaDeviceSynchronize() may be called from within divergent code (see Block Wide Synchronization (CDP1)).
It is up to the program to perform sufficient additional inter-thread synchronization, for example via a call to __syncthreads(), if the calling thread is intended to synchronize with child grids invoked from other threads.
9.6.2.1.4.1. Block Wide Synchronization (CDP1)
See CUDA Dynamic Parallelism, above, for CDP2 version of document.
The cudaDeviceSynchronize() function does not imply intra-block synchronization. In particular, without explicit synchronization via a __syncthreads() directive the calling thread can make no assumptions about what work has been launched by any thread other than itself. For example if multiple threads within a block are each launching work and synchronization is desired for all this work at once (perhaps because of event-based dependencies), it is up to the program to guarantee that this work is submitted by all threads before calling cudaDeviceSynchronize().
Because the implementation is permitted to synchronize on launches from any thread in the block, it is quite possible that simultaneous calls to cudaDeviceSynchronize() by multiple threads will drain all work in the first call and then have no effect for the later calls.
9.6.2.1.5. Device Management (CDP1)
See Device Management, above, for CDP2 version of document.
Only the device on which a kernel is running will be controllable from that kernel. This means that device APIs such as cudaSetDevice() are not supported by the device runtime. The active device as seen from the GPU (returned from cudaGetDevice()) will have the same device number as seen from the host system. The cudaDeviceGetAttribute() call may request information about another device as this API allows specification of a device ID as a parameter of the call. Note that the catch-all cudaGetDeviceProperties() API is not offered by the device runtime - properties must be queried individually.
9.6.2.1.6. Memory Declarations (CDP1)
See Memory Declarations, above, for CDP2 version of document.
9.6.2.1.6.1. Device and Constant Memory (CDP1)
See Device and Constant Memory, above, for CDP2 version of document.
Memory declared at file scope with __device__ or __constant__ memory space specifiers behaves identically when using the device runtime. All kernels may read or write device variables, whether the kernel was initially launched by the host or device runtime. Equivalently, all kernels will have the same view of __constant__s as declared at the module scope.
9.6.2.1.6.2. Textures and Surfaces (CDP1)
See Textures and Surfaces, above, for CDP2 version of document.
CUDA supports dynamically created texture and surface objects14, where a texture object may be created on the host, passed to a kernel, used by that kernel, and then destroyed from the host. The device runtime does not allow creation or destruction of texture or surface objects from within device code, but texture and surface objects created from the host may be used and passed around freely on the device. Regardless of where they are created, dynamically created texture objects are always valid and may be passed to child kernels from a parent.
Note
The device runtime does not support legacy module-scope (i.e., Fermi-style) textures and surfaces within a kernel launched from the device. Module-scope (legacy) textures may be created from the host and used in device code as for any kernel, but may only be used by a top-level kernel (i.e., the one which is launched from the host).
9.6.2.1.6.4. Symbol Addresses (CDP1)
See Symbol Addresses, above, for CDP2 version of document.
Device-side symbols (i.e., those marked __device__) may be referenced from within a kernel simply via the & operator, as all global-scope device variables are in the kernel’s visible address space. This also applies to __constant__ symbols, although in this case the pointer will reference read-only data.
Given that device-side symbols can be referenced directly, those CUDA runtime APIs which reference symbols (for example, cudaMemcpyToSymbol() or cudaGetSymbolAddress()) are redundant and hence not supported by the device runtime. Note this implies that constant data cannot be altered from within a running kernel, even ahead of a child kernel launch, as references to __constant__ space are read-only.
9.6.2.1.7. API Errors and Launch Failures (CDP1)
See API Errors and Launch Failures, above, for CDP2 version of document.
As usual for the CUDA runtime, any function may return an error code. The last error code returned is recorded and may be retrieved via the cudaGetLastError() call. Errors are recorded per-thread, so that each thread can identify the most recent error that it has generated. The error code is of type cudaError_t.
Similar to a host-side launch, device-side launches may fail for many reasons (invalid arguments, and so on). The user must call cudaGetLastError() to determine if a launch generated an error, however lack of an error after launch does not imply the child kernel completed successfully.
For device-side exceptions, for example, access to an invalid address, an error in a child grid will be returned to the host instead of being returned by the parent’s call to cudaDeviceSynchronize().
9.6.2.1.7.1. Launch Setup APIs (CDP1)
See Launch Setup APIs, above, for CDP2 version of document.
Kernel launch is a system-level mechanism exposed through the device runtime library, and as such is available directly from PTX via the underlying cudaGetParameterBuffer() and cudaLaunchDevice() APIs. It is permitted for a CUDA application to call these APIs itself, with the same requirements as for PTX. In both cases, the user is then responsible for correctly populating all necessary data structures in the correct format according to specification. Backwards compatibility is guaranteed in these data structures.
As with host-side launch, the device-side operator <<<>>> maps to underlying kernel launch APIs. This is so that users targeting PTX will be able to enact a launch, and so that the compiler front-end can translate <<<>>> into these calls.
Runtime API Launch Functions |
Description of Difference From Host Runtime Behaviour (behavior is identical if no description) |
|---|---|
|
Generated automatically from |
|
Generated automatically from |
The APIs for these launch functions are different to those of the CUDA Runtime API, and are defined as follows:
extern device cudaError_t cudaGetParameterBuffer(void **params);
extern __device__ cudaError_t cudaLaunchDevice(void *kernel,
void *params, dim3 gridDim,
dim3 blockDim,
unsigned int sharedMemSize = 0,
cudaStream_t stream = 0);
9.6.2.1.8. API Reference (CDP1)
See API Reference, above, for CDP2 version of document.
The portions of the CUDA Runtime API supported in the device runtime are detailed here. Host and device runtime APIs have identical syntax; semantics are the same except where indicated. The table below provides an overview of the API relative to the version available from the host.
Runtime API Functions |
Details |
|---|---|
|
Synchronizes on work launched from thread’s own block only. Warning: Note that calling this API from device code is deprecated in CUDA 11.6, removed for compute_90+ compilation, and is slated for full removal in a future CUDA release. |
|
|
|
|
|
Last error is per-thread state, not per-block state |
|
|
|
|
|
|
|
Will return attributes for any device |
|
Always returns current device ID as would be seen from host |
|
Must pass |
|
|
|
|
|
Must pass |
|
|
|
|
|
|
|
Notes about all
|
|
|
|
|
|
|
|
|
|
|
|
|
|
May not call |
|
|
|
|
|
|
|
9.6.2.2. Device-side Launch from PTX (CDP1)
See Device-side Launch from PTX, above, for CDP2 version of document.
This section is for the programming language and compiler implementers who target Parallel Thread Execution (PTX) and plan to support Dynamic Parallelism in their language. It provides the low-level details related to supporting kernel launches at the PTX level.
9.6.2.2.1. Kernel Launch APIs (CDP1)
See Kernel Launch APIs, above, for CDP2 version of document.
Device-side kernel launches can be implemented using the following two APIs accessible from PTX: cudaLaunchDevice() and cudaGetParameterBuffer(). cudaLaunchDevice() launches the specified kernel with the parameter buffer that is obtained by calling cudaGetParameterBuffer() and filled with the parameters to the launched kernel. The parameter buffer can be NULL, i.e., no need to invoke cudaGetParameterBuffer(), if the launched kernel does not take any parameters.
9.6.2.2.1.1. cudaLaunchDevice (CDP1)
See cudaLaunchDevice, above, for CDP2 version of document.
At the PTX level, cudaLaunchDevice()needs to be declared in one of the two forms shown below before it is used.
// PTX-level Declaration of cudaLaunchDevice() when .address_size is 64
.extern .func(.param .b32 func_retval0) cudaLaunchDevice
(
.param .b64 func,
.param .b64 parameterBuffer,
.param .align 4 .b8 gridDimension[12],
.param .align 4 .b8 blockDimension[12],
.param .b32 sharedMemSize,
.param .b64 stream
)
;
// PTX-level Declaration of cudaLaunchDevice() when .address_size is 32
.extern .func(.param .b32 func_retval0) cudaLaunchDevice
(
.param .b32 func,
.param .b32 parameterBuffer,
.param .align 4 .b8 gridDimension[12],
.param .align 4 .b8 blockDimension[12],
.param .b32 sharedMemSize,
.param .b32 stream
)
;
The CUDA-level declaration below is mapped to one of the aforementioned PTX-level declarations and is found in the system header file cuda_device_runtime_api.h. The function is defined in the cudadevrt system library, which must be linked with a program in order to use device-side kernel launch functionality.
// CUDA-level declaration of cudaLaunchDevice()
extern "C" __device__
cudaError_t cudaLaunchDevice(void *func, void *parameterBuffer,
dim3 gridDimension, dim3 blockDimension,
unsigned int sharedMemSize,
cudaStream_t stream);
The first parameter is a pointer to the kernel to be is launched, and the second parameter is the parameter buffer that holds the actual parameters to the launched kernel. The layout of the parameter buffer is explained in Parameter Buffer Layout (CDP1), below. Other parameters specify the launch configuration, i.e., as grid dimension, block dimension, shared memory size, and the stream associated with the launch (please refer to Execution Configuration for the detailed description of launch configuration.
9.6.2.2.1.2. cudaGetParameterBuffer (CDP1)
See cudaGetParameterBuffer, above, for CDP2 version of document.
cudaGetParameterBuffer() needs to be declared at the PTX level before it’s used. The PTX-level declaration must be in one of the two forms given below, depending on address size:
// PTX-level Declaration of cudaGetParameterBuffer() when .address_size is 64
// When .address_size is 64
.extern .func(.param .b64 func_retval0) cudaGetParameterBuffer
(
.param .b64 alignment,
.param .b64 size
)
;
// PTX-level Declaration of cudaGetParameterBuffer() when .address_size is 32
.extern .func(.param .b32 func_retval0) cudaGetParameterBuffer
(
.param .b32 alignment,
.param .b32 size
)
;
The following CUDA-level declaration of cudaGetParameterBuffer() is mapped to the aforementioned PTX-level declaration:
// CUDA-level Declaration of cudaGetParameterBuffer()
extern "C" __device__
void *cudaGetParameterBuffer(size_t alignment, size_t size);
The first parameter specifies the alignment requirement of the parameter buffer and the second parameter the size requirement in bytes. In the current implementation, the parameter buffer returned by cudaGetParameterBuffer() is always guaranteed to be 64- byte aligned, and the alignment requirement parameter is ignored. However, it is recommended to pass the correct alignment requirement value - which is the largest alignment of any parameter to be placed in the parameter buffer - to cudaGetParameterBuffer() to ensure portability in the future.
9.6.2.2.2. Parameter Buffer Layout (CDP1)
See Parameter Buffer Layout, above, for CDP2 version of document.
Parameter reordering in the parameter buffer is prohibited, and each individual parameter placed in the parameter buffer is required to be aligned. That is, each parameter must be placed at the nth byte in the parameter buffer, where n is the smallest multiple of the parameter size that is greater than the offset of the last byte taken by the preceding parameter. The maximum size of the parameter buffer is 4KB.
For a more detailed description of PTX code generated by the CUDA compiler, please refer to the PTX-3.5 specification.
9.6.2.3. Toolkit Support for Dynamic Parallelism (CDP1)
See Toolkit Support for Dynamic Parallelism, above, for CDP2 version of document.
9.6.2.3.1. Including Device Runtime API in CUDA Code (CDP1)
See Including Device Runtime API in CUDA Code, above, for CDP2 version of document.
Similar to the host-side runtime API, prototypes for the CUDA device runtime API are included automatically during program compilation. There is no need to include cuda_device_runtime_api.h explicitly.
9.6.2.3.2. Compiling and Linking (CDP1)
See Compiling and Linking, above, for CDP2 version of document.
When compiling and linking CUDA programs using dynamic parallelism with nvcc, the program will automatically link against the static device runtime library libcudadevrt.
The device runtime is offered as a static library (cudadevrt.lib on Windows, libcudadevrt.a under Linux), against which a GPU application that uses the device runtime must be linked. Linking of device libraries can be accomplished through nvcc and/or nvlink. Two simple examples are shown below.
A device runtime program may be compiled and linked in a single step, if all required source files can be specified from the command line:
$ nvcc -arch=sm_75 -rdc=true hello_world.cu -o hello -lcudadevrt
It is also possible to compile CUDA .cu source files first to object files, and then link these together in a two-stage process:
$ nvcc -arch=sm_75 -dc hello_world.cu -o hello_world.o
$ nvcc -arch=sm_75 -rdc=true hello_world.o -o hello -lcudadevrt
Please see the Using Separate Compilation section of The CUDA Driver Compiler NVCC guide for more details.
9.6.3. Programming Guidelines (CDP1)
See Programming Guidelines, above, for CDP2 version of document.
9.6.3.1. Basics (CDP1)
See Basics, above, for CDP2 version of document.
The device runtime is a functional subset of the host runtime. API level device management, kernel launching, device memcpy, stream management, and event management are exposed from the device runtime.
Programming for the device runtime should be familiar to someone who already has experience with CUDA. Device runtime syntax and semantics are largely the same as that of the host API, with any exceptions detailed earlier in this document.
Warning
Explicit synchronization with child kernels from a parent block (i.e. using cudaDeviceSynchronize() in device code) is deprecated in CUDA 11.6, removed for compute_90+ compilation, and is slated for full removal in a future CUDA release.
The following example shows a simple Hello World program incorporating dynamic parallelism:
#include <stdio.h>
__global__ void childKernel()
{
printf("Hello ");
}
__global__ void parentKernel()
{
// launch child
childKernel<<<1,1>>>();
if (cudaSuccess != cudaGetLastError()) {
return;
}
// wait for child to complete
if (cudaSuccess != cudaDeviceSynchronize()) {
return;
}
printf("World!\n");
}
int main(int argc, char *argv[])
{
// launch parent
parentKernel<<<1,1>>>();
if (cudaSuccess != cudaGetLastError()) {
return 1;
}
// wait for parent to complete
if (cudaSuccess != cudaDeviceSynchronize()) {
return 2;
}
return 0;
}
This program may be built in a single step from the command line as follows:
$ nvcc -arch=sm_75 -rdc=true hello_world.cu -o hello -lcudadevrt
9.6.3.2. Performance (CDP1)
See Performance, above, for CDP2 version of document.
9.6.3.2.1. Synchronization (CDP1)
See CUDA Dynamic Parallelism, above, for CDP2 version of document.
Warning
Explicit synchronization with child kernels from a parent block (such as using cudaDeviceSynchronize() in device code) is deprecated in CUDA 11.6, removed for compute_90+ compilation, and is slated for full removal in a future CUDA release.
Synchronization by one thread may impact the performance of other threads in the same Thread Block, even when those other threads do not call cudaDeviceSynchronize() themselves. This impact will depend upon the underlying implementation. In general the implicit synchronization of child kernels done when a thread block ends is more efficient compared to calling cudaDeviceSynchronize() explicitly. It is therefore recommended to only call cudaDeviceSynchronize() if it is needed to synchronize with a child kernel before a thread block ends.
9.6.3.2.2. Dynamic-parallelism-enabled Kernel Overhead (CDP1)
See Dynamic-parallelism-enabled Kernel Overhead, above, for CDP2 version of document.
System software which is active when controlling dynamic launches may impose an overhead on any kernel which is running at the time, whether or not it invokes kernel launches of its own. This overhead arises from the device runtime’s execution tracking and management software and may result in decreased performance for example, library calls when made from the device compared to from the host side. This overhead is, in general, incurred for applications that link against the device runtime library.
9.6.3.3. Implementation Restrictions and Limitations (CDP1)
See Implementation Restrictions and Limitations, above, for CDP2 version of document.
Dynamic Parallelism guarantees all semantics described in this document, however, certain hardware and software resources are implementation-dependent and limit the scale, performance and other properties of a program which uses the device runtime.
9.6.3.3.1. Runtime (CDP1)
See Runtime, above, for CDP2 version of document.
9.6.3.3.1.1. Memory Footprint (CDP1)
See Memory Footprint, above, for CDP2 version of document.
The device runtime system software reserves memory for various management purposes, in particular one reservation which is used for saving parent-grid state during synchronization, and a second reservation for tracking pending grid launches. Configuration controls are available to reduce the size of these reservations in exchange for certain launch limitations. See Configuration Options (CDP1), below, for details.
The majority of reserved memory is allocated as backing-store for parent kernel state, for use when synchronizing on a child launch. Conservatively, this memory must support storing of state for the maximum number of live threads possible on the device. This means that each parent generation at which cudaDeviceSynchronize() is callable may require up to 860MB of device memory, depending on the device configuration, which will be unavailable for program use even if it is not all consumed.
9.6.3.3.1.2. Nesting and Synchronization Depth (CDP1)
See CUDA Dynamic Parallelism, above, for CDP2 version of document.
Using the device runtime, one kernel may launch another kernel, and that kernel may launch another, and so on. Each subordinate launch is considered a new nesting level, and the total number of levels is the nesting depth of the program. The synchronization depth is defined as the deepest level at which the program will explicitly synchronize on a child launch. Typically this is one less than the nesting depth of the program, but if the program does not need to call cudaDeviceSynchronize() at all levels then the synchronization depth might be substantially different to the nesting depth.
Warning
Explicit synchronization with child kernels from a parent block (i.e. using cudaDeviceSynchronize() in device code) is deprecated in CUDA 11.6, removed for compute_90+ compilation, and is slated for full removal in a future CUDA release.
The overall maximum nesting depth is limited to 24, but practically speaking the real limit will be the amount of memory required by the system for each new level (see Memory Footprint (CDP1) above). Any launch which would result in a kernel at a deeper level than the maximum will fail. Note that this may also apply to cudaMemcpyAsync(), which might itself generate a kernel launch. See Configuration Options (CDP1) for details.
By default, sufficient storage is reserved for two levels of synchronization. This maximum synchronization depth (and hence reserved storage) may be controlled by calling cudaDeviceSetLimit() and specifying cudaLimitDevRuntimeSyncDepth. The number of levels to be supported must be configured before the top-level kernel is launched from the host, in order to guarantee successful execution of a nested program. Calling cudaDeviceSynchronize() at a depth greater than the specified maximum synchronization depth will return an error.
An optimization is permitted where the system detects that it need not reserve space for the parent’s state in cases where the parent kernel never calls cudaDeviceSynchronize(). In this case, because explicit parent/child synchronization never occurs, the memory footprint required for a program will be much less than the conservative maximum. Such a program could specify a shallower maximum synchronization depth to avoid over-allocation of backing store.
9.6.3.3.1.3. Pending Kernel Launches (CDP1)
See Pending Kernel Launches, above, for CDP2 version of document.
When a kernel is launched, all associated configuration and parameter data is tracked until the kernel completes. This data is stored within a system-managed launch pool.
The launch pool is divided into a fixed-size pool and a virtualized pool with lower performance. The device runtime system software will try to track launch data in the fixed-size pool first. The virtualized pool will be used to track new launches when the fixed-size pool is full.
The size of the fixed-size launch pool is configurable by calling cudaDeviceSetLimit() from the host and specifying cudaLimitDevRuntimePendingLaunchCount.
9.6.3.3.1.4. Configuration Options (CDP1)
See Configuration Options, above, for CDP2 version of document.
Resource allocation for the device runtime system software is controlled via the cudaDeviceSetLimit() API from the host program. Limits must be set before any kernel is launched, and may not be changed while the GPU is actively running programs.
Warning
Explicit synchronization with child kernels from a parent block (i.e. using cudaDeviceSynchronize() in device code) is deprecated in CUDA 11.6, removed for compute_90+ compilation, and is slated for full removal in a future CUDA release.
The following named limits may be set:
Limit |
Behavior |
|---|---|
|
Sets the maximum depth at which |
|
Controls the amount of memory set aside for buffering kernel launches which have not yet begun to execute, due either to unresolved dependencies or lack of execution resources. When the buffer is full, the device runtime system software will attempt to track new pending launches in a lower performance virtualized buffer. If the virtualized buffer is also full, i.e. when all available heap space is consumed, launches will not occur, and the thread’s last error will be set to |
|
Controls the stack size in bytes of each GPU thread. The CUDA driver automatically increases the per-thread stack size for each kernel launch as needed. This size isn’t reset back to the original value after each launch. To set the per-thread stack size to a different value, |
9.6.3.3.1.5. Memory Allocation and Lifetime (CDP1)
See Memory Allocation and Lifetime, above, for CDP2 version of document.
cudaMalloc() and cudaFree() have distinct semantics between the host and device environments. When invoked from the host, cudaMalloc() allocates a new region from unused device memory. When invoked from the device runtime these functions map to device-side malloc() and free(). This implies that within the device environment the total allocatable memory is limited to the device malloc() heap size, which may be smaller than the available unused device memory. Also, it is an error to invoke cudaFree() from the host program on a pointer which was allocated by cudaMalloc() on the device or vice-versa.
|
|
|
|---|---|---|
|
Supported |
Not Supported |
|
Not Supported |
Supported |
Allocation limit |
Free device memory |
|
9.6.3.3.1.6. SM Id and Warp Id (CDP1)
See SM Id and Warp Id, above, for CDP2 version of document.
Note that in PTX %smid and %warpid are defined as volatile values. The device runtime may reschedule thread blocks onto different SMs in order to more efficiently manage resources. As such, it is unsafe to rely upon %smid or %warpid remaining unchanged across the lifetime of a thread or thread block.
9.6.3.3.1.7. ECC Errors (CDP1)
See ECC Errors, above, for CDP2 version of document.
No notification of ECC errors is available to code within a CUDA kernel. ECC errors are reported at the host side once the entire launch tree has completed. Any ECC errors which arise during execution of a nested program will either generate an exception or continue execution (depending upon error and configuration).
10. Virtual Memory Management
10.1. Introduction
The Virtual Memory Management APIs provide a way for the application to directly manage the unified virtual address space that CUDA provides to map physical memory to virtual addresses accessible by the GPU. Introduced in CUDA 10.2, these APIs additionally provide a new way to interop with other processes and graphics APIs like OpenGL and Vulkan, as well as provide newer memory attributes that a user can tune to fit their applications.
Historically, memory allocation calls (such as cudaMalloc()) in the CUDA programming model have returned a memory address that points to the GPU memory. The address thus obtained could be used with any CUDA API or inside a device kernel. However, the memory allocated could not be resized depending on the user’s memory needs. In order to increase an allocation’s size, the user had to explicitly allocate a larger buffer, copy data from the initial allocation, free it and then continue to keep track of the newer allocation’s address. This often leads to lower performance and higher peak memory utilization for applications. Essentially, users had a malloc-like interface for allocating GPU memory, but did not have a corresponding realloc to complement it. The Virtual Memory Management APIs decouple the idea of an address and memory and allow the application to handle them separately. The APIs allow applications to map and unmap memory from a virtual address range as they see fit.
In the case of enabling peer device access to memory allocations by using cudaEnablePeerAccess, all past and future user allocations are mapped to the target peer device. This lead to users unwittingly paying runtime cost of mapping all cudaMalloc allocations to peer devices. However, in most situations applications communicate by sharing only a few allocations with another device and not all allocations are required to be mapped to all the devices. With Virtual Memory Management, applications can specifically choose certain allocations to be accessible from target devices.
The CUDA Virtual Memory Management APIs expose fine grained control to the user for managing the GPU memory in applications. It provides APIs that let users:
Place memory allocated on different devices into a contiguous VA range.
Perform interprocess communication for memory sharing using platform-specific mechanisms.
Opt into newer memory types on the devices that support them.
In order to allocate memory, the Virtual Memory Management programming model exposes the following functionality:
Allocating physical memory.
Reserving a VA range.
Mapping allocated memory to the VA range.
Controlling access rights on the mapped range.
Note that the suite of APIs described in this section require a system that supports UVA.
10.2. Query for Support
Before attempting to use Virtual Memory Management APIs, applications must ensure that the devices they want to use support CUDA Virtual Memory Management. The following code sample shows querying for Virtual Memory Management support:
int deviceSupportsVmm;
CUresult result = cuDeviceGetAttribute(&deviceSupportsVmm, CU_DEVICE_ATTRIBUTE_VIRTUAL_MEMORY_MANAGEMENT_SUPPORTED, device);
if (deviceSupportsVmm != 0) {
// `device` supports Virtual Memory Management
}
10.3. Allocating Physical Memory
The first step in memory allocation using Virtual Memory Management APIs is to create a physical memory chunk that will provide a backing for the allocation. In order to allocate physical memory, applications must use the cuMemCreate API. The allocation created by this function does not have any device or host mappings. The function argument CUmemGenericAllocationHandle describes the properties of the memory to allocate such as the location of the allocation, if the allocation is going to be shared to another process (or other Graphics APIs), or the physical attributes of the memory to be allocated. Users must ensure the requested allocation’s size must be aligned to appropriate granularity. Information regarding an allocation’s granularity requirements can be queried using cuMemGetAllocationGranularity. The following code snippet shows allocating physical memory with cuMemCreate:
CUmemGenericAllocationHandle allocatePhysicalMemory(int device, size_t size) {
CUmemAllocationProp prop = {};
prop.type = CU_MEM_ALLOCATION_TYPE_PINNED;
prop.location.type = CU_MEM_LOCATION_TYPE_DEVICE;
prop.location.id = device;
size_t granularity = 0;
cuMemGetAllocationGranularity(&granularity, &prop, CU_MEM_ALLOC_GRANULARITY_MINIMUM);
// Ensure size matches granularity requirements for the allocation
size_t padded_size = ROUND_UP(size, granularity);
// Allocate physical memory
CUmemGenericAllocationHandle allocHandle;
cuMemCreate(&allocHandle, padded_size, &prop, 0);
return allocHandle;
}
The memory allocated by cuMemCreate is referenced by the CUmemGenericAllocationHandle it returns. This is a departure from the cudaMalloc-style of allocation, which returns a pointer to the GPU memory, which was directly accessible by CUDA kernel executing on the device. The memory allocated cannot be used for any operations other than querying properties using cuMemGetAllocationPropertiesFromHandle. In order to make this memory accessible, applications must map this memory into a VA range reserved by cuMemAddressReserve and provide suitable access rights to it. Applications must free the allocated memory using the cuMemRelease API.
10.3.2. Memory Type
Before CUDA 10.2, applications had no user-controlled way of allocating any special type of memory that certain devices may support. With cuMemCreate, applications can additionally specify memory type requirements using the CUmemAllocationProp::allocFlags to opt into any specific memory features. Applications must also ensure that the requested memory type is supported on the device of allocation.
10.3.2.1. Compressible Memory
Compressible memory can be used to accelerate accesses to data with unstructured sparsity and other compressible data patterns. Compression can save DRAM bandwidth, L2 read bandwidth and L2 capacity depending on the data being operated on. Applications that want to allocate compressible memory on devices that support Compute Data Compression can do so by setting CUmemAllocationProp::allocFlags::compressionType to CU_MEM_ALLOCATION_COMP_GENERIC. Users must query if device supports Compute Data Compression by using CU_DEVICE_ATTRIBUTE_GENERIC_COMPRESSION_SUPPORTED. The following code snippet illustrates querying compressible memory support cuDeviceGetAttribute.
int compressionSupported = 0;
cuDeviceGetAttribute(&compressionSupported, CU_DEVICE_ATTRIBUTE_GENERIC_COMPRESSION_SUPPORTED, device);
On devices that support Compute Data Compression, users must opt in at allocation time as shown below:
prop.allocFlags.compressionType = CU_MEM_ALLOCATION_COMP_GENERIC;
Due to various reasons such as limited HW resources, the allocation may not have compression attributes, the user is expected to query back the properties of the allocated memory using cuMemGetAllocationPropertiesFromHandle and check for compression attribute.
CUmemAllocationPropPrivate allocationProp = {};
cuMemGetAllocationPropertiesFromHandle(&allocationProp, allocationHandle);
if (allocationProp.allocFlags.compressionType == CU_MEM_ALLOCATION_COMP_GENERIC)
{
// Obtained compressible memory allocation
}
10.4. Reserving a Virtual Address Range
Since with Virtual Memory Management the notions of address and memory are distinct, applications must carve out an address range that can hold the memory allocations made by cuMemCreate. The address range reserved must be at least as large as the sum of the sizes of all the physical memory allocations the user plans to place in them.
Applications can reserve a virtual address range by passing appropriate parameters to cuMemAddressReserve. The address range obtained will not have any device or host physical memory associated with it. The reserved virtual address range can be mapped to memory chunks belonging to any device in the system, thus providing the application a continuous VA range backed and mapped by memory belonging to different devices. Applications are expected to return the virtual address range back to CUDA using cuMemAddressFree. Users must ensure that the entire VA range is unmapped before calling cuMemAddressFree. These functions are conceptually similar to mmap/munmap (on Linux) or VirtualAlloc/VirtualFree (on Windows) functions. The following code snippet illustrates the usage for the function:
CUdeviceptr ptr;
// `ptr` holds the returned start of virtual address range reserved.
CUresult result = cuMemAddressReserve(&ptr, size, 0, 0, 0); // alignment = 0 for default alignment
10.5. Virtual Aliasing Support
The Virtual Memory Management APIs provide a way to create multiple virtual memory mappings or “proxies” to the same allocation using multiple calls to cuMemMap with different virtual addresses, so-called virtual aliasing. Unless otherwise noted in the PTX ISA, writes to one proxy of the allocation are considered inconsistent and incoherent with any other proxy of the same memory until the writing device operation (grid launch, memcpy, memset, and so on) completes. Grids present on the GPU prior to a writing device operation but reading after the writing device operation completes are also considered to have inconsistent and incoherent proxies.
For example, the following snippet is considered undefined, assuming device pointers A and B are virtual aliases of the same memory allocation:
__global__ void foo(char *A, char *B) {
*A = 0x1;
printf("%d\n", *B); // Undefined behavior! *B can take on either
// the previous value or some value in-between.
}
The following is defined behavior, assuming these two kernels are ordered monotonically (by streams or events).
__global__ void foo1(char *A) {
*A = 0x1;
}
__global__ void foo2(char *B) {
printf("%d\n", *B); // *B == *A == 0x1 assuming foo2 waits for foo1
// to complete before launching
}
cudaMemcpyAsync(B, input, size, stream1); // Aliases are allowed at
// operation boundaries
foo1<<<1,1,0,stream1>>>(A); // allowing foo1 to access A.
cudaEventRecord(event, stream1);
cudaStreamWaitEvent(stream2, event);
foo2<<<1,1,0,stream2>>>(B);
cudaStreamWaitEvent(stream3, event);
cudaMemcpyAsync(output, B, size, stream3); // Both launches of foo2 and
// cudaMemcpy (which both
// read) wait for foo1 (which writes)
// to complete before proceeding
If accessing same allocation through different “proxies” is required in the same kernel a fence.proxy.alias can be used between the two accesses. The above example can thus be made legal with inline PTX assembly:
__global__ void foo(char *A, char *B) {
*A = 0x1;
asm volatile ("fence.proxy.alias;" ::: "memory");
printf("%d\n", *B); // *B == *A == 0x1
}
10.6. Mapping Memory
The allocated physical memory and the carved out virtual address space from the previous two sections represent the memory and address distinction introduced by the Virtual Memory Management APIs. For the allocated memory to be useable, the user must first place the memory in the address space. The address range obtained from cuMemAddressReserve and the physical allocation obtained from cuMemCreate or cuMemImportFromShareableHandle must be associated with each other by using cuMemMap.
Users can associate allocations from multiple devices to reside in contiguous virtual address ranges as long as they have carved out enough address space. In order to decouple the physical allocation and the address range, users must unmap the address of the mapping by using cuMemUnmap. Users can map and unmap memory to the same address range as many times as they want, as long as they ensure that they don’t attempt to create mappings on VA range reservations that are already mapped. The following code snippet illustrates the usage for the function:
CUdeviceptr ptr;
// `ptr`: address in the address range previously reserved by cuMemAddressReserve.
// `allocHandle`: CUmemGenericAllocationHandle obtained by a previous call to cuMemCreate.
CUresult result = cuMemMap(ptr, size, 0, allocHandle, 0);
10.7. Controlling Access Rights
The Virtual Memory Management APIs enable applications to explicitly protect their VA ranges with access control mechanisms. Mapping the allocation to a region of the address range using cuMemMap does not make the address accessible, and would result in a program crash if accessed by a CUDA kernel. Users must specifically select access control using the cuMemSetAccess function, which allows or restricts access for specific devices to a mapped address range. The following code snippet illustrates the usage for the function:
void setAccessOnDevice(int device, CUdeviceptr ptr, size_t size) {
CUmemAccessDesc accessDesc = {};
accessDesc.location.type = CU_MEM_LOCATION_TYPE_DEVICE;
accessDesc.location.id = device;
accessDesc.flags = CU_MEM_ACCESS_FLAGS_PROT_READWRITE;
// Make the address accessible
cuMemSetAccess(ptr, size, &accessDesc, 1);
}
The access control mechanism exposed with Virtual Memory Management allows users to be explicit about which allocations they want to share with other peer devices on the system. As specified earlier, cudaEnablePeerAccess forces all prior and future cudaMalloc’d allocations to be mapped to the target peer device. This can be convenient in many cases as user doesn’t have to worry about tracking the mapping state of every allocation to every device in the system. But for users concerned with performance of their applications this approach has performance implications. With access control at allocation granularity Virtual Memory Management exposes a mechanism to have peer mappings with minimal overhead.
The vectorAddMMAP sample can be used as an example for using the Virtual Memory Management APIs.
10.8. Fabric Memory
CUDA 12.4 introduced a new VMM allocation handle type CU_MEM_HANDLE_TYPE_FABRIC. On supported platforms and provided the NVIDIA IMEX daemon
is running this allocation handle type enables sharing allocations not only intra node with any communication mechanism, e.g. MPI, but also inter
node. This allows GPUs in a Multi Node NVLINK System to map the memory of all other GPUs part of the same NVLINK fabric even if they are in
different nodes greatly increasing the scale of multi-GPU Programming with NVLINK.
10.8.1. Query for Support
Before attempting to use Fabric Memory, applications must ensure that the devices they want to use support Fabric Memory. The following code sample shows querying for Fabric Memory support:
int deviceSupportsFabricMem;
CUresult result = cuDeviceGetAttribute(&deviceSupportsFabricMem, CU_DEVICE_ATTRIBUTE_HANDLE_TYPE_FABRIC_SUPPORTED, device);
if (deviceSupportsFabricMem != 0) {
// `device` supports Fabric Memory
}
Aside from using CU_MEM_HANDLE_TYPE_FABRIC as handle type and not requiring OS native mechanisms for inter process communication to exchange
sharable handles there is no difference in using Fabric Memory compared to other allocation handle types.
10.9. Multicast Support
The Multicast Object Management APIs provide a way for the application to create Multicast Objects and in combination with the Virtual Memory Management APIs described above allow applications to leverage NVLINK SHARP on supported NVLINK connected GPUs if they are connected with NVSWITCH. NVLINK SHARP allows CUDA applications to leverage in fabric computing to accelerate operations like broadcast and reductions between GPUs connected with NVSWITCH. For this to work multiple NVLINK connected GPUs form a Multicast Team and each GPU from the team backs up a Multicast Object with physical memory. So a Multicast Team of N GPUs has N physical replicas, each local to one participating GPU, of a Multicast Object. The multimem PTX instructions using mappings of Multicast Objects work with all replicas of the Multicast Object.
To work with Multicast Objects an application needs to
Query Multicast Support
Create a Multicast Handle with
cuMulticastCreate.Share the Multicast Handle with all processes that control a GPU which should participate in a Multicast Team. This works with
cuMemExportToShareableHandleas described above.Add all GPUs that should participate in the Multicast Team with
cuMulticastAddDevice.For each participating GPU bind physical memory allocated with
cuMemCreateas described above to the Multicast Handle. All devices need to be added to the Multicast Team before binding memory on any device.Reserve an address range, map the Multicast Handle and set Access Rights as described above for regular Unicast mappings. Unicast and Multicast mappings to the same physical memory are possible. See the Virtual Aliasing Support section above how to ensure consistency between multiple mappings to the same physical memory.
Use the multimem PTX instructions with the multicast mappings.
The multi_node_p2p example in the Multi GPU Programming Models GitHub
repository contains a complete example using Fabric Memory including Multicast Objects to leverage NVLINK SHARP. Please note that this example is
for developers of libraries like NCCL or NVSHMEM. It shows how higher-level programming models like NVSHMEM work internally within a (multinode)
NVLINK domain. Application developers generally should use the higher-level MPI, NCCL, or NVSHMEM interfaces instead of this API.
10.9.1. Query for Support
Before attempting to use Multicast Objects, applications must ensure that the devices they want to use support them. The following code sample shows querying for Fabric Memory support:
int deviceSupportsMultiCast;
CUresult result = cuDeviceGetAttribute(&deviceSupportsMultiCast, CU_DEVICE_ATTRIBUTE_MULTICAST_SUPPORTED, device);
if (deviceSupportsMultiCast != 0) {
// `device` supports Multicast Objects
}
10.9.2. Allocating Multicast Objects
Multicast Objects can be created with cuMulticastCreate:
CUmemGenericAllocationHandle createMCHandle(int numDevices, size_t size) {
CUmemAllocationProp mcProp = {};
mcProp.numDevices = numDevices;
mcProp.handleTypes = CU_MEM_HANDLE_TYPE_FABRIC; // or on single node CU_MEM_HANDLE_TYPE_POSIX_FILE_DESCRIPTOR
size_t granularity = 0;
cuMulticastGetGranularity(&granularity, &mcProp, CU_MEM_ALLOC_GRANULARITY_MINIMUM);
// Ensure size matches granularity requirements for the allocation
size_t padded_size = ROUND_UP(size, granularity);
mcProp.size = padded_size;
// Create Multicast Object this has no devices and no physical memory associated yet
CUmemGenericAllocationHandle mcHandle;
cuMulticastCreate(&mcHandle, &mcProp);
return mcHandle;
}
10.9.3. Add Devices to Multicast Objects
Devices can be added to a Multicast Team with cuMulticastAddDevice:
cuMulticastAddDevice(&mcHandle, device);
This step needs to be completed on all processes controlling devices that should participate in a Multicast Team before memory on any device is bound to the Multicast Object.
10.9.4. Bind Memory to Multicast Objects
After a Multicast Object has been created and all participating devices have been added to the Multicast Object it needs to be backed with
physical memory allocated with cuMemCreate for each device:
cuMulticastBindMem(mcHandle, mcOffset, memHandle, memOffset, size, 0 /*flags*/);
10.9.5. Use Multicast Mappings
To use Multicast Mappings in CUDA C++ it is required to use the multimem PTX instructions with Inline PTX Assembly:
__global__ void all_reduce_norm_barrier_kernel(float* l2_norm,
float* partial_l2_norm_mc,
unsigned int* arrival_counter_uc, unsigned int* arrival_counter_mc,
const unsigned int expected_count) {
assert( 1 == blockDim.x * blockDim.y * blockDim.z * gridDim.x * gridDim.y * gridDim.z );
float l2_norm_sum = 0.0;
#if __CUDA_ARCH__ >= 900
// atomic reduction to all replicas
// this can be conceptually thought of as __threadfence_system(); atomicAdd_system(arrival_counter_mc, 1);
asm volatile ("multimem.red.release.sys.global.add.u32 [%0], %1;" :: "l"(arrival_counter_mc), "n"(1) : "memory");
// Need a fence between Multicast (mc) and Unicast (uc) access to the same memory `arrival_counter_uc` and `arrival_counter_mc`:
// - fence.proxy instructions establish an ordering between memory accesses that may happen through different proxies
// - Value .alias of the .proxykind qualifier refers to memory accesses performed using virtually aliased addresses to the same memory location.
// from https://docs.nvidia.com/cuda/parallel-thread-execution/#parallel-synchronization-and-communication-instructions-membar
asm volatile ("fence.proxy.alias;" ::: "memory");
// spin wait with acquire ordering on UC mapping till all peers have arrived in this iteration
// Note: all ranks need to reach another barrier after this kernel, such that it is not possible for the barrier to be unblocked by an
// arrival of a rank for the next iteration if some other rank is slow.
cuda::atomic_ref<unsigned int,cuda::thread_scope_system> ac(arrival_counter_uc);
while (expected_count > ac.load(cuda::memory_order_acquire));
// Atomic load reduction from all replicas. It does not provide ordering so it can be relaxed.
asm volatile ("multimem.ld_reduce.relaxed.sys.global.add.f32 %0, [%1];" : "=f"(l2_norm_sum) : "l"(partial_l2_norm_mc) : "memory");
#else
#error "ERROR: multimem instructions require compute capability 9.0 or larger."
#endif
*l2_norm = std::sqrt(l2_norm_sum);
}
11. Stream Ordered Memory Allocator
11.1. Introduction
Managing memory allocations using cudaMalloc and cudaFree causes GPU to synchronize across all executing CUDA streams. The Stream Order Memory Allocator enables applications to order memory allocation and deallocation with other work launched into a CUDA stream such as kernel launches and asynchronous copies. This improves application memory use by taking advantage of stream-ordering semantics to reuse memory allocations. The allocator also allows applications to control the allocator’s memory caching behavior. When set up with an appropriate release threshold, the caching behavior allows the allocator to avoid expensive calls into the OS when the application indicates it is willing to accept a bigger memory footprint. The allocator also supports the easy and secure sharing of allocations between processes.
For many applications, the Stream Ordered Memory Allocator reduces the need for custom memory management abstractions, and makes it easier to create high-performance custom memory management for applications that need it. For applications and libraries that already have custom memory allocators, adopting the Stream Ordered Memory Allocator enables multiple libraries to share a common pool of memory managed by the driver, thus reducing excess memory consumption. Additionally, the driver can perform optimizations based on its awareness of the allocator and other stream management APIs. Finally, Nsight Compute and the Next-Gen CUDA debugger is aware of the allocator as part of their CUDA 11.3 toolkit support.
11.2. Query for Support
The user can determine whether or not a device supports the stream ordered memory allocator by calling cudaDeviceGetAttribute() with the device attribute cudaDevAttrMemoryPoolsSupported.
Starting with CUDA 11.3, IPC memory pool support can be queried with the cudaDevAttrMemoryPoolSupportedHandleTypes device attribute. Previous drivers will return cudaErrorInvalidValue as those drivers are unaware of the attribute enum.
int driverVersion = 0;
int deviceSupportsMemoryPools = 0;
int poolSupportedHandleTypes = 0;
cudaDriverGetVersion(&driverVersion);
if (driverVersion >= 11020) {
cudaDeviceGetAttribute(&deviceSupportsMemoryPools,
cudaDevAttrMemoryPoolsSupported, device);
}
if (deviceSupportsMemoryPools != 0) {
// `device` supports the Stream Ordered Memory Allocator
}
if (driverVersion >= 11030) {
cudaDeviceGetAttribute(&poolSupportedHandleTypes,
cudaDevAttrMemoryPoolSupportedHandleTypes, device);
}
if (poolSupportedHandleTypes & cudaMemHandleTypePosixFileDescriptor) {
// Pools on the specified device can be created with posix file descriptor-based IPC
}
Performing the driver version check before the query avoids hitting a cudaErrorInvalidValue error on drivers where the attribute was not yet defined. One can use cudaGetLastError to clear the error instead of avoiding it.
11.3. API Fundamentals (cudaMallocAsync and cudaFreeAsync)
The APIs cudaMallocAsync and cudaFreeAsync form the core of the allocator. cudaMallocAsync returns an allocation and cudaFreeAsync frees an allocation. Both APIs accept stream arguments to define when the allocation will become and stop being available for use. The pointer value returned by cudaMallocAsync is determined synchronously and is available for constructing future work. It is important to note that cudaMallocAsync ignores the current device/context when determining where the allocation will reside. Instead, cudaMallocAsync determines the resident device based on the specified memory pool or the supplied stream. The simplest use pattern is when the memory is allocated, used, and freed back into the same stream.
void *ptr;
size_t size = 512;
cudaMallocAsync(&ptr, size, cudaStreamPerThread);
// do work using the allocation
kernel<<<..., cudaStreamPerThread>>>(ptr, ...);
// An asynchronous free can be specified without synchronizing the cpu and GPU
cudaFreeAsync(ptr, cudaStreamPerThread);
When using an allocation in a stream other than the allocating stream, the user must guarantee that the access will happen after the allocation operation, otherwise the behavior is undefined. The user may make this guarantee either by synchronizing the allocating stream, or by using CUDA events to synchronize the producing and consuming streams.
cudaFreeAsync() inserts a free operation into the stream. The user must guarantee that the free operation happens after the allocation operation and any use of the allocation. Also, any use of the allocation after the free operation starts results in undefined behavior. Events and/or stream synchronizing operations should be used to guarantee any access to the allocation on other streams is complete before the freeing stream begins the free operation.
cudaMallocAsync(&ptr, size, stream1);
cudaEventRecord(event1, stream1);
//stream2 must wait for the allocation to be ready before accessing
cudaStreamWaitEvent(stream2, event1);
kernel<<<..., stream2>>>(ptr, ...);
cudaEventRecord(event2, stream2);
// stream3 must wait for stream2 to finish accessing the allocation before
// freeing the allocation
cudaStreamWaitEvent(stream3, event2);
cudaFreeAsync(ptr, stream3);
The user can free allocations allocated with cudaMalloc() with cudaFreeAsync(). The user must make the same guarantees about accesses being complete before the free operation begins.
cudaMalloc(&ptr, size);
kernel<<<..., stream>>>(ptr, ...);
cudaFreeAsync(ptr, stream);
The user can free memory allocated with cudaMallocAsync with cudaFree(). When freeing such allocations through the cudaFree() API, the driver assumes that all accesses to the allocation are complete and performs no further synchronization. The user can use cudaStreamQuery / cudaStreamSynchronize / cudaEventQuery / cudaEventSynchronize / cudaDeviceSynchronize to guarantee that the appropriate asynchronous work is complete and that the GPU will not try to access the allocation.
cudaMallocAsync(&ptr, size,stream);
kernel<<<..., stream>>>(ptr, ...);
// synchronize is needed to avoid prematurely freeing the memory
cudaStreamSynchronize(stream);
cudaFree(ptr);
11.4. Memory Pools and the cudaMemPool_t
Memory pools encapsulate virtual address and physical memory resources that are allocated and managed according to the pools attributes and properties. The primary aspect of a memory pool is the kind and location of memory it manages.
All calls to cudaMallocAsync use the resources of a memory pool. In the absence of a specified memory pool, cudaMallocAsync uses the current memory pool of the supplied stream’s device. The current memory pool for a device may be set with cudaDeviceSetMempool and queried with cudaDeviceGetMempool. By default (in the absence of a cudaDeviceSetMempool call), the current memory pool is the default memory pool of a device. The API cudaMallocFromPoolAsync and c++ overloads of cudaMallocAsync allow a user to specify the pool to be used for an allocation without setting it as the current pool. The APIs cudaDeviceGetDefaultMempool and cudaMemPoolCreate give users handles to memory pools.
Note
The mempool current to a device will be local to that device. So allocating without specifying a memory pool will always yield an allocation local to the stream’s device.
Note
cudaMemPoolSetAttribute and cudaMemPoolGetAttribute control the attributes of the memory pools.
11.5. Default/Implicit Pools
The default memory pool of a device may be retrieved with the cudaDeviceGetDefaultMempool API. Allocations from the default memory pool of a device are non-migratable device allocation located on that device. These allocations will always be accessible from that device. The accessibility of the default memory pool may be modified with cudaMemPoolSetAccess and queried by cudaMemPoolGetAccess. Since the default pools do not need to be explicitly created, they are sometimes referred to as implicit pools. The default memory pool of a device does not support IPC.
11.6. Explicit Pools
The API cudaMemPoolCreate creates an explicit pool. This allows applications to request properties for their allocation beyond what is provided by the default/implict pools. These include properties such as IPC capability, maximum pool size, allocations resident on a specific CPU NUMA node on supported platforms etc.
// create a pool similar to the implicit pool on device 0
int device = 0;
cudaMemPoolProps poolProps = { };
poolProps.allocType = cudaMemAllocationTypePinned;
poolProps.location.id = device;
poolProps.location.type = cudaMemLocationTypeDevice;
cudaMemPoolCreate(&memPool, &poolProps));
The following code snippet illustrates an example of creating an IPC capable memory pool on a valid CPU NUMA node.
// create a pool resident on a CPU NUMA node that is capable of IPC sharing (via a file descriptor).
int cpu_numa_id = 0;
cudaMemPoolProps poolProps = { };
poolProps.allocType = cudaMemAllocationTypePinned;
poolProps.location.id = cpu_numa_id;
poolProps.location.type = cudaMemLocationTypeHostNuma;
poolProps.handleType = cudaMemHandleTypePosixFileDescriptor;
cudaMemPoolCreate(&ipcMemPool, &poolProps));
11.7. Physical Page Caching Behavior
By default, the allocator tries to minimize the physical memory owned by a pool. To minimize the OS calls to allocate and free physical memory, applications must configure a memory footprint for each pool. Applications can do this with the release threshold attribute (cudaMemPoolAttrReleaseThreshold).
The release threshold is the amount of memory in bytes a pool should hold onto before trying to release memory back to the OS. When more than the release threshold bytes of memory are held by the memory pool, the allocator will try to release memory back to the OS on the next call to stream, event or device synchronize. Setting the release threshold to UINT64_MAX will prevent the driver from attempting to shrink the pool after every synchronization.
Cuuint64_t setVal = UINT64_MAX;
cudaMemPoolSetAttribute(memPool, cudaMemPoolAttrReleaseThreshold, &setVal);
Applications that set cudaMemPoolAttrReleaseThreshold high enough to effectively disable memory pool shrinking may wish to explicitly shrink a memory pool’s memory footprint. cudaMemPoolTrimTo allows such applications to do so. When trimming a memory pool’s footprint, the minBytesToKeep parameter allows an application to hold onto an amount of memory it expects to need in a subsequent phase of execution.
Cuuint64_t setVal = UINT64_MAX;
cudaMemPoolSetAttribute(memPool, cudaMemPoolAttrReleaseThreshold, &setVal);
// application phase needing a lot of memory from the stream ordered allocator
for (i=0; i<10; i++) {
for (j=0; j<10; j++) {
cudaMallocAsync(&ptrs[j],size[j], stream);
}
kernel<<<...,stream>>>(ptrs,...);
for (j=0; j<10; j++) {
cudaFreeAsync(ptrs[j], stream);
}
}
// Process does not need as much memory for the next phase.
// Synchronize so that the trim operation will know that the allocations are no
// longer in use.
cudaStreamSynchronize(stream);
cudaMemPoolTrimTo(mempool, 0);
// Some other process/allocation mechanism can now use the physical memory
// released by the trimming operation.
11.8. Resource Usage Statistics
In CUDA 11.3, the pool attributes cudaMemPoolAttrReservedMemCurrent, cudaMemPoolAttrReservedMemHigh, cudaMemPoolAttrUsedMemCurrent, and cudaMemPoolAttrUsedMemHigh were added to query the memory usage of a pool.
Querying the cudaMemPoolAttrReservedMemCurrent attribute of a pool reports the current total physical GPU memory consumed by the pool. Querying the cudaMemPoolAttrUsedMemCurrent of a pool returns the total size of all of the memory allocated from the pool and not available for reuse.
ThecudaMemPoolAttr*MemHigh attributes are watermarks recording the max value achieved by the respective cudaMemPoolAttr*MemCurrent attribute since last reset. They can be reset to the current value by using the cudaMemPoolSetAttribute API.
// sample helper functions for getting the usage statistics in bulk
struct usageStatistics {
cuuint64_t reserved;
cuuint64_t reservedHigh;
cuuint64_t used;
cuuint64_t usedHigh;
};
void getUsageStatistics(cudaMemoryPool_t memPool, struct usageStatistics *statistics)
{
cudaMemPoolGetAttribute(memPool, cudaMemPoolAttrReservedMemCurrent, statistics->reserved);
cudaMemPoolGetAttribute(memPool, cudaMemPoolAttrReservedMemHigh, statistics->reservedHigh);
cudaMemPoolGetAttribute(memPool, cudaMemPoolAttrUsedMemCurrent, statistics->used);
cudaMemPoolGetAttribute(memPool, cudaMemPoolAttrUsedMemHigh, statistics->usedHigh);
}
// resetting the watermarks will make them take on the current value.
void resetStatistics(cudaMemoryPool_t memPool)
{
cuuint64_t value = 0;
cudaMemPoolSetAttribute(memPool, cudaMemPoolAttrReservedMemHigh, &value);
cudaMemPoolSetAttribute(memPool, cudaMemPoolAttrUsedMemHigh, &value);
}
11.9. Memory Reuse Policies
In order to service an allocation request, the driver attempts to reuse memory that was previously freed via cudaFreeAsync() before attempting to allocate more memory from the OS. For example, memory freed in a stream can immediately be reused for a subsequent allocation request in the same stream. Similarly, when a stream is synchronized with the CPU, the memory that was previously freed in that stream becomes available for reuse for an allocation in any stream.
The stream ordered allocator has a few controllable allocation policies. The pool attributes cudaMemPoolReuseFollowEventDependencies, cudaMemPoolReuseAllowOpportunistic, and cudaMemPoolReuseAllowInternalDependencies control these policies. Upgrading to a newer CUDA driver may change, enhance, augment and/or reorder the reuse policies.
11.9.1. cudaMemPoolReuseFollowEventDependencies
Before allocating more physical GPU memory, the allocator examines dependency information established by CUDA events and tries to allocate from memory freed in another stream.
cudaMallocAsync(&ptr, size, originalStream);
kernel<<<..., originalStream>>>(ptr, ...);
cudaFreeAsync(ptr, originalStream);
cudaEventRecord(event,originalStream);
// waiting on the event that captures the free in another stream
// allows the allocator to reuse the memory to satisfy
// a new allocation request in the other stream when
// cudaMemPoolReuseFollowEventDependencies is enabled.
cudaStreamWaitEvent(otherStream, event);
cudaMallocAsync(&ptr2, size, otherStream);
11.9.2. cudaMemPoolReuseAllowOpportunistic
According to the cudaMemPoolReuseAllowOpportunistic policy, the allocator examines freed allocations to see if the free’s stream order semantic has been met (such as the stream has passed the point of execution indicated by the free). When this is disabled, the allocator will still reuse memory made available when a stream is synchronized with the CPU. Disabling this policy does not stop the cudaMemPoolReuseFollowEventDependencies from applying.
cudaMallocAsync(&ptr, size, originalStream);
kernel<<<..., originalStream>>>(ptr, ...);
cudaFreeAsync(ptr, originalStream);
// after some time, the kernel finishes running
wait(10);
// When cudaMemPoolReuseAllowOpportunistic is enabled this allocation request
// can be fulfilled with the prior allocation based on the progress of originalStream.
cudaMallocAsync(&ptr2, size, otherStream);
11.9.3. cudaMemPoolReuseAllowInternalDependencies
Failing to allocate and map more physical memory from the OS, the driver will look for memory whose availability depends on another stream’s pending progress. If such memory is found, the driver will insert the required dependency into the allocating stream and reuse the memory.
cudaMallocAsync(&ptr, size, originalStream);
kernel<<<..., originalStream>>>(ptr, ...);
cudaFreeAsync(ptr, originalStream);
// When cudaMemPoolReuseAllowInternalDependencies is enabled
// and the driver fails to allocate more physical memory, the driver may
// effectively perform a cudaStreamWaitEvent in the allocating stream
// to make sure that future work in ‘otherStream’ happens after the work
// in the original stream that would be allowed to access the original allocation.
cudaMallocAsync(&ptr2, size, otherStream);
11.9.4. Disabling Reuse Policies
While the controllable reuse policies improve memory reuse, users may want to disable them. Allowing opportunistic reuse (such as cudaMemPoolReuseAllowOpportunistic) introduces run to run variance in allocation patterns based on the interleaving of CPU and GPU execution. Internal dependency insertion (such as cudaMemPoolReuseAllowInternalDependencies) can serialize work in unexpected and potentially non-deterministic ways when the user would rather explicitly synchronize an event or stream on allocation failure.
11.10. Device Accessibility for Multi-GPU Support
Just like allocation accessibility controlled through the virtual memory management APIs, memory pool allocation accessibility does not follow cudaDeviceEnablePeerAccess or cuCtxEnablePeerAccess. Instead, the API cudaMemPoolSetAccess modifies what devices can access allocations from a pool. By default, allocations are accessible from the device where the allocations are located. This access cannot be revoked. To enable access from other devices, the accessing device must be peer capable with the memory pool’s device; check with cudaDeviceCanAccessPeer. If the peer capability is not checked, the set access may fail with cudaErrorInvalidDevice. If no allocations had been made from the pool, the cudaMemPoolSetAccess call may succeed even when the devices are not peer capable; in this case, the next allocation from the pool will fail.
It is worth noting that cudaMemPoolSetAccess affects all allocations from the memory pool, not just future ones. Also the accessibility reported by cudaMemPoolGetAccess applies to all allocations from the pool, not just future ones. It is recommended that the accessibility settings of a pool for a given GPU not be changed frequently; once a pool is made accessible from a given GPU, it should remain accessible from that GPU for the lifetime of the pool.
// snippet showing usage of cudaMemPoolSetAccess:
cudaError_t setAccessOnDevice(cudaMemPool_t memPool, int residentDevice,
int accessingDevice) {
cudaMemAccessDesc accessDesc = {};
accessDesc.location.type = cudaMemLocationTypeDevice;
accessDesc.location.id = accessingDevice;
accessDesc.flags = cudaMemAccessFlagsProtReadWrite;
int canAccess = 0;
cudaError_t error = cudaDeviceCanAccessPeer(&canAccess, accessingDevice,
residentDevice);
if (error != cudaSuccess) {
return error;
} else if (canAccess == 0) {
return cudaErrorPeerAccessUnsupported;
}
// Make the address accessible
return cudaMemPoolSetAccess(memPool, &accessDesc, 1);
}
11.11. IPC Memory Pools
IPC capable memory pools allow easy, efficient and secure sharing of GPU memory between processes. CUDA’s IPC memory pools provide the same security benefits as CUDA’s virtual memory management APIs.
There are two phases to sharing memory between processes with memory pools. The processes first need to share access to the pool, then share specific allocations from that pool. The first phase establishes and enforces security. The second phase coordinates what virtual addresses are used in each process and when mappings need to be valid in the importing process.
11.11.1. Creating and Sharing IPC Memory Pools
Sharing access to a pool involves retrieving an OS native handle to the pool (with the cudaMemPoolExportToShareableHandle() API), transferring the handle to the importing process using the usual OS native IPC mechanisms, and creating an imported memory pool (with the cudaMemPoolImportFromShareableHandle() API). For cudaMemPoolExportToShareableHandle to succeed, the memory pool had to be created with the requested handle type specified in the pool properties structure. Please reference samples for the appropriate IPC mechanisms to transfer the OS native handle between processes. The rest of the procedure can be found in the following code snippets.
// in exporting process
// create an exportable IPC capable pool on device 0
cudaMemPoolProps poolProps = { };
poolProps.allocType = cudaMemAllocationTypePinned;
poolProps.location.id = 0;
poolProps.location.type = cudaMemLocationTypeDevice;
// Setting handleTypes to a non zero value will make the pool exportable (IPC capable)
poolProps.handleTypes = CU_MEM_HANDLE_TYPE_POSIX_FILE_DESCRIPTOR;
cudaMemPoolCreate(&memPool, &poolProps));
// FD based handles are integer types
int fdHandle = 0;
// Retrieve an OS native handle to the pool.
// Note that a pointer to the handle memory is passed in here.
cudaMemPoolExportToShareableHandle(&fdHandle,
memPool,
CU_MEM_HANDLE_TYPE_POSIX_FILE_DESCRIPTOR,
0);
// The handle must be sent to the importing process with the appropriate
// OS specific APIs.
// in importing process
int fdHandle;
// The handle needs to be retrieved from the exporting process with the
// appropriate OS specific APIs.
// Create an imported pool from the shareable handle.
// Note that the handle is passed by value here.
cudaMemPoolImportFromShareableHandle(&importedMemPool,
(void*)fdHandle,
CU_MEM_HANDLE_TYPE_POSIX_FILE_DESCRIPTOR,
0);
11.11.2. Set Access in the Importing Process
Imported memory pools are initially only accessible from their resident device. The imported memory pool does not inherit any accessibility set by the exporting process. The importing process needs to enable access (with cudaMemPoolSetAccess) from any GPU it plans to access the memory from.
If the imported memory pool belongs to a non-visible device in the importing process, the user must use the cudaMemPoolSetAccess API to enable access from the GPUs the allocations will be used on.
11.11.3. Creating and Sharing Allocations from an Exported Pool
Once the pool has been shared, allocations made with cudaMallocAsync() from the pool in the exporting process can be shared with other processes that have imported the pool. Since the pool’s security policy is established and verified at the pool level, the OS does not need extra bookkeeping to provide security for specific pool allocations; In other words, the opaque cudaMemPoolPtrExportData required to import a pool allocation may be sent to the importing process using any mechanism.
While allocations may be exported and even imported without synchronizing with the allocating stream in any way, the importing process must follow the same rules as the exporting process when accessing the allocation. Namely, access to the allocation must happen after the stream ordering of the allocation operation in the allocating stream. The two following code snippets show cudaMemPoolExportPointer() and cudaMemPoolImportPointer() sharing the allocation with an IPC event used to guarantee that the allocation isn’t accessed in the importing process before the allocation is ready.
// preparing an allocation in the exporting process
cudaMemPoolPtrExportData exportData;
cudaEvent_t readyIpcEvent;
cudaIpcEventHandle_t readyIpcEventHandle;
// ipc event for coordinating between processes
// cudaEventInterprocess flag makes the event an ipc event
// cudaEventDisableTiming is set for performance reasons
cudaEventCreate(
&readyIpcEvent, cudaEventDisableTiming | cudaEventInterprocess)
// allocate from the exporting mem pool
cudaMallocAsync(&ptr, size,exportMemPool, stream);
// event for sharing when the allocation is ready.
cudaEventRecord(readyIpcEvent, stream);
cudaMemPoolExportPointer(&exportData, ptr);
cudaIpcGetEventHandle(&readyIpcEventHandle, readyIpcEvent);
// Share IPC event and pointer export data with the importing process using
// any mechanism. Here we copy the data into shared memory
shmem->ptrData = exportData;
shmem->readyIpcEventHandle = readyIpcEventHandle;
// signal consumers data is ready
// Importing an allocation
cudaMemPoolPtrExportData *importData = &shmem->prtData;
cudaEvent_t readyIpcEvent;
cudaIpcEventHandle_t *readyIpcEventHandle = &shmem->readyIpcEventHandle;
// Need to retrieve the ipc event handle and the export data from the
// exporting process using any mechanism. Here we are using shmem and just
// need synchronization to make sure the shared memory is filled in.
cudaIpcOpenEventHandle(&readyIpcEvent, readyIpcEventHandle);
// import the allocation. The operation does not block on the allocation being ready.
cudaMemPoolImportPointer(&ptr, importedMemPool, importData);
// Wait for the prior stream operations in the allocating stream to complete before
// using the allocation in the importing process.
cudaStreamWaitEvent(stream, readyIpcEvent);
kernel<<<..., stream>>>(ptr, ...);
When freeing the allocation, the allocation needs to be freed in the importing process before it is freed in the exporting process. The following code snippet demonstrates the use of CUDA IPC events to provide the required synchronization between the cudaFreeAsync operations in both processes. Access to the allocation from the importing process is obviously restricted by the free operation in the importing process side. It is worth noting that cudaFree can be used to free the allocation in both processes and that other stream synchronization APIs may be used instead of CUDA IPC events.
// The free must happen in importing process before the exporting process
kernel<<<..., stream>>>(ptr, ...);
// Last access in importing process
cudaFreeAsync(ptr, stream);
// Access not allowed in the importing process after the free
cudaIpcEventRecord(finishedIpcEvent, stream);
// Exporting process
// The exporting process needs to coordinate its free with the stream order
// of the importing process’s free.
cudaStreamWaitEvent(stream, finishedIpcEvent);
kernel<<<..., stream>>>(ptrInExportingProcess, ...);
// The free in the importing process doesn’t stop the exporting process
// from using the allocation.
cudFreeAsync(ptrInExportingProcess,stream);
11.11.4. IPC Export Pool Limitations
IPC pools currently do not support releasing physical blocks back to the OS. As a result the cudaMemPoolTrimTo API acts as a no-op and the cudaMemPoolAttrReleaseThreshold effectively gets ignored. This behavior is controlled by the driver, not the runtime and may change in a future driver update.
11.11.5. IPC Import Pool Limitations
Allocating from an import pool is not allowed; specifically, import pools cannot be set current and cannot be used in the cudaMallocFromPoolAsync API. As such, the allocation reuse policy attributes are meaningless for these pools.
IPC pools currently do not support releasing physical blocks back to the OS. As a result the cudaMemPoolTrimTo API acts as a no-op and the cudaMemPoolAttrReleaseThreshold effectively gets ignored.
The resource usage stat attribute queries only reflect the allocations imported into the process and the associated physical memory.
11.12. Synchronization API Actions
One of the optimizations that comes with the allocator being part of the CUDA driver is integration with the synchronize APIs. When the user requests that the CUDA driver synchronize, the driver waits for asynchronous work to complete. Before returning, the driver will determine what frees the synchronization guaranteed to be completed. These allocations are made available for allocation regardless of specified stream or disabled allocation policies. The driver also checks cudaMemPoolAttrReleaseThreshold here and releases any excess physical memory that it can.
11.13. Addendums
11.13.1. cudaMemcpyAsync Current Context/Device Sensitivity
In the current CUDA driver, any async memcpy involving memory from cudaMallocAsync should be done using the specified stream’s context as the calling thread’s current context. This is not necessary for cudaMemcpyPeerAsync, as the device primary contexts specified in the API are referenced instead of the current context.
11.13.2. cuPointerGetAttribute Query
Invoking cuPointerGetAttribute on an allocation after invoking cudaFreeAsync on it results in undefined behavior. Specifically, it does not matter if an allocation is still accessible from a given stream: the behavior is still undefined.
11.13.3. cuGraphAddMemsetNode
cuGraphAddMemsetNode does not work with memory allocated via the stream ordered allocator. However, memsets of the allocations can be stream captured.
11.13.4. Pointer Attributes
The cuPointerGetAttributes query works on stream ordered allocations. Since stream ordered allocations are not context associated, querying CU_POINTER_ATTRIBUTE_CONTEXT will succeed but return NULL in *data. The attribute CU_POINTER_ATTRIBUTE_DEVICE_ORDINAL can be used to determine the location of the allocation: this can be useful when selecting a context for making p2h2p copies using cudaMemcpyPeerAsync. The attribute CU_POINTER_ATTRIBUTE_MEMPOOL_HANDLE was added in CUDA 11.3 and can be useful for debugging and for confirming which pool an allocation comes from before doing IPC.
12. Graph Memory Nodes
12.1. Introduction
Graph memory nodes allow graphs to create and own memory allocations. Graph memory nodes have GPU ordered lifetime semantics, which dictate when memory is allowed to be accessed on the device. These GPU ordered lifetime semantics enable driver-managed memory reuse, and match those of the stream ordered allocation APIs cudaMallocAsync and cudaFreeAsync, which may be captured when creating a graph.
Graph allocations have fixed addresses over the life of a graph including repeated instantiations and launches. This allows the memory to be directly referenced by other operations within the graph without the need of a graph update, even when CUDA changes the backing physical memory. Within a graph, allocations whose graph ordered lifetimes do not overlap may use the same underlying physical memory.
CUDA may reuse the same physical memory for allocations across multiple graphs, aliasing virtual address mappings according to the GPU ordered lifetime semantics. For example when different graphs are launched into the same stream, CUDA may virtually alias the same physical memory to satisfy the needs of allocations which have single-graph lifetimes.
12.2. Support and Compatibility
Graph memory nodes require an 11.4 capable CUDA driver and support for the stream ordered allocator on the GPU. The following snippet shows how to check for support on a given device.
int driverVersion = 0;
int deviceSupportsMemoryPools = 0;
int deviceSupportsMemoryNodes = 0;
cudaDriverGetVersion(&driverVersion);
if (driverVersion >= 11020) { // avoid invalid value error in cudaDeviceGetAttribute
cudaDeviceGetAttribute(&deviceSupportsMemoryPools, cudaDevAttrMemoryPoolsSupported, device);
}
deviceSupportsMemoryNodes = (driverVersion >= 11040) && (deviceSupportsMemoryPools != 0);
Doing the attribute query inside the driver version check avoids an invalid value return code on 11.0 and 11.1 drivers. Be aware that the compute sanitizer emits warnings when it detects CUDA returning error codes, and a version check before reading the attribute will avoid this. Graph memory nodes are only supported on driver versions 11.4 and newer.
12.3. API Fundamentals
Graph memory nodes are graph nodes representing either memory allocation or free actions. As a shorthand, nodes that allocate memory are called allocation nodes. Likewise, nodes that free memory are called free nodes. Allocations created by allocation nodes are called graph allocations. CUDA assigns virtual addresses for the graph allocation at node creation time. While these virtual addresses are fixed for the lifetime of the allocation node, the allocation contents are not persistent past the freeing operation and may be overwritten by accesses referring to a different allocation.
Graph allocations are considered recreated every time a graph runs. A graph allocation’s lifetime, which differs from the node’s lifetime, begins when GPU execution reaches the allocating graph node and ends when one of the following occurs:
GPU execution reaches the freeing graph node
GPU execution reaches the freeing
cudaFreeAsync()stream callimmediately upon the freeing call to
cudaFree()
Note
Graph destruction does not automatically free any live graph-allocated memory, even though it ends the lifetime of the allocation node. The allocation must subsequently be freed in another graph, or using cudaFreeAsync()/cudaFree().
Just like other Graph Structure, graph memory nodes are ordered within a graph by dependency edges. A program must guarantee that operations accessing graph memory:
are ordered after the allocation node
are ordered before the operation freeing the memory
Graph allocation lifetimes begin and usually end according to GPU execution (as opposed to API invocation). GPU ordering is the order that work runs on the GPU as opposed to the order that the work is enqueued or described. Thus, graph allocations are considered ‘GPU ordered.’
12.3.1. Graph Node APIs
Graph memory nodes may be explicitly created with the memory node creation APIs, cudaGraphAddMemAllocNode and cudaGraphAddMemFreeNode. The address allocated by cudaGraphAddMemAllocNode is returned to the user in the dptr field of the passed CUDA_MEM_ALLOC_NODE_PARAMS structure. All operations using graph allocations inside the allocating graph must be ordered after the allocating node. Similarly, any free nodes must be ordered after all uses of the allocation within the graph. cudaGraphAddMemFreeNode creates free nodes.
In the following figure, there is an example graph with an alloc and a free node. Kernel nodes a, b, and c are ordered after the allocation node and before the free node such that the kernels can access the allocation. Kernel node e is not ordered after the alloc node and therefore cannot safely access the memory. Kernel node d is not ordered before the free node, therefore it cannot safely access the memory.
Figure 28 Kernel Nodes
The following code snippet establishes the graph in this figure:
// Create the graph - it starts out empty
cudaGraphCreate(&graph, 0);
// parameters for a basic allocation
cudaMemAllocNodeParams params = {};
params.poolProps.allocType = cudaMemAllocationTypePinned;
params.poolProps.location.type = cudaMemLocationTypeDevice;
// specify device 0 as the resident device
params.poolProps.location.id = 0;
params.bytesize = size;
cudaGraphAddMemAllocNode(&allocNode, graph, NULL, 0, ¶ms);
nodeParams->kernelParams[0] = params.dptr;
cudaGraphAddKernelNode(&a, graph, &allocNode, 1, &nodeParams);
cudaGraphAddKernelNode(&b, graph, &a, 1, &nodeParams);
cudaGraphAddKernelNode(&c, graph, &a, 1, &nodeParams);
cudaGraphNode_t dependencies[2];
// kernel nodes b and c are using the graph allocation, so the freeing node must depend on them. Since the dependency of node b on node a establishes an indirect dependency, the free node does not need to explicitly depend on node a.
dependencies[0] = b;
dependencies[1] = c;
cudaGraphAddMemFreeNode(&freeNode, graph, dependencies, 2, params.dptr);
// free node does not depend on kernel node d, so it must not access the freed graph allocation.
cudaGraphAddKernelNode(&d, graph, &c, 1, &nodeParams);
// node e does not depend on the allocation node, so it must not access the allocation. This would be true even if the freeNode depended on kernel node e.
cudaGraphAddKernelNode(&e, graph, NULL, 0, &nodeParams);
12.3.2. Stream Capture
Graph memory nodes can be created by capturing the corresponding stream ordered allocation and free calls cudaMallocAsync and cudaFreeAsync. In this case, the virtual addresses returned by the captured allocation API can be used by other operations inside the graph. Since the stream ordered dependencies will be captured into the graph, the ordering requirements of the stream ordered allocation APIs guarantee that the graph memory nodes will be properly ordered with respect to the captured stream operations (for correctly written stream code).
Ignoring kernel nodes d and e, for clarity, the following code snippet shows how to use stream capture to create the graph from the previous figure:
cudaMallocAsync(&dptr, size, stream1);
kernel_A<<< ..., stream1 >>>(dptr, ...);
// Fork into stream2
cudaEventRecord(event1, stream1);
cudaStreamWaitEvent(stream2, event1);
kernel_B<<< ..., stream1 >>>(dptr, ...);
// event dependencies translated into graph dependencies, so the kernel node created by the capture of kernel C will depend on the allocation node created by capturing the cudaMallocAsync call.
kernel_C<<< ..., stream2 >>>(dptr, ...);
// Join stream2 back to origin stream (stream1)
cudaEventRecord(event2, stream2);
cudaStreamWaitEvent(stream1, event2);
// Free depends on all work accessing the memory.
cudaFreeAsync(dptr, stream1);
// End capture in the origin stream
cudaStreamEndCapture(stream1, &graph);
12.3.3. Accessing and Freeing Graph Memory Outside of the Allocating Graph
Graph allocations do not have to be freed by the allocating graph. When a graph does not free an allocation, that allocation persists beyond the execution of the graph and can be accessed by subsequent CUDA operations. These allocations may be accessed in another graph or directly using a stream operation as long as the accessing operation is ordered after the allocation through CUDA events and other stream ordering mechanisms. An allocation may subsequently be freed by regular calls to cudaFree, cudaFreeAsync, or by the launch of another graph with a corresponding free node, or a subsequent launch of the allocating graph (if it was instantiated with the cudaGraphInstantiateFlagAutoFreeOnLaunch flag). It is illegal to access memory after it has been freed - the free operation must be ordered after all operations accessing the memory using graph dependencies, CUDA events, and other stream ordering mechanisms.
Note
Because graph allocations may share underlying physical memory with each other, the Virtual Aliasing Support rules relating to consistency and coherency must be considered. Simply put, the free operation must be ordered after the full device operation (for example, compute kernel / memcpy) completes. Specifically, out of band synchronization - for example a handshake through memory as part of a compute kernel that accesses the graph-allocated memory - is not sufficient for providing ordering guarantees between the memory writes to graph memory and the free operation of that graph memory.
The following code snippets demonstrate accessing graph allocations outside of the allocating graph with ordering properly established by: using a single stream, using events between streams, and using events baked into the allocating and freeing graph.
Ordering established by using a single stream:
void *dptr;
cudaGraphAddMemAllocNode(&allocNode, allocGraph, NULL, 0, ¶ms);
dptr = params.dptr;
cudaGraphInstantiate(&allocGraphExec, allocGraph, NULL, NULL, 0);
cudaGraphLaunch(allocGraphExec, stream);
kernel<<< …, stream >>>(dptr, …);
cudaFreeAsync(dptr, stream);
Ordering established by recording and waiting on CUDA events:
void *dptr;
// Contents of allocating graph
cudaGraphAddMemAllocNode(&allocNode, allocGraph, NULL, 0, ¶ms);
dptr = params.dptr;
// contents of consuming/freeing graph
nodeParams->kernelParams[0] = params.dptr;
cudaGraphAddKernelNode(&a, graph, NULL, 0, &nodeParams);
cudaGraphAddMemFreeNode(&freeNode, freeGraph, &a, 1, dptr);
cudaGraphInstantiate(&allocGraphExec, allocGraph, NULL, NULL, 0);
cudaGraphInstantiate(&freeGraphExec, freeGraph, NULL, NULL, 0);
cudaGraphLaunch(allocGraphExec, allocStream);
// establish the dependency of stream2 on the allocation node
// note: the dependency could also have been established with a stream synchronize operation
cudaEventRecord(allocEvent, allocStream)
cudaStreamWaitEvent(stream2, allocEvent);
kernel<<< …, stream2 >>> (dptr, …);
// establish the dependency between the stream 3 and the allocation use
cudaStreamRecordEvent(streamUseDoneEvent, stream2);
cudaStreamWaitEvent(stream3, streamUseDoneEvent);
// it is now safe to launch the freeing graph, which may also access the memory
cudaGraphLaunch(freeGraphExec, stream3);
Ordering established by using graph external event nodes:
void *dptr;
cudaEvent_t allocEvent; // event indicating when the allocation will be ready for use.
cudaEvent_t streamUseDoneEvent; // event indicating when the stream operations are done with the allocation.
// Contents of allocating graph with event record node
cudaGraphAddMemAllocNode(&allocNode, allocGraph, NULL, 0, ¶ms);
dptr = params.dptr;
// note: this event record node depends on the alloc node
cudaGraphAddEventRecordNode(&recordNode, allocGraph, &allocNode, 1, allocEvent);
cudaGraphInstantiate(&allocGraphExec, allocGraph, NULL, NULL, 0);
// contents of consuming/freeing graph with event wait nodes
cudaGraphAddEventWaitNode(&streamUseDoneEventNode, waitAndFreeGraph, NULL, 0, streamUseDoneEvent);
cudaGraphAddEventWaitNode(&allocReadyEventNode, waitAndFreeGraph, NULL, 0, allocEvent);
nodeParams->kernelParams[0] = params.dptr;
// The allocReadyEventNode provides ordering with the alloc node for use in a consuming graph.
cudaGraphAddKernelNode(&kernelNode, waitAndFreeGraph, &allocReadyEventNode, 1, &nodeParams);
// The free node has to be ordered after both external and internal users.
// Thus the node must depend on both the kernelNode and the
// streamUseDoneEventNode.
dependencies[0] = kernelNode;
dependencies[1] = streamUseDoneEventNode;
cudaGraphAddMemFreeNode(&freeNode, waitAndFreeGraph, &dependencies, 2, dptr);
cudaGraphInstantiate(&waitAndFreeGraphExec, waitAndFreeGraph, NULL, NULL, 0);
cudaGraphLaunch(allocGraphExec, allocStream);
// establish the dependency of stream2 on the event node satisfies the ordering requirement
cudaStreamWaitEvent(stream2, allocEvent);
kernel<<< …, stream2 >>> (dptr, …);
cudaStreamRecordEvent(streamUseDoneEvent, stream2);
// the event wait node in the waitAndFreeGraphExec establishes the dependency on the “readyForFreeEvent” that is needed to prevent the kernel running in stream two from accessing the allocation after the free node in execution order.
cudaGraphLaunch(waitAndFreeGraphExec, stream3);
12.3.4. cudaGraphInstantiateFlagAutoFreeOnLaunch
Under normal circumstances, CUDA will prevent a graph from being relaunched if it has unfreed memory allocations because multiple allocations at the same address will leak memory. Instantiating a graph with the cudaGraphInstantiateFlagAutoFreeOnLaunch flag allows the graph to be relaunched while it still has unfreed allocations. In this case, the launch automatically inserts an asynchronous free of the unfreed allocations.
Auto free on launch is useful for single-producer multiple-consumer algorithms. At each iteration, a producer graph creates several allocations, and, depending on runtime conditions, a varying set of consumers accesses those allocations. This type of variable execution sequence means that consumers cannot free the allocations because a subsequent consumer may require access. Auto free on launch means that the launch loop does not need to track the producer’s allocations - instead, that information remains isolated to the producer’s creation and destruction logic. In general, auto free on launch simplifies an algorithm which would otherwise need to free all the allocations owned by a graph before each relaunch.
Note
The cudaGraphInstantiateFlagAutoFreeOnLaunch flag does not change the behavior of graph destruction. The application must explicitly free the unfreed memory in order to avoid memory leaks, even for graphs instantiated with the flag.
The following code shows the use of cudaGraphInstantiateFlagAutoFreeOnLaunch to simplify a single-producer / multiple-consumer algorithm:
// Create producer graph which allocates memory and populates it with data
cudaStreamBeginCapture(cudaStreamPerThread, cudaStreamCaptureModeGlobal);
cudaMallocAsync(&data1, blocks * threads, cudaStreamPerThread);
cudaMallocAsync(&data2, blocks * threads, cudaStreamPerThread);
produce<<<blocks, threads, 0, cudaStreamPerThread>>>(data1, data2);
...
cudaStreamEndCapture(cudaStreamPerThread, &graph);
cudaGraphInstantiateWithFlags(&producer,
graph,
cudaGraphInstantiateFlagAutoFreeOnLaunch);
cudaGraphDestroy(graph);
// Create first consumer graph by capturing an asynchronous library call
cudaStreamBeginCapture(cudaStreamPerThread, cudaStreamCaptureModeGlobal);
consumerFromLibrary(data1, cudaStreamPerThread);
cudaStreamEndCapture(cudaStreamPerThread, &graph);
cudaGraphInstantiateWithFlags(&consumer1, graph, 0); //regular instantiation
cudaGraphDestroy(graph);
// Create second consumer graph
cudaStreamBeginCapture(cudaStreamPerThread, cudaStreamCaptureModeGlobal);
consume2<<<blocks, threads, 0, cudaStreamPerThread>>>(data2);
...
cudaStreamEndCapture(cudaStreamPerThread, &graph);
cudaGraphInstantiateWithFlags(&consumer2, graph, 0);
cudaGraphDestroy(graph);
// Launch in a loop
bool launchConsumer2 = false;
do {
cudaGraphLaunch(producer, myStream);
cudaGraphLaunch(consumer1, myStream);
if (launchConsumer2) {
cudaGraphLaunch(consumer2, myStream);
}
} while (determineAction(&launchConsumer2));
cudaFreeAsync(data1, myStream);
cudaFreeAsync(data2, myStream);
cudaGraphExecDestroy(producer);
cudaGraphExecDestroy(consumer1);
cudaGraphExecDestroy(consumer2);
12.4. Optimized Memory Reuse
CUDA reuses memory in two ways:
Virtual and physical memory reuse within a graph is based on virtual address assignment, like in the stream ordered allocator.
Physical memory reuse between graphs is done with virtual aliasing: different graphs can map the same physical memory to their unique virtual addresses.
12.4.1. Address Reuse within a Graph
CUDA may reuse memory within a graph by assigning the same virtual address ranges to different allocations whose lifetimes do not overlap. Since virtual addresses may be reused, pointers to different allocations with disjoint lifetimes are not guaranteed to be unique.
The following figure shows adding a new allocation node (2) that can reuse the address freed by a dependent node (1).
Figure 29 Adding New Alloc Node 2
The following figure shows adding a new alloc node (4). The new alloc node is not dependent on the free node (2) so cannot reuse the address from the associated alloc node (2). If the alloc node (2) used the address freed by free node (1), the new alloc node 3 would need a new address.
Figure 30 Adding New Alloc Node 3
12.4.2. Physical Memory Management and Sharing
CUDA is responsible for mapping physical memory to the virtual address before the allocating node is reached in GPU order. As an optimization for memory footprint and mapping overhead, multiple graphs may use the same physical memory for distinct allocations if they will not run simultaneously; however, physical pages cannot be reused if they are bound to more than one executing graph at the same time, or to a graph allocation which remains unfreed.
CUDA may update physical memory mappings at any time during graph instantiation, launch, or execution. CUDA may also introduce synchronization between future graph launches in order to prevent live graph allocations from referring to the same physical memory. As for any allocate-free-allocate pattern, if a program accesses a pointer outside of an allocation’s lifetime, the erroneous access may silently read or write live data owned by another allocation (even if the virtual address of the allocation is unique). Use of compute sanitizer tools can catch this error.
The following figure shows graphs sequentially launched in the same stream. In this example, each graph frees all the memory it allocates. Since the graphs in the same stream never run concurrently, CUDA can and should use the same physical memory to satisfy all the allocations.
Figure 31 Sequentially Launched Graphs
12.5. Performance Considerations
When multiple graphs are launched into the same stream, CUDA attempts to allocate the same physical memory to them because the execution of these graphs cannot overlap. Physical mappings for a graph are retained between launches as an optimization to avoid the cost of remapping. If, at a later time, one of the graphs is launched such that its execution may overlap with the others (for example if it is launched into a different stream) then CUDA must perform some remapping because concurrent graphs require distinct memory to avoid data corruption.
In general, remapping of graph memory in CUDA is likely caused by these operations:
Changing the stream into which a graph is launched
A trim operation on the graph memory pool, which explicitly frees unused memory (discussed in Physical Memory Footprint)
Relaunching a graph while an unfreed allocation from another graph is mapped to the same memory will cause a remap of memory before relaunch
Remapping must happen in execution order, but after any previous execution of that graph is complete (otherwise memory that is still in use could be unmapped). Due to this ordering dependency, as well as because mapping operations are OS calls, mapping operations can be relatively expensive. Applications can avoid this cost by launching graphs containing allocation memory nodes consistently into the same stream.
12.5.1. First Launch / cudaGraphUpload
Physical memory cannot be allocated or mapped during graph instantiation because the stream in which the graph will execute is unknown. Mapping is done instead during graph launch. Calling cudaGraphUpload can separate out the cost of allocation from the launch by performing all mappings for that graph immediately and associating the graph with the upload stream. If the graph is then launched into the same stream, it will launch without any additional remapping.
Using different streams for graph upload and graph launch behaves similarly to switching streams, likely resulting in remap operations. In addition, unrelated memory pool management is permitted to pull memory from an idle stream, which could negate the impact of the uploads.
12.6. Physical Memory Footprint
The pool-management behavior of asynchronous allocation means that destroying a graph which contains memory nodes (even if their allocations are free) will not immediately return physical memory to the OS for use by other processes. To explicitly release memory back to the OS, an application should use the cudaDeviceGraphMemTrim API.
cudaDeviceGraphMemTrim will unmap and release any physical memory reserved by graph memory nodes that is not actively in use. Allocations that have not been freed and graphs that are scheduled or running are considered to be actively using the physical memory and will not be impacted. Use of the trim API will make physical memory available to other allocation APIs and other applications or processes, but will cause CUDA to reallocate and remap memory when the trimmed graphs are next launched. Note that cudaDeviceGraphMemTrim operates on a different pool from cudaMemPoolTrimTo(). The graph memory pool is not exposed to the steam ordered memory allocator. CUDA allows applications to query their graph memory footprint through the cudaDeviceGetGraphMemAttribute API. Querying the attribute cudaGraphMemAttrReservedMemCurrent returns the amount of physical memory reserved by the driver for graph allocations in the current process. Querying cudaGraphMemAttrUsedMemCurrent returns the amount of physical memory currently mapped by at least one graph. Either of these attributes can be used to track when new physical memory is acquired by CUDA for the sake of an allocating graph. Both of these attributes are useful for examining how much memory is saved by the sharing mechanism.
12.7. Peer Access
Graph allocations can be configured for access from multiple GPUs, in which case CUDA will map the allocations onto the peer GPUs as required. CUDA allows graph allocations requiring different mappings to reuse the same virtual address. When this occurs, the address range is mapped onto all GPUs required by the different allocations. This means an allocation may sometimes allow more peer access than was requested during its creation; however, relying on these extra mappings is still an error.
12.7.1. Peer Access with Graph Node APIs
The cudaGraphAddMemAllocNode API accepts mapping requests in the accessDescs array field of the node parameters structures. The poolProps.location embedded structure specifies the resident device for the allocation. Access from the allocating GPU is assumed to be needed, thus the application does not need to specify an entry for the resident device in the accessDescs array.
cudaMemAllocNodeParams params = {};
params.poolProps.allocType = cudaMemAllocationTypePinned;
params.poolProps.location.type = cudaMemLocationTypeDevice;
// specify device 1 as the resident device
params.poolProps.location.id = 1;
params.bytesize = size;
// allocate an allocation resident on device 1 accessible from device 1
cudaGraphAddMemAllocNode(&allocNode, graph, NULL, 0, ¶ms);
accessDescs[2];
// boilerplate for the access descs (only ReadWrite and Device access supported by the add node api)
accessDescs[0].flags = cudaMemAccessFlagsProtReadWrite;
accessDescs[0].location.type = cudaMemLocationTypeDevice;
accessDescs[1].flags = cudaMemAccessFlagsProtReadWrite;
accessDescs[1].location.type = cudaMemLocationTypeDevice;
// access being requested for device 0 & 2. Device 1 access requirement left implicit.
accessDescs[0].location.id = 0;
accessDescs[1].location.id = 2;
// access request array has 2 entries.
params.accessDescCount = 2;
params.accessDescs = accessDescs;
// allocate an allocation resident on device 1 accessible from devices 0, 1 and 2. (0 & 2 from the descriptors, 1 from it being the resident device).
cudaGraphAddMemAllocNode(&allocNode, graph, NULL, 0, ¶ms);
12.7.2. Peer Access with Stream Capture
For stream capture, the allocation node records the peer accessibility of the allocating pool at the time of the capture. Altering the peer accessibility of the allocating pool after a cudaMallocFromPoolAsync call is captured does not affect the mappings that the graph will make for the allocation.
// boilerplate for the access descs (only ReadWrite and Device access supported by the add node api)
accessDesc.flags = cudaMemAccessFlagsProtReadWrite;
accessDesc.location.type = cudaMemLocationTypeDevice;
accessDesc.location.id = 1;
// let memPool be resident and accessible on device 0
cudaStreamBeginCapture(stream);
cudaMallocAsync(&dptr1, size, memPool, stream);
cudaStreamEndCapture(stream, &graph1);
cudaMemPoolSetAccess(memPool, &accessDesc, 1);
cudaStreamBeginCapture(stream);
cudaMallocAsync(&dptr2, size, memPool, stream);
cudaStreamEndCapture(stream, &graph2);
//The graph node allocating dptr1 would only have the device 0 accessibility even though memPool now has device 1 accessibility.
//The graph node allocating dptr2 will have device 0 and device 1 accessibility, since that was the pool accessibility at the time of the cudaMallocAsync call.
13. Mathematical Functions
The reference manual lists, along with their description, all the functions of the C/C++ standard library mathematical functions that are supported in device code, as well as all intrinsic functions (that are only supported in device code).
This section provides accuracy information for some of these functions when applicable. It uses ULP for quantification. For further information on the definition of the Unit in the Last Place (ULP), please see Jean-Michel Muller’s paper On the definition of ulp(x), RR-5504, LIP RR-2005-09, INRIA, LIP. 2005, pp.16 at https://hal.inria.fr/inria-00070503/document.
Mathematical functions supported in device code do not set the global errno variable, nor report any floating-point exceptions to indicate errors; thus, if error diagnostic mechanisms are required, the user should implement additional screening for inputs and outputs of the functions. The user is responsible for the validity of pointer arguments. The user must not pass uninitialized parameters to the Mathematical functions as this may result in undefined behavior: functions are inlined in the user program and thus are subject to compiler optimizations.
13.1. Standard Functions
The functions from this section can be used in both host and device code.
This section specifies the error bounds of each function when executed on the device and also when executed on the host in the case where the host does not supply the function.
The error bounds are generated from extensive but not exhaustive tests, so they are not guaranteed bounds.
Single-Precision Floating-Point Functions
Addition and multiplication are IEEE-compliant, so have a maximum error of 0.5 ulp.
The recommended way to round a single-precision floating-point operand to an integer, with the result being a single-precision floating-point number is rintf(), not roundf(). The reason is that roundf() maps to a 4-instruction sequence on the device, whereas rintf() maps to a single instruction. truncf(), ceilf(), and floorf() each map to a single instruction as well.
Function |
Maximum ulp error |
|---|---|
|
0 (IEEE-754 round-to-nearest-even) |
|
0 (IEEE-754 round-to-nearest-even) |
|
0 for compute capability \(\ge 2\) when compiled with 2 (full range), otherwise |
|
0 for compute capability \(\ge 2\) when compiled with 1 (full range), otherwise |
|
|
2 (full range) Applies to |
|
0 when compiled with Otherwise 1 for compute capability \(\ge 5.2\) and 3 for older architectures |
|
1 (full range) |
|
1 (full range) |
|
3 (full range) |
|
2 (full range) |
|
3 (full range) |
|
2 (full range) |
|
3 (full range) |
|
2 (full range) |
|
An error bound cannot be provided because a fast algorithm is used with accuracy loss due to round-off. . |
|
An error bound cannot be provided because a fast algorithm is used with accuracy loss due to round-off. . |
|
2 (full range) |
|
2 (full range) |
|
2 (full range) |
|
1 (full range) |
|
1 (full range) |
|
1 (full range) |
|
2 (full range) |
|
1 (full range) |
|
2 (full range) |
|
2 (full range) |
|
4 (full range) |
|
2 (full range) |
|
1 (full range) |
|
1 (full range) |
|
1 (full range) |
|
2 (full range) |
|
2 (full range) |
|
2 (full range) |
|
3 (full range) |
|
3 (full range) |
|
2 (full range) |
|
2 (full range) |
|
3 (full range) |
|
4 (full range) |
|
3 (full range) |
|
4 (full range) |
|
2 (full range) |
|
4 (full range) |
|
2 (full range) |
|
4 (full range) |
|
4 (full range) |
|
5 (full range) |
|
5 (full range) |
|
6 (outside interval -10.001 … -2.264; larger inside) |
|
5 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
9 for |x| < 8 otherwise, the maximum absolute error is 2.2 x 10-6 |
|
9 for |x| < 8 otherwise, the maximum absolute error is 2.2 x 10-6 |
|
For n = 128, the maximum absolute error is 2.2 x 10-6 |
|
9 for |x| < 8 otherwise, the maximum absolute error is 2.2 x 10-6 |
|
9 for |x| < 8 otherwise, the maximum absolute error is 2.2 x 10-6 |
|
ceil(2 + 2.5n) for |x| < n otherwise, the maximum absolute error is 2.2 x 10-6 |
|
6 (full range) |
|
6 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
Double-Precision Floating-Point Functions
The recommended way to round a double-precision floating-point operand to an integer, with the result being a double-precision floating-point number is rint(), not round(). The reason is that round() maps to a 5-instruction sequence on the device, whereas rint() maps to a single instruction. trunc(), ceil(), and floor() each map to a single instruction as well.
Function |
Maximum ulp error |
|---|---|
|
0 (IEEE-754 round-to-nearest-even) |
|
0 (IEEE-754 round-to-nearest-even) |
|
0 (IEEE-754 round-to-nearest-even) |
|
0 (IEEE-754 round-to-nearest-even) |
|
0 (IEEE-754 round-to-nearest-even) |
|
1 (full range) |
|
1 (full range) |
|
1 (full range) |
|
2 (full range) |
|
1 (full range) |
|
2 (full range) |
|
1 (full range) |
|
2 (full range) |
|
1 (full range) |
|
An error bound cannot be provided because a fast algorithm is used with accuracy loss due to round-off. |
|
An error bound cannot be provided because a fast algorithm is used with accuracy loss due to round-off. |
|
1 (full range) |
|
1 (full range) |
|
1 (full range) |
|
1 (full range) |
|
1 (full range) |
|
1 (full range) |
|
1 (full range) |
|
1 (full range) |
|
2 (full range) |
|
2 (full range) |
|
2 (full range) |
|
2 (full range) |
|
2 (full range) |
|
2 (full range) |
|
2 (full range) |
|
2 (full range) |
|
2 (full range) |
|
2 (full range) |
|
2 (full range) |
|
2 (full range) |
|
1 (full range) |
|
1 (full range) |
|
3 (full range) |
|
3 (full range) |
|
2 (full range) |
|
2 (full range) |
|
2 (full range) |
|
5 (full range) |
|
5 (full range) |
|
6 (full range) |
|
4 (full range) |
|
5 (full range) |
|
8 (full range) |
|
4 (outside interval -23.0001 … -2.2637; larger inside) |
|
10 (full range) |
|
0 (IEEE-754 round-to-nearest-even) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
7 for |x| < 8 otherwise, the maximum absolute error is 5 x 10-12 |
|
7 for |x| < 8 otherwise, the maximum absolute error is 5 x 10-12 |
|
For n = 128, the maximum absolute error is 5 x 10-12 |
|
7 for |x| < 8 otherwise, the maximum absolute error is 5 x 10-12 |
|
7 for |x| < 8 otherwise, the maximum absolute error is 5 x 10-12 |
|
For |x| > 1.5n, the maximum absolute error is 5 x 10-12 |
|
6 (full range) |
|
6 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
|
0 (full range) |
13.2. Intrinsic Functions
The functions from this section can only be used in device code.
Among these functions are the less accurate, but faster versions of some of the functions of Standard Functions.
They have the same name prefixed with __ (such as __sinf(x)).
They are faster as they map to fewer native instructions.
The compiler has an option (-use_fast_math) that forces each function in Table 15
to compile to its intrinsic counterpart. In addition to reducing the accuracy of the affected functions,
it may also cause some differences in special case handling. A more robust approach is to selectively replace
mathematical function calls by calls to intrinsic functions only where it is merited by the performance gains
and where changed properties such as reduced accuracy and different special case handling can be tolerated.
Operator/Function |
Device Function |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single-Precision Floating-Point Functions
__fadd_[rn,rz,ru,rd]() and __fmul_[rn,rz,ru,rd]() map to addition and multiplication operations that the compiler never merges into FMADs. By contrast, additions and multiplications generated from the ‘*’ and ‘+’ operators will frequently be combined into FMADs.
Functions suffixed with _rn operate using the round to nearest even rounding mode.
Functions suffixed with _rz operate using the round towards zero rounding mode.
Functions suffixed with _ru operate using the round up (to positive infinity) rounding mode.
Functions suffixed with _rd operate using the round down (to negative infinity) rounding mode.
The accuracy of floating-point division varies depending on whether the code is compiled with -prec-div=false
or -prec-div=true. When the code is compiled with -prec-div=false, both the regular division /
operator and __fdividef(x,y) have the same accuracy, but for 2126 < |y| < 2128,
__fdividef(x,y) delivers a result of zero, whereas the / operator delivers the correct result to
within the accuracy stated in Table 16.
Also, for 2126 < |y| < 2128, if x is infinity, __fdividef(x,y) delivers
a NaN (as a result of multiplying infinity by zero), while the / operator returns infinity.
On the other hand, the / operator is IEEE-compliant when the code is compiled with -prec-div=true
or without any -prec-div option at all since its default value is true.
Function |
Error bounds |
|---|---|
|
IEEE-compliant. |
|
IEEE-compliant. |
|
IEEE-compliant. |
|
IEEE-compliant. |
|
IEEE-compliant. |
|
IEEE-compliant. |
|
IEEE-compliant. |
|
IEEE-compliant. |
|
For |
|
The maximum ulp error is |
|
The maximum ulp error is |
|
For |
|
For |
|
For |
|
For |
|
For |
|
Same as |
|
Derived from its implementation as |
|
Derived from its implementation as |
Double-Precision Floating-Point Functions
__dadd_rn() and __dmul_rn() map to addition and multiplication operations that the compiler never merges into FMADs. By contrast, additions and multiplications generated from the ‘*’ and ‘+’ operators will frequently be combined into FMADs.
Function |
Error bounds |
|---|---|
|
IEEE-compliant. |
|
IEEE-compliant. |
|
IEEE-compliant. |
|
IEEE-compliant. |
|
IEEE-compliant. Requires compute capability > 2. |
|
IEEE-compliant. Requires compute capability > 2. |
|
IEEE-compliant. Requires compute capability > 2. |
14. C++ Language Support
As described in Compilation with NVCC, CUDA source files compiled with nvcc can include a mix of host code and device code. The CUDA front-end compiler aims to emulate the host compiler behavior with respect to C++ input code. The input source code is processed according to the C++ ISO/IEC 14882:2003, C++ ISO/IEC 14882:2011, C++ ISO/IEC 14882:2014 or C++ ISO/IEC 14882:2017 specifications, and the CUDA front-end compiler aims to emulate any host compiler divergences from the ISO specification. In addition, the supported language is extended with CUDA-specific constructs described in this document 13, and is subject to the restrictions described below.
C++11 Language Features, C++14 Language Features and C++17 Language Features provide support matrices for the C++11, C++14, C++17 and C++20 features, respectively. Restrictions lists the language restrictions. Polymorphic Function Wrappers and Extended Lambdas describe additional features. Code Samples gives code samples.
14.1. C++11 Language Features
The following table lists new language features that have been accepted into the C++11 standard. The “Proposal” column provides a link to the ISO C++ committee proposal that describes the feature, while the “Available in nvcc (device code)” column indicates the first version of nvcc that contains an implementation of this feature (if it has been implemented) for device code.
Language Feature |
C++11 Proposal |
Available in nvcc (device code) |
|---|---|---|
Rvalue references |
7.0 |
|
Rvalue references for |
7.0 |
|
Initialization of class objects by rvalues |
7.0 |
|
Non-static data member initializers |
7.0 |
|
Variadic templates |
7.0 |
|
Extending variadic template template parameters |
7.0 |
|
Initializer lists |
7.0 |
|
Static assertions |
7.0 |
|
|
7.0 |
|
Multi-declarator |
7.0 |
|
Removal of auto as a storage-class specifier |
7.0 |
|
New function declarator syntax |
7.0 |
|
Lambda expressions |
7.0 |
|
Declared type of an expression |
7.0 |
|
Incomplete return types |
7.0 |
|
Right angle brackets |
7.0 |
|
Default template arguments for function templates |
7.0 |
|
Solving the SFINAE problem for expressions |
7.0 |
|
Alias templates |
7.0 |
|
Extern templates |
7.0 |
|
Null pointer constant |
7.0 |
|
Strongly-typed enums |
7.0 |
|
Forward declarations for enums |
7.0 |
|
Standardized attribute syntax |
7.0 |
|
Generalized constant expressions |
7.0 |
|
Alignment support |
7.0 |
|
Conditionally-support behavior |
7.0 |
|
Changing undefined behavior into diagnosable errors |
7.0 |
|
Delegating constructors |
7.0 |
|
Inheriting constructors |
7.0 |
|
Explicit conversion operators |
7.0 |
|
New character types |
7.0 |
|
Unicode string literals |
7.0 |
|
Raw string literals |
7.0 |
|
Universal character names in literals |
7.0 |
|
User-defined literals |
7.0 |
|
Standard Layout Types |
7.0 |
|
Defaulted functions |
7.0 |
|
Deleted functions |
7.0 |
|
Extended friend declarations |
7.0 |
|
Extending |
7.0 |
|
Inline namespaces |
7.0 |
|
Unrestricted unions |
7.0 |
|
Local and unnamed types as template arguments |
7.0 |
|
Range-based for |
7.0 |
|
Explicit virtual overrides |
7.0 |
|
Minimal support for garbage collection and reachability-based leak detection |
N/A (see Restrictions) |
|
Allowing move constructors to throw [noexcept] |
7.0 |
|
Defining move special member functions |
7.0 |
|
Concurrency |
||
Sequence points |
||
Atomic operations |
||
Strong Compare and Exchange |
||
Bidirectional Fences |
||
Memory model |
||
Data-dependency ordering: atomics and memory model |
||
Propagating exceptions |
||
Allow atomics use in signal handlers |
||
Thread-local storage |
||
Dynamic initialization and destruction with concurrency |
||
C99 Features in C++11 |
||
|
7.0 |
|
C99 preprocessor |
7.0 |
|
|
7.0 |
|
Extended integral types |
||
14.2. C++14 Language Features
The following table lists new language features that have been accepted into the C++14 standard.
Language Feature |
C++14 Proposal |
Available in nvcc (device code) |
|---|---|---|
Tweak to certain C++ contextual conversions |
9.0 |
|
Binary literals |
9.0 |
|
Functions with deduced return type |
9.0 |
|
Generalized lambda capture (init-capture) |
9.0 |
|
Generic (polymorphic) lambda expressions |
9.0 |
|
Variable templates |
9.0 |
|
Relaxing requirements on constexpr functions |
9.0 |
|
Member initializers and aggregates |
9.0 |
|
Clarifying memory allocation |
||
Sized deallocation |
||
|
9.0 |
|
Single-quotation-mark as a digit separator |
9.0 |
14.3. C++17 Language Features
All C++17 language features are supported in nvcc version 11.0 and later, subject to restrictions described here.
14.4. C++20 Language Features
All C++20 language features are supported in nvcc version 12.0 and later, subject to restrictions described here.
14.5. Restrictions
14.5.1. Host Compiler Extensions
Host compiler specific language extensions are not supported in device code.
__Complex types are only supported in host code.
__int128 type is supported in device code when compiled in conjunction with a host compiler that supports it.
__float128 type is only supported in host code on 64-bit x86 Linux platforms. A constant expression of __float128 type may be processed by the compiler in a floating point representation with lower precision.
14.5.2. Preprocessor Symbols
14.5.2.1. __CUDA_ARCH__
-
The type signature of the following entities shall not depend on whether
__CUDA_ARCH__is defined or not, or on a particular value of__CUDA_ARCH__:__global__functions and function templates__device__and__constant__variablestextures and surfaces
Example:
#if !defined(__CUDA_ARCH__) typedef int mytype; #else typedef double mytype; #endif __device__ mytype xxx; // error: xxx's type depends on __CUDA_ARCH__ __global__ void foo(mytype in, // error: foo's type depends on __CUDA_ARCH__ mytype *ptr) { *ptr = in; }
-
If a
__global__function template is instantiated and launched from the host, then the function template must be instantiated with the same template arguments irrespective of whether__CUDA_ARCH__is defined and regardless of the value of__CUDA_ARCH__.Example:
__device__ int result; template <typename T> __global__ void kern(T in) { result = in; } __host__ __device__ void foo(void) { #if !defined(__CUDA_ARCH__) kern<<<1,1>>>(1); // error: "kern<int>" instantiation only // when __CUDA_ARCH__ is undefined! #endif } int main(void) { foo(); cudaDeviceSynchronize(); return 0; }
-
In separate compilation mode, the presence or absence of a definition of a function or variable with external linkage shall not depend on whether
__CUDA_ARCH__is defined or on a particular value of__CUDA_ARCH__14.Example:
#if !defined(__CUDA_ARCH__) void foo(void) { } // error: The definition of foo() // is only present when __CUDA_ARCH__ // is undefined #endif
-
In separate compilation,
__CUDA_ARCH__must not be used in headers such that different objects could contain different behavior. Or, it must be guaranteed that all objects will compile for the same compute_arch. If a weak function or template function is defined in a header and its behavior depends on__CUDA_ARCH__, then the instances of that function in the objects could conflict if the objects are compiled for different compute arch.For example, if an a.h contains:
template<typename T> __device__ T* getptr(void) { #if __CUDA_ARCH__ == 700 return NULL; /* no address */ #else __shared__ T arr[256]; return arr; #endif }
Then if
a.cuandb.cuboth includea.hand instantiategetptrfor the same type, andb.cuexpects a non-NULL address, and compile with:nvcc –arch=compute_70 –dc a.cu nvcc –arch=compute_80 –dc b.cu nvcc –arch=sm_80 a.o b.o
At link time only one version of the
getptris used, so the behavior would depend on which version is chosen. To avoid this, eithera.cuandb.cumust be compiled for the same compute arch, or__CUDA_ARCH__should not be used in the shared header function.
The compiler does not guarantee that a diagnostic will be generated for the unsupported uses of __CUDA_ARCH__ described above.
14.5.3. Qualifiers
14.5.3.1. Device Memory Space Specifiers
The __device__, __shared__, __managed__ and __constant__ memory space specifiers are not allowed on:
class,struct, anduniondata members,formal parameters,
non-extern variable declarations within a function that executes on the host.
The __device__, __constant__ and __managed__ memory space specifiers are not allowed on variable declarations that are neither extern nor static within a function that executes on the device.
A __device__, __constant__, __managed__ or __shared__ variable definition cannot have a class type with a non-empty constructor or a non-empty destructor. A constructor for a class type is considered empty at a point in the translation unit, if it is either a trivial constructor or it satisfies all of the following conditions:
The constructor function has been defined.
The constructor function has no parameters, the initializer list is empty and the function body is an empty compound statement.
Its class has no virtual functions, no virtual base classes and no non-static data member initializers.
The default constructors of all base classes of its class can be considered empty.
For all the nonstatic data members of its class that are of class type (or array thereof), the default constructors can be considered empty.
A destructor for a class is considered empty at a point in the translation unit, if it is either a trivial destructor or it satisfies all of the following conditions:
The destructor function has been defined.
The destructor function body is an empty compound statement.
Its class has no virtual functions and no virtual base classes.
The destructors of all base classes of its class can be considered empty.
For all the nonstatic data members of its class that are of class type (or array thereof), the destructor can be considered empty.
When compiling in the whole program compilation mode (see the nvcc user manual for a description of this mode), __device__, __shared__, __managed__ and __constant__ variables cannot be defined as external using the extern keyword. The only exception is for dynamically allocated __shared__ variables as described in __shared__.
When compiling in the separate compilation mode (see the nvcc user manual for a description of this mode), __device__, __shared__, __managed__ and __constant__ variables can be defined as external using the extern keyword. nvlink will generate an error when it cannot find a definition for an external variable (unless it is a dynamically allocated __shared__ variable).
14.5.3.2. __managed__ Memory Space Specifier
Variables marked with the __managed__ memory space specifier (“managed” variables) have the following restrictions:
The address of a managed variable is not a constant expression.
A managed variable shall not have a const qualified type.
A managed variable shall not have a reference type.
-
The address or value of a managed variable shall not be used when the CUDA runtime may not be in a valid state, including the following cases:
In static/dynamic initialization or destruction of an object with static or thread local storage duration.
In code that executes after exit() has been called (for example, a function marked with gcc’s “
__attribute__((destructor))”).In code that executes when CUDA runtime may not be initialized (for example, a function marked with gcc’s “
__attribute__((constructor))”).
A managed variable cannot be used as an unparenthesized id-expression argument to a
decltype()expression.Managed variables have the same coherence and consistency behavior as specified for dynamically allocated managed memory.
When a CUDA program containing managed variables is run on an execution platform with multiple GPUs, the variables are allocated only once, and not per GPU.
A managed variable declaration without the extern linkage is not allowed within a function that executes on the host.
A managed variable declaration without the extern or static linkage is not allowed within a function that executes on the device.
Here are examples of legal and illegal uses of managed variables:
__device__ __managed__ int xxx = 10; // OK
int *ptr = &xxx; // error: use of managed variable
// (xxx) in static initialization
struct S1_t {
int field;
S1_t(void) : field(xxx) { };
};
struct S2_t {
~S2_t(void) { xxx = 10; }
};
S1_t temp1; // error: use of managed variable
// (xxx) in dynamic initialization
S2_t temp2; // error: use of managed variable
// (xxx) in the destructor of
// object with static storage
// duration
__device__ __managed__ const int yyy = 10; // error: const qualified type
__device__ __managed__ int &zzz = xxx; // error: reference type
template <int *addr> struct S3_t { };
S3_t<&xxx> temp; // error: address of managed
// variable(xxx) not a
// constant expression
__global__ void kern(int *ptr)
{
assert(ptr == &xxx); // OK
xxx = 20; // OK
}
int main(void)
{
int *ptr = &xxx; // OK
kern<<<1,1>>>(ptr);
cudaDeviceSynchronize();
xxx++; // OK
decltype(xxx) qqq; // error: managed variable(xxx) used
// as unparenthized argument to
// decltype
decltype((xxx)) zzz = yyy; // OK
}
14.5.3.3. Volatile Qualifier
Note
The volatile keyword is supported to maintain compatibility with ISO C++; however, few if any of its remaining non-deprecated uses apply to GPUs.
Reads and writes to volatile qualified objects are not atomic, and are compiled to one or more .volatile instructions which do NOT guarantee:
ordering of memory operations, or
that the number of memory operations performed by the HW matches the number of PTX instructions.
That is, CUDA C++ volatile is not suitable for:
-
Inter-Thread Synchronization: use atomic operations via cuda::atomic_ref, cuda::atomic, or Atomic Functions instead. Atomic memory operations provide inter-thread synchronization guarantees and deliver much better performance than volatile operations. CUDA C++ volatile operations do not provide any inter-thread synchronization guarantees and are therefore not correct for inter-thread synchronization. The following example shows how to pass a message across two threads using atomic operations.
__global__ void kernel(int* flag, int* data) { cuda::atomic_ref<int, cuda::thread_scope_device> f{*flag}; if (threadIdx.x == 0) { // Consumer: blocks until flag is set by producer, then reads data while(f.load(cuda::memory_order_acquire) == 0); if (*data != 42) __trap(); // Errors if wrong data read } else if (threadIdx.x == 1) { // Producer: writes data then sets flag *data = 42; f.store(1, cuda::memory_order_release); } }
__global__ void kernel(cuda::atomic<int, cuda::thread_scope_device>* flag, int* data) { if (threadIdx.x == 0) { // Consumer: blocks until flag is set by producer, then reads data while(flag->load(cuda::memory_order_acquire) == 0); if (*data != 42) __trap(); // Errors if wrong data read } else if (threadIdx.x == 1) { // Producer: writes data then sets flag *data = 42; flag->store(1, cuda::memory_order_release); } }
__global__ void kernel(int* flag, int* data) { if (threadIdx.x == 0) { // Consumer: blocks until flag is set by producer, then reads data while(atomicAdd(flag, 0) == 0); // Load with Relaxed Read-Modify-Write __threadfence(); // SequentiallyConsistent fence if (*data != 42) __trap(); // Errors if wrong data read } else if (threadIdx.x == 1) { // Producer: writes data then sets flag *data = 42; __threadfence(); // SequentiallyConsistent fence atomicExch(flag, 1); // Store with Relaxed Read-Modify-Write } }
-
Memory Mapped IO (MMIO): use PTX MMIO operations via inline PTX instead. PTX MMIO operations strictly preserve the number of memory accesses performed. CUDA C++
volatileoperations do not preserve the number of memory accesses performed, and may perform more or less accesses than requested in a non-deterministic way, making them incorrect for MMIO. The following example shows how to read and write from a register using PTX mmio operations.__global__ void kernel(int* mmio_reg0, int* mmio_reg1) { // Write to MMIO register: int value = 13; asm volatile("st.relaxed.mmio.sys.u32 [%0], %1;" :: "l"(mmio_reg0), "r"(value) : "memory"); // Read MMIO register: asm volatile("ld.relaxed.mmio.sys.u32 %0, [%1];" : "=r"(value) : "l"(mmio_reg1) : "memory"); if (value != 42) __trap(); // Errors if wrong data read }
14.5.4. Pointers
Dereferencing a pointer either to global or shared memory in code that is executed on the host, or to host memory in code that is executed on the device results in an undefined behavior, most often in a segmentation fault and application termination.
The address obtained by taking the address of a __device__, __shared__ or __constant__ variable can only be used in device code. The address of a __device__ or __constant__ variable obtained through cudaGetSymbolAddress() as described in Device Memory can only be used in host code.
14.5.5. Operators
14.5.5.1. Assignment Operator
__constant__ variables can only be assigned from the host code through runtime functions (Device Memory); they cannot be assigned from the device code.
__shared__ variables cannot have an initialization as part of their declaration.
It is not allowed to assign values to any of the built-in variables defined in Built-in Variables.
14.5.5.2. Address Operator
It is not allowed to take the address of any of the built-in variables defined in Built-in Variables.
14.5.6. Run Time Type Information (RTTI)
The following RTTI-related features are supported in host code, but not in device code.
typeidoperatorstd::type_infodynamic_castoperator
14.5.7. Exception Handling
Exception handling is only supported in host code, but not in device code.
Exception specification is not supported for __global__ functions.
14.5.8. Standard Library
Standard libraries are only supported in host code, but not in device code, unless specified otherwise.
14.5.9. Namespace Reservations
Unless an exception is otherwise noted, it is undefined behavior to add any declarations or definitions to cuda::, nv::, cooperative_groups:: or any namespace nested within.
Examples:
namespace cuda{
// Bad: class declaration added to namespace cuda
struct foo{};
// Bad: function definition added to namespace cuda
cudaStream_t make_stream(){
cudaStream_t s;
cudaStreamCreate(&s);
return s;
}
} // namespace cuda
namespace cuda{
namespace utils{
// Bad: function definition added to namespace nested within cuda
cudaStream_t make_stream(){
cudaStream_t s;
cudaStreamCreate(&s);
return s;
}
} // namespace utils
} // namespace cuda
namespace utils{
namespace cuda{
// Okay: namespace cuda may be used nested within a non-reserved namespace
cudaStream_t make_stream(){
cudaStream_t s;
cudaStreamCreate(&s);
return s;
}
} // namespace cuda
} // namespace utils
// Bad: Equivalent to adding symbols to namespace cuda at global scope
using namespace utils;
14.5.10. Functions
14.5.10.1. External Linkage
A call within some device code of a function declared with the extern qualifier is only allowed if the function is defined within the same compilation unit as the device code, i.e., a single file or several files linked together with relocatable device code and nvlink.
14.5.10.2. Implicitly-declared and explicitly-defaulted functions
Let F denote a function that is either implicitly-declared or is explicitly-defaulted on its first declaration The execution space specifiers (__host__, __device__) for F are the union of the execution space specifiers of all the functions that invoke it (note that a __global__ caller will be treated as a __device__ caller for this analysis). For example:
class Base {
int x;
public:
__host__ __device__ Base(void) : x(10) {}
};
class Derived : public Base {
int y;
};
class Other: public Base {
int z;
};
__device__ void foo(void)
{
Derived D1;
Other D2;
}
__host__ void bar(void)
{
Other D3;
}
Here, the implicitly-declared constructor function “Derived::Derived” will be treated as a __device__ function, since it is invoked only from the __device__ function “foo”. The implicitly-declared constructor function “Other::Other” will be treated as a __host__ __device__ function, since it is invoked both from a __device__ function “foo” and a __host__ function “bar”.
In addition, if F is a virtual destructor, then the execution spaces of each virtual destructor D overridden by F are added to the set of execution spaces for F, if D is either not implicitly defined or is explicitly defaulted on a declaration other than its first declaration.
For example:
struct Base1 { virtual __host__ __device__ ~Base1() { } };
struct Derived1 : Base1 { }; // implicitly-declared virtual destructor
// ~Derived1 has __host__ __device__
// execution space specifiers
struct Base2 { virtual __device__ ~Base2(); };
__device__ Base2::~Base2() = default;
struct Derived2 : Base2 { }; // implicitly-declared virtual destructor
// ~Derived2 has __device__ execution
// space specifiers
14.5.10.3. Function Parameters
__global__ function parameters are passed to the device via constant memory and are limited to 32,764 bytes starting with Volta, and 4 KB on older architectures.
__global__ functions cannot have a variable number of arguments.
__global__ function parameters cannot be pass-by-reference.
In separate compilation mode, if a __device__ or __global__ function is ODR-used in a particular translation unit, then the parameter and return types of the function must be complete in that translation unit.
Example:
//first.cu:
struct S;
__device__ void foo(S); // error: type 'S' is incomplete
__device__ auto *ptr = foo;
int main() { }
//second.cu:
struct S { int x; };
__device__ void foo(S) { }
//compiler invocation
$nvcc -std=c++14 -rdc=true first.cu second.cu -o first
nvlink error : Prototype doesn't match for '_Z3foo1S' in '/tmp/tmpxft_00005c8c_00000000-18_second.o', first defined in '/tmp/tmpxft_00005c8c_00000000-18_second.o'
nvlink fatal : merge_elf failed
14.5.10.3.1. __global__ Function Argument Processing
When a __global__ function is launched from device code, each argument must be trivially copyable and trivially destructible.
When a __global__ function is launched from host code, each argument type is allowed to be non-trivially copyable or non-trivially-destructible, but the processing for such types does not follow the standard C++ model, as described below. User code must ensure that this workflow does not affect program correctness. The workflow diverges from standard C++ in two areas:
-
Memcpy instead of copy constructor invocation
When lowering a
__global__function launch from host code, the compiler generates stub functions that copy the parameters one or more times by value, before eventually usingmemcpyto copy the arguments to the__global__function’s parameter memory on the device. This occurs even if an argument was non-trivially-copyable, and therefore may break programs where the copy constructor has side effects.Example:
#include <cassert> struct S { int x; int *ptr; __host__ __device__ S() { } __host__ __device__ S(const S &) { ptr = &x; } }; __global__ void foo(S in) { // this assert may fail, because the compiler // generated code will memcpy the contents of "in" // from host to kernel parameter memory, so the // "in.ptr" is not initialized to "&in.x" because // the copy constructor is skipped. assert(in.ptr == &in.x); } int main() { S tmp; foo<<<1,1>>>(tmp); cudaDeviceSynchronize(); }
Example:
#include <cassert> __managed__ int counter; struct S1 { S1() { } S1(const S1 &) { ++counter; } }; __global__ void foo(S1) { /* this assertion may fail, because the compiler generates stub functions on the host for a kernel launch, and they may copy the argument by value more than once. */ assert(counter == 1); } int main() { S1 V; foo<<<1,1>>>(V); cudaDeviceSynchronize(); }
-
Destructor may be invoked before the ``__global__`` function has finished
Kernel launches are asynchronous with host execution. As a result, if a
__global__function argument has a non-trivial destructor, the destructor may execute in host code even before the__global__function has finished execution. This may break programs where the destructor has side effects.Example:
struct S { int *ptr; S() : ptr(nullptr) { } S(const S &) { cudaMallocManaged(&ptr, sizeof(int)); } ~S() { cudaFree(ptr); } }; __global__ void foo(S in) { //error: This store may write to memory that has already been // freed (see below). *(in.ptr) = 4; } int main() { S V; /* The object 'V' is first copied by value to a compiler-generated * stub function that does the kernel launch, and the stub function * bitwise copies the contents of the argument to kernel parameter * memory. * However, GPU kernel execution is asynchronous with host * execution. * As a result, S::~S() will execute when the stub function returns, releasing allocated memory, even though the kernel may not have finished execution. */ foo<<<1,1>>>(V); cudaDeviceSynchronize(); }
14.5.10.3.2. Toolkit and Driver Compatibility
Developers must use the 12.1 Toolkit and r530 driver or higher to compile, launch, and debug kernels that accept parameters larger than 4KB. If such kernels are launched on older drivers, CUDA will issue the error CUDA_ERROR_NOT_SUPPORTED.
14.5.10.3.3. Link Compatibility across Toolkit Revisions
When linking device objects, if at least one device object contains a kernel with a parameter larger than 4KB, the developer must recompile all objects from their respective device sources with the 12.1 toolkit or higher before linking them together. Failure to do so will result in a linker error.
14.5.10.4. Static Variables within Function
Variable memory space specifiers are allowed in the declaration of a static variable V within the immediate or nested block scope of a function F where:
Fis a__global__or__device__-only function.Fis a__host__ __device__function and__CUDA_ARCH__is defined 17.
If no explicit memory space specifier is present in the declaration of V, an implicit __device__ specifier is assumed during device compilation.
V has the same initialization restrictions as a variable with the same memory space specifiers declared in namespace scope for example a __device__ variable cannot have a ‘non-empty’ constructor (see Device Memory Space Specifiers).
Examples of legal and illegal uses of function-scope static variables are shown below.
struct S1_t {
int x;
};
struct S2_t {
int x;
__device__ S2_t(void) { x = 10; }
};
struct S3_t {
int x;
__device__ S3_t(int p) : x(p) { }
};
__device__ void f1() {
static int i1; // OK, implicit __device__ memory space specifier
static int i2 = 11; // OK, implicit __device__ memory space specifier
static __managed__ int m1; // OK
static __device__ int d1; // OK
static __constant__ int c1; // OK
static S1_t i3; // OK, implicit __device__ memory space specifier
static S1_t i4 = {22}; // OK, implicit __device__ memory space specifier
static __shared__ int i5; // OK
int x = 33;
static int i6 = x; // error: dynamic initialization is not allowed
static S1_t i7 = {x}; // error: dynamic initialization is not allowed
static S2_t i8; // error: dynamic initialization is not allowed
static S3_t i9(44); // error: dynamic initialization is not allowed
}
__host__ __device__ void f2() {
static int i1; // OK, implicit __device__ memory space specifier
// during device compilation.
#ifdef __CUDA_ARCH__
static __device__ int d1; // OK, declaration is only visible during device
// compilation (__CUDA_ARCH__ is defined)
#else
static int d0; // OK, declaration is only visible during host
// compilation (__CUDA_ARCH__ is not defined)
#endif
static __device__ int d2; // error: __device__ variable inside
// a host function during host compilation
// i.e. when __CUDA_ARCH__ is not defined
static __shared__ int i2; // error: __shared__ variable inside
// a host function during host compilation
// i.e. when __CUDA_ARCH__ is not defined
}
14.5.10.5. Function Pointers
The address of a __global__ function taken in host code cannot be used in device code (e.g. to launch the kernel). Similarly, the address of a __global__ function taken in device code cannot be used in host code.
It is not allowed to take the address of a __device__ function in host code.
14.5.10.6. Function Recursion
__global__ functions do not support recursion.
14.5.10.7. Friend Functions
A __global__ function or function template cannot be defined in a friend declaration.
Example:
struct S1_t {
friend __global__
void foo1(void); // OK: not a definition
template<typename T>
friend __global__
void foo2(void); // OK: not a definition
friend __global__
void foo3(void) { } // error: definition in friend declaration
template<typename T>
friend __global__
void foo4(void) { } // error: definition in friend declaration
};
14.5.10.8. Operator Function
An operator function cannot be a __global__ function.
14.5.10.9. Allocation and Deallocation Functions
A user-defined operator new, operator new[], operator delete, or operator delete[] cannot be used to replace the corresponding __host__ or __device__ builtins provided by the compiler.
14.5.11. Classes
14.5.11.1. Data Members
Static data members are not supported except for those that are also const-qualified (see Const-qualified variables).
14.5.11.2. Function Members
Static member functions cannot be __global__ functions.
14.5.11.3. Virtual Functions
When a function in a derived class overrides a virtual function in a base class, the execution space specifiers (i.e., __host__, __device__) on the overridden and overriding functions must match.
It is not allowed to pass as an argument to a __global__ function an object of a class with virtual functions.
If an object is created in host code, invoking a virtual function for that object in device code has undefined behavior.
If an object is created in device code, invoking a virtual function for that object in host code has undefined behavior.
See Windows-Specific for additional constraints when using the Microsoft host compiler.
Example:
struct S1 { virtual __host__ __device__ void foo() { } };
__managed__ S1 *ptr1, *ptr2;
__managed__ __align__(16) char buf1[128];
__global__ void kern() {
ptr1->foo(); // error: virtual function call on a object
// created in host code.
ptr2 = new(buf1) S1();
}
int main(void) {
void *buf;
cudaMallocManaged(&buf, sizeof(S1), cudaMemAttachGlobal);
ptr1 = new (buf) S1();
kern<<<1,1>>>();
cudaDeviceSynchronize();
ptr2->foo(); // error: virtual function call on an object
// created in device code.
}
14.5.11.4. Virtual Base Classes
It is not allowed to pass as an argument to a __global__ function an object of a class derived from virtual base classes.
See Windows-Specific for additional constraints when using the Microsoft host compiler.
14.5.11.5. Anonymous Unions
Member variables of a namespace scope anonymous union cannot be referenced in a __global__ or __device__ function.
14.5.11.6. Windows-Specific
The CUDA compiler follows the IA64 ABI for class layout, while the Microsoft host compiler does not. Let T denote a pointer to member type, or a class type that satisfies any of the following conditions:
Thas virtual functions.Thas a virtual base class.Thas multiple inheritance with more than one direct or indirect empty base class.All direct and indirect base classes
BofTare empty and the type of the first fieldFofTusesBin its definition, such thatBis laid out at offset 0 in the definition ofF.
Let C denote T or a class type that has T as a field type or as a base class type. The CUDA compiler may compute the class layout and size differently than the Microsoft host compiler for the type C.
As long as the type C is used exclusively in host or device code, the program should work correctly.
Passing an object of type C between host and device code has undefined behavior, for example, as an argument to a __global__ function or through cudaMemcpy*() calls.
Accessing an object of type C or any subobject in device code, or invoking a member function in device code, has undefined behavior if the object is created in host code.
Accessing an object of type C or any subobject in host code, or invoking a member function in host code, has undefined behavior if the object is created in device code 18.
14.5.12. Templates
A type or template cannot be used in the type, non-type or template template argument of a __global__ function template instantiation or a __device__/__constant__ variable instantiation if either:
The type or template is defined within a
__host__or__host__ __device__.The type or template is a class member with
privateorprotectedaccess and its parent class is not defined within a__device__or__global__function.The type is unnamed.
The type is compounded from any of the types above.
Example:
template <typename T>
__global__ void myKernel(void) { }
class myClass {
private:
struct inner_t { };
public:
static void launch(void)
{
// error: inner_t is used in template argument
// but it is private
myKernel<inner_t><<<1,1>>>();
}
};
// C++14 only
template <typename T> __device__ T d1;
template <typename T1, typename T2> __device__ T1 d2;
void fn() {
struct S1_t { };
// error (C++14 only): S1_t is local to the function fn
d1<S1_t> = {};
auto lam1 = [] { };
// error (C++14 only): a closure type cannot be used for
// instantiating a variable template
d2<int, decltype(lam1)> = 10;
}
14.5.13. Trigraphs and Digraphs
Trigraphs are not supported on any platform. Digraphs are not supported on Windows.
14.5.14. Const-qualified variables
Let ‘V’ denote a namespace scope variable or a class static member variable that has const qualified type and does not have execution space annotations (for example, __device__, __constant__, __shared__). V is considered to be a host code variable.
The value of V may be directly used in device code, if
V has been initialized with a constant expression before the point of use,
the type of V is not volatile-qualified, and
-
it has one of the following types:
built-in floating point type except when the Microsoft compiler is used as the host compiler,
built-in integral type.
Device source code cannot contain a reference to V or take the address of V.
Example:
const int xxx = 10;
struct S1_t { static const int yyy = 20; };
extern const int zzz;
const float www = 5.0;
__device__ void foo(void) {
int local1[xxx]; // OK
int local2[S1_t::yyy]; // OK
int val1 = xxx; // OK
int val2 = S1_t::yyy; // OK
int val3 = zzz; // error: zzz not initialized with constant
// expression at the point of use.
const int &val3 = xxx; // error: reference to host variable
const int *val4 = &xxx; // error: address of host variable
const float val5 = www; // OK except when the Microsoft compiler is used as
// the host compiler.
}
const int zzz = 20;
14.5.15. Long Double
The use of long double type is not supported in device code.
14.5.16. Deprecation Annotation
nvcc supports the use of deprecated attribute when using gcc, clang, xlC, icc or pgcc host compilers, and the use of deprecated declspec when using the cl.exe host compiler. It also supports the [[deprecated]] standard attribute when the C++14 dialect has been enabled. The CUDA frontend compiler will generate a deprecation diagnostic for a reference to a deprecated entity from within the body of a __device__, __global__ or __host__ __device__ function when __CUDA_ARCH__ is defined (i.e., during device compilation phase). Other references to deprecated entities will be handled by the host compiler, e.g., a reference from within a __host__ function.
The CUDA frontend compiler does not support the #pragma gcc diagnostic or #pragma warning mechanisms supported by various host compilers. Therefore, deprecation diagnostics generated by the CUDA frontend compiler are not affected by these pragmas, but diagnostics generated by the host compiler will be affected. To suppress the warning for device-code, user can use NVIDIA specific pragma #pragma nv_diag_suppress. The nvcc flag -Wno-deprecated-declarations can be used to suppress all deprecation warnings, and the flag -Werror=deprecated-declarations can be used to turn deprecation warnings into errors.
14.5.17. Noreturn Annotation
nvcc supports the use of noreturn attribute when using gcc, clang, xlC, icc or pgcc host compilers, and the use of noreturn declspec when using the cl.exe host compiler. It also supports the [[noreturn]] standard attribute when the C++11 dialect has been enabled.
The attribute/declspec can be used in both host and device code.
14.5.18. [[likely]] / [[unlikely]] Standard Attributes
These attributes are accepted in all configurations that support the C++ standard attribute syntax. The attributes can be used to hint to the device compiler optimizer whether a statement is more or less likely to be executed compared to any alternative path that does not include the statement.
Example:
__device__ int foo(int x) {
if (i < 10) [[likely]] { // the 'if' block will likely be entered
return 4;
}
if (i < 20) [[unlikely]] { // the 'if' block will not likely be entered
return 1;
}
return 0;
}
If these attributes are used in host code when __CUDA_ARCH__ is undefined, then they will be present in the code parsed by the host compiler, which may generate a warning if the attributes are not supported. For example, clang11 host compiler will generate an ‘unknown attribute’ warning.
14.5.19. const and pure GNU Attributes
These attributes are supported for both host and device functions, when using a language dialect and host compiler that also supports these attributes e.g. with g++ host compiler.
For a device function annotated with the pure attribute, the device code optimizer assumes that the function does not change any mutable state visible to caller functions (e.g. memory).
For a device function annotated with the const attribute, the device code optimizer assumes that the function does not access or change any mutable state visible to caller functions (e.g. memory).
Example:
__attribute__((const)) __device__ int get(int in);
__device__ int doit(int in) {
int sum = 0;
//because 'get' is marked with 'const' attribute
//device code optimizer can recognize that the
//second call to get() can be commoned out.
sum = get(in);
sum += get(in);
return sum;
}
14.5.20. __nv_pure__ Attribute
The __nv_pure__ attributed is supported for both host and device functions. For host functions, when using a language dialect that supports the pure GNU attribute, the __nv_pure__ attribute is translated to the pure GNU attribute. Similarly when using MSVC as the host compiler, the attribute is translated to the MSVC noalias attribute.
When a device function is annotated with the __nv_pure__ attribute, the device code optimizer assumes that the function does not change any mutable state visible to caller functions (e.g. memory).
14.5.21. Intel Host Compiler Specific
The CUDA frontend compiler parser does not recognize some of the intrinsic functions supported by the Intel compiler (e.g. icc). When using the Intel compiler as a host compiler, nvcc will therefore enable the macro __INTEL_COMPILER_USE_INTRINSIC_PROTOTYPES during preprocessing. This macro enables explicit declarations of the Intel compiler intrinsic functions in the associated header files, allowing nvcc to support use of such functions in host code19.
14.5.22. C++11 Features
C++11 features that are enabled by default by the host compiler are also supported by nvcc, subject to the restrictions described in this document. In addition, invoking nvcc with -std=c++11 flag turns on all C++11 features and also invokes the host preprocessor, compiler and linker with the corresponding C++11 dialect option 20.
14.5.22.1. Lambda Expressions
The execution space specifiers for all member functions21 of the closure class associated with a lambda expression are derived by the compiler as follows. As described in the C++11 standard, the compiler creates a closure type in the smallest block scope, class scope or namespace scope that contains the lambda expression. The innermost function scope enclosing the closure type is computed, and the corresponding function’s execution space specifiers are assigned to the closure class member functions. If there is no enclosing function scope, the execution space specifier is __host__.
Examples of lambda expressions and computed execution space specifiers are shown below (in comments).
auto globalVar = [] { return 0; }; // __host__
void f1(void) {
auto l1 = [] { return 1; }; // __host__
}
__device__ void f2(void) {
auto l2 = [] { return 2; }; // __device__
}
__host__ __device__ void f3(void) {
auto l3 = [] { return 3; }; // __host__ __device__
}
__device__ void f4(int (*fp)() = [] { return 4; } /* __host__ */) {
}
__global__ void f5(void) {
auto l5 = [] { return 5; }; // __device__
}
__device__ void f6(void) {
struct S1_t {
static void helper(int (*fp)() = [] {return 6; } /* __device__ */) {
}
};
}
The closure type of a lambda expression cannot be used in the type or non-type argument of a __global__ function template instantiation, unless the lambda is defined within a __device__ or __global__ function.
Example:
template <typename T>
__global__ void foo(T in) { };
template <typename T>
struct S1_t { };
void bar(void) {
auto temp1 = [] { };
foo<<<1,1>>>(temp1); // error: lambda closure type used in
// template type argument
foo<<<1,1>>>( S1_t<decltype(temp1)>()); // error: lambda closure type used in
// template type argument
}
14.5.22.2. std::initializer_list
By default, the CUDA compiler will implicitly consider the member functions of std::initializer_list to have __host__ __device__ execution space specifiers, and therefore they can be invoked directly from device code. The nvcc flag --no-host-device-initializer-list will disable this behavior; member functions of std::initializer_list will then be considered as __host__ functions and will not be directly invokable from device code.
Example:
#include <initializer_list>
__device__ int foo(std::initializer_list<int> in);
__device__ void bar(void)
{
foo({4,5,6}); // (a) initializer list containing only
// constant expressions.
int i = 4;
foo({i,5,6}); // (b) initializer list with at least one
// non-constant element.
// This form may have better performance than (a).
}
14.5.22.3. Rvalue references
By default, the CUDA compiler will implicitly consider std::move and std::forward function templates to have __host__ __device__ execution space specifiers, and therefore they can be invoked directly from device code. The nvcc flag --no-host-device-move-forward will disable this behavior; std::move and std::forward will then be considered as __host__ functions and will not be directly invokable from device code.
14.5.22.4. Constexpr functions and function templates
By default, a constexpr function cannot be called from a function with incompatible execution space 22. The experimental nvcc flag --expt-relaxed-constexpr removes this restriction 23. When this flag is specified, host code can invoke a __device__ constexpr function and device code can invoke a __host__ constexpr function. nvcc will define the macro __CUDACC_RELAXED_CONSTEXPR__ when --expt-relaxed-constexpr has been specified. Note that a function template instantiation may not be a constexpr function even if the corresponding template is marked with the keyword constexpr (C++11 Standard Section [dcl.constexpr.p6]).
14.5.22.5. Constexpr variables
Let ‘V’ denote a namespace scope variable or a class static member variable that has been marked constexpr and that does not have execution space annotations (e.g., __device__, __constant__, __shared__). V is considered to be a host code variable.
If V is of scalar type 24 other than long double and the type is not volatile-qualified, the value of V can be directly used in device code. In addition, if V is of a non-scalar type then scalar elements of V can be used inside a constexpr __device__ or __host__ __device__ function, if the call to the function is a constant expression 25. Device source code cannot contain a reference to V or take the address of V.
Example:
constexpr int xxx = 10;
constexpr int yyy = xxx + 4;
struct S1_t { static constexpr int qqq = 100; };
constexpr int host_arr[] = { 1, 2, 3};
constexpr __device__ int get(int idx) { return host_arr[idx]; }
__device__ int foo(int idx) {
int v1 = xxx + yyy + S1_t::qqq; // OK
const int &v2 = xxx; // error: reference to host constexpr
// variable
const int *v3 = &xxx; // error: address of host constexpr
// variable
const int &v4 = S1_t::qqq; // error: reference to host constexpr
// variable
const int *v5 = &S1_t::qqq; // error: address of host constexpr
// variable
v1 += get(2); // OK: 'get(2)' is a constant
// expression.
v1 += get(idx); // error: 'get(idx)' is not a constant
// expression
v1 += host_arr[2]; // error: 'host_arr' does not have
// scalar type.
return v1;
}
14.5.22.6. Inline namespaces
For an input CUDA translation unit, the CUDA compiler may invoke the host compiler for compiling the host code within the translation unit. In the code passed to the host compiler, the CUDA compiler will inject additional compiler generated code, if the input CUDA translation unit contained a definition of any of the following entities:
__global__function or function template instantiation__device__,__constant__variables with surface or texture type
The compiler generated code contains a reference to the defined entity. If the entity is defined within an inline namespace and another entity of the same name and type signature is defined in an enclosing namespace, this reference may be considered ambiguous by the host compiler and host compilation will fail.
This limitation can be avoided by using unique names for such entities defined within an inline namespace.
Example:
__device__ int Gvar;
inline namespace N1 {
__device__ int Gvar;
}
// <-- CUDA compiler inserts a reference to "Gvar" at this point in the
// translation unit. This reference will be considered ambiguous by the
// host compiler and compilation will fail.
Example:
inline namespace N1 {
namespace N2 {
__device__ int Gvar;
}
}
namespace N2 {
__device__ int Gvar;
}
// <-- CUDA compiler inserts reference to "::N2::Gvar" at this point in
// the translation unit. This reference will be considered ambiguous by
// the host compiler and compilation will fail.
14.5.22.6.1. Inline unnamed namespaces
The following entities cannot be declared in namespace scope within an inline unnamed namespace:
__managed__,__device__,__shared__and__constant__variables__global__function and function templatesvariables with surface or texture type
Example:
inline namespace {
namespace N2 {
template <typename T>
__global__ void foo(void); // error
__global__ void bar(void) { } // error
template <>
__global__ void foo<int>(void) { } // error
__device__ int x1b; // error
__constant__ int x2b; // error
__shared__ int x3b; // error
texture<int> q2; // error
surface<int> s2; // error
}
};
14.5.22.7. thread_local
The thread_local storage specifier is not allowed in device code.
14.5.22.8. __global__ functions and function templates
If the closure type associated with a lambda expression is used in a template argument of a __global__ function template instantiation, the lambda expression must either be defined in the immediate or nested block scope of a __device__ or __global__ function, or must be an extended lambda.
Example:
template <typename T>
__global__ void kernel(T in) { }
__device__ void foo_device(void)
{
// All kernel instantiations in this function
// are valid, since the lambdas are defined inside
// a __device__ function.
kernel<<<1,1>>>( [] __device__ { } );
kernel<<<1,1>>>( [] __host__ __device__ { } );
kernel<<<1,1>>>( [] { } );
}
auto lam1 = [] { };
auto lam2 = [] __host__ __device__ { };
void foo_host(void)
{
// OK: instantiated with closure type of an extended __device__ lambda
kernel<<<1,1>>>( [] __device__ { } );
// OK: instantiated with closure type of an extended __host__ __device__
// lambda
kernel<<<1,1>>>( [] __host__ __device__ { } );
// error: unsupported: instantiated with closure type of a lambda
// that is not an extended lambda
kernel<<<1,1>>>( [] { } );
// error: unsupported: instantiated with closure type of a lambda
// that is not an extended lambda
kernel<<<1,1>>>( lam1);
// error: unsupported: instantiated with closure type of a lambda
// that is not an extended lambda
kernel<<<1,1>>>( lam2);
}
A __global__ function or function template cannot be declared as constexpr.
A __global__ function or function template cannot have a parameter of type std::initializer_list or va_list.
A __global__ function cannot have a parameter of rvalue reference type.
A variadic __global__ function template has the following restrictions:
Only a single pack parameter is allowed.
The pack parameter must be listed last in the template parameter list.
Example:
// ok
template <template <typename...> class Wrapper, typename... Pack>
__global__ void foo1(Wrapper<Pack...>);
// error: pack parameter is not last in parameter list
template <typename... Pack, template <typename...> class Wrapper>
__global__ void foo2(Wrapper<Pack...>);
// error: multiple parameter packs
template <typename... Pack1, int...Pack2, template<typename...> class Wrapper1,
template<int...> class Wrapper2>
__global__ void foo3(Wrapper1<Pack1...>, Wrapper2<Pack2...>);
14.5.22.10. Defaulted functions
Execution space specifiers on a function that is explicitly-defaulted on its first declaration are ignored by the CUDA compiler. Instead, the CUDA compiler will infer the execution space specifiers as described in Implicitly-declared and explicitly-defaulted functions.
Execution space specifiers are not ignored if the function is explicitly-defaulted, but not on its first declaration.
Example:
struct S1 {
// warning: __host__ annotation is ignored on a function that
// is explicitly-defaulted on its first declaration
__host__ S1() = default;
};
__device__ void foo1() {
//note: __device__ execution space is derived for S1::S1
// based on implicit call from within __device__ function
// foo1
S1 s1;
}
struct S2 {
__host__ S2();
};
//note: S2::S2 is not defaulted on its first declaration, and
// its execution space is fixed to __host__ based on its
// first declaration.
S2::S2() = default;
__device__ void foo2() {
// error: call from __device__ function 'foo2' to
// __host__ function 'S2::S2'
S2 s2;
}
14.5.23. C++14 Features
C++14 features enabled by default by the host compiler are also supported by nvcc. Passing nvcc -std=c++14 flag turns on all C++14 features and also invokes the host preprocessor, compiler and linker with the corresponding C++14 dialect option 26. This section describes the restrictions on the supported C++14 features.
14.5.23.1. Functions with deduced return type
A __global__ function cannot have a deduced return type.
If a __device__ function has deduced return type, the CUDA frontend compiler will change the function declaration to have a void return type, before invoking the host compiler. This may cause issues for introspecting the deduced return type of the __device__ function in host code. Thus, the CUDA compiler will issue compile-time errors for referencing such deduced return type outside device function bodies, except if the reference is absent when __CUDA_ARCH__ is undefined.
Examples:
__device__ auto fn1(int x) {
return x;
}
__device__ decltype(auto) fn2(int x) {
return x;
}
__device__ void device_fn1() {
// OK
int (*p1)(int) = fn1;
}
// error: referenced outside device function bodies
decltype(fn1(10)) g1;
void host_fn1() {
// error: referenced outside device function bodies
int (*p1)(int) = fn1;
struct S_local_t {
// error: referenced outside device function bodies
decltype(fn2(10)) m1;
S_local_t() : m1(10) { }
};
}
// error: referenced outside device function bodies
template <typename T = decltype(fn2)>
void host_fn2() { }
template<typename T> struct S1_t { };
// error: referenced outside device function bodies
struct S1_derived_t : S1_t<decltype(fn1)> { };
14.5.23.2. Variable templates
A __device__/__constant__ variable template cannot have a const qualified type when using the Microsoft host compiler.
Examples:
// error: a __device__ variable template cannot
// have a const qualified type on Windows
template <typename T>
__device__ const T d1(2);
int *const x = nullptr;
// error: a __device__ variable template cannot
// have a const qualified type on Windows
template <typename T>
__device__ T *const d2(x);
// OK
template <typename T>
__device__ const T *d3;
__device__ void fn() {
int t1 = d1<int>;
int *const t2 = d2<int>;
const int *t3 = d3<int>;
}
14.5.24. C++17 Features
C++17 features enabled by default by the host compiler are also supported by nvcc. Passing nvcc -std=c++17 flag turns on all C++17 features and also invokes the host preprocessor, compiler and linker with the corresponding C++17 dialect option 27. This section describes the restrictions on the supported C++17 features.
14.5.24.1. Inline Variable
-
A namespace scope inline variable declared with
__device__or__constant__or__managed__memory space specifier must have internal linkage, if the code is compiled with nvcc in whole program compilation mode.Examples:
inline __device__ int xxx; //error when compiled with nvcc in //whole program compilation mode. //ok when compiled with nvcc in //separate compilation mode. inline __shared__ int yyy0; // ok. static inline __device__ int yyy; // ok: internal linkage namespace { inline __device__ int zzz; // ok: internal linkage }
When using g++ host compiler, an inline variable declared with
__managed__memory space specifier may not be visible to the debugger.
14.5.24.2. Structured Binding
A structured binding cannot be declared with a variable memory space specifier.
Example:
struct S { int x; int y; };
__device__ auto [a1, b1] = S{4,5}; // error
14.5.25. C++20 Features
C++20 features enabled by default by the host compiler are also supported by nvcc. Passing nvcc -std=c++20 flag turns on all C++20 features and also invokes the host preprocessor, compiler and linker with the corresponding C++20 dialect option 28. This section describes the restrictions on the supported C++20 features.
14.5.25.1. Module support
Modules are not supported in CUDA C++, in either host or device code. Uses of the module, export and import keywords are diagnosed as errors.
14.5.25.2. Coroutine support
Coroutines are not supported in device code. Uses of the co_await, co_yield and co_return keywords in the scope of a device function are diagnosed as error during device compilation.
14.5.25.3. Three-way comparison operator
The three-way comparison operator is supported in both host and device code, but some uses implicitly rely on functionality from the Standard Template Library provided by the host implementation. Uses of those operators may require specifying the flag --expt-relaxed-constexpr to silence warnings and the functionality requires that the host implementation satisfies the requirements of device code.
Example:
#include<compare>
struct S {
int x, y, z;
auto operator<=>(const S& rhs) const = default;
__host__ __device__ bool operator<=>(int rhs) const { return false; }
};
__host__ __device__ bool f(S a, S b) {
if (a <=> 1) // ok, calls a user-defined host-device overload
return true;
return a < b; // call to an implicitly-declared function and requires
// a device-compatible std::strong_ordering implementation
}
14.5.25.4. Consteval functions
Ordinarily, cross execution space calls are not allowed, and cause a compiler diagnostic (warning or error). This restriction does not apply when the called function is declared with the consteval specifier. Thus, a __device__ or __global__ function can call a __host__consteval function, and a __host__ function can call a __device__ consteval function.
Example:
namespace N1 {
//consteval host function
consteval int hcallee() { return 10; }
__device__ int dfunc() { return hcallee(); /* OK */ }
__global__ void gfunc() { (void)hcallee(); /* OK */ }
__host__ __device__ int hdfunc() { return hcallee(); /* OK */ }
int hfunc() { return hcallee(); /* OK */ }
} // namespace N1
namespace N2 {
//consteval device function
consteval __device__ int dcallee() { return 10; }
__device__ int dfunc() { return dcallee(); /* OK */ }
__global__ void gfunc() { (void)dcallee(); /* OK */ }
__host__ __device__ int hdfunc() { return dcallee(); /* OK */ }
int hfunc() { return dcallee(); /* OK */ }
}
14.6. Polymorphic Function Wrappers
A polymorphic function wrapper class template nvstd::function is provided in the nvfunctional header. Instances of this class template can be used to store, copy and invoke any callable target, e.g., lambda expressions. nvstd::function can be used in both host and device code.
Example:
#include <nvfunctional>
__device__ int foo_d() { return 1; }
__host__ __device__ int foo_hd () { return 2; }
__host__ int foo_h() { return 3; }
__global__ void kernel(int *result) {
nvstd::function<int()> fn1 = foo_d;
nvstd::function<int()> fn2 = foo_hd;
nvstd::function<int()> fn3 = []() { return 10; };
*result = fn1() + fn2() + fn3();
}
__host__ __device__ void hostdevice_func(int *result) {
nvstd::function<int()> fn1 = foo_hd;
nvstd::function<int()> fn2 = []() { return 10; };
*result = fn1() + fn2();
}
__host__ void host_func(int *result) {
nvstd::function<int()> fn1 = foo_h;
nvstd::function<int()> fn2 = foo_hd;
nvstd::function<int()> fn3 = []() { return 10; };
*result = fn1() + fn2() + fn3();
}
Instances of nvstd::function in host code cannot be initialized with the address of a __device__ function or with a functor whose operator() is a __device__ function. Instances of nvstd::function in device code cannot be initialized with the address of a __host__ function or with a functor whose operator() is a __host__ function.
nvstd::function instances cannot be passed from host code to device code (and vice versa) at run time. nvstd::function cannot be used in the parameter type of a __global__ function, if the __global__ function is launched from host code.
Example:
#include <nvfunctional>
__device__ int foo_d() { return 1; }
__host__ int foo_h() { return 3; }
auto lam_h = [] { return 0; };
__global__ void k(void) {
// error: initialized with address of __host__ function
nvstd::function<int()> fn1 = foo_h;
// error: initialized with address of functor with
// __host__ operator() function
nvstd::function<int()> fn2 = lam_h;
}
__global__ void kern(nvstd::function<int()> f1) { }
void foo(void) {
// error: initialized with address of __device__ function
nvstd::function<int()> fn1 = foo_d;
auto lam_d = [=] __device__ { return 1; };
// error: initialized with address of functor with
// __device__ operator() function
nvstd::function<int()> fn2 = lam_d;
// error: passing nvstd::function from host to device
kern<<<1,1>>>(fn2);
}
nvstd::function is defined in the nvfunctional header as follows:
namespace nvstd {
template <class _RetType, class ..._ArgTypes>
class function<_RetType(_ArgTypes...)>
{
public:
// constructors
__device__ __host__ function() noexcept;
__device__ __host__ function(nullptr_t) noexcept;
__device__ __host__ function(const function &);
__device__ __host__ function(function &&);
template<class _F>
__device__ __host__ function(_F);
// destructor
__device__ __host__ ~function();
// assignment operators
__device__ __host__ function& operator=(const function&);
__device__ __host__ function& operator=(function&&);
__device__ __host__ function& operator=(nullptr_t);
__device__ __host__ function& operator=(_F&&);
// swap
__device__ __host__ void swap(function&) noexcept;
// function capacity
__device__ __host__ explicit operator bool() const noexcept;
// function invocation
__device__ _RetType operator()(_ArgTypes...) const;
};
// null pointer comparisons
template <class _R, class... _ArgTypes>
__device__ __host__
bool operator==(const function<_R(_ArgTypes...)>&, nullptr_t) noexcept;
template <class _R, class... _ArgTypes>
__device__ __host__
bool operator==(nullptr_t, const function<_R(_ArgTypes...)>&) noexcept;
template <class _R, class... _ArgTypes>
__device__ __host__
bool operator!=(const function<_R(_ArgTypes...)>&, nullptr_t) noexcept;
template <class _R, class... _ArgTypes>
__device__ __host__
bool operator!=(nullptr_t, const function<_R(_ArgTypes...)>&) noexcept;
// specialized algorithms
template <class _R, class... _ArgTypes>
__device__ __host__
void swap(function<_R(_ArgTypes...)>&, function<_R(_ArgTypes...)>&);
}
14.7. Extended Lambdas
The nvcc flag '--extended-lambda' allows explicit execution space annotations in a lambda expression 29. The execution space annotations should be present after the ‘lambda-introducer’ and before the optional ‘lambda-declarator’. nvcc will define the macro __CUDACC_EXTENDED_LAMBDA__ when the '--extended-lambda' flag has been specified.
An ‘extended __device__ lambda’ is a lambda expression that is annotated explicitly with ‘__device__’, and is defined within the immediate or nested block scope of a __host__ or __host__ __device__ function.
An ‘extended __host__ __device__ lambda’ is a lambda expression that is annotated explicitly with both ‘__host__’ and ‘__device__’, and is defined within the immediate or nested block scope of a __host__ or __host__ __device__ function.
An ‘extended lambda’ denotes either an extended __device__ lambda or an extended __host__ __device__ lambda. Extended lambdas can be used in the type arguments of __global__ function template instantiation.
If the execution space annotations are not explicitly specified, they are computed based on the scopes enclosing the closure class associated with the lambda, as described in the section on C++11 support. The execution space annotations are applied to all methods of the closure class associated with the lambda.
Example:
void foo_host(void) {
// not an extended lambda: no explicit execution space annotations
auto lam1 = [] { };
// extended __device__ lambda
auto lam2 = [] __device__ { };
// extended __host__ __device__ lambda
auto lam3 = [] __host__ __device__ { };
// not an extended lambda: explicitly annotated with only '__host__'
auto lam4 = [] __host__ { };
}
__host__ __device__ void foo_host_device(void) {
// not an extended lambda: no explicit execution space annotations
auto lam1 = [] { };
// extended __device__ lambda
auto lam2 = [] __device__ { };
// extended __host__ __device__ lambda
auto lam3 = [] __host__ __device__ { };
// not an extended lambda: explicitly annotated with only '__host__'
auto lam4 = [] __host__ { };
}
__device__ void foo_device(void) {
// none of the lambdas within this function are extended lambdas,
// because the enclosing function is not a __host__ or __host__ __device__
// function.
auto lam1 = [] { };
auto lam2 = [] __device__ { };
auto lam3 = [] __host__ __device__ { };
auto lam4 = [] __host__ { };
}
// lam1 and lam2 are not extended lambdas because they are not defined
// within a __host__ or __host__ __device__ function.
auto lam1 = [] { };
auto lam2 = [] __host__ __device__ { };
14.7.1. Extended Lambda Type Traits
The compiler provides type traits to detect closure types for extended lambdas at compile time:
__nv_is_extended_device_lambda_closure_type(type): If ‘type’ is the closure class created for an extended __device__ lambda, then the trait is true, otherwise it is false.
__nv_is_extended_device_lambda_with_preserved_return_type(type): If ‘type’ is the closure class created for an extended __device__ lambda and the lambda is defined with trailing return type (with restriction), then the trait is true, otherwise it is false. If the trailing return type definition refers to any lambda parameter name, the return type is not preserved.
__nv_is_extended_host_device_lambda_closure_type(type): If ‘type’ is the closure class created for an extended __host__ __device__ lambda, then the trait is true, otherwise it is false.
These traits can be used in all compilation modes, irrespective of whether lambdas or extended lambdas are enabled30.
Example:
#define IS_D_LAMBDA(X) __nv_is_extended_device_lambda_closure_type(X)
#define IS_DPRT_LAMBDA(X) __nv_is_extended_device_lambda_with_preserved_return_type(X)
#define IS_HD_LAMBDA(X) __nv_is_extended_host_device_lambda_closure_type(X)
auto lam0 = [] __host__ __device__ { };
void foo(void) {
auto lam1 = [] { };
auto lam2 = [] __device__ { };
auto lam3 = [] __host__ __device__ { };
auto lam4 = [] __device__ () --> double { return 3.14; }
auto lam5 = [] __device__ (int x) --> decltype(&x) { return 0; }
// lam0 is not an extended lambda (since defined outside function scope)
static_assert(!IS_D_LAMBDA(decltype(lam0)), "");
static_assert(!IS_DPRT_LAMBDA(decltype(lam0)), "");
static_assert(!IS_HD_LAMBDA(decltype(lam0)), "");
// lam1 is not an extended lambda (since no execution space annotations)
static_assert(!IS_D_LAMBDA(decltype(lam1)), "");
static_assert(!IS_DPRT_LAMBDA(decltype(lam1)), "");
static_assert(!IS_HD_LAMBDA(decltype(lam1)), "");
// lam2 is an extended __device__ lambda
static_assert(IS_D_LAMBDA(decltype(lam2)), "");
static_assert(!IS_DPRT_LAMBDA(decltype(lam2)), "");
static_assert(!IS_HD_LAMBDA(decltype(lam2)), "");
// lam3 is an extended __host__ __device__ lambda
static_assert(!IS_D_LAMBDA(decltype(lam3)), "");
static_assert(!IS_DPRT_LAMBDA(decltype(lam3)), "");
static_assert(IS_HD_LAMBDA(decltype(lam3)), "");
// lam4 is an extended __device__ lambda with preserved return type
static_assert(IS_D_LAMBDA(decltype(lam4)), "");
static_assert(IS_DPRT_LAMBDA(decltype(lam4)), "");
static_assert(!IS_HD_LAMBDA(decltype(lam4)), "");
// lam5 is not an extended __device__ lambda with preserved return type
// because it references the operator()'s parameter types in the trailing return type.
static_assert(IS_D_LAMBDA(decltype(lam5)), "");
static_assert(!IS_DPRT_LAMBDA(decltype(lam5)), "");
static_assert(!IS_HD_LAMBDA(decltype(lam5)), "");
}
14.7.2. Extended Lambda Restrictions
The CUDA compiler will replace an extended lambda expression with an instance of a placeholder type defined in namespace scope, before invoking the host compiler. The template argument of the placeholder type requires taking the address of a function enclosing the original extended lambda expression. This is required for the correct execution of any __global__ function template whose template argument involves the closure type of an extended lambda. The enclosing function is computed as follows.
By definition, the extended lambda is present within the immediate or nested block scope of a __host__ or __host__ __device__ function. If this function is not the operator() of a lambda expression, then it is considered the enclosing function for the extended lambda. Otherwise, the extended lambda is defined within the immediate or nested block scope of the operator() of one or more enclosing lambda expressions. If the outermost such lambda expression is defined in the immediate or nested block scope of a function F, then F is the computed enclosing function, else the enclosing function does not exist.
Example:
void foo(void) {
// enclosing function for lam1 is "foo"
auto lam1 = [] __device__ { };
auto lam2 = [] {
auto lam3 = [] {
// enclosing function for lam4 is "foo"
auto lam4 = [] __host__ __device__ { };
};
};
}
auto lam6 = [] {
// enclosing function for lam7 does not exist
auto lam7 = [] __host__ __device__ { };
};
Here are the restrictions on extended lambdas:
-
An extended lambda cannot be defined inside another extended lambda expression.
Example:
void foo(void) { auto lam1 = [] __host__ __device__ { // error: extended lambda defined within another extended lambda auto lam2 = [] __host__ __device__ { }; }; }
-
An extended lambda cannot be defined inside a generic lambda expression.
Example:
void foo(void) { auto lam1 = [] (auto) { // error: extended lambda defined within a generic lambda auto lam2 = [] __host__ __device__ { }; }; }
-
If an extended lambda is defined within the immediate or nested block scope of one or more nested lambda expression, the outermost such lambda expression must be defined inside the immediate or nested block scope of a function.
Example:
auto lam1 = [] { // error: outer enclosing lambda is not defined within a // non-lambda-operator() function. auto lam2 = [] __host__ __device__ { }; };
-
The enclosing function for the extended lambda must be named and its address can be taken. If the enclosing function is a class member, then the following conditions must be satisfied:
All classes enclosing the member function must have a name.
The member function must not have private or protected access within its parent class.
All enclosing classes must not have private or protected access within their respective parent classes.
Example:
void foo(void) { // OK auto lam1 = [] __device__ { return 0; }; { // OK auto lam2 = [] __device__ { return 0; }; // OK auto lam3 = [] __device__ __host__ { return 0; }; } } struct S1_t { S1_t(void) { // Error: cannot take address of enclosing function auto lam4 = [] __device__ { return 0; }; } }; class C0_t { void foo(void) { // Error: enclosing function has private access in parent class auto temp1 = [] __device__ { return 10; }; } struct S2_t { void foo(void) { // Error: enclosing class S2_t has private access in its // parent class auto temp1 = [] __device__ { return 10; }; } }; };
-
It must be possible to take the address of the enclosing routine unambiguously, at the point where the extended lambda has been defined. This may not be feasible in some cases e.g. when a class typedef shadows a template type argument of the same name.
Example:
template <typename> struct A { typedef void Bar; void test(); }; template<> struct A<void> { }; template <typename Bar> void A<Bar>::test() { /* In code sent to host compiler, nvcc will inject an address expression here, of the form: (void (A< Bar> ::*)(void))(&A::test)) However, the class typedef 'Bar' (to void) shadows the template argument 'Bar', causing the address expression in A<int>::test to actually refer to: (void (A< void> ::*)(void))(&A::test)) ..which doesn't take the address of the enclosing routine 'A<int>::test' correctly. */ auto lam1 = [] __host__ __device__ { return 4; }; } int main() { A<int> xxx; xxx.test(); }
-
An extended lambda cannot be defined in a class that is local to a function.
Example:
void foo(void) { struct S1_t { void bar(void) { // Error: bar is member of a class that is local to a function. auto lam4 = [] __host__ __device__ { return 0; }; } }; }
-
The enclosing function for an extended lambda cannot have deduced return type.
Example:
auto foo(void) { // Error: the return type of foo is deduced. auto lam1 = [] __host__ __device__ { return 0; }; }
-
__host__ __device__ extended lambdas cannot be generic lambdas.
Example:
void foo(void) { // Error: __host__ __device__ extended lambdas cannot be // generic lambdas. auto lam1 = [] __host__ __device__ (auto i) { return i; }; // Error: __host__ __device__ extended lambdas cannot be // generic lambdas. auto lam2 = [] __host__ __device__ (auto ...i) { return sizeof...(i); }; }
-
If the enclosing function is an instantiation of a function template or a member function template, and/or the function is a member of a class template, the template(s) must satisfy the following constraints:
The template must have at most one variadic parameter, and it must be listed last in the template parameter list.
The template parameters must be named.
The template instantiation argument types cannot involve types that are either local to a function (except for closure types for extended lambdas), or are private or protected class members.
Example:
template <typename T> __global__ void kern(T in) { in(); } template <typename... T> struct foo {}; template < template <typename...> class T, typename... P1, typename... P2> void bar1(const T<P1...>, const T<P2...>) { // Error: enclosing function has multiple parameter packs auto lam1 = [] __device__ { return 10; }; } template < template <typename...> class T, typename... P1, typename T2> void bar2(const T<P1...>, T2) { // Error: for enclosing function, the // parameter pack is not last in the template parameter list. auto lam1 = [] __device__ { return 10; }; } template <typename T, T> void bar3(void) { // Error: for enclosing function, the second template // parameter is not named. auto lam1 = [] __device__ { return 10; }; } int main() { foo<char, int, float> f1; foo<char, int> f2; bar1(f1, f2); bar2(f1, 10); bar3<int, 10>(); }
Example:
template <typename T> __global__ void kern(T in) { in(); } template <typename T> void bar4(void) { auto lam1 = [] __device__ { return 10; }; kern<<<1,1>>>(lam1); } struct C1_t { struct S1_t { }; friend int main(void); }; int main() { struct S1_t { }; // Error: enclosing function for device lambda in bar4 // is instantiated with a type local to main. bar4<S1_t>(); // Error: enclosing function for device lambda in bar4 // is instantiated with a type that is a private member // of a class. bar4<C1_t::S1_t>(); }
With Visual Studio host compilers, the enclosing function must have external linkage. The restriction is present because this host compiler does not support using the address of non-extern linkage functions as template arguments, which is needed by the CUDA compiler transformations to support extended lambdas.
With Visual Studio host compilers, an extended lambda shall not be defined within the body of an ‘if-constexpr’ block.
-
An extended lambda has the following restrictions on captured variables:
In the code sent to the host compiler, the variable may be passed by value to a sequence of helper functions before being used to direct-initialize the field of the class type used to represent the closure type for the extended lambda31.
A variable can only be captured by value.
A variable of array type cannot be captured if the number of array dimensions is greater than 7.
For a variable of array type, in the code sent to the host compiler, the closure type’s array field is first default-initialized, and then each element of the array field is copy-assigned from the corresponding element of the captured array variable. Therefore, the array element type must be default-constructible and copy-assignable in host code.
A function parameter that is an element of a variadic argument pack cannot be captured.
The type of the captured variable cannot involve types that are either local to a function (except for closure types of extended lambdas), or are private or protected class members.
For a __host__ __device__ extended lambda, the types used in the return or parameter types of the lambda expression’s
operator()cannot involve types that are either local to a function (except for closure types of extended lambdas), or are private or protected class members.Init-capture is not supported for __host__ __device__ extended lambdas. Init-capture is supported for __device__ extended lambdas, except when the init-capture is of array type or of type
std::initializer_list.The function call operator for an extended lambda is not constexpr. The closure type for an extended lambda is not a literal type. The constexpr and consteval specifier cannot be used in the declaration of an extended lambda.
A variable cannot be implicitly captured inside an if-constexpr block lexically nested inside an extended lambda, unless it has already been implicitly captured earlier outside the if-constexpr block or appears in the explicit capture list for the extended lambda (see example below).
Example
void foo(void) { // OK: an init-capture is allowed for an // extended __device__ lambda. auto lam1 = [x = 1] __device__ () { return x; }; // Error: an init-capture is not allowed for // an extended __host__ __device__ lambda. auto lam2 = [x = 1] __host__ __device__ () { return x; }; int a = 1; // Error: an extended __device__ lambda cannot capture // variables by reference. auto lam3 = [&a] __device__ () { return a; }; // Error: by-reference capture is not allowed // for an extended __device__ lambda. auto lam4 = [&x = a] __device__ () { return x; }; struct S1_t { }; S1_t s1; // Error: a type local to a function cannot be used in the type // of a captured variable. auto lam6 = [s1] __device__ () { }; // Error: an init-capture cannot be of type std::initializer_list. auto lam7 = [x = {11}] __device__ () { }; std::initializer_list<int> b = {11,22,33}; // Error: an init-capture cannot be of type std::initializer_list. auto lam8 = [x = b] __device__ () { }; // Error scenario (lam9) and supported scenarios (lam10, lam11) // for capture within 'if-constexpr' block int yyy = 4; auto lam9 = [=] __device__ { int result = 0; if constexpr(false) { //Error: An extended __device__ lambda cannot first-capture // 'yyy' in constexpr-if context result += yyy; } return result; }; auto lam10 = [yyy] __device__ { int result = 0; if constexpr(false) { //OK: 'yyy' already listed in explicit capture list for the extended lambda result += yyy; } return result; }; auto lam11 = [=] __device__ { int result = yyy; if constexpr(false) { //OK: 'yyy' already implicit captured outside the 'if-constexpr' block result += yyy; } return result; }; }
-
When parsing a function, the CUDA compiler assigns a counter value to each extended lambda within that function. This counter value is used in the substituted named type passed to the host compiler. Hence, whether or not an extended lambda is defined within a function should not depend on a particular value of
__CUDA_ARCH__, or on__CUDA_ARCH__being undefined.Example
template <typename T> __global__ void kernel(T in) { in(); } __host__ __device__ void foo(void) { // Error: the number and relative declaration // order of extended lambdas depends on // __CUDA_ARCH__ #if defined(__CUDA_ARCH__) auto lam1 = [] __device__ { return 0; }; auto lam1b = [] __host___ __device__ { return 10; }; #endif auto lam2 = [] __device__ { return 4; }; kernel<<<1,1>>>(lam2); }
-
As described above, the CUDA compiler replaces a
__device__extended lambda defined in a host function with a placeholder type defined in namespace scope. Unless the trait__nv_is_extended_device_lambda_with_preserved_return_type()returns true for the closure type of the extended lambda, the placeholder type does not define aoperator()function equivalent to the original lambda declaration. An attempt to determine the return type or parameter types of theoperator()function of such a lambda may therefore work incorrectly in host code, as the code processed by the host compiler will be semantically different than the input code processed by the CUDA compiler. However, it is OK to introspect the return type or parameter types of theoperator()function within device code. Note that this restriction does not apply to__host__ __device__extended lambdas, or to__device__extended lambdas for which the trait__nv_is_extended_device_lambda_with_preserved_return_type()returns true.Example
#include <type_traits> const char& getRef(const char* p) { return *p; } void foo(void) { auto lam1 = [] __device__ { return "10"; }; // Error: attempt to extract the return type // of a __device__ lambda in host code std::result_of<decltype(lam1)()>::type xx1 = "abc"; auto lam2 = [] __host__ __device__ { return "10"; }; // OK : lam2 represents a __host__ __device__ extended lambda std::result_of<decltype(lam2)()>::type xx2 = "abc"; auto lam3 = [] __device__ () -> const char * { return "10"; }; // OK : lam3 represents a __device__ extended lambda with preserved return type std::result_of<decltype(lam3)()>::type xx2 = "abc"; static_assert( std::is_same_v< std::result_of<decltype(lam3)()>::type, const char *>); auto lam4 = [] __device__ (char x) -> decltype(getRef(&x)) { return 0; }; // lam4's return type is not preserved because it references the operator()'s // parameter types in the trailing return type. static_assert( ! __nv_is_extended_device_lambda_with_preserved_return_type(decltype(lam4)), "" ); }
For an extended device lambda: - Introspecting the parameter type of operator() is only supported in device code. - Introspecting the return type of operator() is supported only in device code, unless the trait function __nv_is_extended_device_lambda_with_preserved_return_type() returns true.
-
If the functor object represented by an extended lambda is passed from host to device code (e.g., as the argument of a
__global__function), then any expression in the body of the lambda expression that captures variables must be remain unchanged irrespective of whether the__CUDA_ARCH__macro is defined, and whether the macro has a particular value. This restriction arises because the lambda’s closure class layout depends on the order in which captured variables are encountered when the compiler processes the lambda expression; the program may execute incorrectly if the closure class layout differs in device and host compilation.Example
__device__ int result; template <typename T> __global__ void kernel(T in) { result = in(); } void foo(void) { int x1 = 1; auto lam1 = [=] __host__ __device__ { // Error: "x1" is only captured when __CUDA_ARCH__ is defined. #ifdef __CUDA_ARCH__ return x1 + 1; #else return 10; #endif }; kernel<<<1,1>>>(lam1); }
-
As described previously, the CUDA compiler replaces an extended
__device__lambda expression with an instance of a placeholder type in the code sent to the host compiler. This placeholder type does not define a pointer-to-function conversion operator in host code, however the conversion operator is provided in device code. Note that this restriction does not apply to__host__ __device__extended lambdas.Example
template <typename T> __global__ void kern(T in) { int (*fp)(double) = in; // OK: conversion in device code is supported fp(0); auto lam1 = [](double) { return 1; }; // OK: conversion in device code is supported fp = lam1; fp(0); } void foo(void) { auto lam_d = [] __device__ (double) { return 1; }; auto lam_hd = [] __host__ __device__ (double) { return 1; }; kern<<<1,1>>>(lam_d); kern<<<1,1>>>(lam_hd); // OK : conversion for __host__ __device__ lambda is supported // in host code int (*fp)(double) = lam_hd; // Error: conversion for __device__ lambda is not supported in // host code. int (*fp2)(double) = lam_d; }
-
As described previously, the CUDA compiler replaces an extended
__device__or__host__ __device__lambda expression with an instance of a placeholder type in the code sent to the host compiler. This placeholder type may define C++ special member functions (e.g. constructor, destructor). As a result, some standard C++ type traits may return different results for the closure type of the extended lambda, in the CUDA frontend compiler versus the host compiler. The following type traits are affected:std::is_trivially_copyable,std::is_trivially_constructible,std::is_trivially_copy_constructible,std::is_trivially_move_constructible,std::is_trivially_destructible.Care must be taken that the results of these type traits are not used in
__global__function template instantiation or in__device__ / __constant__ / __managed__variable template instantiation.Example
template <bool b> void __global__ foo() { printf("hi"); } template <typename T> void dolaunch() { // ERROR: this kernel launch may fail, because CUDA frontend compiler // and host compiler may disagree on the result of // std::is_trivially_copyable() trait on the closure type of the // extended lambda foo<std::is_trivially_copyable<T>::value><<<1,1>>>(); cudaDeviceSynchronize(); } int main() { int x = 0; auto lam1 = [=] __host__ __device__ () { return x; }; dolaunch<decltype(lam1)>(); }
The CUDA compiler will generate compiler diagnostics for a subset of cases described in 1-12; no diagnostic will be generated for cases 13-17, but the host compiler may fail to compile the generated code.
14.7.3. Notes on __host__ __device__ lambdas
Unlike __device__ lambdas, __host__ __device__ lambdas can be called from host code. As described earlier, the CUDA compiler replaces an extended lambda expression defined in host code with an instance of a named placeholder type. The placeholder type for an extended __host__ __device__ lambda invokes the original lambda’s operator() with an indirect function call 30.
The presence of the indirect function call may cause an extended __host__ __device__ lambda to be less optimized by the host compiler than lambdas that are implicitly or explicitly __host__ only. In the latter case, the host compiler can easily inline the body of the lambda into the calling context. But in case of an extended __host__ __device__ lambda, the host compiler encounters the indirect function call and may not be able to easily inline the original __host__ __device__ lambda body.
14.7.4. *this Capture By Value
When a lambda is defined within a non-static class member function, and the body of the lambda refers to a class member variable, C++11/C++14 rules require that the this pointer of the class is captured by value, instead of the referenced member variable. If the lambda is an extended __device__ or __host____device__ lambda defined in a host function, and the lambda is executed on the GPU, accessing the referenced member variable on the GPU will cause a run time error if the this pointer points to host memory.
Example:
#include <cstdio>
template <typename T>
__global__ void foo(T in) { printf("\n value = %d", in()); }
struct S1_t {
int xxx;
__host__ __device__ S1_t(void) : xxx(10) { };
void doit(void) {
auto lam1 = [=] __device__ {
// reference to "xxx" causes
// the 'this' pointer (S1_t*) to be captured by value
return xxx + 1;
};
// Kernel launch fails at run time because 'this->xxx'
// is not accessible from the GPU
foo<<<1,1>>>(lam1);
cudaDeviceSynchronize();
}
};
int main(void) {
S1_t s1;
s1.doit();
}
C++17 solves this problem by adding a new “*this” capture mode. In this mode, the compiler makes a copy of the object denoted by “*this” instead of capturing the pointer this by value. The “*this” capture mode is described in more detail here: https://www.open-std.org/jtc1/sc22/wg21/docs/papers/2016/p0018r3.html .
The CUDA compiler supports the “*this” capture mode for lambdas defined within __device__ and __global__ functions and for extended __device__ lambdas defined in host code, when the --extended-lambda nvcc flag is used.
Here’s the above example modified to use “*this” capture mode:
#include <cstdio>
template <typename T>
__global__ void foo(T in) { printf("\n value = %d", in()); }
struct S1_t {
int xxx;
__host__ __device__ S1_t(void) : xxx(10) { };
void doit(void) {
// note the "*this" capture specification
auto lam1 = [=, *this] __device__ {
// reference to "xxx" causes
// the object denoted by '*this' to be captured by
// value, and the GPU code will access copy_of_star_this->xxx
return xxx + 1;
};
// Kernel launch succeeds
foo<<<1,1>>>(lam1);
cudaDeviceSynchronize();
}
};
int main(void) {
S1_t s1;
s1.doit();
}
“*this” capture mode is not allowed for unannotated lambdas defined in host code, or for extended __host____device__ lambdas. Examples of supported and unsupported usage:
struct S1_t {
int xxx;
__host__ __device__ S1_t(void) : xxx(10) { };
void host_func(void) {
// OK: use in an extended __device__ lambda
auto lam1 = [=, *this] __device__ { return xxx; };
// Error: use in an extended __host__ __device__ lambda
auto lam2 = [=, *this] __host__ __device__ { return xxx; };
// Error: use in an unannotated lambda in host function
auto lam3 = [=, *this] { return xxx; };
}
__device__ void device_func(void) {
// OK: use in a lambda defined in a __device__ function
auto lam1 = [=, *this] __device__ { return xxx; };
// OK: use in a lambda defined in a __device__ function
auto lam2 = [=, *this] __host__ __device__ { return xxx; };
// OK: use in a lambda defined in a __device__ function
auto lam3 = [=, *this] { return xxx; };
}
__host__ __device__ void host_device_func(void) {
// OK: use in an extended __device__ lambda
auto lam1 = [=, *this] __device__ { return xxx; };
// Error: use in an extended __host__ __device__ lambda
auto lam2 = [=, *this] __host__ __device__ { return xxx; };
// Error: use in an unannotated lambda in a __host__ __device__ function
auto lam3 = [=, *this] { return xxx; };
}
};
14.7.5. Additional Notes
-
ADL Lookup: As described earlier, the CUDA compiler will replace an extended lambda expression with an instance of a placeholder type, before invoking the host compiler. One template argument of the placeholder type uses the address of the function enclosing the original lambda expression. This may cause additional namespaces to participate in argument dependent lookup (ADL), for any host function call whose argument types involve the closure type of the extended lambda expression. This may cause an incorrect function to be selected by the host compiler.Example:
namespace N1 { struct S1_t { }; template <typename T> void foo(T); }; namespace N2 { template <typename T> int foo(T); template <typename T> void doit(T in) { foo(in); } } void bar(N1::S1_t in) { /* extended __device__ lambda. In the code sent to the host compiler, this is replaced with the placeholder type instantiation expression ' __nv_dl_wrapper_t< __nv_dl_tag<void (*)(N1::S1_t in),(&bar),1> > { }' As a result, the namespace 'N1' participates in ADL lookup of the call to "foo" in the body of N2::doit, causing ambiguity. */ auto lam1 = [=] __device__ { }; N2::doit(lam1); }
In the example above, the CUDA compiler replaced the extended lambda with a placeholder type that involves the
N1namespace. As a result, the namespaceN1participates in the ADL lookup forfoo(in)in the body ofN2::doit, and host compilation fails because multiple overload candidatesN1::fooandN2::fooare found.
14.8. Code Samples
14.8.1. Data Aggregation Class
class PixelRGBA {
public:
__device__ PixelRGBA(): r_(0), g_(0), b_(0), a_(0) { }
__device__ PixelRGBA(unsigned char r, unsigned char g,
unsigned char b, unsigned char a = 255):
r_(r), g_(g), b_(b), a_(a) { }
private:
unsigned char r_, g_, b_, a_;
friend PixelRGBA operator+(const PixelRGBA&, const PixelRGBA&);
};
__device__
PixelRGBA operator+(const PixelRGBA& p1, const PixelRGBA& p2)
{
return PixelRGBA(p1.r_ + p2.r_, p1.g_ + p2.g_,
p1.b_ + p2.b_, p1.a_ + p2.a_);
}
__device__ void func(void)
{
PixelRGBA p1, p2;
// ... // Initialization of p1 and p2 here
PixelRGBA p3 = p1 + p2;
}
14.8.2. Derived Class
__device__ void* operator new(size_t bytes, MemoryPool& p);
__device__ void operator delete(void*, MemoryPool& p);
class Shape {
public:
__device__ Shape(void) { }
__device__ void putThis(PrintBuffer *p) const;
__device__ virtual void Draw(PrintBuffer *p) const {
p->put("Shapeless");
}
__device__ virtual ~Shape() {}
};
class Point : public Shape {
public:
__device__ Point() : x(0), y(0) {}
__device__ Point(int ix, int iy) : x(ix), y(iy) { }
__device__ void PutCoord(PrintBuffer *p) const;
__device__ void Draw(PrintBuffer *p) const;
__device__ ~Point() {}
private:
int x, y;
};
__device__ Shape* GetPointObj(MemoryPool& pool)
{
Shape* shape = new(pool) Point(rand(-20,10), rand(-100,-20));
return shape;
}
14.8.3. Class Template
template <class T>
class myValues {
T values[MAX_VALUES];
public:
__device__ myValues(T clear) { ... }
__device__ void setValue(int Idx, T value) { ... }
__device__ void putToMemory(T* valueLocation) { ... }
};
template <class T>
void __global__ useValues(T* memoryBuffer) {
myValues<T> myLocation(0);
...
}
__device__ void* buffer;
int main()
{
...
useValues<int><<<blocks, threads>>>(buffer);
...
}
14.8.4. Function Template
template <typename T>
__device__ bool func(T x)
{
...
return (...);
}
template <>
__device__ bool func<int>(T x) // Specialization
{
return true;
}
// Explicit argument specification
bool result = func<double>(0.5);
// Implicit argument deduction
int x = 1;
bool result = func(x);
14.8.5. Functor Class
class Add {
public:
__device__ float operator() (float a, float b) const
{
return a + b;
}
};
class Sub {
public:
__device__ float operator() (float a, float b) const
{
return a - b;
}
};
// Device code
template<class O> __global__
void VectorOperation(const float * A, const float * B, float * C,
unsigned int N, O op)
{
unsigned int iElement = blockDim.x * blockIdx.x + threadIdx.x;
if (iElement < N)
C[iElement] = op(A[iElement], B[iElement]);
}
// Host code
int main()
{
...
VectorOperation<<<blocks, threads>>>(v1, v2, v3, N, Add());
...
}
- 15
-
e.g., the
<<<...>>>syntax for launching kernels. - 16
-
This does not apply to entities that may be defined in more than one translation unit, such as compiler generated template instantiations.
- 17
-
The intent is to allow variable memory space specifiers for static variables in a
__host__ __device__function during device compilation, but disallow it during host compilation - 18
-
One way to debug suspected layout mismatch of a type
Cis to useprintfto output the values ofsizeof(C)andoffsetof(C, field)in host and device code. - 19
-
Note that this may negatively impact compile time due to presence of extra declarations.
- 20
-
At present, the
-std=c++11flag is supported only for the following host compilers : gcc version >= 4.7, clang, icc >= 15, and xlc >= 13.1 - 21
-
including
operator() - 22
-
The restrictions are the same as with a non-constexpr callee function.
- 23
-
Note that the behavior of experimental flags may change in future compiler releases.
- 24
-
C++ Standard Section
[basic.types] - 25
-
C++ Standard Section
[expr.const] - 26
-
At present, the
-std=c++14flag is supported only for the following host compilers : gcc version >= 5.1, clang version >= 3.7 and icc version >= 17 - 27
-
At present, the
-std=c++17flag is supported only for the following host compilers : gcc version >= 7.0, clang version >= 8.0, Visual Studio version >= 2017, pgi compiler version >= 19.0, icc compiler version >= 19.0 - 28
-
At present, the
-std=c++20flag is supported only for the following host compilers : gcc version >= 10.0, clang version >= 10.0, Visual Studio Version >= 2022 and nvc++ version >= 20.7. - 29
-
When using the icc host compiler, this flag is only supported for icc >= 1800.
- 30(1,2)
-
The traits will always return false if extended lambda mode is not active.
- 31
-
In contrast, the C++ standard specifies that the captured variable is used to direct-initialize the field of the closure type.
15. Texture Fetching
This section gives the formula used to compute the value returned by the texture functions of Texture Functions depending on the various attributes of the texture object (see Texture and Surface Memory).
The texture bound to the texture object is represented as an array T of
N texels for a one-dimensional texture,
N x M texels for a two-dimensional texture,
N x M x L texels for a three-dimensional texture.
It is fetched using non-normalized texture coordinates x, y, and z, or the normalized texture coordinates x/N, y/M, and z/L as described in Texture Memory. In this section, the coordinates are assumed to be in the valid range. Texture Memory explained how out-of-range coordinates are remapped to the valid range based on the addressing mode.
15.1. Nearest-Point Sampling
In this filtering mode, the value returned by the texture fetch is
tex(x)=T[i] for a one-dimensional texture,
tex(x,y)=T[i,j] for a two-dimensional texture,
tex(x,y,z)=T[i,j,k] for a three-dimensional texture,
where i=floor(x), j=floor(y), and k=floor(z).
Figure 32 illustrates nearest-point sampling for a one-dimensional texture with N=4.
Figure 32 Nearest-Point Sampling Filtering Mode
For integer textures, the value returned by the texture fetch can be optionally remapped to [0.0, 1.0] (see Texture Memory).
15.2. Linear Filtering
In this filtering mode, which is only available for floating-point textures, the value returned by the texture fetch is
\(tex(x)=(1-\alpha)T[i]+{\alpha}T[i+1]\) for a one-dimensional texture,
\(tex(x)=(1-\alpha)T[i]+{\alpha}T[i+1]\) for a one-dimensional texture,
\(tex(x,y)=(1-\alpha)(1-\beta)T[i,j]+\alpha(1-\beta)T[i+1,j]+(1-\alpha){\beta}T[i,j+1]+\alpha{\beta}T[i+1,j+1]\) for a two-dimensional texture,
-
\(tex(x,y,z)\) =
\((1-\alpha)(1-\beta)(1-\gamma)T[i,j,k]+\alpha(1-\beta)(1-\gamma)T[i+1,j,k]+\)
\((1-\alpha)\beta(1-\gamma)T[i,j+1,k]+\alpha\beta(1-\gamma)T[i+1,j+1,k]+\)
\((1-\alpha)(1-\beta){\gamma}T[i,j,k+1]+\alpha(1-\beta){\gamma}T[i+1,j,k+1]+\)
\((1-\alpha)\beta{\gamma}T[i,j+1,k+1]+\alpha\beta{\gamma}T[i+1,j+1,k+1]\)
for a three-dimensional texture,
where:
\(i=floor(x\ B)*, \alpha=frac(x\ B)*, *x\ B\ =x-0.5,\)
\(j=floor(y\ B)*, \beta=frac(y\ B)*, *y\ B\ =y-0.5,\)
\(k=floor(z\ B)*, \gamma=frac(z\ B)*, *z\ B\ = z-0.5,\)
\(\alpha\), \(\beta\), and \(\gamma\) are stored in 9-bit fixed point format with 8 bits of fractional value (so 1.0 is exactly represented).
Figure 33 illustrates linear filtering of a one-dimensional texture with N=4.
Figure 33 Linear Filtering Mode
15.3. Table Lookup
A table lookup TL(x) where x spans the interval [0,R] can be implemented as TL(x)=tex((N-1)/R)x+0.5) in order to ensure that TL(0)=T[0] and TL(R)=T[N-1].
Figure 34 illustrates the use of texture filtering to implement a table lookup with R=4 or R=1 from a one-dimensional texture with N=4.
Figure 34 One-Dimensional Table Lookup Using Linear Filtering
16. Compute Capabilities
The general specifications and features of a compute device depend on its compute capability (see Compute Capability).
Table 20 and Table 21 show the features and technical specifications associated with each compute capability that is currently supported.
Floating-Point Standard reviews the compliance with the IEEE floating-point standard.
Sections Compute Capability 5.x, Compute Capability 6.x, Compute Capability 7.x, Compute Capability 8.x and Compute Capability 9.0 give more details on the architecture of devices of compute capabilities 5.x, 6.x, 7.x, 8.x and 9.0 respectively.
16.1. Feature Availability
A compute feature is introduced with a compute architecture with the intention that the feature will be available on all subsequent architectures. This is shown in Table 20 by the “yes” for availability of a feature on compute capabilities subsequent to its introduction.
Highly specialized compute features that are introduced with an architecture may not be guaranteed to be available on all subsequent compute capabilities. These features target acceleration of specialized operations which are not intended for all classes of compute capabilities (denoted by the compute capability’s minor number) or are likely to significantly change on future generations (denoted by the compute capability’s major number).
There are potentially two sets of compute features for a given compute capability:
Compute Capability #.#: The predominant set of compute features that are introduced with the intent to be available for subsequent compute architectures. These features and their availability are summarized in Table 20.
Compute Capability #.#a: A small and highly specialized set of features that are introduced to accelerate specialized operations, which are not guaranteed to be available or might change significantly on subsequent compute architecture. These features are summarized in the respective “Compute Capability #.#”” subsection.
Compilation of device code targets a particular compute capability. A feature which appears in device code must be available for the targeted compute capability. For example:
The
compute_90compilation target allows use of Compute Capability 9.0 features but does not allow use of Compute Capability 9.0a features.The
compute_90acompilation target allows use of the complete set of compute device features, both 9.0a features and 9.0 features.
16.2. Features and Technical Specifications
Feature Support |
Compute Capability |
|||||
|---|---|---|---|---|---|---|
(Unlisted features are supported for all compute capabilities) |
5.0, 5.2 |
5.3 |
6.x |
7.x |
8.x |
9.0 |
Atomic functions operating on 32-bit integer values in global memory (Atomic Functions) |
Yes |
|||||
Atomic functions operating on 32-bit integer values in shared memory (Atomic Functions) |
Yes |
|||||
Atomic functions operating on 64-bit integer values in global memory (Atomic Functions) |
Yes |
|||||
Atomic functions operating on 64-bit integer values in shared memory (Atomic Functions) |
Yes |
|||||
Atomic functions operating on 128-bit integer values in global memory (Atomic Functions) |
No |
Yes |
||||
Atomic functions operating on 128-bit integer values in shared memory (Atomic Functions) |
No |
Yes |
||||
Atomic addition operating on 32-bit floating point values in global and shared memory (atomicAdd()) |
Yes |
|||||
Atomic addition operating on 64-bit floating point values in global memory and shared memory (atomicAdd()) |
No |
Yes |
||||
Atomic addition operating on float2 and float4 floating point vectors in global memory (atomicAdd()) |
No |
Yes |
||||
Warp vote functions (Warp Vote Functions) |
Yes |
|||||
Memory fence functions (Memory Fence Functions) |
Yes |
|||||
Synchronization functions (Synchronization Functions) |
Yes |
|||||
Surface functions (Surface Functions) |
Yes |
|||||
Unified Memory Programming (Unified Memory Programming) |
Yes |
|||||
Dynamic Parallelism (CUDA Dynamic Parallelism) |
Yes |
|||||
Half-precision floating-point operations: addition, subtraction, multiplication, comparison, warp shuffle functions, conversion |
No |
Yes |
||||
Bfloat16-precision floating-point operations: addition, subtraction, multiplication, comparison, warp shuffle functions, conversion |
No |
Yes |
||||
Tensor Cores |
No |
Yes |
||||
Mixed Precision Warp-Matrix Functions (Warp Matrix Functions) |
No |
Yes |
||||
Hardware-accelerated |
No |
Yes |
||||
Hardware-accelerated Split Arrive/Wait Barrier (Asynchronous Barrier) |
No |
Yes |
||||
L2 Cache Residency Management (Device Memory L2 Access Management) |
No |
Yes |
||||
DPX Instructions for Accelerated Dynamic Programming |
No |
Yes |
||||
Distributed Shared Memory |
No |
Yes |
||||
Thread Block Cluster |
No |
Yes |
||||
Tensor Memory Accelerator (TMA) unit |
No |
Yes |
||||
Note that the KB and K units used in the following table correspond to 1024 bytes (i.e., a KiB) and 1024 respectively.
Compute Capability |
||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Technical Specifications |
5.0 |
5.2 |
5.3 |
6.0 |
6.1 |
6.2 |
7.0 |
7.2 |
7.5 |
8.0 |
8.6 |
8.7 |
8.9 |
9.0 |
Maximum number of resident grids per device (Concurrent Kernel Execution) |
32 |
16 |
128 |
32 |
16 |
128 |
16 |
128 |
||||||
Maximum dimensionality of grid of thread blocks |
3 |
|||||||||||||
Maximum x -dimension of a grid of thread blocks [thread blocks] |
231-1 |
|||||||||||||
Maximum y- or z-dimension of a grid of thread blocks |
65535 |
|||||||||||||
Maximum dimensionality of thread block |
3 |
|||||||||||||
Maximum x- or y-dimensionality of a block |
1024 |
|||||||||||||
Maximum z-dimension of a block |
64 |
|||||||||||||
Maximum number of threads per block |
1024 |
|||||||||||||
Warp size |
32 |
|||||||||||||
Maximum number of resident blocks per SM |
32 |
16 |
32 |
16 |
24 |
32 |
||||||||
Maximum number of resident warps per SM |
64 |
32 |
64 |
48 |
64 |
|||||||||
Maximum number of resident threads per SM |
2048 |
1024 |
2048 |
1536 |
2048 |
|||||||||
Number of 32-bit registers per SM |
64 K |
|||||||||||||
Maximum number of 32-bit registers per thread block |
64 K |
32 K |
64 K |
32 K |
64 K |
|||||||||
Maximum number of 32-bit registers per thread |
255 |
|||||||||||||
Maximum amount of shared memory per SM |
64 KB |
96 KB |
64 KB |
96 KB |
64 KB |
96 KB |
64 KB |
164 KB |
100 KB |
164 KB |
100 KB |
228 KB |
||
Maximum amount of shared memory per thread block 32 |
48 KB |
96 KB |
96 KB |
64 KB |
163 KB |
99 KB |
163 KB |
99 KB |
227 KB |
|||||
Number of shared memory banks |
32 |
|||||||||||||
Maximum amount of local memory per thread |
512 KB |
|||||||||||||
Constant memory size |
64 KB |
|||||||||||||
Cache working set per SM for constant memory |
8 KB |
4 KB |
8 KB |
|||||||||||
Cache working set per SM for texture memory |
Between 12 KB and 48 KB |
Between 24 KB and 48 KB |
32 ~ 128 KB |
32 or 64 KB |
28 KB ~ 192 KB |
28 KB ~ 128 KB |
28 KB ~ 192 KB |
28 KB ~ 128 KB |
28 KB ~ 256 KB |
|||||
Maximum width for a 1D texture object using a CUDA array |
65536 |
131072 |
||||||||||||
Maximum width for a 1D texture object using linear memory |
227 |
228 |
227 |
228 |
227 |
228 |
||||||||
Maximum width and number of layers for a 1D layered texture object |
16384 x 2048 |
32768 x 2048 |
||||||||||||
Maximum width and height for a 2D texture object using a CUDA array |
65536 x 65536 |
131072 x 65536 |
||||||||||||
Maximum width and height for a 2D texture object using linear memory |
65536 x 65536 |
131072 x 65000 |
||||||||||||
Maximum width and height for a 2D texture object using a CUDA array supporting texture gather |
16384 x 16384 |
32768 x 32768 |
||||||||||||
Maximum width, height, and number of layers for a 2D layered texture object |
16384 x 16384 x 2048 |
32768 x 32768 x 2048 |
||||||||||||
Maximum width, height, and depth for a 3D texture object using to a CUDA array |
4096 x 4096 x 4096 |
16384 x 16384 x 16384 |
||||||||||||
Maximum width (and height) for a cubemap texture object |
16384 |
32768 |
||||||||||||
Maximum width (and height) and number of layers for a cubemap layered texture object |
16384 x 2046 |
32768 x 2046 |
||||||||||||
Maximum number of textures that can be bound to a kernel |
256 |
|||||||||||||
Maximum width for a 1D surface object using a CUDA array |
16384 |
32768 |
||||||||||||
Maximum width and number of layers for a 1D layered surface object |
16384 x 2048 |
32768 x 2048 |
||||||||||||
Maximum width and height for a 2D surface object using a CUDA array |
65536 x 65536 |
1 31072 x 65536 |
||||||||||||
Maximum width, height, and number of layers for a 2D layered surface object |
16384 x 16384 x 2048 |
32768 x 32768 x 1048 |
||||||||||||
Maximum width, height, and depth for a 3D surface object using a CUDA array |
4096 x 4096 x 4096 |
16384 x 16384 x 16384 |
||||||||||||
Maximum width (and height) for a cubemap surface object using a CUDA array |
16384 |
32768 |
||||||||||||
Maximum width (and height) and number of layers for a cubemap layered surface object |
16384 x 2046 |
32768 x 2046 |
||||||||||||
Maximum number of surfaces that can use a kernel |
16 |
32 |
||||||||||||
16.3. Floating-Point Standard
All compute devices follow the IEEE 754-2008 standard for binary floating-point arithmetic with the following deviations:
There is no dynamically configurable rounding mode; however, most of the operations support multiple IEEE rounding modes, exposed via device intrinsics.
There is no mechanism for detecting that a floating-point exception has occurred and all operations behave as if the IEEE-754 exceptions are always masked, and deliver the masked response as defined by IEEE-754 if there is an exceptional event. For the same reason, while SNaN encodings are supported, they are not signaling and are handled as quiet.
The result of a single-precision floating-point operation involving one or more input NaNs is the quiet NaN of bit pattern 0x7fffffff.
Double-precision floating-point absolute value and negation are not compliant with IEEE-754 with respect to NaNs; these are passed through unchanged.
Code must be compiled with -ftz=false, -prec-div=true, and -prec-sqrt=true to ensure IEEE compliance (this is the default setting; see the nvcc user manual for description of these compilation flags).
Regardless of the setting of the compiler flag -ftz,
atomic single-precision floating-point adds on global memory always operate in flush-to-zero mode, i.e., behave equivalent to
FADD.F32.FTZ.RN,atomic single-precision floating-point adds on shared memory always operate with denormal support, i.e., behave equivalent to
FADD.F32.RN.
In accordance to the IEEE-754R standard, if one of the input parameters to fminf(), fmin(), fmaxf(), or fmax() is NaN, but not the other, the result is the non-NaN parameter.
The conversion of a floating-point value to an integer value in the case where the floating-point value falls outside the range of the integer format is left undefined by IEEE-754. For compute devices, the behavior is to clamp to the end of the supported range. This is unlike the x86 architecture behavior.
The behavior of integer division by zero and integer overflow is left undefined by IEEE-754. For compute devices, there is no mechanism for detecting that such integer operation exceptions have occurred. Integer division by zero yields an unspecified, machine-specific value.
https://developer.nvidia.com/content/precision-performance-floating-point-and-ieee-754-compliance-nvidia-gpus includes more information on the floating point accuracy and compliance of NVIDIA GPUs.
16.4. Compute Capability 5.x
16.4.1. Architecture
An SM consists of:
128 CUDA cores for arithmetic operations (see Arithmetic Instructions for throughputs of arithmetic operations),
32 special function units for single-precision floating-point transcendental functions,
4 warp schedulers.
When an SM is given warps to execute, it first distributes them among the four schedulers. Then, at every instruction issue time, each scheduler issues one instruction for one of its assigned warps that is ready to execute, if any.
An SM has:
a read-only constant cache that is shared by all functional units and speeds up reads from the constant memory space, which resides in device memory,
a unified L1/texture cache of 24 KB used to cache reads from global memory,
64 KB of shared memory for devices of compute capability 5.0 or 96 KB of shared memory for devices of compute capability 5.2.
The unified L1/texture cache is also used by the texture unit that implements the various addressing modes and data filtering mentioned in Texture and Surface Memory.
There is also an L2 cache shared by all SMs that is used to cache accesses to local or global memory, including temporary register spills. Applications may query the L2 cache size by checking the l2CacheSize device property (see Device Enumeration).
The cache behavior (e.g., whether reads are cached in both the unified L1/texture cache and L2 or in L2 only) can be partially configured on a per-access basis using modifiers to the load instruction.
16.4.2. Global Memory
Global memory accesses are always cached in L2.
Data that is read-only for the entire lifetime of the kernel can also be cached in the unified L1/texture cache described in the previous section by reading it using the __ldg() function (see Read-Only Data Cache Load Function). When the compiler detects that the read-only condition is satisfied for some data, it will use __ldg() to read it. The compiler might not always be able to detect that the read-only condition is satisfied for some data. Marking pointers used for loading such data with both the const and __restrict__ qualifiers increases the likelihood that the compiler will detect the read-only condition.
Data that is not read-only for the entire lifetime of the kernel cannot be cached in the unified L1/texture cache for devices of compute capability 5.0. For devices of compute capability 5.2, it is, by default, not cached in the unified L1/texture cache, but caching may be enabled using the following mechanisms:
Perform the read using inline assembly with the appropriate modifier as described in the PTX reference manual;
Compile with the
-Xptxas -dlcm=cacompilation flag, in which case all reads are cached, except reads that are performed using inline assembly with a modifier that disables caching;Compile with the
-Xptxas -fscm=cacompilation flag, in which case all reads are cached, including reads that are performed using inline assembly regardless of the modifier used.
When caching is enabled using one of the three mechanisms listed above, devices of compute capability 5.2 will cache global memory reads in the unified L1/texture cache for all kernel launches except for the kernel launches for which thread blocks consume too much of the SM’s register file. These exceptions are reported by the profiler.
16.4.3. Shared Memory
Shared memory has 32 banks that are organized such that successive 32-bit words map to successive banks. Each bank has a bandwidth of 32 bits per clock cycle.
A shared memory request for a warp does not generate a bank conflict between two threads that access any address within the same 32-bit word (even though the two addresses fall in the same bank). In that case, for read accesses, the word is broadcast to the requesting threads and for write accesses, each address is written by only one of the threads (which thread performs the write is undefined).
Figure 22 shows some examples of strided access.
Figure 23 shows some examples of memory read accesses that involve the broadcast mechanism.
Figure 35 Strided Shared Memory Accesses in 32 bit bank size mode.
- Left
-
Linear addressing with a stride of one 32-bit word (no bank conflict).
- Middle
-
Linear addressing with a stride of two 32-bit words (two-way bank conflict).
- Right
-
Linear addressing with a stride of three 32-bit words (no bank conflict).
Figure 36 Irregular Shared Memory Accesses.
- Left
-
Conflict-free access via random permutation.
- Middle
-
Conflict-free access since threads 3, 4, 6, 7, and 9 access the same word within bank 5.
- Right
-
Conflict-free broadcast access (threads access the same word within a bank).
16.5. Compute Capability 6.x
16.5.1. Architecture
An SM consists of:
64 (compute capability 6.0) or 128 (6.1 and 6.2) CUDA cores for arithmetic operations,
16 (6.0) or 32 (6.1 and 6.2) special function units for single-precision floating-point transcendental functions,
2 (6.0) or 4 (6.1 and 6.2) warp schedulers.
When an SM is given warps to execute, it first distributes them among its schedulers. Then, at every instruction issue time, each scheduler issues one instruction for one of its assigned warps that is ready to execute, if any.
An SM has:
a read-only constant cache that is shared by all functional units and speeds up reads from the constant memory space, which resides in device memory,
a unified L1/texture cache for reads from global memory of size 24 KB (6.0 and 6.2) or 48 KB (6.1),
a shared memory of size 64 KB (6.0 and 6.2) or 96 KB (6.1).
The unified L1/texture cache is also used by the texture unit that implements the various addressing modes and data filtering mentioned in Texture and Surface Memory.
There is also an L2 cache shared by all SMs that is used to cache accesses to local or global memory, including temporary register spills. Applications may query the L2 cache size by checking the l2CacheSize device property (see Device Enumeration).
The cache behavior (for example, whether reads are cached in both the unified L1/texture cache and L2 or in L2 only) can be partially configured on a per-access basis using modifiers to the load instruction.
16.5.2. Global Memory
Global memory behaves the same way as in devices of compute capability 5.x (See Global Memory).
16.6. Compute Capability 7.x
16.6.1. Architecture
An SM consists of:
64 FP32 cores for single-precision arithmetic operations,
32 FP64 cores for double-precision arithmetic operations,34
64 INT32 cores for integer math,
8 mixed-precision Tensor Cores for deep learning matrix arithmetic
16 special function units for single-precision floating-point transcendental functions,
4 warp schedulers.
An SM statically distributes its warps among its schedulers. Then, at every instruction issue time, each scheduler issues one instruction for one of its assigned warps that is ready to execute, if any.
An SM has:
a read-only constant cache that is shared by all functional units and speeds up reads from the constant memory space, which resides in device memory,
a unified data cache and shared memory with a total size of 128 KB (Volta) or 96 KB (Turing).
Shared memory is partitioned out of unified data cache, and can be configured to various sizes (See Shared Memory.) The remaining data cache serves as an L1 cache and is also used by the texture unit that implements the various addressing and data filtering modes mentioned in Texture and Surface Memory.
16.6.2. Independent Thread Scheduling
The Volta architecture introduces Independent Thread Scheduling among threads in a warp, enabling intra-warp synchronization patterns previously unavailable and simplifying code changes when porting CPU code. However, this can lead to a rather different set of threads participating in the executed code than intended if the developer made assumptions about warp-synchronicity of previous hardware architectures.
Below are code patterns of concern and suggested corrective actions for Volta-safe code.
For applications using warp intrinsics (
__shfl*,__any,__all,__ballot), it is necessary that developers port their code to the new, safe, synchronizing counterpart, with the*_syncsuffix. The new warp intrinsics take in a mask of threads that explicitly define which lanes (threads of a warp) must participate in the warp intrinsic. See Warp Vote Functions and Warp Shuffle Functions for details.
Since the intrinsics are available with CUDA 9.0+, (if necessary) code can be executed conditionally with the following preprocessor macro:
#if defined(CUDART_VERSION) && CUDART_VERSION >= 9000
// *_sync intrinsic
#endif
These intrinsics are available on all architectures, not just Volta or Turing, and in most cases a single code-base will suffice for all architectures. Note, however, that for Pascal and earlier architectures, all threads in mask must execute the same warp intrinsic instruction in convergence, and the union of all values in mask must be equal to the warp’s active mask. The following code pattern is valid on Volta, but not on Pascal or earlier architectures.
if (tid % warpSize < 16) { ... float swapped = __shfl_xor_sync(0xffffffff, val, 16); ... } else { ... float swapped = __shfl_xor_sync(0xffffffff, val, 16); ... }
The replacement for __ballot(1) is __activemask(). Note that threads within a warp can diverge even within a single code path. As a result, __activemask() and __ballot(1) may return only a subset of the threads on the current code path. The following invalid code example sets bit i of output to 1 when data[i] is greater than threshold. __activemask() is used in an attempt to enable cases where dataLen is not a multiple of 32.
