Web UI:

• Resolved issues with commands button failure states
• Fix ability to flash CC2652 if no revision design detected
• Add ESP restart after Zigbee flashing
• Add "Erase complete" message before Zigbee flashing

Code:

• Corrected errors with the trash ZB version
• Fixed ZB version detection during boot
• Ensured status returns for both ZB LED toggle and firmware check buttons

Web UI:

• Automatic Zigbee OTA for corresponding Zigbee module

Code:

• Add RfStar (lauchpad) and Ebyte (others) identifying for CC2652P2

Web UI:

• Add CC2652 role select dialog on Zigbee page
• Add Thread section to Zigbee firmware version select dialog

Code:

Web UI:

• Fix Git install latest version cmd
• Fix reboot timeout modal window
• Adjust min length of MQTT user and password (4-50 symbols now)
• Change "Connected" to "Connection status" (MQTT and VPN cards on root page)
• Fix russian translate Thanks to @artbrayko 🚀 PR #5
• Add file delete option in file browser
• Small translate fixes

Code:

• Add model display over MQTT - use board name
• Add device name display over MQTT - use hostname
• Fix network access when in USB mode with keep web server option
• Add DNS name over WiFi
• Add file delete API cmd

Web UI:

• RU translation correction. Thanks to @artbrayko 🚀 PR #4

Code:

• Fix two gateways MQTT conflict

Web UI:

• Ukrainian 🇺🇦 translation fully rewrote. Thanks to @artbrayko 🚀 PR #2, #3

Code:

• Fix mDNS resolver
• Replace 99% of DEBUG_PRINT to LOGI/LOGD/LOGW
• Print socket client IP in web console while connect
• Move all peripherals functions to per.cpp
• Fix file save
• Make button polarity option works
• Fix GitHub update logs print

Web UI:

• Zigbee flashing modal window
• Add Zigbee IEEE
• Add Zigbee flash size
• OTA Zigbee from Github
• Fix login with non default login/pass
• Fix translate messages on login page
• Add new WireGuard options

Code:

• CC2652 and CC2652P7 OTA firmware update
• Implemented ESP32 firmware update check on the device
• Introduced MQTT sensor for ESP32 update availability #20 p.s. I think that update installation must goes on web under user control
• Move zbVer to CCTools
• Add button polarity support
• Fix old firmware config read
• Add default if not set mqtt update and reconnect intervals
• Fix WireGuard

Build and Development:

• New branch for Zigbee bin files and manifest.json

Web UI:

• Fix OTA from GitHub ESP32 selected version
• Fix OTA from GitHub ESP32 latest version

Code:

• Add fetch latest bin file link from Github on ESP32 directly

Build and Development:

• Using releases branch for manifest and full firmware files

Web UI:

• Reworked about page
• Translate about page
• Beautify about page
• Add missing placeholders and titles

Code:

• Rework MQTT structure
• Add more MQTT sensors (Network statuses, Zigbee versions)
• Remove arabian translate cause no RTL support, yet
• Extend WG settings

Build and Development:

• Fix Github action release post badge with download counts position

Docs:

Hardware:

WebUI:

• Introduced login page, replacing the basic authentication window.
• Added a button to toggle password visibility.
• Segregated all LED-related options into a separate card.
• Implemented night mode configuration options for LEDs on the General page.
• Incorporated emoji as identifying buttons for LEDs.
• Updated status bar icons to reflect the current state.
• Enabled version selection for ESP32 updates via the web interface.
• Rectified issues with the color modal and tables.
• Reorganized buttons on the Tools page for improved usability.
• Introduced a factory reset button on the Tools page.
• Added language selection in the side navigation menu.
• Integrated i18next for translation support.
• Adapted static HTML pages and all JavaScript for compatibility with i18next.
• Conditionally hid LEDs and UART mode options based on pin availability in the configuration.
• Refined input placeholders, patterns, and title attributes, specifically on the MQTT page.
• Implemented toasts for ESP update notifications and beta feedback submissions.
• ESP32 updating modal window with confirmation before start
• All devices stats sends to web client in clean values, formatting goes in the browser.
• Add clock in header navbar
• Add tooltips to navbar icons and clock
• Add progress bars to visualize ESP temp, used heap and RSSI
• Add NVS and FS stats on root page (with progress bars)

Code:

• Set default values for mqttTopic and Husarnet hostname.
• Configured MQTT server by FQDN (see issue #33 @ UZG-01).
• Relocated configHw.json to the root folder for easier access.
• Purged debug logs for cleaner codebase.
• Addressed temperature offset configuration issues during board configuration search.
• Consolidated all LED actions into a single function for efficiency.
• Corrected minor errors encountered during configuration migration.
• Overhauled the factory reset process for reliability.
• Added an API route for factory resets to streamline the process.
• Established webserver routes for locating JSON files and facilitating i18next.
• Refined the ESP32 update process indication through the /events route.
• Moved constants to separate files (keys.cpp and keys.h) for code maintainability and memory optimization.
• Fix #15 @ ZigStarGW-FW
• Fix #30 @ UZG-01
• WiFi and Ethernet works at the same time with auto AP starting if any error occurs
• Rework LED logic using background tasks (indicates modes, connection state, zigbee errors, support disabling)
• Rework BTN logic
  • short click disable/enable LEDs for current session (only if NOT fully disabled)
  • Long click over 3sec - toggle working mode NETWORK/USB, flashing 1Hz when ready to release
  • Long click over 5sec - enable Zigbee BSL mode, flashing 3Hz when ready to release

Build and Development:

• Applied minification to JavaScript and JSON files for optimized performance.
• Reorganized folders within websrc and webh dirs for better project structure.
• Add i18n Ally config for VSCode showing translations
• Script for generate keys.h

Docs:

Hardware: