No results found.

Contents

  1. Overview
  2. Nodes
  3. Quickstart
    1. Installation
    2. Run Simulator
    3. Manual control
      1. PS3 joystick control
      2. terminal command control
    4. Robot Sensor Monitoring
  4. Troubleshooting
  5. Notes
  6. License
  7. Contact

Overview

This package contains the implementation of a gazebo simulator for the Ardrone 2.0 and has been written by Hongrong Huang and Juergen Sturm of the Computer Vision Group at the Technical University of Munich.

This package is based on the ROS package tu-darmstadt-ros-pkg by Johannes Meyer and Stefan Kohlbrecher and the Ardrone simulator which is provided by Matthias Nieuwenhuisen.

The simulator can simulate both the AR.Drone 1.0 and 2.0, the default parameters however are optimized for the AR.Drone 2.0 by now. You can fine more details on my report.

The simulator is on the simulator_gazebo platform. Before using this simulator, it is recommended to get know more about the simulator by reading gazebo tutorials. Additionaly, you can get more information about flying robots and AR.Drone from the lecture visual navigation for flying robots.

Real quadrocopter structure: The AR.Drone2.0 connects with a computer via WIFI, while the user manipulate a joystick which is via USB connecting with the same computer. ROS is running in this computer. real_structure.png

Simulated quadrocopter manipulation: After the simulation is started. The user can use a joystick to manipulate the simulated quadrocopter. The botton functions of the joystick are the same as manipulating the real AR.Drone2.0. sim_structure.png

The following video shows an experiment about how the simulator works compared to the real AR.Drone.

Nodes

  • gazebo, ground_truth_to_tf, robot_state_publisher: The simulator program.

  • rviz: A 3d visualization environment for the simulated flying robots.

  • joy_node, ardrone_joystick: They are the joystick driver and the command information translator for the Ardrone.

Quickstart

Installation

Your computer should have ROS and simulator gazebo package installed. The ROS version should be fuerte and the Gazebo version of the ROS plugin (which is, for fuerte, 1.0.2). Be sure that rviz is also installed.

1. Install the following additional required packages in your ROS workspace.

  • ardrone_autonomy package: This is the official driver for the real Ardrone flying robots. 

$ cd ~/catkin_ws/src
$ git clone https://github.com/AutonomyLab/ardrone_autonomy.git -b indigo-devel
$ cd ~/catkin_ws
$ rosdep install --from-paths src -i
$ catkin_make
  • joy_node and ardrone_joystick packages 

# cd into ros root dir
roscd

# clone repository
svn checkout https://svncvpr.informatik.tu-muenchen.de/cvpr-ros-pkg/trunk/ardrone_helpers

# add to ros path (if required)
export ROS_PACKAGE_PATH=$ROS_PACKAGE_PATH:`pwd`/ardrone_helpers

# build package
rosmake ardrone_joystick
rosmake joy

2. Install tum_simulator package: 

# cd into ros root dir
roscd

# clone repository
git clone https://github.com/tum-vision/tum_simulator.git

# add to ros path (if required)
export ROS_PACKAGE_PATH=$ROS_PACKAGE_PATH:`pwd`/tum_simulator

# build package
rosmake cvg_sim_gazebo_plugins
rosmake message_to_tf

Run Simulator

You can start the simulator with one of the following flying scenario: 

roslaunch cvg_sim_test 3boxes_room.launch

roslaunch cvg_sim_test outdoor_flight.launch

roslaunch cvg_sim_test tum_kitchen.launch

roslaunch cvg_sim_test tum_kitchen_with_marker.launch

roslaunch cvg_sim_test garching_kitchen.launch

roslaunch cvg_sim_test garching_kitchen_with_marker.launch

roslaunch cvg_sim_test wg_collada.launch

roslaunch cvg_sim_test competition.launch

Manual control

PS3 joystick control

You can manipulate the quadrocopter with joysticks after launching: 

roslaunch ardrone_joystick teleop.launch
  • The L1 button starts the quadrocopter. It also works as a deadman button so that the robot will land if you release it during flight.
  • The left stick can be used to control the vx/vy-velocity. Keep in mind that these velocities are given in the local frame of the drone!
  • The right stick controls the yaw-rate and the altitude.
  • The select button can be used to switch between the two cameras.

terminal command control

  • take off 

rostopic pub -1 /ardrone/takeoff std_msgs/Empty
  • land 

rostopic pub -1 /ardrone/land std_msgs/Empty
  • switch camera 

rosservice call /ardrone/togglecam
  • motion 

# fly forward
rostopic pub -r 10 /cmd_vel geometry_msgs/Twist  '{linear:  {x: 1.0, y: 0.0, z: 0.0}, angular: {x: 0.0,y: 0.0,z: 0.0}}'

# fly backward
rostopic pub -r 10 /cmd_vel geometry_msgs/Twist  '{linear:  {x: -1.0, y: 0.0, z: 0.0}, angular: {x: 0.0,y: 0.0,z: 0.0}}'

# fly to left 
rostopic pub -r 10 /cmd_vel geometry_msgs/Twist  '{linear:  {x: 0.0, y: 1.0, z: 0.0}, angular: {x: 0.0,y: 0.0,z: 0.0}}'

# fly to right 
rostopic pub -r 10 /cmd_vel geometry_msgs/Twist  '{linear:  {x: 0.0, y: -1.0, z: 0.0}, angular: {x: 0.0,y: 0.0,z: 0.0}}'