// Sets bit in output[] to 1 if the correspond element in data[i] // is greater than 'threshold', using 32 threads in a warp. for (int i = warpLane; i < dataLen; i += warpSize) { unsigned active = __activemask(); unsigned bitPack = __ballot_sync(active, data[i] > threshold); if (warpLane == 0) { output[i / 32] = bitPack; } }
This code is invalid because CUDA does not guarantee that the warp will diverge ONLY at the loop condition. When divergence happens for other reasons, conflicting results will be computed for the same 32-bit output element by different subsets of threads in the warp. A correct code might use a non-divergent loop condition together with __ballot_sync() to safely enumerate the set of threads in the warp participating in the threshold calculation as follows.
for (int i = warpLane; i - warpLane < dataLen; i += warpSize) { unsigned active = __ballot_sync(0xFFFFFFFF, i < dataLen); if (i < dataLen) { unsigned bitPack = __ballot_sync(active, data[i] > threshold); if (warpLane == 0) { output[i / 32] = bitPack; } } }
Discovery Pattern demonstrates a valid use case for __activemask().
-
If applications have warp-synchronous codes, they will need to insert the new
__syncwarp()warp-wide barrier synchronization instruction between any steps where data is exchanged between threads via global or shared memory. Assumptions that code is executed in lockstep or that reads/writes from separate threads are visible across a warp without synchronization are invalid.__shared__ float s_buff[BLOCK_SIZE]; s_buff[tid] = val; __syncthreads(); // Inter-warp reduction for (int i = BLOCK_SIZE / 2; i >= 32; i /= 2) { if (tid < i) { s_buff[tid] += s_buff[tid+i]; } __syncthreads(); } // Intra-warp reduction // Butterfly reduction simplifies syncwarp mask if (tid < 32) { float temp; temp = s_buff[tid ^ 16]; __syncwarp(); s_buff[tid] += temp; __syncwarp(); temp = s_buff[tid ^ 8]; __syncwarp(); s_buff[tid] += temp; __syncwarp(); temp = s_buff[tid ^ 4]; __syncwarp(); s_buff[tid] += temp; __syncwarp(); temp = s_buff[tid ^ 2]; __syncwarp(); s_buff[tid] += temp; __syncwarp(); } if (tid == 0) { *output = s_buff[0] + s_buff[1]; } __syncthreads();
Although
__syncthreads()has been consistently documented as synchronizing all threads in the thread block, Pascal and prior architectures could only enforce synchronization at the warp level. In certain cases, this allowed a barrier to succeed without being executed by every thread as long as at least some thread in every warp reached the barrier. Starting with Volta, the CUDA built-in__syncthreads()and PTX instructionbar.sync(and their derivatives) are enforced per thread and thus will not succeed until reached by all non-exited threads in the block. Code exploiting the previous behavior will likely deadlock and must be modified to ensure that all non-exited threads reach the barrier.
The racecheck and synccheck tools provided by compute-saniter can help with locating violations.
To aid migration while implementing the above-mentioned corrective actions, developers can opt-in to the Pascal scheduling model that does not support independent thread scheduling. See Application Compatibility for details.
16.6.3. Global Memory
Global memory behaves the same way as in devices of compute capability 5.x (See Global Memory).
16.7. Compute Capability 8.x
16.7.1. Architecture
A Streaming Multiprocessor (SM) consists of:
64 FP32 cores for single-precision arithmetic operations in devices of compute capability 8.0 and 128 FP32 cores in devices of compute capability 8.6, 8.7 and 8.9,
32 FP64 cores for double-precision arithmetic operations in devices of compute capability 8.0 and 2 FP64 cores in devices of compute capability 8.6, 8.7 and 8.9
64 INT32 cores for integer math,
4 mixed-precision Third-Generation Tensor Cores supporting half-precision (fp16),
__nv_bfloat16,tf32, sub-byte and double precision (fp64) matrix arithmetic for compute capabilities 8.0, 8.6 and 8.7 (see Warp Matrix Functions for details),4 mixed-precision Fourth-Generation Tensor Cores supporting
fp8,fp16,__nv_bfloat16,tf32, sub-byte andfp64for compute capability 8.9 (see Warp Matrix Functions for details),16 special function units for single-precision floating-point transcendental functions,
4 warp schedulers.
An SM statically distributes its warps among its schedulers. Then, at every instruction issue time, each scheduler issues one instruction for one of its assigned warps that is ready to execute, if any.
An SM has:
a read-only constant cache that is shared by all functional units and speeds up reads from the constant memory space, which resides in device memory,
a unified data cache and shared memory with a total size of 192 KB for devices of compute capability 8.0 and 8.7 (1.5x Volta’s 128 KB capacity) and 128 KB for devices of compute capabilities 8.6 and 8.9.
Shared memory is partitioned out of the unified data cache, and can be configured to various sizes (see Shared Memory). The remaining data cache serves as an L1 cache and is also used by the texture unit that implements the various addressing and data filtering modes mentioned in Texture and Surface Memory.
16.7.2. Global Memory
Global memory behaves the same way as for devices of compute capability 5.x (See Global Memory).
16.8. Compute Capability 9.0
16.8.1. Architecture
A Streaming Multiprocessor (SM) consists of:
128 FP32 cores for single-precision arithmetic operations,
64 FP64 cores for double-precision arithmetic operations,
64 INT32 cores for integer math,
4 mixed-precision fourth-generation Tensor Cores supporting the new
FP8input type in eitherE4M3orE5M2for exponent (E) and mantissa (M), half-precision (fp16),__nv_bfloat16,tf32, INT8 and double precision (fp64) matrix arithmetic (see Warp Matrix Functions for details) with sparsity support,16 special function units for single-precision floating-point transcendental functions,
4 warp schedulers.
An SM statically distributes its warps among its schedulers. Then, at every instruction issue time, each scheduler issues one instruction for one of its assigned warps that is ready to execute, if any.
An SM has:
a read-only constant cache that is shared by all functional units and speeds up reads from the constant memory space, which resides in device memory,
a unified data cache and shared memory with a total size of 256 KB for devices of compute capability 9.0 (1.33x NVIDIA Ampere GPU Architecture’s 192 KB capacity).
Shared memory is partitioned out of the unified data cache, and can be configured to various sizes (see Shared Memory). The remaining data cache serves as an L1 cache and is also used by the texture unit that implements the various addressing and data filtering modes mentioned in Texture and Surface Memory.
16.8.2. Global Memory
Global memory behaves the same way as for devices of compute capability 5.x (See Global Memory).
16.8.4. Features Accelerating Specialized Computations
The NVIDIA Hopper GPU architecture includes features to accelerate matrix multiply-accumulate (MMA) computations with:
asynchronous execution of MMA instructions
MMA instructions acting on large matrices spanning a warp-group
dynamic reassignment of register capacity among warp-groups to support even larger matrices, and
operand matrices accessed directly from shared memory
This feature set is only available within the CUDA compilation toolchain through inline PTX.
It is strongly recommended that applications utilize this complex feature set through CUDA-X libraries such as cuBLAS, cuDNN, or cuFFT.
It is strongly recommended that device kernels utilize this complex feature set through CUTLASS, a collection of CUDA C++ template abstractions for implementing high-performance matrix-multiplication (GEMM) and related computations at all levels and scales within CUDA.
17. Driver API
This section assumes knowledge of the concepts described in CUDA Runtime.
The driver API is implemented in the cuda dynamic library (cuda.dll or cuda.so) which is copied on the system during the installation of the device driver. All its entry points are prefixed with cu.
It is a handle-based, imperative API: Most objects are referenced by opaque handles that may be specified to functions to manipulate the objects.
The objects available in the driver API are summarized in Table 22.
Object |
Handle |
Description |
|---|---|---|
Device |
CUdevice |
CUDA-enabled device |
Context |
CUcontext |
Roughly equivalent to a CPU process |
Module |
CUmodule |
Roughly equivalent to a dynamic library |
Function |
CUfunction |
Kernel |
Heap memory |
CUdeviceptr |
Pointer to device memory |
CUDA array |
CUarray |
Opaque container for one-dimensional or two-dimensional data on the device, readable via texture or surface references |
Texture object |
CUtexref |
Object that describes how to interpret texture memory data |
Surface reference |
CUsurfref |
Object that describes how to read or write CUDA arrays |
Stream |
CUstream |
Object that describes a CUDA stream |
Event |
CUevent |
Object that describes a CUDA event |
The driver API must be initialized with cuInit() before any function from the driver API is called. A CUDA context must then be created that is attached to a specific device and made current to the calling host thread as detailed in Context.
Within a CUDA context, kernels are explicitly loaded as PTX or binary objects by the host code as described in Module. Kernels written in C++ must therefore be compiled separately into PTX or binary objects. Kernels are launched using API entry points as described in Kernel Execution.
Any application that wants to run on future device architectures must load PTX, not binary code. This is because binary code is architecture-specific and therefore incompatible with future architectures, whereas PTX code is compiled to binary code at load time by the device driver.
Here is the host code of the sample from Kernels written using the driver API:
int main()
{
int N = ...;
size_t size = N * sizeof(float);
// Allocate input vectors h_A and h_B in host memory
float* h_A = (float*)malloc(size);
float* h_B = (float*)malloc(size);
// Initialize input vectors
...
// Initialize
cuInit(0);
// Get number of devices supporting CUDA
int deviceCount = 0;
cuDeviceGetCount(&deviceCount);
if (deviceCount == 0) {
printf("There is no device supporting CUDA.\n");
exit (0);
}
// Get handle for device 0
CUdevice cuDevice;
cuDeviceGet(&cuDevice, 0);
// Create context
CUcontext cuContext;
cuCtxCreate(&cuContext, 0, cuDevice);
// Create module from binary file
CUmodule cuModule;
cuModuleLoad(&cuModule, "VecAdd.ptx");
// Allocate vectors in device memory
CUdeviceptr d_A;
cuMemAlloc(&d_A, size);
CUdeviceptr d_B;
cuMemAlloc(&d_B, size);
CUdeviceptr d_C;
cuMemAlloc(&d_C, size);
// Copy vectors from host memory to device memory
cuMemcpyHtoD(d_A, h_A, size);
cuMemcpyHtoD(d_B, h_B, size);
// Get function handle from module
CUfunction vecAdd;
cuModuleGetFunction(&vecAdd, cuModule, "VecAdd");
// Invoke kernel
int threadsPerBlock = 256;
int blocksPerGrid =
(N + threadsPerBlock - 1) / threadsPerBlock;
void* args[] = { &d_A, &d_B, &d_C, &N };
cuLaunchKernel(vecAdd,
blocksPerGrid, 1, 1, threadsPerBlock, 1, 1,
0, 0, args, 0);
...
}
Full code can be found in the vectorAddDrv CUDA sample.
17.1. Context
A CUDA context is analogous to a CPU process. All resources and actions performed within the driver API are encapsulated inside a CUDA context, and the system automatically cleans up these resources when the context is destroyed. Besides objects such as modules and texture or surface references, each context has its own distinct address space. As a result, CUdeviceptr values from different contexts reference different memory locations.
A host thread may have only one device context current at a time. When a context is created with cuCtxCreate(), it is made current to the calling host thread. CUDA functions that operate in a context (most functions that do not involve device enumeration or context management) will return CUDA_ERROR_INVALID_CONTEXT if a valid context is not current to the thread.
Each host thread has a stack of current contexts. cuCtxCreate() pushes the new context onto the top of the stack. cuCtxPopCurrent() may be called to detach the context from the host thread. The context is then “floating” and may be pushed as the current context for any host thread. cuCtxPopCurrent() also restores the previous current context, if any.
A usage count is also maintained for each context. cuCtxCreate() creates a context with a usage count of 1. cuCtxAttach() increments the usage count and cuCtxDetach() decrements it. A context is destroyed when the usage count goes to 0 when calling cuCtxDetach() or cuCtxDestroy().
The driver API is interoperable with the runtime and it is possible to access the primary context (see Initialization) managed by the runtime from the driver API via cuDevicePrimaryCtxRetain().
Usage count facilitates interoperability between third party authored code operating in the same context. For example, if three libraries are loaded to use the same context, each library would call cuCtxAttach() to increment the usage count and cuCtxDetach() to decrement the usage count when the library is done using the context. For most libraries, it is expected that the application will have created a context before loading or initializing the library; that way, the application can create the context using its own heuristics, and the library simply operates on the context handed to it. Libraries that wish to create their own contexts - unbeknownst to their API clients who may or may not have created contexts of their own - would use cuCtxPushCurrent() and cuCtxPopCurrent() as illustrated in the following figure.
Figure 37 Library Context Management
17.2. Module
Modules are dynamically loadable packages of device code and data, akin to DLLs in Windows, that are output by nvcc (see Compilation with NVCC). The names for all symbols, including functions, global variables, and texture or surface references, are maintained at module scope so that modules written by independent third parties may interoperate in the same CUDA context.
This code sample loads a module and retrieves a handle to some kernel:
CUmodule cuModule;
cuModuleLoad(&cuModule, "myModule.ptx");
CUfunction myKernel;
cuModuleGetFunction(&myKernel, cuModule, "MyKernel");
This code sample compiles and loads a new module from PTX code and parses compilation errors:
#define BUFFER_SIZE 8192
CUmodule cuModule;
CUjit_option options[3];
void* values[3];
char* PTXCode = "some PTX code";
char error_log[BUFFER_SIZE];
int err;
options[0] = CU_JIT_ERROR_LOG_BUFFER;
values[0] = (void*)error_log;
options[1] = CU_JIT_ERROR_LOG_BUFFER_SIZE_BYTES;
values[1] = (void*)BUFFER_SIZE;
options[2] = CU_JIT_TARGET_FROM_CUCONTEXT;
values[2] = 0;
err = cuModuleLoadDataEx(&cuModule, PTXCode, 3, options, values);
if (err != CUDA_SUCCESS)
printf("Link error:\n%s\n", error_log);
This code sample compiles, links, and loads a new module from multiple PTX codes and parses link and compilation errors:
#define BUFFER_SIZE 8192
CUmodule cuModule;
CUjit_option options[6];
void* values[6];
float walltime;
char error_log[BUFFER_SIZE], info_log[BUFFER_SIZE];
char* PTXCode0 = "some PTX code";
char* PTXCode1 = "some other PTX code";
CUlinkState linkState;
int err;
void* cubin;
size_t cubinSize;
options[0] = CU_JIT_WALL_TIME;
values[0] = (void*)&walltime;
options[1] = CU_JIT_INFO_LOG_BUFFER;
values[1] = (void*)info_log;
options[2] = CU_JIT_INFO_LOG_BUFFER_SIZE_BYTES;
values[2] = (void*)BUFFER_SIZE;
options[3] = CU_JIT_ERROR_LOG_BUFFER;
values[3] = (void*)error_log;
options[4] = CU_JIT_ERROR_LOG_BUFFER_SIZE_BYTES;
values[4] = (void*)BUFFER_SIZE;
options[5] = CU_JIT_LOG_VERBOSE;
values[5] = (void*)1;
cuLinkCreate(6, options, values, &linkState);
err = cuLinkAddData(linkState, CU_JIT_INPUT_PTX,
(void*)PTXCode0, strlen(PTXCode0) + 1, 0, 0, 0, 0);
if (err != CUDA_SUCCESS)
printf("Link error:\n%s\n", error_log);
err = cuLinkAddData(linkState, CU_JIT_INPUT_PTX,
(void*)PTXCode1, strlen(PTXCode1) + 1, 0, 0, 0, 0);
if (err != CUDA_SUCCESS)
printf("Link error:\n%s\n", error_log);
cuLinkComplete(linkState, &cubin, &cubinSize);
printf("Link completed in %fms. Linker Output:\n%s\n", walltime, info_log);
cuModuleLoadData(cuModule, cubin);
cuLinkDestroy(linkState);
Full code can be found in the ptxjit CUDA sample.
17.3. Kernel Execution
cuLaunchKernel() launches a kernel with a given execution configuration.
Parameters are passed either as an array of pointers (next to last parameter of cuLaunchKernel()) where the nth pointer corresponds to the nth parameter and points to a region of memory from which the parameter is copied, or as one of the extra options (last parameter of cuLaunchKernel()).
When parameters are passed as an extra option (the CU_LAUNCH_PARAM_BUFFER_POINTER option), they are passed as a pointer to a single buffer where parameters are assumed to be properly offset with respect to each other by matching the alignment requirement for each parameter type in device code.
Alignment requirements in device code for the built-in vector types are listed in Table 5. For all other basic types, the alignment requirement in device code matches the alignment requirement in host code and can therefore be obtained using __alignof(). The only exception is when the host compiler aligns double and long long (and long on a 64-bit system) on a one-word boundary instead of a two-word boundary (for example, using gcc’s compilation flag -mno-align-double) since in device code these types are always aligned on a two-word boundary.
CUdeviceptr is an integer, but represents a pointer, so its alignment requirement is __alignof(void*).
The following code sample uses a macro (ALIGN_UP()) to adjust the offset of each parameter to meet its alignment requirement and another macro (ADD_TO_PARAM_BUFFER()) to add each parameter to the parameter buffer passed to the CU_LAUNCH_PARAM_BUFFER_POINTER option.
#define ALIGN_UP(offset, alignment) \
(offset) = ((offset) + (alignment) - 1) & ~((alignment) - 1)
char paramBuffer[1024];
size_t paramBufferSize = 0;
#define ADD_TO_PARAM_BUFFER(value, alignment) \
do { \
paramBufferSize = ALIGN_UP(paramBufferSize, alignment); \
memcpy(paramBuffer + paramBufferSize, \
&(value), sizeof(value)); \
paramBufferSize += sizeof(value); \
} while (0)
int i;
ADD_TO_PARAM_BUFFER(i, __alignof(i));
float4 f4;
ADD_TO_PARAM_BUFFER(f4, 16); // float4's alignment is 16
char c;
ADD_TO_PARAM_BUFFER(c, __alignof(c));
float f;
ADD_TO_PARAM_BUFFER(f, __alignof(f));
CUdeviceptr devPtr;
ADD_TO_PARAM_BUFFER(devPtr, __alignof(devPtr));
float2 f2;
ADD_TO_PARAM_BUFFER(f2, 8); // float2's alignment is 8
void* extra[] = {
CU_LAUNCH_PARAM_BUFFER_POINTER, paramBuffer,
CU_LAUNCH_PARAM_BUFFER_SIZE, ¶mBufferSize,
CU_LAUNCH_PARAM_END
};
cuLaunchKernel(cuFunction,
blockWidth, blockHeight, blockDepth,
gridWidth, gridHeight, gridDepth,
0, 0, 0, extra);
The alignment requirement of a structure is equal to the maximum of the alignment requirements of its fields. The alignment requirement of a structure that contains built-in vector types, CUdeviceptr, or non-aligned double and long long, might therefore differ between device code and host code. Such a structure might also be padded differently. The following structure, for example, is not padded at all in host code, but it is padded in device code with 12 bytes after field f since the alignment requirement for field f4 is 16.
typedef struct {
float f;
float4 f4;
} myStruct;
17.4. Interoperability between Runtime and Driver APIs
An application can mix runtime API code with driver API code.
If a context is created and made current via the driver API, subsequent runtime calls will pick up this context instead of creating a new one.
If the runtime is initialized (implicitly as mentioned in CUDA Runtime), cuCtxGetCurrent() can be used to retrieve the context created during initialization. This context can be used by subsequent driver API calls.
The implicitly created context from the runtime is called the primary context (see Initialization). It can be managed from the driver API with the Primary Context Management functions.
Device memory can be allocated and freed using either API. CUdeviceptr can be cast to regular pointers and vice-versa:
CUdeviceptr devPtr;
float* d_data;
// Allocation using driver API
cuMemAlloc(&devPtr, size);
d_data = (float*)devPtr;
// Allocation using runtime API
cudaMalloc(&d_data, size);
devPtr = (CUdeviceptr)d_data;
In particular, this means that applications written using the driver API can invoke libraries written using the runtime API (such as cuFFT, cuBLAS, …).
All functions from the device and version management sections of the reference manual can be used interchangeably.
17.5. Driver Entry Point Access
17.5.1. Introduction
The Driver Entry Point Access APIs provide a way to retrieve the address of a CUDA driver function. Starting from CUDA 11.3, users can call into available CUDA driver APIs using function pointers obtained from these APIs.
These APIs provide functionality similar to their counterparts, dlsym on POSIX platforms and GetProcAddress on Windows. The provided APIs will let users:
Retrieve the address of a driver function using the
CUDA Driver API.Retrieve the address of a driver function using the
CUDA Runtime API.Request per-thread default stream version of a CUDA driver function. For more details, see Retrieve Per-thread Default Stream Versions.
Access new CUDA features on older toolkits but with a newer driver.
17.5.2. Driver Function Typedefs
To help retrieve the CUDA Driver API entry points, the CUDA Toolkit provides access to headers containing the function pointer definitions for all CUDA driver APIs. These headers are installed with the CUDA Toolkit and are made available in the toolkit’s include/ directory. The table below summarizes the header files containing the typedefs for each CUDA API header file.
API header file |
API Typedef header file |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The above headers do not define actual function pointers themselves; they define the typedefs for function pointers. For example, cudaTypedefs.h has the below typedefs for the driver API cuMemAlloc:
typedef CUresult (CUDAAPI *PFN_cuMemAlloc_v3020)(CUdeviceptr_v2 *dptr, size_t bytesize);
typedef CUresult (CUDAAPI *PFN_cuMemAlloc_v2000)(CUdeviceptr_v1 *dptr, unsigned int bytesize);
CUDA driver symbols have a version based naming scheme with a _v* extension in its name except for the first version. When the signature or the semantics of a specific CUDA driver API changes, we increment the version number of the corresponding driver symbol. In the case of the cuMemAlloc driver API, the first driver symbol name is cuMemAlloc and the next symbol name is cuMemAlloc_v2. The typedef for the first version which was introduced in CUDA 2.0 (2000) is PFN_cuMemAlloc_v2000. The typedef for the next version which was introduced in CUDA 3.2 (3020) is PFN_cuMemAlloc_v3020.
The typedefs can be used to more easily define a function pointer of the appropriate type in code:
PFN_cuMemAlloc_v3020 pfn_cuMemAlloc_v2;
PFN_cuMemAlloc_v2000 pfn_cuMemAlloc_v1;
The above method is preferable if users are interested in a specific version of the API. Additionally, the headers have predefined macros for the latest version of all driver symbols that were available when the installed CUDA toolkit was released; these typedefs do not have a _v* suffix. For CUDA 11.3 toolkit, cuMemAlloc_v2 was the latest version and so we can also define its function pointer as below:
PFN_cuMemAlloc pfn_cuMemAlloc;
17.5.3. Driver Function Retrieval
Using the Driver Entry Point Access APIs and the appropriate typedef, we can get the function pointer to any CUDA driver API.
17.5.3.1. Using the Driver API
The driver API requires CUDA version as an argument to get the ABI compatible version for the requested driver symbol. CUDA Driver APIs have a per-function ABI denoted with a _v* extension. For example, consider the versions of cuStreamBeginCapture and their corresponding typedefs from cudaTypedefs.h:
// cuda.h
CUresult CUDAAPI cuStreamBeginCapture(CUstream hStream);
CUresult CUDAAPI cuStreamBeginCapture_v2(CUstream hStream, CUstreamCaptureMode mode);
// cudaTypedefs.h
typedef CUresult (CUDAAPI *PFN_cuStreamBeginCapture_v10000)(CUstream hStream);
typedef CUresult (CUDAAPI *PFN_cuStreamBeginCapture_v10010)(CUstream hStream, CUstreamCaptureMode mode);
From the above typedefs in the code snippet, version suffixes _v10000 and _v10010 indicate that the above APIs were introduced in CUDA 10.0 and CUDA 10.1 respectively.
#include <cudaTypedefs.h>
// Declare the entry points for cuStreamBeginCapture
PFN_cuStreamBeginCapture_v10000 pfn_cuStreamBeginCapture_v1;
PFN_cuStreamBeginCapture_v10010 pfn_cuStreamBeginCapture_v2;
// Get the function pointer to the cuStreamBeginCapture driver symbol
cuGetProcAddress("cuStreamBeginCapture", &pfn_cuStreamBeginCapture_v1, 10000, CU_GET_PROC_ADDRESS_DEFAULT, &driverStatus);
// Get the function pointer to the cuStreamBeginCapture_v2 driver symbol
cuGetProcAddress("cuStreamBeginCapture", &pfn_cuStreamBeginCapture_v2, 10010, CU_GET_PROC_ADDRESS_DEFAULT, &driverStatus);
Referring to the code snippet above, to retrieve the address to the _v1 version of the driver API cuStreamBeginCapture, the CUDA version argument should be exactly 10.0 (10000). Similarly, the CUDA version for retrieving the address to the _v2 version of the API should be 10.1 (10010). Specifying a higher CUDA version for retrieving a specific version of a driver API might not always be portable. For example, using 11030 here would still return the _v2 symbol, but if a hypothetical _v3 version is released in CUDA 11.3, the cuGetProcAddress API would start returning the newer _v3 symbol instead when paired with a CUDA 11.3 driver. Since the ABI and function signatures of the _v2 and _v3 symbols might differ, calling the _v3 function using the _v10010 typedef intended for the _v2 symbol would exhibit undefined behavior.
To retrieve the latest version of a driver API for a given CUDA Toolkit, we can also specify CUDA_VERSION as the version argument and use the unversioned typedef to define the function pointer. Since _v2 is the latest version of the driver API cuStreamBeginCapture in CUDA 11.3, the below code snippet shows a different method to retrieve it.
// Assuming we are using CUDA 11.3 Toolkit
#include <cudaTypedefs.h>
// Declare the entry point
PFN_cuStreamBeginCapture pfn_cuStreamBeginCapture_latest;
// Intialize the entry point. Specifying CUDA_VERSION will give the function pointer to the
// cuStreamBeginCapture_v2 symbol since it is latest version on CUDA 11.3.
cuGetProcAddress("cuStreamBeginCapture", &pfn_cuStreamBeginCapture_latest, CUDA_VERSION, CU_GET_PROC_ADDRESS_DEFAULT, &driverStatus);
Note that requesting a driver API with an invalid CUDA version will return an error CUDA_ERROR_NOT_FOUND. In the above code examples, passing in a version less than 10000 (CUDA 10.0) would be invalid.
17.5.3.2. Using the Runtime API
The runtime API cudaGetDriverEntryPoint uses the CUDA runtime version to get the ABI compatible version for the requested driver symbol. In the below code snippet, the minimum CUDA runtime version required would be CUDA 11.2 as cuMemAllocAsync was introduced then.
#include <cudaTypedefs.h>
// Declare the entry point
PFN_cuMemAllocAsync pfn_cuMemAllocAsync;
// Intialize the entry point. Assuming CUDA runtime version >= 11.2
cudaGetDriverEntryPoint("cuMemAllocAsync", &pfn_cuMemAllocAsync, cudaEnableDefault, &driverStatus);
// Call the entry point
if(driverStatus == cudaDriverEntryPointSuccess && pfn_cuMemAllocAsync) {
pfn_cuMemAllocAsync(...);
}
The runtime API cudaGetDriverEntryPointByVersion uses the user provided CUDA version to get the ABI compatible version for the requested driver symbol. This allows more specific control over the requested ABI version.
17.5.3.3. Retrieve Per-thread Default Stream Versions
Some CUDA driver APIs can be configured to have default stream or per-thread default stream semantics. Driver APIs having per-thread default stream semantics are suffixed with _ptsz or _ptds in their name. For example, cuLaunchKernel has a per-thread default stream variant named cuLaunchKernel_ptsz. With the Driver Entry Point Access APIs, users can request for the per-thread default stream version of the driver API cuLaunchKernel instead of the default stream version. Configuring the CUDA driver APIs for default stream or per-thread default stream semantics affects the synchronization behavior. More details can be found here.
The default stream or per-thread default stream versions of a driver API can be obtained by one of the following ways:
Use the compilation flag
--default-stream per-threador define the macroCUDA_API_PER_THREAD_DEFAULT_STREAMto get per-thread default stream behavior.Force default stream or per-thread default stream behavior using the flags
CU_GET_PROC_ADDRESS_LEGACY_STREAM/cudaEnableLegacyStreamorCU_GET_PROC_ADDRESS_PER_THREAD_DEFAULT_STREAM/cudaEnablePerThreadDefaultStreamrespectively.
17.5.3.4. Access New CUDA features
It is always recommended to install the latest CUDA toolkit to access new CUDA driver features, but if for some reason, a user does not want to update or does not have access to the latest toolkit, the API can be used to access new CUDA features with only an updated CUDA driver. For discussion, let us assume the user is on CUDA 11.3 and wants to use a new driver API cuFoo available in the CUDA 12.0 driver. The below code snippet illustrates this use-case:
int main()
{
// Assuming we have CUDA 12.0 driver installed.
// Manually define the prototype as cudaTypedefs.h in CUDA 11.3 does not have the cuFoo typedef
typedef CUresult (CUDAAPI *PFN_cuFoo)(...);
PFN_cuFoo pfn_cuFoo = NULL;
CUdriverProcAddressQueryResult driverStatus;
// Get the address for cuFoo API using cuGetProcAddress. Specify CUDA version as
// 12000 since cuFoo was introduced then or get the driver version dynamically
// using cuDriverGetVersion
int driverVersion;
cuDriverGetVersion(&driverVersion);
CUresult status = cuGetProcAddress("cuFoo", &pfn_cuFoo, driverVersion, CU_GET_PROC_ADDRESS_DEFAULT, &driverStatus);
if (status == CUDA_SUCCESS && pfn_cuFoo) {
pfn_cuFoo(...);
}
else {
printf("Cannot retrieve the address to cuFoo - driverStatus = %d. Check if the latest driver for CUDA 12.0 is installed.\n", driverStatus);
assert(0);
}
// rest of code here
}
17.5.4. Potential Implications with cuGetProcAddress
Below is a set of concrete and theoretical examples of potential issues with cuGetProcAddress and cudaGetDriverEntryPoint.
17.5.4.1. Implications with cuGetProcAddress vs Implicit Linking
cuDeviceGetUuid was introduced in CUDA 9.2. This API has a newer revision (cuDeviceGetUuid_v2) introduced in CUDA 11.4. To preserve minor version compatibility, cuDeviceGetUuid will not be version bumped to cuDeviceGetUuid_v2 in cuda.h until CUDA 12.0. This means that calling it by obtaining a function pointer to it via cuGetProcAddress might have different behavior. Example using the API directly:
#include <cuda.h>
CUuuid uuid;
CUdevice dev;
CUresult status;
status = cuDeviceGet(&dev, 0); // Get device 0
// handle status
status = cuDeviceGetUuid(&uuid, dev) // Get uuid of device 0
In this example, assume the user is compiling with CUDA 11.4. Note that this will perform the behavior of cuDeviceGetUuid, not _v2 version. Now an example of using cuGetProcAddress:
#include <cudaTypedefs.h>
CUuuid uuid;
CUdevice dev;
CUresult status;
CUdriverProcAddressQueryResult driverStatus;
status = cuDeviceGet(&dev, 0); // Get device 0
// handle status
PFN_cuDeviceGetUuid pfn_cuDeviceGetUuid;
status = cuGetProcAddress("cuDeviceGetUuid", &pfn_cuDeviceGetUuid, CUDA_VERSION, CU_GET_PROC_ADDRESS_DEFAULT, &driverStatus);
if(CUDA_SUCCESS == status && pfn_cuDeviceGetUuid) {
// pfn_cuDeviceGetUuid points to ???
}
In this example, assume the user is compiling with CUDA 11.4. This will get the function pointer of cuDeviceGetUuid_v2. Calling the function pointer will then invoke the new _v2 function, not the same cuDeviceGetUuid as shown in the previous example.
17.5.4.2. Compile Time vs Runtime Version Usage in cuGetProcAddress
Let’s take the same issue and make one small tweak. The last example used the compile time constant of CUDA_VERSION to determine which function pointer to obtain. More complications arise if the user queries the driver version dynamically using cuDriverGetVersion or cudaDriverGetVersion to pass to cuGetProcAddress. Example:
#include <cudaTypedefs.h>
CUuuid uuid;
CUdevice dev;
CUresult status;
int cudaVersion;
CUdriverProcAddressQueryResult driverStatus;
status = cuDeviceGet(&dev, 0); // Get device 0
// handle status
status = cuDriverGetVersion(&cudaVersion);
// handle status
PFN_cuDeviceGetUuid pfn_cuDeviceGetUuid;
status = cuGetProcAddress("cuDeviceGetUuid", &pfn_cuDeviceGetUuid, cudaVersion, CU_GET_PROC_ADDRESS_DEFAULT, &driverStatus);
if(CUDA_SUCCESS == status && pfn_cuDeviceGetUuid) {
// pfn_cuDeviceGetUuid points to ???
}
In this example, assume the user is compiling with CUDA 11.3. The user would debug, test, and deploy this application with the known behavior of getting cuDeviceGetUuid (not the _v2 version). Since CUDA has guaranteed ABI compatibility between minor versions, this same application is expected to run after the driver is upgraded to CUDA 11.4 (without updating the toolkit and runtime) without requiring recompilation. This will have undefined behavior though, because now the typedef for PFN_cuDeviceGetUuid will still be of the signature for the original version, but since cudaVersion would now be 11040 (CUDA 11.4), cuGetProcAddress would return the function pointer to the _v2 version, meaning calling it might have undefined behavior.
Note in this case the original (not the _v2 version) typedef looks like:
typedef CUresult (CUDAAPI *PFN_cuDeviceGetUuid_v9020)(CUuuid *uuid, CUdevice_v1 dev);
But the _v2 version typedef looks like:
typedef CUresult (CUDAAPI *PFN_cuDeviceGetUuid_v11040)(CUuuid *uuid, CUdevice_v1 dev);
So in this case, the API/ABI is going to be the same and the runtime API call will likely not cause issues–only the potential for unknown uuid return. In Implications to API/ABI, we discuss a more problematic case of API/ABI compatibility.
17.5.4.3. API Version Bumps with Explicit Version Checks
Above, was a specific concrete example. Now for instance let’s use a theoretical example that still has issues with compatibility across driver versions. Example:
CUresult cuFoo(int bar); // Introduced in CUDA 11.4
CUresult cuFoo_v2(int bar); // Introduced in CUDA 11.5
CUresult cuFoo_v3(int bar, void* jazz); // Introduced in CUDA 11.6
typedef CUresult (CUDAAPI *PFN_cuFoo_v11040)(int bar);
typedef CUresult (CUDAAPI *PFN_cuFoo_v11050)(int bar);
typedef CUresult (CUDAAPI *PFN_cuFoo_v11060)(int bar, void* jazz);
Notice that the API has been modified twice since original creation in CUDA 11.4 and the latest in CUDA 11.6 also modified the API/ABI interface to the function. The usage in user code compiled against CUDA 11.5 is:
#include <cuda.h>
#include <cudaTypedefs.h>
CUresult status;
int cudaVersion;
CUdriverProcAddressQueryResult driverStatus;
status = cuDriverGetVersion(&cudaVersion);
// handle status
PFN_cuFoo_v11040 pfn_cuFoo_v11040;
PFN_cuFoo_v11050 pfn_cuFoo_v11050;
if(cudaVersion < 11050 ) {
// We know to get the CUDA 11.4 version
status = cuGetProcAddress("cuFoo", &pfn_cuFoo_v11040, cudaVersion, CU_GET_PROC_ADDRESS_DEFAULT, &driverStatus);
// Handle status and validating pfn_cuFoo_v11040
}
else {
// Assume >= CUDA 11.5 version we can use the second version
status = cuGetProcAddress("cuFoo", &pfn_cuFoo_v11050, cudaVersion, CU_GET_PROC_ADDRESS_DEFAULT, &driverStatus);
// Handle status and validating pfn_cuFoo_v11050
}
In this example, without updates for the new typedef in CUDA 11.6 and recompiling the application with those new typedefs and case handling, the application will get the cuFoo_v3 function pointer returned and any usage of that function would then cause undefined behavior. The point of this example was to illustrate that even explicit version checks for cuGetProcAddress may not safely cover the minor version bumps within a CUDA major release.
17.5.4.4. Issues with Runtime API Usage
The above examples were focused on the issues with the Driver API usage for obtaining the function pointers to driver APIs. Now we will discuss the potential issues with the Runtime API usage for cudaApiGetDriverEntryPoint.
We will start by using the Runtime APIs similar to the above.
#include <cuda.h>
#include <cudaTypedefs.h>
#include <cuda_runtime.h>
CUresult status;
cudaError_t error;
int driverVersion, runtimeVersion;
CUdriverProcAddressQueryResult driverStatus;
// Ask the runtime for the function
PFN_cuDeviceGetUuid pfn_cuDeviceGetUuidRuntime;
error = cudaGetDriverEntryPoint ("cuDeviceGetUuid", &pfn_cuDeviceGetUuidRuntime, cudaEnableDefault, &driverStatus);
if(cudaSuccess == error && pfn_cuDeviceGetUuidRuntime) {
// pfn_cuDeviceGetUuid points to ???
}
The function pointer in this example is even more complicated than the driver only examples above because there is no control over which version of the function to obtain; it will always get the API for the current CUDA Runtime version. See the following table for more information:
Static Runtime Version Linkage |
||
|---|---|---|
Driver Version Installed |
V11.3 |
V11.4 |
V11.3 |
v1 |
v1x |
V11.4 |
v1 |
v2 |
V11.3 => 11.3 CUDA Runtime and Toolkit (includes header files cuda.h and cudaTypedefs.h)
V11.4 => 11.4 CUDA Runtime and Toolkit (includes header files cuda.h and cudaTypedefs.h)
v1 => cuDeviceGetUuid
v2 => cuDeviceGetUuid_v2
x => Implies the typedef function pointer won't match the returned
function pointer. In these cases, the typedef at compile time
using a CUDA 11.4 runtime, would match the _v2 version, but the
returned function pointer would be the original (non _v2) function.
The problem in the table comes in with a newer CUDA 11.4 Runtime and Toolkit and older driver (CUDA 11.3) combination, labeled as v1x in the above. This combination would have the driver returning the pointer to the older function (non _v2), but the typedef used in the application would be for the new function pointer.
17.5.4.5. Issues with Runtime API and Dynamic Versioning
More complications arise when we consider different combinations of the CUDA version with which an application is compiled, CUDA runtime version, and CUDA driver version that an application dynamically links against.
#include <cuda.h>
#include <cudaTypedefs.h>
#include <cuda_runtime.h>
CUresult status;
cudaError_t error;
int driverVersion, runtimeVersion;
CUdriverProcAddressQueryResult driverStatus;
enum cudaDriverEntryPointQueryResult runtimeStatus;
PFN_cuDeviceGetUuid pfn_cuDeviceGetUuidDriver;
status = cuGetProcAddress("cuDeviceGetUuid", &pfn_cuDeviceGetUuidDriver, CUDA_VERSION, CU_GET_PROC_ADDRESS_DEFAULT, &driverStatus);
if(CUDA_SUCCESS == status && pfn_cuDeviceGetUuidDriver) {
// pfn_cuDeviceGetUuidDriver points to ???
}
// Ask the runtime for the function
PFN_cuDeviceGetUuid pfn_cuDeviceGetUuidRuntime;
error = cudaGetDriverEntryPoint ("cuDeviceGetUuid", &pfn_cuDeviceGetUuidRuntime, cudaEnableDefault, &runtimeStatus);
if(cudaSuccess == error && pfn_cuDeviceGetUuidRuntime) {
// pfn_cuDeviceGetUuidRuntime points to ???
}
// Ask the driver for the function based on the driver version (obtained via runtime)
error = cudaDriverGetVersion(&driverVersion);
PFN_cuDeviceGetUuid pfn_cuDeviceGetUuidDriverDriverVer;
status = cuGetProcAddress ("cuDeviceGetUuid", &pfn_cuDeviceGetUuidDriverDriverVer, driverVersion, CU_GET_PROC_ADDRESS_DEFAULT, &driverStatus);
if(CUDA_SUCCESS == status && pfn_cuDeviceGetUuidDriverDriverVer) {
// pfn_cuDeviceGetUuidDriverDriverVer points to ???
}
The following matrix of function pointers is expected:
Function Pointer |
Application Compiled/Runtime Dynamic Linked Version/Driver Version |
|||||||
(3 => CUDA 11.3 and 4 => CUDA 11.4) |
||||||||
3/3/3 |
3/3/4 |
3/4/3 |
3/4/4 |
4/3/3 |
4/3/4 |
4/4/3 |
4/4/4 |
|
|
t1/v1 |
t1/v1 |
t1/v1 |
t1/v1 |
N/A |
N/A |
t2/v1 |
t2/v2 |
|
t1/v1 |
t1/v1 |
t1/v1 |
t1/v2 |
N/A |
N/A |
t2/v1 |
t2/v2 |
|
t1/v1 |
t1/v2 |
t1/v1 |
t1/v2 |
N/A |
N/A |
t2/v1 |
t2/v2 |
tX -> Typedef version used at compile time
vX -> Version returned/used at runtime
If the application is compiled against CUDA Version 11.3, it would have the typedef for the original function, but if compiled against CUDA Version 11.4, it would have the typedef for the _v2 function. Because of that, notice the number of cases where the typedef does not match the actual version returned/used.
17.5.4.6. Issues with Runtime API allowing CUDA Version
Unless specified otherwise, the CUDA runtime API cudaGetDriverEntryPointByVersion will have similar implications as the driver entry point cuGetProcAddress since it allows for the user to request a specific CUDA driver version.
17.5.4.7. Implications to API/ABI
In the above examples using cuDeviceGetUuid, the implications of the mismatched API are minimal, and may not be entirely noticeable to many users as the _v2 was added to support Multi-Instance GPU (MIG) mode. So, on a system without MIG, the user might not even realize they are getting a different API.
More problematic is an API which changes its application signature (and hence ABI) such as cuCtxCreate. The _v2 version, introduced in CUDA 3.2 is currently used as the default cuCtxCreate when using cuda.h but now has a newer version introduced in CUDA 11.4 (cuCtxCreate_v3). The API signature has been modified as well, and now takes extra arguments. So, in some of the cases above, where the typedef to the function pointer doesn’t match the returned function pointer, there is a chance for non-obvious ABI incompatibility which would lead to undefined behavior.
For example, assume the following code compiled against a CUDA 11.3 toolkit with a CUDA 11.4 driver installed:
PFN_cuCtxCreate cuUnknown;
CUdriverProcAddressQueryResult driverStatus;
status = cuGetProcAddress("cuCtxCreate", (void**)&cuUnknown, cudaVersion, CU_GET_PROC_ADDRESS_DEFAULT, &driverStatus);
if(CUDA_SUCCESS == status && cuUnknown) {
status = cuUnknown(&ctx, 0, dev);
}
Running this code where cudaVersion is set to anything >=11040 (indicating CUDA 11.4) could have undefined behavior due to not having adequately supplied all the parameters required for the _v3 version of the cuCtxCreate_v3 API.
17.5.5. Determining cuGetProcAddress Failure Reasons
There are two types of errors with cuGetProcAddress. Those are (1) API/usage errors and (2) inability to find the driver API requested. The first error type will return error codes from the API via the CUresult return value. Things like passing NULL as the pfn variable or passing invalid flags.
The second error type encodes in the CUdriverProcAddressQueryResult *symbolStatus and can be used to help distinguish potential issues with the driver not being able to find the symbol requested. Take the following example:
// cuDeviceGetExecAffinitySupport was introduced in release CUDA 11.4
#include <cuda.h>
CUdriverProcAddressQueryResult driverStatus;
cudaVersion = ...;
status = cuGetProcAddress("cuDeviceGetExecAffinitySupport", &pfn, cudaVersion, 0, &driverStatus);
if (CUDA_SUCCESS == status) {
if (CU_GET_PROC_ADDRESS_VERSION_NOT_SUFFICIENT == driverStatus) {
printf("We can use the new feature when you upgrade cudaVersion to 11.4, but CUDA driver is good to go!\n");
// Indicating cudaVersion was < 11.4 but run against a CUDA driver >= 11.4
}
else if (CU_GET_PROC_ADDRESS_SYMBOL_NOT_FOUND == driverStatus) {
printf("Please update both CUDA driver and cudaVersion to at least 11.4 to use the new feature!\n");
// Indicating driver is < 11.4 since string not found, doesn't matter what cudaVersion was
}
else if (CU_GET_PROC_ADDRESS_SUCCESS == driverStatus && pfn) {
printf("You're using cudaVersion and CUDA driver >= 11.4, using new feature!\n");
pfn();
}
}
The first case with the return code CU_GET_PROC_ADDRESS_VERSION_NOT_SUFFICIENT indicates that the symbol was found when searching in the CUDA driver but it was added later than the cudaVersion supplied. In the example, specifying cudaVersion as anything 11030 or less and when running against a CUDA driver >= CUDA 11.4 would give this result of CU_GET_PROC_ADDRESS_VERSION_NOT_SUFFICIENT. This is because cuDeviceGetExecAffinitySupport was added in CUDA 11.4 (11040).
The second case with the return code CU_GET_PROC_ADDRESS_SYMBOL_NOT_FOUND indicates that the symbol was not found when searching in the CUDA driver. This can be due to a few reasons such as unsupported CUDA function due to older driver as well as just having a typo. In the latter, similar to the last example if the user had put symbol as CUDeviceGetExecAffinitySupport - notice the capital CU to start the string - cuGetProcAddress would not be able to find the API because the string doesn’t match. In the former case an example might be the user developing an application against a CUDA driver supporting the new API, and deploying the application against an older CUDA driver. Using the last example, if the developer developed against CUDA 11.4 or later but was deployed against a CUDA 11.3 driver, during their development they may have had a succesful cuGetProcAddress, but when deploying an application running against a CUDA 11.3 driver the call would no longer work with the CU_GET_PROC_ADDRESS_SYMBOL_NOT_FOUND returned in driverStatus.
18. CUDA Environment Variables
The following table lists the CUDA environment variables. Environment variables related to the Multi-Process Service are documented in the Multi-Process Service section of the GPU Deployment and Management guide.
Variable |
Values |
Description |
|---|---|---|
Device Enumeration and Properties |
||
CUDA_VISIBLE_DEVICES |
A comma-separated sequence of GPU identifiers
MIG support: |
GPU identifiers are given as integer indices or as UUID strings. GPU UUID strings should follow the same format as given by nvidia-smi, such as GPU-8932f937-d72c-4106-c12f-20bd9faed9f6. However, for convenience, abbreviated forms are allowed; simply specify enough digits from the beginning of the GPU UUID to uniquely identify that GPU in the target system. For example, CUDA_VISIBLE_DEVICES=GPU-8932f937 may be a valid way to refer to the above GPU UUID, assuming no other GPU in the system shares this prefix. Only the devices whose index is present in the sequence are visible to CUDA applications and they are enumerated in the order of the sequence. If one of the indices is invalid, only the devices whose index precedes the invalid index are visible to CUDA applications. For example, setting CUDA_VISIBLE_DEVICES to 2,1 causes device 0 to be invisible and device 2 to be enumerated before device 1. Setting CUDA_VISIBLE_DEVICES to 0,2,-1,1 causes devices 0 and 2 to be visible and device 1 to be invisible. MIG format starts with MIG keyword and GPU UUID should follow the same format as given by nvidia-smi. For example, MIG-GPU-8932f937-d72c-4106-c12f-20bd9faed9f6/1/2. Only single MIG instance enumeration is supported. |
CUDA_MANAGED_FORCE_DEVICE_ALLOC |
0 or 1 (default is 0) |
Forces the driver to place all managed allocations in device memory. |
CUDA_DEVICE_ORDER |
FASTEST_FIRST, PCI_BUS_ID, (default is FASTEST_FIRST) |
FASTEST_FIRST causes CUDA to enumerate the available devices in fastest to slowest order using a simple heuristic. PCI_BUS_ID orders devices by PCI bus ID in ascending order. |
Compilation |
||
CUDA_CACHE_DISABLE |
0 or 1 (default is 0) |
Disables caching (when set to 1) or enables caching (when set to 0) for just-in-time-compilation. When disabled, no binary code is added to or retrieved from the cache. |
CUDA_CACHE_PATH |
filepath |
Specifies the folder where the just-in-time compiler caches binary codes; the default values are:
|
CUDA_CACHE_MAXSIZE |
integer (default is 1073741824 (1 GiB) for desktop/server platforms and 268435456 (256 MiB) for embedded platforms and the maximum is 4294967296 (4 GiB)) |
Specifies the size in bytes of the cache used by the just-in-time compiler. Binary codes whose size exceeds the cache size are not cached. Older binary codes are evicted from the cache to make room for newer binary codes if needed. |
CUDA_FORCE_PTX_JIT |
0 or 1 (default is 0) |
When set to 1, forces the device driver to ignore any binary code embedded in an application (see Application Compatibility) and to just-in-time compile embedded PTX code instead. If a kernel does not have embedded PTX code, it will fail to load. This environment variable can be used to validate that PTX code is embedded in an application and that its just-in-time compilation works as expected to guarantee application forward compatibility with future architectures (see Just-in-Time Compilation). |
CUDA_DISABLE_PTX_JIT |
0 or 1 (default is 0) |
When set to 1, disables the just-in-time compilation of embedded PTX code and use the compatible binary code embedded in an application (see Application Compatibility). If a kernel does not have embedded binary code or the embedded binary was compiled for an incompatible architecture, then it will fail to load. This environment variable can be used to validate that an application has the compatible SASS code generated for each kernel.(see Binary Compatibility). |
CUDA_FORCE_JIT |
0 or 1 (default is 0) |
When set to 1, forces the device driver to ignore any binary code embedded in an application (see Application Compatibility) and to just-in-time compile embedded PTX code instead. If a kernel does not have embedded PTX code, it will fail to load. This environment variable can be used to validate that PTX code is embedded in an application and that its just-in-time compilation works as expected to guarantee application forward compatibility with future architectures (see Just-in-Time Compilation). The behavior can be overridden for embedded PTX by setting |
CUDA_DISABLE_JIT |
0 or 1 (default is 0) |
When set to 1, disables the just-in-time compilation of embedded PTX code and use the compatible binary code embedded in an application (see Application Compatibility). If a kernel does not have embedded binary code or the embedded binary was compiled for an incompatible architecture, then it will fail to load. This environment variable can be used to validate that an application has the compatible SASS code generated for each kernel.(see Binary Compatibility). The behavior can be overridden for embedded PTX by setting |
Execution |
||
CUDA_LAUNCH_BLOCKING |
0 or 1 (default is 0) |
Disables (when set to 1) or enables (when set to 0) asynchronous kernel launches. |
CUDA_DEVICE_MAX_CONNECTIONS |
1 to 32 (default is 8) |
Sets the number of compute and copy engine concurrent connections (work queues) from the host to each device of compute capability 3.5 and above. |
CUDA_DEVICE_MAX_COPY_CONNECTIONS |
1 to 32 (default is 8) |
Sets the number of copy engine concurrent connections (work queues) per async copy engine from the host to each device of compute capability 8.0 and above. When both CUDA_DEVICE_MAX_CONNECTIONS and CUDA_DEVICE_MAX_COPY_CONNECTIONS are set, only the number of copy connections set by CUDA_DEVICE_MAX_CONNECTIONS will be overwritten. |
CUDA_AUTO_BOOST |
0 or 1 |
Overrides the autoboost behavior set by the –auto-boost-default option of nvidia-smi. If an application requests via this environment variable a behavior that is different from nvidia-smi’s, its request is honored if there is no other application currently running on the same GPU that successfully requested a different behavior, otherwise it is ignored. |
CUDA_SCALE_LAUNCH_QUEUES |
“0.25x”, “0.5x”, “2x” or “4x” |
Scales the size of the queues available for launching work by a fixed multiplier. |
cuda-gdb (on Linux platform) |
||
CUDA_DEVICE_WAITS_ON_EXCEPTION |
0 or 1 (default is 0) |
When set to 1, a CUDA application will halt when a device exception occurs, allowing a debugger to be attached for further debugging. |
MPS service (on Linux platform) |
||
CUDA_DEVICE_DEFAULT_PERSISTING_L2_CACHE_PERCENTAGE_LIMIT |
Percentage value (between 0 - 100, default is 0) |
Devices of compute capability 8.x allow, a portion of L2 cache to be set-aside for persisting data accesses to global memory. When using CUDA MPS service, the set-aside size can only be controlled using this environment variable, before starting CUDA MPS control daemon. I.e., the environment variable should be set before running the command |
Module loading |
||
CUDA_MODULE_LOADING |
DEFAULT, LAZY, EAGER (default is LAZY) |
Specifies the module loading mode for the application. When set to EAGER, all kernels and data from a cubin, fatbin or a PTX file are fully loaded upon corresponding |
CUDA_MODULE_DATA_LOADING |
DEFAULT, LAZY, EAGER (default is LAZY) |
Specifies the data loading mode for the application. When set to EAGER, all data from a cubin, fatbin or a PTX file are fully loaded to memory upon corresponding |
Pre-loading dependent libraries |
||
CUDA_FORCE_PRELOAD_LIBRARIES |
0 or 1 (default is 0) |
When set to 1, forces the driver to preload the libraries required for NVVM and PTX just-in-time compilation during driver initialization. This will increase the memory footprint and the time taken for CUDA driver initialization. This environment variable needs to be set to avoid certain deadlock situations involving multiple CUDA threads. |
CUDA Graphs |
||
CUDA_GRAPHS_USE_NODE_PRIORITY |
0 or 1 |
Overrides the cudaGraphInstantiateFlagUseNodePriority flag on graph instantiation. When set to 1, the flag will be set for all graphs and when set to 0, the flag will be cleared for all graphs. |
19. Unified Memory Programming
Note
This chapter applies to devices with compute capability 5.0 or higher unless stated otherwise. For devices with compute capability lower than 5.0, refer to the CUDA toolkit documentation for CUDA 11.8.
This documentation on Unified Memory is divided into 3 parts:
General description of unified memory :ref:`um-introduction
Unified Memory on devices with full CUDA Unified Memory support :ref:`um-pageable-systems
Unified Memory on devices without full CUDA Unified Memory support :ref:`um-no-pageable-systems
19.1. Unified Memory Introduction
CUDA Unified Memory provides all processors with:
a single unified memory pool, that is, a single pointer value enables all processors in the system (all CPUs, all GPUs, etc.) to access this memory with all of their native memory operations (pointer dereferenes, atomics, etc.).
concurrent access to the unified memory pool from all processors in the system.
Unified Memory improves GPU programming in several ways:
Producitivity: GPU programs may access Unified Memory from GPU and CPU threads concurrently without needing to create separate allocations (
cudaMalloc()) and copy memory manually back and forth (cudaMemcpy*()).-
Performance:
Data access speed may be maximized by migrating data towards processors that access it most frequently. Applications can trigger manual migration of data and may use hints to control migration heuristics.
Total system memory usage may be reduced by avoiding duplicating memory on both CPUs and GPUs.
Functionality: it enables GPU programs to work on data that exceeds the GPU memory’s capacity.
With CUDA Unified Memory, data movement still takes place, and hints may improve performance. These hints are not required for correctness or functionality, that is, programmers may focus on parallelizing their applications across GPUs and CPUs first, and worry about data-movement later in the development cycle as a performance optimzation. Note that the physical location of data is invisible to a program and may be changed at any time, but accesses to the data’s virtual address will remain valid and coherent from any processor regardless of locality.
There are two main ways to obtain CUDA Unified Memory:
System-Allocated Memory: memory allocated on the host with system APIs: stack variables, global-/file-scope variables,
malloc()/mmap()(see System-Allocated Memory: in-depth examples for in-depth examples), thread locals, etc.CUDA APIs that explicitly allocate Unified Memory: memory allocated with, for example,
cudaMallocManaged(), are available on more systems and may perform better than System-Allocated Memory.
19.1.1. System Requirements for Unified Memory
The following table shows the different levels of support for CUDA Unified Memory, the device properties required to detect these levels of support and links to the documentation specific to each level of support:
Unified Memory Support Level |
System device properties |
Further documentation |
|---|---|---|
Full CUDA Unified Memory: all memory has full support. This includes System-Allocated and CUDA Managed Memory. |
Set to 1:
pageableMemoryAccess
Systems with hardware acceleration also have the following properties set to 1:
hostNativeAtomicSupported, pageableMemoryAccessUsesHostPageTables, directManagedMemAccessFromHost
|
Unified Memory on devices with full CUDA Unified Memory support |
Only CUDA Managed Memory has full support. |
Set to 1:
concurrentManagedAccess
Set to 0:
pageableMemoryAccess
|
Unified Memory on devices with only CUDA Managed Memory support |
CUDA Managed Memory without full support: unified addressing but no concurrent access. |
Set to 1:
managedMemory
Set to 0:
concurrentManagedAccess
|
|
No Unified Memory support. |
Set to 0: |
The behavior of an application that attempts to use Unified Memory on a system that does not support it is undefined. The following properties enable CUDA applications to check the level of system support for Unified Memory, and to be portable between systems with different levels of support:
-
pageableMemoryAccess: This property is set to 1 on systems with CUDA Unified Memory support where all threads may access System-Allocated Memory and CUDA Managed Memory. These systems include NVIDIA Grace Hopper, IBM Power9 + Volta, and modern Linux systems with HMM enabled (see next bullet), among others.Linux HMM requires Linux kernel version 6.1.24+, 6.2.11+ or 6.3+, devices with compute capability 7.5 or higher and a CUDA driver version 535+ installed with Open Kernel Modules.
concurrentManagedAccess: This property is set to 1 on systems with full CUDA Managed Memory support. When this property is set to 0, there is only partial support for Unified Memory in CUDA Managed Memory. For Tegra support of Unified Memory, see CUDA for Tegra Memory Management.
A program may query the level of GPU support for CUDA Unified Memory, by querying the attributes in
Table Overview of levels of unified memory support above using cudaGetDeviceProperties().
19.1.2. Programming Model
With CUDA Unified Memory, separate allocations between host and device, and explicit memory transfers between them, are no longer required. Programs may allocate Unified Memory in the following ways:
System-Allocation APIs: on systems with full CUDA Unified Memory support via any system allocation of the host process (C’s
malloc(), C++’snewoperator, POSIX’smmapand so on).CUDA Managed Memory Allocation APIs: via the
cudaMallocManaged()API which is syntactically similar tocudaMalloc().CUDA Managed Variables: variables declared with
__managed__, which are semantically similar to a__device__variable.
Most examples in this chapter provide at least two versions, one using CUDA Managed Memory and one using System-Allocated Memory. Tabs allow you to choose between them. The following samples illustrate how Unified Memory simplifies CUDA programs:
__global__ void write_value(int* ptr, int v) {
*ptr = v;
}
int main() {
int* d_ptr = nullptr;
// Does not require any unified memory support
cudaMalloc(&d_ptr, sizeof(int));
write_value<<<1, 1>>>(d_ptr, 1);
int host;
// Copy memory back to the host and synchronize
cudaMemcpy(&host, d_ptr, sizeof(int),
cudaMemcpyDefault);
printf("value = %d\n", host);
cudaFree(d_ptr);
return 0;
}
|
__global__ void write_value(int* ptr, int v) {
*ptr = v;
}
int main() {
// Requires System-Allocated Memory support
int* ptr = (int*)malloc(sizeof(int));
write_value<<<1, 1>>>(ptr, 1);
// Synchronize required
// (before, cudaMemcpy was synchronizing)
cudaDeviceSynchronize();
printf("value = %d\n", *ptr);
free(ptr);
return 0;
}
|
__global__ void write_value(int* ptr, int v) {
*ptr = v;
}
int main() {
int* d_ptr = nullptr;
// Does not require any unified memory support
cudaMalloc(&d_ptr, sizeof(int));
write_value<<<1, 1>>>(d_ptr, 1);
int host;
// Copy memory back to the host and synchronize
cudaMemcpy(&host, d_ptr, sizeof(int),
cudaMemcpyDefault);
printf("value = %d\n", host);
cudaFree(d_ptr);
return 0;
}
|
__global__ void write_value(int* ptr, int v) {
*ptr = v;
}
int main() {
// Requires System-Allocated Memory support
int value;
write_value<<<1, 1>>>(&value, 1);
// Synchronize required
// (before, cudaMemcpy was synchronizing)
cudaDeviceSynchronize();
printf("value = %d\n", value);
return 0;
}
|
__global__ void write_value(int* ptr, int v) {
*ptr = v;
}
int main() {
int* d_ptr = nullptr;
// Does not require any unified memory support
cudaMalloc(&d_ptr, sizeof(int));
write_value<<<1, 1>>>(d_ptr, 1);
int host;
// Copy memory back to the host and synchronize
cudaMemcpy(&host, d_ptr, sizeof(int),
cudaMemcpyDefault);
printf("value = %d\n", host);
cudaFree(d_ptr);
return 0;
}
|
__global__ void write_value(int* ptr, int v) {
*ptr = v;
}
int main() {
int* ptr = nullptr;
// Requires CUDA Managed Memory support
cudaMallocManaged(&ptr, sizeof(int));
write_value<<<1, 1>>>(ptr, 1);
// Synchronize required
// (before, cudaMemcpy was synchronizing)
cudaDeviceSynchronize();
printf("value = %d\n", *ptr);
cudaFree(ptr);
return 0;
}
|
__global__ void write_value(int* ptr, int v) {
*ptr = v;
}
int main() {
int* d_ptr = nullptr;
// Does not require any unified memory support
cudaMalloc(&d_ptr, sizeof(int));
write_value<<<1, 1>>>(d_ptr, 1);
int host;
// Copy memory back to the host and synchronize
cudaMemcpy(&host, d_ptr, sizeof(int),
cudaMemcpyDefault);
printf("value = %d\n", host);
cudaFree(d_ptr);
return 0;
}
|
__global__ void write_value(int* ptr, int v) {
*ptr = v;
}
// Requires CUDA Managed Memory support
__managed__ int value;
int main() {
write_value<<<1, 1>>>(&value, 1);
// Synchronize required
// (before, cudaMemcpy was synchronizing)
cudaDeviceSynchronize();
printf("value = %d\n", value);
return 0;
}
|
These examples combine two numbers together on the GPU with a per-thread ID returning the values in an array:
Without Unified Memory: both host- and device-side storage for the return values is required (
host_retandretin the example), as is an explicit copy between the two usingcudaMemcpy().-
With Unified Memory: GPU accesses data directly from the host.
retmay be used without a separatehost_retallocation and no copy routine is required, greatly simplifying and reducing the size of the program. With:System Allocated: no other changes required.
Managed Memory: data allocation changed to use
cudaMallocManaged(), which returns a pointer valid from both host and device code.
19.1.2.1. Allocation APIs for System-Allocated Memory
On systems with full CUDA Unified Memory support, all memory is unified memory.
This includes memory allocated with system allocation APIs, such as malloc(), mmap(), C++ new() operator,
and also automatic variables on CPU thread stacks, thread locals, global variables, and so on.
System-Allocated Memory may be popullated on first touch, depending on the API and system settings used. First touch means that: - The allocation APIs allocate virtual memory and return immediately, and - physical memory is populated when a thread accesses the memory for the first time.
Usually, the physical memory will be chosen “close” to the processor that thread is running on. For example, - GPU thread accesses it first: physical GPU memory of GPU that thread runs on is chosen. - CPU thread accesses it first: physical CPU memory in the memory NUMA node of the CPU core that thread runs on is chosen.
CUDA Unified Memory Hint and Prefetch APIs, cudaMemAdvise and cudaMemPreftchAsync, may be used on System-Allocated Memory.
These APIs are covered below in the Data Usage Hints section.
__global__ void printme(char *str) {
printf(str);
}
int main() {
// Allocate 100 bytes of memory, accessible to both Host and Device code
char *s = (char*)malloc(100);
// Physical allocation placed in CPU memory because host accesses "s" first
strncpy(s, "Hello Unified Memory\n", 99);
// Here we pass "s" to a kernel without explicitly copying
printme<<< 1, 1 >>>(s);
cudaDeviceSynchronize();
// Free as for normal CUDA allocations
cudaFree(s);
return 0;
}
19.1.2.2. Allocation API for CUDA Managed Memory: cudaMallocManaged()
On systems with CUDA Managed Memory support, unified memory may be allocated using:
__host__ cudaError_t cudaMallocManaged(void **devPtr, size_t size);
This API is syntactically identical to cudaMalloc(): it allocates size bytes of managed memory and
sets devPtr to refer to the allocation.
CUDA Managed Memory is also deallocated with cudaFree().
On systems with full CUDA Managed Memory support, managed memory allocations
may be accessed concurrently by all CPUs and GPUs in the system.
Replacing host calls to cudaMalloc() with cudaMallocManaged(), does not impact program semantics on these systems;
device code is not able to call cudaMallocManaged().
The following example shows the use of cudaMallocManaged():
__global__ void printme(char *str) {
printf(str);
}
int main() {
// Allocate 100 bytes of memory, accessible to both Host and Device code
char *s;
cudaMallocManaged(&s, 100);
// Note direct Host-code use of "s"
strncpy(s, "Hello Unified Memory\n", 99);
// Here we pass "s" to a kernel without explicitly copying
printme<<< 1, 1 >>>(s);
cudaDeviceSynchronize();
// Free as for normal CUDA allocations
cudaFree(s);
return 0;
}
Note
For systems that support CUDA Managed Memory allocations, but do not provide full support, see Coherency and Concurrency. Implementation details (may change any time):
Devices of compute capability 5.x allocate CUDA Managed Memory on the GPU.
Devices of compute capability 6.x and greater populate the memory on first touch, just like System-Allocated Memory APIs.
19.1.2.3. Global-Scope Managed Variables Using __managed__
CUDA __managed__ variables behave as if they were allocated via cudaMallocManaged()
(see Allocation API for CUDA Managed Memory: cudaMallocManaged()).
They simplify programs with global variables, making it particularly easy to exchange data between host and device
without manual allocations or copying.
On systems with full CUDA Unified Memory support, file-scope or global-scope variables cannot be directly accessed by device code. But a pointer to these variables may be passed to the kernel as an argument, see System-Allocated Memory: in-depth examples for examples.
__global__ void write_value(int* ptr, int v) {
*ptr = v;
}
int main() {
// Requires System-Allocated Memory support
int value;
write_value<<<1, 1>>>(&value, 1);
// Synchronize required
// (before, cudaMemcpy was synchronizing)
cudaDeviceSynchronize();
printf("value = %d\n", value);
return 0;
}
__global__ void write_value(int* ptr, int v) {
*ptr = v;
}
// Requires CUDA Managed Memory support
__managed__ int value;
int main() {
write_value<<<1, 1>>>(&value, 1);
// Synchronize required
// (before, cudaMemcpy was synchronizing)
cudaDeviceSynchronize();
printf("value = %d\n", value);
return 0;
}
Note the absence of explicit cudaMemcpy() commands and the fact that the return array ret is visible on both CPU and GPU.
CUDA __managed__ variable implies __device__ and is equivalent to __managed__ __device__, which is also allowed.
Variables marked __constant__ may not be marked as __managed__.
A valid CUDA context is necessary for the correct operation of __managed__ variables.
Accessing __managed__ variables can trigger CUDA context creation if a context for the current device hasn’t already been created.
In the example above, accessing x before the kernel launch triggers context creation on device 0.
In the absence of that access, the kernel launch would have triggered context creation.
C++ objects declared as __managed__ are subject to certain specific constraints, particularly where static initializers are concerned.
Please refer to C++ Language Support for a list of these constraints.
Note
For devices with CUDA Managed Memory without full support, visibility of __managed__ variables for asynchronous operations executing in CUDA streams is discussed in the section on Managing Data Visibility and Concurrent CPU + GPU Access with Streams.
19.1.2.4. Difference between Unified Memory and Mapped Memory
The main difference between Unified Memory and Mapped Memory is that CUDA Mapped Memory does not guarantee that all kinds of memory accesses (for example atomics) are supported on all systems, while Unified Memory does. The limited set of memory operations that are guaranteed to be portably supported by CUDA Mapped Memory is available on more systems than Unified Memory.
19.1.2.5. Pointer Attributes
CUDA Programs may check whether a pointer addresses a CUDA Managed Memory allocation by calling cudaPointerGetAttributes() and
testing whether the pointer attribute value is cudaMemoryTypeManaged.
This API returns cudaMemoryTypeHost for System-Allocated Memory that has been registered with cudaHostRegister()
and cudaMemoryTypeUnregistered for System-Allocated Memory that CUDA is unaware of.
Pointer attributes do not state where the memory resides, they state how the memory was allocated or registered.
The following example shows how to detect the type of pointer at runtime:
char const* kind(cudaPointerAttributes a, bool pma, bool cma) {
switch(a.type) {
case cudaMemoryTypeHost: return pma?
"Unified: CUDA Host or Registered Memory" :
"Not Unified: CUDA Host or Registered Memory";
case cudaMemoryTypeDevice: return "Not Unified: CUDA Device Memory";
case cudaMemoryTypeManaged: return cma?
"Unified: CUDA Managed Memory" : "Not Unified: CUDA Managed Memory";
case cudaMemoryTypeUnregistered: return pma?
"Unified: System-Allocated Memory" :
"Not Unified: System-Allocated Memory";
default: return "unknown";
}
}
void check_pointer(int i, void* ptr) {
cudaPointerAttributes attr;
cudaPointerGetAttributes(&attr, ptr);
int pma = 0, cma = 0, device = 0;
cudaGetDevice(&device);
cudaDeviceGetAttribute(&pma, cudaDevAttrPageableMemoryAccess, device);
cudaDeviceGetAttribute(&cma, cudaDevAttrConcurrentManagedAccess, device);
printf("Pointer %d: memory is %s\n", i, kind(attr, pma, cma));
}
__managed__ int managed_var = 5;
int main() {
int* ptr[5];
ptr[0] = (int*)malloc(sizeof(int));
cudaMallocManaged(&ptr[1], sizeof(int));
cudaMallocHost(&ptr[2], sizeof(int));
cudaMalloc(&ptr[3], sizeof(int));
ptr[4] = &managed_var;
for (int i = 0; i < 5; ++i) check_pointer(i, ptr[i]);
cudaFree(ptr[3]);
cudaFreeHost(ptr[2]);
cudaFree(ptr[1]);
free(ptr[0]);
return 0;
}
19.1.2.6. Runtime detection of Unified Memory Support Level
The following example shows how to detect the Unified Memory support level at runtime:
int main() {
int d;
cudaGetDevice(&d);
int pma = 0;
cudaDeviceGetAttribute(&pma, cudaDevAttrPageableMemoryAccess, d);
printf("Full Unified Memory Support: %s\n", pma == 1? "YES" : "NO");
int cma = 0;
cudaDeviceGetAttribute(&cma, cudaDevAttrConcurrentManagedAccess, d);
printf("CUDA Managed Memory with full support: %s\n", cma == 1? "YES" : "NO");
return 0;
}
19.1.2.7. GPU Memory Oversubscription
Unified Memory enables applications to oversubscribe the memory of any individual processor: in other words they can allocate and share arrays larger than the memory capacity of any individual processor in the system, enabling among others out-of-core processing of datasets that do not fit within a single GPU, without adding significant complexity to the programming model.
19.1.2.8. Performance Hints
The following sections describes the available unified memory performance hints, which may be used on all Unified Memory, for example, CUDA Managed memory or, on systems with full CUDA Unified Memory support, also all System-Allocated Memory. These APIs are hints, that is, they do not impact the semantics of applications, only their peformance. That is, they can be added or removed anywhere on any application without impacting its results.
CUDA Unified Memory may not always have all the information necessary to make the best performance decisions related to unified memory. These performance hints enable the application to provide CUDA with more information.
Note that applications should only use these hints if they improve their performance.
19.1.2.8.1. Data Prefetching
The cudaMemPrefetchAsync API is an asynchronous stream-ordered API that may migrate data to reside closer to the specified processor.
The data may be accessed while it is being prefetched.
The migration does not begin until all prior operations in the stream have completed,
and completes before any subsequent operation in the stream.
cudaError_t cudaMemPrefetchAsync(const void *devPtr,
size_t count,
int dstDevice,
cudaStream_t stream);
A memory region containing [devPtr, devPtr + count) may be migrated to
the destination device dstDevice - or CPU if cudaCpuDeviceId used -
when the prefetch task is executed in the given stream.
Consider a simple code example below:
void test_prefetch_sam(cudaStream_t s) {
char *data = (char*)malloc(N);
init_data(data, N); // execute on CPU
cudaMemPrefetchAsync(data, N, myGpuId, s); // prefetch to GPU
mykernel<<<(N + TPB - 1) / TPB, TPB, 0, s>>>(data, N); // execute on GPU
cudaMemPrefetchAsync(data, N, cudaCpuDeviceId, s); // prefetch to CPU
cudaStreamSynchronize(s);
use_data(data, N);
free(data);
}
void test_prefetch_managed(cudaStream_t s) {
char *data;
cudaMallocManaged(&data, N);
init_data(data, N); // execute on CPU
cudaMemPrefetchAsync(data, N, myGpuId, s); // prefetch to GPU
mykernel<<<(N + TPB - 1) / TPB, TPB, 0, s>>>(data, N); // execute on GPU
cudaMemPrefetchAsync(data, N, cudaCpuDeviceId, s); // prefetch to CPU
cudaStreamSynchronize(s);
use_data(data, N);
cudaFree(data);
}
19.1.2.8.2. Data Usage Hints
When multiple processors simultaneously access the same data,
cudaMemAdvise may be used to hint how the data at
[devPtr, devPtr + count) will be accessed:
cudaError_t cudaMemAdvise(const void *devPtr,
size_t count,
enum cudaMemoryAdvise advice,
int device);
Where advice may take the following values:
cudaMemAdviseSetReadMostly: This implies that the data is mostly going to be read from and only occasionally written to. In general, it allows trading off read bandwidth for write bandwidth on this region. Example:
void test_advise_managed(cudaStream_t stream) {
char *dataPtr;
size_t dataSize = 64 * TPB; // 16 KiB
// Allocate memory using cudaMallocManaged
// (malloc may be used on systems with full CUDA Unified memory support)
cudaMallocManaged(&dataPtr, dataSize);
// Set the advice on the memory region
cudaMemAdvise(dataPtr, dataSize, cudaMemAdviseSetReadMostly, myGpuId);
int outerLoopIter = 0;
while (outerLoopIter < maxOuterLoopIter) {
// The data is written to in the outer loop on the CPU
init_data(dataPtr, dataSize);
// The data is made available to all GPUs by prefetching.
// Prefetching here causes read duplication of data instead
// of data migration
for (int device = 0; device < maxDevices; device++) {
cudaMemPrefetchAsync(dataPtr, dataSize, device, stream);
}
// The kernel only reads this data in the inner loop
int innerLoopIter = 0;
while (innerLoopIter < maxInnerLoopIter) {
mykernel<<<32, TPB, 0, stream>>>((const char *)dataPtr, dataSize);
innerLoopIter++;
}
outerLoopIter++;
}
cudaFree(dataPtr);
}
cudaMemAdviseSetPreferredLocation: In general, any memory may be migrated at any time to any location, for example, when a given processor is running out of physical memory. This hint tells the system that migrating this memory region away from its preferred location is undesired, by setting the preferred location for the data to be the physical memory belonging to device. Passing in a value ofcudaCpuDeviceIdfor device sets the preferred location as CPU memory. Other hints, likecudaMemPrefetchAsync, may override this hint, leading the memory to be migrated away from its preferred location.
cudaMemAdviseSetAccessedBy: In some systems, it may be beneficial for performance to establish a mapping into memory before accessing the data from a given processor. This hint tells the system that the data will be frequently accessed bydevice, enabling the system to assume that creating these mappings pays off. This hint does not imply where the data should reside, but it can be combined withcudaMemAdviseSetPreferredLocationto specify that.
Each advice can be also unset by using one of the following values:
cudaMemAdviseUnsetReadMostly, cudaMemAdviseUnsetPreferredLocation and
cudaMemAdviseUnsetAccessedBy.
19.1.2.8.3. Querying Data Usage Attributes on Managed Memory
A program can query memory range attributes assigned through cudaMemAdvise
or cudaMemPrefetchAsync on CUDA Managed Memory by using the following API:
cudaMemRangeGetAttribute(void *data,
size_t dataSize,
enum cudaMemRangeAttribute attribute,
const void *devPtr,
size_t count);
This function queries an attribute of the memory range starting at devPtr with a size of count bytes.
The memory range must refer to managed memory allocated via cudaMallocManaged or
declared via __managed__ variables. It is possible to query the following attributes:
cudaMemRangeAttributeReadMostly: the result returned will be 1 if the entire memory range has thecudaMemAdviseSetReadMostlyattribute set, or 0 otherwise.cudaMemRangeAttributePreferredLocation: the result returned will be a GPU device id orcudaCpuDeviceIdif the entire memory range has the corresponding processor as preferred location, otherwisecudaInvalidDeviceIdwill be returned. An application can use this query API to make decision about staging data through CPU or GPU depending on the preferred location attribute of the managed pointer. Note that the actual location of the memory range at the time of the query may be different from the preferred location.cudaMemRangeAttributeAccessedBy: will return the list of devices that have that advise set for that memory range.cudaMemRangeAttributeLastPrefetchLocation: will return the last location to which the memory range was prefetched explicitly usingcudaMemPrefetchAsync. Note that this simply returns the last location that the application requested to prefetch the memory range to. It gives no indication as to whether the prefetch operation to that location has completed or even begun.
Additionally, multiple attributes can be queried by using corresponding cudaMemRangeGetAttributes function.
19.2. Unified memory on devices with full CUDA Unified Memory support
19.2.1. System-Allocated Memory: in-depth examples
Systems with full CUDA Unified Memory support allow the device to access any memory owned by the host process interacting with the device. This section shows a few advanced use-cases, using a kernel that simply prints the first 8 characters of an input character array to the standard output stream:
__global__ void kernel(const char* type, const char* data) {
static const int n_char = 8;
printf("%s - first %d characters: '", type, n_char);
for (int i = 0; i < n_char; ++i) printf("%c", data[i]);
printf("'\n");
}
The following tabs show various ways of how this kernel may be called:
void test_malloc() {
const char test_string[] = "Hello World";
char* heap_data = (char*)malloc(sizeof(test_string));
strncpy(heap_data, test_string, sizeof(test_string));
kernel<<<1, 1>>>("malloc", heap_data);
ASSERT(cudaDeviceSynchronize() == cudaSuccess,
"CUDA failed with '%s'", cudaGetErrorString(cudaGetLastError()));
free(heap_data);
}
void test_managed() {
const char test_string[] = "Hello World";
char* data;
cudaMallocManaged(&data, sizeof(test_string));
strncpy(data, test_string, sizeof(test_string));
kernel<<<1, 1>>>("managed", data);
ASSERT(cudaDeviceSynchronize() == cudaSuccess,
"CUDA failed with '%s'", cudaGetErrorString(cudaGetLastError()));
cudaFree(data);
}
void test_stack() {
const char test_string[] = "Hello World";
kernel<<<1, 1>>>("stack", test_string);
ASSERT(cudaDeviceSynchronize() == cudaSuccess,
"CUDA failed with '%s'", cudaGetErrorString(cudaGetLastError()));
}
void test_static() {
static const char test_string[] = "Hello World";
kernel<<<1, 1>>>("static", test_string);
ASSERT(cudaDeviceSynchronize() == cudaSuccess,
"CUDA failed with '%s'", cudaGetErrorString(cudaGetLastError()));
}
const char global_string[] = "Hello World";
void test_global() {
kernel<<<1, 1>>>("global", global_string);
ASSERT(cudaDeviceSynchronize() == cudaSuccess,
"CUDA failed with '%s'", cudaGetErrorString(cudaGetLastError()));
}
// declared in separate file, see below
extern char* ext_data;
void test_extern() {
kernel<<<1, 1>>>("extern", ext_data);
ASSERT(cudaDeviceSynchronize() == cudaSuccess,
"CUDA failed with '%s'", cudaGetErrorString(cudaGetLastError()));
}
/** This may be a non-CUDA file */
char* ext_data;
static const char global_string[] = "Hello World";
void __attribute__ ((constructor)) setup(void) {
ext_data = (char*)malloc(sizeof(global_string));
strncpy(ext_data, global_string, sizeof(global_string));
}
void __attribute__ ((destructor)) tear_down(void) {
free(ext_data);
}
The first three tabs above show the example as already detailed in the Programming Model section. The next three tabs show various ways a file-scope or global-scope variable can be accessed from the device.
Note that for the extern variable, it could be declared and its memory owned and managed by a third-party library, which does not interact with CUDA at all.
Also note that stack variables as well as file-scope and global-scope variables can
only be accessed through a pointer by the GPU. In this specific example, this is
convenient because the character array is already declared as a pointer: const char*.
However, consider the following example with a global-scope integer:
// this variable is declared at global scope
int global_variable;
__global__ void kernel_uncompilable() {
// this causes a compilation error: global (__host__) variables must not
// be accessed from __device__ / __global__ code
printf("%d\n", global_variable);
}
// On systems with pageableMemoryAccess set to 1, we can access the address
// of a global variable. The below kernel takes that address as an argument
__global__ void kernel(int* global_variable_addr) {
printf("%d\n", *global_variable_addr);
}
int main() {
kernel<<<1, 1>>>(&global_variable);
...
return 0;
}
In the example above, we need to ensure to pass a pointer to the global variable
to the kernel instead of directly accessing the global variable in the kernel.
This is because global variables without the __managed__ specifier are declared
as __host__-only by default, thus most compilers won’t allow using these
variables directly in device code as of now.
19.2.1.1. File-backed Unified Memory
Since systems with full CUDA Unified Memory support allow the device to access any memory owned by the host process, they can directly access file-backed memory.
Here, we show a modified version of the initial example shown in the previous section to use file-backed memory in order to print a string from the GPU, read directly from an input file. In the following example, the memory is backed by a physical file, but the example applies to memory-backed files, too, as shown in the section on Inter-Process Communication (IPC) with Unified Memory.
__global__ void kernel(const char* type, const char* data) {
static const int n_char = 8;
printf("%s - first %d characters: '", type, n_char);
for (int i = 0; i < n_char; ++i) printf("%c", data[i]);
printf("'\n");
}
void test_file_backed() {
int fd = open(INPUT_FILE_NAME, O_RDONLY);
ASSERT(fd >= 0, "Invalid file handle");
struct stat file_stat;
int status = fstat(fd, &file_stat);
ASSERT(status >= 0, "Invalid file stats");
char* mapped = (char*)mmap(0, file_stat.st_size, PROT_READ, MAP_PRIVATE, fd, 0);
ASSERT(mapped != MAP_FAILED, "Cannot map file into memory");
kernel<<<1, 1>>>("file-backed", mapped);
ASSERT(cudaDeviceSynchronize() == cudaSuccess,
"CUDA failed with '%s'", cudaGetErrorString(cudaGetLastError()));
ASSERT(munmap(mapped, file_stat.st_size) == 0, "Cannot unmap file");
ASSERT(close(fd) == 0, "Cannot close file");
}
Note that on systems without the hostNativeAtomicSupported property, including
systems with Linux HMM enabled,
atomic accesses to file-backed memory are not supported.