# fly up 
rostopic pub -r 10 /cmd_vel geometry_msgs/Twist  '{linear:  {x: 0.0, y: 0.0, z: 1.0}, angular: {x: 0.0,y: 0.0,z: 0.0}}'

# fly down 
rostopic pub -r 10 /cmd_vel geometry_msgs/Twist  '{linear:  {x: 0.0, y: 0.0, z: -1.0}, angular: {x: 0.0,y: 0.0,z: 0.0}}'

# counterclockwise rotation
rostopic pub -r 10 /cmd_vel geometry_msgs/Twist  '{linear:  {x: 0.0, y: 0.0, z: 0.0}, angular: {x: 0.0,y: 0.0,z: 1.0}}'

# clockwise rotation
rostopic pub -r 10 /cmd_vel geometry_msgs/Twist  '{linear:  {x: 0.0, y: 0.0, z: 0.0}, angular: {x: 0.0,y: 0.0,z: -1.0}}'

# stop
rostopic pub -r 10 /cmd_vel geometry_msgs/Twist  '{linear:  {x: 0.0, y: 0.0, z: 0.0}, angular: {x: 0.0,y: 0.0,z: 0.0}}'

Robot Sensor Monitoring

For observation you can use following commands: 

# The output camera
rosrun image_view image_view image:=/ardrone/image_raw

# The front camera
rosrun image_view image_view image:=/ardrone/front/image_raw

# The buttom camera
rosrun image_view image_view image:=/ardrone/bottom/image_raw

# The height sensor
rostopic echo /sonar_height

#The navigation info
rostopic echo /ardrone/navdata

#A launch file for joystick drivers and image view nodes
roslaunch cvg_sim_test demo_tool.launch

OR using the rviz tool.

Troubleshooting

Simulator starting error

If you get the following error message when you start the simulator, you should close all the other nodes which connect the simulator by some ROS topices. And try again to launch the simulator file. Furtherm more, you can terminate your ROS master, even close all your terminal windows and restart the simulator again. 

[gazebo-1] process has died [pid 1297, exit code 134, cmd /opt/ros/fuerte/stacks/simulator_gazebo/gazebo/scripts/gazebo /usr/stud/huangho/ros_workspace/cvpr-ros-internal/trunk/cvg_simulator/cvg_sim_gazebo/worlds/garching_kitchen.world __name:=gazebo __log:=/usr/stud/huangho/.ros/log/0a453de4-47a9-11e2-bff7-d4bed998ce90/gazebo-1.log].
log file: /usr/stud/huangho/.ros/log/0a453de4-47a9-11e2-bff7-d4bed998ce90/gazebo-1*.log

Cannot control drone via joystick
  • check, whether you are using the correct joystick
  • check, whether you joystick driver is running properly, and sending correct rostopics 

rostopic echo /joy
  • check, whether the ardrone_joystick node is running properly by checking the following topics 

rostopic echo /cmd_vel
rostopic echo /ardrone/land
rostopic echo /ardrone/reset
rostopic echo /ardrone/takeoff

The simulated ardrone doing something oddly
  • use rxgraph to see whether some other nodes send wrong command topics.

Cannot run the package (From Patrick Lehner)

- installing Gazebo 1.6.0 is not required (though its dependency libbullet might be), since launching gazebo via ROS will always use the Gazebo version of the ROS plugin (which is, for fuerte, 1.0.2)

- Gazebo (and, by extension, the TUM simulator) is very picky about the installed graphics card; as far as we can tell at this time, only Nvidia cards really work (and only with the restricted Nvidia driver), ATI/AMD and Intel cards will not work, since the drivers do not have all the OpenGL/FireGL capabilities that Gazebo requires. In case of ATI drivers, we observed error messages about missing GL features, but with the Intel drivers, Gazebo simply segfaults (or rather, the Intel driver segfaults and Gazebo quits without any meaningful error message). - the ardrone_autonomy driver (i.e. the ardrone_driver executable) is not compatible with 64-bit systems (see https://projects.ardrone.org/issues/show/140 )

Notes

Because of the limitation of the gazebo simulator, not all the AD.Drone sensors are 100% modeled in the simulation.

Compared to the real AD.Drone ardrone_autonomy driver, the simulation can also send as the real AD.Drone with the same names:

  • Front camera information and image data
  • Bottom camera information and image data
  • Activated camera information and image data
  • IMU data
  • tf data
  • Navigation data

The navigation data /ardrone/navdata includes many information.

  • message time stamp
  • message frame id
  • fly mode (partly)
  • battery percentage
  • position, rotation
  • velocity
  • acceleration

are implemented.

  • magnet info
  • pressure
  • wind information
  • tags

are not implemented.

The following sensors are implemented in the simulation:

  • camera sensors
  • altitude sensor
  • IMU sensor

License

We release our code under the BSD license. However, as we strongly build upon Gazebo and HectorSLAM, corresponding licenses apply as well.

Contact

In case of problems, questions, or suggestions, please contact Hongrong Huang <[email protected]> or Jürgen Sturm <[email protected]>.

Wiki: tum_simulator (last edited 2018-02-17 01:20:17 by GustavoBertoli)

Except where otherwise noted, the ROS wiki is licensed under the
Creative Commons Attribution 3.0