19.2.1.2. Inter-Process Communication (IPC) with Unified Memory
Note
As of now, using IPC with Unified Memory can have significant performance implications.
Many applications prefer to manage one GPU per process, but still need to use Unified Memory, for example for over-subscription, and access it from multiple GPUs.
CUDA IPC (see Interprocess Communication) does not support Managed Memory: handles to this type of memory may not be shared through any of the mechanisms discussed in this section. On systems with full CUDA Unified Memory support, System-Allocated Memory is Inter-Process Communication (IPC) capable. Once access to System-Allocated Memory has been shared with other processes, the same Programming Model applies, similar to File-backed Unified Memory.
See the following references for more information on various ways of creating IPC-capable System-Allocated Memory under Linux:
Note that it is not possible to share memory between different hosts and their devices using this technique.
19.2.2. Performance Tuning
In order to achieve good performance with Unified Memory, it is important to:
Understand how paging works on your system, and how to avoid unnecessary page faults.
Understand the various mechanisms allowing to keep data local to the accessing processor.
Consider tuning your application for the granularity of memory transfers of your system.
As general advice, Performance Hints might provide improved performance, but using them incorrectly might degrade performance compared to the default behavior. Also note that any hint has a performance cost associated with it on the host, thus useful hints must at the very least improve performance enough to overcome this cost.
19.2.2.1. Memory Paging and Page Sizes
Many of the sections for unified memory performance tuning assume prior knowledge on virtual addressing, memory pages and page sizes. This section attempts to define all necessary terms and explain why paging matters for performance.
All currently supported systems for Unified Memory use a virtual address space: this means that memory addresses used by an application represent a virtual location which might be mapped to a physical location where the memory actually resides.
All currently supported processors, including both CPUs and GPUs, additionally use memory paging. Because all systems use a virtual address space, there are two types of memory pages:
Virtual pages: this represents a fixed-size contiguous chunk of virtual memory per process tracked by the operating system, which can be mapped into physical memory. Note that the virtual page is linked to the mapping: for example, a single virtual address might be mapped into physical memory using different page sizes.
Physical pages: this represents a fixed-size contiguous chunk of memory the processor’s main Memory Management Unit (MMU) supports and into which a virtual page can be mapped.
Currently, all x86_64 CPUs use 4KiB physical pages. Arm CPUs support multiple physical page sizes - 4KiB, 16KiB, 32KiB and 64KiB - depending on the exact CPU. Finally, NVIDIA GPUs support multiple physical page sizes, but prefer 2MiB physical pages or larger. Note that these sizes are subject to change in future hardware.
The default page size of virtual pages usually corresponds to the physical page size, but an application may use different page sizes as long as they are supported by the operating system and the hardware. Typically, supported virtual page sizes must be powers of 2 and multiples of the physical page size.
The logical entity tracking the mapping of virtual pages into physical pages will be referred to as a page table, and each mapping of a given virtual page with a given virtual size to physical pages is called a page table entry (PTE). All supported processors provide specific caches for the page table to speed up the translation of virtual addresses to physical addresses. These caches are called translation lookaside buffers (TLBs).
There are two important aspects for performance tuning of applications:
the choice of virtual page size,
whether the system offers a combined page table used by both CPUs and GPUs, or separate page tables for each CPU and GPU individually.
19.2.2.1.1. Choosing the right page size
In general, small page sizes lead to less (virtual) memory fragmentation but more TLB misses, whereas larger page sizes lead to more memory fragmentation but less TLB misses. Additionally, memory migration is generally more expensive with larger page sizes compared to smaller page sizes, because we typically migrate full memory pages. This can cause larger latency spikes in an application using large page sizes. See also the next section for more details on page faults.
One important aspect for performance tuning is that TLB misses are generally significantly more expensive on the GPU compared to the CPU. This means that if a GPU thread frequently accesses random locations of Unified Memory mapped using a small enough page size, it might be significantly slower compared to the same accesses to Unified Memory mapped using a large enough page size. While a similar effect might occur for a CPU thread randomly accessing a large area of memory mapped using a small page size, the slowdown is less pronounced, meaning that the application might want to trade-off this slowdown with having less memory fragmentation.
Note that in general, applications should not tune their performance to the physical page size of a given processor, since physical page sizes are subject to change depending on the hardware. The advice above only applies to virtual page sizes.
19.2.2.1.2. CPU and GPU page tables: hardware coherency vs. software coherency
Note
In the remainder of the performance tuning documentation, we will refer to systems with a combined page table for both CPUs and GPUs as hardware coherent systems. Systems with separate page tables for CPUs and GPUs are referred to as software coherent.
Hardware coherent systems such as NVIDIA Grace Hopper offer a logically combined page table for both CPUs and GPUs. This is important because in order to access System-Allocated Memory from the GPU, the GPU uses whichever page table entry was created by the CPU for the requested memory. If that page table entry uses the default CPU page size of 4KiB or 64KiB, accesses to large virtual memory areas will cause significant TLB misses, thus significant slowdowns.
See the section on configuring huge pages for examples on how to ensure System-Allocated Memory uses large enough page sizes to avoid this type of issue.
On the other hand, on systems where the CPUs and GPUs each have their own logical page table, different performance tuning aspects should be considered: in order to guarantee coherency, these systems usually use page faults in case a processor accesses a memory address mapped into the physical memory of a different processor. Such a page fault means that:
it needs to be ensured that the currently owning processor (where the physical page currently resides) cannot access this page anymore, either by deleting the page table entry or updating it.
it needs to be ensured that the processor requesting access can access this page, either by creating a new page table entry or updating and existing entry, such that it becomes valid/active.
the physical page backing this virtual page must be moved/migrated to the processor requesting access: this can be an expensive operation, and the amount of work is proportional to the page size.
Overall, hardware coherent systems provide significant performance benefits compared to software coherent systems in cases where frequent concurrent accesses to the same memory page are made by both CPU and GPU threads:
less page-faults: these systems do not need to use page-faults for emulating coherency or migrating memory,
less contention: these systems are coherent at cache-line granularity instead of page-size granularity, that is, when there is contention from multiple processors within a cache line, only the cache line is exchanged which is much smaller than the smallest page-size, and when the different processors access different cache-lines within a page, then there is no contention.
This impacts the performance of the following scenarios:
Atomic updates to the same address concurrently from both CPUs and GPUs.
Signaling a GPU thread from a CPU thread or vice-versa.
19.2.2.2. Direct Unified Memory Access from host
Some devices have hardware support for coherent reads, stores and atomic accesses
from the host on GPU-resident unified memory.
These devices have the attribute cudaDevAttrDirectManagedMemAccessFromHost set to 1.
Note that all hardware coherent systems have
this attribute set for NVLink-connected devices.
On these systems, the host has direct access to GPU-resident memory without page faults and
data migration (see Data Usage Hints
for more details on memory usage hints). Note that with CUDA Managed Memory,
the cudaMemAdviseSetAccessedBy hint with cudaCpuDeviceId is necessary
to enable this direct access without page faults.
Consider an example code below:
__global__ void write(int *ret, int a, int b) {
ret[threadIdx.x] = a + b + threadIdx.x;
}
__global__ void append(int *ret, int a, int b) {
ret[threadIdx.x] += a + b + threadIdx.x;
}
void test_malloc() {
int *ret = (int*)malloc(1000 * sizeof(int));
// for shared page table systems, the following hint is not necesary
cudaMemAdvise(ret, 1000 * sizeof(int), cudaMemAdviseSetAccessedBy, cudaCpuDeviceId);
write<<< 1, 1000 >>>(ret, 10, 100); // pages populated in GPU memory
cudaDeviceSynchronize();
for(int i = 0; i < 1000; i++)
printf("%d: A+B = %d\n", i, ret[i]); // directManagedMemAccessFromHost=1: CPU accesses GPU memory directly without migrations
// directManagedMemAccessFromHost=0: CPU faults and triggers device-to-host migrations
append<<< 1, 1000 >>>(ret, 10, 100); // directManagedMemAccessFromHost=1: GPU accesses GPU memory without migrations
cudaDeviceSynchronize(); // directManagedMemAccessFromHost=0: GPU faults and triggers host-to-device migrations
free(ret);
}
__global__ void write(int *ret, int a, int b) {
ret[threadIdx.x] = a + b + threadIdx.x;
}
__global__ void append(int *ret, int a, int b) {
ret[threadIdx.x] += a + b + threadIdx.x;
}
void test_managed() {
int *ret;
cudaMallocManaged(&ret, 1000 * sizeof(int));
cudaMemAdvise(ret, 1000 * sizeof(int), cudaMemAdviseSetAccessedBy, cudaCpuDeviceId); // set direct access hint
write<<< 1, 1000 >>>(ret, 10, 100); // pages populated in GPU memory
cudaDeviceSynchronize();
for(int i = 0; i < 1000; i++)
printf("%d: A+B = %d\n", i, ret[i]); // directManagedMemAccessFromHost=1: CPU accesses GPU memory directly without migrations
// directManagedMemAccessFromHost=0: CPU faults and triggers device-to-host migrations
append<<< 1, 1000 >>>(ret, 10, 100); // directManagedMemAccessFromHost=1: GPU accesses GPU memory without migrations
cudaDeviceSynchronize(); // directManagedMemAccessFromHost=0: GPU faults and triggers host-to-device migrations
cudaFree(ret);
}
After write kernel is completed, ret will be created and initialized in GPU memory.
Next, the CPU will access ret followed by append kernel using the same ret memory again.
This code will show different behavior depending on the system architecture and support of hardware coherency:
On systems with
directManagedMemAccessFromHost=1: CPU accesses to the managed buffer will not trigger any migrations; the data will remain resident in GPU memory and any subsequent GPU kernels can continue to access it directly without inflicting faults or migrations.On systems with
directManagedMemAccessFromHost=0: CPU accesses to the managed buffer will page fault and initiate data migration; any GPU kernel trying to access the same data first time will page fault and migrate pages back to GPU memory.
19.2.2.3. Host Native Atomics
Some devices, including NVLink-connected devices in
hardware coherent systems, support hardware-accelerated
atomic accesses to CPU-resident memory. This implies that atomic accesses to host memory
do not have to be emulated with a page fault.
For these devices, the attribute cudaDevAttrHostNativeAtomicSupported is set to 1.
19.2.2.4. Atomic accesses & synchronization primitives
CUDA Unified Memory supports all atomic operations available to host and device threads,
enabling all threads to cooperate by concurrently accessing the same shared memory location.
The CUDA C++ standard library
provides many heterogeneous synchronization primitives tuned for concurrent use between host and device threads,
including cuda::atomic, cuda::atomic_ref, cuda::barrier, cuda::semaphore, among many others.
On systems without CPU and GPU page tables: hardware coherency vs. software coherency, atomic accesses from the device to file-backed host memory are not supported. The following example code is valid on systems with CPU and GPU page tables: hardware coherency vs. software coherency but exhibits undefined behavior on other systems:
#include <cuda/atomic>
#include <cstdio>
#include <fcntl.h>
#include <sys/mman.h>
#define ERR(msg, ...) { fprintf(stderr, msg, ##__VA_ARGS__); return EXIT_FAILURE; }
__global__ void kernel(int* ptr) {
cuda::atomic_ref{*ptr}.store(2);
}
int main() {
// this will be closed/deleted by default on exit
FILE* tmp_file = tmpfile64();
// need to allcate space in the file, we do this with posix_fallocate here
int status = posix_fallocate(fileno(tmp_file), 0, 4096);
if (status != 0) ERR("Failed to allocate space in temp file\n");
int* ptr = (int*)mmap(NULL, 4096, PROT_READ | PROT_WRITE, MAP_PRIVATE, fileno(tmp_file), 0);
if (ptr == MAP_FAILED) ERR("Failed to map temp file\n");
// initialize the value in our file-backed memory
*ptr = 1;
printf("Atom value: %d\n", *ptr);
// device and host thread access ptr concurrently, using cuda::atomic_ref
kernel<<<1, 1>>>(ptr);
while (cuda::atomic_ref{*ptr}.load() != 2);
// this will always be 2
printf("Atom value: %d\n", *ptr);
return EXIT_SUCCESS;
}
On systems without CPU and GPU page tables: hardware coherency vs. software coherency,
atomic accesses to unified memory may incur page faults which can lead to significant latencies.
Note that this is not the case for all GPU atomics to CPU memory on these systems:
operations listed by nvidia-smi -q | grep "Atomic Caps Outbound" may avoid page faults.
On systems with CPU and GPU page tables: hardware coherency vs. software coherency, atomics between host and device do not require page faults, but may still fault for other reasons that any memory access can fault for.
19.2.2.5. Memcpy()/Memset() Behavior With Unified Memory
cudaMemcpy*() and cudaMemset*() accept any unified memory pointer as arguments.
For cudaMemcpy*(), the direction specified as cudaMemcpyKind is a performance hint,
which can have a higher performance impact if any of the arguments is a unified memory pointer.
Thus, it is recommended to follow the following performance advice:
When the physical location of unified memory is known, use an accurate
cudaMemcpyKindhint.Prefer
cudaMemcpyKindDefaultover an inaccuratecudaMemcpyKindhint.Always use populated (initialized) buffers: avoid using these APIs to initialize memory.
Avoid using
cudaMemcpy*()if both pointers point to System-Allocated Memory: launch a kernel or use a CPU memory copy algorithm such asstd::memcpyinstead.
19.3. Unified memory on devices without full CUDA Unified Memory support
19.3.1. Unified memory on devices with only CUDA Managed Memory support
For devices with compute capability 6.x or higher but without pageable memory access, CUDA Managed Memory is fully supported and coherent. The programming model and performance tuning of unified memory is largely similar to the model as described in Unified memory on devices with full CUDA Unified Memory support, with the notable exception that system allocators cannot be used to allocate memory. Thus, the following list of sub-sections do not apply:
19.3.2. Unified memory on Windows or devices with compute capability 5.x
Devices with compute capability lower than 6.0 or Windows platforms support CUDA Managed Memory v1.0 with limited support for data migration and coherency as well as memory oversubscription. The following sub-sections describe in more detail how to use and optimize Managed Memory on these platforms.
19.3.2.1. Data Migration and Coherency
GPU architectures of compute capability lower than 6.0 do not support fine-grained movement of the managed data to GPU on-demand. Whenever a GPU kernel is launched all managed memory generally has to be transferred to GPU memory to avoid faulting on memory access. With compute capability 6.x a new GPU page faulting mechanism is introduced that provides more seamless Unified Memory functionality. Combined with the system-wide virtual address space, page faulting provides several benefits. First, page faulting means that the CUDA system software doesn’t need to synchronize all managed memory allocations to the GPU before each kernel launch. If a kernel running on the GPU accesses a page that is not resident in its memory, it faults, allowing the page to be automatically migrated to the GPU memory on-demand. Alternatively, the page may be mapped into the GPU address space for access over the PCIe or NVLink interconnects (mapping on access can sometimes be faster than migration). Note that Unified Memory is system-wide: GPUs (and CPUs) can fault on and migrate memory pages either from CPU memory or from the memory of other GPUs in the system.
19.3.2.2. GPU Memory Oversubscription
Devices of compute capability lower than 6.0 cannot allocate more managed memory than the physical size of GPU memory.
19.3.2.3. Multi-GPU
On systems with devices of compute capabilities lower than 6.0 managed allocations are automatically visible to all GPUs in a system via the peer-to-peer capabilities of the GPUs. Managed memory allocations behave similar to unmanaged memory allocated using cudaMalloc(): the current active device is the home for the physical allocation but other GPUs in the system will access the memory at reduced bandwidth over the PCIe bus.
On Linux the managed memory is allocated in GPU memory as long as all GPUs that are actively being used by a program have the peer-to-peer support. If at any time the application starts using a GPU that doesn’t have peer-to-peer support with any of the other GPUs that have managed allocations on them, then the driver will migrate all managed allocations to system memory. In this case, all GPUs experience PCIe bandwidth restrictions.
On Windows, if peer mappings are not available (for example, between GPUs of different architectures), then the system will automatically fall back to using zero-copy memory, regardless of whether both GPUs are actually used by a program. If only one GPU is actually going to be used, it is necessary to set the CUDA_VISIBLE_DEVICES environment variable before launching the program. This constrains which GPUs are visible and allows managed memory to be allocated in GPU memory.
Alternatively, on Windows users can also set CUDA_MANAGED_FORCE_DEVICE_ALLOC to a non-zero value to force the driver to always use device memory for physical storage. When this environment variable is set to a non-zero value, all devices used in that process that support managed memory have to be peer-to-peer compatible with each other. The error ::cudaErrorInvalidDevice will be returned if a device that supports managed memory is used and it is not peer-to-peer compatible with any of the other managed memory supporting devices that were previously used in that process, even if ::cudaDeviceReset has been called on those devices. These environment variables are described in CUDA Environment Variables. Note that starting from CUDA 8.0 CUDA_MANAGED_FORCE_DEVICE_ALLOC has no effect on Linux operating systems.
19.3.2.4. Coherency and Concurrency
Simultaneous access to managed memory on devices of compute capability lower than 6.0 is not possible, because coherence could not be guaranteed if the CPU accessed a Unified Memory allocation while a GPU kernel was active.
19.3.2.4.1. GPU Exclusive Access To Managed Memory
To ensure coherency on pre-6.x GPU architectures, the Unified Memory programming model puts constraints on data accesses while both the CPU and GPU are executing concurrently. In effect, the GPU has exclusive access to all managed data while any kernel operation is executing, regardless of whether the specific kernel is actively using the data. When managed data is used with cudaMemcpy*() or cudaMemset*(), the system may choose to access the source or destination from the host or the device, which will put constraints on concurrent CPU access to that data while the cudaMemcpy*() or cudaMemset*() is executing. See Memcpy()/Memset() Behavior With Unified Memory for further details.
It is not permitted for the CPU to access any managed allocations or variables while the GPU is active for devices with concurrentManagedAccess property set to 0. On these systems concurrent CPU/GPU accesses, even to different managed memory allocations, will cause a segmentation fault because the page is considered inaccessible to the CPU.
__device__ __managed__ int x, y=2;
__global__ void kernel() {
x = 10;
}
int main() {
kernel<<< 1, 1 >>>();
y = 20; // Error on GPUs not supporting concurrent access
cudaDeviceSynchronize();
return 0;
}
In example above, the GPU program kernel is still active when the CPU touches y. (Note how it occurs before cudaDeviceSynchronize().) The code runs successfully on devices of compute capability 6.x due to the GPU page faulting capability which lifts all restrictions on simultaneous access. However, such memory access is invalid on pre-6.x architectures even though the CPU is accessing different data than the GPU. The program must explicitly synchronize with the GPU before accessing y:
__device__ __managed__ int x, y=2;
__global__ void kernel() {
x = 10;
}
int main() {
kernel<<< 1, 1 >>>();
cudaDeviceSynchronize();
y = 20; // Success on GPUs not supporing concurrent access
return 0;
}
As this example shows, on systems with pre-6.x GPU architectures, a CPU thread may not access any managed data in between performing a kernel launch and a subsequent synchronization call, regardless of whether the GPU kernel actually touches that same data (or any managed data at all). The mere potential for concurrent CPU and GPU access is sufficient for a process-level exception to be raised.
Note that if memory is dynamically allocated with cudaMallocManaged() or cuMemAllocManaged() while the GPU is active, the behavior of the memory is unspecified until additional work is launched or the GPU is synchronized. Attempting to access the memory on the CPU during this time may or may not cause a segmentation fault. This does not apply to memory allocated using the flag cudaMemAttachHost or CU_MEM_ATTACH_HOST.
19.3.2.4.2. Explicit Synchronization and Logical GPU Activity
Note that explicit synchronization is required even if kernel runs quickly and finishes before the CPU touches y in the above example. Unified Memory uses logical activity to determine whether the GPU is idle. This aligns with the CUDA programming model, which specifies that a kernel can run at any time following a launch and is not guaranteed to have finished until the host issues a synchronization call.
Any function call that logically guarantees the GPU completes its work is valid. This includes cudaDeviceSynchronize(); cudaStreamSynchronize() and cudaStreamQuery() (provided it returns cudaSuccess and not cudaErrorNotReady) where the specified stream is the only stream still executing on the GPU; cudaEventSynchronize() and cudaEventQuery() in cases where the specified event is not followed by any device work; as well as uses of cudaMemcpy() and cudaMemset() that are documented as being fully synchronous with respect to the host.
Dependencies created between streams will be followed to infer completion of other streams by synchronizing on a stream or event. Dependencies can be created via cudaStreamWaitEvent() or implicitly when using the default (NULL) stream.
It is legal for the CPU to access managed data from within a stream callback, provided no other stream that could potentially be accessing managed data is active on the GPU. In addition, a callback that is not followed by any device work can be used for synchronization: for example, by signaling a condition variable from inside the callback; otherwise, CPU access is valid only for the duration of the callback(s).
There are several important points of note:
It is always permitted for the CPU to access non-managed zero-copy data while the GPU is active.
The GPU is considered active when it is running any kernel, even if that kernel does not make use of managed data. If a kernel might use data, then access is forbidden, unless device property
concurrentManagedAccessis 1.There are no constraints on concurrent inter-GPU access of managed memory, other than those that apply to multi-GPU access of non-managed memory.
There are no constraints on concurrent GPU kernels accessing managed data.
Note how the last point allows for races between GPU kernels, as is currently the case for non-managed GPU memory. As mentioned previously, managed memory functions identically to non-managed memory from the perspective of the GPU. The following code example illustrates these points:
int main() {
cudaStream_t stream1, stream2;
cudaStreamCreate(&stream1);
cudaStreamCreate(&stream2);
int *non_managed, *managed, *also_managed;
cudaMallocHost(&non_managed, 4); // Non-managed, CPU-accessible memory
cudaMallocManaged(&managed, 4);
cudaMallocManaged(&also_managed, 4);
// Point 1: CPU can access non-managed data.
kernel<<< 1, 1, 0, stream1 >>>(managed);
*non_managed = 1;
// Point 2: CPU cannot access any managed data while GPU is busy,
// unless concurrentManagedAccess = 1
// Note we have not yet synchronized, so "kernel" is still active.
*also_managed = 2; // Will issue segmentation fault
// Point 3: Concurrent GPU kernels can access the same data.
kernel<<< 1, 1, 0, stream2 >>>(managed);
// Point 4: Multi-GPU concurrent access is also permitted.
cudaSetDevice(1);
kernel<<< 1, 1 >>>(managed);
return 0;
}
19.3.2.4.3. Managing Data Visibility and Concurrent CPU + GPU Access with Streams
Until now it was assumed that for SM architectures before 6.x: 1) any active kernel may use any managed memory, and 2) it was invalid to use managed memory from the CPU while a kernel is active. Here we present a system for finer-grained control of managed memory designed to work on all devices supporting managed memory, including older architectures with concurrentManagedAccess equal to 0.
The CUDA programming model provides streams as a mechanism for programs to indicate dependence and independence among kernel launches. Kernels launched into the same stream are guaranteed to execute consecutively, while kernels launched into different streams are permitted to execute concurrently. Streams describe independence between work items and hence allow potentially greater efficiency through concurrency.
Unified Memory builds upon the stream-independence model by allowing a CUDA program to explicitly associate managed allocations with a CUDA stream. In this way, the programmer indicates the use of data by kernels based on whether they are launched into a specified stream or not. This enables opportunities for concurrency based on program-specific data access patterns. The function to control this behavior is:
cudaError_t cudaStreamAttachMemAsync(cudaStream_t stream,
void *ptr,
size_t length=0,
unsigned int flags=0);
The cudaStreamAttachMemAsync() function associates length bytes of memory starting from ptr with the specified stream. (Currently, length must always be 0 to indicate that the entire region should be attached.) Because of this association, the Unified Memory system allows CPU access to this memory region so long as all operations in stream have completed, regardless of whether other streams are active. In effect, this constrains exclusive ownership of the managed memory region by an active GPU to per-stream activity instead of whole-GPU activity.
Most importantly, if an allocation is not associated with a specific stream, it is visible to all running kernels regardless of their stream. This is the default visibility for a cudaMallocManaged() allocation or a __managed__ variable; hence, the simple-case rule that the CPU may not touch the data while any kernel is running.
By associating an allocation with a specific stream, the program makes a guarantee that only kernels launched into that stream will touch that data. No error checking is performed by the Unified Memory system: it is the programmer’s responsibility to ensure that guarantee is honored.
In addition to allowing greater concurrency, the use of cudaStreamAttachMemAsync() can (and typically does) enable data transfer optimizations within the Unified Memory system that may affect latencies and other overhead.
19.3.2.4.4. Stream Association Examples
Associating data with a stream allows fine-grained control over CPU + GPU concurrency, but what data is visible to which streams must be kept in mind when using devices of compute capability lower than 6.0. Looking at the earlier synchronization example:
__device__ __managed__ int x, y=2;
__global__ void kernel() {
x = 10;
}
int main() {
cudaStream_t stream1;
cudaStreamCreate(&stream1);
cudaStreamAttachMemAsync(stream1, &y, 0, cudaMemAttachHost);
cudaDeviceSynchronize(); // Wait for Host attachment to occur.
kernel<<< 1, 1, 0, stream1 >>>(); // Note: Launches into stream1.
y = 20; // Success – a kernel is running but “y”
// has been associated with no stream.
return 0;
}
Here we explicitly associate y with host accessibility, thus enabling access at all times from the CPU. (As before, note the absence of cudaDeviceSynchronize() before the access.) Accesses to y by the GPU running kernel will now produce undefined results.
Note that associating a variable with a stream does not change the associating of any other variable. For example, associating x with stream1 does not ensure that only x is accessed by kernels launched in stream1, thus an error is caused by this code:
__device__ __managed__ int x, y=2;
__global__ void kernel() {
x = 10;
}
int main() {
cudaStream_t stream1;
cudaStreamCreate(&stream1);
cudaStreamAttachMemAsync(stream1, &x);// Associate “x” with stream1.
cudaDeviceSynchronize(); // Wait for “x” attachment to occur.
kernel<<< 1, 1, 0, stream1 >>>(); // Note: Launches into stream1.
y = 20; // ERROR: “y” is still associated globally
// with all streams by default
return 0;
}
Note how the access to y will cause an error because, even though x has been associated with a stream, we have told the system nothing about who can see y. The system therefore conservatively assumes that kernel might access it and prevents the CPU from doing so.
19.3.2.4.5. Stream Attach With Multithreaded Host Programs
The primary use for cudaStreamAttachMemAsync() is to enable independent task parallelism using CPU threads. Typically in such a program, a CPU thread creates its own stream for all work that it generates because using CUDA’s NULL stream would cause dependencies between threads.
The default global visibility of managed data to any GPU stream can make it difficult to avoid interactions between CPU threads in a multi-threaded program. Function cudaStreamAttachMemAsync() is therefore used to associate a thread’s managed allocations with that thread’s own stream, and the association is typically not changed for the life of the thread.
Such a program would simply add a single call to cudaStreamAttachMemAsync() to use unified memory for its data accesses:
// This function performs some task, in its own private stream.
void run_task(int *in, int *out, int length) {
// Create a stream for us to use.
cudaStream_t stream;
cudaStreamCreate(&stream);
// Allocate some managed data and associate with our stream.
// Note the use of the host-attach flag to cudaMallocManaged();
// we then associate the allocation with our stream so that
// our GPU kernel launches can access it.
int *data;
cudaMallocManaged((void **)&data, length, cudaMemAttachHost);
cudaStreamAttachMemAsync(stream, data);
cudaStreamSynchronize(stream);
// Iterate on the data in some way, using both Host & Device.
for(int i=0; i<N; i++) {
transform<<< 100, 256, 0, stream >>>(in, data, length);
cudaStreamSynchronize(stream);
host_process(data, length); // CPU uses managed data.
convert<<< 100, 256, 0, stream >>>(out, data, length);
}
cudaStreamSynchronize(stream);
cudaStreamDestroy(stream);
cudaFree(data);
}
In this example, the allocation-stream association is established just once, and then data is used repeatedly by both the host and device. The result is much simpler code than occurs with explicitly copying data between host and device, although the result is the same.
19.3.2.4.6. Advanced Topic: Modular Programs and Data Access Constraints
In the previous example cudaMallocManaged() specifies the cudaMemAttachHost flag, which creates an allocation that is initially invisible to device-side execution. (The default allocation would be visible to all GPU kernels on all streams.) This ensures that there is no accidental interaction with another thread’s execution in the interval between the data allocation and when the data is acquired for a specific stream.
Without this flag, a new allocation would be considered in-use on the GPU if a kernel launched by another thread happens to be running. This might impact the thread’s ability to access the newly allocated data from the CPU (for example, within a base-class constructor) before it is able to explicitly attach it to a private stream. To enable safe independence between threads, therefore, allocations should be made specifying this flag.
Note
An alternative would be to place a process-wide barrier across all threads after the allocation has been attached to the stream. This would ensure that all threads complete their data/stream associations before any kernels are launched, avoiding the hazard. A second barrier would be needed before the stream is destroyed because stream destruction causes allocations to revert to their default visibility. The cudaMemAttachHost flag exists both to simplify this process, and because it is not always possible to insert global barriers where required.
19.3.2.4.7. Memcpy()/Memset() Behavior With Stream-associated Unified Memory
See Memcpy()/Memset() Behavior With Unified Memory for a general overview of cudaMemcpy* / cudaMemset* behavior on devices with concurrentManagedAccess set. On devices where concurrentManagedAccess is not set, the following rules apply:
If cudaMemcpyHostTo* is specified and the source data is unified memory, then it will be accessed from the host if it is coherently accessible from the host in the copy stream (1); otherwise it will be accessed from the device. Similar rules apply to the destination when cudaMemcpy*ToHost is specified and the destination is unified memory.
If cudaMemcpyDeviceTo* is specified and the source data is unified memory, then it will be accessed from the device. The source must be coherently accessible from the device in the copy stream (2); otherwise, an error is returned. Similar rules apply to the destination when cudaMemcpy*ToDevice is specified and the destination is unified memory.
If cudaMemcpyDefault is specified, then unified memory will be accessed from the host either if it cannot be coherently accessed from the device in the copy stream (2) or if the preferred location for the data is cudaCpuDeviceId and it can be coherently accessed from the host in the copy stream (1); otherwise, it will be accessed from the device.
When using cudaMemset*() with unified memory, the data must be coherently accessible from the device in the stream being used for the cudaMemset() operation (2); otherwise, an error is returned.
When data is accessed from the device either by cudaMemcpy* or cudaMemset*, the stream of operation is considered to be active on the GPU. During this time, any CPU access of data that is associated with that stream or data that has global visibility, will result in a segmentation fault if the GPU has a zero value for the device attribute concurrentManagedAccess. The program must synchronize appropriately to ensure the operation has completed before accessing any associated data from the CPU.
Coherently accessible from the host in a given stream means that the memory neither has global visibility nor is it associated with the given stream.
Coherently accessible from the device in a given stream means that the memory either has global visibility or is associated with the given stream.
20. Lazy Loading
20.1. What is Lazy Loading?
Lazy Loading delays loading of CUDA modules and kernels from program initalization closer to kernels execution. If a program does not use every single kernel it has included, then some kernels will be loaded unneccesarily. This is very common, especially if you include any libraries. Most of the time, programs only use a small amount of kernels from libraries they include.
Thanks to Lazy Loading, programs are able to only load kernels they are actually going to use, saving time on initialization. This reduces memory overhead, both on GPU memory and host memory.
Lazy Loading is enabled by setting the CUDA_MODULE_LOADING environment variable to LAZY.
Firstly, CUDA Runtime will no longer load all modules during program initialization, with the exception of modules containing managed variables.
Each module will be loaded on first usage of a variable or a kernel from that module.
This optimization is only relevant to CUDA Runtime users, CUDA Driver users who use cuModuleLoad are unaffected. This optimization shipped in CUDA 11.8.
The behavior for CUDA Driver users who use cuLibraryLoad to load module data into memory can be changed by
setting the CUDA_MODULE_DATA_LOADING environment variable.
Secondly, loading a module (cuModuleLoad*() family of functions) will not be loading kernels immediately,
instead it will delay loading of a kernel until cuModuleGetFunction() is called.
There are certain exceptions here, some kernels have to be loaded during cuModuleLoad*(),
such as kernels of which pointers are stored in global variables.
This optimization is relevant to both CUDA Runtime and CUDA Driver users.
CUDA Runtime will only call cuModuleGetFunction() when a kernel is used/referenced for the first time.
This optimization shipped in CUDA 11.7.
Both of these optimizations are designed to be invisible to the user, assuming CUDA Programming Model is followed.
20.2. Lazy Loading version support
Lazy Loading is a CUDA Runtime and CUDA Driver feature. Upgrades to both might be necessary to utilize the feature.
20.2.1. Driver
Lazy Loading requires R515+ user-mode library, but it supports Forward Compatibility, meaning it can run on top of older kernel mode drivers.
Without R515+ user-mode library, Lazy Loading is not available in any shape or form, even if toolkit version is 11.7+.
20.2.2. Toolkit
Lazy Loading was introduced in CUDA 11.7, and received a significant upgrade in CUDA 11.8.
If your application uses CUDA Runtime, then in order to see benefits from Lazy Loading your application must use 11.7+ CUDA Runtime.
As CUDA Runtime is usually linked statically into programs and libraries, this means that you have to recompile your program with CUDA 11.7+ toolkit and use CUDA 11.7+ libraries.
Otherwise you will not see the benefits of Lazy Loading, even if your driver version supports it.
If only some of your libraries are 11.7+, you will only see benefits of Lazy Loading in those libraries. Other libraries will still load everything eagerly.
20.2.3. Compiler
Lazy Loading does not require any compiler support. Both SASS and PTX compiled with pre-11.7 compilers can be loaded with Lazy Loading enabled, and will see full benefits of the feature. However, 11.7+ CUDA Runtime is still required, as described above.
20.3. Triggering loading of kernels in lazy mode
Loading kernels and variables happens automatically, without any need for explicit loading. Simply launching a kernel or referencing a variable or a kernel will automatically load relevant modules and kernels.
However, if for any reason you wish to load a kernel without executing it or modifying it in any way, we recommend the following.
20.3.1. CUDA Driver API
Loading of kernels happens during cuModuleGetFunction() call.
This call is necessary even without Lazy Loading, as it is the only way to obtain a kernel handle.
However, you can also use this API to control with finer granularity when kernels are loaded.
20.3.2. CUDA Runtime API
CUDA Runtime API manages module management automatically,
so we recommend simply using cudaFuncGetAttributes() to reference the kernel.
This will ensure that the kernel is loaded without changing the state.
20.4. Querying whether Lazy Loading is Turned On
In order to check whether user enabled Lazy Loading, CUresult cuModuleGetLoadingMode ( CUmoduleLoadingMode* mode ) can be used.
It’s important to note that CUDA must be initialized before running this function. Sample usage can be seen in the snippet below.
#include "cuda.h"
#include "assert.h"
#include "iostream"
int main() {
CUmoduleLoadingMode mode;
assert(CUDA_SUCCESS == cuInit(0));
assert(CUDA_SUCCESS == cuModuleGetLoadingMode(&mode));
std::cout << "CUDA Module Loading Mode is " << ((mode == CU_MODULE_LAZY_LOADING) ? "lazy" : "eager") << std::endl;
return 0;
}
20.5. Possible Issues when Adopting Lazy Loading
Lazy Loading is designed so that it should not require any modifications to applications to use it. That said, there are some caveats, especially when applications are not fully compliant with CUDA Programming Model.
20.5.1. Concurrent Execution
Loading kernels might require context synchronization. Some programs incorrectly treat the possibility of concurrent execution of kernels as a guarantee. In such cases, if program assumes that two kernels will be able to execute concurrently, and one of the kernels will not return without the other kernel executing, there is a possibility of a deadlock.
If kernel A will be spinning in an infinite loop until kernel B is executing. In such case launching kernel B will trigger lazy loading of kernel B. If this loading will require context synchronization, then we have a deadlock: kernel A is waiting for kernel B, but loading kernel B is stuck waiting for kernel A to finish to synchronize the context.
Such program is an anti-pattern, but if for any reason you want to keep it you can do the following:
preload all kernels that you hope to execute concurrently prior to launching them
run application with
CUDA_MODULE_DATA_LOADING=EAGERto force loading data eagerly without forcing each function to load eagerly
20.5.2. Allocators
Lazy Loading delays loading code from initialization phase of the program closer to execution phase. Loading code onto the GPU requires memory allocation.
If your application tries to allocate the entire VRAM on startup, for example, to use it for its own allocator, then it might turn out that there will be no more memory left to load the kernels. This is despite the fact that overall Lazy Loading frees up more memory for the user. CUDA will need to allocate some memory to load each kernel, which usually happens at first launch time of each kernel. If your application allocator greedily allocated everything, CUDA will fail to allocate memory.
Possible solutions:
use
cudaMallocAsync()instead of an allocator that allocates the entire VRAM on startupadd some buffer to compensate for the delayed loading of kernels
preload all kernels that will be used in the program before trying to initialize your allocator
20.5.3. Autotuning
Some applications launch several kernels implementing the same functionality to determine which one is the fastest. While it is overall advisable to run at least one warmup iteration, it becomes especially important with Lazy Loading. After all, including time taken to load the kernel will skew your results.
Possible solutions:
do at least one warmup interaction prior to measurement
preload the benchmarked kernel prior to launching it
21. Notices
21.1. Notice
This document is provided for information purposes only and shall not be regarded as a warranty of a certain functionality, condition, or quality of a product. NVIDIA Corporation (“NVIDIA”) makes no representations or warranties, expressed or implied, as to the accuracy or completeness of the information contained in this document and assumes no responsibility for any errors contained herein. NVIDIA shall have no liability for the consequences or use of such information or for any infringement of patents or other rights of third parties that may result from its use. This document is not a commitment to develop, release, or deliver any Material (defined below), code, or functionality.
NVIDIA reserves the right to make corrections, modifications, enhancements, improvements, and any other changes to this document, at any time without notice.
Customer should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
NVIDIA products are sold subject to the NVIDIA standard terms and conditions of sale supplied at the time of order acknowledgement, unless otherwise agreed in an individual sales agreement signed by authorized representatives of NVIDIA and customer (“Terms of Sale”). NVIDIA hereby expressly objects to applying any customer general terms and conditions with regards to the purchase of the NVIDIA product referenced in this document. No contractual obligations are formed either directly or indirectly by this document.
NVIDIA products are not designed, authorized, or warranted to be suitable for use in medical, military, aircraft, space, or life support equipment, nor in applications where failure or malfunction of the NVIDIA product can reasonably be expected to result in personal injury, death, or property or environmental damage. NVIDIA accepts no liability for inclusion and/or use of NVIDIA products in such equipment or applications and therefore such inclusion and/or use is at customer’s own risk.
NVIDIA makes no representation or warranty that products based on this document will be suitable for any specified use. Testing of all parameters of each product is not necessarily performed by NVIDIA. It is customer’s sole responsibility to evaluate and determine the applicability of any information contained in this document, ensure the product is suitable and fit for the application planned by customer, and perform the necessary testing for the application in order to avoid a default of the application or the product. Weaknesses in customer’s product designs may affect the quality and reliability of the NVIDIA product and may result in additional or different conditions and/or requirements beyond those contained in this document. NVIDIA accepts no liability related to any default, damage, costs, or problem which may be based on or attributable to: (i) the use of the NVIDIA product in any manner that is contrary to this document or (ii) customer product designs.
No license, either expressed or implied, is granted under any NVIDIA patent right, copyright, or other NVIDIA intellectual property right under this document. Information published by NVIDIA regarding third-party products or services does not constitute a license from NVIDIA to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property rights of the third party, or a license from NVIDIA under the patents or other intellectual property rights of NVIDIA.
Reproduction of information in this document is permissible only if approved in advance by NVIDIA in writing, reproduced without alteration and in full compliance with all applicable export laws and regulations, and accompanied by all associated conditions, limitations, and notices.
THIS DOCUMENT AND ALL NVIDIA DESIGN SPECIFICATIONS, REFERENCE BOARDS, FILES, DRAWINGS, DIAGNOSTICS, LISTS, AND OTHER DOCUMENTS (TOGETHER AND SEPARATELY, “MATERIALS”) ARE BEING PROVIDED “AS IS.” NVIDIA MAKES NO WARRANTIES, EXPRESSED, IMPLIED, STATUTORY, OR OTHERWISE WITH RESPECT TO THE MATERIALS, AND EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL NVIDIA BE LIABLE FOR ANY DAMAGES, INCLUDING WITHOUT LIMITATION ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF ANY USE OF THIS DOCUMENT, EVEN IF NVIDIA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Notwithstanding any damages that customer might incur for any reason whatsoever, NVIDIA’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms of Sale for the product.
21.2. OpenCL
OpenCL is a trademark of Apple Inc. used under license to the Khronos Group Inc.
21.3. Trademarks
NVIDIA and the NVIDIA logo are trademarks or registered trademarks of NVIDIA Corporation in the U.S. and other countries. Other company and product names may be trademarks of the respective companies with which they are associated.